REPAIR AND MAINT OF WOODEN, CANING FURNITURE AND MISC ITERMS AT AF STATION JODHPUR UNDER GE (AF) NO 2 JODHPUR

Amount

CHAIR DINING - FD-228,262,279 & 1105 :- S & F of following existing old broken wooden components of chair dining similar items carefully without disturbing the adjoining parts and new components made out of first class Indian Teak wood in lieu of dismantled components including tightening the joints, pinning, screwing, nailing, glueing,placing every part in-tact all as specified in Drg and directed by Engr - In Charge.

Top back rest

Bottom leg stiffener

Front legs

Rear Legs

Seat Member/Seat Rail

Rubber/PVC shoes

M&L for preparation of wooden surfaces of chair dining by scraping with sand paper, redusting and apply putty wherever required and polishing the surface with french polish to get glossy finish all as directed by Engr-in-Charge.

CHAIR EASY: FD-229 & 358 :- S & F of following existing old broken wooden components of chair Easy similar items carefully without disturbing the adjoining parts and new components made out of first class Indian Teak wood in lieu of dismantled components including tightening the joints, pinning, screwing, nailing, glueing,placing every part in-tact all as specified in Drg and directed by Engr - In Charge.

Rear legs

Front Legs

Seat bottom Rail

Seat Member/ Seat Rail

Back Member/ Back Rail

Rubber/PVC shoes

M&L for preparation of wooden surfaces of chair Easy by scraping with sand paper, redusting and apply putty wherever required and polishing the surface with french polish to get glossy finish all as directed by Engr-in-Charge.

CHAIR WRITING:-FD-250, 261, 280 & 1107 :- S & F of following existing old broken wooden components of chair writing similar items carefully without disturbing the adjoining parts and new components made out of first class Indian Teak wood in lieu of dismantled components including tightening the joints, pinning, screwing, nailing, glueing,placing every part in-tact all as specified in Drg and directed by Engr - In Charge.

Back rest

Bottom Leg Stiffener

Front Legs

Rear Legs

Seat Member/ Seat Rail

Rubber/PVC shoes

M&L for preparation of wooden surfaces of chair writing by scraping with sand paper, redusting and apply putty wherever required and polishing the surface with french polish to get glossy finish all as directed by Engr-in-Charge.

RECANING OF WOODEN CHAIRS:- M&L for removing old unserviceable plastic cane form wooden chair and providing new white colour plastic cane 2mm to 2.5mm wide 0.40mm thick for weaving and 4mm wide plastic cane of 0.60mm thick for border work suitable for following description of chairs( weaving shall be Godrej pattern) and all as directed by Engr-in-Charge and as shown on drg .

Chair Dining:- FD-279,262,228,1105

Chair Writing:-FD-261,280,250,1107

Chair Easy:-FD-229,358

REPAIR OF CHAIR DINING (MAP) (FD/MAP-II/04) M & L removing UNSV & S & F the following existing wooden components from Chair Dining (MAP) carefully without distrubing the adjoining parts made of first class Indian Teak wood well seasoned free from pits & knots including tightening the joints, pinning, screwing, nailing, welding, glueing, placing every part in-tact complete all as specified and directed by the Engr-in-Charge.

Cushion 75mm thick 40 density including 12mm thick BWR ply wood fixed with as per existing pattern, duly covered with tapestry cloth not less than Rs 300 per mtr quality and shade as approved by Engr -in-Charge/GE and all as specified and directed by the Engr-in-Charge.

Front leg

Rear leg

Seat Rail

Bottom stiffiner

M & L for preparation of wooden surface of Chair Dining (MAP) by scraping with sand paper, redusting and apply putty wherever required and polishing the surface with french polish two coats to get glossy finish all as specified and as directed by Engr-in-Charge.

REPAIR OF TABLE BED SIDE (MAP) (FD/MAP/07)

M & L for removing old UNSV drawer with telescopice channel from table bed side and S & F new drawer made out of 12mm thick both side pre laminated particle board exterior grade for sides and 18mm thick both sides pre laminated particle board exterior grade colour shade matching with existing board for front & back of drawer including 12" long telescopic channel heavy duty for both side of drawer duly fixed suitable screws and all as specified and directed by Engr-in-Charge.

M & L for removing old UNSV left or right side from table bed side and S & F new left or right side made out of 18mm thick both sides pre laminated particle board exterior grade colour shade matching with existing board duly fixed with suitable screws/nails and all as specified and directed by the Engr-in-Charge.

M & L for removing old UNSV cabin shutter from table bed side and S & F new shutter made out of 18mm thick both sides pre laminated particles baord exterior grade colour shade matching with existing board duly fixed with suitable hings matching with existing hinges fixed with screws/nails and all as specified and directed by the Engr-in-Charge.

M & L for removing old UNSV top or bottom from table bed side and S & F new top or bottom of 18mm thick both sides pre laminated particle board exterior grade colour shade matching with existing board duly fixed with suitable screws/nails and all as specified and directed by the Engr-in-Charge.

M & L for removing old broken handle from drawer / shutter of table bed side and S & F new S/S 'C' shape handle 50mm wide duly fixed with suitable machine screws and all as specified and directed by the Engr-in-Charge.

TABLE 3'X2' (900 X 600 X 760MM) WITH DRAWER/WITOUT DRAWER (FD-223/224/283/1007/1008)

Repair of table with or w/o drawer replacement of unserviceable top with commercial particle board BWR type Gde-I 19mm thick as per Drg of ISI Marked with IInd class HW teak wood beading 6mm thick including polishing (two or more coats over a coat of wood filler etc).

All as per Item No. 7.01 but replacement of table frames long rail with S&F new table frames long rail made out of IInd class hard wood complete all as shown on drawing and as directed by Engr-in-Charge.

All as per Item No. 7.01 but replacement of new drawer made out of IInd class hard wood (Teak Wood) with aluminium anodized 35mm/40mm dia knob complete all as shown on drawing and as directed by Engr-in-Charge.

All as per Item No. 7.01 but replacement of table frames short rail with S&F new table frames short rail made out of IInd class hard wood (Teak Wood) complete all as shown on drawing and as directed by Engr-in-Charge.

All as per Item No. 7.01 but replacement of bottom centre stiffener with S&F new bottom centre stiffener complete all as shown on drawing and as directed by Engr-in-Charge.

All as per Item No. 7.01 but replacement of new aluminium anodized 35mm/ 40mm dia knob complete all as shown on drawing and as directed by Engr-in-Charge.

All as per Item No. 7.01 but replacement of rubber shoes with S & F new rubber shoe of superior quality with steel plated screws of suitable size complete all as directed by Engr-in-Charge.

Supply and fixing in repair new legs made out with IInd class hard wood as per existing or as per Drg polishing with French polish (two or more coats) over a coat of wood primer after preparation of surface etc.

TABLE DINING 6 PERS (FD-239/273/115) Repair to table dining 6 pers including dismentalling/removal of all broken parts and replacing with new parts of well seasoned BWR Indian Teak wood free from pits & Knots as under complete all as specified under directed:-

Top made out of 18mm thick pre laminated particle board shade and texture as approved by engineer in charge with matching Indian Teak wood edging.

Long Rail

Short Rail

Indian Teak wood corner size 75mm x 75mm to table between legs and rails fixed with screw

Centre stiffner

Rubber/PVC shoes

Scratching the entire wooden pallets of peg table filling puty to the bore holes making surface smooth by scratching it with an electric grinder and shall be french polished in wallnut shade & finishing it with melamine top coat complete all as specified and under directed by Engr-in-Charge.

TABLE DINING 8 PERS (FD-239/273/115) Repair to table dining 8 pers including dismentalling/removal of all broken parts and replacing with new parts of well seasoned Indian Teak wood as under complete all as specified under directed:-

Top made out of 18mm thick pre laminated particle board shade and texture as approved by engineer in charge with matching Indian Teak wood edging.

Long Rail

Short Rail

Indian Teak wood corner size 75mm x 75mm to table between legs and rails fixed with screw

Centre stiffner

Rubber/PVC shoes

Scratching the entire wooden pallets of peg table filling puty to the bore holes making surface smooth by scratching it with an electric grinder and shall be french polished in wallnut shade & finishing it with melamine top coat complete all as specified under directed by Engr-in-Charge.

TABLE CENTRE (FD-235/274) The following repair shall be carried out to Table centre after removing old UNSV parts and replacing with new parts of well seasoned BWR Indian Teak wood free from pits & Knots as under complete all as specified under directed:-

Top made out of 18mm thick pre laminated particle board exterior grade with Indian Teak wood.

Long Rail

Short Rail

Centre stiffner

Rubber/PVC shoes

Scratching the entire wooden pallets of peg table filling puty to the bore holes making surface smooth by scratching it with an electric grinder and shall be french polished in wallnut shade & finishing it with melamine top coat complete all as specified and directed by Engr-in-Charge.

TEAPOY (FD-382/278) The following repair shall be carried out to Teapoy after removing old UNSV parts and replacing with new parts of well seasoned BWR Indian Teak wood free from pits & Knots as under complete all as specified under directed:-

Top made out of 18mm thick pre laminated particle board exterior grade with Indian Teak wood.

Rubber/PVC shoes

Scratching the entire wooden pallets of peg table filling puty to the bore holes making surface smooth by scratching it with an electric grinder and shall be french polished in wallnut shade & finishing it with melamine top coat complete all as specified and directed by Engr-in-Charge.

PEG TABLE (FD-277/384/237/1114) The following repair shall be carried out to Peg Table after removing old UNSV parts and replacing with new parts of well seasoned BWR Indian Teak wood free from pits & Knots as under complete all as specified under directed:-

Top made out of 18mm thick pre laminated particle board exterior grade with Indian Teak wood.

Rubber/PVC shoes

Scratching the entire wooden pallets of peg table filling puty to the bore holes making surface smooth by scratching it with an electric grinder and shall be french polished in wallnut shade & finishing it with melamine top coat complete all as specified and directed by Engr-in-Charge.

TABLE 3'x3' (900x900) (FD-88/291/1009) Repair to table dining 3'x3' (OR's) including dismentalling/removal of all broken parts and replacing with new parts of well seasoned Indian Teak wood as under complete all as specified under directed:-

Top made out of 18mm thick pre laminated particle board shade and texture as approved by engineer in charge with matching Indian Teak wood edging.

Long Rail

Short Rail

Indian Teak wood corner size 75mm x 75mm to table between legs and rails fixed with screw

Centre stiffner

Rubber/PVC shoes

Scratching the entire wooden pallets of peg table filling puty to the bore holes making surface smooth by scratching it with an electric grinder and shall be french polished in wallnut shade & finishing it with melamine top coat complete all as specified and directed by Engr-in-Charge.

TABLE CENTER TWO TIER (FD/MAP/08) The following repair shall be carried out to Table centre two tier after removing old UNSV parts and replacing with new parts of well seasoned BWR Indian Teak wood free from pits & Knots as under complete all as specified under directed:-

Top made out of 18mm thick pre laminated particle board exterior grade with Indian Teak wood.

Long Rail

Short Rail

Centre stiffner

Rubber/PVC shoes

Scratching the entire wooden pallets of peg table filling puty to the bore holes making surface smooth by scratching it with an electric grinder and shall be french polished in wallnut shade & finishing it with melamine top coat complete all as specified and directed by Engr-in-Charge.

TABLE DINING 4 PERSON (1200X900) FD/MAP/09) Repair to table dining 4 pers including dismentalling/removal of all broken parts and replacing with new parts of well seasoned Indian Teak wood as under complete all as specified under directed:-

Top made out of 18mm thick pre laminated particle board shade and texture as approved by engineer in charge with matching Indian Teak wood edging.

Long Rail

Short Rail

Indian Teak wood corner size 75mm x 75mm to table between legs and rails fixed with screw

Centre stiffner

Rubber/PVC shoes

Scratching the entire wooden pallets of peg table filling puty to the bore holes making surface smooth by scratching it with an electric grinder and shall be french polished in wallnut shade & finishing it with melamine top coat complete all as specified and directed by Engr-in-Charge.

REPAIR OF BED HARD M & L for removing old underviceable Ply wood top from Bed hard and S & F new plywood top 12mm thick BWR Gde type 'AA' of size 1900x850mm with suitable nut & bolt and all as specified and directed by Engr-in-Charge

M&L for removing old unserviceable particle board from head board and foot board of Bed hard and S&F new 18mm thick boath side laminated particle board exterior grade of size 640x200mm for head board & 640x310mm for foot board fixing with suitable steel screw and all as specified and directed by Engr-in-Charge.

M &L for preparation of wooden surfaces of Bed Hard by scrapping with sand paper, redusting and applying putty wherever required and policing the surface with french police to get glossy finish and all as specified and directed by Engr-in-Charge

REPAIR TO TABLE DRESSING LADIES (a) Dismantling taking out carefully and replacement of old existing broken top of table dressing ladies of any description in any position & replacement of the same with S&F new top of 18mm thick pre-laminated particle board exterior grade, BWR ISI marked made to shape fixed in position with teak wood veneered on one side & other side commercial all as shown on drawing, specified and as directed by Engr-in-charge.

All as per Item No. 17.00 (a) above but replacement of back plywood 6mm thick commercial ply all as specified and as directed by Engr in charge .Drg no FD 251/32

All as per Item No. 17.00 (a) above but replacement of unserviceable mirror 5.5mm thick with S&F new 5mm thick mirror 365x1220x5mm thick with complete frame all as shown in drawing and directed by Engr in Charge .Drg no FD 251/32

All as per Item No. 17.00 (a) above but replacement of chromium plate knob 25mm dia of best quality and as approved by Engr in charge .Drg no FD 251/32

REPAIR TO TEAPOY VARANDAH (FD-255):-Taking down old U/S top of teapoy varandah and S&F new top of teapoy varandah made of 18/19 mm thick pre-laminated particle board exterior grade ISI marked with 4 mm thick teak wood beading all-round of the top as specified and shown on Drg and as directed by Engr-in-Charge.

REPAIR TO SIDE BOARD (FD-241/ 371):-

Removal of old unserviceable/broken existing back of side board and S&F new back ply of 6 mm thick commercial plywood of existing size complete all as specified and shown on drawing ISI marked as approved by GE.

Two magnetic catch spring for shutter.

Removal of old unserviceable/broken bottom of side board and S&F new side of 18/19mm thick particle board BWR interior grade as per existing shape and size including 1mm thick laminated sheet to external surface of particle board of side board complete all as specified and shown in drawing ISI Marked as approved by Accepting Officer.

Removal of old unserviceable/broken shelf of side board and S&F new shelf of IInd class hard wood existing shape and size duly planned and smooth complete all as specified and shown on drawing and as directed by Engr-in-charge.

Removal of old unserviceable/broken top of 18/19mm thick particle board as per existing shape and size including 1 mm thick laminated sheet to external surface of particle board and complete all as specified and shown on drawing and as directed by Engr-in-charge.

Removal of old unserviceable/broken existing drawer of side board and S&F new drawer of IInd class hard wood of existing shape and size (7 inch x 15 inch x 0.5 inch) duly planned and smooth complete all as specified and shown in drawing.

Removal of old unserviceable Back side of side board and S&F new plywood 6mm thick as directed by Engr-in-charge.

All as per Item No. 19.01 above but replacement of chromium plate knob 25mm dia of best quality and as approved by Engr in charge .Drg no FD 251/32

REPAIR TO TABLE DRESSING GENTS (FD-230/ 379) 50 Nos. :-

Dismantling taking out carefully and replacement of old existing broken top of table dressing gents of any description in any position & replacement of the same with S&F new top of 01mm thick laminated sheet of approved shade over particle board 12mm thick and including 6mm thick teak wood beading all round made to shape fixed in position pasted with 01mm thick laminated sheet on top all as shown on drawing specified and directed by the Engr-in-Charge.

All as per Item No. 20.01 above but replacement of side S&F new side of 12 mm thick particle board, one side teak veneered and other side commercial exterior grade BWP with and including 6mm thick teak wood beading all-round, made to shape fixed in position all as shown on drg, specified and diredted by the Engr-in-charge.

All as per Item No. 20.01 above but replacement of bottom with S&F new 12 mm thick ply, teak veneered on one side and commercial on other side grade with (BWR Resin) made to shape fixed in position all as shown on drg specified and directed by the Engr-in-Charge.

All as per Item No. 20.01 above but replacement of mirror with S & F new mirror with teak wood frame 5.5mm thick mirror of SAINT GOBAIN/MODIGUARD/ATUL, complete all as shown on drawing and directed by Engr-in-Charge.

All as per Item No. 20.01 above but replacement of chromium plate knob 25 mm dia of best quality and as approved by Engr-in-Charge.

SOFA CHAIR SINGLE SEATER WITH ARMS FD-281/1113 : Removing UNSV and S & F the following existing wooden components from sofa chair single seater with arms carefully without distrubing the adjoining parts made of first class teakwood well seasoned free pits & knots including tightening the joints, pinning, screwing, nailing, welding, glueing, placing every part in-tact complete all as specified and directed by Engr-in-Charge.

Cushion 100mm thick 40 density duly covered wirh tapestry cloth not less thatn Rs 350 per mtr quality and shade as approved by Accepting Officer.

Batten

Bearer

M&L for preparation of wooden surfaces of sofa set single seater by scrapping with sand paper redusting and applying putty whereever required and policing the surfaces with french polish two coat to get gloosy finishing all as directed by Engr-in-Charge

SOFA SET THREE SEATER SINGLE PIECE FD-281/1113 : Removing UNSV and S & F the following existing wooden components from sofa set three seater carefully without distrubing the adjoining parts made of first class teakwood well seasoned free from pits & knots including tightening the joints, pinning, screwing, nailing, welding, glueing, placing every part in-tact complete all as specified and directed by Engr-in-Charge.

Cushion 100mm thick 40 density duly covered wirh tapestry cloth not less thatn Rs 350 per mtr quality and shade as approved by Accepting Officer.

Batten

Bearer

M&L for preparation of wooden surfaces of sofa set three seater by scrapping with sand paper redusting and applying putty whereever required and policing the surfaces with french polish two coat to get gloosy finishing all as directed by Engr-in-Charge

Vinayak Distributors

shekhar & company

AJAY TRADERS