Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.8 LAccepted-AOC | L1 | Accepted-AOC LOWEST AMOUNT QUATED | |
| 2 | L2₹1.8 L+₹1,685.86 (0.93%)Rejected-AOC | L2 | Rejected-AOC HIGHEST AMOUNT QUTED |
Tender Value
₹1.7 L
EMD Value
₹4,218
Closing Date
11 Dec 2024, 6:00 pmClosed
SINI MON CH
Office of the Assistant Engineer, LID EW Section, Edappatta Grama Panchayat
68/25 Karuvatta Anganwadi Building Renovation Ward 8
2024_LSGD_711204_4
TN/AE/LSGD/EDP/1/2024-25
Open Tender
Civil Works - Buildings
Item Rate
180 days
Edappatta Grama Panchayat GP
Please refer Tender documents.
7 documents required · 7 mandatory
₹555
Yes
₹4,218
Yes
7 Apr 2025
3 Dec 2024
13 Dec 2024
3 Dec 2024
11 Dec 2024
3 Dec 2024
Amount
KARUVARATTA ANGANVADI MAINTENANCE WORK
11.38:Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of Ist quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 Coarse sand), including pointing the joints with white cement and matching pigments etc., complete.
50.12.4.2:Providing and fixing false ceiling with 7.5 mm thick PVC wooden grains panel board ceiling of approved quality in aluminium frame work with necessary screws etc complete ( aluminium frame work shall be paid separately)
21.1.1.1:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionAnodised aluminium (anodised transparent or dyed to required shade according to IS : 1868, Minimum anodic coating of grade AC 15)
2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil
4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)
OD134999/2024-2025:Providing and fixing precoated galvanised iron profile sheets (size, shapes and pitch of corrugation as approved by Engineer in charge)0.35 mm(+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade ,5-7 micrones epoxy primer on both side of the sheet and polyester top coat 15- 18 micrones .Sheet should have protective guard film of 25 micrones minimum to avoid scratches during transportation and should be supplied in single length up to 12 m or as desired by Engineer in charge. The sheet shall be fixed using self drilling / self tapping screws of size (5.5x55 mm)with EPDM seal, complete up to any pitch in horizontal / vertical or curved surfaces, excluding the cost of purlins rafters and trusses and including cutting to size and shape wherever required. Details for cost for 216.14 sqm(External dimension of plinth) Area of roof 20.2x10.70 m=216.14 sqm Sheets used=20 nosx10.70 mx 1.06m=226.84sqm add 3% wastage=6.81 Total=233.65 sqm
10.25.2:Item Shifted to Sub head 14 as item 14.73 Item Shifted to head 14 as item 14.74 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
OD134998/2024-2025:Providing and fixing 150 mm wide , square cut PVC 4kgf/cm2 rain water gutter pipe with iron brackets with 25x5 mm size flat, screws and washers etc, including making necessary connections with rain water pipes etc complete. Details for cost for 10 M
13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work
T.K Construction (BID ID -2011047)
Bidder Name
T.K Construction
MUHAMMED RAFI
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1118517.pdf
boq_comp_chart.xlsx
xlsx
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .