8498/E8

Amount

Demolition of cement concrete in ground floor and paving n.exc 15 cm thick (below or above ground level) etc complete all as specifed and directed.

M&L PCC 1:2:4 type B-1 (Using 20mm graded stone agg) 25 mm thick in flooring complete all as specifed and directed.

M&L Non skid ceramic coloured tiles (300x300)x7 mm thick in floors etc. Set and jointed in neat slurry and pointed in white or coloured cement to match, over and including15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L Non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed or bedding layer of motar 15 mm thick laying floor finished in cement mortar 1:6 complete all as specifed and directed.

M&L Vitrified coloured tiles (600x600)x9/10mm thick in floors etc. Set and jointed in neat cement slurry and pointed in white or coloured cement to match and including over screed bed or bedding layer of mortar 15 mm thick laying floor finishes in cement mortor 1:6 complete all as specifed and directed.

M&L 18-20mm Machine cut kota stone slab flooring thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and includung 20 mm screed bed in cement mortar 1:6.

Taking down cement plaster on brick or stone wall etc incl raking out joints hacking for key scrubbing down with water complete all as specifed and directed.

M&L 10 mm thick rendering in cement mortar 1:4 on fair faces of brick or cement concrete surfaces finished even and fair without using extra cement complete all as specifed and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

M&L coloured glazed ceramic tiles (300x200) x6mm thick in wall set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick rendring on vertical surfaces in cement mortar 1:4 complete all as specifed and directed.

M&LGlazed coloured ceramic tiles in vertical surface 350x250mmx7mm/450X350X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match

M&L 75 mm thick cement concrete 1:5:10 type E-2, (Using 40 mm graded stone aggregate) as in sub base complete all as spd and directed.

M&L Prepolished chequered cement concrete tiles 30cmx30cmx25mm thick, set, jointed and pointed and in need cement slurry in floor with grey cement and pigment over and including screed bed or bedding layer of mortar 20 mm thick laying floor finished in cement mortor 1:6 complete all as spd and directed.

Supplied only glass dividing strips 3 mm thick and 38 mm wide and inserted in position to confirm design complete all as spd and directed.

M&L 40 mm thick cement concrete 1:2:4 type B-1, (Using 20 mm graded aggregate) as in floor, finishing cement concrete surface even and smooth with out using extra cement.complete all as spd and directed.

M&L 75 mm thick cement concrete 1:3:6 type C-2, (Using 40 mm graded aggregate) finishing cement concrete surface even and smooth without using extra cement as in plinth protection complete all as spd and directed.

M&L 15 mm thick rendering in cement mortar 1:6 on fair faces of brick or cement concrete surfaces finished even and smooth without using extra cement complete all as specifed and directed.

M&L 15 mm thick rendering in cement mortar 1:4 on fair faces of brick or cement concrete surfaces finished even and smooth without using extra cement complete all as specifed and directed.

M&L PCC 1:2:4 type B-1 (Using 20mm graded stone agg) as in lintel upto 1.5 m clear span, cills, steps, seismic and other similar articles ,bed plate copings & hold fast including form work etc complete all as specifed and directed.

M&L for precast cement concrete 1:2:4 type B-1, (Using 20 mm graded stone aggregate) as in landing, cover slab (for manholes etc) chullah woods, chajjas, water trough mangers, shelves, and similar articles with plain faces set in cement mortar 1:4 complete all as specifed and directed.

M&L TMT MS bars 10 mm dia and over, cut to length, bent to shape required including crancking bending spirally for hooping for col hooking ends and binding with and including mild steel wire non less than 0.9 mm dia securing with clips in quality complete all as specifed and directed.

All as per item No 21 above but 6mm to 8mm dia quality confirming complete all as spd and directed.

M&l 16 to 18 mm thick machine cut Granite (of any type) stone on top of cooking plateform and bar counter including cutting grinning polishing rounding edge etc, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone over and including 20mm screed bed in Cm 1:4.

Demolition of Precast concrete block walling, RR masonary in cement mortar including all quoins arches pillars etc complete all as specifed and directed.

M&L pre-cast cement concrete 1:3:6 type C-1 (Using 20 mm graded stone agg) block masonary with solid block exc 10 cm in width and setting in CM 1:6 etc complete all as specifed and directed.

Description all as per Srl item No.24 here in before but but except blocks

M&L walling of random rubble uncoursed well bonded bedded and solidly hearted in CM 1:6 complete all as specifed and directed.

All as per item No 27 above but except stone complete all as specifed and directed.

Extra over stone walling for hammer dressing with maximum depression on face from straight edge held against the dressed surface nexc 20mm to face stone and dressing of face beds and joints as specified of random rubble walling, uncoursed or brought upto courses complete all as specifed and directed.

Demolition of cement concrete unreinforced any description and any position complete all as specifed and directed.

M&L cement concrete 1:3:6 type C2 ( Using 40mm graded stone agg as in surface channels and drains complete all as specifed and directed.

M&L extra forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement, incl forms, moulds, mitred/stopped etc complete all as specifed and directed.

M&L PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate) as in coping including formed work complete all as specifed and directed.

M&L preparing new wall surfaces and applying 2mm thick wall care putty

M&L preparing new wall surfaces and applying two coats of distemper oil emulsion over a coat of primer

M&L preparing new wall surfaces and applying two coats of cement base paint

Dismantling plain corrugated steel sheeting any gauge, thick ness including Nainital and similar pattern complete all as specifed and directed.

S&F 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugated side lap fixed with L or J type or cranked hook bolts complete all as specifed and directed.

S&F 0.80 mm thick plain,galvanised mild steel sheeting in ridges, hips, valley gutters, drips and straight flashings with grads of zinc coating 275 complete all as specifed and directed.

S&F 0.63mm thick galvanised corrugated mild steel sheeting with grade of zinc coating with two corrugation side lap fixed with L or J type or cranked hook bolts in roof wall etc. complete all as specifed and directed.

All as per item No 40 above but except sheet complete all as specifed and directed.

M&L preparations of old decorated steel surfaces any description,over 10cm in width or girth, not otherwise describedand applying one coat of synthetic enamel paint on roof complete all as per specified and directed.

Supply and fixing Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed.

Dismantling of ceiling board any thickness including cover fillets complete all as specifed and directed.

Dismantling of frame work timber scantling 40 Sq cm and over in section in any position complete all as specifed and directed.

Dismantling of timber fillets under 40 Sq cm in section complete all as specifed and directed.

M&L 2nd class hard wood, clean sawn, in scantling timber frame and fixed with nails complete all as specifed and directed.

All as per item No 47 above but except scantling complete all as specifed and directed.

M&L second class hard wood plain fillets size square in section, clean sawn, secured with nails exc 13 but n exc 25 sqcm complete all as specifed and directed.

All as per item No 49 above but except fillets complete all as per specified and directed.

M&L second class soft wood plain fillets size square in section, clean sawn, secured with nails exc 06 but n exc 13 sqcm complete all as specifed and directed.

All as per item No 51 above but except fillets complete all as per specified and directed.

M&L preparing surfaces of wood and wood based materials new or old of any description and treated with creosote oil complete all as specifed and directed.

M&L 6mm thick plywood grade BWP type BB fixed with nail to timber frame work in wall cladding complete all as specifed and directed.

M&L 6mm thick plywood grade BWP type BB fixed with nail to timber frame work in ceiling complete all as specifed and directed.

M&L for Preparation of new wood surface of any description over 10cm width or girth applying two coat of synthetic enamel paint over a coat of pink primer complete all as specifed and directed.

M&L complete removal of existing treatment and applying two coats of synthetic enamel paint over a coat of red -oxide primer coat on roof complete all as per specified and directed.

M&L Preparation of old wood surface of any description over 10cm width or girth applying one coat of synthetic enamel paint complete all as specifed and directed.

S & F in repair for suspended GI exposed false ceiling suspension system of grid size 600mm/600mm with main runner 38mmx24mm, cross tee 29mmx24mm and wall angle 24mmx24mm. Using 4mm thick everest designer board (high pressuresteam cured), conforming to IS 14862:2000, to be placed in a grid of GI system duly suspended with 4mm dia GI/MS bar hanger fixing with steel dash fastner or iron purlins from the roof with adjustment clip providing position for light fixture etc all as specified and directed.

M&L 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC Frame as per specification and drawing

M&L for 5mm thick coloured PVC wall lining in strip & channel feathered at edge inclusive of solvent cement /screws and fixing at site complete

Taking down chowkats or frames exc 1.5 sqm but n exc 4sqm but with shutter ( with out taking of shutter from the frame) complete all as specifed and directed.

All as per item No 62 above but n.exc 1.5 Sqm each complete all as specifed and directed.

Taking down of shutter exc 1 sqm and not exc 2 sqm each complete all as specifed and directed.

All as per item No 64 above but n.exc 1 Sqm each complete all as specifed and directed.

S&F 2nd class hard wood plain ,solid ,straight chowkats and frames ,wrought framed rebated on the solided rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S&F 30mm thick flush shutter solid core construction with particle board core and plywood face panels, commercial type on both side complete all as spd and directed.

M&L 30mm thick 2nd class hard wood glazed and skeleton shutter, open rebated and prepared to receive glass gauge, etc (with sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc size of members of shutter as specified in SSR part I section 8 clause 20 (b) of windows, ventilator etc complete all as specifed and directed.

S&F 35mm thick IInd class hard wood glazed and skelton door shutter open rebated and prepared to receive glass/gauge etc (without sash barsi) edges of framing plain chamfered or rounded , fitted with cut and mitred beads for securing glass/gauge etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.20 (a) complete all as specified and directed.

S/F solid PVC door frame of size 50X47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube suupplying & fixing in opening complete all as specified and directed .

S/Ffactory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC'C' channel having a PVC sheet strip of 20mm width stuckinside solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side and as gap insert for top rail & bootom rail; paneling of plain clour PVC sheet to be fitted in the M>S frame welded/ sealed to the stieles & rails with suitable PVC sheet beading, and joining together with solvent cement, supplying & fixing in the frame at site as per specification.

S&F bands, straps, supports or stays for rain water, hooks (stay) heavy for large gates, hook and pintle hinges clamps, hold fasts, hooks for hanging james and similar small articles Fe-410-0 or Fe-310-0 complete all as specifed and directed.

S&F 100mm long butt hinges medium weight cold rolled mild steel complete all as specifed and directed.

S&F mild steel barrel tower bolts stove enamelled black with bright bolts 200mm long complete all as specifed and directed.

S&F mild steel pressed handles oval type stove enamelled black with bright bolts 150mm long complete all as specifed and directed.

S&F mild steel sliding door bolts plate type stove enamelled black with bright bolt not less than 12mm dia with end incl min 6 bolt, 4 nuts or bolt plate and two on staple plate 300mm long complete all as specifed and directed.

S&F mild steel 75mm size butt hinges complete all as specifed and directed.

All as per item No 74 above but 100mm long each complete all as specifed and directed.

S&F in repair 300mm ordinary rat tail rod pattern springs incl roller and roller plate complete mild steel all as per specified and directed.

S&F in repair 0.56mm nominal dia wire galvanised mild steel wire cloth and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staple complete all as specifed and directed.

S&F 3 mm thick sheet glass ordinary qauality and glazing with oil putty in square n.exc 0.5 sqm in each pane and including Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or driling out old glazing pins/spring clips and providing and fixing new ones complete all as specifed and directed.

Supply and fixing factory made aluminum frame for doors, windows, partition wall, shutters etc including styles & rails with standard anodized aluminum section, with one or more rebates including aluminium snap beading (wall thickness of aluminum section not less than 2mm), complete all as specified and directed (Glazing, rubber beading and aluminum hardware shall be measured and paid separately)

Material and labour for rubber beading for fixing glass panes in aluminium frame work complete all as specified and directed.

M&L 12 mm thick prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination, fixed with screws to timber/aluminium frame work.

Supply and fixing 5 mm thick sheet glass, fixed to aluminum frame work in panels n.exc 0.5 Sqm in each pane, complete all as specified & directed.

Material and labour for floor door stopper of aluminum alloy body and tongue, anodized with hard drawn steel spring, fixed in floor (140mm size), fixed as in repair complete all as specified and directed.

M&L 200 mm aluminium, anodised, barrel tower bolts of extruded section and fixed

M&L extruded aluminium ally handles, fabricated type., anodised 125 mm

Material and labour for door closer hydraulically regulated aluminum (dia cast) body, designation No 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg, fixed as in repairs, complete all as specified and directed.

Material and labour for double action floor spring of size 300mm x 200mm hydraulically regulated made up of minimum 1.25mm thick aluminium sheet foundation box, with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty, complete all as specified and directed.

M&L in repair 19mm thickness Block boards, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-work

S&F 20 mm dia chromium plated pipes for curtain rods

S&F Chromium plated brackets and knobs for curtain rods

M&L preparation of on old existing surface and apply one coat of white wash wall complete all as specifed and directed.

Taking up or down 15mm bore steel tubing and connection including cleaning for re-fixing or removal to store complete all as specifed and directed.

All as per item No 95 but 20mm bore complete all as specifed and directed.

S&F 15mm bore GI tubing medium grade with all fitting fixed to wall and ceiling or laid in floor complete all as specifed and directed.

All as per item No 97 above but 20mm bore complete all as specifed and directed.

Re-fixing 15mm bore old steel tubing and connection in view old position (wall, ceiling, floor etc) complete all as specifed and directed.

All as per item No 99 above but 20mm bore complete all as specifed and directed.

Dismantling water tank and removing to store exeeding 250 but n.exc 500 ltrs complete all as specifed and directed.

All as per item No 101 above but exeeding 500 ltrs but n. exc 1000 ltrs complete all as specifed and directed.

M&L rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in 500 ltrs capacity with HD polythene float (ball) and epoxy coated aluminium rod (fly nut) screwed for iron pipe or brass ferrule complete all as specifed and directed.

All as per item No 103 but 1000 ltrs capacity complete all as specifed and directed.

S&F in repair 110mm bore PVC (SWR) pipe single socketed any length with rubber ring joints fixed to wall including complete all as specifed and directed.

S&F PVC (SWR) bends any radius 110mm bore pipe incl taking down complete all as specifed and directed.

All as per item No 106 above but 75 mm bore pipe complete all as specifed and directed.

S&F in repair Vitreous china wash hand basin (550X400mm) white, flat back excluding taps, waste chain and plug and porcelain stopper but including brackets complete all as specifed and directed.

S&F in repair 32mm bore waste fittings brass chromium plated for glazed ware sinks basins etc with long screwed shanks and fly nuts, flange and bedded in red lead cement and othter end fixed complete all as specifed and directed.

S&F in repair pillar taps cast copper alloy with capston head chromium plated screwed down high pressure with or with out littred hot or cold with long screwed shanks and flynuts screwed for iron pipe complete all as specifed and directed.

S&F in repair 10 ltrs capacity PVC valve less syphonic action type flushing cistern low level white inlet ball valve, float , flush pipe and handle including brackets and fixed complete all as specifed and directed.

S&F in repair PVC connection 15mm dia and 450mm long complete all as specifed and directed.

S&F in repair PVC waste pipe 32mm dia complete all as specifed and directed.

S&F in repair soap dish acryrlic type 138X102X75mm complete all as specifed and directed.

S&F in repair sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs washers and waste incl bedding in cement mortar to dwarf wall or incl fixing cantilever brackets and connectings union to pipe overall size 915mmx460mmbowl size 410mmx330mmx160mm complete all as per specified and directed.

S&F in repair 15mm dia Ball brass valves high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule complete all as specifed and directed.

S&F in repair 15mm dia stop valves, cast copper alloy screwed down high pressure, with crutch or butterfly handle screwed with both ends for iron pipe or for union complete all as specifed and directed.

S&F in repair 15mm bib taps cast copper alloy with crutch or butterfly handle screwed down for iron pipe or for brass ferrules and complete all as specifed and directed.

S&Fin repair vitreous china squatting pan 'Orissa' pattern size 580x440mm with white integral footrest (excluding flushing cistern and flush pipe including making good )complete all as specifed and directed.

S&F in repair vitreous china wash down water close pan (pedestal pattern) white (excluding fixing bolt, flushing cistern and flush pipe) including making good complete all as specifed and directed.

S&F in repair plastic water closet seat, black and white closed pattern with flat bottom and cover and mild steel chromium plated plated or aluminium hinging device complete all as specifed and directed.

S&F in repairs CP grating of size 100mm dia complete all as specifed and directed.

S&F in repair brass CP mixer for mixing hot and cold water screwed down for iron pipe and fixed to wall mixture of 15mm bore complete all as specifed and directed.

All as per item No 124 above here in but WHB mixure of 15mm bore complete all as specifed and directed.

S&F in repair 15mm bore CP angle cock screwed for iron pipe or union and fixed complete all as specifed and directed.

S&F in repair CP towel rail with hook 600mm long complete all as specifed and directed.

S&F in repair CP telephonic shower rose complete all as specifed and directed.

S&F in repair aluminium door stopper with hinges etc complete all as per specified and directed.

S&F in repair 15mm dia stop valves, fancy type chromium plated screwed down high pressure, with crutch or butterfly han dle screwed with both ends for iron pipe or for union complete all as specifed and directed.

S&F in repair 15mm Bib taps standard of PTMT any colour high pressure screwed for iron pipe fixed in repair (minimum weight 90 gms) complete all as spd and directed.

S&F in repair 15 mm bib tap CP fancy type with crutch or butterfly handle screwed down for iron pipe or for brass ferrules and complete all as specifed and directed.

S/Fin repair Vitreous china bowl urinal flat back size of 465X355X265 mm white (minimum) with grating and union for discharge pipe including flush pipe and waste pipe (excluding flushing cistern) complete all as specified and directed .

S/F in repair of 15mm dia CP jet with CP flexible pipe 90cm long incl necessary fittings complete all as specified and directed .

S&F Health faucet

M/S Swarn Constructions