Upgradation from Ashram School to High School at Mahadeiput Ashram School, Koraput, Odisha

No Item of Work Unit Quantity Rate Amount

1 Site Clearance

Cleaning & grubbing road land including uprooting

rankvegetation, grass ,bushes, shurbes, sapling and trees girth

upto 300mm, removal of stumps of trees cut earier and

disposal of unsevicable materials and stacking of servicable sqm 984.56 9.74 9584.69

materials to be used or auctioned up to lead of 1000 meters

including removal and disposal of top organic soil not exceeding

150mm thickness.

2 Earthwork Excavation

Earth work in excavation of foundation in HARD soil within 50m

lead and 1.5m lift including rough dressing and breaking clods

a) to maximum 5cm. To 7cm. And laying in layers not exceeding Cum 547.53 319.66 175024.53

0.3m in depth and as per specification complete.

3 Sand Filling

Filling in foundation, trenches and plinth with river sand, well

watered and compacted in layers of 1.8 mtr, with top surface

dressed and leveled to proper gradient including cost of all

materials, conveyance, all taxes and royalties, loading and Cum 606.89 2348.01 1424984.52

unloading, including cost of all labour, sundries, T & P etc. All

complete as per directions of the Engineer -in-charge.

4 Back Filling

Filling available excavated earth (excluding rock) in trenches

plinth sides of foundation etc. in layers not exceeding 20 cm in

depth , consolidating each deposited layers by ramming and

watering, lead up to 50m and lift up to 1.5 mt etc. including cum 304.55 177.59 54085.03

cost of all labour, sundries T & P etc complete in all respect as

per the direction of Engineer-In-Charge.

Cement concrete of proportion (1:4:8) in foundation and floors

using 4cm size clean hard black crusher broken granite stone

metal of approved quality and from approved quarry including

hoisting, lowering and laying concrete in layers not exceeding

15 cm. (6") thick to the required level ramming, watering, Cum 250.44 7367.35 1845080.04

curing etc. complete including cost, conveyance, royalties of all

materials with all labour and T&P required for the work etc.

complete in all respect and as per the direction of the Engineer-

6 Anti-termite Treatment

Providing & applying of pre constructional anti-termite

treatment Confirming to IS 6313 (Part-II) and creating

chemical barrier under and around the column pits, wall

trenches, basement excavation top surface of plinth filling,

junction of wall and floors along with external perimeters of

building, expansion joints, surrounding the pipes and conducts

etc. at the rate at 7 ,5 liter per sqm on vertical surface and 5.0

liter per sqm on horizontal surface. Chemicals:- Imidachloprid

30.5 SC , Doses: - 2.1 ml per lit of water cost of all materials,

labour,conveyance, T&P , all taxes and hire charges of

machinaries as per direction of Engineer-incharge. (Make :- HI-

Solution or Smart Care Pest Control or Bharat Pest Eradicators)

7 Fly Ash brick(1:6)

Fly Ash brick masonry in cement mortar (1:6) in Substructure

using Fly Ash bricks of 23 Cm. x 11 Cm. x 8 Cm. size having a

crushing strength of not less than 75 kg./sqcm with

dimensional tolerance ± 2% including splays cutting circular

moulding chamfering and corbelling and similar such type of

works with all necessary projections watering and curing after

immersing the bricks in water at least for six hours before use

including cost, conveyance, royalties and taxes of all materials

with all labour,labour cess and T & P required for the work

complete in all respect as per direction of Engineer-in-Charge.

Digitally signed by JAYA

No Item of Work Unit Quantity Rate Amount

Providing, lifting, hoisting and laying Reinforced cement

concrete of M-25 grade as per approved designs and drawings

having a minimum compressive strength (in work test) 250 Kg.

/ Square cm. in 15 cm. cubes at 28 days after mixing and test

conducted in accordance with I.S. 516 using 12 mm. to 20 mm.

size black hard crushed broken granite stone chips and

screened and washed sharp sand for mortar of approved quality

from approved quarry,

washed and cleaned ( 20mm. size chips not to exceeds 25 %)

to be mixed in concrete mixture with Portland slag cement

(PSC) including hoisting, lowering, laying and compaction

concrete by using vibrators, watering and curing for 28 days,

centering and shuttering then after dismantling and removing

debris from the work site and finishing the exposed surface

smooth providing grooves or beads wherever necessary

including cost, conveyance, loading, unloading, royalties and

taxes of all materials and cost of all labours, sundries, T & P

required of the work etc.complete in all respect as directed by

the Engineer-in-Charge. But excluding cost and conveyance of

M.S. rods or Tor steel and binding wires and labour charges for

straightening, cutting, bending etc. of M.S. rods or tor steel

tying the grills and placing in proper position.

Foundation and plinth

Lift Pit Slab Cum 1.25 9096.31 11370.39

Column (Below Plinth) Cum 16.77 19885.02 333471.75

Staircase Cum 4.52 19738.17 89265.86

9 Reinforcement

Supplying Cutting, straightening coiled or bent up M.S. Rod or

tor steel of primary steel producers such as SAIL / Tiscon /

RINL / JINDAL STEEL / SHYAM STEEL (grade Fe-500D) etc.

including bending, binding, welding and jointing if necessary

and tying the grills and placing in position as required for R.C.C.

Work and for providing fan hooks as required, hoisting,

lowering, laying including cost, conveyances, taxes of M.S. Rod

or tor steel and binding wires of 18 to 20 gauge and labour

required for the work for bending, binding and tying the grills in

all floors with labour cess etc. (payment will be made on

standard weight of B.I.S. for M.S. Rods or tor steel only) etc.

complete as per specification & direction of Engineer-in-charge.

Foundation and plinth qtl 114.75 10443.07 1198342.37

Second Floor qtl 70.11 10522.34 737723.06

Digitally signed by JAYA

No Item of Work Unit Quantity Rate Amount

Terrace Floor qtl 16.96 10564.98 179182.00

10 FLY ASH BRICK(1:6)

Fly Ash brick masonry in cement mortar (1:6) in super

structure using Fly Ash bricks of 23 Cm. x 11 Cm. x 8 Cm size

having a crushing strength of not less than 75 kg./sqcm with

dimensional tolerance ± 2% including splays cutting circular

moulding chamfering and corbelling and similar such type of

works with all necessary projections watering and curing after

immersing the bricks in water at least for six hours before use

including cost, conveyance, royalties and taxes of all materials

with all labour,labour cess and T & P required for the work

complete in all respect as per direction of Engineer-in-Charge.

Ground Floor cum 119.87 7036.41 843447.02

Second Floor cum 85.75 7977.08 684030.50

Terrace Floor cum 35.68 8555.72 305268.08

11 FLY ASH BRICK(1:4)

Providing Fly ash bricks masonry work using 23 Cm. x 11 Cm. x

8 Cm having crushing strength not less than 75Kg/Sqcm in

cement mortar (1:4). Immersing the bricks in water before use

in all necessary projection splays cutting, circular moulding,

corbelling etc. Including cost of conveyance ,taxes & royalties,

loading and unloading of all materials & cost of all labour,

scaffolding ,watering & curing ,sundries, T & P etc. complete as

per the direction of Engineer-in-charge .

Ground Floor cum 10.19 7334.21 74732.86

First Floor cum 4.64 7771.73 36055.42

12 16 mm Plastering

Providing 16 mm thick cement plaster with cement mortar of

mix (1:6) with screened and washed sharp sand for mortar and

finished smooth to the rough surface of walls in all heights after

racking out joints including watering and curing, rounding of

corners, providing grooves where ever necessary with cost,

conveyance, royalties of all materials with cost of all

labour,labour cess, T&P, and scaffolding required for the work

etc. complete in all respect as directed by the Engineer in

Ground Floor sqm 316.06 349.76 110546.00

First Floor sqm 313.00 363.25 113697.26

Second Floor sqm 355.76 377.40 134262.10

Terrace Floor sqm 226.57 392.26 88873.35

13 12 mm Plastering

Providing 12 mm thick cement plaster with cement mortar of

mix (1:6) with screened and washed sharp sand for mortar and

finished smooth to the rough surface of walls in all heights after

racking out joints including watering and curing, rounding of

corners, providing grooves where ever necessary with cost,

conveyance, royalties of all materials with cost of all

labour,labour cess, T&P, and scaffolding required for the work

etc. complete in all respect as directed by the Engineer in

Ground Floor sqm 1491.63 246.92 368305.82

Second Floor sqm 384.33 257.90 99117.72

Terrace Floor sqm 245.08 263.64 64612.47

14 6 mm Plastering

Providing 6 mm thick cement plaster with cement mortar of mix

(1:4) with screened and washed sharp sand for mortar and

finished smooth to R.C.C. work after closed deep chipping &

slurry treatment including watering and curing, rounding of

corners, providing grooves where ever necessary with cost,

conveyance, royalties of all materials with cost of all labour,

T&P, and scaffolding required for the work etc. complete in all

respect as directed by the Engineer in charge.

Ground Floor sqm 732.47 262.08 191962.96

First Floor sqm 737.88 268.41 198057.77

Second Floor sqm 282.78 274.94 77747.53

Terrace Floor sqm 57.12 281.68 16089.44

15 Water Proofing

Digitally signed by JAYA

No Item of Work Unit Quantity Rate Amount

Waterproofing application:- Providing and application of two

component polymer modified flexible cementitious

waterproofing coating at a thickness of 1.5 -2.5 mm The

membrane should have Elongation equal or more than: 30% ,

Crack Bridging ability : Up to 1 mm, Adhesive strength: 1.0

N/mm ² @ 28d, Tensile elongation: 60% @ 20 ° C, Shore A

Hardness >85 (between 3 - 7 days) etc. as per direction of

E.I.C (For longer span, in terrace panel of 4m*4m should be

done by groove cutting, and filling with PU Sealant)(Make:MYK

/ Fosroc/Pidilite) sqm 428.28 548.23 234795.09

16 Grading Plaster

Providing 2.5cm thick Grading Concrete over roof slab with

cement concrete (1:2:2) using 6mm size black hard granite

crusher broken chips and screened & washed sharp sand for

mortar and finished smooth to the rough surface of slab

including watering and curing with cost, conveyance, royalties

of all materials with cost of all labour, labour cess and T&P

required for the work etc. complete in all respect as directed by

the Engineer in charge.

Second Floor sqm 428.28 586.88 251351.02

17 Industrial vitrified tiles

Supplying, fitting & fixing of Industrial vitrified tiles (40x40)cm

in floors of approved make laid on 20 mm thick cement mortar

(1:4) (1 cement : 4 course sand) and filling joints with slurry

including cost of all materials, labour T&P etc required for the

work all complete as per direction of the Engineer-in-charge

Ground Floor sqm 836.81 1669.04 1396668.69

18 Vitrified Floor Tiles

Providing full body matt finish vitrified tile flooring using vitrified

tiles having thickness of min 10mm conforming to IS 13755 of

1200x600 (shade to be decided as per Ama Hospital scheme)

(homogeneous) of premium quality (JOHNSON / SOMANY/

KAJARIA/ RAK) in floors, treads on steps and landings on

20mm thick bed of cement mortar of mix (1:4) laid in proper

slope and gradient with screened and washed sharp sand for

mortar and fixing with neat white cement slurry,grouting the

joints with neat white cement slurry mixed with required

quantities of pigments of approved make to match the shades

of the vitrified tile if required , watering and curing for 21 days,

including cost, conveyance, loading, unloading, royalties and

taxes of all materials, cost of all labour,Labour cess , sundries,

T&P required for the work, complete in all respect as per

specification and direction of Engineer-in-charge.

Ground Floor sqm 377.99 1564.99 591543.65

Second Floor sqm 270.79 1596.16 432216.88

19 Vitrified Floor Skirting

Providing, fitting, fixing vitrified tiles of premium grade having

thickness 8mm to 10mm confirming to IS 13756 of size 600mm

x 600mm Plain (Ivory) of approved make (JOHNSON/ SOMANY/

KAJARIA/ RAK) as directed by Engineer-in-charge in dados

skirting and risers of steps on 12mm thick cement plaster (1:3)

jointed with neat cement slurry mixed with pigment to match

the shades of the tiles including rubbing and polishing etc.

complete with cost, conveyance, royalties of all materials all

labour, labour cess complete in all respects.

Ground Floor sqm 47.96 1520.89 72943.41

First Floor sqm 46.24 1544.36 71416.75

Second Floor sqm 26.85 1567.83 42092.25

20 Granite Flooring

Digitally signed by JAYA

No Item of Work Unit Quantity Rate Amount

Fixing Granite Tiles of approved dimension area above 0.4 sqm

(20mm thick) in floor, treads of steps and landing on 20mm

thick bed of cement mortar (1:4) jointed with neat cement

slurry mixed with pigment to match the shades of the tiles

including rubbing and polishing etc. complete with cost,

conveyance, royalties of all materials complete in all respects as

per direction of Engineer-in-Charge.

Ground Floor sqm 83.62 3368.64 281685.37

First Floor sqm 65.60 3384.23 222001.14

Second Floor sqm 56.40 3399.82 191749.62

21 Granite Skirting

Fixing Granite Tiles of approved dimension area above 0.4 sqm

(20mm thick) in Dados, treads of steps and landing on 12mm

thick cement mortar (1:3) jointed with neat cement slurry

mixed with pigment to match the shades of the tiles including

rubbing and polishing etc. complete with cost, conveyance,

royalties and taxes of all materials complete in all respects as

per direction of Engineer-in-Charge.

Ground Floor sqm 2.15 3516.52 7569.30

First Floor sqm 2.26 3539.99 8000.82

Second Floor sqm 6.12 3742.18 22902.15

22 Ceramic Toilet tiles

Supplying fitting, fixing ,ceramic glazed tiles 30cm x30 cm /

40cm x40 cm in floors of size of approved make with 20mm

thick bed of cement mortar (1:4) jointed with neat cement

slury mixed with pigment to match the shades of the tiles

complete including cost of all materials,Labour T&P etc

required for the work .

Ground Floor sqm 56.60 2595.49 146916.98

First Floor sqm 37.25 2611.08 97259.48

23 Ceramic Skirting

Supplying & Fixing ceramic tiles in Dados, Skirting and risers of

steps on 12 mm thick cement plaster (1:3) Jointed with neat

cement slury mixed with pigments to match the shade of the

tiles including rubbing and polishing including cost of all

meterials etc. complete.

Ground Floor sqm 252.16 2360.17 595148.23

Supplying and fixing-Fixing of Un-plasticised poly vinyl chloride

(UPVC) (FENESTA/NCL VEKA LTD.) Casenent Door-60-Series

duly manufactured using UPVC reinforced profiles of 60mm x

55mm x 2.5mm for outer frames 102mm x 60mm x 2.5mm

casement Door Sash profile and 74mm x 60mm x 2.5mm

mullion peofile capable of mounting single glazing system,

structurally reinforced with hot dip galvanised up to 50 microns

of minimum thickness of 2.0 mm prefabricated & welded

through fusion welding the door sash shall be fitted with 12mm

thick WPC Board of Greenply make duly fixed with EPDM

weathering seal resistant accessories like clipping locking

system made of aluminium 1 No. per set of sashes and th

esystem isto be installed at the site using anchor fasteners,

silicon rubber sealant,easy glazing/deglazing at site etc.

including cost and conveyance of all material, accessories,

labour charges, materials and product conforming to ASTM D

638-14,EN-447-95 and other applicable codes and standards.

(Ref.-Office of the Engineer-In-Chife (CIVIL), Odisha Nirman

Soudha,Bhubaneswar. Lt. No-16100)

Ground Floor Sqm 64.89 11339.33 735808.99

Second Floor Sqm 15.54 11339.33 176213.16

Terrace Floor Sqm 4.41 11339.33 50006.44

Providing of 3 track 3 panel sliding windows duly made of

Fenstech upvc Frame section 112mmX 57mm and SHUTTER

section 45mm x 57mm, solid & Inbuild gasket beading

Ground Floor sqm 36.45 4621.64 168458.60

First Floor sqm 46.58 8748.10 407442.53

Second Floor sqm 46.58 8748.10 407442.53

Terrace Floor sqm 2.03 8748.10 17714.89

Digitally signed by JAYA

No Item of Work Unit Quantity Rate Amount

26 Sliding door

Providing and fixing System Aluminum works for Sliding doors

and windows of TOSTEM make with 35mm visible aluminum

section width in the center mullion. The extruded aluminum

sections should be made from Grade 6063 & Anodized with

Texguard coating , silicon coated to suit marine atmosphere. All

profiles should be None insulated Profiles. Corner connection

will be Butt joint with Screw using Nano gaskets for sealing. All

other major Accessories should also be made by the same

manufacture. All Slider doors & windows will be center locking.

Integrated Anti-lift in slider panel, EPDM gaskets should be

used in slider windows & doors in all meeting points instead of

Brush Pile. The outer frame Depth will be 72mm. All materials

which are used should be corrosion-resistant so that they are

good functioning in different environments and that there are

no negative influences either on the aluminum or on the surface

treatment. The system should allow the application of glazing or

panels with thickness up to 8mm. The external perimeter of

aluminium sections should be Anodized with Texguard coating,

the system should qualify Airtightness 8 m3/h.m2 at 75Pa of

pressure, Water tightness 150 Pa, Wind load resistance 1200

Pa. System should have a 10-year warranty on properties,

functionality and design, within restrictions defined by technical

specifications of anodizing & 1-year warranty on wearing parts

only applies to normal and realistically foreseeable use. All

Slider doors & windows will be center locking .

Ground Floor sqm 2.52 9903.50 24956.83

First Floor sqm 2.52 9903.50 24956.83

27 WPC Door Frame

Providing & Fixinng factory made 100% Solid WPC ( Wood

Polymer Composite )- Door Frame 125 mm x 65 mm Single

Rebated, made from Wood Polymer Composite (Single Extruded

Process ) material comparising of virgin PVC polymer of K Value

57-60 ( Suspension Grade ), Calcium Carbonate and Natural

Fibers ( Wood Powder/ Rice Husk/ Wheat Husk ) and Non toxic

additives fabricated with meter Joints after applying PVC

solvent Cement & screwed with full body treaded star headed

screws having minimum frame density of 780 kg/ cbm & an ISO

9001 - 2015 Certified Company, having good screw holding

capacity ( Screw

Withdrawal strength of ( Min. 990 N ),Minimum Compressive

Strength of 58 N/mm2, Modulus of elasticity 900N/mm2 and

resistance to spread of flame of class A category with property

of being termite / borer proof , water / Moisture Proof & Fire

retardant & Fixed in position with SS Dash Fasteners / Hold

Fast of reuired dia and lenght, , all as per specifications

drawings as directed by the Engineer-In-Charge. Material test

certificate and authentication should be compulsory provided by

the manufacturing company. (Make- Rajashree, Amulya,Terra

Ground Floor rmt 54.45 1709.34 93073.36

Interior Door Hardware Each 11.00 814.20 8956.20

First Floor rmt 34.65 1709.34 59228.50

Interior Door Hardware Each 7.00 814.20 5699.40

28 WPC Door Shutter

Digitally signed by JAYA

No Item of Work Unit Quantity Rate Amount

Supplying and fixing of Powder coated 50-60 microns approved

colour of Aluminium 40mm Casement series Door Unit with

suitable aluminium extrude profiles. the system is designed to

accommodate 12mm clear Factory made single leaf Solid WPC

(Wood polymer) composite door shutter of 25mm

thickcompacted with wood grain finish structural foam panel of

29mm thickness and a density of 20kg/cu.mtr shall be used as

core material for fitting the metal fittings such as tower bolts,

aldrops, handles etc shall be provided. A structural adhesive

compatible with (EPS) foam shall be used for bending the core

material, The material and process for manufacturing the door

shutters shall conform to RV-TIFAC composites Design Centre's

standards and specifications and the door shutters Conforming

to relevant I.S.specification. The finish of door shutter will be

plain colour white/ Ivory/ Beige/ Light grey/ Mahogany/ Teak

wood or any other colour using high quality pigments. Three

heavy whight mild steel butt hinges type-I(ISI marked) size

100mm are to be fitted on one side of shutter.

Ground Floor sqm 17.33 5667.35 98186.86

First Floor sqm 11.03 5667.35 62482.55

29 UPVC VENTILATORS

Providing of Upvc Ventilator duly made of Fenstech upvc FRAME

section 100mm x 60mm & Inbuild gasket (Minium Size 3'4" X2')

Ground Floor sqm 3.00 7075.67 21227.02

First Floor sqm 3.00 7075.67 21227.02

Providing of Upvc Ventilator duly made of Fenstech upvc FRAME

section 60mm x 60mm & Inbuild gasket (Minium Size 2' X2')

Ground Floor sqm 1.80 10635.21 19143.37

First Floor sqm 0.36 10635.21 3828.67

Supplying and Fixing of M.S. Grills, M.S.Doors, M.S. Gate etc

including cost, conveyance of all materials, priming,and labour

for fitting fixing etc. complete as per the instruction of

Engineer-in-Charge

Ground Floor kg 86.40 143.97 12439.16

First Floor kg 86.40 143.97 12439.16

Terrace Floor kg 168.00 143.97 24187.26

Supplying, fitting & fixing in all floors of M.S. grills, grill gates,

M.S. gates, garage door, collapsible gates with top and bottom

rails, steel windows, critical frames for windows, stair case and

parapet railing made out of M.S Square bar/ flat including stair

case hand railing with 40mm. dia G.I.pipe etc. including

painting two coats over a coat of redoxide primer as per

approved drawing and design with cost of all materials &

labour, labour cess, T&P, sundries etc. complete in all respect

as per specification & direction of the Engineer-in-Charge.

Ground Floor kg 907.50 143.97 130654.41

Terrace Floor kg 44.55 143.97 6413.94

31 Stainless steel

Supplying, fitting and fixing of Stainless steel of 304 grade in

hand railing using 50mm dia of 2mm thick circular pipe with

Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and

stainless square pipe bracing of size 32mm x 32mm x 2mm in 3

rows in stair case as per approved design and specification,

buffing, polishing etc with cost, conveyance, taxes of all

materials, cost of all labour,labour cess, T&P etc. required for

the work complete in all respect as per direction of the

Engineer-in-charge.

Ground Floor kg 67.07 351.42 23569.46

First Floor kg 67.07 351.42 23569.46

Second Floor kg 67.07 351.42 23569.46

31 Synthetic Enamel Paint (Iron Work)

Digitally signed by JAYA

No Item of Work Unit Quantity Rate Amount

Painting two coat with approved synthetic enamel paint to new

iron work over a coat of Red oxide primer including cost,

conveyances, royalties, taxes of all materials and cost of all

labour with T&P required for the work etc. complete as per

specification & direction of Engineer in charge.

(Make-Asian/ Berger/ Dulux/ ICI or equivalent make duly

approved by Engineer-in-charge).

Ground Floor sqm 42.33 219.24 9280.60

First Floor sqm 49.94 224.79 11224.89

Second Floor sqm 46.58 230.45 10733.40

Terrace Floor sqm 6.15 236.35 1453.58

32 Synthetic Enamel Paint (Wood Work)

Painting two coat with approved synthetic enamel paint to new

wood work over a coat of Red oxide primer including cost,

conveyances, royalties, taxes of all materials and cost of all

labour with T&P required for the work etc. complete as per

specification & direction of Engineer in charge.

(Make-Asian/ Berger/ Dulux/ ICI or equivalent make duly

approved by Engineer-in-charge).

Ground Floor sqm 22.77 312.94 7125.55

First Floor sqm 97.65 320.84 31330.22

33 Antifungal Weather Coat Paint

Wall painting two coats with Antifungal weather coat paint (1st

quality) exterior grade of approved make & approved shade

over a coat of primer to make an even finished surface in all

floors and heights with all scaffolding and staging charges

including cost, conveyance, cost of all labours, T & P, sundries

etc. as required for the work complete in all respect as per the

direction of the Engineer-in-Charge.

(Make: Asian/ Berger/ Dulux/ ICI or equivalent make duly

approved by Engineer-in-Charge)

Ground Floor sqm 316.06 117.53 37145.78

First Floor sqm 313.00 119.18 37303.22

Second Floor sqm 355.76 120.95 43028.69

Terrace Floor sqm 283.69 122.84 34847.91

34 Plastic Emulsion Paint

Painting two coats with plastic emulsion paint with a approved

quality primer to make an even finished surface in all floors

and heights to wall surface of approved make and shade

including sand papering, applying putty wherever necessary &

cost of scaffolding, staging charges with cost, conveyance, cost

of all labour,labour cess, T&P etc. complete as per the direction

of the Engineer-in-charge.

(Make: Asian/ Berger/ Dulux/ ICI or equivalent make duly

approved by Engineer-in-charge)

Ground Floor sqm 2224.10 126.91 282258.31

Second Floor sqm 667.11 132.03 88078.67

Terrace Floor sqm 245.09 134.72 33018.67

35 Cement Primer

Priming one coat with wall cement primer (water bound) to

make an even finished surface in all floors and heights to wall

surface of approved make and shade including sand papering,

applying putty wherever necessary & cost of scaffolding,

staging charges with cost, conveyance, cost of all labour,labour

cess T&P etc. complete as per the direction of the Engineer-in-

(Make: Asian/ Berger/ Dulex/ ICI or equivalent make duly

approved by Engineer-in-Charge)

Ground Floor sqm 2540.15 95.93 243687.13

First Floor sqm 2291.19 98.29 225210.13

Second Floor sqm 1022.86 100.65 102955.05

Terrace Floor sqm 528.77 103.13 54533.37

Digitally signed by JAYA

No Item of Work Unit Quantity Rate Amount

Finishing plastered surfaces of walls with cement based wall

putty (Water based) of approved make (JK White/ Birla white or

equivalent make duly approved by Engineer-in-Charge) and

finishing the surface smooth and even by sand papering to

receive painting in walls, at all heights with staging wherever

necessary with cost, conveyance, cost of all labour,labourcess,

all T&P etc. required for the work complete in all respect as per

the direction of the Engineer-in-charge.

Ground Floor sqm 2540.15 99.00 251480.33

First Floor sqm 2291.19 99.00 226832.29

Second Floor sqm 1022.86 99.00 101265.28

Terrace Floor sqm 528.77 99.00 52349.54

Digitally signed by JAYA

(SCHOOL BUILDING)

Description of work Unit Qty. Rate Amount

A Circuit Cum Wiring

1 Supplying & Wiring for light point/ fan/ exhaust fan point/ call bell

point with 1.5 sqmm FRLS PVC insulated copper conductor single

core cable in surface / recessed 1.6 mm thick PVC conduit with

modular switch and earthing the point with 1.5 sqmm FRLS PVC

insulated copper conductor single core cable including providing

modular box with cover of requisite number of modules including

providing cover plates as required. (Make of Switches: Legrand/

Schneider/ Honeywell/ Panasonic/ Havells)

2 Supplying & Wiring from First light point/ fan/ exhaust fan point/

call bell point to Next light point/ fan/ exhaust fan point/ call bell

point with 1.5 sqmm FRLS PVC insulated copper conductor single

core cable in surface / recessed 1.6 mm thick PVC conduit and Each 87.00 555.78 48352.86

earthing the point with 1.5 sqmm FRLS PVC insulated copper

conductor single core cable including required Ceiling Rose and

necessary connections as required. (Make of Switches: Legrand/

Schneider/ Honeywell/ Panasonic/ Havells)

3 Supplying and fixing two module steeped type electronic fan

regulator with proper modular plate switch box including Nos 62.00 553.42 34312.04

connections etc. as required. (Make : Legrand/ Schneider/

Honeywell/ Havells)

4 Supplying & fixing one no 3pin 5/6 amps modular socket outlet and

one no 5/6 amps modular switch on existing switch board and Nos 49.00 645.46 31627.54

connections as required. (Make of Switches & socket: Legrand/

Schneider/ Honeywell/ Havells/ Panasonic)

5 Supplying & fixing suitable size GI Box with modular plate and

cover in front on surface or in recess, including providing and fixing

2nos 3pin 5/6 amps modular socket outlet and 2nos 5/6 amps Nos 97.00 914.50 88706.50

modular switch etc. as required.(Make of Switches & socket:

Legrand/ Schneider/ Honeywell/ Havells/ Panasonic)

6 Supply, installation, testing & commissioning of 6 / 16 Amp Plug

Boards consisting of a 16 Amp clip-in type modular switch with

indicator and a 6/16 Amp clip-in type modular shuttered plug socket

fixed on metallic concealed box including interconnections and Nos 15.00 807.12 12106.80

making good the damages caused complete as required and as per

direction of Engineer-in-charge.(Make of Switches & socket:

Legrand/ Schneider/ Honeywell/ Havells/ Panasonic)

7 Wiring for circuit/ submain wiring along with earth wire of following

size of FRLS heavy gauge PVC insulated copper conductor single

core cable in heavy duty PVC conduit laid in surface/ recess as 0.00

required. (Make of wire:-Finolex/ Polycab/Anchor/Havells or

equivalent make of similar specification)

b) 2X4 + 1X2.5 sqmm FRLS Cu wire Mtr 225.00 221.84 49914.00

c) 2X6 + 1X2.5 sqmm FRLS Cu wire Mtr 150.00 259.60 38940.00

d) 4X10 + 2X4 sqmm FRLS Cu wire Mtr 300.00 523.92 157176.00

B. Fan & indoor Fixtures 0.00

8 Supply and fixing of Ceiling fan hook box made out of 18 swg GI

sheet and containing 10 mm dia round ms bar projecting atleast

150mm on either side & duly bent to accommodate ceiling fan down Each 62.00 141.60 8779.20

rod bolt & having earthing arrangement as per direction of

Engineer-in-charge.

9 Supplying and Fixing of following type of light fixtures with dummy

box for surface mounted fixtures only, fans and exhaust fans with

all accessories, as required.(The colour temprature for fixtures shall 0.00

be above 4000 deg K & white in colour as per application)

a) Supplying and Fixing of recessed mounted 36Watt 2'x2' Led panel

with alluminium housing similar to (Make:Wipro (CAT No:) / or Each 15.00 5599.10 83986.50

equivalent make of Philips/ Bajaj/ Halonix/ Orient)

b) Supplying and Fixing of Batten type wall mounted 4' LED fitting

(2000 Lumen/ 20W) with polycarbonate housing similar to Each 132.00 1545.80 204045.60

(Make:Wipro (CAT No:LL20-221-XXX-65NE3) / or equivalent make

of Philips/ Bajaj/ Halonix/ Orient)

c) Supplying and Fixing of Batten type wall mounted 2' LED fitting

(1000 Lumen/ 10W) with polycarbonate housing for above mirror Each 16.00 649.00 10384.00

unit similar to (Make:Wipro (CAT No:) / or equivalent make of

Philips/ Bajaj/ Halonix/ Orient)

d) Supplying and Fixing of surface mounted 18Watt (1800 Lumen)

round Led Light similar to (Make:Wipro (CAT No:) / or equivalent Each 44.00 2466.20 108512.80

make of Philips/ Bajaj/ Halonix/ Orient)

e) Supplying and Fixing of 10 watt LED Bulb fitting with angel Holder.

(Make: Wipro/ Orient/ Anchor/ Cona/ Philips)

Digitally signed by JAYA

Description of work Unit Qty. Rate Amount

f) Supplying and Fixing of Outdoor type IP65 700 Lumen/9W LED

Bulkhead wall fitting. (Make:-Wipro ( LW07-141-XXX-57-G1)/ Each 12.00 1486.80 17841.60

Equivalent of Bajaj/ Philips/ Halonix/ Orient)

g) Supplying and Fixing of 50 Watt Outdoor LED Luminaires Street

Light (6000 lumen) connected to 32 MM Dia 800 mm GI bend pipe Each 6.00 7776.20 46657.20

fixed on Roof or column with GI Clamps & hard ware etc. as

required.(Make:Wipro ()/ Orient/ Philips/ Halonix)

h) Supplying and fixing call bell/ buzzer suitable for single phase,230

V, complete as required. (Make: Orient/ Cona/ Anchor/ Costar) Each 2.00 204.14 408.28

10 Supplying, installation, testing and commissioning of star rated

ceiling fan including wiring the down rod, earthing etc as required 0.00

(Similar to Make: Orient (Energy saver 49) or Atomberg/Usha/

Crompton/ Khaitan/ Havells/ Halonix)

11 Supplying, installation, testing and commissioning of star rated

Exhaust fan including louvres, Ceiling Rose & Electric Connection as 0.00

required. (Make- Orient(Spring air) or Atomberg/ Usha/ Crompton/

Khaitan/ Havells/ Halonix)

12 Supplying, installation, testing and commissioning of star rated

Heavy Duty Exhaust fan including louvres, Ceiling Rose & Electric 0.00

Connection as required. (Make- Orient(Spring air) or Atomberg/

Usha/ Crompton/ Khaitan/ Havells/ Halonix)

C. Distribution Board 0.00

12 Supplying and fixing following way, Three pole and Neutral,sheet

steel, MCB distribution board, 415 V, on surface/ recess, complete

with tinned copper bus bar, neutral bus bar, earth bar, din bar,

interconnections, powder painted including earthing etc. as

required. (But without MCB/ RCCB/ Isolator) (Make: Legrand/

Havells/ Crabtree or equivalent make of similar specification)

a) 4 way, Double door Each 4.00 5038.60 20154.40

b) 6 way, Double door (8+18) Each 2.00 6206.80 12413.60

13 Supplying and fixing following way, single pole and neutral,sheet

steel, MCB distribution board, 240 V, on surface/ recess, complete

with tinned copper bus bar, neutral bus bar, earth bar, din bar,

interconnections, powder painted including earthing etc. as

required. (But without MCB/ RCCB/ Isolator) (Make: Legrand/

Havells/ Crabtree or equivalent make of similar specification)

a) 12 way, Double door Each 3.00 2313.98 6941.94

14 Supplying and fixing following rating MCBs/ Isolator in the existing

MCB DB complete with connections,testing and commissioning etc. 0.00

as required (Make: Legrand/ Havells/ Crabtree or equivalent make

of similar specification )

a) 63 Amps,4P 10 KA MCB (C-Curve) Each 6.00 3499.88 20999.28

b) 32 Amps, DP 10 KA MCB (C-Curve) Each 3.00 1799.50 5398.50

c) 6 Amp to 32 Amp, 10 KA SP MCB (C-Curve) Each 114.00 378.78 43180.92

15 Supplying and fixing 63Amps 4P 415 volts RCCB 30 mA Make-

LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9 in the

existing MCB DB in the existing MCB DB complete with connections Nos 6.00 6182.02 37092.12

as per direction of Engg.-in-Charge..The MCB should be

Replacement Warranty will be 3 years.

D. Panels, MDBs, DBs. MCBs 0.00

Supply, installation, testing and commissioning of cubicle type

sectionalised, front operated top entry dust and vermin proof

M.V.Panel Boards suitable for operation at 415V, 3 phase, 4 wire,

50Hz distribution system fabricated out of 2.0 mm thick CRCA

sheet, insulated busbar with heat shrienkable PVC sleeve, base

channel, wiring with space heater, thermostat and control MCBs

shall be provided for all vertical sections of main LT Panel, all hinged

door shall be earthed through 2.5 sq mm tinned braided, the

incoming and outgoing feeders shall be accommodated in a modular

arrangement, detachable gland plates, adequate size cable alley,

Sign writing, Painting, Earthing, Numbering, Danger plate, including

PVC insulated copper FRLS wires of minimum 1.5 sq.mm & 2.5

sq.mm for CT's etc. with all accessories including interconnections,

earth bus, Surge protection Device(SPD) etc. as required.(All the

incomers of the panel must be mounting with RS 485

communication port for BMS Compartibility)

16 MAIN DISTRIBUTION PANEL 0.00

Two (2) Incomer - 200 Amp, 25 KA, FP MCCB , One(1) set of –

200/5A , 15VA , CL 1.0, CT with 3 Nos Phase indicating lamps with

control fuse/ MCB Digital Voltmeter and Ammeter with selector

switch .(with required other accesories.)

One (1) Changeover - 200Amp, Manual Changeover Switch (with

required other accesories.)

Digitally signed by JAYA

Description of work Unit Qty. Rate Amount

Busbar - 300 Amp Al busbar suitable for operation at 415 Volt, 50

Hz, 3 Phase Supply.

Three(3) - Outgoing Feeders for ( One for Lift, One Fire Pump &

One spares) each Comprising of

One (1) -63A TPN 25KA MCCB with required other accesories. 0.00

Ten (10) - Outgoing Feeders for (10 Nos PDBs & Two spare)

each Comprising of

One (1) -63A 4P 10KA MCB with required other accesories. 0.00

Eight (8) - Outgoing Feeders for (10 No PDBs & Two spare) each

One (1) -32A 2P 10KA MCB with required other accesories. 0.00

PANEL AS ABOVE (Make of switch gears: Legrand/ L&T/ Schnider/

Seimens/ Hevells or equivalent make of similar specification) Set 1.00 265500.00 265500.00

17 Lift Panels 0.00

Supply, installation, testing and commissioning of cubicle type

sectionalised, front operated top entry dust and vermin proof

M.V.Panel Boards suitable for operation at 415V, 3 phase, 4 wire,

50Hz distribution system fabricated out of 2.0 mm thick CRCA

sheet, insulated busbar with heat shrienkable PVC sleeve, base

channel, wiring with space heater, thermostat and control MCBs

shall be provided for all vertical sections of main LT Panel, all hinged

door shall be earthed through 2.5 sq mm tinned braided, the

incoming and outgoing feeders shall be accommodated in a modular

arrangement, detachable gland plates, adequate size cable alley,

Sign writing, Painting, Earthing, Numbering, Danger plate, including

PVC insulated copper FRLS wires of minimum 1.5 sq.mm & 2.5

sq.mm for CT's etc. with all accessories including interconnections,

earth bus, Surge protection Device(SPD) etc. as required.

One (1) Incomer - 63 Amp, 25 KA, MCCB with 3 Nos Phase

indicating lamps with control fuse/ MCB Digital Voltmeter and 0.00

selector switch

Busbar - 100 Amp Al busbar with SC rating of 25 KA suitable for

operation at 415 Volt, 50 Hz, 3 Phase supply

One (1) - Outgoing Feeder with 63 Amp 4P MCB for lift supply 0.00

Four (4) - Outgoing feeder with 32A,2P, 10KA MCB for ARD battery

charger,Liftwell lighting & one nos spare

18 Supplying,installation,testing & commissioning of materials and

installation of GI earth plate 600mmx600mmx6mm thick ISI

marked with G. I. nut bolts & washers including cost of burnt

wood charcoal, salt, foreign soil, water pouring arrangements, brick

masonary enclosure on top with removable RCC cover complete Set 3.00 7670.00 23010.00

with labour for excavation of pit in all kinds of soil & rock as

required and as per direction of Engineer-in-charge.The entire

earthing system should be Replacement Warranty will be 2 years

19 Providing and fixing 25mm x 5 mm GI strip on surface or in recess

for connections etc. as required as per direction of Engg.-in-Charge. Mtr 100.00 177.00 17700.00

E. Cables, Cable Laying & Termination 0.00

20 Supplying & Testing of 1.1 KV grade Aluminium XLPE power cable of

following size suitable for 415 Volt, 3Ph, 50 c/s supply.

CABLE LAYING 0.00

21 Laying of one number PVC insulated and PVC sheathed/XLPE power

cable of 1.1KV grade of following size direct in ground including 0.00

excavation (75 cm),sand cushioning,protective covering and refilling

the trench etc as required.

a) Above 35 sq. mm and upto 95 sq. Mm Mtr 150.00 398.84 59826.00

TERMINATION OF CABLES 0.00

22 Supply & Making end Termination with brass compression gland and

Cu/aluminium lugs for PVC insulated and PVC sheathed cable of 1.1 0.00

kv grade (without cost of Cable)

F. LIGHTING ARRESTER 0.00

23 Supply of 8 mm Aluminum Round Conductor.Tested as per IEC

62561. as per direction of engineer in charge.

24 Supply of Roof conductor holder for parapet- Polyamide Conductor

holder:With M8 female thread or diameter 7mm, M8 Screw to

connect the conductor holder.Weather and temperature resistant No 120.00 60.18 7221.60

from -35 to +90 degree Celsius tested. Conductor holder @ 1 meter

distance.Tested as per IEC 62561. as per direction of engineer in

Digitally signed by JAYA

Description of work Unit Qty. Rate Amount

25 Supply of Polyamide roof cable holder for flat roof: DIN 48829 Form

B1. Closed form with bottom. Filling weight 1Kg (frost-resistant No 20.00 234.82 4696.40

concrete). Sleeve from polyethylene, black @ 1 meter distance.

Tested as per IEC 62561.

26 Supply of Connector: For T cross and parallel connectors. Quick

installation using hexagonal bolt M10X30 high-grade hot dip No 12.00 239.54 2874.48

galvanised. Tested as per IEC 62561.(2nos/expansion piece ).

27 Supply of 1 mtr vertical air terminal with mounting accessories on

the flat surface to meet the requirements of IS/IEC 62305. Tested No 6.00 1373.52 8241.12

for Electrical , mechanical and chemical as per IEC 62561. Tested

for 100kA lightning current.

28 Supply for Providing of Stand for Fang Fix system 16 kg with base

and clamp ,made up of frost resistant concrete and clamp tested No 6.00 1125.72 6754.32

upto 100KA lightning current .

29 Supply of Test Joint (Folding Clamp) suitable to connect 8mm round

conductor and max by 30x3 mm GI strip as specified in drawing and No 4.00 448.40 1793.60

directed by Engineer. Tested for 100kA lightning current.

30 Supply of IP 66 Poly Propylene Junction Box. Installation at 1Mtr

Height For Test Joint .Internal dimensions: 100x100x48 mm. No 4.00 326.86 1307.44

31 Supply of Galvanised Steel Flat 30X3 mm thickness from earth

electrode directly in ground as required. Flat conductor Hot Dipped Mtr 20.00 318.60 6372.00

Galvanized. Tested as per IEC 62561.

32 Supply for Providing of Cross connector for Flat: Suitable for 30mm

Galvanised steel strip. Installed with 4 nos of hexagonal plate. No 8.00 297.36 2378.88

Tested for 100kA lightning current.

33 Supply of flat conductor holder- Fit: FL 30, With mounting hole 6.2 x

22 mm, With 2 cylinder bolts M6 x 16 and over-piece from hot-dip No 8.00 307.98 2463.84

galvanised steel, Bottom section from polyamide, black. Tested as

34 Supply for Providing of Plastic Corrosion Protection strip: Approx 1.1

mm thick. Width 50mm. Made of petrolatum- coated chemical fibre No 3.00 1037.22 3111.66

35 Supply of UL Listed maintenance free ,Low carbon copper coated

earth rod of 3 metre electrode having diameter of 17.2 mm with No 4.00 4935.94 19743.76

copper coating thickness of 250micron tested as per IEC 62561-2.

36 Supply of universal clamp made of SS to connect rod with flat

37 Supply of Earth conductivity enhancing mineral compound shall be

of 25 kg/pit tested as per IEC 62561-7,TCLP tested.

38 Supply of The above arrangements shall be provided with Heavy

duty earth champer of 5000kg load bearing capacity to ensure the No 4.00 2559.42 10237.68

safety of earthing system.

39 Installation of The above arrangements including all accessories as

per Direction of Engg. In charge.

FIRE EXTINGUISHER 0.00

Note : [1] All Fire Extinguisher shall be HCFC, CFC and Halons free.

[2] The Fire Extinguisher Manufacturer/Supplier shall provide 0.00

declaration, Technical Data Sheet/cutsheet of All type of Fire

extinguisher to be installed.

1 Providing and fixing Carbon-di-oxide fire extinguishers consisting of

welded M.S cylindrical body,squeeze lever discharge valve fitted

with internal discharge tube, ISI marked high pressure discharge

hose, discharge nozzle, suspension bracket, confirming to IS : 0.00

15683 finished externally with red enamel paint and fixed to wall

with brackets with rawl plug/dash fasteners complete with internal

charge with CO2 gas conforming to IS : 307-1996..

2 Providing and fixing ABC stored pressure dry chemical powder

(mono ammonium phosphate) Fire Extinguisher IS : 15683 latest

revision manufacturer and of CRCA sheet in welded construction,

finish with High quality epoxy polyster powder coated complete with 0.00

brass forged ball valve, gun metal cap and nozzle, including initial

filled and wall suspension bracket (suitable for fighting in class 'A', B

& 'C' that is wood, textile, flammable liquid, electric and gases).

DATA NETWORK 0.00

1 Supply & Laying of Cat6 23Awg UTP Cable, through existing conduit,

Make: Legrand/ Systimax/ Panduit

2 Supply & fixing of RJ-45Jack of Category 6 with Single-port British-

style Face plate 86x86 mm with Curveture and wall mount box Nos 87.00 645.46 56155.02

Make: Legrand/ Systimax/ Panduit

3 Supply & fixing of Cat6 24 Port Loaded Patch Panel:Make: Legrand/

Systimax/ Panduit

4 Supply & Installation of Cat6 Factory crimpped moulded patch

cord,1mtr, Make: Legrand/ Systimax/ Panduit

Digitally signed by JAYA

Description of work Unit Qty. Rate Amount

5 Supply & Installation of Cat6 Factory crimpped moulded patch cord,

2mtr. Make: Legrand/ Systimax/ Panduit

6 Supply,Installation,Testing & Commissioning of L-2 Managed

Switch with minimum 24 X 10/100 Base-T ports and additional 4

nos. SFP upl ink ports , Switch should have mia 56 Gbps Switching

Fabric and I6K MAC Address, Support 1Pv6 Management , support

LEEE 802.17/equivalent for sub 50ms ring protection, lGMP and Nos 4.00 36226.00 144904.00

MLD snooping, Operating temperature 0 to 50 degree C, Shou ld

support CLl, GUl, USB or equivalent interface for talcing backu p,

UDLD and single LP management of min 24 switches. Make:

Cisco/HP/Netgear/Digisol

7 Supply,Installation,Testing & Commissioning of 12U/500D Wall

Mount Rack with Accessories: The rack size should be 600W x

500D, Front frame integrated with top, bottom, front and two side

panels for better rigidity and strength, Front Glass Door with Lock

loaded, Compliance with standards shall be UL 2416., DIN 41494,

including Power Distribution Unit (06/16 Amp Indian-Standard - 06

Socket - Single Pole / Screw Mountable / 16 Amp MCB / Alternating

Current - 16 Amp 3 Pin Plug with Power Cable 2.5 sq.mm 3 meter

Lengt), 1 cooling Fan(230V AC - 90 CFM, dB 42), 2nos 1U Metal

Cable manager with Plastic cable loops and H/W screw.

8 Supplying and fixing of following sizes of medium class PVC FRLS

conduit ISI marked along with accessories in surface/recess

including cutting the wall and making good the same in case of 0.00

recessed conduit as required as per direction of Engg.-in-Charge.

Make- AKG/ BEC/ Precision/ Norpak

EPBX SYSTEM 0.00

1 Supplying and fixing of Hybrid EPABX system equipped with 64

Analog extensions and 4 Analog Trunk, including required hardware Set 1.00 29500.00 29500.00

and software etc as reqd.

2 Supply & Installation of RJ-11 Information Outlet Set for analoge

Telephone connection.

3 Supplying desktop telephone sets with colour ID as reqd. Nos 10.00 2183.00 21830.00

4 S/f of 20 pair MDF box with 2 nos. krone module. Nos 1.00 1918.68 1918.68

5 S/f of 10 pair MDF box with 1 nos. krone module. Nos 2.00 1257.88 2515.76

6 Supplying and drawing following pair 0.5 sq mm FR PVC insulated

annealed copper conductor, unarmored telephone cable in the 0.00

surface/ recessed steel/ PVC conduit as required.

Digitally signed by JAYA

(SCHOOL BUILDING)

Sl No Description Unit Qty Rate Amount

1 A-Internal Sanitary & Plumbing System

Supplying all materials , labour, T&P and providing and fixing

to wall or ceiling and floor PVC pipes conforming to C-

PVC1785/89 ( Sch-80 ) and G.I pipe fittings of the following

nominal bore with clamps including making good the

wall,ceiling and floor ,testing all complete as per P.H.

specification and direction of Engineer-in-charge .

In Ground Floor-

(a) 20mm dia C-PVC Pipe Mtr 65.00 338.12 21978.00

(b) 25mm dia C-PVC Pipe Mtr 50.00 377.03 18851.39

(c) 32mm dia C-PVC Pipe Mtr 40.00 661.63 26465.04

(d) 40mm dia C-PVC Pipe Mtr 25.00 893.81 22345.37

2 Supplying all materials, labour, T&P and fitting and fixing U-

PVC SWR soil waste ventilating pipes and fittings of the

following outside diameter conforming to ISI No. 13592/1992

to walls with nails, bobbins and wooden plugs or laying in

trenches including jointing with supply of approved rubber

lubricant by non-heat application method/as per 0.00

manufacturer ’ s specification, testing, earthwork in excavation

in all kinds of soil and refilling of trenches as per specification

and direction of the Engineer in charge. (Supreme, Astral,

(b) 75mm PVC plain bend Each 30.00 217.12 6513.60

(c) 75mm PVC socket plain Each 30.00 95.93 2878.02

(f) 110mm PVC socket plain Each 40.00 188.92 7556.72

(g) 110mm PVC plain bend Each 30.00 273.76 8212.80

(h) 110mm PVC door bend Each 10.00 346.45 3464.48

(i) 110mm PVC door Tee Each 8.00 455.48 3643.84

(j) 110mm PVC plain Tee Each 30.00 380.79 11423.58

(k) 110mm PVC door cross Tee Each 6.00 650.42 3902.50

(l) 110mm dia U-PVC Offset without ear Each 6.00 480.73 2884.39

(m) 110mm PVC vent cowl Each 13.00 68.68 892.79

(n) 110mm PVC Clamp Each 30.00 50.50 1515.12

3 Supply,Providing, fixing, testing and commissioning in position

UV stabilised 75 mm dia UPVC Rain water pipe with Fittings

(IS: 13592 Type-B). In case of ceiling hanging, the supply of Mtr 50.00 419.16 20957.98

Pipe Clamps (Chilly/ MS angle) as per engineer in charge.110

mm diameter. (IS:13592,Type -B).

4 Supply,Providing and fixing 150 mm x 150 mm.dia CI Grating

for Rain water pipes 110 mm dia.

5 Supplying all materials , labour, T&P and fixing Vitreous china

water closet ,squatting pan ( Indian type W.C. pan / Orissa

pattern squatting pan ) duly embedded in cement concrete

1:5:10 using hard granite metal 4cm nominal size including

fixing a pair of vitreous china 250mmx 130mmx 30mm foot

rest, fixing 100mm dia hci 'P' or 'S' trap for water closet Each 14.00 3042.87 42600.12

squatting pan including jointing the trap with pan in cement

mortar (1:1), cutting the floor and mending good the

damages etc. all complete as per P.H. specification and

direction of Engineer-in-charge .

580mmx440mm size Orissa Pan (White)

6 Supplying all materials,labour,T&P and fitting and fixing

vitrous Chaina washed down water Closet (European type

water closet - EWC) with integral "P" or "S" type trap to the

floor including wodden plug and chromoum plated screw

including jointing the trap with soil pipe in CM(1:1) fixing Each 4.00 3289.84 13159.36

plastic seat cover for washed down water closet with crmium

plated brass hinges and rubber buffers including polishing etc

all complete as per specification and direction of Engineer-in-

European Water Clost "S" or "P" trap

7 Matrix Set -1 (WB 65 x 35 with one pair mounting brackets,

EWC & Cistern complete with fittings & seat cover, one no Each 2.00 78575.49 157150.98

hinged rail 76 cm and five nos of grab rails 60 cm)

Digitally signed by JAYA

Sl No Description Unit Qty Rate Amount

8 Supplying all materials, labour, T&P and fitting and fixing 10

litres capacity low level flushing cistern with a pair of cast iron

or M.S brackets complete with fittings such as siphonic

arrangements 15mm nominal size brass/pvc ball valve with

polythene float CP brass handle, unions and couplings for

connection with inlet, outlet and overflow pipes,32mm dia CP

flush bend,15mm dia pvc inlet connection pipe including

cutting holes and making good the same and connecting the

flush bend with cistern and closet and connecting the inlet

pipe with supply main etc all complete as per specification and

direction of the Engineer in charge.

10 litres PVC L.L. Cistern (Slimline-white)

9 32mm dia flush bend for L/L cistern Each 18.00 81.77 1471.93

10 Supplying all materials,labour,T&P and Bowl pattern urinal of

the following sizes including connecting the urinal with 32mm

dia PVC waste pipe 910mm long by means of white lead mixed

with chopped hemp, fixing 32mm dia cp dome west,15mm dia 0.00

cp spreader including cutting holes in wall and making good

the damages with supply of wooden plugs,screws and cement

etc. all complete as per specification and direction of the

Engineer-in-charge.

(a) Halfstall urinal(Parryware). Each 6.00 2678.60 16071.60

(b) 32mm dia CP dome waste Each 6.00 159.22 955.30

(c) Pressmatic Stopcock Each 6.00 2099.22 12595.32

11 Supplying all materials ,labour ,T&P and fixing Wash basin

with hole for pillar taps with cast iron or MS brackets painted

white including cutting holes in walls and making good the

damages with supply of wooden plugs, screws and cement

etc. fixing pedestral for wash basin recessed at the back for

the reception of pipes and fittings, fixing PVC waste pipe of

32mm nominal diameter for wash basin including brass check

nut complete, fixing pillar taps capstan head screw down high

pressure lettered 'Hot' and 'Cold' with long screws, shanks and

back nuts of 15mm dia nominal bore, fixing15mm dia PVC

inlet connection pipe and making connection with pillar cocks

and supply mains for wash basin , fixing 12mm dia CP brass

waste etc.all complete as per specification and direction of

Engineer-in-charge.

(a) 550mmx400mm size wash hand basin with Porcelain pedestal

(Parryware/Hindware/Somay/Cera) Each 4.00 4843.90 19375.60

(b) Under Counter basin (560x450) (Hindware) Each 10.00 3319.34 33193.40

(c) 32mm dia PVC waste pipe with brass coupling nut Each 14.00 62.58 876.06

(d) 15mm dia PVC inlet connection pipe 0.45m long Each 14.00 42.13 589.76

12 Supplying all materials, labour, T&P and fixing wash Kitchen

sink/ Laboratory sink with outlet at end and weir overflow

including fitting and fixing a pair of cast iron or MS brackets

painted white, fixing 50mm/40mm dia ss waste, fixing

50mm/40mm dia PVC waste pipe 910mm long with supply of 0.00

wooden plugs, screws and cement etc including cutting holes

in walls and making good the damages etc all complete as per

specification and direction of the Engineer in charge.

(a) 600x450x250 mm stainless steel kitchen sink (Jayna make)

13 Supplying all materials, labour, T&P and fitting and fixing

brass/CP fittings of the following nominal bore with supply of 0.00

all jointing materials complete as per specification and

direction of the Engineer in charge.

(a) 15mm dia CP 2way bib cock (Euronics RIV-1004R) Each 4.00 1085.60 4342.40

(b) 15mm dia CP Health faucet with Hose Pipe (Euronics EHF01) Each 4.00 895.62 3582.48

(c) 15mm dia CP Short Body Bib cock (Euronics RIV-1010R) Each 14.00 824.82 11547.48

(d) 15mm dia CP Long Body Bib cock (Euronics RIV-1011R) Each 4.00 919.22 3676.88

(e) 15mm dia CP Angle stop cock with wall Flange (Euronics RIV-

(f) Sink Cock (Wall Mounted) with wall Flange(Euronics RIV-

(g) 15mm dia CP Pillar cock (Euronics RIV-1002R) Each 14.00 1096.22 15347.08

Digitally signed by JAYA

Sl No Description Unit Qty Rate Amount

(h) 15mm dia CP extension piece Each 20.00 69.97 1399.48

(i) PVC Connection Pipe Each 36.00 40.12 1444.32

(j) PVC Discharge Pipe Each 21.00 92.75 1947.71

(k) 15mm dia. C.P flange Each 50.00 47.55 2377.70

(l) 125mm dia CP gratting Each 30.00 110.33 3309.90

14 Supplying all materials ,labour ,T&P and fixing standard sized

CP brass towel rail / Towel ring complete with CP brass

brackets fixed to wooden plugs with chromium plated brass Each 8.00 636.48 5091.84

screws etc.all complete as per specification and direction of

Engineer-in-charge .

15 Supplying all materials ,labour ,T&P and fixing CP Soap

Holder/ Soap Dispenser complete with CP brass brackets

fixed to wooden plugs with chromium plated brass screws Each 10.00 2713.54 27135.40

etc.all complete as per specification and direction of Engineer-

CP Soap Dispenser

16 Supplying all materials, labour, T&P and fixing of Stainless

Steel Coat Hook alongwith all necessary accessories complete

including cutting, making good the walls, floors, slab wherever Each 18.00 342.20 6159.60

complete in all respect as per specification and direction of the

Engineer in charge.

Stainless Steel Coat Hook - Double (Euronics EC02)

17 Supplying all materials ,labour ,T&P and fixing Mirror of

superior glass mounted on 6mm thick A.C. sheet or ply wood

sheet and fixed to wooden plugs with chromium plated brass Each 14.00 939.16 13148.27

screws and washers etc.all complete as per specification and

direction of Engineer-in-charge.

Mirror (Bevelled edge) 600mmx450mm

Digitally signed by JAYA

Sl No Description Unit Qty Rate Amount

18 Supplying all materials, labour, T&P and fitting and fixing G.M/

Brass fittings of the following nominal bore with supply of all

jointing materials complete as per specification and direction Each 6.00 1168.51 7011.04

of the Engineer in charge.

25mm dia Brass F.W valve (Sakti make)

19 32mm dia Brass F.W valve (Sakti make) Each 4.00 1711.44 6845.75

20 40mm dia Brass F.W valve (Sakti make) Each 2.00 2165.41 4330.81

21 40mm dia CPVC Ball valve Each 6.00 1116.34 6698.03

Supplying all materials, labour, T&P and providing fitting and

fixing Aquaguard PRO Thermapure 120 PSS RO ACH which

gives you Hot,Cold & Ambient purified water.Aquaguard PEO

Thermapure 120 PSS RO has built-in-3 stage

combinations,Tank Capacity 120Ltr.,Cold Water-80 Ltrs,Hot

water-20 Ltrs.,Ambient water-2- Ltrs.,Cooling capacity-60

LPH,Refrigerant-HFC R134a,Cold water temperature-15

Deg.C+/-1*,Heating coil wattage-2000W,Hot water

temperature-50 Deg C+/-1,Thermal insulation-PUF,No of

Faucets-1 Hot,1 Cold,1 Ambient,Tank,front panel and drain

tray MOC-SS304,Other body panels-Powder coated CRCA

Steel,No of filtration stages-7,RO Capacity-50

LPH*,RORecovery%-50%*,TDS Reject-90%*, Dimentions

(WxDxH)cm-75x72x144,Net weight-92 Kg.etc.all complete as

per direction of the Engineer-in-charge.

23 Supplying all materials,labour,T&P and fixing Rotational

moulded polyethylene cylindrical vertical water storage tanks

conforming to IS : 12701--1996 including cutting holes

through the tank and fixing mild steel tubes and fittings and

providing extra sockets and jam nuts, fixing ball valve etc,

including hoisting upto a height of 5 metres above ground

level and placing the tank to the required position and

providing 1st class K.B brickwork in cement mortar (1:6) of

0.46m height in staging and in circular protection wall to

support the tank, 12mm thick cement plaster (1:6) over

brickwork, R.C.C slab of size 1.60mx1.60m and 0.10m thick,

R.C.C beam of 0.25mx0.30m and 2.60m average length in

cement concrete(1:2:4) using 12mm size h.g chips including

centering and shuttering, watering, curing, conveyance of all

materials to worksite etc all complete as per specification and

direction of the Engineer in charge.

Fixing 2000Ltr Roto-moulded water storage tanks-In

24 B- External Supply & Drainage portion

Supplying all materials ,labour ,T&P and constructing gully

trap chamber of inside size 250mmx250mm with 8cm thick

RCC precast cover slab in cement concrete (1:2:4) mix using

12mm size crusher broken HG chips, foundation concrete

(1:4:8) using 40mm size crusher broken HG metal on bed and

around trap, KB brick work in cement mortar (1:6) in Each 4.00 2185.60 8742.38

foundation and plinth and inside 12mm thick cement

plastering (1:3) finished with a floating coat of neat cement

including fixing 100mmx100mm size HCI gully trap,

150mmX150mm size CI grating etc.all complete as per

drawing, specification and direction of Engineer-in-charge.

In side size 250mmx250mm

Digitally signed by JAYA

Sl No Description Unit Qty Rate Amount

25 Supplying all materials ,labour ,T&P and constructing

Inspection Chamber of inside size 760mmx760mmx460mm

with cement concrete (1:3:6) using 40mm size crusher broken

hard black granite metal on bed , KB brick work in cement

mortar (1:6) in foundation and plinth, moulding and shaping

the channel inside and benching with cement concrete (1:2:4)

using 12mm size crusher broken hard black granite chips,

12mm thick cement plaster (1:3) with cement punning to

inside, cement flush pointing (1:3) to outside, R.C.C cover

slab (1:2:4) using 12mm size crusher broken hard black

granite chips with R.C.C man hole cover, earth work in

excavation in all kinds of soil and refilling the cavity around

the chamber including watering,curing,cost of all materials,

conveyance of all materials to worksite, payment of royalty,all

taxes etc.all complete as per approved drawing, P.H

specification and direction of Engineer-in-charge .

Inside size : 760mmx760mmx460mm

26 Supplying all materials, labour, T&P and constructing Circular

Type Man Hole Chamber of the following size with cement

concrete (1:4:8) using 40mm size hard granite metal on bed,

1st class Fly ash brickwork in cement mortar (1:5), moulding

and shaping the channel inside and benching with cement

concrete (1:2:4) using 12mm size h.g chips, 12mmthick

cement plaster (1:3) with punning to inside, 12mm thick

cement plaster (1:3) to outside, R.C.C cover slab in (1:2:4)

using 12mm size h.g chips, earthwork in excavation in all

kinds of soil and refilling the cavity around the chamber

including watering, curing, conveyance of all materials to

worksite, payment of royalty,taxes etc all complete as per

approved specification and direction of the Engineer in charge.

Inside size : 910mmx910mmx910mm

27 Providing and fixing in position Polyproplene Foot steps of

required shape and approved quality as per the direction of each 3.00 273.76 821.28

28 Providing Lowering, Laying, Jointing and Testing Work of non-

pressure NP 3 class R.C.C. pipes with collars jointed with stiff Mtr. 45.00 532.42 23958.72

mixture of cement mortar in the proportion of 1:2 (1 cement :

2 fine sand) including testing of joints:

A Construction of 30KLD Ltrs.Capacity Domestic UGR. 0.00

1 Earth work in excavation of foundation in all kinds of soil

within 50m initial lead and 1.5m initial lift including rough

dressing & breaking clods to maximum 5cm to 7cm and 0.00

laying in layers not exceeding 0.30m in depth and as per

direction of the Engineer-in-Charge.

2 Excavation of foundation in laterite rock or any hard rock

(other than granite) including dressing and leveling the bed 0.00

and depositing the soil as per specification approved by the

3 Supplying all materials, labour, T&P and filling in foundaton

and plinth with sand well watered and rammed including

conveyeance of all materials to worksite,payment of royalty, 0.00

taxes etc all complete as per direction of the Engineer in

4 Supplying all materials, labour, T&P and providing cement

concrete (1:3:6) with 40mm H.G metal including watering, 0.00

curing and conveyance of all materials to site.

5 Supplying all materials, labour,T&P and providing cement

concrete (1:1.5:3) for RCC work using 12mm HG chips 0.00

including hoisting,laying,curring and conveyance of all

materials to site etc complete.

a. R.C.C floor , walls and roof slabs Cum 14.93 8899.44 132900.71

Digitally signed by JAYA

Sl No Description Unit Qty Rate Amount

6 Supplying all materials, labour, T&P and providing

M.S.Reinforcement for RCC work including cutting, banding,

binding, straightening and trying the grills and placing in 0.00

position including cost of binding wire 18 to 20 gage.

7 Supplying all materials, labour, T&P and providing rigid and

smooth centering and shuttering for RCC work including false 0.00

work and dismantling then after casting including cost of

materials complete in ground floor.

8 Supplying all materials, labour, T&P and providing 6mm thick

cement plaster (1:3) including watering,curring and 0.00

conveyance of all materials to site.

Inside/outside portion sqm. 105.84 191.04 20219.89

9 Supplying all materials, labour, T&P and providing cement

punning including watering, curring and conveyance of all sqm. 47.00 39.06 1835.73

materials to site.

10 Supplying all materials, labour, T&P and futting and fixing

20mm dia MS/CI step iron including supply of necessary each 8.00 321.55 2572.40

C.C(1:2:4) for fixing etc complete as per P.H.D. specification.

B Construction of 6.75mx3.60m x 1.40m(h) Rain water

Recharge Pit- 1Nos.

1 Sinking of tube well through D.T.H.Rig. 0.00

2 Lowering of PVC casing pipe inside bore. 0.00

3 Cost.of 200mm dia (Sch.80)Pipe Mtr. 50.00 1927.88 96395.00

4 Cutting slot in casing pipe for recharge of rain water Mtr. 50.00 417.13 20857.00

5 Labour for packing gravel outside the tube well 0.00

6 Cost of washed gravel. Cum 4.70 1902.63 8943.00

7 Earth work in all kinds of soil within 50 mtr initial lead and

1.5mtr initial lift including rough dressing and breaking clods

to maximum 5cm to 7cm and laying in layers not exceeding Cum 133.38 171.57 22885.00

0.3 mtr in depth and as per direction of the Engineer in

8 Supplying all materials, labour, T&P and providing cement

concrete (1:4:8) with 4cm size hard granite metal including

watering, curing, conveyance of all materials to worksite, Cum 2.16 4914.46 10638.00

payment of royalty, taxes etc all complete as per specification

and direction of the Engineer in charge.

9 Supplying all materials, labour, T&P and providing brick work

with Fly ash bricks having crushing strength not less than

75kg/cm ² with dimensional tolerance ± 8 percent in cement

mortar (1:6) including watering, curing, conveyance of all Cum 22.80 4493.56 102454.00

materials to worksite, payment of royalty, taxes etc all

complete as per specification and direction of the Engineer in

10 Supplying all materials, labour, T&P and providing 12mm thick

cement plaster (1:4) on brickwork including watering, curing,

conveyance of all materials to worksite, payment of royalty, Sqm 182.40 133.69 24386.00

taxes etc all complete as per specification and direction of the

Engineer in charge.

11 Supplying all materials, labour, T&P and providing cement

punning including watering, curing, conveyance of all

materials to worksite, payment of royalty, taxes etc all Sqm 97.20 27.26 2650.00

complete as per specification and direction of the Engineer in

12 Supplying all materials, labour, T&P and providing rigid and

smooth centering and shuttering for R.C.C works including

false work and dismantling them after casting including Sqm 6.26 398.13 2493.00

conveyance of all materials to worksite, payment of royalty,

taxes etc all complete as per specification and direction of the

Engineer in charge.

Digitally signed by JAYA

Sl No Description Unit Qty Rate Amount

13 Supplying all materials, labour, T&P and providing reinforced

cement concrete work of M-25 grade with 20mm and down

grade black hard granite crusher broken stone chips including

hoisting, laying, watering, curing, conveyance of all materials Cum 0.84 6299.78 5292.00

to worksite, payment of royalty, taxes etc all complete as per

specification and direction of the Engineer in charge.

14 Supplying all materials, labour, T&P and providing M.S

reinforcement for R.C.C work including cutting, bending,

binding, and tying the grills and placing in position including

cost of binding wire 18 to 20 gauge, conveyance of all Qntl. 0.68 6117.95 4161.00

materials to worksite, payment of royalty, taxes etc all

complete as per specification and direction of the Engineer in

15 Providing and filling filter media 0.00

b 20mm size washed gravel-2x6.0x2.50x0.40=12.00 Cum 12.00 2033.73 24405.00

16 Providing fitting and fixing M.S.grill,Jalli cover over the

C Sinking of 200mm x 150mm Large Tube well through

DTH method - 2Nos

1 Labour for drilling a perfectly vertical bore hole of specified dia

for a specified depth below ground level through consolidated

and unconsolidated rock with down the hole hammer drilling

rig or combination rig as required to suit the site condition as

per the direction of the Engineer in charge including use of

own rig with its accessories, tools and plant and consumables

etc for lowering of 200mm/150mm dia G.I/P.V.C/M.S casing

pipes for housing fitted with socket and with or without well

screen as per the necessity for soft, medium, hard and

boulder formation(G.I/P.V.C/M.S casing pipes if required to

prevent collapse of overburden is to be provided by the

contractor including lowering and withdrawing after completion

of the tube well), 200mm dia to 400mm dia in overburden

portion including packing of gravel supplied by the contractor

for 400mm dia bore only .

Drilling of 200mm dia bore 0 to 30 mtr (2x30mtr)

2 Drilling of 200mm dia bore 31 to 45 mtr (2x15mtr) mtr 30.00 923.47 27704.04

3 Drilling of 150mm dia bore 45 to 100 mtr (2x55mtr) mtr 110.00 923.47 101581.48

4 Labour for lowering the following size of PVC casing pipes with

or without slotted pipes as per necessity from ground level

upto 300 mtrs depth and fitted and set up in perfectly vertical

position including cutting and threading of blank pipes and

slotted pipes and supplyinging and fixing of all jointing

materials ,extra sockets and T&P etc. all complete and keeping mtr 60.00 212.99 12779.40

the top of casing pipe threaded including plugging the tubewell

to prevent entry of foreign materials.

Lowering of 200mm dia PVC casing pipes 0 mtr to 30 mtrs

5 Lowering of 200mm dia PVC casing pipes 31 mtr to 45 mtrs mtr 30.00 212.99 6389.70

6 Cost of 200mm dia PVC schedule - 80 pipe (2x46mtr) mtr 92.00 2095.21 192759.14

7 Cleaning and developing the tube well with supply of

compressor worked till clear and adequate discharge is

obtained from the tube well including supply and use of all each 2.00 7771.48 15542.96

necessary equipment and labour as per direction of the

Engineer in charge .

8 Supplying all materials, labour, tools and plant and

withdrawing casing pipes from the unsuccessful bore and

depositing in the departmental store in good condition. mtr 45.00 419.49 18877.05

Labour for withdrawing of 200 mm dia PVC/GI Casing Pipe

Digitally signed by JAYA

Sl No Description Unit Qty Rate Amount

9 Supplying all materials,labour,T&P and providing around

sealing by cement concrete grouting of annualr space around

GI/PVC housing pipe upto 5 mtr below ground level ( as per

drawing ) to plug the bore hole excluding cost of cement all

complete as per direction of the Engineer-in-charge .

Mimimum one meter of casing pipe to nserted in the bore in to cum 0.40 9391.62 3756.65

the rock the bottom to ensure sanitary sealing ( excluding cost

of cement which willbe supplied by the Department ) .

CC(1:2:4) with 12mm chips for grouting up to 5 mtr Depth in

10 Supplying all materials, labour, T&P and providing fitting &

fixing submerssible pump with squirrel cage induction type

submerssible electric motor to run single-phase line voltage

ranging from320 to450 volt confirm to IS 8034/89 with

following specification suitable control pannel jointing with

GI/PVC/HDPE pipe, electrification, testing, commissioning , each 3.00 19618.21 58854.62

trial running, conveyance of all material to work site,

payment of all taxces etc all complete as per PH specification

and direction of Engineer-in-charge.

2H.P three phase 3 stage head range 30 to 54 metres,

discharge 155 to 110 L.P.M with outlet dia of 32mm

11 DOL contol pannel each 3.00 4490.49 13471.47

12 2.50 sqmm flate cable mtr 250.00 151.16 37789.50

13 40mm dia steel short piece each 6.00 238.36 1430.16

14 Steel rope with cover mtr 100.00 31.51 3150.60

16 50mm size CI bracket each 6.00 107.73 646.40

17 20mm dia rigid U-PVC pipe mtr 160.00 8.14 1302.72

18 Supplying all materials, labour, T & P and providing &

electrification to submerssible pump sets ane service each 2.00 1770.00 3540.00

connection including fitting fixing of electric board & Switch etc

all complete as per direction of Engineer-in-charge.

Supplying all materials , labour, T&P and providing and fixing

to wall or ceiling and floor PVC pipes conforming to ASTM-D-

1785/89 ( Sch-80 ) and G.I pipe fittings of the following

nominal bore with clamps including making good the mtr 100.00 575.72 57572.20

wall,ceiling and floor ,testing all complete as per P.H.

specification and direction of Engineer-in-charge .

In ground floor

40mm dia UPVC ASTM-D Pipes

20 Supplying all materials, labour, T&P and constructing Bore

well protection chamber of the inside size 650x650x1000hight

with cement concrete (1:3:6) using 40mm size hard granite

metal on foundation, 1st class Fly ash brickwork in cement

mortar (1:3), with base cement concrete (1:2:4) using 12mm

size h.g chips,12mmthick cement plaster (1:4) inside and

outside, R.C.C cover slab in (1:1.5:3) using 12mm size h.g each 2.00 15731.64 31463.28

chips, earthwork in excavation in all kinds of soil and refilling

the cavity around the chamber including watering, curing,

conveyance of all materials to worksite, payment of royalty,

taxes etc all complete as per approved specification and

direction of the Engineer in charge.

Bore well chamber

D Construction of 30KLD RCC Septic tank & Soakway Pit 0.00

21 Earth work in excavation of foundation in all kinds of soil

within 50m initial lead and 1.5m initial lift including rough

dressing & breaking clods to maximum 5cm to 7cm and cum 59.40 344.21 20445.84

laying in layers not exceeding 0.3m in depth and as per

direction of the Engineer-in-Charge.

22 - do - with addl. Depth of 1.5 m

Digitally signed by JAYA

Sl No Description Unit Qty Rate Amount

23 Supplying all materials,labour ,T&P and filling in foundation

and plinth with sand well watered and rammed including cost,

conveyance of all materials to work site ,payment of cum 5.94 1194.99 7098.22

royalty,taxes etc. all complete as per direction of the

Engineer-in -charge.

In ground floor- 1x9.90mx4x0.15m=

24 Supplying all materials, labour, T&P and providing cement

concrete ( 1:4:8 ) with 4cm size crusher broken hard granite

metal including watering, curing, cost of all

materials,conveyance of all materials to work site with cum 5.94 7051.80 41887.68

payment of royalty, all taxes etc all complete as per P.W.D

specification and direction of Engineer-in-charge.

In ground floor- 1x9.90mx4x0.15m=

25 Supplying all materials, labour, T&P and providing cement

concrete ( 1:2:4 ) with 12mm size crusher broken hard black

granite chips including watering, curing,cost of all materials,

conveyance of all materials to work site with payment of cum 3.47 9391.62 32598.31

royalty, all taxes etc all complete as per P.W.D specification

and direction of Engineer-in-charge.

In ground floor- 1x8.90mx3x0.13m=

26 Supplying all materials, labour, T&P and providing cement

concrete (1:1:5:3) with 12mm size hard broken granite chips

for R.C.C works including hoisting, laying, watering, curing,

conveyance of all materials to worksite, payment of royalty, cum 27.87 10255.50 285820.73

taxes etc all complete as per specification and direction of the

Engineer in charge.

27 Supplying all materials, labour, T&P and providing rigid and

smooth centering and shuttering for R.C.C works including

false work and dismantling them after casting including

conveyance of all materials to worksite, payment of royalty, sqm 37.15 889.25 33035.56

taxes etc all complete as per specification and direction of the

Engineer in charge.

A. For Roof slab

28 Supplying all materials, labour, T&P and providing M.S

reinforcement for R.C.C work including cutting, bending,

binding, and tying the grills and placing in position including

cost of binding wire 18 to 20 gauge, conveyance of all Qntl 22.30 10351.79 230844.83

materials to worksite, payment of royalty, taxes etc all

complete as per specification and direction of the Engineer in

In ground floor

29 Supplying all materials,labour,T&P and providing 6mm CP

(1:4) with cement punning on brick work including

watering,curing,cost of all materials, conveyance of all

materials to worksite,payment of royalty,all taxes etc.all sqm 83.82 297.95 24974.17

complete as per PWD specification and direction of the

Engineer-in-charge.

30 Supplying all materials, labour, T&P and providing,fitting and

fixing 100mm x 100mm x 100mm SW Tee in wall including

filling the recess with cement concrete (1:3:6) with 12mm size

h.g chips all complete including watering, curing, conveyance Each 2.00 542.09 1084.18

of all materials to worksite, payment of royalty all complete as

per specification and direction of the Engineer in charge

31 Supplying all materials, labour, T&P and making MS step iron

in 20mm diameter MS steel bars and fixing into walls of man

hole/septic tank duly embedded in cement concrete (1:3:6) Each 10.00 335.59 3355.92

complete as per specification and direction of the Engineer in

32 Filling in foundation and plinth with excavated materials,

moorum including watering and ramming as directed by the cum 10.00 191.28 1912.78

Engineer in charge.

Digitally signed by JAYA

Sl No Description Unit Qty Rate Amount

33 Supplying all materials, labour, T&P and constructing soakway

pit of the following size with dry brick walling from bottom

upto invert of inlet pipe and fly ash brickwork in cement

mortar (1:6) for the remaining height at top, cement concrete

(1:4:8) using 40mm size hg chips on bed, 12mm thick cement

plaster (1:4) inside and outside over masonry brickwork,

gravel backing in the rear of well steining, RCC cover slab in

cement concrete (1:2:4) using 12mm size hg chips fitted with Each 1.00 30259.45 30259.45

iron lifting handles including earthwork in open well excavation

in all kinds of soil and refilling of cavity around the pit &

painting the iron works, watering, curing, conveyance of all

materials to worksite, payment of royalty, taxes etc all

complete as per approved specification and direction of the

Engineer in charge 1.40m dia x 2.00m deep soakway pit .

Digitally signed by JAYA

(100 BEDED GIRL'S HOSTEL)

No Item of Work Unit Quantity Rate Amount

1 Site Clearance

Cleaning & grubbing road land including uprooting rankvegetation,

grass ,bushes, shurbes, sapling and trees girth upto 300mm, removal

of stumps of trees cut earier and disposal of unsevicable materials and sqm 760.06 9.74 7399.18

stacking of servicable materials to be used or auctioned up to lead of

1000 meters including removal and disposal of top organic soil not

exceeding 150mm thickness.

2 Earthwork Excavation

Earth work in excavation of foundation in HARD soil within 50m lead

a) and 1.5m lift including rough dressing and breaking clods to maximum Cum 267.21 319.66 85418.23

5cm. To 7cm. And laying in layers not exceeding 0.3m in depth and as

per specification complete.

3 Sand Filling 0.00

Filling in foundation, trenches and plinth with river sand, well watered

and compacted in layers of 1.8 mtr, with top surface dressed and

leveled to proper gradient including cost of all materials, conveyance, Cum 466.19 2348.01 1094629.79

all taxes and royalties, loading and unloading, including cost of all

labour, sundries, T & P etc. All complete as per directions of the

Engineer -in-charge.

4 Back Filling 0.00

Filling available excavated earth (excluding rock) in trenches plinth

sides of foundation etc. in layers not exceeding 20 cm in depth ,

consolidating each deposited layers by ramming and watering, lead up cum 314.46 177.59 55845.70

to 50m and lift up to 1.5 mt etc. including cost of all labour, sundries T

& P etc complete in all respect as per the direction of Engineer-In-

Cement concrete of proportion (1:4:8) in foundation and floors using

4cm size clean hard black crusher broken granite stone metal of

approved quality and from approved quarry including hoisting,

lowering and laying concrete in layers not exceeding 15 cm. (6") thick

to the required level ramming, watering, curing etc. complete Cum 66.77 8009.58 534766.44

including cost, conveyance, royalties of all materials with all labour

and T&P required for the work etc. complete in all respect and as per

the direction of the Engineer-in-charge.

6 Anti-termite Treatment 0.00

Providing & applying of pre constructional anti-termite treatment

Confirming to IS 6313 (Part-II) and creating chemical barrier under

and around the column pits, wall trenches, basement excavation top

surface of plinth filling, junction of wall and floors along with external

perimeters of building, expansion joints, surrounding the pipes and

conducts etc. at the rate at 7 ,5 liter per sqm on vertical surface and sqm 575.88 94.40 54363.07

5.0 liter per sqm on horizontal surface. Chemicals:- Imidachloprid

30.5 SC , Doses: - 2.1 ml per lit of water cost of all materials,

labour,conveyance, T&P , all taxes and hire charges of machinaries as

per direction of Engineer-incharge. (Make :- HI-Solution or Smart

Care Pest Control or Bharat Pest Eradicators)

7 Fly Ash brick(1:6) 0.00

Fly Ash brick masonry in cement mortar (1:6) in Substructure using

Fly Ash bricks of 25 Cm. x 12 Cm. x 8 Cm. size having a crushing

strength of not less than 75 kg./sqcm with dimensional tolerance ±

2% including splays cutting circular moulding chamfering and

corbelling and similar such type of works with all necessary projections 0.00

watering and curing after immersing the bricks in water at least for six

hours before use including cost, conveyance, royalties and taxes of all

materials with all labour,labour cess and T & P required for the work

complete in all respect as per direction of Engineer-in-Charge.

Foundation cum 87.92 7564.27 665048.08

Providing, lifting, hoisting and laying Reinforced cement concrete of M-

25 grade as per approved designs and drawings having a minimum

compressive strength (in work test) 250 Kg. / Square cm. in 15 cm.

cubes at 28 days after mixing and test conducted in accordance with

I.S. 516 using 12 mm. to 20 mm. size black hard crushed broken

granite stone chips and screened and washed sharp sand for mortar of

approved quality from approved quarry, washed and cleaned (

20mm. size chips not to exceeds 25 %) to be mixed in concrete

mixture with Portland slag cement (PSC) including hoisting, lowering,

laying and compaction concrete by using vibrators, watering and

curing for 28 days, centering and shuttering then after dismantling

and removing debris from the work site and finishing the exposed

Digitally signed by JAYA

No Item of Work Unit Quantity Rate Amount

surface smooth providing grooves or beads wherever necessary

including cost, conveyance, loading, unloading, royalties and taxes of

all materials and cost of all labours, sundries, T & P required of the

work etc.complete in all respect as directed by the Engineer-in- 0.00

Charge. But excluding cost and conveyance of M.S. rods or Tor steel

and binding wires and labour charges for straightening, cutting,

bending etc. of M.S. rods or tor steel tying the grills and placing in

proper position.

Foundation and plinth 0.00

Foundation Cum 42.53 10602.35 450864.81

Column (Below Plinth) Cum 8.40 21391.05 179684.84

Ground Floor 0.00

First Floor 0.00

Second Floor 0.00

Terrace Floor 0.00

9 Reinforcement 0.00

Supplying Cutting, straightening coiled or bent up M.S. Rod or tor

steel of primary steel producers such as SAIL / Tiscon / RINL / JINDAL

STEEL / SHYAM STEEL (grade Fe-500D) etc. including bending,

binding, welding and jointing if necessary and tying the grills and

placing in position as required for R.C.C. Work and for providing fan

hooks as required, hoisting, lowering, laying including cost, 0.00

conveyances, taxes of M.S. Rod or tor steel and binding wires of 18 to

20 gauge and labour required for the work for bending, binding and

tying the grills in all floors with labour cess etc. (payment will be made

on standard weight of B.I.S. for M.S. Rods or tor steel only) etc.

complete as per specification & direction of Engineer-in-charge.

Foundation and plinth qtl 108.99 10443.07 1138190.29

Terrace Floor qtl 15.39 10564.98 162594.99

10 FLY ASH BRICK(1:6) 0.00

Fly Ash brick masonry in cement mortar (1:6) in super structure using

Fly Ash bricks of 23 Cm. x 11 Cm. x 8 Cm size having a crushing

strength of not less than 75 kg./sqcm with dimensional tolerance ±

2% including splays cutting circular moulding chamfering and

corbelling and similar such type of works with all necessary projections 0.00

watering and curing after immersing the bricks in water at least for six

hours before use including cost, conveyance, royalties and taxes of all

materials with all labour,labour cess and T & P required for the work

complete in all respect as per direction of Engineer-in-Charge.

Ground Floor cum 123.85 7609.51 942452.48

Second Floor cum 136.34 8550.19 1165700.24

Terrace Floor cum 46.49 9128.82 424398.94

11 FLY ASH BRICK(1:4) 0.00

Providing Fly ash bricks masonry work using 23 Cm. x 11 Cm. x 8 Cm

having crushing strength not less than 75Kg/Sqcm in cement

mortar (1:4). Immersing the bricks in water before use in all

necessary projection splays cutting, circular moulding, corbelling etc. 0.00

Including cost of conveyance ,taxes & royalties, loading and

unloading of all materials & cost of all labour, scaffolding ,watering &

curing ,sundries, T & P etc. complete as per the direction of Engineer-

Ground Floor cum 4.18 8029.78 33580.55

First Floor cum 14.09 8467.30 119312.76

Second Floor cum 14.09 8970.45 126402.67

12 16 mm Plastering 0.00

Digitally signed by JAYA

No Item of Work Unit Quantity Rate Amount

Providing 16 mm thick cement plaster with cement mortar of mix

(1:6) with screened and washed sharp sand for mortar and finished

smooth to the rough surface of walls in all heights after racking out

joints including watering and curing, rounding of corners, providing 0.00

grooves where ever necessary with cost, conveyance, royalties of all

materials with cost of all labour,labour cess, T&P, and scaffolding

required for the work etc. complete in all respect as directed by the

Engineer in charge.

Ground Floor sqm 319.08 365.80 116718.37

First Floor sqm 300.65 379.29 114030.86

Second Floor sqm 300.65 393.44 118284.45

Terrace Floor sqm 331.02 408.29 135152.75

13 12 mm Plastering 0.00

Providing 12 mm thick cement plaster with cement mortar of mix

(1:6) with screened and washed sharp sand for mortar and finished

smooth to the rough surface of walls in all heights after racking out

joints including watering and curing, rounding of corners, providing 0.00

grooves where ever necessary with cost, conveyance, royalties of all

materials with cost of all labour,labour cess, T&P, and scaffolding

required for the work etc. complete in all respect as directed by the

Engineer in charge.

Ground Floor sqm 983.69 260.27 256026.25

Second Floor sqm 1054.50 271.26 286040.97

Terrace Floor sqm 91.25 276.99 25275.63

14 6 mm Plastering 0.00

Providing 6 mm thick cement plaster with cement mortar of mix (1:4)

with screened and washed sharp sand for mortar and finished smooth

to R.C.C. work after closed deep chipping & slurry treatment including

watering and curing, rounding of corners, providing grooves where 0.00

ever necessary with cost, conveyance, royalties of all materials with

cost of all labour, T&P, and scaffolding required for the work etc.

complete in all respect as directed by the Engineer in charge.

Ground Floor sqm 628.53 275.98 173459.32

First Floor sqm 619.61 282.32 174925.20

Second Floor sqm 619.61 288.84 178968.40

Terrace Floor sqm 49.74 295.58 14701.00

15 Water Proofing 0.00

Waterproofing application: - Providing and application of two

component polymer modified flexible cementitious waterproofing

coating at a thickness of 1.5 -2.5 mm The membrane should have

Elongation equal or more than: 30% , Crack Bridging ability : Up to 1

mm, Adhesive strength: 1.0 N/mm ² @ 28d, Tensile elongation: 60% 0.00

@ 20 ° C, Shore A Hardness >85 (between 3 - 7 days) etc. as per

direction of E.I.C (For longer span, in terrace panel of 4m*4m should

be done by groove cutting, and filling with PU Sealant)(Make:MYK /

Fosroc/Pidilite)

First Floor sqm 31.50 548.23 17269.18

16 Grading Plaster 0.00

Providing 2.5cm thick Grading Concrete over roof slab with cement

concrete (1:2:2) using 6mm size black hard granite crusher broken

chips and screened & washed sharp sand for mortar and finished

smooth to the rough surface of slab including watering and curing with 0.00

cost, conveyance, royalties of all materials with cost of all labour,

labour cess and T&P required for the work etc. complete in all respect

as directed by the Engineer in charge.

First Floor sqm 31.50 579.31 18248.24

Digitally signed by JAYA

No Item of Work Unit Quantity Rate Amount

17 Industrial vitrified tile 0.00

Supplying, fitting & fixing of Industrial vitrified tiles (40x40)cm in

floors of approved make laid on 20 mm thick cement mortar (1:4) (1

cement : 4 course sand) and filling joints with slurry including cost of sqm 176.85 1711.98 302763.56

all materials, labour T&P etc required for the work all complete as per

direction of the Engineer-in-charge

18 Vitrified Floor Tiles 0.00

Providing full body matt finish vitrified tile flooring using vitrified tiles

having thickness of min 10mm conforming to IS 13755 of 1200x600

(shade to be decided as per Ama Hospital scheme) (homogeneous) of

premium quality (JOHNSON / SOMANY/ KAJARIA/ RAK) in floors,

treads on steps and landings on 20mm thick bed of cement mortar of

mix (1:4) laid in proper slope and gradient with screened and washed

sharp sand for mortar and fixing with neat white cement

slurry,grouting the joints with neat white cement slurry mixed with

required quantities of pigments of approved make to match the

shades of the vitrified tile if required , watering and curing for 21 days,

including cost, conveyance, loading, unloading, royalties and taxes of

all materials, cost of all labour,Labour cess , sundries, T&P required for

the work, complete in all respect as per specification and direction of

Engineer-in-charge.

Ground Floor sqm 441.88 1605.10 709262.59

Second Floor sqm 415.39 1636.27 679691.26

19 Vitrified Floor Skirting 0.00

Providing, fitting, fixing vitrified tiles of premium grade having

thickness 8mm to 10mm confirming to IS 13756 of size 600mm x

600mm Plain (Ivory) of approved make (JOHNSON/ SOMANY/

KAJARIA/ RAK) as directed by Engineer-in-charge in dados skirting

and risers of steps on 12mm thick cement plaster (1:3) jointed with 0.00

neat cement slurry mixed with pigment to match the shades of the

tiles including rubbing and polishing etc. complete with cost,

conveyance, royalties of all materials all labour, labour cess complete

in all respects.

Ground Floor sqm 48.68 1572.23 76537.83

First Floor sqm 53.37 1595.70 85162.63

Second Floor sqm 53.37 1619.17 86415.23

20 Granite Flooring 0.00

Fixing Granite Tiles of approved dimension area above 0.4 sqm

(20mm thick) in floor, treads of steps and landing on 20mm thick bed

of cement mortar (1:4) jointed with neat cement slurry mixed with

pigment to match the shades of the tiles including rubbing and 0.00

polishing etc. complete with cost, conveyance, royalties of all

materials complete in all respects as per direction of Engineer-in-

Ground Floor sqm 38.41 3408.74 130929.58

First Floor sqm 32.52 3424.32 111341.91

Second Floor sqm 32.52 3439.91 111848.75

21 Granite Skirting 0.00

Fixing Granite Tiles of approved dimension area above 0.4 sqm

(20mm thick) in Dados, treads of steps and landing on 12mm thick

cement mortar (1:3) jointed with neat cement slurry mixed with

pigment to match the shades of the tiles including rubbing and 0.00

polishing etc. complete with cost, conveyance, royalties and taxes of

all materials complete in all respects as per direction of Engineer-in-

Ground Floor sqm 3.21 3567.86 11452.83

First Floor sqm 3.21 3591.33 11528.17

Second Floor sqm 3.21 3796.48 12186.72

22 Ceramic Toilet tiles 0.00

Supplying fitting, fixing ,ceramic glazed tiles 30cm x30 cm / 40cm

x40 cm in floors of size of approved make with 20mm thick bed of

cement mortar (1:4) jointed with neat cement slury mixed with 0.00

pigment to match the shades of the tiles complete including cost of

all materials,Labour T&P etc required for the work .

Ground Floor sqm 21.32 2635.59 56190.76

First Floor sqm 39.42 2651.18 104509.39

Second Floor sqm 39.42 2666.76 105123.86

Digitally signed by JAYA

No Item of Work Unit Quantity Rate Amount

23 Ceramic Skirting 0.00

Supplying & Fixing ceramic tiles in Dados, Skirting and risers of steps

on 12 mm thick cement plaster (1:3) Jointed with neat cement slury

mixed with pigments to match the shade of the tiles including rubbing 0.00

and polishing including cost of all meterials etc. complete.

Ground Floor sqm 97.21 2400.27 233328.18

First Floor sqm 89.78 2415.86 216883.94

Second Floor sqm 89.78 2432.25 218355.37

Providing and fixing System Aluminum works for Sliding doors and

windows of TOSTEM make with 35mm visible aluminum section width

in the center mullion. The extruded aluminum sections should be

made from Grade 6063 & Anodized with Texguard coating , silicon

coated to suit marine atmosphere. All profiles should be None

insulated Profiles. Corner connection will be Butt joint with Screw

using Nano gaskets for sealing. All other major Accessories should

also be made by the same manufacture. All Slider doors & windows

will be center locking. Integrated Anti-lift in slider panel, EPDM gaskets

should be used in slider windows & doors in all meeting points instead

of Brush Pile. The outer frame Depth will be 72mm. All materials which

are used should be corrosion-resistant so that they are good

24 functioning in different environments and that there are no negative 0.00

influences either on the aluminum or on the surface treatment.

The system should allow the application of glazing or panels with

thickness up to 8mm. The external perimeter of aluminium sections

should be Anodized with Texguard coating, the system should qualify

Airtightness 8 m3/h.m2 at 75Pa of pressure, Water tightness 150 Pa,

Wind load resistance 1200 Pa. System should have a 10-year warranty

on properties, functionality and design, within restrictions defined by

technical specifications of anodizing & 1-year warranty on wearing

parts only applies to normal and realistically foreseeable use. All Slider

doors & windows will be center locking .

Sliding upvc door sqm 2.52 9903.50 24956.83

25 UPVC DOOR 0.00

Supplying and fixing-Fixing of Un-plasticised poly vinyl chloride (UPVC)

(FENESTA/NCL VEKA LTD.) Casenent Door-60-Series duly

manufactured using UPVC reinforced profiles of 60mm x 55mm x

2.5mm for outer frames 102mm x 60mm x 2.5mm casement Door

Sash profile and 74mm x 60mm x 2.5mm mullion peofile capable of

mounting single glazing system, structurally reinforced with hot dip

galvanised up to 50 microns of minimum thickness of 2.0 mm

prefabricated & welded through fusion welding the door sash shall be

fitted with 12mm thick WPC Board of Greenply make duly fixed with

EPDM weathering seal resistant accessories like clipping locking

system made of aluminium 1 No. per set of sashes and th esystem

isto be installed at the site using anchor fasteners, silicon rubber

sealant,easy glazing/deglazing at site etc. including cost and

conveyance of all material, accessories, labour charges, materials and

product conforming to ASTM D 638-14,EN-447-95 and other

applicable codes and standards. (Ref.-Office of the Engineer-In-Chife

(CIVIL), Odisha Nirman Soudha,Bhubaneswar. Lt. No-16100)

Ground Floor sqm 33.81 9769.27 330298.92

Second Floor sqm 31.50 11339.33 357188.83

26 WPC Door Frame 0.00

Providing & Fixinng factory made 100% Solid WPC ( Wood Polymer

Composite )- Door Frame 125 mm x 65 mm Single Rebated, made

from Wood Polymer Composite (Single Extruded Process ) material

comparising of virgin PVC polymer of K Value 57-60 ( Suspension

Grade ), Calcium Carbonate and Natural Fibers ( Wood Powder/ Rice

Husk/ Wheat Husk ) and Non toxic additives fabricated with meter 0.00

Joints after applying PVC solvent Cement & screwed with full body

treaded star headed screws having minimum frame density of 780 kg/

cbm & an ISO 9001 - 2015 Certified Company, having good screw

holding capacity ( Screw

Withdrawal strength of ( Min. 990 N ),Minimum Compressive Strength

of 58 N/mm2, Modulus of elasticity 900N/mm2 and resistance to

spread of flame of class A category with property of being termite /

borer proof , water / Moisture Proof & Fire retardant & Fixed in

position with SS Dash Fasteners / Hold Fast of reuired dia and lenght, 0.00

, all as per specifications drawings as directed by the Engineer-In-

Charge. Material test certificate and authentication should be

compulsory provided by the manufacturing company. (Make-

Rajashree, Amulya,Terra plast)

Ground Floor rmt 24.75 1577.85 39051.76

Interior Door Hardware Each 5.00 814.20 4071.00

First Floor rmt 79.20 1709.34 135379.43

Interior Door Hardware Each 16.00 814.20 13027.20

Digitally signed by JAYA

No Item of Work Unit Quantity Rate Amount

Second Floor rmt 79.20 1709.34 135379.43

Interior Door Hardware Each 16.00 814.20 13027.20

27 WPC Door Shutter 0.00

Supplying and fixing of Powder coated 50-60 microns approved colour

of Aluminium 40mm Casement series Door Unit with suitable

aluminium extrude profiles. the system is designed to accommodate

12mm clear Factory made single leaf Solid WPC (Wood polymer)

composite door shutter of 25mm thickcompacted with wood grain

finish structural foam panel of 29mm thickness and a density of

20kg/cu.mtr shall be used as core material for fitting the metal fittings

such as tower bolts, aldrops, handles etc shall be provided. A

structural adhesive compatible with (EPS) foam shall be used for 0.00

bending the core material, The material and process for

manufacturing the door shutters shall conform to RV-TIFAC

composites Design Centre's standards and specifications and the door

shutters Conforming to relevant I.S.specification. The finish of door

shutter will be plain colour white/ Ivory/ Beige/ Light grey/ Mahogany/

Teak wood or any other colour using high quality pigments. Three

heavy whight mild steel butt hinges type-I(ISI marked) size 100mm

are to be fitted on one side of shutter.

Ground Floor sqm 7.88 5667.35 44630.39

First Floor sqm 25.20 5667.35 142817.25

Second Floor sqm 25.20 5667.35 142817.25

UPVC VENTILATORS 0.00

Providing of Upvc Ventilator duly made of Fenstech upvc FRAME

28 section 60mm x 60mm & Inbuild gasket (Minium Size 2' X2')

Ground Floor sqm 1.80 5650.71 10171.28

First Floor sqm 1.80 6879.13 12382.43

Second Floor sqm 1.80 6879.13 12382.43

UPVC VENTILATORS 0.00

Providing of Upvc Ventilator duly made of Fenstech upvc FRAME

29 section 1000mm x 60mm & Inbuild gasket (Minium Size 3'4" X2') 0.00

First Floor sqm 1.20 7658.71 9190.45

Second Floor sqm 1.20 7658.71 9190.45

30 UPVC WINDOWS 0.00

Supplying and installing UPVC - 3 tracks sliding windows and 2 sashes

(shutters) with ss mesh sash dimension of 58 mm x 32 mm and sash

dimension of 61mm x 37mm for windows with corners fusion welded,

fully reinforced with Galvanized steel of 1.2 mm to 2 mm. The sash

will be fitted with 5mm reflective toughened glass of make - Saint

gobain/ AIS/Gardian/modi. The windows must be installed complete

with all kinds of ironmongery (including EPDM gaskets, bridging 0.00

wedges and glass packers) and with suitable water draining system.

Application of Silicon sealant from Inside / Outside of Dowcorning /

GE or equivalent including cost of all materials, all labour, sundries,

T&P etc. complete in all respect as per approved drawing & direction

of Engineer-in-Charge. (Prominence / FENESTA/NCL VEKA LTD. /

Koemmerling/ DURAPLAST/Rajashree).

Ground Floor sqm 36.45 7738.70 282075.60

First Floor sqm 30.38 7738.70 235063.00

Second Floor sqm 30.38 7738.70 235063.00

Terrace Floor sqm 4.05 7738.70 31341.73

31 M.S.Grill 0.00

Supplying, fitting & fixing in all floors of M.S. grills, grill gates, M.S.

gates, garage door, collapsible gates with top and bottom rails, steel

windows, critical frames for windows, stair case and parapet railing

made out of M.S Square bar/ flat including stair case hand railing with

40mm. dia G.I.pipe etc. including painting two coats over a coat of 0.00

redoxide primer as per approved drawing and design with cost of all

materials & labour, labour cess, T&P, sundries etc. complete in all

respect as per specification & direction of the Engineer-in-Charge.

Ground Floor kg 841.50 81.89 68912.12

First Floor kg 761.97 81.89 62399.25

Second Floor kg 761.97 81.89 62399.25

Terrace Floor kg 227.70 81.89 18646.81

Digitally signed by JAYA

No Item of Work Unit Quantity Rate Amount

32 S.S. RAILING 0.00

Supplying, fitting and fixing of Stainless steel of 304 grade in hand

railing using 50mm dia of 2mm thick circular pipe with Balustrade of

size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe

bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per 0.00

approved design and specification, buffing, polishing etc with cost,

conveyance, taxes of all materials, cost of all labour,labour cess, T&P

etc. required for the work complete in all respect as per direction of

the Engineer-in-charge.

Ground Floor kg 437.54 351.42 153758.47

Second Floor kg 314.40 351.42 110485.13

33 Synthetic Enamel Paint (Iron Work) 0.00

Painting two coat with approved synthetic enamel paint to new iron

work over a coat of Red oxide primer including cost, conveyances,

royalties, taxes of all materials and cost of all labour with T&P required

for the work etc. complete as per specification & direction of Engineer 0.00

(Make-Asian/ Berger/ Dulux/ ICI or equivalent make duly approved by

Engineer-in-charge).

Ground Floor sqm 38.25 219.24 8386.08

First Floor sqm 33.38 224.79 7502.37

Second Floor sqm 33.38 230.45 7691.40

34 Synthetic Enamel Paint (Wood Work) 0.00

Painting two coat with approved synthetic enamel paint to new wood

work over a coat of Red oxide primer including cost, conveyances,

royalties, taxes of all materials and cost of all labour with T&P required

for the work etc. complete as per specification & direction of Engineer 0.00

(Make-Asian/ Berger/ Dulux/ ICI or equivalent make duly approved by

Engineer-in-charge).

Ground Floor sqm 7.88 312.94 2464.37

First Floor sqm 25.20 320.84 8085.22

Second Floor sqm 25.20 328.87 8287.42

35 Antifungal Weather Coat Paint 0.00

Wall painting two coats with Antifungal weather coat paint (1st

quality) exterior grade of approved make & approved shade over a

coat of primer to make an even finished surface in all floors and

heights with all scaffolding and staging charges including cost,

conveyance, cost of all labours, T & P, sundries etc. as required for the 0.00

work complete in all respect as per the direction of the Engineer-in-

(Make: Asian/ Berger/ Dulux/ ICI or equivalent make duly approved

by Engineer-in-Charge)

Ground Floor sqm 983.69 117.53 115610.53

First Floor sqm 1054.50 119.18 125674.86

Second Floor sqm 1054.50 120.95 127541.32

Terrace Floor sqm 91.25 122.84 11208.97

36 Plastic Emulsion Paint 0.00

Painting two coats with plastic emulsion paint with a approved quality

primer to make an even finished surface in all floors and heights to

wall surface of approved make and shade including sand papering,

applying putty wherever necessary & cost of scaffolding, staging

charges with cost, conveyance, cost of all labour,labour cess, T&P etc. 0.00

complete as per the direction of the Engineer-in-charge.

(Make: Asian/ Berger/ Dulux/ ICI or equivalent make duly approved

by Engineer-in-charge)

Ground Floor sqm 947.61 126.91 120260.24

First Floor sqm 920.26 129.43 119113.12

Second Floor sqm 920.26 132.03 121502.11

Terrace Floor sqm 380.76 134.72 51296.22

37 Cement Primer 0.00

Priming one coat with wall cement primer (water bound) to make an

even finished surface in all floors and heights to wall surface of

approved make and shade including sand papering, applying putty

wherever necessary & cost of scaffolding, staging charges with cost, 0.00

conveyance, cost of all labour,labour cess T&P etc. complete as per

the direction of the Engineer-in-charge.

(Make: Asian/ Berger/ Dulex/ ICI or equivalent make duly approved

by Engineer-in-Charge)

Ground Floor sqm 1931.29 95.93 185276.09

First Floor sqm 1974.75 98.29 194106.20

Second Floor sqm 1974.75 100.65 198766.61

Terrace Floor sqm 472.01 103.13 48678.96

Finishing plastered surfaces of walls with cement based wall putty

(Water based) of approved make (JK White/ Birla white or equivalent

make duly approved by Engineer-in-Charge) and finishing the surface

smooth and even by sand papering to receive painting in walls, at all 0.00

heights with staging wherever necessary with cost, conveyance, cost

of all labour,labourcess, all T&P etc. required for the work complete in

all respect as per the direction of the Engineer-in-charge.

Ground Floor sqm 1931.29 99.00 191201.28

Digitally signed by JAYA

No Item of Work Unit Quantity Rate Amount

First Floor sqm 1974.75 99.00 195504.32

Second Floor sqm 1974.75 99.00 195504.32

Terrace Floor sqm 472.01 99.00 46729.58

Digitally signed by JAYA

(100 BEDED GIRL'S HOSTEL)

Sl No Item Description Unit Qty Rate Amount

1 Wiring for light point/ fan point/ exhaust fan point/ call

bell point with 1.5 sq.mm FRLS PVC insulated copper

conductor single core cable in surface / recessed medium

class PVC conduit, with modular switch, modular plate,

suitable GI box, ceiling Rose and earthing the point with

1.5 sq.mm. FRLS PVC insulated copper conductor single

core cable etc as required.

2 Wiring for group controlled looped light point/ fan point/

exhaust fan point/ call bell point ( without independent

switch control ) with 1.5 sq.mm FRLS PVC insulated

copper conductor single core cable in surface / recessed 0.00

medium class PVC conduit, ceiling rose and earthing the

point with 1.5 sq.mm FRLS PVC insulated copper

conductor single core cable etc. as required.

3 Wiring for twin control light point with 1.5 sq.mm FRLS

PVC insulated copper conductor single core cable in

surface / recessed medium class PVC conduit, 2 way

modular switch, modular plate, suitable GI box and Nos 6.00 1753.48 10520.88

earthing the point with 1.5 sq.mm FRLS PVC insulated

copper conductor single core cable etc. as required.

4 Supplying and fixing two module stepped type electronic

fan regulator on the existing modular plate switch box Nos 75.00 553.42 41506.50

including connections but excluding modular plate etc. as

5 Supplying and fixing modular blanking plate on the

existing modular plate & switch box excluding modular Nos 10.00 29.50 295.00

plate as required.

6 Supplying and fixing suitable size GI box with modular

plate and cover in front on surface or in recess, including

providing and fixing 3 pin 5/6 amps modular socket outlet Nos 41.00 645.46 26463.86

and 5/6 amps modular switch, connection etc. as

7 Supplying and fixing suitable size GI box with modular

plate and cover in front on surface or in recess, including

providng and fixing 2 Nos. 3 pin 5/6 A modular socket Nos 107.00 914.50 97851.50

outlet and 2 Nos. 5/ 6 A modular switch, connections etc.

8 Supplying and fixing suitable size GI box with modular

plate and cover in front on surface or in recess, including

providing and fixing 6 pin 15/16 amps modular socket Nos 34.00 807.12 27442.08

outlet and 15/16 amps modular switch, connection etc. as

9 Supply, delivery, installation & testing of TV outlet boards

containing a clip-in type modular TV Socket outlet fixed

on metallic concealed box including connections and Nos 2.00 676.14 1352.28

making good the damages caused complete as required

and as per direction of Engineer-in-charge.

SUB MAIN WIRING 0.00

10 Wiring for circuit/ submain wiring alongwith earth wire

with the following sizes of FRLS PVC insulated copper 0.00

conductor, single core cable in surface/ recessed medium

class PVC conduit as required.

b. 2 X 4 sq. mm + 1 X 1.5 sq. mm earth wire Mtr 300.00 221.84 66552.00

c. 4 x 6sqmm + 2 x 2.5sqmm earth wire Mtr 150.00 374.06 56109.00

d. 4 x 10sqmm + 2 x 4sqmm earth wire Mtr 150.00 523.92 78588.00

11 Supply and drawing co-Axial TV cable Rg-6, grade 0.7mm

solid copper conductor PE insulated shielded with fine

tinned copper braid and protected with PVC sheath in Mtr 60.00 113.28 6796.80

existing surface/recessed steel/PVC conduit as required.

LIGHTING FIXTURES 0.00

Digitally signed by JAYA

Sl No Item Description Unit Qty Rate Amount

Note: Dummy box for surface mounted fixtures only, fans

and exhaust fans with all accessories, as required.(The

colour temprature for fixtures shall be above 4000 deg K, 0.00

CRI Min 80 & white in colour as per application)

12 Supplying & fixing of 9W Downlight, recessed in ceiling,

with fixed light distribution suitable for 9W 6000K LED Nos 7.00 1362.90 9540.30

based lamp with electronic driver etc,complete with all

fixing accessories as required.

13 Supplying & fixing of 12W Downlight, recessed in ceiling,

with fixed light distribution suitable for 12W 6000K LED Nos 38.00 1805.40 68605.20

based lamp with electronic driver etc,complete with all

fixing accessories as required.

14 Supplying & fixing of 18W Downlight, Surfaced fitting,

with fixed light distribution suitable for 18W 6000K LED Nos 12.00 3363.00 40356.00

based lamp with electronic driver etc,complete with all

fixing accessories as required.

15 Suppling and fixing single wall mounted 20watt LED type

batten fitting compelet with electronic driver and LED

Tube etc directly wall/ ceiling including conecttion with 1.5 Nos 203.00 1545.80 313797.40

SQMM FRLS PVC insulated copper conductor and earthing

the body etc as required.

16 Suppling and fixing wall mounted 10watt LED type Mirror

fitting compelet with electronic driver and LED Tube etc

directly wall/ ceiling including conecttion with 1.5 SQMM Nos 6.00 713.90 4283.40

FRLS PVC insulated copper conductor and earthing the

body etc as required.

17 Supplying and fixing Surface mounted 10 watt LED type

Bulk-head fitting comprising of pressure die cast housing

with acrylic diffuser (IP65) and complete with integrated

electronic driver etc directly on wall/ceiling including Nos 13.00 2183.00 28379.00

connection with 1.5 sq.mm FR PVC insulated copper

conductor cable and earthing the body etc. as required.

18 Supplying and fixing call bell/ buzzer suitable for single

phase,230 V, complete as required.

19 Supply, delivery and fixing of Ceiling fan hook box made

out of 18 swg GI sheet and containing 10 mm dia round

ms bar projecting atleast 150mm on either side & duly Nos 75.00 141.60 10620.00

bent to accommodate ceiling fan down rod bolt & having

earthing arrangement as per direction of Engineer-in-

20 Supplying and fixing extra conduit down rod of 20 cm

length G.I. pipe 15 mm dia, heavy gauge including Nos 75.00 46.02 3451.50

painting etc. as required as per direction of Engg.-in-

21 Supply and installation of star rated ceiling fan of following

sweep including wiring the down rods of standard length 0.00

(up to 30cm) with 1.5sq mm FRLS PVC insulated copper

conductor etc. as required.

22 Supply and installation of ISI marked wall mounted fan of

following sweep including Connection from provided 0.00

23 Supply and installation of 250mm. 230V A.C exhaust fan,

with louver in the existing opening including making good Nos 16.00 2183.00 34928.00

the damage connection testing commissioning etc as

DISTRIBUTION BOARD 0.00

24 Supplying and fixing of following ways surface/ recess

mounting, vertical type, 415 V, TPN MCB distribution

board of sheet steel, dust protected, duly powder painted,

inclusive of 200 A tinned copper bus bar, common neutral 0.00

link, earth bar, din bar for mounting MCBs (but without

MCBs and incomer ) as required . (Note : Vertical type

MCB TPDB is normally used where 3 phase outlets are

25 Supplying and fixing single pole blanking plate in the

existing MCB DB complete etc. as required.

Digitally signed by JAYA

Sl No Item Description Unit Qty Rate Amount

26 Supplying and fixing following rating, Four pole, (single

phase and neutral), 415 volts, residual current circuit

breaker (RCCB), having a sensitivity current upto 100 0.00

milliamperes in the existing MCB DB complete with

connections, testing and commissioning etc. as required.

b) 6-32A Single Pole MCB Nos 72.00 165.20 11894.40

MV PANELS 0.00

27 HOSTEL LT PANEL 0.00

Design, Fabrication, Supply, Erection,Testing and

commisioning of Powder coated Main LT Panel fabricated

out of 14 guage CRCA sheet steel in cubical,

compartmentallised, free standing floor /wall mounted,

dust and vermin proof, with reinforcement of suitable size

angle iron, channel, T -iron or flats as required. Cable

gland plates shall be provided on top as well as bottom of

the panels. Panels shall be treated with all anticorrosive 0.00

process before painting as per specification. Panels shall

be suitable for 415V, 3-Phase, Four wire, 50 Hz supply

complete with earth bus and lifting hooks as required in

case of large panels.Approval shall be taken for each

panel before fabrication. (All hardwares like nuts and bolts

used shall be Galvanized and Zinc passivated) as per

Type of construction: Form 3B 0.00

IP classification: 42 0.00

Colour: Gray Powder Coated, as per approved sample

Incomings: 0.00

Incomer 1:- (EB Supply) 0.00

1 nos, 160 Amps. 4 pole MCCB , i.e four pole Moulded

Case Circuit Breaker of fault breaking capacity 25 KA 0.00

(ICS=ICU up to 433 V) complete in all respect.

(ii) 01 set of 0-160Amps Ammeter with CTS. (DIGITAL)

(iii) 01 set of 0-500 voltmeter . 0.00

One set - Indicating lamp for ON/OFF/Trip and Phase

indication with control fuse/ MCB.

Bus Bars: 0.00

TPN aluminum bus bars of minimum of 200 Amps capacity

with heat shrinkable colored sleeves and I/C DMC/SMC

bus bars supports at required intervals complete for cross 0.00

section, size supports & their spacing etc. for withstanding

fault level of 25 MVA for 1 Sec.

Outgoings: 0.00

EIGHT (10) - Outgoing Feeders (For 3 LDB, 3 PDB, 1

UPS and 3 Spare) comprising of

One(1)- 63 Amps, TPN, MCB 0.00

Four (4) - Outgoing Feeders (For 4 Spare)

One (1) 40 Amps, DP, MCB 0.00

One (1) - 40KA Type II 3+1 spd with 1no 4P MCB

Panel complete as above Set 1.00 144927.60 144927.60

28 Supply of following sizes of PVC sheathed PVC/XLPE

insulated Aluminium conductor armoured cable of 1.1 KV 0.00

grade conforming to IS:7098 part-1 / IS:1554 part-1

respectively & ISI marked.

a) 3.5C x 70 Sqmm XLPE cable Mtr 100.00 522.74 52274.00

CABLE LAYING 0.00

29 Laying of One No. PVC insulated and PVC sheathed/XLPE

power cable of 1.1 KV grade of following size in the

existing RCC/HUME/MASONERY TRENCH/HDPE Pipe/DWC 0.00

Pipe/ Metal Pipe/On Wall Surface(Clamped with

saddle/PVC & UPVC Pipe)/ Cable Tray etc. as required.

TERMINATION OF CABLES 0.00

Digitally signed by JAYA

Sl No Item Description Unit Qty Rate Amount

30 Supply & Making end Termination with brass compression

gland and Cu/aluminium lugs for PVC insulated and PVC 0.00

sheathed cable of 1.1 kv grade (without cost of Cable)

31 S/IT/C of materials and installation of GI earth plate

600mm x 600mm x 6mm thick ISI marked with G. I. nut

bolts & washers including cost of burnt wood charcoal,

salt, foreign soil, water pouring arrangements, brick

masonary enclosure on top with removable RCC cover Nos 2.00 7670.00 15340.00

complete with labour for excavation of pit in all kinds of

soil & rock as required and as per direction of Engineer-in-

charge.The entire earthing system should be

Replacement Warranty will be 2 years

32 Providing and fixing 25 mm X 5 mm dia GI strip on

wall/surface or in recess for connection etc. as required. Mtr 35.00 177.00 6195.00

LIGHTING ARRESTER 0.00

33 Supply of 8 mm Aluminum Round Conductor.Tested as

per IEC 62561. as per direction of engineer in charge. Mtr 250.00 175.82 43955.00

34 Supply of Roof conductor holder for parapet- Polyamide

Conductor holder:With M8 female thread or diameter

7mm, M8 Screw to connect the conductor holder.Weather

and temperature resistant from -35 to +90 degree Celsius No 100.00 60.18 6018.00

tested. Conductor holder @ 1 meter distance.Tested as

per IEC 62561. as per direction of engineer in charge.

35 Supply of Polyamide roof cable holder for flat roof: DIN

48829 Form B1. Closed form with bottom. Filling weight

1Kg (frost-resistant concrete). Sleeve from polyethylene, No 25.00 234.82 5870.50

black @ 1 meter distance. Tested as per IEC 62561.

36 Supply of Connector: For T cross and parallel connectors.

Quick installation using hexagonal bolt M10X30 high- No 12.00 239.54 2874.48

grade hot dip galvanised. Tested as per IEC

62561.(2nos/expansion piece ).

37 Supply of 1 mtr vertical air terminal with mounting

accessories on the flat surface to meet the requirements

of IS/IEC 62305. Tested for Electrical , mechanical and No 8.00 1373.52 10988.16

chemical as per IEC 62561. Tested for 100kA lightning

38 Supply for Providing of Stand for Fang Fix system 16 kg

made up of frost resistant concrete.

39 Supply of Test Joint (Folding Clamp) suitable to connect

8mm round conductor and max by 30x3 mm GI strip as No 6.00 448.40 2690.40

specified in drawing and directed by Engineer. Tested for

100kA lightning current.

40 Supply of IP 66 Poly Propylene Junction Box. Installation

at 1Mtr Height For Test Joint .Internal dimensions: No 6.00 326.86 1961.16

41 Supply of Galvanised Steel Flat 30X3 mm thickness from

earth electrode directly in ground as required. Flat Mtr 50.00 318.60 15930.00

conductor Hot Dipped Galvanized. Tested as per IEC

42 Supply for Providing of Cross connector for Flat: Suitable

for 30mm Galvanised steel strip. Installed with 4 nos of No 6.00 297.36 1784.16

hexagonal plate. Tested for 100kA lightning current.

43 Supply of flat conductor holder- Fit: FL 30, With mounting

hole 6.2 x 22 mm, With 2 cylinder bolts M6 x 16 and

over-piece from hot-dip galvanised steel, Bottom section No 10.00 307.98 3079.80

from polyamide, black. Tested as per IEC 62561.

44 Supply for Providing of Plastic Corrosion Protection strip:

Approx 1.1 mm thick. Width 50mm. Made of petrolatum- Mtr 50.00 1037.22 51861.00

coated chemical fibre fabric.

45 Supply of UL Listed maintenance free ,Low carbon copper

coated earth rod of 3 metre electrode having diameter of No 6.00 4935.94 29615.64

17.2 mm with copper coating thickness of 250micron

tested as per IEC 62561-2.

46 Supply of universal clamp made of SS to connect rod with

flat conductor.

Digitally signed by JAYA

Sl No Item Description Unit Qty Rate Amount

47 Supply of Earth conductivity enhancing mineral compound

shall be of 25 kg/pit tested as per IEC 62561-7,TCLP No 6.00 3348.84 20093.04

48 Supply of The above arrangements shall be provided with

Heavy duty earth champer of 5000kg load bearing No 6.00 2559.42 15356.52

capacity to ensure the safety of earthing system.

49 Installation of The above arrangements including all

accessories as per Direction of Engg. In charge.

FIRE FIGHTING 0.00

1 Terrace Pump 0.00

Supplying, installation, testing and commissioning of

electric driven terrace pump suitable for automatic 0.00

operation and consisting of following, complete in all

respects, as required: (Terrace Pump)

Horizontal type, multistage, centrifugal, split casing pump

of cast iron body & bronze impeller with stainless steel 0.00

shaft, mechanical confirming to IS : 1520

Suitable HP squirell cage induction motor TEFC type

suitable for operation on 415 volts, 3 phase, 50 Hz, AC

supply with IP55 class of protection for enclosure, 0.00

horiziontal foot mounted type with Class-'F' insulation,

conforming to IS-325.

M.S.fabricated common base plate, coupling, coupling

guard, foundation bolts etc.as required.

Suitable cement concrete foundation duly plastered and

with anti vibration pads.

450 lpm at 35 m Head 0.00

Pump as Above Set 1.00 94400.00 94400.00

2 MCC Panel 0.00

Supply, installation, testing and commissioning of Wall

mounted sectionalised, front operated top entry dust and

vermin proof M.V.Panel Boards suitable for operation at

415V, 3 phase, 4 wire, 50Hz distribution system

fabricated out of 2.0 mm thick CRCA sheet,

compartmentalised with hinged lockable doors, dust and 0.00

vermin proof, powder coated of approved shade after 7

tank treatment process, cable alley, insulated busbar with

heat shrienkable PVC sleeve, base channel, complete with

all accessories including interconnections, proper earthing

etc as required. Make:-LEGRAND, L&T, Siemens or

One (1)- 63 Amp, 10 KA,4P MCB with 3 Nos Phase

indicating lamps with control fuse/ MCB, Digital Voltmeter 0.00

& Ammeter with selector switch suitable for motor duty.

One (1) - DOL with O/L and Single Phasing Preventor

suitable for 10 HP motor(minimum). ON/OFF indication 0.00

lamps, Auto manual switch and ON/OFF push button.

One (1) - Set of Auxilliary relay for automatic operation

through pressure switch.

Panel As Above Set 1.00 32767.42 32767.42

3 Supply, laying, connecting, testing & commissioning of

following size of 1.1 kv grade multicore aluminium

conductor XLPE insulated PVC sheathed armoured cable

as per IS: 7098:1988 (Part-I) with upto date

amendments etc. complete as required. Tagging on both 0.00

the ends will be done with aluminium tags etc. complete

as required.(Quantities as per site requirement shall be

finally estimated & executed accordingly with prior

a) 3 core x 16 sqmm Al. Ar. XLPE Cable (Fire Fighting MCC

Panel to Terrace Pump Set)

4 Supplying and making indoor end termination with brass

compression gland (Heavy duty) and suitable copper /

aluminium lugs for following size of XLPE insulated PVC

sheathed copper/ aluminium conductor armoured/ 0.00

unarmoured cable of 1.1 KV grade including cost of

ferrules, cable sockets, insulation tape & other accessories

etc. complete as required.

Digitally signed by JAYA

Sl No Item Description Unit Qty Rate Amount

Supply and installing of following size of perforated hotdip

G.I. cable trays including horizontal and vertical bends,

reducers, tees, cross members and other accessories as

required and duly suspended from the ceiling with full

threaded GI suspenders, along the wall with supports and 0.00

including painting etc. as required & approved by thye

Engineer Incharge.(Make: Saimetal/ Indeana/

a) 100 mm width x 40 mm depth x 1.6 mm thickness Mtr 45.00 410.64 18478.80

6 Providing, laying, testing & commissioning of 'C' class

heavy duty MS Pipe conforming to lS 3589 and 1239

including fittings like elbows, tees, flanges, tapers, nuts

bolts, gaskets etc.,fixing the pipe on the wall/ceiling with 0.00

proper core cutting & filling with treatment, providing

proper supports, using clamps and painting with two or

more coats of synthetic enamel paint of required shade

complete as required.

a) 100mm dia (Heavy class) as per IS-1239(Part-I)/2004

b) 65mm dia (Heavy class) as per IS-1239(Part-I)/2004

c) 25mm dia (Heavy class) as per IS-1239(Part-I)/2004

7 Providing, fitting & fixing of following size cast iron double

flanged slim seal wafer type Butterfly valves with EPDM

rubber lined with lever operated as per IS-13095 with ISI

mark of pressure ratting PN-1.60 including fixing the

same with supply of required jointing materials like rubber 0.00

insertion, MS nuts & bolts, paint etc. and testing the joints

with required water pressure for all floors etc. all complete

as per specification & direction of E.I.C.

Providing, fitting & fixing of following size cast iron double

flanged Y type strainer with SS 304 perforated screen

confirming to IS 1538 with ISI mark of pressure rating

PN-1.60 including fixing the same with supply of required

jointing materials like rubber insertion, MS nuts & bolts, 0.00

paint etc. and testing the joints with required water

pressure & all complete as per specification & direction of

9 Providing, fixing, testing and commissioning of following

size cast iron double flanged type Non Return Valve as

per IS- 5312 (Part 1): 2004 with ISI mark of pressure

ratting PN-1.60 including fixing the same with supply of

required jointing materials like flanges, rubber insertion, 0.00

MS nuts & bolts, paint etc. and testing the joints with

required water pressure etc. all complete as per

specification & direction of E.I.C.

10 Providing, fixing, testing and commissioning of 25 MM C.I.

single Air Relief Valve with stop cock confirming to

IS:14845/2000 with ISI mark for water works purpose

including fixing the same with hydrant riser including Nos 1.00 3304.00 3304.00

testing & commissioning the system etc. all complete as

per approved specification & direction of EIC.

11 Providing, fixing, testing and commissioning of 25MM SS

Ball Valve suitable for test pressure of not less than

15kg/sqcm with nuts, bolts, gaskets, necessary Nos 4.00 2230.20 8920.80

accessories etc. all complete as per approved specification

& direction of EIC.

12 Supply, Installation, Testing & Commissioning of Pressure

gauge of 0-16 Kgf/sq.cm. range with cut-off bronze ball Nos 1.00 1864.40 1864.40

valves below of suitable size with all accessories as per

direction of Engineer-in-charge.

Digitally signed by JAYA

Sl No Item Description Unit Qty Rate Amount

13 Supply, Installation, Testing & Commissioning of Swinging

pattern wall fixing first aid hose reel made from MS sheet

and waterways and moving parts with rubber hose of 20

mm dia. and 30 mtrs. long with ABS(Plastic) shut-off Nos 2.00 10001.68 20003.36

nozzle as per IS: 444/IS: 12585 Type-I., complete with

all accessories as per direction of Engineer-in-charge.

FIRE EXTINGUISHER 0.00

Note : [1] All Fire Extinguisher shall be HCFC, CFC and

Halons free. [2] The Fire Extinguisher

Manufacturer/Supplier shall provide declaration, Technical 0.00

Data Sheet/cutsheet of All type of Fire extinguisher to be

14 Providing and fixing Carbon-di-oxide fire extinguishers

consisting of welded M.S cylindrical body,squeeze lever

discharge valve fitted with internal discharge tube, ISI

marked high pressure discharge hose, discharge nozzle,

suspension bracket, confirming to IS : 15683 finished 0.00

externally with red enamel paint and fixed to wall with

brackets with rawl plug/dash fasteners complete with

internal charge with CO2 gas conforming to IS : 307-

15 Providing and fixing ABC stored pressure dry chemical

powder (mono ammonium phosphate) Fire Extinguisher

IS : 15683 latest revision manufacturer and of CRCA

sheet in welded construction, finish with High quality

epoxy polyster powder coated complete with brass forged 0.00

ball valve, gun metal cap and nozzle, including initial filled

and wall suspension bracket (suitable for fighting in class

'A', B & 'C' that is wood, textile, flammable liquid, electric

B MISCELLANEOUS WORK : 0.00

16 Single sided EXIT LED Light fitting signage(both side

visible) with built in battery back-up for 2 hrs with proper

wiring with PVC conduiting from the existing power

sources for all floors etc.

CCTV SYSTEM 0.00

Supply,installation, testing and commissioning of 36

Channel DVR 1080P with 2 Sata Ports upto 10TB each, 32

BNC interface, supporting coaxitron connection. HDTVI

input of 4MP@30fps, 4MP@25fps, AHD input 4MP Set 1.00 53100.00 53100.00

1080p@25fps with 1CVBS output, 1HDMI output, 1VGA

output, 1 audio input, 1oudio output. Video compression

of H.265 pro+/H.265 pro/H.265/H.264+/H.264.

2 Supply,installation, testing and commissioning of 4 MP

Dome / Bullet Camera with 25 Mtrs IR Range.

3 Supply & Laying of RG59+ 3 Core cable using Rigid PVC

Pipe in concealed manner per running metre of cable laid. Mtr 350.00 82.60 28910.00

4 Supply,installation, testing and commissioning of BNC &

5 Supply,installation, testing and commissionining of 8 TB

CCTV Surveillance Hard Disk.

6 Supply,installation, testing and commissionining of 10

Amps Power Supply.

7 Supply,installation, testing and commissioning of Smart

32" LED Monitor.

8 Supply,installation, testing and commissioning of 10 Mtrs

9 Supply,installation, testing and commissioning of Bird

10 Supply,installation, testing and commissioning of Wireless

Digitally signed by JAYA

Sl No Item Description Unit Qty Rate Amount

11 Supply,Installation,Testing & Commissioning of 6U/500D

Wall Mount Rack with Accessories: The rack size should

be 600W x 500D, Front frame integrated with top,

bottom, front and two side panels for better rigidity and

strength, Front Glass Door with Lock loaded, Compliance

with standards shall be UL 2416., DIN 41494, IEC EN

9001:2008 including Power Distribution Unit (06/16 Amp

Indian-Standard - 06 Socket - Single Pole / Screw

Mountable / 16 Amp MCB / Alternating Current - 16 Amp

3 Pin Plug with Power Cable 2.5 sq.mm 3 meter Lengt), 1

cooling Fan(230V AC - 90 CFM, dB 42), 2nos 1U Metal

Cable manager with Plastic cable loops and H/W screw.

Digitally signed by JAYA

(100 BEDED GIRL'S HOSTEL)

Description Unit Qty Rate Amount

1 A- Internal Sanitary & Plumbing System

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes

conforming to IS:15778/ASTM Pipe, having thermal stability for

hot & cold water supply, including all CPVC plain & brass threaded

fittings including fixing the pipe with clamps at 1.00 m spacing. Mtr 25.00 338.13 8453.23

This includes jointing of pipes & fittings with one step CPVC

solvent cement and testing of joints complete as per direction of

Engineer-in-Charge

In ground floor

20mm dia C-PVC Pipes Mtr 15.00 377.03 5655.50

2 25mm dia C-PVC Pipes

3 32mm dia C-PVC Pipes Mtr 5.00 661.63 3308.13

4 In First Floor

20mm dia C-PVC Pipes

5 25mm dia C-PVC Pipes Mtr 20.00 461.40 9228.07

6 32mm dia C-PVC Pipes Mtr 10.00 677.62 6776.15

7 40mm dia C-PVC Pipes Mtr 5.00 914.38 4571.91

8 In Second Floor

20mm dia C-PVC Pipes

9 25mm dia C-PVC Pipes Mtr 20.00 475.41 9508.20

10 32mm dia C-PVC Pipes Mtr 10.00 693.59 6935.92

11 40mm dia C-PVC Pipes Mtr 5.00 934.87 4674.33

12 In Terrace Floor

32mm dia C-PVC Pipes

13 40mm dia C-PVC Pipes Mtr 20.00 955.40 19107.98

14 50mm dia C-PVC Pipes Mtr 10.00 1412.09 14120.94

15 Supplying all materials, labour, T&P and fitting and fixing U-PVC

SWR soil waste ventilating pipes and fittings of the following

outside diameter conforming to ISI No. 13592/1992 to walls with

nails, bobbins and wooden plugs or laying in trenches including

jointing with supply of approved rubber lubricant by non-heat

application method/as per manufacturer ’ s specification, testing, Mtr 85.00 399.19 33931.49

earthwork in excavation in all kinds of soil and refilling of trenches

as per specification and direction of the Engineer in charge.

(Supreme, Astral, Ashirbad) .

16 75mm PVC plain bend Each 20.00 217.12 4342.40

17 75mm PVC socket plain Each 30.00 95.93 2878.02

20 110mm PVC socket plain Each 20.00 188.92 3778.36

21 110mm PVC plain bend Each 25.00 273.76 6844.00

22 110mm PVC door bend Each 6.00 346.45 2078.69

23 110mm PVC door Tee Each 6.00 455.48 2732.88

24 110mm PVC plain Tee Each 30.00 380.79 11423.58

25 110mm PVC door cross Tee Each 4.00 650.42 2601.66

26 110mm dia U-PVC Offset without ear Each 2.00 480.73 961.46

27 110mm PVC vent cowl Each 11.00 68.68 755.44

29 Supply,Providing, fixing, testing and commissioning in position UV

stabilised 75 mm dia UPVC Rain water pipe with Fittings (IS:

13592 Type - B). In case of ceiling hanging, the supply of Pipe Mtr 20.00 419.16 8383.19

Clamps (Chilly/MS angle) as per engineer in charge.110 mm

diameter. (IS:13592, Type -B).

30 Supply,Providing and fixing 150 mm x 150 mm.dia CI Grating

for Rain water pipes 110 mm dia.

31 Supplying all materials , labour, T&P and fixing Vitreous china

water closet ,squatting pan ( Indian type W.C. pan / Orissa

pattern squatting pan ) duly embedded in cement concrete

1:5:10 using hard granite metal 4cm nominal size including fixing

a pair of vitreous china 250mmx130mmx30mm foot rest, fixing

100mm dia hci 'P' or 'S' trap for water closet squatting pan Each 10.00 3042.87 30428.66

including jointing the trap with pan in cement mortar (1:1),

cutting the floor and mending good the damages etc. all complete

as per P.H. specification and direction of Engineer-in-charge .

580mmx440mm size Orissa Pan (White) (Parryware/ Hindware/

Digitally signed by JAYA

Description Unit Qty Rate Amount

32 Supplying all materials,labour,T&P and fitting and fixing vitrous

Chaina washed down water Closet (European type water closet -

EWC) with integral "P" or "S" type trap to the floor including

wodden plug and chromoum plated screw including jointing the

trap with soil pipe in CM(1:1) fixing plastic seat cover for washed

down water closet with crmium plated brass hinges and rubber Each 11.00 3289.84 36188.24

buffers including polishing etc all complete as per specification

and direction of Engineer-in-charge.

European Water Clost "S" or "P" trap (Parryware/ Hindware/

33 Matrix Set -1 (WB 65 x 35 with one pair mounting brackets, EWC

& Cistern complete with fittings & seat cover, one no hinged rail Each 1.00 78575.49 78575.49

76 cm and five nos of grab rails 60 cm) (Hindware).

34 Supplying all materials, labour, T&P and fitting and fixing 10 litres

capacity low level flushing cistern with a pair of cast iron or M.S

brackets complete with fittings such as siphonic arrangements

15mm nominal size brass/pvc ball valve with polythene float CP

brass handle, unions and couplings for connection with inlet,

outlet and overflow pipes,32mm dia CP flush bend,15mm dia pvc Each 21.00 1851.77 38887.25

inlet connection pipe including cutting holes and making good the

same and connecting the flush bend with cistern and closet and

connecting the inlet pipe with supply main etc all complete as per

specification and direction of the Engineer in charge.

10 litres PVC L.L. Cistern (Slimline-white)

35 32mm dia flush bend for L/L cistern Each 21.00 81.77 1717.25

36 Supplying all materials ,labour ,T&P and fixing Wash basin with

hole for pillar taps with cast iron or MS brackets painted white

including cutting holes in walls and making good the damages

with supply of wooden plugs, screws and cement etc. fixing

pedestral for wash basin recessed at the back for the reception of

pipes and fittings, fixing PVC waste pipe of 32mm nominal

diameter for wash basin including brass check nut complete,

fixing pillar taps capstan head screw down high pressure lettered Each 5.00 4843.90 24219.50

'Hot' and 'Cold' with long screws, shanks and back nuts of 15mm

dia nominal bore, fixing15mm dia PVC inlet connection pipe and

making connection with pillar cocks and supply mains for wash

basin , fixing 12mm dia CP brass waste etc.all complete as per

specification and direction of Engineer-in-charge.

550mmx400mm size wash hand basin with Porcelain

pedestal(Parryware/Hindware/Somay/Cera)

Under Counter basin (560x450) (Hindware) Each 20.00 3319.34 66386.80

37 32mm dia PVC waste pipe with brass coupling nut Each 25.00 62.58 1564.39

38 15mm dia PVC inlet connection pipe 0.45m long Each 25.00 42.13 1053.15

39 Supplying all materials, labour, T&P and fixing wash Kitchen sink/

Laboratory sink with outlet at end and weir overflow including

fitting and fixing a pair of cast iron or MS brackets painted white,

fixing 50mm/40mm dia ss waste, fixing 50mm/40mm dia PVC

waste pipe 910mm long with supply of wooden plugs, screws and Each 3.00 6271.07 18813.22

cement etc including cutting holes in walls and making good the

damages etc all complete as per specification and direction of the

Engineer in charge. 600x450x250 mm stainless steel kitchen sink

40 Supplying all materials, labour, T&P and fitting and fixing brass/CP

fittings of the following nominal bore with supply of all jointing

materials complete as per specification and direction of the Each 11.00 1085.60 11941.60

Engineer in charge.

15mm dia CP 2way bib cock (Euronics RIV-1004R)

41 15mm dia CP Health faucet with Hose Pipe (Euronics EHF01) Each 11.00 895.62 9851.82

42 15mm dia CP Short Body Bib cock (Euronics RIV-1010R) Each 10.00 824.82 8248.20

43 15mm dia CP Long Body Bib cock (Euronics RIV-1011R) Each 21.00 919.22 19303.62

44 15mm dia CP Angle stop cock with wall Flange (Euronics RIV-

45 15mm CP Revolving shower with shower Arm. ( Plaza make)

46 20mm dia CP Consealed Stop Cock (Jaquar ALD-CHR-081

FLR-CHR-5083NK)

47 Sink Cock (Wall Mounted) with wall Flange(Euronics RIV-1012R)

48 15mm dia CP Pillar cock (Euronics RIV-1002R) Each 25.00 1096.22 27405.50

Digitally signed by JAYA

Description Unit Qty Rate Amount

49 15mm dia CP extension piece Each 50.00 69.97 3498.70

50 PVC Connection Pipe Each 46.00 40.12 1845.52

51 PVC Discharge Pipe Each 27.00 92.75 2504.20

52 15mm dia. C.P flange Each 70.00 47.55 3328.78

53 125mm dia CP gratting Each 52.00 110.33 5737.16

54 Supplying all materials ,labour ,T&P and fixing standard sized CP

brass towel rail / Towel ring complete with CP brass brackets

fixed to wooden plugs with chromium plated brass screws etc.all Each 20.00 924.92 18498.39

complete as per specification and direction of Engineer-in-charge

25mmx600mm long CP Towel rail

55 C P Towel Ring Each 15.00 636.48 9547.20

56 Supplying all materials ,labour ,T&P and fixing CP Soap Holder/

Soap Dispenser complete with CP brass brackets fixed to wooden

plugs with chromium plated brass screws etc.all complete as per Each 20.00 262.05 5241.09

specification and direction of Engineer-in-charge .

57 CP soap dispenser Each 18.00 2713.54 48843.72

58 Supplying all materials, labour, T&P and fixing of Stainless Steel

Coat Hook alongwith all necessary accessories complete including

cutting, making good the walls, floors, slab wherever complete in

all respect as per specification and direction of the Engineer in Each 17.00 342.20 5817.40

charge. (Jaquar/ Hindware/ Cera) .

Stainless Steel Coat Hook - Double (Euronics EC02)

59 Supplying all materials ,labour ,T&P and fixing Mirror of superior

glass mounted on 6mm thick A.C. sheet or ply wood sheet and

fixed to wooden plugs with chromium plated brass screws and Each 25.00 939.16 23479.05

washers etc.all complete as per specification and direction of

Engineer-in-charge.

Mirror (Bevelled edge) 600mmx450mm

60 Supplying all materials, labour, T&P and fitting and fixing G.M/

Brass fittings of the following nominal bore with supply of all

jointing materials complete as per specification and direction of Each 10.00 1168.51 11685.07

the Engineer in charge.

25mm dia Brass F.W valve (Sakti make)

61 32mm dia Brass F.W valve (Sakti make) Each 2.00 1711.44 3422.87

62 40mm dia Brass F.W valve (Sakti make) Each 4.00 2165.41 8661.62

63 40mm dia CPVC Ball valve Each 5.00 1116.34 5581.70

64 Supplying all materials, labour, T&P and providing fitting and

fixing (Aqua guard) Pure Chill 80 PSS UV of size

750x570x1350mm height with water storage capacity 80 liters

along with 2 nos of faucets 1 for cold water and 1 for normal Each 3.00 132445.56 397336.68

water including a flow of 1.5 ltr per minute etc all complete as

per approved drawing,specification and direction of the Engineer

Pure Chill 80 PSS UV Make-Aquaguard/Usha

65 Supplying all materials,labour,T&P and fixing Rotational moulded

polyethylene cylindrical vertical water storage tanks conforming to

IS : 12701--1996 including cutting holes through the tank and

fixing mild steel tubes and fittings and providing extra sockets

and jam nuts, fixing ball valve etc, including hoisting upto a

height of 5 metres above ground level and placing the tank to the

required position and providing 1st class K.B brickwork in cement

mortar (1:6) of 0.46m height in staging and in circular protection

wall to support the tank, 12mm thick cement plaster (1:6) over Each 1.00 56731.21 56731.21

brickwork, R.C.C slab of size 1.60mx1.60m and 0.10m thick,

R.C.C beam of 0.25mx0.30m and 2.60m average length in

cement concrete(1:2:4) using 12mm size h.g chips including

centering and shuttering, watering, curing, conveyance of all

materials to worksite etc all complete as per specification and

direction of the Engineer in charge.

Fixing 3000Ltr Roto-moulded water storage tanks-In

Digitally signed by JAYA

Description Unit Qty Rate Amount

66 B- External Supply & Discharge portion

Supplying all materials ,labour ,T&P and constructing gully trap

chamber of inside size 250mmx250mm with 8cm thick RCC

precast cover slab in cement concrete (1:2:4) mix using 12mm

size crusher broken HG chips, foundation concrete (1:4:8) using

40mm size crusher broken HG metal on bed and around trap, KB

brick work in cement mortar (1:6) in foundation and plinth and

inside 12mm thick cement plastering (1:3) finished with a floating

coat of neat cement including fixing 100mmx100mm size HCI

gully trap, 150mmX150mm size CI grating etc.all complete as

per drawing, specification and direction of Engineer-in-charge.

In side size 250mmx250mm

67 Supplying all materials ,labour ,T&P and constructing Inspection

Chamber of inside size 760mmx760mmx460mm with cement

concrete (1:3:6) using 40mm size crusher broken hard black

granite metal on bed , KB brick work in cement mortar (1:6) in