DEPOSIT-Perunthodu VCB in Tanur municipality-Urgent repair works to Perunthodu VCB at Perunthodu in Tanur municipality in tanur assembly constituency in Malappuram district-General Mechanical Work

Amount

MS SHUTTERS-SUPPLY, FABRICATION, PAINTING and ERECTION of embedded parts, shutter, hoisting mechanism and hoisting bridge.

OD38193/2023-2024:Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges(#)

OD38192/2023-2024:Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges.(#)

OD38191/2023-2024:Supply of MS round bar including cost of conveyance charges. (#)

OD38190/2023-2024:Supply of bolt and nut up to 300 mm length including cost of conveyance.(#)

OD38225/2023-2024:FABRICATION and ERECTION of EMBEDDED PARTS of CANAL SHUTTERS ( upto 2 tonne weight) and accessories as per approved specifications, drawings and directions of deptl. officer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc complete but excluding cost of material already supplied-(CANAL GATE 1-16)

OD6500/2024-2025:Supply of 50mm Dia GI Pipes for fabricating Handrails

OD6501/2024-2025:Supply of 32mm Dia. GI Pipe for fabricating new Handrails

OD38210/2023-2024:Fabrication, Supply, erection and assembling in correct position and alignment by welding SS Embedded parts in 304L Grade like roller track, seal track, seal seat etc as per approved specifications, drawings and directions of deptl officer at site including cost of all materials, labour, machinery for plaining, welding, shearing, grinding etc, lead and lift, conveyance, incidental and handling etc complete-(CANAL GATE 5-16)

OD38224/2023-2024:FABRICATION and SUPPLY of STRUCTURAL STEEL CANAL SHUTTERS ( upto 2 tonne weight )/hoisting bridge /platform and accessories etc. for the same as per approved specifications, drawings and directions of deptl officer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc complete but excluding cost of material already supplied-(CANAL GATE 2-16)

OD38227/2023-2024:Providing EN-8 (Dia 63 mm) screw rod 7.50 tonne capacity 4.00 m lift screw hoist having one number of EN-8 screw shaft having a lifting speed of around 5.00 cm/min for 24 rpm of hand operation including cost of all materials, labour, hire charges and conveyance (CANAL GATE 14-16)

OD38250/2023-2024:PROVIDING of WORM & PINION having a lifting speed of around 5.00 cm/min for 24 rpm of hand operation including cost of all materials, labour, hire charges and conveyance.(#)

OD4790/2024-2025:PROVIDING BASE & NUT arrangement for hoisting the shutter including cost of all materials labour etc complete

85.116:Supplying and fixing in correct position with specified initial interface the flat type rubber seal confirming to IS 11855 to the gates including cost of SS bolts and nut all labour and machinery and incidental and conveyance charges complete as per approved specification and drawing

85.118:Supplying and fixing in correct position with specified initial interface L-type / bulb nose rubber seal confirming to IS11855 to the gates including cost of SS bolts and nuts and all labour and machinery and incidental and conveyance charges complete as per approved specifications and drawings

85.114:Painting all the exposed surfaces of the gate and embedded parts with two coats of epoxy coal tar black paint confirming to IS14948 with a minimum film thickness of 150+/-5 microns per each coat over two coats of priming coat applied with zinc primer containing not less than 85% of zinc on dry film with a film thickness of 70+/-5 microns , so that the total film thickness of all coats including priming coat at any rate is not less than 350 microns after cleaning the surface using hand and power tool cleaning including cost of all materials, labour charges , cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

OD38232/2023-2024:SUPPLYING and APPLYING GREASE on NEW SCREW ROD for CANAL GATE.(#)

OD38223/2023-2024:ERECTION of the CANAL SHUTTER ( up to 2 tonne weight) /hoisting bridge / platform including handrails , ladder etc. for the same including alignment correcting and setting complete including cost of all labour, machinery, incidental and conveyance , lead and lift charges etc complete but excluding cost of materials already supplied-(CANAL GATE 3-16)

OD38229/2023-2024:SUPPLY and STACKING of PAD LOCK(#)

CIVIL WORKS- Centering & Shuttering, Concreting Work for fixing C GROOVE, SEAL TRACK and SILL BEAM.

OD12570/2024-2025:RING BUND Type-I-Putting up ring bund as per approved shape 2.5m bottom width, 1m top width using empty gunny/polythene bags filled with earth placed in 2 rows at 0.6m apart and filled in between with puddle clay to form bund for an average height 2.00m including labour dismantling the bund after completion of the work etc. complete.

4.3.3:Centering and shuttering including strutting, propping etc. and removal of form work for:Columns, piers, abutments, pillars, posts and struts

5.2.2:Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up tot floor five level excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

Bidder Name

Kinanath V P