REPAIR MAINT OF CERTAIN HIGHER SIDE MACHINERIES EQUIPMENT OF CENTRAL AC PLANT AND CONNECTED WORKS AT NAVAL BASE KOCHI

Amount

Material and labour for opening body cover and dismantling of VOLTAS Make compressor model 5 H 40, for repairing/ maint and cleaning / servicing the serviceable parts ,replacing gaskets,replacement of shaftseals,suction valeve reeds,dowety rings, O rings,piston rings ,suction / discharge reeds , oil scraper, rings springs and including remetalling,grinding and polishing of shaft/piston rods etc if found defective and ressembling, testing for proper functioning including proper alignment with primover complete al as specified and directed. Note: Spares shall be measured and paid seperately

All as per item 1 above but for compressor 5 H 60 Make : Voltas

All as per of item 1 above but for compressor 5 H 120. Make : Voltas

All as per of item 1 above but for compressors 5F40. Make : Voltas

All as per of item 1 above but for compressors 5F20. Make : Voltas

Supply only the following spares for compressors 5H Model of Make Voltas :-

Pair of Connection rod bearing for 5H Model

Connecting Rod bush for 5H Model

Connecting Rod Pin for 5H Model

Piston Pin for 5H Model

Gasket for 5H Model

Piston ring compressor for 5H Model

Oil Ring for 5H Model

Shaft seal cover for 5H Model

Shaft seal gasket for 5H Model

Shaft seal assly with ring for 5H Model

Connecting Rod for 5H Model

Cylinder sleeve for 5H Model

Cylinder liner with 'O' rings for 5H Model

Solenoid valve for 5H Model

Power element 5H Model

Catchall filters for 5H Model

Current Transformer suitable for 5H Model

Thrust washer suitable for 5H Model

Seal end washer suitable for 5H Model

Pump end bearing suitable for 5H Model

Seal end bearing suitable for 5H Model

Suction Springs suitable for 5H Model

Suction Reeds suitable for 5H Model

Discharge Reeds suitable for 5H Model

Discharge Springs suitable for 5H Model

Crank Shaft suitable for 5H Model

Lock suitable for 5H model

DV Lock washer suitable for 5H Model

DV assembly suitable for 5H Model

Valve Plate suitable for 5H Model

Oil filter suitable for 5H Model

Supply and fixing suction pressure transdusers (setra) for 5H Model

Supply and fixing discharge pressure transducers (Setra) for 5H Model

Supply and fixing oil pressure transducers (Setra) for 5H Model

Supply only the following spares for compressors 5F Model of Make Voltas :-

Pair of Connection rod bearing for 5F Model

Connecting Rod bush for 5F type

Connecting Rod Pin for 5F Model

Piston Pin for 5F Model

Gasket for 5F Model

Piston ring compressor for 5F Model

Oil Ring for 5F Model

Shaft seal cover for 5F Model

Shaft seal gasket for 5F Model

Shaft seal assly with ring for 5F Model

Connecting Rod for 5F Model

Cylinder sleeve for 5F Model

Cylinder liner with 'O' rings for 5F Model

Solenoid valve for 5F Model

Power element for 5F Model

Catchall filters for 5F Model

Current Transformer suitable for 5F Model

Thrust washer suitable for 5F Model

Seal end washer suitable for 5F Model

Pump end bearing suitable for 5F Model

Seal end bearing suitable for 5F Model

Suction Springs suitable for 5F Model

Suction Reeds suitable for 5F Model

Discharge Reeds suitable for 5F Model

Discharge Springs suitable for 5F Model

Crank Shaft suitable for 5F Model

Lock suitable suitable for 5F Model

DV Lock washer suitable for 5F Model

DV assembly suitable for 5F Model

Valve Plate suitable for 5F Model

Oil filter suitable for 5F Model

Supply and fixing suction pressure transdusers (setra) for 5F Model

Supply and fixing discharge pressure transducers (Setra) for 5F Model

Supply and fixing oil pressure transducers (Setra) for 5F Model

Material and labour for providing eco friendly vapor barrier for HVAC Chilled water pipe lines by applying fevicol make non flammable, low VOC, anti fungal, water based lag coating on the chilled water pipe line surface uniformly by brush or spreader, wrap the duct with 7 mils thick canvas or glass fiber cloth tightly with overlapping for avoiding air gaps, allow to dry and apply an additional coating over the chilled water pipe line in similar method all as per standard and as directed, Make : Fevicol AC duct King lag coating AF5590

Supply and fixing Chilled water thermister sensor with controlling cable as suitable for existing chiller socket/groove for 5 H model voltas chiller units complete all as specified and as directed.

Supply and fixing Chilled water thermister sensor with controlling cable as suitable for existing chiller socket/groove for 5 F model voltas chiller units complete all as specified and as directed.

Supply and fixing temperature sensor with cable for 5 H Model voltas units complete all as specified and as directed

Supply and fixing temperature sensor with cable for 5 F Model voltas units complete all as specified and as directed

Supply and fixing temperature sensor with cable for Scroll type chiller units complete all as specified and as directed

Preventive maintenance and regular check up of round the clock AC Plant (Chiller / DX Type) chiller unit of any model with complete accessories, controlls comprising of compressors with standared fittings, electric motor with star delta starter of suitable capacity for 2 x 60 TR = 120 TR in operation and 1 x 60 TR as standby at Seaking simulator, INS Garuda operating on R-22, DX evaporator, shell and tube condenser, suitable expansion device, chilled water pumps -3 Nos, condenser water pump - 3 Nos. The entire system to be checked for every month interval up to contract duration and made serviceable in case of any defects observed during the routine check up for system for smooth functioning complete all as specified and as directed. Note:- (i) Programming/ Software updatation of display panels shall be included in quoted rates (ii) Major spares for replacement shall be measured and paid under relevant items (iii) Replacement of pump glands and minor spares costing upto Rs 500/- to be included in the quoted rate.

All as above item No 20 but for AC plant of capacity 2 x 26 TR = 52 TR in operation and 1 x 26 TR as standby at JOC.

All as above item No 20 but for AC plant of capacity 2 x 20 TR = 40 TR in operation and 1 x 20 TR as standby at AED, INS Garuda.

All as above item No 20 but for AC plant of capacity 2 x 17 TR = 34 TR in operation and 1 x 17 TR as standby at INHS Sanjivani Hospital, Naval Base Kochi.

All as above item No 20 but for AC plant of capacity 2 x 15 TR = 30 TR in operation and 1 x 15 TR as standby at Comcen.

All as above item No 20 but for AC plant of capacity 2 x 15 TR = 30 TR in operation and 1 x 15 TR as standby at MOC.

All as above item No 20 but for AC plant of capacity 2 x 15 TR = 30 TR in operation and 1 x 15 TR as standby at Antenna Park.

All as above item No 20 but for AC plant of capacity 2 x 75 TR = 150 TR in operation and 1 x 75 TR as standby at ND School

All as above item No 20 but for AC plant of capacity 2 x 55 TR = 110 TR in operation and 1 x 55 TR as standby at ASW Vajra

All as above item No 20 but for AC plant of capacity 2 x 75 TR = 150 TR in operation and 1 x 75 TR as standby at NSRY Weccors.

All as above item No 20 but for AC plant of capacity 2 x 26 TR = 52 TR in operation at ECHS Polyclinic.

All as above item No 20 but for AC plant of capacity 2 x 40 TR = 80 TR in operation and 1 x 40 TR as standby at AV Workshop.

All as above item No 20 but for AC plant of capacity 2 x 26 TR = 52 TR in operation and 1 x 26 TR as standby at MWC.

All as above item No 20 but for AC plant of capacity 2 x 39 TR = 78 TR in operation at CRS, NAY.

All as above item No 20 but for AC plant of capacity 2 x 30 TR = 60 TR in operation and 1 x 30 TR as standby at SH-12, MO (K).

All as above item No 20 but for AC plant of capacity 2 x 40 TR = 80 TR in operation and 1 x 40 TR as standby at SH-14, MO(K).

All as above item No 20 but for AC plant of capacity 2 x 40 TR = 80 TR in operation at SH-27, MO(K).

Supply and fixing in replacement of old unsv Hand Shut off valve upto 50mm, including welding /cutting the existing ms pipe line (suction and discharge) match the exisitng surface,complete all as specified and directed.

Supply and fixing in replacement of old unsv expansion valve suitable for central AC upto 20 TR Make: Voltas/ACCEL

All as above item No 38 but capacity above 20 TR upto 40 TR Make : Voltas

Supply and fixing in replacement of old unsv relief valve suitable for central AC upto 120 TR Make: voltas

Supply and fixing in replacement of old unsv strip heater of capacity 2-3 KW suitable to fit in existing pleanum/fitment stands complet all as specified and directed.

Supply & fixingf of replacement of Thermal Insulation of exposed area of ducting calss 'O' with Glass cloth covering on Out door Ducts ,exposed to sunlight using Class O Nitrile Rubber of 13 mm thickness outer sideof exisitng Ducts using manufacturer's recommended Rubber based Adhesive in a blend of solvents complete as per specifications.

Supply & fixing of replacement of Thermal Insulation of exposed area of ducting calss 'O' with Glass cloth covering on Out door Ducts ,exposed to sunlight using Class O Nitrile Rubber of 19 mm thickness outer sideof exisitng Ducts using manufacturer's recommended Rubber based Adhesive in a blend of solvents complete as per specifications.

Taking down old unserviceable canvas form AHUs duct to pleneum/Main supply air duct including dismantle of air dampers/fire dampers and supply and fix new premium quality leather type canvas locking rivits and sealing of silicon material of any size as per existing at site complete al as specified and directed.

Supply and fixing in replacement of analouge pressure gauge for existing pipe lines and plants as per suitable (dia) size and model including MS bend pipe upto gauge where required at site complete all as specified and directed.

Supply aand fixing in replacement of temperature gauges for existing pipe lines of central AC plants as per suitable size and model complete all as specified and directed

Supply , fabrication and erection in replacement of GI sheet with TDF flange rectangular/square duct of size 24 Gauge made out of 'L' shaped hollow profile, duly factory boxed, incl all accessories such as Corner, Cleat, Carriage bolt,Gasket and appropriate sealant on longitudinal joints etc complete complete all as specified and directed.

All as per item 47 above but duct size 22 Gauge

All as per item 47 above but duct size 20 Gauge

Supply and charging Refrigerant Gas R 22 in sealed cylinder all as specified and directed by Engineer in Charge.

Supply and charging Refrigerant Gas R 134A in sealed cylinder

Supply only Nitrogen gas contains 12 PSI of pressure in each cylinder of 6 cum Note for Item No 43 to 45 : Empty cylinder will returned to contractor after usage only.

Supply and fix in repairs poly F plus PB classical V- Belts suitable for existing Compressor motor and AHU motor sizes (any type of B -Series) all as specified and directed.Make : Fenner/Dunlopp

Supply and fix in repairs poly F plus PB classical V- Belts suitable for existing Compressor motor and AHU motor sizes (any type of A -Series) all as specified and directed. Make : Fenner/Dunlopp

Supply and fixing in replacement of tyre coupling along with nutbolts suitable as existing connections of primemover and compressor complete all as specified and directed.

Supply and charging,testing of compressor oil superior quality in sealed barrel all as specified and directed by Engineer in Charge. Make:IOC/HPCL/BPCL

Supply and fixing in replacement of microprocessor control panels VLRP type working with 15VAC for voltas control panels, make for 5H model central AC plant suitable for chilled water type and fitting for existing panels. Make: voltas(Soft hard)

Supply and fixing in replacement of microprocessor control panels VLRP type working with 15VAC for voltas control panels, make for 5H model central AC plant suitable for DX type and fitting for existing panels. Make: voltas(Soft hard)

Supply and fixing in replacement of microprocessor control panels VLRP type working with 15VAC for voltas control panels, make for 5F model central AC plant suitable for chilled water type and fitting for existing panels. Make: voltas(Soft hard)

Supply and fixing in replacement of microprocessor control panels VLRP type working with 15VAC for voltas control panels, make for 5F model central AC plant suitable for DX type and fitting for existing panels. Make: voltas(Soft hard)

Supply and fixing in replacement of microprocessor control panels for blue star make package type AC plant as suitable for invertor/normal operation type machines and fitting with all connected items for smooth operation of plants complete all as specified and as directed. Make: Blue star

Material and labour for brazzing/welding work at refrigerent copper pipe lines(suction/discharge) and rectify the fault and recharge the refrigerent as desired level in AC units. Note: welding mtrl,copper pipe material,welding gas cylinder shall be provided by contractor with his own transport upto near the centrl/Package AC plants inside Naval Base .

Supply and fixing of Hard PVC Piping 40 mm up to drain disposal area with nitrile rubber insulation complete all as specified and directed.

Supply and fixing 600MMX600MM fresh air inlet made-out of GI sheet 22 SWG duly fabricated with splitter damper arrangement and cowl and bird screen complete all as specified and directed.

Supply and fixing of supply/return air diffusers of machine fabricated madeout of aluminium 18G sheet construction of various sizes duly powder coated of approved colour to suitable as existing duct projestions/openings including GI collar VCD for supply air inlet all as specified and directed.

M & L Steel structural fabrication works fabricated from structural steel sections including nuts,cable trays,clamps bolts,washers, welding ,bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primary coat, one under coat and one finishing coat of paint complete all as specified and directed.

Taking down old existing GI pipes, supply , laying including welding, connecting and painting two coat of synthetic enamel paint complete of medium grade with all fittings and fixtures laid in floors or fixed to walls and ceilings etc. of following size :-

M&L for attending breakdown complaints pertains to higher side of various Central AC plant of any capacity as and when required by Ref-Mech and helper , with neccessary T&P for checking the equipment at existing location, find out the faults to the equipments, complete and rectification of minor problems(solinoid failures,oil pressure/ oil/suction/discharge pressure re settings,sensor errors,compressor control panel resetting,replacement/resetting of transduser etc) to make the plant functional in all respect all as directed by the Engr- in-Charge. Note: Major spares shall be measured and paid seperately

M & L for replacement of refrigerant pipe lines & supply and fix new M S Pipe (black) heavy duty with all accessories and insulation (as per requirement) with proper rigid supports for vibration free operation all as per OEM and directed by EIC for the following sizes :-

Supply and charging Refrigerant Gas R 407 in sealed cylinder

Material and labour for leak testing of chiller unit of capcaity upto 150 TR, by pressuring the unit with nitrogen gas as per OEM standards and hold for 8 hrs to check the pressure and flush out ntirogen gas and charging of refrigerant of required quantity after arresting the leak or capping the condenser/chiller tubes if necessary. The chiller shall kept in operation for 8 hrs and ensure there is no pressure drop and all as specified and as directed by EIC. Note :- The refrigerant gas and nitrogen gas shall be measured and paid separately under relevant item.

Supply and fix in repair CI butterfly valve full open with operating handle of size 80 mm dia including replacement of old nuts & bolts, packings modification of flanges if necessery and all as per specified and directed.

All as per item No 72 but of size 100 mm dia

All as per item No 72 but of size 125 mm dia Note : An amount of Rs 27498/- will be deducted against the above schedule as schedule of credit.

AR Traders (BID ID -3368379)

AISWARYA ENTERPRISES (BID ID -3368383)