PROVN OF THREE SHEDS AND ANCILLARIES (ELECTRICITY, WASTE AND DRAINAGE) FOR KILL WASTE MACHINE, HEAVY DUTY WASTE SHREDDER AND COMPOSITING MACHINE AT WASTE DISPOSAL SITE AND PROVN OF FALSE CEILING WINDOW/DOOR AND SANITARY FITTING UNDER GE (N) BINNAGURI

Amount

Surface dressing n.exc (not exceeding) 15cm deep and getting out in soft/loose soil complete all as specified and as directed.

Excavating in trenches, n.exc (not exceeding) 1.5m wide and n.exc 1.5m in depth; for foundation, etc or for shafts, wells, cesspits, manholes, pier holes, taking up/laying under ground electric cable etc n.exc 10 Sqm on plan and n.exc 1.5m in depth and getting out in soft/loose soil complete all as specified and as directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and as directed.

Removing excavated material (soil) exc 50m and not exc 100m depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and as directed.

M&L for PCC in cement concrete as in foundation, filling and mass concrete type D-2, 1:4:8 using 40mm graded stone aggregate complete all as specified and as directed.

M&L for brick work with fly ash bricks straight or curved on plain exc 6m mean radius built in cement mortar 1:6 complete all as specified and as directed.

M&L for 15mm (10mm + 5mm) thick rendering in cement mortar (1:4) on fair faces of brick walls or concrete surfaces in two coats mixed with water proofing compound on top layer by weight of cement or as per manufacturer instructions, finished even & fair without using extra cement complete all as specified and as directed. Note: Water proofing compound shall be measured and paid separately.

Supply only water proofing compound complete all as specified and as directed.

M&L for rendering 15 mm thick cement plaster on fair surfaces of brick work in cement mortar (1:6) finished even and fair complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of wall and applying three coats of colour wash on wall complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of putty on wall complete all as specified and as directed.

M&L for sand filling under floors including watering and consolidation complete all as specified and as directed.

M&L for Hardcore of gauge n.exc (not exceeding) 63mm, deposited, spread and leveled in layers n.exc (not exceeding) 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

M&L for 100mm thick cement concrete type B2 1:2:4 using 40mm graded stone aggregate as in floor finished the surface even and smooth without using extra cement complete all as specified and as directed

M&L for non-skid Ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.

M&L for glazed ceramic coloured tiles of size 350x250x7mm/450x350x7mm /300x450x7mm thick for work on vertical surface such as skirting, dado, set & jointed in cement slurry and pointed in white or coloured cement to match with 10mm thick rendering in CM (1:4) as backing coat of wall tiles complete all as specified and as directed.

M&L for 75 mm thick cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate in plinth protection finished fair and even without using extra cement including forming necessary joints 12 mm wide to the full depth of PCC at every 3 meters and every change of direction and filling the same with & including bitumen and sand 1:3 by weight of grade 'A' complete with and including necessary form work etc complete all as specified and as directed.

S&F 1000 ltrs capacity rotational moulded polyethylene water storage multi layer (cylindrical vertical with closed top) hoisted and fixed in positions all specified in SSR Part I complete all as specified and as directed.

S&F ball valves of 20mm bore high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe & fixed (Minimum weight 20 gms-210 gms) complete all as specified and as directed.

S&F tubes, medium grade, 15mm bore, galvanised, with all fittings and fixed complete to wall and ceilings or laid in floors complete all as specified and as directed.

S&F tubes, medium grade, 20 mm bore, galvanised, with all fittings and fixed complete to wall and ceilings or laid in floors complete all as specified and as directed.

S&F in repairs 15mm dia fancy type Bib taps, chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S&F 15 mm dia CP cast copper alloy angle cock screwed for iron pipe and fixed complete all as specified and as directed.

S&F 15mm dia fancy type long shunk concealed stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S&F 10 ltr capacity PVC flushing cistern low level white colour with inlet ball valve float and handle including brackets including PVC connection 450 mm long, PVC flush pipe of required length and connections to pipe etc complete all as specified and as directed.

S&F vitreous china squatting pan "Orissa" pattern of size 580x440mm white with integral foot rests(excluding flushing cistern and flush pipe) with 'P' or 'S" trap from or back inlet etc including connection to trap tand flushing pipe and provision of cement concrete bedding complete all as specified and as directed.

S&F vitreous China Ware Wash hand basin white, flat back of size 550 x 400 mm size including CP waste coupling, cutting for and pinning ends of brackets or erecting stand complete all as specified and as directed.

S&F vitreous china urinal bowl type flat back of size 465x355x265 mm white (minimum) with grating and union for discharge pipe (excl flushing cistern, flush pipe and waste pipe) complete all as specified and as directed.

S&F 15 mm bore pillar taps fancy type, capstan head, cast copper alloy, chromium plated, screwed down high pressure with or without lettered ‘HOT’ or ‘COLD’ long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed.

S&F PTMT towel rail 600 mm long complete all as specified and as directed.

S&F PTMT shelf fixed with & including chromium plated brass screw and wooden/plastic cleats (min weight 300gms) complete all as specified and as directed.

S&F PVC connection pipe 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.

S&F swivel shower of brass CP with shower arm 125 mm size for fixing with 15 mm bore GI pipe complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) pipes single socket in any length with rubber ring joints fixed to wall or laid in floor including packing under and hunching against the sides of the pipes with PCC (1:3:6) type C-2 with using 40 mm graded stone aggregates of sewer pipe lines complete all as specified and as directed.

S&F PVC(SWR) 110 mm bore bends any radius complete all as specified and as directed.

S&F PVC (SWR) floor trap, plain with CP grating including jointing with solvent cement outer dia 75mm including cement concrete bedding (1:2:4), type B1 complete all as specified and as directed.

S&F Rolled Mild steel work in tubular trusses, MS pipes in vertical column, purlins including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS-1161 of 1979 grade st 240 with one shop coat complete all as specified and as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F pressed steel frames for door with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc size of frame 125 X 60 mm and making good disturbed surface of wall complete all as specified and as directed.

S&F 30mm thick flush shutter, solid core construction with block board core & plywood face panels commercial type on both sides complete all as specified and directed.

S&F 35mm thick 2nd class hard wood glazed and skeleton shutter, open rebated and prepared to receive glass, gauze, etc (without sash bars) edges of framing plain, chamfered rounded, fitted with cut and mitered beads for securing glass, etc sizes of members of shutters as specified in SSR Part-I, Section 8, supplied and fitted to chowkats complete all as specified and as directed.

S&F solid PVC door frame of size 50x47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube, supplied and fixed including fixing of hold fast as per specification and drawing complete all as specified and as directed.

S&F factory made solid panel PVC moulded door shutters 28 to 30mm thick (stiles) with raised panel design with 4 mm thick moulded PVC Sheet on the front face & 4 mm plain colour PVC sheet on the back face supplying and fixing in frame at site as per specification & drawing complete all as specified and as directed.

S&F 100mm long mild steel butt hinges heavy weight, cold rolled complete all as specified and as directed.

S&F 150mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and as directed.

S&F 150 mm long aluminium anodised door handles of extruded section complete all as specified and as directed.

S&F aluminium alloy anodised sliding door bolt 250 mm long with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section complete all as specified and as directed.

S&F factory made pressed steel windows of standard size and section as shown on HQ CE Siliguri Zone Drg No CESZ/2018/TD-07, Sheet 1/3 to 3/3 with double shutter i.e glazed & wire gauged shutter including all fittings and fixture like MS hold fast, box hinges, handles, MS tower bolts, stoppers, MS guard bar/grill etc complete including one shop coat of anti corrosive zinc chrome primer complete all as specified and as directed. Notes:- (a) Rate quoted shall be deemed to be including of all fittings fixtures . (b) Glass, wire mesh, MS guard bar/grill and painting shall be measured and paid separately under relevant items of this schedule. (c) PCC (1:3:6) type C1 to be filled in chowkats frame and paid under relevant item of schedule.

All as per Item No 49 here-in-before but with single shutter of glazed/wire gauged shutter including one shop coat of anti-corrosive zinc chrome primer complete all as specified and as directed. Notes:- (a) Rate quoted shall be deemed to be including of all fittings fixtures . (b) Glass, wire mesh, MS guard bar/grill and painting shall be measured and paid separately under relevant items of this schedule. (c) PCC (1:3:6) type C1 to be filled in chowkats frame and paid under relevant item of schedule.

M&L for mild steel framed work such as grills, gratings, guard bar etc with ends of bars shouldered or riveted or for forged into spikes framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290. Gde -E- 165 complete all as specified and as directed.

M&L for preparation of new steel surfaces of any description over 10cm in width or girth not otherwise described applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and as directed.

M&L for preparation of new wooden surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of wood primer complete all as specified and as directed.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in square n.exc 0.5 Sqm in each pane complete all as specified and as directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel staples complete all as specified and as directed.

S&F 4mm thick 'E' classic designer board false ceiling with powder coated GI snap grid frame work of grid of size 600 x 600 mm complete all as specified and directed including all necessary drilling and necessary arrangement to fix items as under :- (a) 27x27x0.55 mm thick GI angle powder coated duly plugged @ 600mm centre to centre along with perimeter of wall. (b) 25x25x0.55 mm thick GI tee powder coated as main and cross runners suspended with 1.6mm dia GI wire suspenders (n.exe 1.2 mtr length) with adjustable clamps and dash true fastners plugging in RCC slab/wooden truss/A.I Runner of slopped roof placed @ 600mm centre to centre from perimeter of wall. (c) Fixing of 4mm thick AC "E" Classic designer board of approved texture and finished complete. Note:- The complete ceiling work shall be done as per manufactures instruction and as directed.

M&L for mild steel TMT bars 6mm to 10mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality complete all as specified and as directed.

M&L for mild steel bars (TMT) 8mm dia. and over up to and including 8 mm dia in stirrups, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete all as specified and as directed.

M&L for RCC type B-1, 1:2:4 (using 20mm graded stone aggregate) as in lintel beam, chajja including necessary form work complete all as specified and as directed

S&F steel rolling shutters with ball bearings, as specified including top cover anchoring rod hasp and staple and one shop coat of primer erecting in position as indicated complete with push pull or manual type thickness of laths 1.00 mm with safety lever locks mild steel with 4 lever complete all as specified and as directed.

Surface excavation n.exc (not exceeding) 30cm deep and overaging 15cm deep and getting out in soft/loose soil complete all as specified and as directed.

M&L for 75mm thick PCC (1:3:6 ) type C2 (using 40 mm graded stone aggregate) as in path/pavings finishing the surface even and smooth using extra cement including making impressions of expanded metal, whilst concrete is green complete all as specified and as directed.

M&L for chequered cement concrete tiles 300x300 x 25mm thick with grey cement and pigments, set, jointed and pointed in neat cement slurry laid over and including 20 mm thick screed bed in CM (1:6) complete all as specified and as directed.

M&L for continuous pre cast cement concrete PCC Type C1 1:3:6 (Nominal Mix) in solid block edging width equal of the width of PCC solid block laid dry on end vertically including necessary excavation returning filling and removal of surplus soil to a distance not exc 50 mtr complete all as specified and as directed.

M&L for cement concrete 1:3:6 type C2 using 40mm graded stone aggregate as in foundations and mass filling complete all as specified and as directed.

M&L for PCC 1:3:6 type C1 using 20mm graded stone aggregate as in drain coping etc with slightly chamfered or rounded angles including necessary form work if any, and finishing exposed surface even and smooth without using extra cement complete all as specified and as directed.

M&L for PCC 1:2:4 type B0 (using 20mm graded stone aggregate) as in benching for drain with slightly chamfered or rounded angles including necessary form work if any, and finishing exposed surface even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement complete all as specified and as directed.

M&L for reinforced concrete Pipes 600mm dia, class NP2 and laid & jointed complete with one collar per length of pipe complete all as specified and as directed.

M&L for formwork to sides including edges rough finished surface of concrete flat complete all as specified and as directed.

Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

M&L for Vitrified Ceramic tiles light shade 8 to 9 mm thick (square/ rectangular) polished, area of each tiles not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles as in floor and including 15mm thick screed bed or bedding layer in CM 1:6 etc complete all as specified and as directed.

M&L for granite work 18-20 mm thick table rubbed and polished as in top of kitchen slab over 15 mm thick cement screed bed cement mortar 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M&L for rounding to edge of stone, Granite slab, kota stone slab one edge, such as in steps, cooking platform and other similar work complete all as specified and as directed.

S&F powder coated aluminium window sliding type three track (one gauge and two glazed shutter) aluminium sections weighing not less than 0.55 Kg per mtr for shutter and aluminium sections weighing not less than 1.67 Kg per mtr for frame including necessary jointing cleats, glazing cleats, rubber packing, screws, handle, locking arrangement etc complete and including 4 mm thick tinted glass and stainless steel mosquito proof gauge complete all as specified and as directed.

S&F aluminum anodized louvered ventilators with glass louvers, without sash bars, of aluminium sections weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings and with suitable locking arrangements complete all as specified and as directed.

S&F powder coated glazed aluminium section for partition with one or moor rebates complete all as specified and as directed.

M & L for 12 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to alluminium frame work as in partition complete all as specified and as directed.

S&F 5.5mm thick Sheet glass, ordinary quality, fixed with existing snap beading, rubber gasket etc. area of each pane exc. 0.50 sqm complete all as specified and as directed.

S&F powder coated anodised aluminium frame (sections weighting not less than 1.40 kg/mtr) made of Square/tubular Aluminium section for door with one or more rebates jointing cleat for fixing etc and provision of aluminium door shutter (Single/Double shutter) including necessary jointing cleats glazing clips, rubber gasket aluminium anodised snap beading, screws, hold fast, Aluminium hinges 3Nos 100mm long for each shutter, floor stopper, locking arrangements handle 4 mm thick tinted glass fixed in panels complete and all as directed.

S&F vitreous china wash basin counter type, white oval shape including waste chain and plug and porcelain stopper, brackets, waste pipe & CP waste coupling complete all as specified and as directed.

Supply & fixed grating 100/75 mm dia with waste hole of PTMT (minimum weight - 40 gms) complete all as specified and as directed.

S&F POP seamless false ceiling with powder coated GI snap grid frame work complete all as specified and directed including all necessary drilling and necessary arrangement to fix items as under :- (a) Perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleevs and screws450 mm c/c intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit including ceiling section of 0.55 mm the having curled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to intermediate channel 1.6mm dia GI wire suspenders (n.exe 1.2 mtr length) with adjustable clamps and dash true fastners plugging in RCC slab/wooden truss/A.I Runner of slopped roof placed @ 600mm centre to centre from perimeter of wall. (c) Fixing of calcium silicate ceiling made out of 1800x1200 mm x8mm thick fixed to ceiling section with 25mm long self drilling and tapping screws complete. Note: The complete ceiling work shall be done as per manufactures instruction and as directed.

M&L for brick work with fly ash bricks straight or curved on plain exc 6m mean radius built in cement mortar 1:4 complete all as specified and as directed.

INTERNAL ELECTRIFICATION M&L for concealed type point wiring with 1.5 Sqmm (nominal cross-sectional area) PVC insulated unsheathed single core multi stranded copper FRLS cable working voltage 1100 volts grade conforming to IS-694 with stranded copper conductor including PVC conduit of adequate size having a wall thickness not less than 1.5 mm with all accessories (including cutting chases & making good the disturbed surface to its original specification) including 1.5 sq mm (nominal cross sectional area) PVC insulated unsheathed single core multistranded copper conductor FRLS cable as earth continuity conductor connected to main switches/DB's or common earth dolly complete all as specified and directed for the following :-

All as per item No 85 above one light point controlled by one way switch 5/6 amps complete all as specified and as directed.

All as per item No 85 above one ceiling fan/Exhaust fan point controlled by one way switch 5/6 amps complete all as specified and as directed.

All as per item No 85 above socket out let 5/6 Amps point on the independet board complete all as specified and as directed.

All as per item No 85 above socket out let 5/6 Amps point on the same board complete all as specified and as directed.

All as per item No 85 above but wiring with 2.5 Sqmm single core multistranded copper conductor for one socket out let 15/16 amps point on the independent board complete all as specified and as directed.

S&F switch piano flush type 5/6 amps single pole one way complete all as specified and as directed.

S&F socket combination 2 in 1, 5 pin, 15/6 Amps, white ivory finish flush type non shutter non inter locking type complete all as specified and as directed.

S&F of socket outlet 2 in 1, 5 Pin 5/15 Amp multipurpose 230 volt flush type complete all as specified and as directed.

S&F in switch piano flush type 15/16 Amps single pole one way complete all as specified and as directed.

S&F lamp holder, insulated body, with back plate suitable for batten/angle fittings complete all as specified and as directed.

S&F LED white glass Lamp 1x09 Watt 230V Base-22 complete all as specified and as directed.

S&F of ceiling rose, bakelite, surface type, 220/240 volts, three terminals complete all as specified and as directed.

S&F IP 20, class I, LED light 1X18 W (or nearest next higher wattage) (4feet), 5700K, wall/ surface mounted, integrated type with aluminium housing and decorative and caps with integrated high efficiency electronic driver and surge suppressor of 2KV or more, luminaire efficiency > 95 lumens/watt, power factor > 0.90, operating range - 140 to 270 V, 50 Hz fixed with 02 Nos of PVC round/ square blocks, screws etc complete with all accessories internally prewired and connecting up complete all as specified and as directed.

S & F Energy saving new generation environmental friendly long life versatile pressure die cast aluminium IP 66 security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 25 watts with pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting and GI pipe bracket made out of GI pipe medium grade 32 mm dia 1.5 mtr long bend to required shape complete all as specified and as directed.

S&F heavy duty exhaust fan 450 mm sweep MS body with antidust painting, 4 blade with heavy duty motor and double ball bearing, 1320 RPM, single phase 230/240 volts copper wounds complete with all accessories as bird guard/ louvers shutters etc including making connections with 3 core flexible multistranded copper conductor of size 0.75 Sqmm run through flexible pipe all as specified and as directed including cutting holes and making good the disturbed surfaces of walls in CM(1:4) and finishing the surface as per existing color scheme complete all as specified and as directed.

S&F Sheet metal enclosure for 4 way Distribution Boards (DB’s), double door, Triple pole & neutral with 200 amps rated bus bar, 415 Volt IP-20 protection suitable for fixing MCB"S/isolators complete all as specified and as directed.

S&F MCB, Triple pole & neutral 63 amps, 240 volts, ‘C’ curve, 10KA complete all as specified and as directed.

S&F MCB distribution boards (DBs) with sheet metal enclosure, double door, IP 43 protection, 240 Volts, 4 way, single pole and neutral, with 200 Amps rated copper bus bar (as per OEM), neutral link, earth link earthing studs, suitable for fixing MCBs, without MCBs fixed flush to wall/other surface complete all as specified and as directed.

S&F MCB, Single pole, 5 to 32 amps, 240 volts, ‘C’ curve, 10 KA all complete all as specified and as directed.

S&F MCB, single pole & neutral, 32 to 63 amps, 240 volts, ‘C’ curve, 10KA complete all as specified and as directed.

M&L for earthing complete with galvanized steel plate electrodes of size600x600x6mm thick buried directly in ground with earth pit not less than 2.25 meter deep below normal ground level with top edge of plate not less than 1.5 meter below normal ground level connected to galvanised wire 4.00 mm earth lead by means of nuts, bolts, check nuts and washers including 15 mm bore galvanized iron pipe, medium grade for protection of earth lead upto the length of 7.5 meter towards test terminal and 20 mm bore galvanized iron pipe, medium grade for watering, and providing of charcoal and common salt in alternate layers, including necessary earth work in any type of soil and including PCC pit in PCC 1:2:4 with provision of wire mesh and funnel, complete all as shown in electrical plate No 5 of SSR Part- I including testing on complete all as specified and as directed.

M&L for concealed sub-main wiring with 2 runs of 10 Sqmm along with earth wire of size of 10 sq. mm earth wire, ISI marked, FRLS, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including PVC rigid conduit (medium grade) of size not less than 25 mm with all fittings and accessories ISI marked including cutting chases for conduits & making good to walls, floors etc complete all as specified and as directed. Note : Two runs of 10 sqmm conductor for main and one run of 10 sqmm conductor as earth wire with proper colour coding including one run of PVC conduit shall be measured as one unit length. Connections of cables with MCBs or bus bar shall be done through appropriate size brass/ copper thimbles

S&F recess mounting flat panel 34 Watt LED fitting (2’x2’) for armstrong/grid ceiling, white powder coated CRCA housing complete with full window acrylic diffuser & electronic driver, high brightness SMD LEDs etc complete with all accessories internally prewired and necessary mounting arrangements, including necessary connection complete all as specified and as directed.

S&F wall mounted 4 feet LED light fittings 1 x 18/20 Watts 230 Volts white powder coated slim box type (decorative) batten made of formed CRCA with snap on installer LED lighting fixture with and including 1 x 18/20 Watt T8 single side connection retrofit LED tube with G13 lamp holders, connector block, complete with three cores twisted flexible copper conductor cable upto ceiling rose complete all as specified and as directed.

S&F ceiling fans with all accessories 230 V, 1200mm sweep BEE 5 Star rated, conforming to IS 374:1979 complete with pre wired with 3 core cable complete all as specified and as directed.

M&L for sub main wiring with 2 runs of 4.00 Sqmm (nominal cross-sectional area) PVC insulated unsheathed single core cable of working voltage 1100 volts grade with stranded copper conductor including one run of 4 Sqmm (nominal cross sectional area) PVC insulated unsheathed cable with stranded copper conductor as continuous earth wire connected to common earth dolly drawn in PVC rigid non-metalic conduit with and including taking down unserviceable sub main complete all as specified and as directed. Note: Two runs of sub main wiring cable alongwith one run of earth wire with and including PVC conduit pipe shall be measured as one unit length.

EXTERNAL WATER SUPPLY Supply and lay galvanised, "Medium Class", including fittings of 50mm bore GI pipe and fixed complete to walls and ceiling or laid in floor complete all as specified and as directed.

All as per item No 107 here-in-before but of size 25mm dia complete all as specified and as directed.

S&F Gun metal, globe Gate Valves with iron wheel head of 50mm dia bore complete will all accessories and as specified and as directed.

S&F Gun metal, globe Gate Valves with iron wheel head of 25mm dia bore complete will all accessories and as specified and as directed.

M&L for cutting existing GI pipe alteration or addition of 40/50mm dia bore for inerstion of reducer Tee complete with all accessorized complete all as specified and as directed.

M&L for construction of brick masonry valve pits of size 600 x 600 x 600 mm (internal dia) with brick work in cement mortar (1:4) including excavation and earth work, concrete work 3mm thick MS sheet cover with locking arrangement hinges and handle rendering work, painting to all steel surfaces with two coats red oxide primer complete all as specified and as directed.

EXTERNAL ELECTRIFICATION M&L for earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25m below ground level) with top edge of the earth plate not less than 1.5m below ground level, connected to GI strip of size 32 x 6mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 of SSR Part-I, connected to earth test point all as specified or indicated including excavation and connected earth work in soft/loose soil, P.C.C 1:3:6 type C-1 as in pit, 20mm dia GI pipe medium grade for watering pipe, 40mm bore GI medium grade lead protection pipe, 50mm thick R.C.C 1:2:4 type B-1 cover slab of earth pit reinforced with 8mm dia TMT bars @ 10cm C/C both ways and with handle made out of 10mm dia bars, funnel, strainer, charcoal and testing on completion complete all as specified and as directed.

Supply and lay dry river and filling for underground cable protection with a layer of 8cm deep before laying and 15cm covering above the top edge of cable after laying completion complete all as specified and as directed.

Supply and laying sub class B bricks of size 25cm x 12cm x 7.5cm (+/-10%) for protection of UG cable with width equal to length of bricks as mechanical protection laid dry and flat complete all as specified and as directed.

M&L for horizontal boring across the existing road without disturbing the road surface for inserting GI pipe complete all as specified and as directed. Notes:- (a) Removal of surplus soil shall be deemed to be included in the unit Rate. (b) GI pipe will be measured and paid separately under relevant item of Sch ‘A’.

M&L for 50mm bore steel tubing light grade ISI marked for protection of cable including necessary joints complete all as specified and as directed.

Supply and laying cable XLPE insulated screened, PVC bedded, galvanised, steel strip or wire armored, electric power cable, (heavy duty) 1100 volts grade, with stranded aluminium conductor of size 4 core 25 Sqmm complete all as specified and as directed.

All as per item No 118 above but cross sectional area 10 Sqmm 2 core.

All as per item No 118 above but cross sectional area 70 Sqmm 3.5 core.

M&L for steel tubular poles complete with cast iron base plate. Final taper plug bolts, nuts & screws as specified type 410 SP-31, 9.0 meters long including painting all external exposed steel surfaces with two coats of aluminium paints over a coat of red oxide zinc chrome primer and all internal surfaces and external surfaces in contact with concrete with coats of black bituminous paint complete all as specified and as directed.

S&F IP 66 power coated pressure die cast aluminium compact with power LED street light with heat resistant toughened glass with lence of rating 60 watt including provision of 3 core PVC insulated, sheathed, slandered copper conductor cable/flexible choed of size 2.5Sqmm for electrical connection from box to security/street light fitting complete all as specified and as directed.

ANIL ENGINEERING CO

NARAYAN MAJUMDER

L. B. SHARMA

M/S DELTA ENGINEERS & CO