PROV OF HUMANITARIAN ASSISTANCE AND DISASTER RELIEF AND MOBILE TECHNICAL SUPPORT PLATOON STORAGE FACILITY FOR MEDICAL STORES BEHIND LOGISTICS COMPLEX AS AND AS TO PATHALOGY DEPT FOR CREATION BSL2 MOLECULAR BIOLOGY LAB FOR COVID19 TESTING WITH ASSOCI

Amount

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil all as specified and directed

Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation, trenches for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan and n exc 1.5m in depth and getting out in soft/loose soil complete all as specified and as directed.

Excavating over areas not exceeding 1.5M deep and getting out in soft/loose soil complete all as specified and as directed.

Excavation in post hole each not exc 0.5 Cum getting out returning, filling in and ramming earth or broken rubble mixed into earth around in layers n.exc 25 cm watering and removing surplus soil to a distance n.exc 50 m and making surfaces good in soft/loose soil complete all as specified and as directed.

Returning, filling in, including spreading, watering and well ramming in layers not exceeding 25cm thick with soils complete all as specified and as directed.

Removing excavated soils exceeding 50m not exceeding 100 m and deposting where directed at a level n exc 1.5m above the starting point complete all as specified and as directed.

Removing excavated spoil to a distance exceeding 250 M but not exceeding 500 M and depositing where directed at a level n. exc 1.5 m above the starting point all as specified and directed.

Sand filling in floors or in foundations, laid in layers , spread, levelled including watering and consolidation complete all as specified and as directed.

PCC 1:4:8 type D-2 (40mm graded aggregate) as in foundation, filling and mass concrete complete all as specified and as directed.

PCC 1:3:6 type C-2 (40mm graded aggregate) as in foundation, filling and mass concrete complete all as specified and as directed.

PCC 1:3:6 type C1, (using 20mm graded granite stone aggregate) in bed blocks etc., including necessary form work complete all as specified and as directed.

75 mm thick plain cement concrete type B2,1:2:4 using 40mm graded stone aggregate for sub base/ / levelling course for floorings complete all as directed.

Reinforced Cement Concrete design mix M 30 for foundations including rafts, footings and mass concrete, beams; plinth beams; bases for columns, etc.; basement slabs, complete all as specified and as directed.

Reinforced Cement Concrete design mix M 30 for columns, pillars, piers, posts and struts and the like complete all as specified and as directed.

Reinforced Cement Concrete design mix M 30 in beams, cantilevers, linetels over 1.5 Metre span and the like complete all as specified and as directed.

Reinforced Cement Concrete design mix M 30 in chajjas and like complete all as specified and as directed.

Reinforced Cement Concrete design mix M 30 for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

Use and waste of form work to sides of concrete foundations , footings,bases of columns,raft and raft beams,sides and soffits (if any) of foundation and plinth beams,and similar work,vertical or to batter for rough finished surfaces complete.

Use and waste of form work to sides of pillars,post struts,piers columns and stanchions of square or rectangular shape in rough finished surfaces of concrete complete ete all as specified and directed.

Use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc for rough finished surfaces of concrete complete ete all as specified and directed.

Use and waste of form work to soffits of suspended slabs such as roof slabs, floor slabs not exceeding 200 mm thick complete all as specified and directed.

Use and waste of formwork to chullah hoods, chajjas, troughs and similar items including edges for rough finished surfaces of concrete complete ete all as specified and directed.

Mild Steel high strength Corrosion resistant TMT deformed bars of grade Fe-500D of bars 10 mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and as directed.

Ditto all as per serial item No.23.00 but 6 to 8 mm dia

Mild Steel high strength corrosion resistant TMT deformed bars of grade Fe-500D of bars 5mm dia and over upto and including 10mm dia stirrups ,spacers and binders cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and as directed.

Brick work with fly ash bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as specified and as directed.

Brickwork with fly ash bricks in half brick thick straight or curved on plan exceeding 6m mean radius and built in cement mortar 1:4 all as specified and as directed.

Rendering to brick / concrete ceiling surfaces, 5 mm thick in Cement Mortar 1:3, surfaces finished even and smooth without using extra cement complete all as specified and as directed.

Rendering 10 mm thick in cement mortar 1:6 on fair face of brick work or concrete surface for finished even and smooth with out using extra cement all as specified.

Rendering 15mm thick on concrete / brick surface in two coats, first coat 10mm thick in CM ( 1:6) and 2nd coat 5mm thick in CM (1:4) finished even and smooth without using extra cement, 2nd coat mixed with water proofing compound @2% by weight of cement all as specified and directed. Note: Water proofing compound will measued and paid separately.

Supply only integral water proofing compound conforming IS 2645-1975 of approved make. Make : Acco proof / Impermo / Lik proof / Scott No. 1

Hardcore of gauge not exceeding 63 mm of broken stone, deposited, spread and leveled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

PCC 1:2:4 type B2 (using 40 mm graded stone aggregate) as in plinth protection 75 mm thick complete all as specified and as directed.

Preparation of new steel surfaces of any description , over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed. Make :M/s. Asian Paints [Apcolite], M/s. Berger Paints [Luxol], Jenson & Nicholson [Brolac] all are 1st quality.

Preparation of new wood and wooden based surfaces of any description , over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. Make :M/s. Asian Paints [Apcolite], M/s. Berger Paints [Luxol], Jenson & Nicholson [Brolac] all are 1st quality.

Preparation of old painted wood surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coat of synthetic enamel paint, complete all as specified and as directed .

Vitrified Ceramic tiles double Charged, light shade 10 mm thick (square / rectangular) polished, area of each tile not exceeding 0.36 sqm, as in floors etc laid over and including 15 mm thick screed bed in CM(1:6) set & jointed in neat cement slurry & pointed in white or coloured cement to match complete all as specified and as directed. Make:- Kajaria Ceramics Ltd / Asian Granito India Ltd / Somany Ceramics Limited / Varmora Granito Pvt Ltd / H & R Johnson India Ltd / Nitco / Orient Bell Ltd/ Oasis Vitrified Pvt Ltd (Premium Quality)

20 to 25 mm thick Machine cut Kota stone slab as in flooring laid over including 20 mm thick cement screed bed in CM (1:6) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

Coloured, non skid, joints free ceramic tiles 7 to 8 mm thick ( square / rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc. laid over and including 15 mm thick screed bed in CM(1:6) set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed. Make : Kajaria Ceramics Ltd / Asian Granito India Ltd / Somany Ceramics Limited / Varmora Granito Pvt Ltd / H & R Johnson India Ltd / Nitco / Orient Bell Ltd/ Oasis Vitrified Pvt Ltd (Premium Quality)

Ditto all as per serial item No.39 but in skirting

Granite slab, 18 to 20 mm thick machine cut, pre-polished , bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite including cutting a hole in the granite slab for gas pipe etc to any shape and rounding of exposed edges and polishing as in cooking platform,floorings and in Satircase tread and riseres including 3 Nos of V Grrove over and including screed bed bedding layer,15 mm thick in cement mortar 1:6 complete all as required site (Overall size of the slab shall be measured) complete all as specified and as directed.

Vitrified Ceramic tiles double charged, light shade 10 mm thick (square / rectangular) polished, area of each tile not exceeding 0.36 sqm, as in vetical surfaces such as skirting ,dados etc laid over and including 10 mm thick backing coat in CM(1:3) set & jointed in neat cement slurry & pointed in white or coloured cement to match complete all as specified and as directed.

20 to 25 mm thick machine cut Kota stone slab as in riser of steps, skirting, dado and pillar laid over including cement backing coat of 10mm thick in CM (1:3) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

PVC corner half round corner beading not exe 15 mm girth fixed to tile junctions complete all as specified and directed.

Preparing new plastered surfaces of wall and applying three coats of white wash complete all as specified and as directed. Make : Birla Laval Plast / Berger / J & N / Shalimar Paints / Asian Paints

Ditto all as per serial item No.45 but in ceilings

Preparing old plastered surfaces in ceilings and applying two coats of white wash complete all as specified and as directed.

Preparing new plastered surfaces of walls applying two coats of oil bound distempered over a coat of alkali resisient primer all as specified and directed Make: Berger [Jadoo] / Nerolac / British Paint / Jotun India Pvt Ltd / Velvet Acrylic Distemper [Crimson Paints Pvt Ltd.] /Asian ( All 1st quality)

Preparing new plastered surfaces of walls applying two coats of distempered oil emulsion over a coat of alkali resisient primer over two coats of putty as 1st coat of putty (1.50mm thickness) and 2nd coat of wall putty (1.0 mm thickness ) all as specified and directed Make: Berger [Jadoo] / Nerolac / British Paint / Jotun India Pvt Ltd / Velvet Acrylic Distemper [Crimson Paints Pvt Ltd.] /Asian ( All 1st quality) Make for Putty : JK white cement / Birla wall care / Jenson & Nicholson

Complete removal of existing treatment on walls, preparing surfaces of walls applying one coat of Cement based Wall Care Putty and sand papering till obtaining smooth surface and applying two coats of distemper oil emulsion over a coat of primer complete all as specified and as directed.

Preparation of new plastered wall surfaces and applying two coats of weather proof Acrylic Exterior emulsion paint {weather proof anti fungal emulsion paints} of approved make and shade over a coat of approved primer as recommended by the manufacturer including necessary scaffolding and safty precations up to required height complete all as specified and as directed. Make : Apex Ultima [Asian] / Extra Maxium Ultra [Shalimar] / Weather Coat [Berger Paints Ltd.] / Dulax / Royal Acrylic [Crimson Paints Pvt Ltd.] / Jotun India Pvt Ltd

Powder coated Aluminium frame for doors, door shutters, windows, ventilators, [ ISI Marked ] or sliding window shutters etc., with one or more rebates with powder coating of minimum 50 micron thick including joining cleat for fixing etc., complete all as specified and as directed. Make : Jindal / Hindalco / Balco / Modern Fabricator / Alumilite Pvt Ltd. / Ajit India Pvt Ltd

Powder coated Aluminium window and ventilator shutters, sliding type without sash bar with powder coating of any colour of minimum 50 micron thick,, aluminum section weighing 0.55 Kg/ RM including necessary joining cleats, glazing clips, rubber packing, anodised aluminum snap beading, screws, anodised aluminum fittings such as handles, locks etc., complete all as specified. Make : Jindal / Hindalco / Balco / Modern Fabricator / Alumilite Pvt Ltd. / Ajit India Pvt Ltd

Anodised aluminium deco grill DG-104 of 7 mm thick with suitable channel to windows/ventilators including joining cleat for fixing and necessary fixing arrangements as required, complete all as specified and as directed. Make : Jindal / Indal / Hindalco

In repairs, Second class hard-wood in scantlings clean swan, framed and to replace old and decayed timber (including piecing, scarfing, etc., of old and new timbers if required) and removing defective portions to store complete all as specified and as directed.

35 mm Flush shutters, [ ISI marked ] solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

40 mm Flush shutters, [ ISI marked ] solid core construction, with particle board core and plywood face panels, commercial type on both sides complete all as specified and as directed. Make for sl. item No.56 & 57:M/s. Timber Technic, Phase-V Industrial Development Area Jeedimetla, Hyderabad – 500 235 / M/s. Wood India Products, Calcutta / M/s. Standard Doors, Jeedimetla, Hyderabad / M/s. Electrical & General Wood Industries K-6, Industrial Development Area, Uppal, Hyderabad – 500 035 / M/s. Sri Ram Wood Products [P] Ltd, 31-34-145/1, Bangaramma Metta, Visakhapatnam / M/s. MP Wood Products, 124, Labriya Bheru, Dhar Road, Indore / M/s. Doorking Industries, 27, G.N Block Sector-V, Industrial Estate, Salt Lake, Calcutta – 700 091

100 mm long [ ISI marked ] medium weight cold rolled mild steel butt hinges complete all as specified and as directed.

125 mm long [ ISI marked ] medium weight cold rolled mild steel butt hinges complete all as specified and as directed.

200 mm long [ ISI marked ] aluminium, anodized, barrel tower bolts of extruded section complete all as specified and as directed.

Aluminium alloy anodised Sliding Door Bolt (ISI Marked) with hasp and staple [Bolt Type] of size 300 mm and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed.

150 mm long [ ISI marked ] extruded aluminium alloy handles, fabricated type, anodized complete all as specified and as directed.

Prelaminated particle board 12 mm thick exterior grade, both sides decorative choice lamination fixed with screws to timber frame work, brick wall or concrete surfaces complete all as specified and as directed Make : Anchor / Novopan / Deco Board / Bhutan Board / Kitply / Eco Board / Archidlam / Asis / Greenply Industries

Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed with stainless steel wire staples complete all as specified and directed.

5 mm thick sheet glass ordinary quality and glazing with oil putty in square exceeding 0.5 Sqm in each pane complete all as specified. Make:Saint Gobain Glass / Modiguard Float Glass / Asahi India / Hindustan

8.0 mm thick figured glass, pin head type, ordinary quality and glazing with oil putty in squares exceeding 0.5 sqm in each pane complete all as specified and as directed. Make: Saint Gobain / Modi Guard / Asahi / Hindustan Pilkington

Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and as directed. Make : SGG EVO / Evolite / Envision

Brass mortise Lock, Vertical type of size 100 mm, 4 Levers with 2 keys of Godrej Make, complete all as specified and as directed.

Demolition of brick work or stone / boulder masonry, built in cement mortar including all quoins, pillars etc., and disposal off unserviceable materials, debris to out side MD land complete all as specified and as directed.

Demolition of Plain Cement Concrete of any description and in any position not otherwise specifically provided and removing rubbish to out side MD land work complete all as specified and as directed.

Demolition of Reinforced cement concrete (reinforcement cut as required to facilitate demolition) and in any position not otherwise specifically provided and removing rubbish to out side MD land work complete all as specified and as directed.

Dismantling of floor, hearth and wall tiles / stone slabs of any description or thickness as in floors, skirtings etc laid bedded and pointed in any mortar and removal of rubbish to out side MD land complete all as specified and as directed.

Plain Cement Concrete 1:2:4, Type B-1, using 20mm graded aggregate as in Sub base / levelling course 25 mm thick, for flooring complete all as specified and as directed.

Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc., including removal of rubbish to outside the premises, and depositing serviceable materials where directed and leaving the work site clear of any plastering complete all as specified and as directed.

Taking down chowkats or frames not exceeding 1.5 sqm each with shutters (without taking off shutters from frame) complete all as specified and as directed.

Taking down chowkats or frames exceeding 1.5 Sq. M but not exceeding 4 Sq. M each with shutters (without taking off shutters from frame) complete all as specified and as directed.

Taking down shutters of any description exceeding 1 Sq. M but not exceeding 2 Sq. M each complete all as specified and as directed.

Pre-Painted Galvalume aluminum zinc coating GI based corrugated steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self-tapping screws complete all as specified and directed. MAKE : Tata Blue Scope / Saxena Marine Tech Pvt Ltd/ Build Tech / Jindal

Pre-Painted Galvalume aluminum zinc coating GI based plain steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self-tapping screws as specified and as directed. MAKE : Tata Blue Scope / Saxena Marine Tech Pvt Ltd/ Build Tech / Jindal

Aluminium anodised snap grid frame work for false ceiling of grid size 605 x 605 mm with Aluminium "T" section of size 38 x 25 x 1.50 mm thick for main runners, 25 x 25 x 1.5 mm thick for cross runners and angle of size 25 x 25 x 1.50 mm thick along the walls suspended with and including 4 mm dia., Galvanized mild steel wire as in suspenders of ceiling members fixed in proper position complete all as recommended by manufacturer complete all as specified and as directed. Make:Jindal / Hindalco / Indalco

Gypsum Board 12 mm thick in ceiling fixed with screws as per manufacturer's instructions complete all as specified and directed. Make: Lafarge / Gypsum India Ltd

Preparing new plastered surfaces of any description ,in ceiling applying two coats of plastic emulsion over priming paint on cement or plastered surfaces all as specified and directed Make: Berger [Silk] / ICI [Dulux Velvet Touch] / Shalimar Paints / Asian Paint Ltd. / Nerolac Paints Ltd. / Jotun India Pvt Ltd

Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: arge hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging Ropes ; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut with diameter of shank 5 to 10 mm, but length of bolt n.exc 5cm long complete all as specified and as directed.

Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut with diameter of shank 11 to 15 mm, but length of bolt exc. 15 cm but n.exc 22.5cm long complete all as specified and as directed.

Rolled Mild Steel sections as in Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161- 1979 grade St.-240 complete all as specified and directed.

Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel, square or flat sections) including distance pieces, cleats etc. conforming to Fe 410-W (Gde-E- 250) quality-A complete all as specified and directed.

Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe 410-W (Gde-E- 250) quality-A complete all as specified and directed.

MS hand rails, half round or other steel section or core for wooden hand-rail straight portion,drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes,notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc.,and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.

Mild steel in flat, round or squae bars, in available lenth Fe-410-W (Gde-E-250) quality A complete all as specified and directed.

Supply only Chain link MS galvanisd fencing, any size or type made of 3 mm dia wire and including PVC coating of 1.3mm thickness 50X50 mm mesh as approved by the GE complete all as specified and as directed. Make :Global Technocrats Pvt Ltd/ A-1 Fence Products Company Pvt Ltd / Shiva Engineering Co.

Fixing only PVC chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed.

Mild Steel Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors, and gates; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe Fe 290 Gde E-165 including for portions framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc and necessary welding or fixing with screws etc as directed

Mild steel Round bars 10 mm dia., and over cut to length, for securing chain link fencing conforming Fe-410-W (Gde-E-250) quality A complete all as specified and directed.

Taking down eaves gutters and CI rain water pipes (of any or pattern) including all fittings, heads, shoes, bends, swan-necks, etc., (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed.

PVC (SWR) pipes single socketed 75 mm bore in any length with rubber ring joints, fixed to wall all as directed. Make: Kisan Mouldings Limited / Supreme / Prince

PVC (SWR) pipes single socketed 75 mm bore in any length with rubber ring joints, laid in trenches or in floors all as directed.

PVC(SWR) floor trap 75mm outer dia, plain, with square openable grating including jointing with solvent cement all as specified.

PVC (SWR) bend any raidus 75 mm bore with access door.

PVC (SWR) bend any raidus 75mm bore

Taking up or down 15 mm bore steel tubing and connections, including cleaning for Refixing or removal to store complete all as specified and as directed

Ditto all as per serial item No.101 but 20 mm dia bore

GI water tubing 15 mm dia bore ISI marked medium grade including all fittings such as bends, tees, short pieces connectors, elbows, reducers, unions, sockets etc and fixing accessories such as pipe hooks, screws, clamps etc laid in to walls , ceilings or floors etc complete all as specified. Make:-Surya Roshni Ltd / Tata / Jindal steel / Prakash

Ditto all as per serial item No.103 but 20 mm dia bore

Vitreous China Ware Wash hand basin white, Wall Hung Basin with Fixing Accessories Set size 560 x 470 x190 mm size including Full pedestal with fixing accessories etc complete all as specified and as directed. Make:- Jaquar & Company Pvt. Ltd. Model- Cat No. ARS-WHT-39801 & ARS-WHT-39301/ Prayag / Kohler / Roca / Cera [First Quality] / Hindware [Italian Collection] / Parryware [Superfine] / Johnson Pedder

Fancy type chromium plated 15 mm bore Angle / plain Stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions including taking down the existing fitting complete all as specified and as directed. Make: M/s Hindware / Orient / Seiko / Dripless

Aquisense Sensor Faucet for Wash Basin With Base Flange including all necessary fittings and fixtures complete all as specified and as directed. Make :M/s.Jaquar Model No. SNR-CHR-51011/ Parryware / Hindware

In repairs, Stainless steel Soap dish and fixed to walls with necessary screws etc. complete all as specified and as directed.

In repairs, Towel Ring, Stainless steel , Fancy Type fixed with chromium plated brass screws and wooden/plastic cleats weighing minimum 90 gms complete all as specified and directed.

In repairs, Towel rail 600 mm long, Stainless steel fixed with and including chromium plated brass screws complete all as specified and directed.

E/M PORTION

Taking down old point wiring for light/fan/socket/call bell point of any type from the walls ceiling and making good surfaces comlete all as specified and as directed.

Taking down sheet metal enclosure, MCB DB incl MCCBs from site and making goods the disturb surface of wall comlete all as specified and as directed.

Taking down old / perished sub main wiring of any type aluminum conductor copper conductor along with TW batten/PVC conduit comlete all as specified and as directed.

Point wiring with two runs of single core 1.5 Sq.mm. (Nominal area) PVC insulated unsheathed multistranded copper conductor cable FRLS (ISI marked) drawn through and including non metallic PVC conduit 20 mm bore medium grade (ISI marked) concealed / surface fitted type including Flush type metal GI boxes for fixing modular type / MS sunken box for conventional type switches, sockets, regulators etc. including provision of multistranded 1.5 Sq.mm copper conductor cable FRLS [ISI marked] as earth wire connected to common earth dolly and earth in distribution board complete all as specified and as directed, for one light/exhaust fan/fan point/call bell controlled by one way switch. Make of Cable : Finolex, Polycab, Plaza, Gloster, Harsh all are ISI marked and FRLS cables Make of Conduit : Avon Plast,Precision, Finolex all are ISI marked.

Ditto all as per serial item No. 116 above but for one 3 pin, out let 5Amps socket on independent board including 1. 5 Sqmm earth continuty FRLS Copper Cable comlete all as specified and as directed.

Ditto all as per serial item No. 116 above but with two runs of 2.5 Sqmm FRLS copper cable for one 15 Amps socket including 2.5 Sq mm FRLS copper conductor cable for earth continuity conductor and connecting it to earth dolly complete all as specified and as directed.

Ditto all as per serial item No. 116 above but with two runs of 4.0 Sqmm FRLS copper cable for one 15 Amps, geyser/AC/ Water cooler point including 4.0 Sq mm FRLS copper conductor cable for earth continuity conductor and connecting it to earth dolly complete all as specified and as directed.

In repairs, Sub main wiring with 2 runs of 4 Sqmm PVC insulated FRLS Copper conductor cable in including PVC conduit 20 mm dia along with one run of 4.0 Sq.mm FRLS copper cable for earth continuity conductor as earth lead and connecting to common earth dolly including complete all as specified and as directed. Note: Two runs 4 Sq.mm. cable, one run of 4 Sq.mm cable and one run of PVC conduit will be measured as one unit. Make :(i) CABLE : Finolex, Polycab, Plaza, Gloster, Harsh all are ISI marked and FRLS cables (ii) Make of Conduit : Avon Plast,Precision, Finolex all are ISI marked.

Sub main wiring with 2 runs of 6 Sqmm PVC insulated FRLS Copper conductor cable in including PVC conduit 20 mm dia along with one run of 6.0 Sq.mm FRLS copper cable for earth continuity conductor as earth lead and connecting to common earth dolly including complete all as specified and as directed. Note: Two runs 6 Sq.mm. cable, one run of 6 Sq.mm cable and one run of PVC conduit will be measured as one unit. Make :(i) CABLE : Finolex, Polycab, Plaza, Gloster, Harsh all are ISI marked and FRLS cables (ii) Make of Conduit : Avon Plast,Precision, Finolex all are ISI marked.

Distribution Board, SPN 8 Way ,Double door 240V with 200Amps rated bus bar complete all as specified and as directed. Make : Indo Asian cat part No. 811807[Optipro] / Standard / Havells

Distribution Board, SPN 4 Way ,Double door 240V with 200Amps rated bus bar for provision of four pole MCB complete all as specified and as directed. Make : Indo Asian cat part No. 811807[Optipro] / Standard / Havells

MCB SPN 40 Amps 240 Volts B curve, 10 KA complete all as specified and as directed. Make: Indo Asian Cat part No. 811152 / Legrand / L & T [Hager] / Siemens / ABB / Schneider / GE / C & S

MCB SP 6 to 32 Amps, 240 Volts, B curve, complete all as specified and as directed. Make: Indo Asian Cat part No. 811122 to 811129 / Legrand / L & T [Hager] / Siemens / ABB / Schneider / GE / C & S

Sheet metal enclosure single pole and neutral enclosure with two pin and earth plug and socket complete with one single pole MCB 20 amps capacity complete all as specified and as directed. Make : INDO ASIAN / STANDARD / HAVELLS

Switch Modular type single pole 6 Amps One Way AC 230V, 50HZ supply 1 module complete all as specified and as directed. Make : Legrand / Crabtree / Anchor (Roma) / MK

Switch Modular type single pole 16 Amps One Way AC 230V, 50HZ supply 1 module complete all as specified and as directed. Make : Legrand / Crabtree / Anchor (Roma) / MK

Bell electric, Ding Dong AC 230 Volts, single pole complete all as specified and as directed. Make : Legrand / Cona / Anchor / Bajaj

Bell push Modular type single pole 6 Amps One Way AC 230V, 50HZ supply 1 module complete all as specified and as directed. Make : Legrand / Crabtree / Anchor (Roma) / MK

Modular type socket 6A 2/3 Pin Combined AC 230V, 50HZ complete all as specified and as directed. Make : Legrand / Crabtree / Anchor (Roma) / MK/ ABB

Modular type socket 6 A/ 16A 2/3 Pin Combined multi purpose AC 230V, 50HZ complete all as specified and as directed. Make : Legrand / Crabtree / Anchor (Roma) / MK / ABB

Stepped type modular fan regulator,120 W 2 module complete all as specified and as directed. Make: ABB of model CPW2SFR5/ MK / Anchor(Roma)/ Legrand

Modular white cover plate with frame 2 module complete all as specified and as directed. Make : Legrand / Crabtree / Anchor (Roma) / MK

Modular white cover plate with frame 3 module complete all as specified and as directed. Make : Legrand / Crabtree / Anchor (Roma) / MK

Modular white cover plate with frame 4 module complete all as specified and as directed. Make : Legrand / Crabtree / Anchor (Roma) / MK

Modular white cover plate with frame 6 module complete all as specified and as directed. Make : Legrand / Crabtree / Anchor (Roma) / MK

Modular metal flush box, but 1/2 3 module complete all as specified and as directed. Make: MK/Roma/ABB/Legrand/Legrand

Modular metal flush box, but 4 module complete all as specified and as directed. Make: MK/Roma/ABB/Legrand/Legrand

Modular metal flush box, but 6/8 module complete all as specified and as directed. Make: MK/Roma/ABB/Legrand/Legrand

Supply and spreading clean dry sand as in cable cushioning in trenches complete all as specified and as directed. (Note: Punned thickness only shall be measured)

Supply and lay un reinforced precast concrete cable covers fonfirming to IS 5820-1970 class LV Type 2 Flat of size 230 x 150 x 70mm trenches as protection to cable complete all as specified and as directed.

Ceiling fans AC single phase 230 V of size 1200 mm sweep with complete set with fixtures, 5 star rating, metallic body complete all as specefied and directed. Make: Havells/Bajaj/CG/Orient

Exhaust fan 300 mm sweep or nearest size, fibre body (Heavy duty), complete with louvers suitable for operation on 230 V AC, 50 Hz AC including making suitable size of opening in wall for fixing and making good the distrubered surfaces etc complete all as specified and as directed Make : Havells/Bajaj/CG/Orient

Air circulator fan 450 mm sweep or nearest size, complete suitable for operation on 230 V AC, 50 Hz AC single phase, oscillating suitable for wall mounting including all accessories complete all as specified and as directed Make : Havells/Bajaj/CG/Orient

Taking down ceiling fan 1200 mm sweep complete cleaning the grease oil etc spray painting with 2 coats of synthetic emamelled paint over a coat of primer including replacement of bearing, capacitor, cotton pin, rubber coal, MS nuts bolts washer, connector prewired from connector from connector to ceiling rose with twin core flexible copper conductor cable 24/0.02 refixing in position connecting testing etc complete all as specified and directed.

Ditto all as per serial item No. 146 above but exhaust fan size 300 mm dia

Supply , Install, testing and commissioning of hi wall split units BEE 5 star rated air-conditioner indoor / out door complete with cord less remote control unit and with in built air ioniser and plasma filter for better indoor air quality with latest inverter technology having ECO friendly Refrigerent gas, copper condensor coil and EER 5 of capacity 1 TR including necessary brackets (where ever required) and refrigerant gas complete all as specified and directed. Make:- Blue Star/ Hitachi/ Carriers

Fixing (Install) only and testing and commissioning of hi wall split units BEE 5 star rated air-conditioner indoor / out door complete with cord less remote control unit and with in built air ioniser and plasma filter for better indoor air quality with latest inverter technology having ECO friendly Refrigerent gas, copper condensor coil and EER 5 of capacity 2 TR including necessary brackets (where ever required) and refrigerant gas and old AC handed over to department and making good the surface finish matching with the existing surface complete all as specified and directed. Note:- Air-Conditioner shall be issued under Sch"B" for free for installation

Voltage stablizer for automatic operation, single phase naturally air cold indoor type and designed input variation between 130 volt to 300 volt with out put voltage stablised at 230 volt with accuracy of +/-2.5% and of capacity 4 KVA. Make :Voltamp / APLAB / Andrew Yule / Brentford / AE / Vintec [Volina]

Voltage stablizer for automatic operation, single phase naturally air cold indoor type and designed input variation between 130 volt to 300 volt with out put voltage stablised at 230 volt with accuracy of +/-2.5% and of capacity 5 KVA. Make :Voltamp / APLAB / Andrew Yule / Brentford / AE / Vintec [Volina]

Supply, lay, joint, test and commission of LT cable 1100 V grade, [ISI marked] FRLS XLPE insulated, Screened, PVC bedded, Galvanised strip or wire armoured and sheathed, Aluminium conductor Cable of size 2 Core, 6 Sq.mm including cable glands, lugs, jointing materials etc laid in trenches / floors / ducts complete all as specified and as directed. Make: Polycab / Universal / Nicco / Havells / Gloster Cables / KEI Industries Ltd / / Asian Cables / Finolex

Surface/ Recessed mounted LED light of 1800 Lumens with all accessories internally pre wired and including connecting up with twin core twisted copper conductor cable with suitable size complete all as specified and as directed Make :Bajaj / Havells / Crompton/C&S / Wipro/Philips / Surya Roshni Ltd / Wipro / GE / Simco / HPL / Jaquar

Dismantling and re-fixing surface/ Recessed mounted LED light of 1800 Lumens with all accessories internally pre wired and including connecting up with twin core twisted copper conductor cable with suitable size complete all as specified and as directed

2x2 recessed mounted LED light flat panel of 3600 Lumens with all accessories internally pre wired and including connecting up with twin core twisted copper conductor cable with suitable size including taking down existing fittings and make the disturbed surface match with the existing surface complete all as specified and as directed Make : Bajaj cat No BCTLR 36W FP WHN / Philips / Cromton / Surya Roshni Ltd / Wipro / GE / Hevells / Simco / HPL / Jaquar

Sleek LED mirror light 1000 Lumens with diffuser one feet version suitable for surface/wall mounting complete with all accessories pre-wired and including connecting up with twin core twisted flexible copper conducotr cable with suitable size complete all as specified and as directed Make : CG cat part no. LCL-10-CDL (LINNET)/Bajaj / Philips / Surya Roshni Ltd / Wipro / GE / Hevells / Simco / HPL / Jaquar

Ceiling rose surface bakelite 65 X 50mm two to three terminals complete all as specified and as directed. Make : Cona / Anchor / Legrand

In repairs, Copper tubing 24 SWG of size 3/8" along with tubular insulation suitable for 2 TR Split AC complete all as specified and as directed.

In repairs, Copper tubing 24 SWG of size 5/8" along with tubular insulation suitable for 2 TR Split AC complete all as specified and as directed.

Earthing complete with galvanized steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to GI wire 4mm dia (up to 7.5 m in length from earth plate) by means of bolts and nuts checknuts and washers of galvanized iron or steel all as specified and shown in electrical plate no.3 of SSR part I including Charcoal and rock salt with necessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 40 mm thick cover with MS rod 8mm dia 150mm long reinforcement, watering funnel, 40 mm dia light grade for protection of earth electrode 20 mm dia for watering and pouring extra Clay Soil of qty not less than one cubic meter into the earth pit and also removal of excavated soil not less than 50 mtr from the earthing place all as specified and directed by E-in-Charge complete all as specified and as directed.