Repairing/Renovation of I.T.I Building at TANKARA, Dist. Morbi ( By providing Ots Sheet Rooftop, General Plumbing, Vitrified Tiles, Plaster, color, Door-Window etc.)

Name of Work :-Repairing/Renovation of I.T.I Building at TANKARA, Dist. Morbi ( By providing Ots Sheet Rooftop, General Plumbing, Vitrified

Tiles, Plaster, color, Door-Window etc.)

=// Bill of Quantities //-

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Figure Rs. In Words Accourding to

1 5.00 Dismantling santtary fittings like wash basin . W.C. pan Indian and European type, flushing Each 414.23 Rupees Four Hundred Estimated

tank etc. including stacking the materials with all lead and lift. Fourteen Paise Twenty

2 432.00 Dismentaling tiled of stone floors laid in mortar including stacking of serviceable materilas SqM 49.12 Rupees Fourty Nine Paise

and disposal of unserviceable materials with all lead and lift. Twelve Only

3 6773.00 Removing dry or oil bound distemper by a washing and scraping and sand papering the wall Sqm 11.53 Rupees Eleven Paise Fifty

surface smooth including necessary repairs to scratches complete. Three Only

4 1822.00 Removing dry or oil bound distemper by a washing and scraping and sand papering on SqM 13.21 Rupees Thirteen Paise

ceilings and sloping roofs smooth including necessary repairs to scratches complete. Twenty One Only

5 108.00 Removing and scraping of old deteriorated plaster of any thickness fromm wall / R.C.C SqM 19.89 Rupees Nineteen Paise

member including stacking of serviceable material and disposal of unserviceable from site Eighty Nine Only

of work with all lead and lift.

6 191.00 Scraping oil paint from steel and other metal surface and making the surface even (with Sqm 51.78 Rupees Fifty One Paise

Hand Scraping.) Seventy Eight Only

7 108.00 Providing 15mm thick cement plaster in single coat on Rough (Similar)side of single or half Sqm 141.48 Rupees One Hundred

brick walls for interior plastering upto floor two level and finished even and smooth in (iii) Fourty One Paise Fourty

Cement mortar 1:6 (1-cement:6-sand) Eight Only

8 6000.00 Applying two coats of Birla or Asian acrylic lapy ( putty) & two coats of primer of SqM 40.59 Rupees Fourty Paise Fifty

approved brand and manufacture on new wall surface to give an even shade including Nine Only

thoroughly brushing the surface free from mortar dropping and other foreign matter and

sand papered smooth.

9 6000.00 Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture SqM 84.37 Rupees Eighty Four Paise

on undecorated wall surface to give an even shade including throughly brushing the surface Thirty Seven Only

free from mortar droppings and other foreign matter and sand papered smooth.

10 2596.00 Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) to SqM 120.26 Rupees One Hundred

give an required shape even shade after thoroughly brushing the surface to remove all dirt, Twenty Paise Twenty Six

and remains of loose powdere materials.etc complete Only

11 5.00 Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe ( SCH- 40) for Rmt. 91.84 Rupees Ninety One Paise

cold water including fittings as approved by Engineer In Charge. Pipe shall be fixed on the Eighty Four Only

wall with the help of clamp at every two metre C/C or shall be concealed as directed

including necessary fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Figure Rs. In Words Accourding to

12 5.00 Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe ( SCH- 40) for Rmt. 148.12 Rupees One Hundred Estimated

cold water including fittings as approved by Engineer In Charge. Pipe shall be fixed on the Fourty Eight Paise Twelve

wall with the help of clamp at every two metre C/C or shall be concealed as directed Only

including necessary fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

13 5.00 Providing laying and jointing in true line and level 50mm dia. U.P.V.C. Pipe ( SCH- 40) for Rmt. 195.67 Rupees One Hundred

cold water including fittings as approved by Engineer In Charge. Pipe shall be fixed on the Ninety Five Paise Sixty

wall with the help of clamp at every two metre C/C or shall be concealed as directed Seven Only

including necessary fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

14 50.00 Providing, laying and jointing in true line and level 160 diametre U.P.V.C (Type B) Rmt. 834.38 Rupees Eight Hundred

conforming to IS 13592-1992 with one end plain and other end socketed with rubber ring, Thirty Four Paise Thirty

& fittings conforming to ISI 14735-1999 of approved make for drainage system pipe line, Eight Only

pipe shall be jointed with each other with rubber lubricant, pipe shall be fixed on wall using

of PVC clamp of the size 160 mm diametre x 210 mm length x 196 mm heigh at every

mm center to center or shall be concealed in walls as directed including necessary fittings

such as bends, shoes etc. including testing of pipes and joints and jointed with adhesive

solvent cement including cost of all materials.

15 92.00 Providing, laying and jointing in true line and level 110 diametre U.P.V.C (Type B) Rmt. 876.90 Rupees Eight Hundred

conforming to IS 13592-1992 with one end plain and other end socketed with rubber ring, Seventy Six Paise Ninety

& fittings conforming to ISI 14735-1999 of approved make for drainage system pipe line, Only

pipe shall be jointed with each other with rubber lubricant, pipe shall be fixed on wall using

of PVC clamp of the size 110 mm diametre x 149 mm length x 145 mm heigh at every

mm center to center or shall be concealed in walls as directed including necessary fittings

such as bends, shoes etc. including testing of pipes and joints and jointed with adhesive

solvent cement including cost of all materials.

16 25.00 Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure polythene Rmt. 280.23 Rupees Two Hundred

pipes of the following outside Dia. Low densidy, complete with special falnge compression Eighty Paise Twenty Three

type fittings, wall clipsetc. including making good the wall ceiling and floor.(F) 75mm Only

17 5.00 Providing and fixing C.P. brass waste for washbasin or sink. (B) 40mm dia. Each 89.83 Rupees Eighty Nine Paise

Eighty Three Only

18 50.00 Providing and fixing screw down bib taps of following size.(B) Brass chromium plated Each 186.83 Rupees One Hundred

screws down Bib Tap. (i) 15mm dia. Eighty Six Paise Eighty

19 16.00 Providing and fixing pillar tap, capstan head, screw down high pressure with screws, Each 354.69 Rupees Three Hundred

shanks and back nuts. (ii) 20mm dia. Fifty Four Paise Sixty Nine

20 30.00 Providing and fixing brass screw down stop tap.(A) 15mm dia. Each 205.83 Rupees Two Hundred Five

Paise Eighty Three Only

21 10.00 Providing and fixing Gun metal check or non-return fullway wheel valve.(A) 15mm dia Each 186.83 Rupees One Hundred

Eighty Six Paise Eighty

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Figure Rs. In Words Accourding to

22 10.00 Providing and fixing Gun metal check or non-return fullway wheel valve.(C) 25mm dia. Each 420.63 Rupees Four Hundred Estimated

Twenty Paise Sixty Three

23 12.00 Providing and fixing chromium plated brass half trun flush cock of approved quality Each 254.78 Rupees Two Hundred Fifty

including fixing in pipe line etc. complete.(i) 20mm dia. Four Paise Seventy Eight

24 16.00 Providing and fixing 600mm x 450mm bevelled edge mirrror of superior glass mounted on Each 859.41 Rupees Eight Hundred Fifty

6mm thick A.C. sheet or plywood sheet and fixing to wooden pluge with C.P. brass screws Nine Paise Fourty One Only

25 5.00 Providing and fixing washbasin with single hole for pillar tap with C.I. or M.S. brackets Each 1581.77 Rupees One Thousand Five

painted white including sutting holes and making good the same but excluding fittings.(A) Hundred Eighty One Paise

Vitreous China:(ii) Flat Back washbasin 550 mm x v 400mm size. (i) In white colour. Seventy Seven Only

26 205.00 Providing and laying broken chine mosaic flooring for terrace using 12 mm to 20 SqM 779.70 Rupees Seven Hundred

mm broken pieces of glazed tiles to be laid over cement mortar 1:3 to plain or slope and to Seventy Nine Paise Seventy

be tempered to bring mortar creme out upto surface using white cement including Only

rounding off junctions and extending them upto 15 cm along the wall,clearing with water

and oxalic acid etc. as directed.

27 205.00 Providing and laying cement concrete flooring 1:2:4 (1-cement : 2-coarse sand : 4-graded SqM 339.08 Rupees Three Hundred

stone aggregate 20mm nominal size) laid in one layer and finished with a floating coat of Thirty Nine Paise Eight

neat cement. (B) 50mm thick. Only

28 12.00 Providing and laying Mirror polished Machine polished Granite stone slab 18 mm SqM 3143.12 Rupees Three Thousand

(Average) thick for For Doors / WIndows cill & Jams Clading as per design incl. full One Hundred Fourty Three

moulded round front edge in trade of steps laid on 20 mm thick cement mortar 1:6 (1 - Paise Twelve Only

cement : 6 coarse sand ) jointed with grey cement slurry including rubbing and polishing

29 50.00 Providing and laying white glazed tiles 6mm thick in skrting risers of steps and dedo on SqM 1127.48 Rupees One Thousand One

10mm thick cement plaster 1:3 (1-cement : 3-coarse sand) and jointed with white cement Hundred Twenty Seven

slurry Paise Fourty Eight Only

30 165.00 Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in flooring treads of steps SqM 1120.36 Rupees One Thousand One

and landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3-coarse sand ) Hundred Twenty Paise

finishing with flush pointing in white cement. Thirty Six Only

31 5.00 Providing and fixing 3 track Aluminium frame Window with two glass sliding shutters & 1 SqM 4452.69 Rupees Four Thousand

mosquito net shutter and fixed window frame size 63.55 mm. x 38.10 mm. having weight Four Hundred Fifty Two

1.094 Kg./ Mt. shutter frame vertical size 44.45 mmm. x 47.62 mm having weight 1.505 Kg. Paise Sixty Nine Only

/ Mt. and horizontal size 63.50 x 38.10 mm. having weight 1.608 Kg. / Mt. with 5 mm. thick

plain glass or 12 mm. thick Bison panel with necessary closer, fixtures and fastening rubber

biding clips etc. complete.

32 7.00 Steel work, riveted in built up sections framed work including cutting, hoisting, fixing in Qntl. 6747.08 Rupees Six Thousand

position and applying a priming coat of red lead paint. (D) In trussses and trussed purlins, Seven Hundred Fourty

upto 25 M. span and 15 M ovarall height. Seven Paise Eight Only

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Figure Rs. In Words Accourding to

33 69.00 Providing and Fixing Roof panel shall be made out of 0.5 mm thick precoated sheet. The Sqm 712.05 Rupees Seven Hundred Estimated

precoated sheet shall be of minimum 240mpa steel grade conforming to IS 14246-1995 and Twelve Paise Five Only

shall have zinc coating of minimum 120 gsm as per IS 277-1992, 5-7 microns epoxy primer

on both side of sheet and polyester top 15-18 microns. The PPGI sheet shall have plastic

protective guard film of minimum 25 microns to avoid scratches during transportations. The

sheet should be fixed to the steel member by pop rivets or self drilling / self stiching fastners

@ maximum 450 mm c/c along the length of capping / flashing etc. complete.

34 10.00 Providing & fixing stainless steel (stainless steel plate of 302 No. ) letter of 45c.m. size No 1939.81 Rupees One Thousand Nine

finished with radium sticker including necessary scaffolding for fixing with epoxy material Hundred Thirty Nine Paise

etc. comp. as directed by engineer in charge (Additional Article of Gujarati letter are Eighty One Only

consider as a half letter)

35 292.00 Painting two coats and one priming coat steel and other metal surface with Chemical and Sqm 130.95 Rupees One Hundred

Corrosion resistance epoxy paint including preparing the surface by throughly cleaning, Thirty Paise Ninety Five

oil,grease, dirt and other foreign matter and scoured with brushes fine steel wood, scrapers Only

and sand paper with. complete as directed by Engineer-in-charge.

36 109.00 Reapirs and Re-fitting of doors, window and Cup Board shutters by providing necessory Sqm 1313.05 Rupees One Thousand

teak wood member, glass/Acrylic sheet and necessry hardware fitting and including Three Hundred Thirteen

touching the new member by matching existing oil painting, shed etc. complete as directed Paise Five Only

including all cost of labour and materials.

37 317.00 Repairing of existing aluminium section doors /windows/partitions including replacement of Sqm 1074.64 Rupees One Thousand

damaged sections, tightening of loose fittings, renewal of accessories, and ensuring proper Seventy Four Paise Sixty

alignment and smooth functioning of shutters. Four Only

38 191.00 Providing and Fixing Impulse Blackout Roller Blinds with fabric of 0.53mm thickness and Sqm 1768.51 Rupees One Thousand

Top channel of non-rusting aluminium alloy with 1.25mm thickness and bottom channel of Seven Hundred Sixty Eight

1.50mm thickness & 21mm diameter. Tilt channel of ABS plastic with 1.50mm polys Paise Fifty One Only

39 191.00 Providing and fixing weather and abrasion-resisting Bird Protection Net of Garware or Sqm 186.85 Rupees One Hundred

equivalent Brand made from High grade Synthetic Material 0.35mm Thick and 1.5mm twine Eighty Six Paise Eighty

Fixed with SS hook, anchor Bolt, screw eye etc. complete as directed by Engineer in charge. Five Only

Amount in Words :

Rupees Twenty Nine Lakh Fourty Thousand Five Hundred Fifty Two Paise Sixty Five Only

I / We am/are willing to carry out the work at ......................................................………………... % above / below (Should

be written in figures and words) of the estimated rates mentioned above. Amount of my/our tender works out as under.

Estimated amount Estimated amount

Put to tender Rs. …………………… Put to tender Rs…………………..

Add……….. % above Rs. …………………… Deduct…….% below Rs…………………..

Total Rs. …………………… Net Rs…………………..

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Figure Rs. In Words Accourding to

In words……………………………… In words………………………………………. Estimated

[1] The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which no extra payment shall be made.

[2] The labourcess will be deducted as per prevailing rules i.e. 1% of the work done.

[3] GST and Income tax TDS will be deducted at a source while making payments of bills

[4] In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R.

therefore in R.C.C. items where there is a change as per actual mix design the cost of difference of cement consumption have been deducted from the rate of original item at the rate of

input rate mentioned in all the tender.

Signature of Contractor

Deputy Executive Engineer Executive Engineer

R & B Sub Division R & B Division