Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | l1₹4.7 LAccepted-AOC | ₹4.7 L | l1 | Accepted-AOC l1 |
| 2 | Rejected-Technical | - | - | Rejected-Technical L1 |
| Sl No | Description | Qty | Unit | SHAJI M M L2 | Thannickalconstructions L1 |
|---|---|---|---|---|---|
| 1.00Building | |||||
| 1.00 | OD507054/2025-2026:Construction of table using 18 mm thick WPC (Wood Plastic Composite) with decorative lamination finish including all cost of fittings ,labour charge,conveyance etc. | 50.13 | sqm | 8,301 ₹4,16,120.83 | 8,200.63 ₹4,11,089.38 Lowest |
| 1.00 | OD507055/2025-2026:Construction of table using 8 mm thick WPC (Wood Plastic Composite) including all cost of fittings ,labour charge,conveyance etc. | 16.4 | sqm | 2,168.95 ₹35,566.44 | 2,151.45 ₹35,279.48 Lowest |
| 1.00 | 21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):
For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron) | 13.73 | kg | 682.72 ₹9,372.38 | 584.72 ₹8,027.04 Lowest |
| 1.00 | 21.2.2:Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre- laminated particle board with decorative lamination on both sides | 9.6 | sqm | 1,300.1 ₹12,480.96 | 1,192.65 ₹11,449.44 Lowest |
Tender Value
₹4.7 L
EMD Value
₹11,646
Closing Date
9 Mar 2026, 5:00 pmClosed
AE SANTHANPARA
AE SANTHANPARA
Annual Plan-SPRA-191/26-CDS Office Furnishing
2026_LSGD_841772_6
05/2025/AE/LIDANDEW/SPRA
Open Tender
Civil Works - Buildings
Item Rate
180 days
SANTHANPARA
Please refer Tender documents.
3 documents required · 3 mandatory
₹1,030
Yes
₹11,646
Yes
13 Aug 2026
2 Mar 2026
11 Mar 2026
2 Mar 2026
9 Mar 2026
2 Mar 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Building | |||||
| 1.001 | OD507054/2025-2026:Construction of table using 18 mm thick WPC (Wood Plastic Composite) with decorative lamination finish including all cost of fittings ,labour charge,conveyance etc. | 1 | sqm | - | - |
| 1.002 | OD507055/2025-2026:Construction of table using 8 mm thick WPC (Wood Plastic Composite) including all cost of fittings ,labour charge,conveyance etc. | 1 | sqm | - | - |
| 1.003 | 21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):
For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron) | 1 | kg | - | - |
| 1.004 | 21.2.2:Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre- laminated particle board with decorative lamination on both sides | 1 | sqm | - | - |
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1419899.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.05 MB
BOQ_1419899.xls
BOQ • 0.30 MB
viewsbdddd.pdf
Tender Documents • 1.65 MB
viewnitddd.pdf
Tender Documents • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .