T-64/EDCP/2023-24

Amount

Safe carriage of following materials from store centre-Pilibhit to various sites under EDD-Bisalpur including loading & unloading (sites/location detail enclosed as per annexure-10).

11/0.4 KV, 25 KVA T/F.

PCC Pole -8.5 mtr.

11 KV Ms T-Off channel.

Top channel (125x65x2040 mm.)

Base angel for S/s (75x75x6x2028) with complete nuts and bolts.

11 KV Disk Insulator composite 45KN (T&C type)

11 KV Pin insulator composite

11KV TPMO

11KV Composite Pin Insulator

Stay set Complete (Stay rod 16x1800 mm, wire 5 kg , clamp, bolt and nut with grouting)

Earthing com. (rod size 20x2500 mm,6 SWG GI wire etc.)

ACSR Weasel Conductor

LT lead XLPE Cable 3.5x70 sqmm

Erection of the double PCC Pole including cutting, making holes, fixing of all types of accessories digging of pits complete in all respect, as per RESSPO drawing.

Erection of stay set with stay wire, stay clamp & stay insulator including with grouting of stay set by concrete of ratio 1:4:8 as per RESSPO norms before back fitting of the pits including binding, climbing, clamping, tightening and nozzeling of stay wire in all respect as per RESSPO norms. cement, Brick, ballast, sand etc would be provided by the contractor.

Concreting of PCC Pole at the time of erection of pole in 1:4:8 concrete ratio from bottom of pole to ground level and plinthing of supports upto 300mm above ground level by using cement, sand & coarse aggregate in ratio 1:4:8 as per RESSPO drawing with watering/curing properly upto proper setting of plinthing. All matrial would be provided by the contractor.

Earthing of PCC Pole of the line is to be done by inserting the MS earth rod (1800x20mm) into soil by hammering and properly fastning with GI wire to each support by nut & bolt. Earthing rod must be 0.15 Mtr.above from the plinth of the support.

Mounting of 25 KVA distribution transformers on Double Pole, laying of cable jumpering and making all HT/LT connections complete work in all respect.

Laying of LT lead XLPE Cable 3.5x70 sqmm

Laying and sagging of 3 Phase ACSR Weasel Conductor complete work in all respect.

Fixing of 11 KV TPMO

Fabrication and Installation of 11 KV fuse set on midway 11 KV double pole structure with mention material As- MS channel 100x50x2028 mm, Iron strip-50x5x305 mm, fuse wire and holding clamps etc. complete work in all respect all required materials provided by contractor on his own cost.

Providing and fixing of holding clamps for S/S with bolts & Nuts

Providing and fixing of T-off Clamp

Providing and fixing of Stone Pad

Providing and fixing of danger board

Providing and fixing of barbed wire

Providing and fixing of LUGS of suitable size (70 sqmm.)

Providing and fixing of Stay Insulator

Safe carriage of received back 16 KVA T/F from site to Store Centre-Pilibhit after opening and dismantaling all connections and descend of 16 KVA T/F from PCC pole including loading, unloading at both ends and proper stacking at safe site under EDD-Bisalpur.

M/S BEG ENTERPRISES