Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹38.2 LAccepted-AOC | ₹38.2 L | 1 | Accepted-AOC L1 |
| 2 | 2₹42.3 LRejected-AOC MUKALEL HOUSE KUMILY | IDUKKI | KERALA | 685501 | ₹42.3 L | 2 | Rejected-AOC L2 |
| Sl No | Description | Qty | Unit | Jomy Mathew L2 | VINOD T N L1 |
|---|---|---|---|---|---|
| 1.00Peringulam vellapara road retarring | |||||
| 1.00 | OD178197/2025-2026:Scarifying Existing road surface to a depth of 150 mm and compacting the aggregates
obtained from scarification with power roller as per direction of departmental officer
at site | 2,383.01 | sqm | 16 ₹38,128.21 | 14.42 ₹34,363.05 |
| 1.00 | 4.9:Wet Mix Macadam Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11 & 400.12 and Technical Specification Clause 406. By Mechanical Means with 1 km lead | 184.25 | cum | 3,750 ₹6.9 L | 3,379.32 ₹6.2 L |
| 1.00 | 4.1.A.2:Granular Sub-base with Well Graded Material (Table 400.1)(A) By Mix in Place Method Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. (ii) For Grading II Material | 9.35 | cum | 3,386 ₹31,659.10 | 3,051.5 ₹28,531.53 |
| 1.00 | 75.5.1.1pb:Prime Coat - Low porosity - With Packed Bitumen Rates Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per Technical Specification Clause 502 | 2,153.51 | sqm | 80 ₹1.7 L | 72.41 ₹1.6 L |
| 1.00 | 75.5.2.3pb:Tack Coat - With Packed Bitumen Rates Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specification Clause 503. | 2,153.51 | sqm | 18 ₹38,763.23 | 17 ₹36,609.72 |
| 1.01 | 75.5.5.B.2pb:Modified Penetration Macadam 75 mm thick using Bitumen S-65 - Packed Bitumen Rates Construction of penetration macadam over prepared base by providing a layer of compacted crushed coarse aggregate using chips spreader with alternate applications of bituminous binder and key aggregates and rolling with a three wheel 80-100 kN static roller to achieve the desired degree of compaction as per Technical Specification Clause 506. | 215.06 | sqm | 418 ₹89,893.41 | 377 ₹81,076.11 |
| 1.01 | 75.5.2.1pb:Tack Coat - With Packed Bitumen Rates Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.20 to 0.25 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503. | 2,204.9 | sqm | 15 ₹33,073.50 | 14.25 ₹31,419.83 |
| 1.01 | 75.5.11.1.A.2pb:Mix Seal Surfacing - Manual Means - Type A - Bitumen S-65 - Packed Bitumen Rates Providing, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.9 mm (Type-A) or 13.2 mm to 0.9 mm (Type-B) aggregates using penetration grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 kN static roller and finishing to required level and grades as per Technical Specification Clause 509 By Manual Means Type A (II) Bitumen (S-65) | 4,358.41 | sqm | 302 ₹13.2 L | 273 ₹11.9 L |
| 1.01 | OD188171/2025-2026:Supplying and fixing in position granite name board clearly engraving the letters to a granite
plate of size 60cm x 45 cm granite slab of approved shade, colour and texture laid over
20mmthick cement mortar (1 cement :4 coarse sand)including all labour , material ,
conveyances etc complete | 1 | each | 3,025 ₹3,025 | 2,726 ₹2,726 |
Tender Value
₹42.4 L
EMD Value
₹50,000
Closing Date
6 Nov 2025, 2:00 pmClosed
EXECUTIVE ENGINEER
LSGD DIVISION, JILLA PANCHAYATH, KOTTAYAM
MLA-LAC- ADS Poonjar Constituency- Sri.Sebastian Kulathunkal MLA Construction of peringalam -Vellapara Road Passing through the Ward 3, 5 Poonjar Thekkekara Grama Panchayath- General Civil Work
2025_LSGD_816869_4
16/2025-26/EE/LSGD
Open Tender
Civil Works - Roads
365 days
Kottayam
Please refer Tender documents.
7 documents required · 7 mandatory
₹2,760
₹50,000
Yes
28 Jan 2026
30 Oct 2025
7 Nov 2025
30 Oct 2025
6 Nov 2025
30 Oct 2025
Amount
Peringulam vellapara road retarring
OD178197/2025-2026:Scarifying Existing road surface to a depth of 150 mm and compacting the aggregates obtained from scarification with power roller as per direction of departmental officer at site
4.9:Wet Mix Macadam Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11 & 400.12 and Technical Specification Clause 406. By Mechanical Means with 1 km lead
4.1.A.2:Granular Sub-base with Well Graded Material (Table 400.1)(A) By Mix in Place Method Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. (ii) For Grading II Material
75.5.1.1pb:Prime Coat - Low porosity - With Packed Bitumen Rates Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per Technical Specification Clause 502
75.5.2.3pb:Tack Coat - With Packed Bitumen Rates Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specification Clause 503.
75.5.5.B.2pb:Modified Penetration Macadam 75 mm thick using Bitumen S-65 - Packed Bitumen Rates Construction of penetration macadam over prepared base by providing a layer of compacted crushed coarse aggregate using chips spreader with alternate applications of bituminous binder and key aggregates and rolling with a three wheel 80-100 kN static roller to achieve the desired degree of compaction as per Technical Specification Clause 506.
75.5.2.1pb:Tack Coat - With Packed Bitumen Rates Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.20 to 0.25 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503.
75.5.11.1.A.2pb:Mix Seal Surfacing - Manual Means - Type A - Bitumen S-65 - Packed Bitumen Rates Providing, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.9 mm (Type-A) or 13.2 mm to 0.9 mm (Type-B) aggregates using penetration grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 kN static roller and finishing to required level and grades as per Technical Specification Clause 509 By Manual Means Type A (II) Bitumen (S-65)
OD188171/2025-2026:Supplying and fixing in position granite name board clearly engraving the letters to a granite plate of size 60cm x 45 cm granite slab of approved shade, colour and texture laid over 20mmthick cement mortar (1 cement :4 coarse sand)including all labour , material , conveyances etc complete
Concrete
3.5.2:Excavation in Soil with Dozer with lead upto 100 m Excavation for roadway in soil by mechanical means including cutting and pushing the earth to site of embankment upto a distance of 100 m, including trimming bottom and side slopes in accordance with requirements of lines, grades and cross-sections.
75.8.1:Providing Plain cement concrete for road work CC 1:2:4 (1 cement: 2 fine aggregate: 4course aggregate) laid to required slope and camber in panels (@ 3 m c/c) as requiredincluding compaction, finishing and tamping etc .complete. Max. size of courseaggregate not exceeding 25mm , mixed in concrete mixer etc complete as perspecification (i) Nominal mix (1:2:4)
CULVERT ,WATER COLLECTION PIT
11.1.1.1:Excavation for Structures Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material. I. Ordinary soil (i) Upto 3 m depth
OD178196/2025-2026:Dry Rubble Masonry - Random Rubble masonry with hard stone ,in foundation and super structure including packing to compactness to lines and levels ,cost and conveyance of all materials labour charges approved drawing and relevant technical specifications.
75.8.1.1.A:Providing Plain cement concrete for wearing coat CC 1:2:4 (1 cement: 2 fine aggregate:4 course aggregate) laid to required slope as required including compaction, finishingand tamping etc .complete. Max. size of course aggregate not exceeding 25mm , mixedin concrete mixer etc complete as per specification (i) Nominal mix (1:2:4)
NEW CULVERT , EXTENSION OF CULVERT & RETAINING WALL CONSTRUCTION .
3.5.2:Excavation in Soil with Dozer with lead upto 100 m Excavation for roadway in soil by mechanical means including cutting and pushing the earth to site of embankment upto a distance of 100 m, including trimming bottom and side slopes in accordance with requirements of lines, grades and cross-sections.
11.4.1.1:Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 I. P.C.C grade M 10 (i) Nominal mix 1:3:6
11.4.2.1:Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 II. P.C.C grade M 15 (i) Nominal mix (1:2.5:5)
11.4.5:Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203V. R.C.C. grade M 25
11.8:Supplying, fitting and placingTMT bar reinforcement in foundation complete as per drawings and technical specifications Clauses 1000 and 1202
13.1.2:Providing and laying reinforced cement concrete in superstructure as per drawing and technical specifications Clauses 800, 1205.4 and 1205.5R.C.C M 25
13.3:Supplying, fitting and placing TMT bar reinforcement in superstructure complete as per drawing and technical specifications Clauses 1002,1010 and 1202
OD188001/2025-2026:Dry rubble masonry_Dry rubble masonry with hard stone in foundation and superstructure including packing to compactness to lines and levels , cost and conveyance of all materials , labourcharges etc complete as per approved drawing and relevent technical specifications
OD365106/2025-2026:Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m. ( Derived from DAR- 2.25)
75.8.1.1.A:Providing Plain cement concrete for wearing coat CC 1:2:4 (1 cement: 2 fine aggregate:4 course aggregate) laid to required slope as required including compaction, finishingand tamping etc .complete. Max. size of course aggregate not exceeding 25mm , mixedin concrete mixer etc complete as per specification (i) Nominal mix (1:2:4)
Jomy Mathew (BID ID -2430452)
Bidder Name
Jomy Mathew
VINOD T N
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1368574.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.22 MB
PRE040.pdf
Tender Documents • 0.26 MB
EPAYMENT.pdf
Tender Documents • 0.24 MB
SBD040.pdf
Tender Documents • 6.12 MB
AFFI040.pdf
Tender Documents • 0.24 MB
FOT040.pdf
Tender Documents • 0.26 MB
IPACT.pdf
Tender Documents • 0.24 MB
BOQ_1368574.xls
BOQ • 0.32 MB
Download all tender documents and submit your bid