Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹18.3 LAccepted-AOC SHAMAL BECHAR S CHAWL SIDHANATH ROAD B H KHANDERAO MARKET VADODARA 390 001 GUJARAT | VADODARA | VADODARA | GUJARAT | 390001 | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹18.8 L+₹39,769.13 (2.16%)Rejected-AOC D 47 MANORATH SOCIETY NEAR AMAR COMPLEX SAMA ROAD VADODARA 390024 | VADODARA | GUJARAT | 390024 | L2 | Rejected-AOC Being not L1 | |
| 3 | L3₹19.1 L+₹67,473.92 (3.67%)Rejected-AOC 0 BADRI ELECTRICALS NEAR SHRIGOR FALI NEAR ANADABAWA CHAKLO JAMNAGAR GUJARAT 361001 UDYAM GJ 10 0001822 | JAMNAGAR | GUJARAT | 361001 | L3 | Rejected-AOC Being not L1 |
Tender Value
Refer Docs
EMD Value
₹40,000
Closing Date
10 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Sachin Singhal EE GE Army Baroda
Opp Akashwani, Makarpura road PO-ONGC Baroda-390009
As per BOQ
2022_MES_552176_1
8694
Open Tender
Civil Works
Item Rate
180 days
GE Army Baroda
As per tender documents
5 documents required · 5 mandatory
₹500
Yes
GE Army Baroda
₹40,000
Yes
11 Nov 2022
15 Sept 2022
14 Oct 2022
15 Sept 2022
10 Oct 2022
27 Sept 2022
16 Sept 2022 - 26 Sept 2022
Amount
M&L for Preparation of old decorated surfaces, plastered or unplastered including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots and applying one coat of white wash on walls all as specified and directed
All as per item No 1 above but on ceiling.
M&L for Preparation of old decorated surfaces on walls and applying two coats of oil emulsion distemper complete all as specified and directed.
M&L for complete removal of existing treatment on walls and preparation of surfaces and applying two coat oil emulsion distemper over a coat of primer over and including 1.5mm thick wall care putty all as specified and directed.
M&L for Preparing old decorated surface of wall and applying one coat of oil emulsion distemper
M&L for preparation of old painted wooden surfaces of any description, not otherwise described, over 10 cm width of girth and applying a coat of synthetic enamel paint all as specified and directed by Engineer-in-Charge.
All as per Item No 6 above but on old steel surfaces.
M&L for preparation of old painted wooden surfaces of any description, not otherwise described, over 10 cm width of girth and applying two coat of synthetic enamel paint all as specified and directed by Engineer-in-Charge.
All as per Item No 8 above but on old steel surfaces .
Taking down cement plaster on brick/concrete surface including raking out joints hacking for key scrubbing down with water etc.
M & L for rendering 15 mm thick on fair faces of brick work or concrete surfaces of wall in cement mortar 1:6 finished even and smooth (without using extra cement)
M &L for rendering 10 mm thick on fair faces of brick work or concrete surfaces of ceiling in cement mortar 1:4 finished even and smooth (without using extra cement)
M&L preparing new plastered surfaces of wall and applying two coat oil emulsion distemper including primer over and including a coat of 1.5 mm thick wall care putty all as specified and directed
M&L for preparing new plastered surfaces of ceiling and applying three coats of white wash
Demolition of brickwork or stone/boulder masonry built in cement mortar including all quoins, arches, pillars, etc,
M & L for Brickwork with sub class ‘B’ old size bricks straight or curved on plan exc 6 m mean radius built in CM 1:6
M&L Brickwork with subclass ‘B’ old size bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4
Dismantling floor, hearth or wall tiling including cement mortar bedding and backing, removing sericeable tiles to store and rubbish off the premises
M&L for Glazed ceramic coloured tiles in vertical surface of size 300x450 X 7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick backing coat on vertical surface of wall in CM 1:4 to receive wall tiles .
M & L for Non - skid coloured Ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm , in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed for laying floor finishes in CM 1:6
M & L for Virtified Ceramic tiles 10mm thick (Square / Rectangular ) polished area of each tiles not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed for laying floor finishes in CM 1:6
M & L for Virtified Ceramic tiles 10mm thick (Square / Rectangular ) polished area of each tiles not exceeding 0.36 sqm in skirting/dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick backing coat on vertical surface of wall in CM 1:4 to receive wall tiles .
Demolition of stone slabs and tiles of any description or thickness in floors & walls, laid bedded & pointed in any mortar complete.
M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite
M & L for machine cut kota stone slab flooring 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, moulding and polishing complete including screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in C M 1:6
S&F in repairs sinks with draining board made of stainless steel 1 mm thick kitchen with plugs , washers and waste , including bedding in cement mortar on to dwarf wall or including fixing cantiliver brackets and connecting union to pipe , overall size 915mm x 460 mm & bowl size 410mmx330mm x 160mm complete all as directed by EIC
S&F in repairs stainless steel plate rack of size 880x880x220mm, 23 gauge thick all as approved and directed
Taking down and refixing in the same opening shutter of any description n.exc 1 sqm each
Taking down shutter of any description exc 1 sqm and n.exc 2 sqm each
S & F 25 mm thick, flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides and one side covered with decorative face veneer
M&L for Teak wood lipping, 3 to 6 mm thick and fixed with nail for 18/19 mm thick block board.
S & F in repairs factory made 18 (+ 0.7 mm) thick PVC sheet one sided prelaminated sheet cabinate shutters and interior. 18mm (+ 0.7 mm) thick sheet of density 600 kg/m3 bent at 90 degree and finished all edges at all level for making edges, Lipping/bending or 0.5mm thick PVC sheet lipping at ll four edges using bonding tape etc complete all as per directed.
S&F Butt hinges, medium weight, cold rolled mild steel of 100 mm size
S & F Butt hinges, medium weight, cold rolled mild steel of 75 mm size
S&F 150mm aluminium alloy handles cast type anodised all as specified
S&F 100mm aluminium alloy handles cast type anodised all as specified
S&F 150mm aluminium anodised barrel tower bolts of extruded section and fixed.
S&F 125mm aluminium anodised barrel tower bolts of extruded section and fixed.
S&F 300 mm Aluminium alloy, anodised sliding door bolt with hasp, staple (Bolt Type) and fixing , clips of sheet of extruded sections and fixing bolts.
S&F 250 mm Aluminium alloy, anodised sliding door bolt with hasp, staple (Bolt Type) and fixing , clips of sheet of extruded sections and fixing bolts.
S&F 100 mm size Hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws
S&F in repairs 4.00 mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane
S&F in repairs 4.00mm thick figured glass, pin head type and glazing with oil putty in square n exc 0.5 sqm in each pane
S&F in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples.
M&L for securing sheet glass 4.00 mm thick, ordinary quality in existing wooden frames glazed with putty/beads in square n exc 0.5 sqm in each pane including removing loose or decayed putty/beads,painting/oiling one coat on rebates, grooves, reputtying and painting /oiling puttied surface to match existing work (New length of frame reputtied shall be measured)
S&F 2nd class HW Small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary labours; articles n exc 200 cu. cm each
S & F in repairs 25mm dia stainless steel 202 grade tubular curtain rod as directed
S & F in repairs stainless steel socket fancy type with bracket for 25mm dia stainless steel tubular curtain rod (design of socket shall be approved by GE/AGE at the time of execution) as directed
S&F in repairs 15mm bore brass bib tap , chromium plated fancy type screwed for iron pipe or brass ferrule complete
S&F in repair 15 mm dia brass Pillar taps, chromium, plated fancy type fixed to iron pipe or brass ferule
S&F in repairs stop valves for 15 mm bore brass chromium plated ,fancy type with long shank concealed type fixed to iron pipe or for brass ferrule
S&F in repairs chromium plated shower rose with swivel joints including fixing to GI pipe for 125mm dia
S&F in repairs brass CP mixer for mixing hot & cold water three way screwed down for iron pipe 15mm bore and fixed complete
S&F in repairs CP Soap dish, fixed to plugs with chromium plated brass screws. Make : Prayag (Cat No BA-45) or equivalent make.
S&F in repair glass shelf (450x150mm) with chromium plated guard complete all as specified and directed.
S&F in repairs Vitreous China wash down water colset (pedestal pattern) and trap white including fixing bolts, WC seat cover of fixed with aluminium or MS chromium plated complete all as specified.
S&F in repairs PVC water closet seat cover, white colour, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device complete all as specified.
S&F in repairs for PVC low level flushing cistern, white, 10 Ltrs capacity complete with all internal accessories & fixed to wall & making good to wall surfaces incl. taking down existing flushing cistern complete.
S&F in repairs toilet jet spray made out of stainless steel flexible tube of 15 mm dia , all as specified and directed
S&F in repairs health Faucet (hand shower) made out of stainless steel flexible tube of 15 mm dia , all as specified and directed
S&F in repairs Vitreous China wash hand basin, flat back 550 x 400mm white excluding taps, waste chains and plugs and porcilain stopper but including bracket
M&L in repairs 32mm waste fittings, brass , chromium plated for glazed ware sinks, basins etc with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed.
S&F 40 mm bore low density polyethylene pipe (LDPE) of pressure rating 6 Kgs/cm2 as in waster pipe
S&F in repairs PVC connections 15mm size with PTMT nuts of length 450mm
S&F in repairs brass chromium plated tubular towel rail, 20mm dia, D-type, 60cm long between flanges as in repairs.
Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal out side MD land all as directed by Engr-in-Charge.
S&F 15mm bore galvanised mild steel tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors (concealed type) all as directed.
Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal out side MD land all as directed by Engr-in-Charge.
S&F 20mm bore galvanised mild steel tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors (concealed type) all as directed.
Refixing 20 mm bore steel tubing and connections in new or old position (Walls, Ceiling, floors, etc)
Taking up or down 25mm bore steel tubing and connections, including cleaning for refixing or removal out side MD land all as directed by Engr-in-Charge.
S&F 25mm bore galvanised mild steel tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors all as directed.
Refixing 25 mm bore steel tubing and connections in new or old position (Walls, Ceiling, floors, etc)
Disconnecting existing tanks of capacity exceeding 500 Ltr but not exceeding 1000 Ltr , setting aside (or lowering if required) and carrying out petty repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing,etc.)
Dismantling water tank of capacity 500 to 1000 ltr
S&F 1000 Ltrs Rotational moulded polyethylene water storage tanks (cylin-drical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I
S&F 500 Ltrs Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I
S&F as in repairs Ball brass valves, for 25 mm bore of pipe high pressure, with polythene float and fly- nut complate, screw-wed for iron pipe or brass ferrule and fixed
Taking down PVC/CI pipe of any pattern size including all fittings etc. and cleaning for refixing or removal outside MD land
S&F in repair 100/75 mm dia CP grating with hole or without hole fixed to existing NT/FT.
S & F in repair 75mm PVC (SWR) floor trap, plain with CP grating including jointing with solvent all as specified and as directed.
S&F 110mm dia PVC SWR pipe single socketed in any length with rubber ring joints fixed to walls
S & F in repairs 110mm dia PVC SWR bend with oval access door
M&L for weldings in repairs length exc 2.5 cm but n exc 5cm, thickness of metal to be welded exc 20mm but n exc 25mm.
M& L for Polishing /cutting to existing terrazo/kota stone flooring with filling joints including, cleaining the surface complete as specified and directed by Engr-in - charge
S & F in repairs 6mm thick Plywood, grade BWR, type BB, fixed with screws to timber frame work complete all as specified and directed
Shree Vaishno Enterprises
Badri Electricals
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .