Appointment of an agency for Design, Site Preparation, Supply, Installation, Testing, Commissioning, Operations and Maintenance of Basic Infrastructure for the establishment of Data Centre at IIT Delhi, Sonipat Campus

Electrical Panels and Distribution board : All floor mounted panels shall be of form 3B construction. All ACB/MCCB upto 250 A shall be thermal magnetic release and above 250A shall be microprocessor based release with Overload, short circuit and earth fault release. Supply, Installation, Testing and Commisioning of Following Panels and DB's with proper gauge MS sheet and shall comply with IS standards. All Panels should connected with earthing system.

HT tapping unit with CT, PT & DO fuse set

Distribution Transformer 2000 kVA, 11kV/433V, ∆ to Y ONAN type

HT panel

DG Control panel

LT Panel

LT Distribution panel

Floor PDU with Isolation transformer

HVAC panel

Chiller pump panel

UPS output panel

Power DB-1

500kVAr Capacitor Panel with APFCR & accessories

PAC Panel

Power DB

UPS Output DB for Non IT UPS

Light DB

Utility DB

Pump DB

Chiller ATS

Pump ATS

PAC ATS

Supply, installation, testing & commissioning of online IT UPS solution operating on 415V, 50 Hz, 3 phase input and 3 phase+N output with galvanized isolation, interconnecting suitable size copper cables between UPS & batteries,UPS input switch & UPS outgoing switch & UPS,UPS body & Body Earth,UPS neutral & neutral Earth as per actual site requirements.

Supply, installation, testing & commissioning of battery bank for IT Online UPS solution for providing end of life backup time of 10 mins & battery charger, battery stand with enclouser.

Supply, installation, testing & commissioning of online non-IT UPS operating on 415V, 50 Hz, 3 phase input and 3 phase+N output with galvanized isolation, interconnecting suitable size copper cables between UPS & batteries,UPS input switch & UPS,UPS outgoing switch & UPS,UPS body & Body Earth,UPS neutral & neutral Earth as per actual site requirements.

Supply, installation, testing & commissioning of battery bank for non-IT Online UPS for providing end of life backup time of 10 mins & battery charger, battery stand with enclouser.

Diesel genrator 1000 KVA

Supply, Erection, Testing and Commissioning of following KVA 415V, 3phase 50HZ, 4 wire Radiator cooled following rating DG set . The Diesel Engine shall be complete with necessary control and safety devices as per IS/ BS specifications. The Engine shall be suitable for continuous operation of Generator duty, inclusive of Flywheel, flexible coupling, air cleaner, corrosion resistor, Radiator, fan with guard, Fuel pump,fuel filter, Electronic governor, starting system with separate Battery charger with 2nos 24Vsealed Maintenance Free Batteries, Voltage regulator, Instrument panel with RPM Indicator, Exhaust silencer(residential), protections against Low Lub. Oil pressure, high water temperature with required supports, brackets and clamps, battery stand, anti vibration pads and first filling of lubricating oil and fuel oil for set. The Alternator shall be suitable for415V 3phase, 4wire, 50HZ AC supply operation and shall be able to deliver full load current at 100% Unbalance load. The set shall be supplied with acoustic enclosure as per CPCB norms.

Supply of exhaust piping of following sizes MS B Class exhaust pipes conforming to IS:3589 with welding joint including bends, clamps, dash fastener, flanges, nuts, bolts etc. complete requirement suitable for 1010 KVA DG's with aviation light & required accessories.

Electrical Cables: (a) Effecting proper and adequate connections at terminations. (b) Ensuring that provision is left in building components and trenches as the work proceeds for incorporation of cable supports at a later date. (c) Providing all fixing accessories such as clamping devices, Tie's, nuts and bolts, screws where laid in trenches or trays.(Not to consider Trays and Trenches rates, it will be paid Seperatly) (d) Providing proper supports for cable terminal boxes . (e) Providing heavy duty copper lugs, insulation tape etc. at joints and terminations. (f) All fixing accessories such as GI saddles, screws, raw plugs, suitable size Anchor Fasteners etc. (g)Cutting chases, holes and making good the same wherever required. (Not Valid for any Concrete Slab) (h)Testing of the Cables in the Manufactures works and providing test certificates with the handover documents is the sole responsibility of the Contractor.

3C x 300 Sq mm AL Arm XLPE, 11 KV HT Cable (Length upto)

4C x 300 Sq mm AL Arm XLPE, 440V LT Cable (Length upto)

4C x 240 Sq mm AL Arm XLPE, 440V LT Cable (Length upto)

1C x 120 Sq mm Cu Arm FRLS, 440V LT Cable (Length upto)

4C x 70 Sq mm AL Arm FRLS, 440V LT Cable (Length upto)

4C x 50 Sq mm Cu Arm FRLS, 440V LT Cable (Length upto)

4C x 40 Sq mm AL Arm FRLS, 440V LT Cable (Length upto)

4C x 10 Sq mm Al Arm FRLS, 440V LT Cable (Length upto)

1C x 10 Sq mm Cu Flexible, 440V LT Cable (Length upto)

1C x 2.5 Sq mm Cu Flexible, 440V LT wire RYB for point wiring (Length upto)

1C x 1.5 Sq mm Cu Flexible, 440V LT wire RYB for point wiring (Length upto)

Terminations for Cable

3C x 300 Sq mm AL Arm XLPE, 11 KV HT

4C x 300 Sq mm AL Arm XLPE, 440V LT

4C x 240 Sq mm AL Arm XLPE, 440V LT

1C x 120 Sq mm Cu Arm FRLS, 440V LT

4C x 70 Sq mm AL Arm FRLS, 440V LT

4C x 50 Sq mm Cu Arm FRLS, 440V LT

4C x 40 Sq mm AL Arm FRLS, 440V LT

4C x 10 Sq mm Al Arm FRLS, 440V LT

Bus-bar trunking (BBT) (a) Supplying, installation, testing and commissioning of continuous access copper conductor track busway system, Indoor type application having IP3X rating, insulation, suitable for use on 3 phase 4 wire 415 volts, 50Hz A.C. supply with aluminium housing, maintenance free system, necessary joints & expansion joints, provision of tapping the plug in box without deenergize the busbar, including all the necessary components like clamping brackets/ suspenders, fasteners, accessoris for mounting screws, complete as required. Bolting and tourqing should not be accepted. (b) Note : The Bends & Joints shall not be measured separately, and shall be considered as straight pieces & measured along the centre line of BBT

800A,415V TP+2N Cu.Continuous access busbar

End Feed Unit Standard lugs, Large box with CPM Standard Left Lid, Reverse unit

End Caps

Housing Coupler

Hanger Bolt

Closure strip, 3 mtr per length

Supply, Installation, Testing & commissioning of following powder coated Tap OFF Boxes with IP 55 rating complete as per technical specifications, relevant standards, and direction of Engineer in charge. Tap off Unit with 63A, 415V TP+N MCB, D curve industrial type 5pin plug & socket of 2 Nos- 63A, 415V AC suitable for bus trunking system.

Cable Tray : (a) Supply and Installation with all nescessary supports and hardware. (b) The work should be carreid out as specified in the specification sheet. (c) Colour of the Trays has to be confirmed by the customer.

100mm x 1000 mm wide perforated Type Cable Tray

50mm x 600 mm wide perforated Type Cable Tray

50mm x 300 mm wide perforated Type Cable Tray

50mm x 450 mm wide Basket Type Cable Tray

50mm x 150 mm wide Basket Type Cable Tray

Earthing and earthing strips : (a) All earth pits shall be as per IS 3043 with latest amendments. (b) Earthing stations should contain relevant grade of charcoal/coke and salt packed around the earth plate/earth pipe as called for in the item. (c) Earthing shall be done at indicted location by the Consultants. The minimum distance between the two earth station shall be 3 meters and that from the building is 2500 mm. (d) An earth ring with relevant earth test terminal boxes shall to be provided at regular intervals. (e) Adequate number of earth strips with proper sized holes shall be provided for extending earthing/looping earth connections at various floors shall be provided and executed as per the requirement. (f) The Contractor has to provide heavy duty Cover of size 450 x 450 x 8 mm thick to the Earthing Chamber. (g) The cover is to be sand blasted and then Powder coated using Matt Jet Black Colour. The Cover is to be fabricated using 8 mm thick Chequered Plate.

Chemical Earthpits / Maintenance free Earthpits having better Earth Resistance value. This shall be for Data Centre including UPS. Bidder to make sure to achieve required earth resistance of < 1 Ohm.

6 sqmm green cable

25 x 3 copper Strip for Earthing of panel & DC LU grid

50 x 6 copper Strip for Earthing of panel

50 x 6 GI Strip for Earthing of panel

75 x 10 GI Strip for Earthing of panel

1c x 185 sqmm cu flexible (Green Colour)

Termination of 1c x 185 sqmm cu flexible (Green Colour)

Dedicated Earthing Box with 50mm x 10mm x 200mm Length,Tinned copper strip with 16mm holes

150x150x3mm Danger Notice Board & 415 Enameled Danger Board

150x150x3mm Danger Notice Board & 11kV Enameled Danger Board

1000 x 1000 mm wide 2.5mm thick Rubber Matting suitable for 1100 Grade

Light and Power point Wiring

Modular switch board with switches and sockets for wall

Modular switch board with switches and sockets for Desk

MS Conduit with accessories

PVC conduit with accessories

Smart LED Lights Square 2'x2'

Smart LED lights Square 1'x1'

Occupancy sensor range 6-7 meter

Flexible MS conduit

Flexible PVC conduit

BMS system

SITC of GUI based Building Managament software application

Rack Server with windows server OS, storage space required for log & audit history data and all required accessories

PC for Client work station with all accessories and windows OS

DDC Panel

SITC of supervisory controllers with accessories & power supplies

SITC of field level direct digital controllers with accessories & power supplies

Temperature & Humidity sensors

24 port Network Switch 100/1000 BASE-T

SITC of 2C*1.5 sqmm sheathed flexible cable with all accessories

SITC of 25 mm PVC conduits and complete related accessories

DCIM System

DCIM software

Field Controler and convertors with accessories

Power Supply unit 24 VDC 5 Amp

Power Supply unit 12 VDC 5 Amp

Networking cable

Network switches

Sensors

PC with accessories for DCIM system

Fire Alarm System & Fire Extinghuishers

Intelligent Addressable Fire Alarm Control panel with 2 Loop Capacity expandable up to 2 loops in future. The panel shall consisting with 80 character LCD display and RS 485 for networking. Each Loop should have the capacity to cater to 125 devices and 125 detectors per Loop. The vendor shall consider the necessary (if required) interface modules, integrators etc and all module necessary for successful operation and BMS integration of the complete system as per the site requirement.

Detector (multicriterion)

Heat Detector

Manual Call Point

Control Modulte/ relay module

Fault isolator Module

Monitor Module

Hooter

2 Core 1.5sq.mm armored cable

Response Indicator

Batteries for FAS panel

Fire extinguisher 2 Kg ABC type

Fire extinguisher 4 Kg DCP type

Fire extinguisher 4.5 Kg corbon dia-oxide (CO2) type

Related all other accessories to complete the solution

Access control system

Access Software Application with a client license

Electro Magnetic Lock (600Lbs)

Electro Magnetic Lock (1200Lbs)

Access Reader (Mifare cards)

Access Card compatible with Access reader (Mifare)

2 door/ 4 Reader Access controller with power supplies

Push Button

Emergency Door Release Switch

5 Amp 12V Power Supply

10 Amp 12V DC Power Supply

4 Core 1sq.mm. (Sheathed Cable)

8 Core 1sq.mm. (Sheathed Cable)

Network Cat 6 Cable

Rack Server with windows server operating system and MS-SQL server for access software application

Water leak detection system

4/6 Zone WLD Pannel for Server farm area and UPS room with BMS integration feature.

Water Leak Sening Cable with end connections

Alarm modules for constantly monitoring the cable and sends the alarm to panel.

Termination caps

PVC Junction Box

2 x 1 sq mm sc Un Armoured Cable for BMS integration

PVC Conduit 25mm including all fittings.

Very early smoke detection system

Aspirating Smoke Detection Unit with 2 tube inlets capable of LED indicator bar 3 relay output, single detector chamber, smoke detector sensitivity range 0.025 - 2.00% obs/m (0.008 - 0.625% obs/ft). - for Server Farm Area and UPS room

Capillary Tube with accessories

Sampling Point for Capillary tube end & label

Power Supply unit 24 VDC 5 Amp

PVC Conduit including all fittings 25mm/1 inch

Gas based suppression system

80 Litre Seamless Cylinder PESO/ CCOE Approved, complete with valve assembly and a pressure gauge with a safety burst disc and a safety cap.

Novec 1230/ FK-5112 Agent per KG

Electric Cum Manual Actuator

Pneumatic Actuator

Discharge Hose

Actuation Hose

Warning Sign Plate

Discharge Nozzle

Manifold Check Valve

M S Container Strap

Manifold fabricated from seamless pipe Pipe (S) : M.S. Seamless To ASTM A-106, SCH. 80

C.S./M.S. Seamless Piping, fittings (forged screwed/socket weld upto 50NB) & M.S. supports e.g. angle, channel, plates clamps, etc. As per ASTM A-106, SCH. 40.

Gas release 4 zone panel

Gas based suppression system

Software (RRS)

Rodent Repellent Controller

Satellite Transducer

Cables for connectivity between transducer & Controller

PVC Junction Box

PVC Conduit 25 mm including all fittings

Brackets MS Power Coated

PC or workstation with complete accessories for RRS monitoring application

230KW, 415 V, 3 phase, monitor level intelligent PDU

CCTV Solution

IP Dome Camera (Onvif Profile S&G Compliantwith all accessories)

IP Bullet Camera (Onvif Profile S&G Compliant with all accessories)

Video Mangement Software (with 25 Camera License)

POE Switch 24 Port

POE Switch 8 Port

Cat 6 Cable with RJ 45 Connectors

PC System With 43"inch LCD Monitor & all required accessories (For Client)

Rack Server (For VMS With Latest window server operating system Data Center Edition)

100 TB NAS Storage (with all accessories)

HDMI Cable (5 meter)

UPVC pipe 25 mm

PA system

Amplifier 75 Watt x 220Volt

Goose Neck Microphone Table Type With ON/OFF Button With Base/Stand.

Wall Speaker 60 Watt

Ceiling Speaker 40 Watt

2 Core 1.5 sq.mm Armored Cable

25 mm MS Condute ISI Mark

HVAC High & Low side

Air cooled Chiller of 53 Tr capacity

Chiller Plant manger software with controllers, cables PC & related accessories

Chiller low side work with pumps and realeted accessories

Direct expansion microprocessor based Precision A/C units (30 Tr)

PAC Low Side Work

Comfirt air conditioners (5.5 Tr ductable/VRV as per requirement)

CAC Low side work

Cold aisle containment

Fire exhuast system with dampers for server farm

Exhuast frills with dampers form electrical rooms

RDHX with accessories

Racks with accessories

Civil work

HT & LT room creation

Transformer foundation & releted work

Road crossing work

Server farm work

LT room work

DG foundation

Fuel storage & HSD tank

Chiller platform and related work

Tranches

Work stations for BMS & NOC room

Any other item required to make the package/work complete (Bidder has to specify item wise)

Project Monitoring ,Management & Documentation

Kyndryl Solutions Private Limited

PRASA INFOCOM AND POWER SOLUTIONS P LTD