SPECIAL REPAIR TO MES IB BLDG NO P-114 AT MIL STN VADODARA AND PROVN OF SCOOTER CUM CAR PRKING SHED FOR AGE B/R (O/L) AT OURTAM LINE UNDER GE (ARMY) BARODA

Amount

Demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15 cm thickness (below or above ground level) as in plinth protection etc.complete.

Demolition brickwork or stone/boulder masonry built in cement mortar including all quoins, arches, pillars, etc, complete.

M&L for Brickwork with sub class ‘B’ bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 complete.

M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete.

Demolition of reinforced cement concrete of Roofs, floors (other than Ground Floors) Beams, staircase, landing, chajjas, RCC water tank, pre-cast slab (manhole cover) and similar suspended work in any position complete.

Demolition of unreinforced cement concrete of any description and in any position not otherwise specifically provided for roof curb, benching etc complete.

M&L for Cement concrete (PCC) type B1 1:2:4 (20 mm graded aggregate) as in surface channels and drains complete.

M&L for Cement concrete (PCC) type B1 1:2:4 (20 mm graded aggregate) as in haunching, roof kerbs or mud stops, rounded or chamfered on edges, tank staging etc complete.

M&L for Cement concrete (PCC) type B0 1:2:4 (12.50 mm graded aggregate) as in filling hollow portion of pressed steel door frame and fixing to hold fast etc complete.

M&L for complete removal of loose / cracked concrete incl reinforcement if required, from RCC roof projection, chajja, fins, facia etc and making good with PCC (1:11/2; :3) type A0 (using 12.5 mm graded stone aggregate) in any slab and in any position finished the surface even and smooth with out using extra cement including necessary form work, necessay reinforcement if required including necessay welding/binding of reinforcement if required, including a coat of Epoxy Bonding agent of Dr Fixit/FOSROC/PIDILITE to old Concrete/Cement surface complete.

M&L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete.

M&L for 75 mm thick PCC 1:3:6 mix type C2 using 40mm graded stone aggregate as in plinth protection and paving finishing cone surface even and smooth without using extra cement complete.

M&L for Forming Contraction (Dummy) joints 65mm deep x 10mm wide at every 3m interval and filled with sealing compound Grade 'A' complete.

Demolition of stone slabs and tiles of any description or thickness in floors & wall, laid bedded & pointed in any mortar.

M&L for Vitrified tiles 10 mm thick (square/ rectangular) dark shed polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15 mm thick for laying floor finishes with C M 1:6 complete.

M&L for Vitrified tiles 10 mm thick (square/ rectangular) dark shed polished, area of each tiles not exceeding 0.36 sqm, in vertical surfaces etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including backing coat 10 mm thick in CM 1:4 complete.

M&L for non skid colour ceramic tile 7 to 8 mm thick joint free area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or colour cement to match including screed bed or bedding layer of mortar 15 mm thick for laying floor finishes with C M 1:6 complete

M&L for Glazed colour ceramic walls tiles in vertical surfaces of size 300 x 450mm, 6 to 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including rendering backing coat on vertical surface of wall in 10mm thick CM 1:4 to receive wall tiles complete.

M&L for 16 to 18 mm thick green marble (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking plateform and like including cement mortar 1:4 (10mm thick) and pointing in white cement (1:2) using marble dust with admixture of pigments to match with shade green marble complete.

M&L for 16 to 18 mm thick green marble flooring over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slabe including rubbing, moulding and polishing complete including screed bed or bedding layer of mortar 15mm thick for laying floor finishes with cm 1:6 complete.

M&L for Polishing/rubbing to existing terrazo / marble stone flooring with filling joints including, cleaning the surface complete.

S&F in repairs GI frame work for seamless ceiling with size of grid 605 x 605mm comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm center to centre including hangers 6 mm dia GI (upto 1200 length) adjusting level fiexed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia, 40 mm long complete.

Providing and fixing Gypsum Board 12 mm thick in ceiling fixed with screw as per manufacturers instructions complete.

Providing and fixing Gypsum wall cornices in any decorative shape .

S&F MS Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete.

M&L for necessary welding in repairs to steel surface not exc 6 mm th and area n.exc 2.5 Cm in length

Taking down cement plaster on brick/concrete surface including racking out joints hacking for key scrubbing down with water etc. Complete.

M&L for Rendering 10 mm thick on fair faces of brick work or concrete surfaces of Internal wall in CM 1:6 for finished even and smooth (without using extra cement) complete.

M&L Rendering in two layer on fair faces of brick work or concrete surfaces of External wall 5 mm thick in CM 1:4 mixed with WPC @ 3% by wt of cement for finished even and smooth without using extra cement over 10 mm thick rendering in CM 1:6 (WPC will be measured and paid separately) complete.

M&L for rendering or plastering for work in isolated widths or in width not forming part of general plastering such as in bands, sunk panels cornices skiring drip moulds and similar work exc 15 cm but n. Exc 30 cm in width or girth including cutting to edges complete

M&L for Rendering 10 mm thick on fair faces of brick work or concrete surfaces of ceiling in CM 1:4 for finished even and smooth (without using extra cement) complete

Supply only Internal water proofing compound complete

Taking down chowkats or frame with shutter (without taking off shutter from the frame) n.exc 1.5sqm each complete

Taking down chowkats or frame with shutter (without taking off shutter from the frame) Exc 1.5 Sqm but n.exc 4.00 Sqm each complete

Taking down shutter of any description exc 1 Sqm and n.exc 2 Sqm each complete

Refixing of door shutter exc. 1 Sqm and n.exc. 2 Sqm each in same opening complete.

S&F for pressed steel doors frame with one or more rebates size of frame 125 x 60 mm including necessary fixing lugs, stainless steel hinges, lock strike plate, etc., complete. Note :- Filling of hollow of frame with plain cement concrete and stainless steel hinges of 100 mm size will be measured and paid saperately under respective items complete.

S&F for pressed steel doors frame with one or more rebates size of frame 105 x 60 mm including necessary fixing lugs, stainless steel hinges, lock strike plate, etc., complete. Note :- Filling of hollow of frame with plain cement concrete anstainless steel hinges of 100 mm size will be measured and paid saperately under respective items.

M&L for 35mm thick Flush shutters factory made, solid core construction, with block board core and plywood face panels, comercial type 1.0mm thick (veneered on both side) with decorative choice laminated type 1 (factory laminated), or surface finish, 6mm thick or external teak wood lipping fixed with nails, color and pattern as approved complete.

S&F Factory made 35mm thick 2nd class Hard wood Glazed and Skelton shutters, open rebated and prepared to receive glass, gauze etc(without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc, sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.20(a) and fitted to chowkats complete.

S&F 200mm long aluminium anodised barrel tower bolts of extruded section and fixed complete

S&F Powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

S&F Powder coated aluminium window/ventilator shutters, side hung/sliding type aluminium sections including necessary joining cleats, sash bars, glazing clips rubber neoprene packing, anodised aluminium snap beading, screws etc as per manufactures instruction & trade practice complete.

S&F 4.00mm thick figured glass, pin head type and glazing with rubber beading or with glazing clips, complete.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.56mm and fixed with stainless steel wire staples complete.

M&L for 100mm butt hinges of stainless steel grade 202, 14 gauge thickness, medium weight of approved make fixed with pressed steel door frame/PVC door frame with screw complete.

S&F Butt hinges 75mm size, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete

S&F 300 mm Aluminium alloy, anodised sliding door bolt with hasp, staple (Bolt Type) and fixing, clips of sheet of extruded sections and fixing bolts complete.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, fixed in opening as per specification and drawing. The door frame shall be tied to the wall using 75/100mm long MS screw complete.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails. M S tube for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail, panelling of both side Prelam PVC sheet , stile and rails feathered at edgeS&Fixing in the frame complete.

S&F 125 mm aluminium alloy handles, cast type anodised complete.

S&F150mm aluminium anodised barrel tower bolts of extruded section and fixed complete.

S&F150mm aluminium alloy handles extruded fabricated type anodised complete

Providing and fixing factory made 18(+0.7mm) thick PVC sheet one sided pre laminated sheet cabinet shutter. 18 mm(+0.7mm) thk sheet shutter of density 600 kg/m3 bent at 90o and finished all edges at all level for making edges, Lipping/bending or 0.5 mm thk PVC sheet lipping at all four edges using bonding tape etc complete all as per Manufacturers's speciifcations.

M&L for preparing new steel surface of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrom primer complete.

M&L for preparing new wooden surface of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete.

M&L for complete removal of existing treatment of old painted steel surface of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint after preparation of surfaces to match the existing surfaces.

M&L for complete removal of existing treatment of old painted wooden surface of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint after preparation of surfaces to match the existing surfaces.

S&F in repairs 25mm dia stainless steel 202 grade tubular curtain rod complete

S&F in repairs stainless steel socket fancy type with bracket for 25mm dia stainless steel tubular curtain rod (design of socket shall be as approved) complete.

S&F in repairs 60cm long CP Brass 20mm dia tubular towel rail with flanged. Ends) complete.

S&F in repairs C.P grating (square trap) of size 150 x 150 mm) complete. Make : Prayag Cat No FT-45 M or equivalent

S&F in repairs PVC flushing cistren low level, 10 ltr capacity with syphonic action type ball valve. Incl inlet ball valve, PVC band 32mm complete. Make Cera/Commander

S&F in repair vitreous china Wash hand basin, white , flat back size 550 x 400 mm except taps but incl brackets, Cp waste coupling ) complete.. Make cera/Hindware

S&F in repairs CP Centre hole Wash Basin mixer three in One 15 mm bore pipe complete. Make jaquar Cat part No QQT-7167B or equivelent make.

S&F in repairs PVC (SWR) Floor/gully trap of size 125/110mm setting and jointing with solvent cement complete..

S&F in repairs 15 mm bore CP stop cock / Angle cook cast copper alloy, fency type screwed down high pressure with capston head screwed for iron pipe complete.

S&F in repairs CP bib tap fancy type 15 mm bore cast copper alloy with round operating knob screw down screwed for iron pipe complete.

S&F in repair CP wall mixer three in one system for mixing hot and cold water for kithen sink, screwed down for iron pipe 15 mm bore and fixed complete. Make Jaquar Cat part No QQT-7219 or equivelent make.

S&F in repair Toilet Paper holder of chromium plated fixed to all with chromium brass screw complete. Make Jaquar Cat part No AHS-1553 or equivelent make.

S&F in repair of chromium plated Health faucet 15mm dia 1 mtr long tube acrylic type complete. Make Jaquar Cat part No ALD-573 or equivelent make.

S&F in repair of sheet glass self assembly consisting of 5.5 mm thick sheet glass self 12 cm wide with chromium plated bracket guard and railing 60 cm long complete. Make Jaquar Cat part No ACN-1171N or equivelent make.

S&F in repair 15 mm bore MS chromium plated shower rose of size 200 x 200 mm square shape heavy grade with arms and accessories complete. Make : Jaguar Cat No OHS-CHR- 1619 or equivalant make.

S&F in repair 15 mm bore MS chromium plated shower rose of size 125 mm heavy grade with accessories completed.

S&F in repair CP Towel rack brass chromuim plated. Make Jaquar Cat part No ACN-1181N or equivelent make.

S&F in repair CP Towel rail brass chromuim plated all as specified.

S&F in repairs Chromium plated soap dish heavy duty fixed with brass screw complete.

S&F repairs vitrous china wash down water closet pan (pedestal pettern) white including white plastic water closet seat cover and back with flat bottum and cover mild steel chromium plated are aluminium anodised hinging device (excluding flushing cistern and flush pipe) but including fixing bolt and necessary connection with existing pipes complete. Make : Hindware/Cera

M&L for Cutting chases for concealed pipe where required and pointing in CM 1:3 etc in brick wall for bore of pipe 15/20 mm complete.

Taking down steel tubing and connection including cleaning for refixing the same in new or old position of size 15 mm to 25 mm dia of pipe .

S&F 16 mm dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete

S&F 20 mm dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete

S&F 25 mm dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete

M&L 25mm thick cement concrete 1:2:4 type B-0 using 12.5 mm gradded crushed stone aggregate surface for laying floor tiles as leveling course complete.

Taking down soil waste and vent pipe (any size or pattern) including all fittings complete.

M&L for PVC (SWR) pipes, 75mm bore, single socketed pipe in any length with rubber ring joints laid in floor or trenches/wall fixed complete

M&L for PVC (SWR) bends without access door suitable for 75mm Bore pipe fixed complete.

M&L for PVC (SWR) pipes, 110 mm bore, single socketed pipe in any length with rubber ring joints laid in floor or trenches/wall fixed complete

M&L for PVC (SWR) bends without access door suitable for 110/75 mm mm bore pipe fixed complete.

M&L for PVC (SWR) bends with access door suitable for 110/75 mm mm bore pipe fixed complete.

S&F in repair PVC connection 15mm bore with PTMT nut of length 450mm complete.

S&F in repairs 500 Ltrs Rotational moulded polyethylene water storage tanks (cylin-drical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete

Disconnecting existing tanks of 500 ltrs to 1000 ltrs capacity, setting aside (or lowering if required) for repairs cleaning etc and hoisting if required reconnecting and re fixing in position. Cleaning and removing of all scale and dirt etc from tanks and from mouths of circulating pipes etc. complete.

S&F in repairs Ball brass valves, for 25 mm bore of pipe high pressure, with polythene float and fly- nut complate, screw-wed for iron pipe or brass ferrule and fixed complete.

Taking down CI pipe of any pattern size including all fittings etc. complete.

S&F 100 mm bore centrefugally cast iron soil, waste and vent pipes in any length with or without ears with cement joints, laid in trenches or in floors complete.

S&F 100mm bore centrefugally cast iron soil, waste and vent pipes in any length with or without ears with cement joints, fixed to walls complete.

S&F 75mm bore centrefugally cast iron soil, waste, vent pipes in any length with or without ears with cement joints, fixed to walls complete.

S&F 75mm bore centrefugally cast iron soil, waste, vent pipes in any length with or without ears with cement joints, laid in trenches or in floors complete.

S&F 100 mm bore Branch piece, double (equel or unequel or inveted) (spigot or socket type or with parallel branches complete. .

S&F 100mm bore cast iron bends diminishing pieces or tapers (large bore measured) complete.

S&F 75 mm bore cast iron bends diminishing pieces or tapers (large bore measured) complete.

S&F 75mm bore cast iron bends diminishing pieces or tapers (large bore measured) with oval access doors complete.

S&F 100 mm bore cast iron bends diminishing pieces or tapers (large bore measured) complete.

M&L for Salt-Glazed stoneware drain pipes of 150 mm internal dia laid in treanches and jointed complete.

S&F 100mm bore branch pieces, single (equal or ;unequal) ordinary or inverted (spigot or socket type) or with parallel branches with access door complete.

S&F 75mm bore branch pieces, single (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches with access door complete.

S&F 100mm CI vent cowl complete.

M&L for complete removal of existing water proofing treatment including plaster and concrete padding, roughening of concrete surface, cleaning and washing down the surface with water and removing debris/rubbish out side MD land complete

M&L for 50 mm avg thick PCC padding in cement concrete type B0 (1:2:4) using 12.5 mm graded stone aggr finished surface even and smooth without using extra cement for laying of WPT complete.

M&L for 10 mm thick plaster on roof surface with CM 1:3 mixed with water proofing compound @3% by weight of cement plaster surface should be even and smooth without using extra cement complete. Note . (WPC will be measured and paid separately).

M&L for water Proofing treatment to roof slabs by applying one coat of bituminious/polymerized primer confirming to IS-3384 @ 0.30 Ltrs / Sqm, and laying actetic polypropylene (APP) modified membrane pre fabricated , reinforced with non woven polyester, of minium 3.50 Kg / Sqm 3 mm thick (minimum) with minium 75 mm side overlaps and minium 100 mm end overlaps and applying one coat of aluminium paint @ 0.11 Kg / Sqm over APP membrane complete.

M&L preparing new plastered surfaces of wall and applying two coats of oil emulsion distamper over a coat of primer over wall care putty complete. (Putty shall be measured and paid separately).

M&L preparing new/old plastered surfaces of wall and applying 1 to 2 mm thick layer of Birla/J K Wall care Putty complete. .

M&L for complete removal of old existing treatment white wash, colour wash etc. and applying two coats of oil emulsion distamper over a coat of primer over a coat of primer complete.

M&L for preparation of newly plastered surfaces of wall / ceiling or exposed surface of cement concrete and applying two coats of Weather proof Exterior paint acrylic finish over a coat of alkali resitant primer complete. (Make : Appex of Asian paint or equivalent of J&N/ Berger/Narolac)

M&L for complete removal of old existing treatment completely by scrapping and or rubbing of walls / ceilings of roof projection and chajjas etc. and applying two coats of Weather proof Exterior paint acrylic finish over a coat of alkali resitant primer complete. (Make : Appex of Asian paint or equivalent of J&N/ Berger/Narolac)

M&L preparing new plastered surfaces of ceiling and applying three coats of white wash on ceiling complete.

M&L preparing old plastered surfaces of ceiling and applying one coat of white wash on ceiling complete.

M&L for 5.5mm thick sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane complete.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. (inner girth only measured) complete.

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete complete.

Surface excavation n.exc (not exceeding) 30cm deep and averaging 15cm deep and getting out in soft/loose soil

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. and getting out soft/loose soil complete.

M&L for cement concrete 1:4:8, type D2 (using 40 mm graded aggregate) in foundations, filling and mass concrete complete.

M&L for 100mm thick PCC (1:4:8), type D-2 with using 40mm graded stone aggregate as in sub base/ sub base flooring etc complete.

M&L for 80mm thick coloured machine pressed rubber moulded (comprising red & yellow colour) precast conctete interlocking paver block in approved design/colour any shape and size fixed with grey cement and pigment set and laid over 25mm thick coarse sand and confirming to IS 15658-2006 of M-40 Grade (Sand filling paid seperetally) complete.

M&L for sand filling under floor or in foundations including watering and consolidation complete.

M&L for mild steel work confirming to Fe-290 Gde E-165 in angle iron posts & struts in fencing including cutting top to shape as directed, drilling holes, noteching for wire , etc. and including flat iron filletes for securing wire mesh or fence etc. including all necessary bolting riviting etc complete.

S&F galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with L-type or J-type or cranked hook bolts in lieu of screws, in roofs, walls etc. with grade of zinc coating 275., fixed with self tapping screws complete.

Returning filling including spreading, leveling, watering and wel ramming in layers n. exc. 15cm with soil obtained from excavation.

M&L for preparation of new plastered surface of wall and applying three coats of white wash complete.

Taking down existing UNSV copper/aluminium point wiring (light, fan, socket or power) including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete.

Dismantling and taking out submain wiring 2/3/4/6/10 wire of any size and taking out from site complete.

M&L concealed (modular/normal any type) point wiring complete with 1.5 Sqmm single core multistranded copper conductor PVC insulated and unsheathed FRLS cable 1100 volts grade drawn through and including non metallic rigid PVC conduit, medium grade minimum 19mm dia ISI marked and conduit accessories fixed through/on wall/ceiling /roof etc with sunken type pressed steel/welded MS terminal boxes made out of 1.2 mm MS sheet, 3mm thick laminated sheath top cover for mounting of fittings, switches, sockets outlets, regulators etc complete including provisining of 1.5 sqmm PVC insulated unsheathed FRLS cable 1100 volt grade with multi stranded copper conductor to common earth and connected to earth dolly complete for : One light/fan/bell point controlled by one switch 6Amps one waythe following :-

All as described above but for One 3 pin switch socket combination 6Amps on the independent board.

All as described above but for One 3 pin socket outlet on same board with other switches.

All as described above but point wiring with 2.5 sqmm single core multi stranded copper conductor PVC insulated & unsheathed cable 1100 volt grade and 2.5 sqmm PVC insulated and unsheathed cable 1100 volt grade with multi stranded copper conductor for earth wire for 15/16 amp multi purpose socket combination point on independent board.

S&F in repairs MCBs DB TPN 4 way factory made IP 42 protection class metal double door with 200 Amp rating bus bar 240/430V complete. Make: Legrand/Schneider/L&T

S&F in repairs MCB TPN 4pole 63 Amps 240/415 Volts 10 KA finger proof terminal, bi-connect termination, label holder, 35 mm² terminal capacity, insulated sliding shutter, large two position dolly, ISI marked to be fixed on DB complete. Make: Legrand / Schneider / L&T (DB will be measured and paid separately under respective items of sch A)

S&F in replacement under repair MCB DB 8 way factory made IP 42 protection class metal double door with 200 Amp rating bus bar 240/430V for fixing of MCBs / Isolators / RCCBs etc complete. Make: Legrand / Schneider / L&T

S&F in repairs MCBs SP 5 to 40 Amps, 240/415 Volts 10 KA finger proof terminal, bi-connect termination, label holder, 35 mm² terminal capacity, insulated sliding shutter, large two position dolly, ISI marked to be fixed on DB complete. Make: Legrand/Schneider/L&T (DB will be measured and paid separately under respective items of sch A):-

All as described above but for MCB SPN 5 to 40 Amps

M&L MODULAR switch 1 way 6Amps, 1 module complete.

S&F Switch piano flush type single pole, one way 6amp complete.

M&L MODULAR socket outlet 6Amps - 2/3 pin combined 2 module complete.

M&L switch socket combination 5 pin 6 amp complete.

M&L Socket 6A/16A - 2/3 pin combined 2 module complete.

M&L Modular switch 1 way 16A, 1 module complete.

S&F MODULAR electronic type fan step regulator, 120W - 2 module complete.

S&F fan regulator electronic type equivalent code No 38660 of Anchor make

S&F MODULAR white or Ivory cover plate with frame, 2 module complete.

S&F MODULAR white or Ivory cover plate with frame, 3 module complete.

S&F MODULAR white or Ivory cover plate with frame, 4 module complete.

S&F MODULAR white or Ivory cover plate with frame, 8 module complete.

S&F Metal Flush box 1/2 module complete.

S&F Metal Flush box 3/4 module complete.

S&F Metal Flush box 8/12 module complete.

S&F ceiling rose 65x17mm three terminals 3 phase / PVC / polycarbonate, isolated body complete.

S&F lamp holder, PVC/Polycarbonate type and back plate suitable for batten fitting.Make: Anchor/Philips/ SSK alongwith 9watt LED lamp complete.of Make: Philips/Wipro/CG

M&L modular flush type bell push button 6 amp complete.

M&L Electronic bell ding dng AC 230V single pole .make anchor / Cona / philips complete.

M&L for Sub main wiring with FRLS two single core PVC insulated and unsheathed fire retardant multi stranded copper conductor cable 1100 volt grade IS-694, marked of 6.0 Sqmm size drawn through and including not less than 25 mm dia PVC conduit medium grade ISI marked and conduit junction boxes, terminal boxes and accessories such as tees, bends, elbows, reducers, bell mouth tube ends fixed to the surface of wall/ceiling including two run of 6.0 sqmm PVC insulated and unsheathed FRLS multi stranded copper conductor cable for earth wire continuity conductor complete. NOTE : Two runs of single core 6.0 sqmm and one run of 6.0 sqmm copper FRLS cable as earth continuity conductor and suitable size conduit with accessories shall be measured as one length.

M&L for Sub main wiring with FRLS two single core PVC insulated and unsheathed fire retardant multi stranded copper conductor cable 1100 volt grade IS-694, marked of 4.0 Sqmm size drawn through and including not less than 25 mm dia PVC conduit medium grade ISI marked and conduit junction boxes, terminal boxes and accessories such as tees, bends, elbows, reducers, bell mouth tube ends fixed to the surface of wall/ceiling including one run of 4.0 sqmm PVC insulated and unsheathed FRLS multi stranded copper conductor cable for earth wire continuity conductor complete. NOTE : Two runs of single core 4.0 sqmm and one run of 4.0 sqmm copper FRLS cable as earth continuity conductor and suitable size conduit with accessories shall be measured as one length.

S&F in repairs Sheet Metal Enclosure with socket plug top and MCBs double pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 240V, 20 Amps complete.

Supply, Fixing, Testing & Commisioning of of 2' 10W Mirror LED Batten with system lumen output of 1000 lumens. System Efficacy should be > 85lm/ W. The Luminaire Should have Cool Daylight Color temp of 6500K & CRI>80.Life 40K burning hrs with 70% lumen maintenace. PF>0.95 Housing of luminaire should made of die cast alumunium & mounting on two PVC square boxes of size not less than 75mm X 75mm complete including connecting fitting with not less tha 0.5 sqmm 3 core flexible stranded copper conductor wire upto ceiling rose complete. Make- Philips/Havells/Wipro

Supply, Fixing, Testing and commissioning of 4' LED 1X18W LED Batten with system lumen output of minimum 2000 lumens . The Luminaire should have Cool Daylight Color temp of 6500K CRI>80, Life 40,000 burning hours with 70% lumen maintenance. PF> 0.95 Surge Protection of >2KV.All the Photometrical & Electrical parameters must be supported by LM79-08 and LM 80-08 test report from NABL Accredited LAB OR UL Switching cycle of 50,000 times, Lamp starting time is not more than 1 Sec. Housing of Batten should be made from Single piece powder coated CRCA sheet steel complete. Similar to Philips TMC501 LED. Make : Philips/Wipro/Havells

Supply, testing and commissioning a low glare, hight effeciency recessed mounted LED downlighter luminaire, Type : LED down light, Sub type : Green LED Square, Model No : BBS175, Lumen output not less than 850lm, Emitting colour : White, CRI>70, Colour Temperature: 5700K, Average life : 40000hrs, systen Power consumption not more than 15W,Operating Voltage 170V-270V AC, Frequency : 50-60Hz, PF>0.9, LED Driver : Non-Integrated constant current electronic driver with gear tray, Optics High quality diffuser, Housing : Polysulfone, Material Heat sink: die-cast Diffuser: PMMA Reflector: PC Clip: steel, Ring Color White (RAL9010), Installation Spring Clip, SDCM 5 complete. Make: Philips /Havells/Wipro

S&F in repairs wall security light LED type with GI bend 1.2 mtr and fixing on wall/pole with clamp, nut & bolt complete. CAT Part No.LSTO-25-CDL 25watt of Make CG or its equivalent in Phillips/Wipro.

Taking down and refixing Exhaust fan 225 mm sweep AC,240 volts, metal body in same location after cleaning, greasing and painting with synthetic enamal paint by spraying including filling cavities with filler, one coat after cleaning all dusts etc and connecting up including provision of flexible wire from ceiling rose / connector to fan complete.

Taking down and refixing Exhaust fan 300 mm sweep AC,240 volts, metal body in same location after cleaning, greasing and painting with synthetic enamal paint by spraying including filling cavities with filler, one coat after cleaning all dusts etc and connecting up including provision of flexible wire from ceiling rose / connector to fan complete.

M&L for in repairs Rigid non-metallic PVC conduit exclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc for LAN and TV Socket complete.

M&L for PVC Junction boxes (1 to 4 way) complete.

S&F PVC insulated overall PVC sheathed twin core 1 pair of size 0.51mm as per ITD specification cable with copper conductor suitable for telephone drawn through conduit complete.

S&F PVC insulated overall PVC sheathed cable with copper conductor of size RG-8 suitable for cable TV connection drawn through conduit complete.

S&F RJ11 telephone outlet with shutter similar to Schneider cat Part No P4011_DG complete.

S&F TV socket similar to Schneider cat Part No P4500_DG complete.

M&L for Earthing as per electrical plate NO.3 of MES SSR Part I 2009 with galvanised steel plate earth electrode 600 mm x 600mm x 6 mm burried directly in ground in a pit of depth not less than 2.25 metre below ground level with the top edge of earth plate at a depth not less than 1.5 m below normal ground level connected to and incl galvanised iron or steel earth lead wire 4 mm dia by mneans of bolts, nuts, check nuts and washers of galvanised iron or steel earthing wire protected by galvanised iron or steel pipe 15 mm dia light grade and connected to main switch board or main control board watering pipe shall be 20 mm dia GI medium grade incl excavation and earth work in any type of soil, PCC pit, CI Frame, RCC covers complete.

M/S Badri Electicals

LAXMI CORPORATION

Gayatri Associates

CENTAUR ENGINEERS

OM Engineering

Shiv Projects

Nirmal Constructions