Renovation of Control Room ,Class IV Quarter and Generator Room at Vadiya Irrigation Scheme

It Rate In

specification and reference to Quantity Unit Amount

No figures

book of specifications)

Dismantling of RCC work viz. slab,

beam, lintel, barrel, staircase, etc.

including removing the steel from the

dismantled portion without damage

to reinforcement sorting and

stacking of useful and unuseful

material from the dismantled

material as directed etc comp.

Dismantling stone/brick masonry &

stacking of useful and unuseful

2 material from the dismantled Cum

materials as directed etc complete.

(a) in cement mortar

Removing and scraping of old

deteriorated plaster of any thickness

from wall / RCC member including

stacking of serviceable material and

disposal of unserviceable from site of

work with all lead and lift.

Providing and laiyng Brick masonary

using locally available traditional

(2nd class) bricks and cement mortar

by mass incl striking out joints,

4 curing, finishing and scaffolding etc 34.00 Cum 4877.00

In cement mortar 1:5 for all lead and

Dismentling doors, windows,

ventilators etc. (Wood or steel)

shutters including chowkhats,

5 Architraves, Holdfasts and other 46 Each 192.09

attachment etc. complete and

stacking them within all lead and

lift.(i) Not exceeding 3 Sq.M. in area

Providing & Laying in position

6 Control cement concrete using 31.00 Cum 5230.00

cement sand and crushed aggregate

by mass and machine mix for Rcc/pcc

work including necessary

formworks, centering, scaffolding

compaction by mechanical vibrator

curing as directed with all lead & lift

etc complete excluding the cost of

reinforcement For slabs and lofts

c) Concrete grade M-20 and MSA-20

Providing Cutting, Bending , binding

and fixing in position as per drawing

TMT BAR, reinforcement for R.C.C

works and anchor bars incl cost of

7 black annealed 16 to 18 BWG M.S. 2.30 M.T 76574.00

wire etc. Complete with all lead and

20 mm. Thick sand faced cement

plaster on walls up to height

meters above ground level consisting

8 of 12 mm. Thick backing coat of c.m. 555.00 Sq.mt 342.41

1:3 (1 cement : 3 sand) and 8 mm.

Thick finishing coat of c.m. 1:1 (1

cement : 1 sand) etc. complete.

Providing 15 mm. thick cement

plaster in single coat on rough

(similar) side of single or half Brick

walls for interior plastering up to

9 floor two level and finished even and 566.00 Sq.mt 195.42

smooth in :

(I) Cement mortar 1:3 (1 cement :

Applying Two coats of putty & two

coats of primer of approved brand

and manufacture on new wall surface

to give an even shade including

thoroughly brushing the surface free

from mortar dropping and other

foreign matter and sand papered

Wall painting (Two coats) with

plastic emulsion paint of approved

11 brand and manufacture on 566.00 Sq.mt 82.85

undecorated wall surface to give an

even shade including thoroughly

brushing the surface free from

mortar dropping and other foreign

matter and sand papered smooth.

Finishing wall with weather proof

exterior emulsion paint on wall

surface (Two coats) to give an

12 required shape even shade after 555.00 Sq.mt 120.26

thoroguhly brushing the surface to

remove all dirt and remains of loose

powdered materials etc. complete

providing and fixing rolling shutters

of approved make made of 80 mm

wide M.S. laths inter-locked together

through their entire length and

jointed together at the ends by end

locks mounted on specially designed 8.00

pipe shaft with bracket plates, guide

channels and arragements for inside

and outside locking with push-pull

operation including the cost of hood

cover and spring etc. complete.(A)

Shutters having width below 3.5 M.

Painting two coats (excluding

priming coat) on new steel and other

metal surface with enamel paint,

brushing, interior to give an even

shade including cleaning the surface

an even shade including cleanicn the

surface of all dirt, dust and other

foreign matter.

Dismantling tiles or stone floors laid

in mortar including stacking of

15 serviceable materials and disposal of 308.00 Sq.mt 49.12

unserviceable materials with all lead

Providing and Laying polished Kota

stone slab flooring over 20mm

(Average) thick base of cement

mortar 1:6 (1-cement : 6-coarse

sand) or L.M. 1.1.5 (1-Lime putty : 1.5

-coarse sand) laid over and jointed

with grey cement slurry mixed with

pigment to match the shade of slab

including rubbing and polishing etc.

(A) 25 mm thick

Providing and laying marble stone

slab flooring over 20 mm. (average)

base of cement mortar 1:6 (1 cement

: 6 coarse sand ) of L.M. 1:1.5 (1-Lime

17 putty:1.5-coarse sand) laid over and Sqmt

jointed with grey cement slurry

including rubbing and polishing

(A) Marble Slab 25 mm thick

Providing and laying polished kota

stone slab 25 mm thick in risers of

steps, skirting Dedo and pillars laid

on 10 mm thick cement mortar 1:3

18 (1-Cement: 3 coarse sand) and 3.00 Sqmt 1109.07

jointed with gray cement slury mixed

with pigment to match the shade of

slab including rubbing and polishing

etc. complete.

providing and laying broken china

mosaic flooring for terrace using

mm to 20 mm broken pieces of glazed

tiles to be laid over cement mortar

1:3 to plain or slope and to be

19 tempered to bring mortar creme out 146.00 Sqmt 779.70

upto surface using white cement

including rounding of junctions and

extending them upto 15 cm along the

wall,clearing with water and oxalic

acid etc. as directed.

Providing and fixing 25 mm thick

shutters for cup boards etc. including

anodised alluminium butt hinges

20 with necessary screws. 10.00 Sqmt 3179.95

(A)Indian teak wood (i) Fully

Providing and fixing window having

extruded aluminum Colour anodized

section frame main outer size

Wt. 1.094 Kg/Rmt, horizontal two

21 track member size 61.85 mm x 31.75 19.00 Sqmt 1713.70

vertical member of size 61.85 mm x

kg/mt with sliding shutters of

horizontal member size 40mm x

0.456Kg/mt), vertical member of size

0.456Kg/mt,@0.457 kg/mt with

mm thick transparent bronze colour

tinted float glass with powder coated

aluminum fittings and fixtures and

transparent silicon sealant glass

fixing to frame as per details etc

complete for window.

Providing and fixing standared

extruded of alluminium section of

size 63.50x38.10x1.95mm,

@Wt1.094Kg/Rmt with colour

anodized alluminium frame with

5mm thick transparent bronze

colour tinted float glass as details etc

complete for Fix window.

Providing and fixing standared

extruded of alluminium section of

size 63mm x 38.10mm x 1.2mm , @

Wt. 0.643 Kg/mt with colour Powder

Coated alluminium frame for

ventilation with 5 mm thick frosted

glass as details etc complete for

Ventilation

Providing, laying & fixing M.S. grill

made from 20mm dia bars fixed at

22cm c/c both ways by welding incl

24 keeping necessary opening & 28.00 Sqmt 2142.00

supports with one coat of primer &

two coat of approved anti corrosive

paint etc complete in all respect.

P & L 24"x 24" vitrified 8 mm thick

tile flooring over 20mm (average)

Base of cement mortar 1:6 (1

cement:6 coarse sand) on new

surface or fixing on existing flooring

25 by adhesive material including 115.00 Sqmt 1264.41

dismentaling of existing flooring and

jointed with color cement slurry

including finished with flush pointing

& Cleaning the surface etc. Complete

for Light shade

Providing and fixing pre-cast Rubber

Dye / steel Dye inter locking concrete

block 60mm thick with grade of

concrete M300 pnumatic

compressed / vibrated mechanically

and as per approved design

Confirming to IS 15658 :

including 35 mm Sand layer for

levelling and filling the joint

withsand in proper line and level as

per guidlines ofIRC : SP 63-2018 etc.

Providing and laying Vitrified tiles

to 10 mm thick,in skrting risers of

steps and dedo on 10 mm thick

cement plaster 1:3 (1-cement: 3-

coarses and) and jointed with white

cement slurry.

Providing and Laying ceramic tiles

mm thick in flooring treads of steps

and landing laid on a bed 12mm thick

cement mortar 1:3 ( 1 cement :

coarse sand) finishing with flush

pointing in white cement.

Providing and fixing 35 mm thick

shutters for Doors, windows and

clerestory windows including Indian

teak wood frames 10 cm x 7 cm. size

29 including anodized alluminium 22.00 sqmt 5338.30

fixtures and fastenings including

primer coat of approved quality and

two coats of oil painting etc,

complete. (ii) Fully Panelled.

Providing and fixing M.S. Fan clamps

type 1 to 16mm dia M.S. bar bent to

shape with hooked ends to R.C.C.

30 slabs curing, laying including 6.00 each 132.29

painting the exposed portion of

loops, all as per standard design

Providing and Erecting Approved

Make Ceiling Fan With Double Ball

Bearing ISI Mark With Condenser

31 230 Volt A.C. 50 Hz 1200mm Sweep 6.00 each 2311.89

Complete Having 3 Blade Aluminuim

Body And Blade SetsHaving

Ornamental Design Shanks, Canopy

Erected With Earthing ( Make Shall

Be Approved By Engineer In Charge )

Point wiring for light / Bell with 2-1.5

sq.mm & earthwire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV

grade FRLS PVC insulated

multistrand copper wires, in

following pipe of pipe to be erected

concealed in / on surface on wall /

ceiling completed with 6A modular

type switch / bell push & accessories

32 and earth continuity of following 62.00 point 407.03

type, eretcted on PVC / metalic box,

single mounting base frame covered

with textured / metalic front plate

modules erected on / in wall / ceiling

as per pipe erected, with neccessary

Lamp holder / ceiling rose / H.D.

Connector as directed.

(C) with oval conduite / pvc casing

caping double lock type Cat.III

Supplying & errecting funnel type

earthing having earth plate of

following size burrid in specially

prepared earth pit 3 mtr below

ground with 40 kg charcol and salt

with alternate layers of charcol & salt,

20mm dia G.I. pipe with Funnel with

awire mesh for watering & bricks

masonary block, C.I. cover completed

as per para 7.3 of I.S. 3043 with

neccessary length double Galvanised

33 Iron / copper earth wire no 6 SWG 1.00 each 7874.97

bolted with lug to the plate and

covered in 12 mm dia G.I. pipe 2.5 mtr

long completed connected to the

nearest switch gear with end socket

as per direction & duly tested by

earth tester confirming to ISS (as per

drawing) with following

specification.

(C) with 60x60x0.315 cms Copper

earth plate

Approved make four pole moulded

case circuite breaker having breaking

capacity ICU of 25 K.A. at 415 V,

having normal current rating upto

A to 100 A with fixed thermal &

magnatic release suitable to work on

A.C. supply 50 c/s with all internal

34 connections and complete erected in 1.00 each 4824.77

existing 16 G.M.S. housing.

- Cat. II (MCCB)

Providing and erecting ISI mark

Medium class RIGID PVC PIPES of

following size complete to be erected

on/in wall or ceiling erected with

35 necessary PVC fittings & Junction 67.00 Rmt. 67.67

boxes fixed with adhesive solution &

Clamps with following dia of pipes, in

approved manner as directed (D)

Providing And Erecting Approved

Make OVAL CONDUIT With

Necessary Fittings Fixed With

Adhesive Solution And Suitable

Clamps Erected On Wall /Ceilling Of

Following Size 2) 25 mm

Providing and erecting

XLPE(IS:7098)(I)-88 ISI armoured

cable multistrand Copper conductor

37 for 1.1 KV. to be laid on wall with 134.00 Rmt. 178.77

necessary clamps or in existing

trench / pipe of following size of

cables (A) 2 core 2.5 Sq. mm

Supplying and erecting LED indoor

fittings with LEDS of wattage

Watt to 0.5 Watt assembled on single

MCPCB, with housing used as a heat

sink shall be made of thick sheet Steel

38 conforming to IS: 513/CRCA/ 19.00 Each 295.93

aluminium die cast powder coated

and high U.V. & corrosion resistance

with diffuser with company

mark/name 160V to 270V, Power

Factor more than 0.95, THD < 15%,

CCT 3000 K to 6500K, Luminaire

efficacy> 85 lumens/watt LED LED

driver efficiency > 85% ( fitting

required LM-79 & LM-80

Certificates) (NOTE: Below

description have shown ranges of

Wattage capacity of LED fittings.The

wattage capacity between the ranges

A) tubelight with integral driver

III)18-20 watt , surge 2KV ,IP

,Conventional 4 FT.

Supplying and erecting led lamps

with following wattage capacity of

220 to 240 voltage, minimum

burning hours life, 500 V in built-

surge protection, Polycarbonate

diffuser, mounting suitable for E14

E27 / B22 lamp holders, pf >= 0.5 (A)

LED Lamps integral type, with PC

diffuser suitable LAMP holde 16-

20watt Cat- ii

Providing and fixing wash basin with

single hole for pillar tap with C.I. Or

M.S. brackets painted white including

cutting holes and making good the

same but excluding fittings : (A)

Vitreous china (ii) Flat back wash

basin 550mm x 400mm size(I) in

white colour

Providing ,laying & jointing in True

line & level UPVC pipe(SCH-40) line

including fitting of prince supreme,

Astral, finolex or equivelent or as

approved by engineer in charge .pipe

shall be fixed on the wall with the

help of clam at every 2.0 mt. c/c or

shall be consilled as directed,

including necessary fitting etc.

including testing of pipe & joints &

fixing the same with adhesive solvent

including cost of all materials.

(A) 15 mm 16.00 Rmt. 72.65

(B) 32 mm 13.00 Rmt. 119.15

42 Office Table 4.5'x2.5'x2.5' 2.00 Each 13100.00

43 Plastic Chair (neel kamal) 12 Each 925.00

44 Revolving Chair 4 Each 5500.00

45 Bad 6'x2.5' 4 Each 6500.00

Tipoi 36'x18' with 12mm Glass (Teak

Notice Board 3'x2"x2ll' Size ,Soft

board , Coated with velvet

Providing erecting fixing double

coated ISI mark Water Tank of

48 required capacity each with all 1500.00 Litre 3.95

necessary fitting & connection

etc.complete on Terrace

Excavation in all sort of strata and

formations incl. depositing the

unuseful excavated stuff as and

49 where directed incl sorting and 6.00 Cum 79.00

stacking useful materials as directed

upto lead upto 200 mt and all lift etc.

complete incl. dewatering.

Providing and laying white glazed

tiles 6mm thick in flooring treads of

steps and landing laid on a bed of

50 12mm thick cement mortar 1:3 (1- 3.00 Sq.mt 868.55

cement :3-coarse sand ) finishing

with flush pointing in

white cement.

Providing and fixing water closet

squatting Pan

(Indian type W.C. Pan) size 580mm

(Earthwork,

bed concrete, foot reste and trap to be

51 measured 3.00 Each 983.80

and paid for separately) (A) Vitreous

China.(I) Long

pattern = White colour(R&B SOR

2024-25 P. NO 170 SR NO - 26 Item

Providing and fixing screw down bib

52 following size.(A) Brass screw down 6.00 Each 186.83

bib tap polished bright. (i) 15mm

dia.(R&B SOR 2024-25 P. NO 173 SR

NO - 47 Item Code-23028A1)

Providing and fixing 100mm size P or

S trap for water closet squatting pan

including jointing the trap with the

pan and soil pipe in cement Mortar

1:1 (1-Cement : 1-Fine sand)(A)

Vitreous China. Each

Providing and fixing PVC SWR Nahni

trap IS 14735 for drain - 100 mm

diameter with jali of the following

nominal diameter of self cleansing

54 design with C.I scread down or 3.00 586.27

hinged grating Each

including the cost of cutting and

making good the walls.

Providing, Fabricating & Erecting

New Spiral Ladder for Ground Floor

To First Floor and etc inclusive of

cost of material, labour, gas cutting,

fabrication, tools, tackles, scaffolding,

55 two coats of Metal primer red oxide 1.00 75194.00

and Enamel paint & transportation

up to site of work etc. complete JOB

as per site situations, site Each

requirement, Drawing & Instruction

of Engineer in Charge.

Providing and fixing C.P.brass waste

56 for wash basin or sink. (B) 40mm dia. 3.00 89.83

Providing and fixing M.I. fisher union

57 for wash basin or sink. (B) 40mm dia. 4.00 Each 88.65

Providing and fixing chromium

plated ,bottle trap with necessary

couplings of approved quality for

wash basin.

Providing and fixing brasss crew

59 down stop tap.(B) 20mm dia. 4.00 223.81

Providing and fixing chromium

plated brass half trun flush cock of

approved quality including fixing in

pipe line etc. complete.(i) 20mm dia.

Disconnection of existing Electric

Control in Wireless

Room, Control Room and H.R. Well

for Gate Operation and

associated electrical appliances,

including panels, MCCs,

DBs, control wiring, power cables,

earthing, lighting,

auxiliaries, cable trenches, and all

related equipment; with

proper tagging, stacking of reusable

61 materials, disposal of 1.00 60000.00

unserviceable items, and making

good all disturbed

surfaces; and thereafter

refitting/reinstallation of all

serviceable electrical equipment,

cabling, and systems at

the designated location, complete in

all respects as

directed by the Engineer-in-Charge.

rate as per Quotation

attached here with

Shifting and transporting of existing

generator set

from Generator Room to a new

location approximately

200 m away, safe handling,

loading/unloading and

62 transportation using suitable lifting 1.00 24000.00

equipment; relocation and

reinstallation at the designated site

with proper alignment, reconnection

of electrical cables, earthing, fuel line,

exhaust system, and all

accessories; testing and

commissioning for satisfactory

operation, complete as directed by

the Engineer-inCharge.

Backfilling with a behind the

structures or refilling the trenches

with excavated useful material

including watering ramming,

consolidation etc complete with all

lead and lift Cum.

Prov. and Laying in position 'Nominal

Mix' cement concrete using cement,

sand and crushed aggregate by mass

and machine mix for CC work

including necessary formworks

64 centering scaffolding compaction by 4.00 3816.00

mechanical vibrator,curing as

directed with all lead & lift etc

FOR GENERAL PURPOSE

C) Concrete 1:2:4 and MSA-40 mm

Providing laying and jointing in true

line and level 110 Diameter U.P.V.C

Type B-pipe conforming to IS 13592-

1992 with one end plain and other

end socketed with rubbering & fitting

conforming to IS 14735-1999 of

approved make for drainage system

pipe line, pipe shall be jointed with

each other with rubber lubricant,

pipe shall be fixed on the wall using

PVC clamp of the size 110mm

diameter x 149mm length x 145mm

high at every 2000mm c/c or shall be

concealed as directed including

necessary fitting such a bends,shoes

etc.including testing of pipe and

jointed adhesive solvent cement,

including cost of all materials.

Photography & Videography of Work

66 as directed by 1.00 job 1000

Engineer In-charge.

Disconnection of all electrical, fuel

exhaust, cooling, and control

connections, reconnection of

electrical cables, earthing, fuel line,

67 exhaust system, and all 1.00 job 6000

accessories; testing and

commissioning for satisfactory

operation, complete as directed by

the Engineer-inCharge.

Total =

I/Weam/are willing to carry out the work at… ....................... % above/below percent(Should

be written in figures and words) of the estimated rate mentioned above. Amount of my /our

tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

In words In words

(B)For Item Rate Tender (For above INR 50 Cr.):

Item Description of Item Quantity Unit Rate Amount

No (with brief specification

and reference to book of

figures Words

specifications)