Improvement/ Strengthening of Dab Canal at Various Spots

Amount

Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil :

Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil :

Providing & Laying of stone soling hand packed in horizontal on level incl.cost of Stones

Providing & Laying of stone soling/Dumping of stones in horizontal on level Excd.cost of Stones

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°,landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more.

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand)

Extra for brick work with common burnt clay bricks/cement concrete bricks insuperstructure above plinth level upto floor five level

Providing and fixing 1st quality ceramic glazed floor tiles conforming toIS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Second class kail wood

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. Second kail wood(30mm thick)

4 mm thick glass pane (weighing not less than 10 kg/sqm)

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Second class Kail wood (35mm thick)

Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : Second class Kail wood (30mm thick)

Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia and 1.4 mm wide aperture with matching wood beading

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture.

Prividing and fixing of Exhaust fan of approved make

Providing & Fixing of Mild steel fittings bright finished or black enamelled:

100mm x 10mm Tower bolts, Barrel type

250mm x 10mm tower bolts, barrel type

125mm handles

150mm hooks

200mm Aldrop

Holdfasts

Providing and fixing of lighting/Heating points including Lead lamps, switches, 1.5mm/ 2.5mm wiring and sockets of required rating and other necessary items all complete: Lighting points

Heating Points

Providing/Fixing Sanitary/Water Supply Items including carriage ,testing and commisioning all complete job

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests.

Providing and fixing P.V.C low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete: 10 liter capacity -White

Providing and fixing PTMT grating of approved quality and colour.Circular type 100 mm nominal dia.

100mm PVC waste pipe

75mm PVC Waste Pipe

100mm PVC P/S Trap

75mm PVC P/S Trap

100mm PVC Bend

75mm PVC Bend

Gate Valve (Gun Metal)

Balcock (brass) for water Storage Tank

CP Bib Cocks along with all associated CP fittings

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge

i)15mm (Concealed)

ii)20mm(External Work)

Bright Polished Stop Cock

Bright Polished Towel rail

Semi Rigid PVC Waste pipe for sink and Wash Basin 40mm dia with length not less than 700mm i/c PVC waste Fittings.

Providing and laying of Precast RCC Rings of for Construction of Septic Tank circular in plan using 1 feet high and 4feet dia.RCC rings including earthwork excavation and Exacavated earth to be leveled beyond the cutting edges.all complte job.

Centring & shuttering incl. strutting, propping etc. & removal of formwork Foundations, footings, bases of columns etc. for mass concrete

Suspended floors, roofs, landings, balconies and access platforms.

Edges of slabs and breaks in floors and walls under 20 cm wide

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

12mm Cement plaster of mix: 1 : 4( 1 cement : 4 fine sand)

Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge: 1:3:6 or richer mix (i/c equivalent design mix)

Providing/Fixing of winch machine incld. all accessories complete job

Single winch machine

Providing/Fixing of winch rods for damaged Gates

Rubber seal complete job

Providing/Fixing of Nut & Bolts

Greesing & oiling complete job

Welding, including transportation of plant at site etc. complete By electric plant

Guage plates( 5' hieght)

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded

Providing of diffferent accessories

Handles

Rain caps for gates

Silt clearance from Canals incl. intial lead 50 m and lift 1.5 m wet

Carraige of materials by Mechanical Transport incld loading ,unloading and stacking:

Cement/Steel for an avg lead of 10 km

sand for an avg lead of 10 km

20mm agg for an avg lead of 10 km

40mm agg for an avg lead of 10 km

Stones/stone solling for an avg lead of 10 km

Bricks for an avg lead of 70km

Excavated silt material for an average lead of 2 Km

Carraige of materials by Manual Labour from road site to actual site of work incld loading ,unloading and stacking for an average lead of 100 mtr

Cement

steel

20mm agg

40mm agg

Stones/stone solling

Bricks

Carraige of materials by Manual Labour from road site to actual site of work incld loading ,unloading and stacking for an average lead of 200 mtr

Cement

20mm agg

40mm agg

Stones/stone solling

M/S MOHD MAQBOOL LONE (BID ID -2642813)

parray constructions (BID ID -2642696)