Selection of Agency for Development of Asarva Lake Garden/ Park along with the O & M for Three Years

BILL OF QUANTITIES (B.O.Q.)

BILL OF QUANTITIES (B.O.Q.)

Name of the work: Request for Proposal for Selection of Agency for Development of

Asarva Lake Garden/ Park along with the O & M for Three Years

Name of Contractor: _________________________.

Correspondence Address: ____________________.

Tender Amount: INR 15,57,42,711.94 /- including all cost and taxes excluding GST.

Contractor’s Quoted Rate: -

Net Tender Amount: INR ___________________/- including all cost and taxes excluding

Amount In Words: (Rupees__________________________only) including all cost and

taxes excluding GST.

<The quote to be submitted online only>

Seal and Signature of the Bidder:

DYMC (Parks & Garden), Ahmedabad Municipal Corporation

NAME OF PROJECT:- Redevelopment of Asarva Lake Garden

S.No Description of Items Estimated Value (Rs.) Total Amount In Crores.

S.No Description of Items Estimated Value (Rs.) Total Amount In Crores.

N Civil Works 45907790.02

Landscaping +Irrigation

P Electrical Works 29794564.75

Q Total Cost (N+O+P) 155742711.94

NAME OF PROJECT:- Redevelopment of Asarva Lake Garden

S.No Description of Items Estimated Value (Rs.) Total Amount In Crores.

S.No Description of Items Estimated Value (Rs.) Total Amount In Crores.

Dismantling work- Site

B Earthwork 1738211.31

C BASE COURSES 3183913.33

D RCC WORK 3068891.75

E Steel work 3330714.45

F Masonary work 4603213.94

2 Beautification Works

G Floor finish 18549381.28

H KERBS & BOLLARDS 1075701.97

I DRAINAGE WORK 2780157.10

J MISC ITEMS 2782005.56

K Sanitary and Plumbing 557398.29

L Signages 477875.99

M Painting Works 2434284.00

N Site Survey 163999.08

O O&M under DLP for 3 years 0.00

Total (Civil+Beatification

O Horticulture works 64764237.00

P Irrigation works 15276120.17

Q Electrical & Mech Works 29794564.75

R Total Cost (N+O+P+Q) 155742711.94

NAME OF PROJECT:- Redevelopment of Asarva Lake Garden

SNO DESCRIPTION QUANTITY UNITS RATE AMOUNT

A Dismantling work- Site Clearence

Clearing and grubbing road Land including uprooting rank vegetation grass bushes,

1 shrubs, sapling and trees girth upto 300mm removal of stumps of trees cut earlier and 2.2 HECTARE 28111.92

disposal of unserviceable materials (B) By mechanical means in area of thorny jungle

Demolition including stacking of serviceable materilas anddisposal of unserviceable

materials with all lead and lift. (i) R.C.C. work

Demolition of Brick work and stone masonry including stacking of serviceable materilas

and disposalofunserviceablematerialswithall leadand lift.(ii) In Cement Mortar.

Dismentaling tiledof stone floors laid inmortar including stacking of serviceable

materilas and disposalofunserviceablematerialswithall leadand lift.

Dismentlingsteelwork includingdistemperingand stacking the materials with all lead

Dismentlingdoors,windows,ventilatorsetc. (wood or steel) shutters

6 includingchowkhatsarchitraves, hold fasts and other attachment etc. complete and 26.9 each 185.85

stacking them within all leadand lift.(ii)Exceeding 3 Sq.M. in area.

Taking out existing kerb stones of all types from footpath/ central verge, including

removal of mortar etc., disposal of unserviceable material to the dumping ground, for

which payment shall be made separately and stacking of serviceable material within

metre lead as per direction of Engineer-in-Charge

Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful

materials and disposing off the excavated stuff upto 50 Meter lead.(A) Loose or soft soil

Add extra for Disposing off the excavated stuff of above items for lead of (E) 400 to

Conveyance charge of earth, lime murrum building rubbish earth manure or sludge

& execavated rock and rubbish [Lime murrum building rubbish]

b) Lead up to 1.00 Km. 29.1 CUM 256.16

c) Lead up to 1.50 Km. 29.1 CUM 268.12

d) Lead up to 2.00 Km. 29.1 CUM 278.18

e) Lead up to 2.50 Km. 29.1 CUM 287.46

NAME OF PROJECT:- Redevelopment of Asarva Lake Garden

SNO DESCRIPTION QUANTITY UNITS RATE AMOUNT

f) Lead up to 3.00 Km. 29.1 CUM 296.43

g) Lead up to 3.50 Km. 29.1 CUM 303.84

h) Lead up to 4.00 Km. 2733.4 CUM 312.45

Filling available excavated earth (excluding rock) in trenches. plinth, sides of

11 foundations etc. in layers not exceeding 20 cm. in depth consolidating each disposited 513.2 CUM 129.10

layer by ramming and watering.

Suppliying of graded stone aggregate of following sizes (for W.B.M. Road) (1 Hand

broken stone aggregate 25mm to 90mm size.

Spreading the stone aggregate for rolling and W.B.M. including filling the interstice store

13 quired camber and gradient (excluding spreading of Blindage)(iii)25mm to 50mm size 1098.9 CUM 247.28

Providing and laying cement concrete 1:3:6 (1- Cement : 3- coarse sand : 6- hand broken

14 stone aggregates 40 mmnominal size) and curing complete excluding cost of formwork 887.5 CUM 2976.00

in (A) Foundation and Plinth

Providing and laying in position Ready Mixed M-200 grade concrete for reinforced

cement conctere work , using cement content as per approved Design Mix

manufactured in fully automatic batching plant and transported to site of work in transit

mixer for a lead up to 10 kms having continuous agitated mixer, manufactured as per

mix design of specified grade for reinforced cement concrete work including pumping of

R.M.C. from transit mixer to site of laying, excluding the cost of centering shuttering

finishing and reinforcement including cost of admixtures in recommended proportions

as per IS: 9103 to accelerate/ retard setting of concrete, improve workability without

impairing strength and durability as per direction of the Engineer - in - charge. Without

Fly Ash (Min cement level as per latest IS 456 shall be maintained)

Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, binding

and placing in position complete upto floor two level

Providing formwork of ordinary timber planking so as to give a rough finish including

centering shuttering strutting and propping etc. height of propping and centering below

17 supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ 41.6 sqm 297.68

reinforced concrete and plain concrete work in. (G) Columns PillarsPosts and struts. (1)

Square Rectangular Polygonal in plan.

Providing formwork of ordinary timber planking so as to give a rough finish including

centering shuttering strutting and propping etc. height of propping and centering below

18 supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ 290.4 sqm 171.68

reinforced concrete and plain concrete work in. (A) Foundations Footings Bases of

Columns etc. and Mass concrete.

Providing formwork of ordinary timber planking so as to give a rough finish including

centering shuttering strutting and propping etc. height of propping and centering below

19 supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ 102.0 sqm 252.00

reinforced concrete and plain concrete work in. (B) Flat surfaces such as soffits of

supspened floors slabs Landings and the like. (1) Floors etc. upto 200 mm in thickness.

NAME OF PROJECT:- Redevelopment of Asarva Lake Garden

SNO DESCRIPTION QUANTITY UNITS RATE AMOUNT

Providing formwork of ordinary timber planking so as to give a rough finish including

centering shuttering strutting and propping etc. height of propping and centering below

20 supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ 301.5 sqm 192.15

reinforced concrete and plain concrete work in.(H) Sides and soffits of Beams Beam

Haunchings cantilevers Girders Bressumers and Lintels not exceeding 1 M. in Depth.

Steel work, welded in built up sections framed work including cutting, hoisting, fixing in

21 position and applying a priming coat of red lead paint. (D) In trussses and trussed 19.5 q 8386.88

purlins, upto 25 M. span and 15 M. ovarall height.

Providing valleys 900mm overall in plain 1.6mm thick G.I. sheet fixed with G.I. J or L

22 Hooks, Bolts and nuts glavanised iron J or L Hooks Bolts and nuts 8mm dia G.I. Limpet 81.6 sqm 1042.78

and bitumen washers complete.

Supply & Installation of MS CNC Laser Cut Panel of below mention thickness, Aesthetic

fixture made of MS, as per design & drawing given by architect. Item include cost of ms

sheet, cutting & installation on site. All work to be completed as per instruction of Site in

Providing & making Gabion structure with Ms or GI bars having rectangular Shaped

mesh Gabion Boxes as per IS 16014:2012,MORTH Clause 2500, of required size, Mesh

Type 10x12(D=100 mm with tolerance of ±2%), Zinic coated, with Bars of diameter

6mm, mechanically edged/ selvedged with partitions at every 1m interval and shall have

minimum 10 numbers of openings per meter of mesh perpendicular to twist, tying with

lacing wire of diameter 2.2/3.2mm(ID/OD), supplied @3% by weight of Gabion boxes,

filled with boulders with least dimension of 200 mm, as per drawing, all complete as per

directions of Engineer in-charge.

Providing and fixing post and pipe railing as per detailed drawing including 3 coats of

painting to steel works complete

Providing and fixing S.S. ERW P hollow section of various thickness and sizes in

square, rectanular and round shape from 25mm to 450mm section including frame of

grade 304 pipes with braces of S.S. grade 304 and rectangular section including cutting,

26 organ welding, grading, making circustances polishing, buffing etc. complete with 2367.0 KG 308.30

necessary holes, nuts & bolts, caps & anchor plates of S.S. grade 304 ASTM as per

drawing & instructionsof the Engineer-in-charge excluding the cost of RCC/CC and earth

Providing and supplying aluminium extruded tubular and other aluminium

sections as per the architectural drawings and approved shop drawings , the

aluminium quality as per grade 6063 T5 or T6 as per BS 1474,including super

durable powder coating of 60-80 microns conforming to AAMA 2604 of required

27 colour and shade as approved by the Engineer-in-Charge. ( The item includes cost 648.00 Kg 380.90

of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded

aluminium frame work. Nothing extra shall be paid on this account). The weight

of aluminium extruded section shall be taken for purpose

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50

mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required

complete as per the direction of Engineer-in-charge. 16.71.2 Made of G.I. wire of dia.

mm, PVC coated to achieve outer dia not less than 5 mm in required colour and shade

F Masonary work

Brick work using common burnt clay building bricks having crushing strength not less

29 than 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:5. (1- Cement : 5 -fine 490.3 cum 4345.02

sand) (A) Modular

30 Extra for brick work in superstructure above plinth level upto floor two level (A) Modular 167.4 CUM 262.35

Providing 10mm thick cement plaster in single coat on brick/concrete walls for interior

31 plastering upto floor two level and finished even and smooth in (i)Cement mortar 1:3 (1- 1995.0 sqm 127.58

White Stone Bela mesonry block in course in superstructure with stone of approved

32 quality in Lime Mortar 1:1.5 (1-Lime putty : 1.5- finesand) including packing the joints 16.8 CUM 4303.47

NAME OF PROJECT:- Redevelopment of Asarva Lake Garden

SNO DESCRIPTION QUANTITY UNITS RATE AMOUNT

Providing panel wall for dry stone pitching inuncourased rubblemasonary with had stone

of approved quality in cement. mortar 1.5 including curing etc, complete.

Providing and laying Vitrified tiles 8 to 10 mm thick , 36'' x 36'' in flooring treads of steps

34 and landing laid on a bed of 12mm thick cement mortar 1:3 (1- cement : 3-coarse sand ) 210.0 SQM 1469.91

finishing with flush pointing in white cement.

Providing and laying Ceramic tiles 6mmthick in flooring treads of steps and landing laid

35 on a bed of 12mm thick cement mortar 1:3 (1-cement : 3 coarse sand)finishing with 475.0 SQM 960.47

flush pointing in white cement.

Providing and laying polished Kota stone slab flooring over 20mm (Average) thick base of

36 cement mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 laid over and jointed with 1841.3 sqm 1085.48

grey cement slurry including rubbing and polishing etc. complete. (B) 30 mm thick

37 Extra labour for Chiselling in approved patterns and texts 3.0 Day 970.00

Providing and laying gang saw cut 30 mm thick, mirror polished / shot blasted pre

moulded and pre polished machine cut granite stone of required size and shape of

approved shade, colour and texture in footpath, flooring in road side plazas and similar

38 locations, laid over 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) 52.5 Sqmt 5089.82

including grouting the joints with white cement mixed with matching pigment, epoxy

touch ups etc. complete as per direction of Engineer-in-Charge. 16.87.1 With granite

stone of colour black, cherry/ruby red of area less than 0.50 sqm.

Providing and fixing 10x10x7.50 cm Granite stone block hand cut and chisel dressed on

top, for paving in floors, drains etc. laid over 20mm thick base mortar 1:4 (1 cement :

coarse sand) with joints 10mm wide filled with same mortar including ruled pointing etc.

complete as per direction of engineer-in-charge.

Providing and laying flamed/ lapato finish Granite stone flooring in required design and

patterns, in linear as well as curvilinear portions of the building all complete as per the

architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of

cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and

pointing with white cement slurry admixed with pigment of matching shade including

rubbing, curing and polishing etc. all complete as specified and as directed by the

Engineer-in-Charge : Flamed / lapoto/shot blasted finish granite stone slab Jet Black,

Cherry Red, Elite Brown, Cat Eye or equivalent.

Providing and laying factory made chamfered edge Cement Concrete paver blocks in

footpath, parks, lawns, drive ways or light traffic parking etc, of required strength,

thickness & size/ shape, made table vibratory method using PU mould, laid in required

colour & pattern over 20mm thick mortar, compacting and proper embedding/laying of

inter locking paver blocks into the sand bedding layer through vibratory compaction by

using plate vibrator, filling the joints with sand and cutting of paver blocks as per

required size and pattern, finishing and sweeping extra sand. complete all as per

direction of Engineer-in-Charge

80mm thick cement concrete paver block of M-35 grade with approved colour, design &

41.2 60MM THICK PAVER 3095.0 sqms 841.57

41.3 500X500X80MM TURF PAVER 575.0 sqms 1348.87

Providing and fixing acrylic plastic sheet panels of approved quality in required

thickness plain clear or any colour or obscured linings in lieu of glass pans to

doors/windows including providing and fixing clips, putty etc. complete. (b) 3.00 mm

Providing, laying, spreading fine sand of zone IV, complete as per specifications and

directions of Engineer-in-Charge.

Supplying, filling, spreading & leveling gravels/round pigmented pebbles of size range

44 mm to 50 mm, in the recharge pit, over the existing layer of boulders, in required 116.0 Cums 546.33

thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.

Supplying, filling, spreading & leveling stone boulders of size range 20 cm to 500cm, in

45 recharge pit, in the required thickness, for all leads & lifts, all complete as per direction 240.0 Cums 1336.90

of Engineer-in-charge.

Providing and laying rough chiseled dressed stone flooring over 20mm thick base of

46 cement mortar 1:5 (1-Cement : 5-coarse sand) or L.M. 1:1.5 including pointing with 100.0 Sqms 610.15

cement mortar 1:2 (1- cement : 2-stone dust) etc. complete. (B) 40mm thick

Supplying, filling, spreading & leveling crushed stone aggregate (bajri) hard quality of

47 size range 10 mm to 20 mm, in place, for all leads & lifts, all complete as per direction of 18.0 CUMS 784.63

Engineer-in-charge.

Supply providing and fixing of 50mm thick EPDM flooring of approved colour and pattern

complete as per the drwaings and the directions of engineer in charge

NAME OF PROJECT:- Redevelopment of Asarva Lake Garden

SNO DESCRIPTION QUANTITY UNITS RATE AMOUNT

Supplying & laying of bi-axial extruded high modulus polypropylene geogrid coforming to

MORTH SPECIFICATION for base/sub-base reinforcement having minimum tensile

49 strength 15kN/m in the longitudinal and transverse direction, with 5kN/m and 7kN/m 3470.0 sqm 249.90

tensile strength at 2% and 5% strain respectively in the longitudinal and transverse

direction, junction efficiency not less than 95% and with 38mm X 38mm mesh opening.

Supplying, filling, spreading & leveling murrum, in required thickness, for all leads &

lifts, all complete as per direction of Engineer-in-charge.

Providing and fixing Rajula stone 75mm thick 60mm x45mm size including fixing in

cement mortar as directed

H KERBS & BOLLARDS

Providing and fixing pre-cast concrete kerb stone of gray cement based concrete block

30cm length,30cm height and 15cm thick of M250 grade concret as per approved design

and including excavation for fixing in proper line and level,filling the joint with C:M 1:3

(1cement:3fine sand) etc complete.

Precasting and placing in position Bollards of required shape and size including

providing M.S. Pipe Sleeve 50 mm dia 300 mm long in the Bollard and M.S. Pipes 40 mm

dia and 450mm long with 150x150x6mm M.S. plate welded at bottom and embedded

53 150mm in cement concrete 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from 20.0 Each 2398.50

natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural

sources), including necessary excavation of size 250x250x450mm deep for the same in

bitumen/concrete pavement at specified spacing.

Supply providing and fixing in place wheel stoppers made of rubber having load

54 carrying capacity of 1Ton minimum with reflective strips Complete as per drawings 80.0 Each 3000

and the directions of Engineer in charge

I DRAINAGE WORK

Supply and laying of drainage composite for use in swales, plantation and slope works

etc. comprising on two layers of nonweeven geotextile having mass per unit area

150gsm with all leads and lifts , manpower, machinery labour etc complete and as

directed by engineer incharge

Providing laying (to level or slopes) and jointing reinforced concrete Light duty non-

pressure pipes I.S. class NP2 of the following internal diameter with collars and butt

ends prepared for collar joints

including testing of joints complete.(B) 150mm

Providing laying (to level or slopes) and jointing reinforced concrete Light duty non-

pressure pipes I.S. class NP2 of the following internal diameter with collars and butt

ends prepared for collar joints

including testing of joints complete.(B) 300mm

Providing laying (to level or slopes) and jointing reinforced concrete Light duty non-

pressure pipes I.S. class NP2 of the following internal diameter with collars and butt

ends prepared for collar joints

including testing of joints complete.(B) 450mm

Providing laying (to level or slopes) and jointing reinforcedconcreteLightdutynon-

pressurepipes I.S. classNP2of the following internal diameter

withcollarsandbuttendspreparedforcollarjoints including testing of joints complete.(K)

Providing laying (to level or slopes) and jointing reinforcedconcreteLightdutynon-

pressurepipes I.S. classNP2of the following internal diameter

withcollarsandbuttendspreparedforcollarjoints including testing of joints complete.(K)

Constructing Brick masonry road gully chamber 500mm x 450mm x 600mm including

500mm x 450mm C.I. horizontal grating wih frame complete.

NAME OF PROJECT:- Redevelopment of Asarva Lake Garden

SNO DESCRIPTION QUANTITY UNITS RATE AMOUNT

Constructing brick masonry chamber for underground C.I. Inspection chamber and

bends with bricks having crushing strength not less than 35Kg/ Cm2 in C.M. 1:5 C.I.

cover with frame (Light duty) 455mm x 610mm intenal dimensions total weight of cover

with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. )

62 (R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate 20.0 EACH 7109.35

20mm size) foundation concrete 1:5:10 inside plaster 15mm thick with cement mortar

1:3 finished smooth with a floating coat of neat cement on walls and bed concrete etc.

complete.(iii) Inside dimensions

600mm x 850 mm and 450mm deep for pipe lines with three or more inlets.

Supply Providing and fixing corten steel sheets in place complete as per the drawings

and the directions of engineer in charge

Providing erecting and fixing double coated ISI-FRP water tank of required capacity each

with all necessary fittings and connection etc. complete on terrace

Providing and fixing 30mm thick FACTORY MADE SOLID PANEL PVC DOOR SHUTTER

consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x

19mm for stiles and 15mm x 15 mm for top and bottom rails. M.S. frame shall have a

coat of steel primers of approved make and manufacture, M.S. frame shall be covered

with 5 mm thick heat moulded PVC ‘C’ channel of size 30 x 50 mm forming stiles, and

5mm thick 75mm wide PVC sheets for top rail, lock rail and bottom rail on either side,

and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail and

bottom rail, Panelling of 5 stiles and rails with 30mm wide x 5mm thick PVC sheet

beading on eighter side, and joined together with solvent cement adhesive,. An

additional 5mm thick PVC strip of 20mm width is to be stculk on the interior side of the

‘c’ channel using PVC solvent cement adhesive etc. complete as per direction of

Engineer in charge, manufacture’s specification and drawing.

Providing and fixing window having extruded aluminum Colour anodized section frame

main outer size 127mm x 38.10mm x 1.35mm @wt. 1.384kg/m, horizontal Four track

member size 122.20mm x 31.75mm x 1.10mm@ wt 1.205 kg/m, vertical member of size

122.20mm x 31.75mm x 1.50mm @1.398 kg/mt with sliding shutters of horizontal

member size 40mm x 18mm x 1.29mm@ 0.456kg/mt ,vertical member of size 40mm x

18mm x 1.29mm @ 0.456 kg/mt with 5 mm thick transparent bronze colour tinted float

glass with powder coated aluminum fittings and fixtures and transparent silicon sealant

glass fixing to frame as per details etc complete for window.

Providing wood work in Trusses, Purling, Rafter, Post,Post Plates, wall plates and the

like wrought framed, hoisted and fixed in position

Providing and fixing SS DOUBLE POLE 14X24 INCH GRADE 202, WEIGHT 13.000 KG

APPROX. CAPACITY 40+40 LTR OPEN TYPE SHEET THICKNESS 0.5 mm APPROX.

Supply & Installation of 5 mm clear toughend glass + 1.52 clear PVB layer + 5 mm clear

toughend glass s per design & drawing given by architect.

Road marking with hot applied thermoplastic paints with reflectorising glass beads

on bitumin surface providing and laying a hot applied thermoplastic compound

mm thick including reflectorising glass beads @ 250gms per sqm area, thickness of

2.5mm is excluding of surface applied glass beds as per IRC:35- 2015. The finished

surface to be level, uniform and free from streaks and holes. zebra patta /bump patta

lane/center line/ edge line/cut patta. The white color marking should provide

liminance coefficinet on cemend road shalll be min 130 mcd/m2/lux and Asphalt

road shall be min 100 mcd/m2/lux during the service life during the day time. The

marking should meet the performance criteria for night time reflectivity, wet

reflectivity and skid resistance as mentioned in the section-15 of IRC 35-2015.

Warranty for the Retro reflectivity should be two years.

Providing fixing in place WPC flooring made up of teak wood, complete work in

71 cluding T&P and materials complete work as per the drawings and the directions of 49.50 Sqms 2925.50

engineer in charge.

Supply and fixing of 10mm multiwall clear Polycarbonate sheet, aluminium profile,

aluminium L Angle, Screws, Sealants and fixing accessories

Supply Providing & Installation of Frp Sheets of required texture and shape as per the

73 drawings including all the necessary tools, clamps, accessiories etc complete work per 125.0 sqm 923.48

design & drawing given by architect & directtions of engineer in charge

NAME OF PROJECT:- Redevelopment of Asarva Lake Garden

SNO DESCRIPTION QUANTITY UNITS RATE AMOUNT

Supply Providing and erecting of standard quality GFRC (Glass Fiber Reinforced

Concrete) pannels in walls, in all floors using suitable crane as per instructions of

Engineer in charge, as per cutting drawings and structural drawings in perfect line and

plumb above RCC Plinth beam / GFRC pannel below and provide necessary lateral /

74 slanting support to keep wall panner in safe position and tieng reinforcement as per 262.5 Sqm 1813.75

structural drawings and applying a coat of water reppelent coating Zycosil / equivalent

product (1 part compound and 1 parts water). Rate include provision of linters, beams,

sunshades, starircase beams lofts, plumbing work, electrical conduits and any other

structural insertion etc. as per the drawings and direction of engineer in charge.

K Sanitary and Plumbing

Providing and fixing wsh down water closet (European type, W.C. Pan) with integral P or

S trap including jointing the trap with soil pipe in Cement Mortar 1:1 (1-Cement : 1-fine

sand) (Seal and cover to be measured and paid for separately)(A) vitreous China Pattern

:(i) in white colour

Providing and fixing water closet squatting Pan (Indian type W.C. Pan) size 580mm

76 (Earthwork, bed concrete, foot reste and trap to be measured and 9.0 EACH 926.10

paid for separately) (A) Vitreous China.(I) Long pattern = White colour

Providing and fixing 12.5 Litres low level flushing cistern with a pair, of C.I. or Mild

brackets, complete with fittings such as lead valve less syphon, 15mm nom.nal size

brass ball valve with polythene float, C.P brass handle unions and couplings for

77 connections, with inlet, outlet and overflow pipes, 40mm dia. porcelain enamelled flush 18.0 each 2321.21

bend including cutting holes in walls and making good the same connecting the flush

bend with cistern and closet (overflow pipe to be measured and paid for separately)(A)

Vitreous China (I) In white colour

Providing and fixing washbasin with single hole for pillar tap with C.I. or M.S. brackets

painted white including sutting holes and making good the same but excluding

fittings.(A) Vitreous China:(ii) Flat Back washbasin 550 mm x v 400mm size. (i) In white

79 Providing and fixing C.P. brass waste for washbasin or sink. (A) 32mmdia. 12.0 each 67.24

Providing and fixing 600mm x 450mm bevelled edge mirrror of superior glass mounted

80 on 6mm thick A.C. sheet or plywood sheet and fixing to wooden pluge with C.P. brass 12.0 each 825.48

screws and washers.

Providing and fixing C.P. brass towel rail comlete with C.P. brass brackets fixed to

wooden plugs with C.P. brass scews.(B) 600mm x 20mm size.

82 Providing and fixing toilet paper holder.(A) C.P. Brass 18.0 each 414.53

Providing and fixing screw down bib taps of following size.(A) Brass screw down bib tap

polished bright. (i) 15mm dia.

Providing and fixing Urinal of approved quality including connection with trap and with

84 integral longitudinal flush pipe.(A) Squating plate pattern white earthenware 550mm x 18.0 each 1535.63

Providing laying and jointing in true line and level 32mm dia. U.P.V.C. Pipe ( SCH- 40) for

cold water including fittings as approved by Engineer In Charge. Pipe shall be fixed on

the wall with the help of clamp at every two metre C/C or shall be concealed as directed

including necessary fittings etc. including testing of pipe and joints and fixing the same

with adhesive solvent, including cost of all

Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm diameter with jali

86 of the following nominal diameter of self cleansing design with C.I scread down or 12.0 each 565.43

hinged grating including the cost of cutting and making good the walls.

Providing, laying and jointing in true line and level 110 diametre U.P.V.C (Type B)

conforming to IS 13592-1992 with one end plain and other end socketed with rubber

ring, & fittings conforming to ISI 14735-1999 of approved make for drainage system pipe

line, pipe shall be jointed with each other with rubber lubricant, pipe shall be fixed on

87 wall using of PVC clamp of the size 110 mm 150.0 rmt 826.88

diametre x 149 mm length x 145 mm heigh at every 2000 mm center to center or shall be

concealed in walls as directed including necessary fittings such as

bends, shoes etc. including testing of pipes and joints and jointed with adhesive solvent

cement including cost of all materials.

Providing layingand jointing intrue lineandlevel 15mmdia.U.P.V.C.Pipe(SCH-40)

forcoldwater including fittings as approved by Engineer In Charge. Pipe shall be fixed on

88 the wall with the help of clamp at every two metre C/C or shall be concealedas directed 180.0 rmt 71.93

including necessary fittings etc. including testing of pipe and joints and fixing the same

with adhesive solvent, including cost of all materials.

NAME OF PROJECT:- Redevelopment of Asarva Lake Garden

SNO DESCRIPTION QUANTITY UNITS RATE AMOUNT

Providing layingand jointing intrue lineandlevel 25mmdia.U.P.V.C.Pipe(SCH-40)

forcoldwater including fittings as approved by Engineer In Charge. Pipe shall be fixed on

89 the wall with the help of clamp at every two metre C/C or shall be concealedas directed 120.0 rmt 90.93

including necessary fittings etc. including testing of pipe and joints and fixing the same

with adhesive solvent, including cost of all materials.

Providing layingand jointing intrue lineandlevel 40mmdia.U.P.V.C.Pipe(SCH-40)

forcoldwater including fittings as approved by Engineer In Charge. Pipe shall be fixed on

90 the wall with the help of clamp at every two metre C/C or shall be concealedas directed 120.0 rmt 146.65

including necessary fittings etc. including testing of pipe and joints and fixing the same

with adhesive solvent, including cost of all materials.

Providing layingand jointing intrue lineandlevel 50mmdia.U.P.V.C.Pipe(SCH-40)

forcoldwater including fittings as approved by Engineer In Charge. Pipe shall be fixed on

91 the wall with the help of clamp at every two metre C/C or shall be concealedas directed 135.0 rmt 193.73

including necessary fittings etc. including testing of pipe and joints and fixing the same

with adhesive solvent, including cost of all materials.

Providing, laying and jointing in true line and level 160diametreU.P.V.C (Type B)

conforming to IS 13592-1992with one end plain and other end socketed with rubberring,

& fittings conforming to ISI 14735-1999 of approvedmake for drainage systempipe line,

pipe shall be jointed with each other with rubber lubricant ,pipe shall be fixed on wall

using of PVC clamp of the size 160mm diametre x 210mm length x 196mm heigh at

every 2000mm center to center or shall be concealed in walls as directed including

necessary fittings such as bends, shoes etc. including testing of pipes and joints and

jointedwith adhesive solvent cement including cost of all materials

Providing and fixing S.S. Plates for signages of various thickness and sizes in square,

rectanular and round shape, section including frame of grade 304 with braces of S.S.

grade 304 and rectangular section including cutting, organ welding, grading, making

circustances polishing, etching letters buffing etc. complete with necessary holes, nuts

& bolts, caps & anchor plates of S.S. grade 304 ASTM as per drawing & instructions of

the Engineer-in-charge excluding the cost of RCC/CC and earth work.

Supply , Providing, Fixing of signages made of wodden planks with etching of words as

94 per drwaings and complete fixings usings nails, adhesive etc as per the directions of 252 Sqms 1530.00

engineer in charge

M Painting works

Painting two coats (excluding priming coat) on new steel and other metal surface

with enamel paint, brushing, interior to give an even shade including cleaning

the surface an even shade including cleanicn the surface of all dirt, dust and

other foreign matter.

White washing with lime on wall surface (two coats) to give an even shade

96 including thoroughly booming the surface to remove all dirt, dust; 2320.0 sqm 12.29

mortar drops and other foreign matter.

Wall painting (two coats) with plastic emulsion paint of approved brand and

manufacture on undecoratedwall surface to give aneven shade including

throughly brushing the surface free from mortar droppings and other

foreignmatter and sand papered smooth.

Paintingtwocoats(excludingprimingcoat)onnew wood andwoodbased surfacewith

readymixed paint, brushing, oil, gloss, semi gloss togiveand evenshade

includingcleaning ofalldust,dirtand other foreign matter sand papering and stopping.

Contour surveywork for prepaing contourmaps by taking cross-section at every

30M. intervals including all, labour materials and instruments.

Surveying for site works including ranging, chaining, pegging leveling and

compass surveying including all labour materials and instruments etc,complete

O Maintencence Work

Carrying operation and maintanence work including necesaary repairs, cleaning and

100 and replacement of dameged items / materials for 3 years under DLP as per the 36.0 Months 0.00

directions of engineer in charge (for garden and commercial area).

Project Name : ASARWA LAKE GARDEN

ESTIMATION FOR LANDSCAPE AUTOMATIC IRRIGATION SYSTEM

I Manual Irrigation Works

S.No Description Units Qty Amount

Installation Rates

Pipes Work: Supply, laying & commissioning in position PVC pipe conforming to IS:4985:2000 and suitable for

the respective working pressures without all fittings and accessories e.g. couplings, tees, bends, reducers,

screwed adapters, flanged tail pieces etc., complete, as per the instructions of Architect/Landscape

Architect/Engineer In Charge.

1.01 PVC pipe 110mm-10 kg/cm²- Mainline Rm 972.00 706.00

1.02 PVC pipe 90mm-10 kg/cm²- Mainline Rm 342.00 474.00

1.03 PVC pipe 75mm-10 kg/cm²- Mainline Rm 690.00 332.00

1.04 PVC pipe 63mm-6 kg/cm² Rm 462.00 167.57

1.05 PVC pipe 50mm-6 kg/cm² Rm 1,458.00 104.50

1.06 PVC pipe 40mm-6 kg/cm² Rm 2,910.00 92.50

1.07 PVC pipe 25mm-10 kg/cm² Rm 30.00 61.25

1.08 PVC pipe 20mm-10 kg/cm² Rm 30.00 39.50

1.09 PVC fittings LS -

1.10 Earth work excavation and refilling 300x450mm Rm 6,834.00 90.00

1.11 Hume Pipe for road crossing 6" Dia Rm RO

1.12 MS Pipe - B class for road crossing 4" Dia - B Class Rm RO

1.13 Core cutting in concrete slab/brick wall for pipe routing Up 63 to 110 mm dia Nos RO

1.14 Chipping in Brick or Concrete for Main and Lateral lines Rm RO

Supply,Fixing & commissioning of 8mm Anchor fasteners, 8mm Threaded Rod, Universal Clamp, Channel,

Threaded U Clamp, for below podium work Nos RO

Supply,Fixing & commissioning of MS Bracket fabricated from L-Angle with Anchor Bolts as wall/floor

2.00 DRIP & ACCESSORIES

Supply, Fixing & Commissioning of flexible,kink resistant 16mm subsurface inline tubing and copper shield

technology or Equivalent Technology protects the root intrusion with pressure compensating, self

flushing emitter, brown in colour, UV damage and algae growth with flow rate of 2.3/3.5 lph pressure rating

2.01 0.58 to 4.14 bar, Dripper Spacing at 30 cm / 45 cm Spacing with 100mm-150mm depth of earthwork etc.,

complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge. WITH ALL FITTINGS

Supply,Fixing & commissioning of 2" Large Capacity Y Type Disc / Screen Filters for submain filteration Have

High Flow & Low Maintenance With a Solid Build,Maximum Flow Up to 110 gpm (25m³/hr), Maximum Pressure

116 psi (8 bar),Maximum Temperature Up to 140ºF (60ºC) etc., complete, as per the instructions of

2.02 Architect/Landscape Architect/Engineer In Charge.

Supply,Fixing & commissioning of 1.5" Large Capacity Y Type Disc / Screen Filters for submain filteration

Have High Flow & Low Maintenance With a Solid Build,Maximum Flow Up to 88 gpm (15m³/hr), Maximum

Pressure 116 psi (8 bar),Maximum Temperature Up to 140ºF (60ºC) etc., complete, as per the instructions of

2.03 Architect/Landscape Architect/Engineer In Charge.

Supply,Fixing & commissioning of 1" Large Capacity Y Type Disc / Screen Filters for submain filteration Have

High Flow & Low Maintenance With a Solid Build,Maximum Flow Up to 26 gpm (6m³/hr), Maximum Pressure

psi (8 bar),Maximum Temperature Up to 140ºF (60ºC) etc., complete, as per the instructions of

2.04 Architect/Landscape Architect/Engineer In Charge.

Supply,Fixing & commissioning of 40mm/50mm/63mm dia self-closing flushing valves that are installed at

the end of the irrigation line for effecting flushing of the line at the beginning of every irrigation cycle, thus

avoiding the clogging of the emitters /sprinklers through removal of particles, sediments and other impurities

2.05 from the water. etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge.

Supply,Fixing & commissioning of 9 - Gauge Galvanized Steel Rod Comes Sharp tips provide easy insertion

into all soil types, Staple Distribution Tubing , XF Drip Line or XBS Tubing to Finished Grade. Notched Sides.

Corrosion -Resistant of TIE DOWN STAKE etc., complete, as per the instructions of Architect/Landscape

2.06 Architect/Engineer In Charge.

3.00 SPRINKLERS & ACCESSORIES

Supply,Fixing & commissioning of Pop up spray head1804 SAM PRS Series Spray bodies, with Rotary

nozzle having mutilple stream MPR sprayhaving Co-moulded wiper seal is molded into the cap and features an

encased plastic 'cage' to provide unmatched resitence to grit, nozzle having capable of covering 2.4m -7.3m

at 1.4 - 3.8 Bars pressure, True flushing mechanism,Thick streams and large water droplet & Low

precipitation rate and the enviroment. Additionally, the pressure-activated, multi-function seal design assures a

positive seal without excess'flow-by'which enables more heads to be installed on the same valve, Two-piece

3.01 ratchet mechanism, Features is Precision controlled flush at pop-down clears debris from unit, Construction of

time-proven UV_resitant plastic. Pop spray body shall with stand upto 4.8 bar. Built-in Seal-A-Matic™ (SAM)

check valve. Traps water in lateral pipes in elevation changes of up to 14 feet (4.2 m). PRS Maintains

constant outlet pressure at 30 psi or 45 psi at varying inlet pressures.etc., complete, as per the instructions

of Architect/Landscape Architect/Engineer In Charge. 1804 SAM PRS R1724

Supply,Fixing & commissioning of 5004 PLUS SAM PRS Series Rotor pop up sprinkler full/part circle having

radius of 6.7m - 12m @ 2.5 - 4.5 bar with discharge of 0.09 - 0.61 ltr./sec. the sprinklers having Arc Adjust

thru Top Cover w/ Std. Screwdriver The sprinkler is gear driven rotary type with having 3/4" bottom inlet.

Oversized wiper seal, Rain Curtain technology, gentle close-in watering and Self-flushing arc adjustment port

and also having tapered riser stem with Wiper Seal The sprinkler shall have Plus (PL) Flow shut off, 45 psi

3.02 pressure regulator with flow optimizer technology, internal Seal - A - Matic device which prevents low

head drainage (upto 3.1m) & hence puddling & erosion. The body of sprinkler is of non - corrodible, heavy

duty, ABS plastic.O-ring Slip Clutch,Racheting Slip Clutch,Side Inlet Available 6" and 12",Turret-mounted ID

Plugs,Flow Stop Available,Non-potable water indication available etc., complete, as per the instructions of

Architect/Landscape Architect/Engineer In Charge.

Supply,Fixing & commissioning of 1/2" Pop up Connecting Swing joint Assembly , 12" Length . The tubing

shall be made of polyetylene having wall thickness of 2.3mm ,a working pressure of 5.5 kg/cm2 at 43oC and a

surge pressure of 16.6 kg/cm2. Flex pipe textured for wet conditions.The fittings shall be made of UV resistant

3.03 thermo plastic etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge..SA

Supply,Fixing & commissioning of 3/4" Pop up Connecting Swing joint Assembly. The tubing shall be made

of polyetylene having wall thickness of 2.3mm ,a working pressure of 5.5 kg/cm2 at 43oC and a surge pressure

3.04 of 16.6 kg/cm2. Flex pipe textured for wet conditions.The fittings shall be made of UV resistant thermo plastic

etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge..SA Series.

Supply,Fixing & commissioning of Imported HDPE service saddle of varying size (32mm,40mm,50mm &

3.05 63mm dia) with pressure rating of PN 10 etc., complete, as per the instructions of Architect/Landscape

Architect/Engineer In Charge. Nos 305.00 200.00

4.00 VALVES & ACCESSORIES

Supply,Fixing & commissioning of PVC Single Union Ball Valve,security pivot to maintain lever in space,double

water tight joint,direct injection stem,Stem O-Ring, non mechanical ,ball Seals with backing seals and with a

4.01 base which permits maximum penetration into the valve of size 63mm with pressure rating PN 10 etc.,

complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge.

Supply,Fixing & commissioning of PVC Single Union Ball Valve,security pivot to maintain lever in space,double

water tight joint,direct injection stem, Stem O-Ring, non mechanical ,ball Seals with backing seals and a base

which permits maximum penetration into the valve of size 50mm. with pressure rating PN 10 etc., complete,

4.02 as per the instructions of Architect/Landscape Architect/Engineer In Charge.

Supply,Fixing & commissioning of PVC Single Union Ball Valve,security pivot to maintain lever in space,double

water tight joint,direct injection stem,Stem O-Ring, non mechanical ,ball Seals with backing seals and with a base

which permits maximum penetration into the valve of size 40mm. with pressure rating PN 10 etc., complete,

4.03 as per the instructions of Architect/Landscape Architect/Engineer In Charge.

Supply,Fixing & commissioning of a double acting air and vaccum release 1/2 " Air release valve . The Air

release valve shall be capable of both releasing and admitting air from and into the line. The working pressure

shall be 5 bar. Only for Drip Irrigation etc., complete, as per the instructions of Architect/Landscape

Architect/Engineer In Charge.

Supply,Fixing & commissioning of a double acting air and vaccum release 2 " Air release valve . The Air

release valve shall be capable of both releasing and admitting air from and into the line. The working pressure

4.05 shall be 10 KSC etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In

Supply,Fixing & commissioning of 6"Round box with greenlid with features Snap-in overlapping lid, Skid-

resistant lid texture,, Body built with three ridges for additional support to sidewallst & Having Dimensions @

Top Opening :6 1/8" Dia & Bottom Opening 8 5/8" Dia etc., complete, as per the instructions of

Architect/Landscape Architect/Engineer In Charge.

Supply,Fixing & commissioning of 10" Round Valve Box with greenlid with features of Overlapping lid with

bolt hole and twist lock, Skid-resistant lid texture, Body built with double ridges for additional sidewall support

& Having Dimensions @ Top Opening 10" Dia & Bottom Opening 12 13/16" Dia etc., complete, as per the

instructions of Architect/Landscape Architect/Engineer In Charge.

Supply,Fixing & commissioning of 12" Rectangular Standard Valve Box features, Drop-in lockable lid, Skid-

resistant lid texture, Double ledge lid support, Ridge adds additional support to sidewalls & having Dimensions

@ TTop Opening: 15" L x 9 ½" W Bottom Opening: 18" L x 12 ½" W x 10" H etc., complete, as per the

4.08 instructions of Architect/Landscape Architect/Engineer In Charge.

Supply,Fixing & commissioning of 18'' Jumbo Rectangular Standard Valve Box with greenlid and corrugated

structure with unique shovel access slot and bolt hole knockout & having Dimensions @ Top Opening:18 1/4" L

X 13" W & bottom opening :21 1/4" L X 15 15/16"W X 12" H etc., complete, as per the instructions of

4.09 Architect/Landscape Architect/Engineer In Charge.

Supply,Fixing & commissioning of 3/4th inch Quick coupling valve made up of solid brass with locking cover

corrosion resistant and stainless steel spring etc., complete, as per the instructions of Architect/Landscape

4.1 Architect/Engineer In Charge.

Supply,Fixing & commissioning of 3/4th inch Key threads into top of QCV to provide water access etc.,

complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge.

Supply,Fixing & commissioning of 3/4th inch Hose Swivel Made up of Solid Brass Swivels up to 360 degrees

to allows hose to be pulled in any direction & Also to prevent Hose Damage etc., complete, as per the

4.12 instructions of Architect/Landscape Architect/Engineer In Charge.

Supply,Fixing & commissioning of Imported HDPE service saddle of varying size (75mm to 110mm dia) with

pressure rating of PN 10 etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In

5.00 FILTRATION UNIT

Supply,Fixing & commissioning of 4'' Fully Automatic Self Cleaing Filter, Pressure Differential Based,

Micron, Filter housing and lids made with S-235-JR carbon steel. Finish treatment. Kiln Polymerized epoxy-

polyester powder coating & Filtration screen-AISI-316L., Flanged End & all required Accesories Capacity of 4" -

5.01 70m3 \Hr & Min./Max. working pressure - 2.5 / 10 bar as per the instructions of Architect/Landscape

Architect/Engineer In Charge.

Supply,Fixing & commissioning of Pressure Gauge 2" dial With glycerine filled complete, as per the

instructions of Architect/Landscape Architect/Engineer In Charge.

6.00 PUMPING UNIT

Supply,Fixing & commissioning of Hydro-Pneumatic Pumping System with Variable Frequency Drive

Mechanism of suitable capacity with Suction & Delivery Manifold, Wafer Seal Butterfly Valve as Isolation Valves,

Non Return Valves, Pump Control Panel, Pressure Vessel, mounted on a Baseframe with proper supports etc.,

complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge.

Duty of Pump : 6.00 LPS

Pressure Head Range = 65 - 70 Mtr

No. of Pumps : 2 Working + 1 Standby

Supply ,Fixing & Commissioning of Control Cable for Pump Set - 3 core X 4 / 6 Sq.mm Copper cable based on

6.02 the pump capacity

Supply,Fixing & commissioning of 4'' control Valve, Butterfly Valve VAN Stone flange & Tail Piece in

mainline for bypass and flow diversion of approved quality with pressure rating of PN 10 etc., complete, as per

6.04 the instructions of Architect/Landscape Architect/Engineer In Charge.

Supply,Fixing & commissioning of 4'' Non Return Valve to prevent back flow have flap type or spring type

with pressure rating of PN 10 etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In

Supply,Fixing & commissioning of Imported Pressure Release valve 4" Metal body with pressure setting

PN16 BAR etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge.

Supply,Fixing & commissioning of Pressure Sustaining valve 4" Metal Body with pressure setting from 0 to

16 Bar etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge.

7.00 Automation Equipments

Supply,Fixing & Commissioning of 12 Awg x 2 Maxi Jackated Direct Burrial Irrigation Automation Cable.

Tin coated copper conductors, insulated with PVC and having a high density polyethylene direct burial jacket.

Conductor - Soft annealed tin coated solid copper conforming to ASTM B-33. Insulation: Polyvinyl Chloride

7.01 conforming to UL Standard 493 for TYPE UF/TWU rated 75°C. Outer Jacket: Pressure Extruded High Density PE

conforming to ICEA S-61-402, and NEMA WC5 Jacket Thickness 3/64" minimum jacket material to completely fill

interstices between the two insulated conductors for two way communication between decoder controller and

decoders complete , RAINBIRD PAIGE OR XERITECH

Supply,Fixing & Commissioning of 25mm PVC Conduit pipe (3/4'') including fittings and accessories

Supply,Fixing & commissioning Of Two wire control system without Decoder

ESP-LX IVM PRO 230V Input, DC output Irrigation Controller having Two way Communication between

controller and Smart valve supports up to 240 stations standard Up to four 2-Wire paths , plus flow sensing

and advanced flow management tools. support upto 5 flow sensor inputs and removable front panel is

programmable under battery power. Learn Flow utility and fl ow usage totalizer help optimize water usage, •

FloWatch™ protection for high and low flow conditions set by the user, FloManager™ manages hydraulic

demand, make full use of available water to turn on as many stations as possible without exceeding water supply

and reducing the total time to complete irrigation cycles.• SimulStations™ allows stations to operate at the

same time; up to 16 with LXIVM Pro, • Cycle+Soak™ by station, • Rain Delay up to 30 days, • 365-Day Calendar

Day Off (up to 5 days), • Station Delay by program, • Normally Open or Normally Closed Master, Valves

programmable by station; up to 10 with LX-IVM Pro,• Optional Weather Sensors are programmable by station to

prevent or pause watering; up to 4 with LX-IVM and 8 with LX-IVM Pro. • Station Run Time: 0 min. to 96 hrs. •

Seasonal Adjust: 0% to 300% (96 hrs. maximum station run time), • 40 independent programs on the ESP-LXIVM

Pro • 8 start times per program,• Program Day Cycles include Custom days of the week, Odd, Odd no 31st, Even,

and Cyclical dates,• Manual Station and Manual Program starts

Supply,Fixing & commissioning Of IQ NCC 3G / ETHERNET network Communication Cartrige for IQ4 Cloud

Software. The system shall be fully programmable, providing the operator with absolute and full control of the

entire control system. The system shall have a Web Based graphical user interface (GUI) that allows easy

programming and graphical depiction of the satellite controller programming Software Capabilities: Detect

Modules, Cartridge firmware upgrade, Upload programs to Controller (Synchronize), Retrieve Controller

Programs (Reverse Synchronize) & Auto-Synchronize. Manual Functions: Start program, test program, Auto

7.04 On/Off, Turn Master Valves On/Off for manual watering, turn Flow manager On/Off and Rain Delay. Program

Adjust and ET adjust, Site Level, Controller Level, Program edit & additionally grouping based on landscape type

and sprinkler type, Define Valve Types and Sensor Types, Flow Watch based on learned flow, FloManager to

reduce overall watering time, Automatic reporting through emails, PIN code proetction, Two way

programing, Actual flow totals in the automated email reports etc. as per specifications complete .

Supply,Fixing & Commissioning of IVM-SOL Interfaces ( Integrated Valve Module) "Smart Solenoid - Field

Device'' DC output with interface module in-built in one device mountable on Solenoid Valve to connect

7.05 Controller and Valve on two wire path & it provides two-way communication between the valve and controller to

provide advanced diagnostic capability and faster response time as per specifications complete.

Supply,Fixing & Commissioning of IVM-OUT Interfaces with LX-IVM to manage 3rd party valves and external

gear such as pump stations as per specifications complete

Supply,Fixing & Commissioning of IVM-SD for surge protection on the 2-Wire path as required with copper

grounding rod, clamps, charcoal and all requisite accessories as per specifications complete

Supply,Fixing & commissioning of 6"Round box with greenlid with features Snap-in overlapping lid, Skid-

resistant lid texture,, Body built with three ridges for additional support to sidewallst & Having Dimensions @

7.08 Top Opening :6 1/8" Dia & Bottom Opening 8 5/8" Dia etc., complete, as per the instructions of

Architect/Landscape Architect/Engineer In Charge.

Supply,Fixing & commissioning of 1" Solenoid globe angle inlet Valves with provision to attach DC Latched

interface module, fabric reinforced Nitrile diaphram Material and rugged PVC construction ,compatible and

7.09 slow closing to prevent water hammer,pressure rating upto 10.4 KSC and maximum flow of 40GPM ,max

water temp. upto 42degree centigrade without AC Coil & provision to attach PRS-Dial PGA Pressure Regulation

Optional PRS-D Nos 2.00 3,350.00

Supply,Fixing & commissioning of 1.5" Solenoid globe angle inlet Valves with provision to DC Latched

interface module, fabric reinforced Nitrile diaphram Material and rugged PVC construction ,compatible and

7.10 slow closing to prevent water hammer,pressure rating upto 10.4 KSC and maximum flow of 100GPM ,max

water temp. upto 42degree centigrade, without AC Coil & provision to attach PRS-Dial PGA Pressure Regulation

Optional PRS-D Nos 14.00 5,100.00

Supply,Fixing & commissioning of 2" Solenoid globe angle inlet Valves with provision to DC Latched

interface module, fabric reinforced Nitrile diaphram Material and rugged PVC durable glass -filled nylon

7.11 construction ,compatible with and slow closing to prevent water hammer,pressure rating upto 10.4 KSC and

maximum flow of 150GPM ,max water temp. upto 42degree centigrade, without AC Coil & provision to attach

PRS-Dial PGA Pressure Regulation Optional PRS-D

Supply,Fixing & commissioning of 3'' Metal Solenoid globe Valves as central shut off valve with Nylon

reinforced Natural Rubber diaphram and Cast lron construction and slow closing to prevent water

hammer,pressure rating upto PN16 and maximum flow of 10-36 m3/h ,max water temp. upto 60°C with

7.12 9VDC - 50 Hz,coil resistance 30ohm etc., complete, as per the instructions of Architect/Landscape

Architect/Engineer In Charge.

Supply,Fixing & commissioning of PRS-DIAL Pressure Regulator to Maintain constant outlet pressure

7.13 between 1.04 to6.9 KSC

Supply,Fixing & commissioning of direct bury -on wire connector with strain relief ,UL486 D certified ,with

waterproof silicon sealant ,fits wire from 22ga to6 ga as per specifications complete DBRY

Supply,Fixing & commissioning of automatic rain shut off device ,latching hinge with multiple rainfall settings

5mm to 20mm UL CUL listed and CE approved complete RSD BEX

Supply,Fixing & commissioning of 3'' Electromagnetic Flow Sensor/ Meter with accuracy + or - 1%, with LCD

display, IP 68 protection, for flow range 10 to 50 M3/Hr, for velocity 0.10 to 5.0 MPS and it should sustained

max 15 bar pressure, with pulse transmitter, Hard Rubber internal Liner, 150 lb Cast Steel Flanges, Standard Lay

Length, Alloy C Electrodes, 316SS Grounding Rings, Remote Mounted Amplifier, Submersible Junction Box, 20m

Standard Remote Cable, and including all labour, all assembly for inlet and outlet as per OEM of flow

sensor, all complete as per specification and direction of Project in charge.

Supply,Fixing & commissioning of UPS ZEBRONICS, Stabilizer 300watts & pump relay set as per

specifications complete

Supply,Fixing & Commissioning of IVM-SEN Interfaces with LX-IVM to control weather sensors or flow sensors

as per specifications complete

Submission of Shop drawing, As built drawing, Handing over documents, Training for maintenance to

team after commissioning of the system and including Supervision, Transportation charges

Sub Total Automation Irrigation System

Total Manual Irrigation System + Automation Irrigation System

Name of work: Development of Asarwa lake garden

Horticulture work

DESCRIPTION UNIT QTY RATE AMOUNT

A SITE PREPARATION

Trenching in ordinary soil up to a depth of 60 cm including

removal and stacking of serviceable materials and then

disposing of surplus soil, by spreading and neatly leveling

1 within a lead of 50 m and making up the trenched area to Cum 7137.15 78.10

proper levels by filling with earth or earth mixed with sludge

or / and manure before and after flooding trench with water

(excluding cost of imported earth, sludge or manure).

Supplying and stacking of good earth at site including royalty

2 and carriage upto 5 km complete (earth measured in stacks Cum 3456.00 515.60

will be reduced by 20% for payment).

Supplying and stacking sludge at site including royalty and

3 carriage upto 5 km complete (sludge measured in stacks will Cum 1949.00 294.00

be reduced by 8% for payment).

4 Rough dressing the trenched ground including breaking clods. Sqm. 27758.34 1.50

5 Fine dressing of the ground. Sqm. 27758.34 3.70

Spreading of sludge, dump manure and/or good earth in

required thickness as per direction of officer-in-charge (cost of

sludge, dump manure and/ or good earth to be paid

Mixing earth and sludge or manure in the required proportion

7 specified or Cum 5405.00 36.55

directed by the Officer-in-charge

Providing & laying Selection no. 1 grass turf with earth 50mm

to 60mm thickness of existing ground prepared with proper

level and ramming with required tools wooden and than

8 rolling the surface with light roller make the surface smoothen Sqm. 1390.00 87.50

and light watering the same and maintenance for 30 days or

more till the grass establish properly, as per direction of the

officer in charge

Preparation of beds for hedging and shrubbery by excavating

60 cm deep and trenching the excavated base to a further

depth of 30 cm, refilling the excavated earth after breaking

clods and mixing with sludge or manure in the ratio of 8:1 (8

parts of stacked volume of earth after reduction by 20%: one

9 part of stacked volume of sludge or manure after reduction by Cum 9738.00 222.85

8%), flooding with water, filling with earth if necessary,

watering and finally fine dressing, leveling etc. including

stacking and disposal of materials declared unserviceable and

surplus earth by spreading and leveling as directed, within a

lead of 50 m, lift up to 1.5 m complete (cost of sludge, manure

Digging holes in ordinary soil and refilling the same with the

excavated earth mixed with manure or sludge in the ratio of

2:1 by volume (2 parts of stacked volume of earth after

reduction by 20% : 1 part of stacked volume of manure after

reduction by 8%) flooding with water, dressing including

removal of rubbish and surplus earth, if any, with all leads and

lifts (cost of manure, sludge or extra good earth if needed to be

paid for separately) :

DESCRIPTION UNIT QTY RATE AMOUNT

Holes 90 cm dia, and 90 cm deep Each 417.00 143.10

Holes 60 cm dia, and 60 cm deep Each 60658.00 43.75

Holes 45 cm dia, and 45 cm deep. Each 110800.00 18.70

Plantation of Trees, Shrubs, and Hedge at site i/c watering and

11 removal of unsaverieable material’s as per direction of officer

in charge (excluding cost of plant & water)

Tree plant Each 417.00 7.30

Shrub plant Each 60658.00 3.65

Ground cover Each 110800.00 2.45

Supply and stacking Avenue plants or equivalent of height

210cm to 240cm in big poly bags of size 25 cm as per

direction of the office-in-charge

Tall Decidious tree

Providing and stacking of Dalbergia sisoo of height 60-75 cm.

1 with 5-6 branches in poly bags of size 25 cm as per direction Nos 3.00 55.00

of the officer-in-charge.

2 P/L of Samena Saman Nos 4.00 300.00

3 P/L of Bombax Ceiba Nos 8.00 70.00

4 P/L of Butea Monosperma Nos 6.00 55.00

5 P/L of Mahua Nos 4.00 65.00

6 P/L of Neolamarkia Cadamba Nos 4.00 65.00

7 P/L of Choresia Speciosa Nos 5.00 80.00

Medium Evergreen Trees

8 Providing and stacking of Erythrina Indica nos 3.00 65.00

Providing and stacking of Cassia Fistula of height 165-180

9 cm. with 3-4 branches and thick stem in big size HDPE bags nos 6.00 65.00

as per direction of the officer-in-charge.

Providing and stacking of milingtonia of height 45-60 cm. in

10 earthen pot of size 20 cm as per direction of the officer-in- nos 3.00 70.00

11 Providing and stacking of Kusum nos 2.00 70.00

12 Providing and stacking of Guaiacum officinale nos 2.00 350.00

13 Providing and stacking of thespesia nos 2.00 80.00

14 Providing and stacking of Mimusops Elengi Bakul nos 3.00 125.00

15 Providing and stacking of Acacia Auriculiformis nos 2.00 65.00

16 Providing and stacking of Largerstroemia Speciosa nos 6.00 40.00

17 Providing and stacking of Chukrasia nos 3.00 65.00

18 Providing and stacking of pongama pinnata nos 2.00 50.00

Large Evergreen Trees

19 Providing and stacking Terminalia arjuna nos 15.00 60.00

20 Providing and stacking of cassia siamea nos 8.00 65.00

21 Providing and stacking Ficusinfectoria nos 12.00 65.00

22 Providing and stacking of Ficus Lyrata nos 14.00 90.00

23 Providing and stacking of Spathodea nos 9.00 75.00

24 Providing and stacking of Alstonia scholaris nos 7.00 65.00

25 Providing and stacking of Mangifera Indica nos 11.00 55.00

Providing and stacking of Azadirachta Indica (Neem ) of

26 height 120-150 cm. with 3-4 branches and thick stem in big nos 13.00 65.00

size HDPE bags as per direction of the officer-in-charge.

27 Providing and stacking of Grevillea robusta nos 14.00 50.00

DESCRIPTION UNIT QTY RATE AMOUNT

28 Providing and stacking of pulmeria Rubra nos 20.00 400.00

Providing and stacking of Cochlospermum Religiosum of

29 height 150-165 cm. in big polybags of size 25 cm as per nos 5.00 60.00

direction of the officer-in-charge.

Providing and stacking of Delonix regia flos-reginae of height

30 150-165 cm. in big poly bag of size 25 cm as per direction of nos 8.00 60.00

the officer-in-charge.

Providing and stacking of Jacaranda Mimosaefokia flos-

31 reginae of height 150-165 cm. in big poly bag of size 25 cm as nos 6.00 60.00

per direction of the officer-in-charge.

32 Providing and stacking of Bauhinia blakeana nos 14.00 80.00

33 Providing and stacking of purpurea nos 14.00 50.00

34 Providing and stacking of bauhinia Racemosa nos 8.00 200.00

35 Providing and stacking of terminalia mantaly nos 10.00 60.00

36 Providing and stacking of callistemon Viminalis Bottle brush nos 8.00 973.75

37 Providing and stacking of pulmeria alba nos 20.00 120.00

38 Providing and stacking of tabebuia Rosea nos 6.00 45.10

39 Providing and stacking of Cordia Sabestena nos 5.00 250.00

40 Providing and stacking of Royal Palm nos 17.00 90.00

41 Providing and stacking of Date palm nos 18.00 650.00

42 Providing and stacking of Bismarckia nos 10.00 1937.25

43 Providing and stacking of Washingtonia nos 10.00 538.15

44 Providing and stacking of Bottle palm nos 8.00 550.00

45 Providing and stacking of Travellers palm nos 5.00 484.85

Cactus Garden -

46 Providing and stacking of Euphorbia Dednroids nos 2.00 160.00

47 Providing and stacking of Prosopis Cineraria nos 1.00 54.35

48 Providing and stacking of Euphorbia Tirucalli nos 2.00 180.00

Big Trees Near Lake Pathway -

49 Providing and stacking Salix tetra sperma nos 4.00 380.00

50 Providing and stacking Azadirachta Indica nos 4.00 65.00

51 Providing and stacking pongamia pinnata nos 4.00 50.00

52 Providing and stacking Albizzia lebbeck nos 4.00 65.00

Butterfly Garden -

53 Providing and stacking of Millingtonia hortensis nos 4.00 70.00

54 Providing and stacking of Thespesia populinea nos 2.00 120.00

Fragrence Garden -

Providing and stacking of Harsingar- Nyctanthes Abrbor-

56 Providing and stacking of Sita Ashok - Saraca indica nos 3.00 80.00

57 Providing and stacking of Rat Ki Rani - Cestrum Nocturnum nos 3.00 40.00

58 Providing and stacking of Kewda - Pandanus Ordorifer nos 3.00 550.00

59 Providing and stacking of Moringa nos 1.00 100.00

60 Providing and stacking of Kadipatta nos 1.00 25.00

61 Providing and stacking of Vitex Negundo nos 1.00 180.00

62 Providing and stacking of tamarindus Indica Imly nos 2.00 80.00

63 Providing and stacking of Szyzigium Cumni - Jamun nos 5.00 75.00

64 Providing and stacking of Moras Alba - Shetoot nos 3.00 190.00

65 Providing and stacking of Psidium - Guava nos 2.00 130.00

DESCRIPTION UNIT QTY RATE AMOUNT

Supply of best quality Shrubs grown in pots/ poly bags of

species with their specification- mentioned below, which are

healthy and completely free form all disease, ready for

Transplanting, inclusive of labour, loading, unloading by

manual means and cartage. All plants tobe approved before

planting by officer-in- charge. The minimum height of plants

to be 45 cms 75 cms depending on the species.

Ornamental grass

1 Providing & Displaying of Pennisetumsetaceum nos 1600 370

2 Providing & Displaying of Cymbopogon nos 1770 250

3 Providing and displaying of Chyrsopogon zizaniodes. nos 1770 290

Water Plants - Ground Cover

4 Providing & Displaying of water hyssop nos 40 65

5 Providing & Displaying of water clover nos 51 110

6 Providing & Displaying of marsh pennywort nos 51 250

7 Providing & Displaying of ipomoea batatas nos 85 20

8 Providing & Displaying of Gotu kola creeping nos 57 150

9 Providing and stacking of bambusa vulgaris nos 570 110

10 Providing and stacking of Silver oak nos 150 50

11 Providing & Displaying of Vernonia nos 40 25

12 Providing & Displaying of Madhumalti nos 50 90

13 Providing & Displaying of pittosporum nos 400 160

14 Providing & Displaying of Ficus longisland nos 400 1230

15 Providing & Displaying of juniper nos 230 30.00

16 Providing & Displaying of hamelia patens nos 300 50

17 Providing & Displaying of clerodendrum inerme nos 250 20

18 Providing & Displaying of chyrsopogon zizanioides nos 424 250

19 Providing & Displaying of Hibiscus Rosa - sinesis nos 145 270

20 Providing & Displaying of Areca palm nos 145 350

21 Providing & Displaying of Alpinia purpurata nos 128 121.00

22 Providing & Displaying of cycus revoluta (sago palm) nos 20 1183.90

23 Providing & Displaying of Russellia Equisetiformis nos 20 330.00

24 Providing & Displaying of Livistona Rotundifolia Plam nos 20 86.10

25 Providing & Displaying of Furcaria nos 38 225

26 Providing & Displaying of Jasminum grandiflora nos 128 30

27 Providing & Displaying of Mussanenda erythrophylla nos 51 110

28 Providing & Displaying of Hibiscus snowflake (Gudhal) nos 145 120

DESCRIPTION UNIT QTY RATE AMOUNT

29 Providing & Displaying of Hibuscus varg nos 210 45

30 Providing & Displaying of Jatropha Integerrima nos 51 45

31 Providing & Displaying of Acorus calamus nos 424 80

32 Providing & Displaying of Asiatic lilly hybrid yellow nos 210 129.15

33 Providing & Displaying of Asiatic lilly hybrid lilly orange nos 210 129.15

34 Providing & Displaying of Asiatic lilly hybrid red nos 210 129.15

35 Providing & Displaying of Leucophyllum frutescens nos 210 100

36 Providing & Displaying of Allamanda Cathartica nos 210 45

37 Providing & Displaying of Ixora coccinea nos 80 280

38 Providing & Displaying of Ixora singaporesis nos 80 45

39 Providing & Displaying of Acalypha nos 424 36

40 Providing & Displaying of Aralia nos 100 70

41 Providing & Displaying of Agave augustifolia nos 51 280

42 Providing & Displaying of Pedilanthus nos 253 80

43 Providing & Displaying of bougainvillea (torch glow) nos 1020 323

44 Providing & Displaying of Zephranthus lilly nos 1570 300

45 Providing & Displaying of Asiatic lilly hybrid red nos 1260 129

46 Providing & Displaying of liriope muscari nos 1570 250

47 Providing & Displaying of Euphorbia milli nos 1570 646

48 Providing & Displaying of ruellie brittoniana dwarf nos 1570 180

49 Providing & Displaying of danelia tasmannica varg. nos 1570 350

50 Providing & Displaying of Plumbago auriculata nos 1260 60

51 Providing & Displaying of hibiscus varg. Darf nos 1260 90

52 Providing & Displaying of Murraya paniculata nos 1260 25

53 Providing & Displaying of tabernamontana nos 1260 45

54 Providing & Displaying of Duranta. nos 1570 20

55 Providing & Displaying of cestrum nocturnum nos 1020 40

56 Providing & Displaying of vinca rosea nos 1570 43

57 Providing & Displaying of Ficus panda nos 1570 35

58 Providing & Displaying of Gaint Crinum Lily nos 1240 250

59 Providing & Displaying of Caesalpinia pulcherrima nos 1240 45

60 Providing & Displaying of Lantana camara nos 1570 60

Different Colour Leaves

61 Providing & Displaying Iresine nos 199 20

62 Providing & Displaying of Excoecaria bicolor nos 71 40

63 Providing & Displaying of Ficus reginald nos 95 100

64 Providing & Displaying of Asparagus nos 71 55

65 Providing & Displaying of ornamental kale nos 199 54

66 Providing & Displaying of pleomele reflexa nos 95 280

67 Providing & Displaying of tabernamontana nos 71 35

68 Providing & Displaying of Croton nos 71 56

69 Providing & Displaying of mentha nos 40 60

70 Providing & Displaying of trachyspermum ammi nos 40 210

71 Providing & Displaying of thymus citrodorus nos 40 230

72 Providing & Displaying of rosemarinus nos 45 250

73 Providing & Displaying of origanum vulgare nos 40 280

74 Providing & Displaying of asparagus racemosus nos 45 180

75 Providing & Displaying of bacopa monnieri nos 40 55

76 Providing & Displaying of Golden Bamboo nos 50 200

77 Providing & Displaying of Cascabela thevetia nos 30 35

78 Providing & Displaying of Bhuddha Belly bamboo nos 50 461

DESCRIPTION UNIT QTY RATE AMOUNT

79 Providing & Displaying of tecoma stans nos 20 45

80 Providing & Displaying of tecoma gaudichaudi nos 20 110

81 Providing & Displaying of galphimia glauca nos 15 350

Butterfly Garden

82 Providing & Displaying of Zinnia nos 120 43

83 Providing & Displaying of Marigold (winter) nos 100 54

84 Providing & Displaying of chrysanthemum indicum nos 16 140

85 Providing & Displaying of ixora purple nos 120 160

86 Providing & Displaying of Calliandra Haematocephala nos 35 190

87 Providing & Displaying of Dracaena nos 13 113

88 Providing & Displaying of echinopsio hybrid (summer) nos 13 950

Providing & Displaying of thelocactus hexaedrophorus

90 Providing & Displaying of agave americana nos 13 380

91 Providing & Displaying of yucca (summer) nos 13 60

92 Providing & Displaying of agave attinulla nos 13 550

93 Providing & Displaying of senecio macrocephalus (summer) nos 16 320

94 Providing & Displaying of sedum (summer) nos 16 230

Providing & Displaying of sedum floriferum

weihenstelphanner [summer]

96 Providing & Displaying of echinocactus [summer] nos 16 260

97 Providing & Displaying of Crassulas [summer] nos 13 190

98 Providing & Displaying of fern nos 2120 85

99 Providing & Displaying of cyperus papyrus nos 2120 130

100 Providing & Displaying of sweet flag nos 2120 36

101 Providing & Displaying of typha latifolia nos 2120 600

102 Providing & Displaying of egyptian lotus nos 2830 300

Fragrence Garden

103 Providing & Displaying of Citrus limetta nos 66 250

104 Providing & Displaying of clematis nos 66 350

105 Providing & Displaying of citrus sinesis nos 66 260

106 Providing & Displaying of gardenia jasminoides nos 64 230

107 Providing & Displaying of mangolia nos 64 250

108 Providing & Displaying of white & pink lilly nos 66 129

109 Providing & Displaying of rajnigandha nos 66 160

110 Providing & Displaying of lavender nos 66 180

111 Providing & Displaying of Alpinia zerumbet nos 772 250

112 Providing & Displaying of sanservieria variegated nos 772 300

Providing and displaying of Schefflera high colour having ht.

25 cm to 30 cm, well developed with fresh & healthy foliage

in 25 cm size of Earthen pot/Plastic pot & as per direction of

the officer-in-charge.

114 Providing & Displaying of horsetail plant nos 772 170

115 Providing & Displaying of alocasia macrorrhiza nos 772 120

Providing and displaying of Dieffenbachia having ht. 30cm to

45 cm with 10-12 leaves, well developed, fresh and healthy in

25 cm size of Earthen pot/Plastic pot. & as per direction of the

officer-in-charge

117 Providing & Displaying of umbrella palm nos 772 80

118 Providing & Displaying of dracaena angustifolia nos 772 350

119 Providing & Displaying of philodendron selloum nos 772 162

DESCRIPTION UNIT QTY RATE AMOUNT

120 Providing & Displaying of philodendron xanadu nos 772 184

121 Providing & Displaying of chamaedorea elegans palm nos 772 108

122 Providing & Displaying of Syngonium nos 424 194

123 Providing & Displaying of Golden Fern nos 557 85

124 Providing & Displaying of Raphis excelsa nos 565 100

Providing and stacking of lantana depressa of height 15 cm to

1 20 cm, full of branches and foliage in 15 cm size of Earthen nos 9900 525.00

Pot/Plastic Pot & as per direction of the officer-in-charge.

Providing and stacking of wedelia trilobata, well developed

to 20 leaves, full of branches and foliage in 25 cm size of

Earthen Pot/Plastic Pot & as per direction of the officer-in-

Providing and stacking of lantana sellowiana Earthen

Pot/Plastic Pot & as per direction of the officer-in-charge.

Providing and stacking of cuphea ignea, of height 25-30 cm.,

4 full of branches well developed in 15 cm size of Earthen nos 13000 150.00

Pot/Plastic Pot & as per direction of the officer-in-charge..

Providing and stacking of Alternantha developed with fresh &

5 healthy in 25 cm size of Earthen Pot/Plastic Pot & as per nos 13000 50.00

direction of the officer-in-charge

Providing and stacking of Tradescantia palida plant in 15 cm

6 size of Earthen Pot/Plastic Pot & as per direction of the nos 13000 260.00

officer-in-charge.

Providing and stacking of Ophiopogon, Green/Black full of

7 leaves in 15 cm size of Earthen Pot/Plastic Pot & as per nos 13000 20.00

direction of the officer-in-charge.

Providing and stacking of Ophiopogon variegated,

8 Green/Black full of leaves in 15 cm size of Earthen Pot/Plastic nos 13000 285.00

Pot & as per direction of the officer-in-charge.

Providing and stacking of Roheo in 20 cm size of Earthen

Pot/Plastic Pot & as per direction of the officer-in-charge.

Supply of best quality house plants, hedges & ground cover,

Succulents bulbs & Rizomes, Reeds & Grasses and Acquatic

Plants grown in pots/poly bags of Species with their

specification mentioned below, which are healthy and

completely free from all disease ready for transplanting,

inclusive of Labour, loading, uploading by Manual means and

cartage. All plants to be approved before planting by Officer in

charge. The minimum height of Plants to be 15 cm to 90 cms

depending on the species.

1 Providing & Displaying of red fountain grass Nos 71.00 55.00

DESCRIPTION UNIT QTY RATE AMOUNT

Preparation of mounds of various size and shape by available

excavated / supplied earth in layers not exceeding 20 cm in

1 depth, breaking clods, watering of each layer, dressing etc., cum 600.00 401.30

lead upto 50 meter and lift upto 1.5 m complete as per

direction of Officer-in-charge.

(Maintenance work)

Comprehencive maintainence including maintaining and

operating and replacing all assets if necessary install in garden

including green space and providing supervisor, watchman,

sweeper etc and redevelopment of lawn, scrub, tree etc as

required and cleaning of external and internal pathway,

Gajiba, jogging track all benches, all dustbin,, watering plants

all overhead and under ground tanks, all stone floors and

dedos and all garden area as specified and by engaging labour

force with cost of material and labour and all taxex for all

works as directed by engineer in charge.

For 3 years (+2years expandable) Sqm. 26000.00 675.00

Providing services of Tata 407 vehicle for carriage of purned

branches/leaves of the trees from the pruning site

including loading/unloading lifting upto approved

municipal dumping ground as per direction of Engineer-in-

charge as and when required including cost of Diesel, Mobil

oil, driver and four labours all in uniform with necessary T&P

such as spade, bill hook, rope, tasla, hassion cloth, safety

cones etc., all complete. (Atleast Tempo/Tata 407 should be

loaded upto the body mark of

vehicle for counting a trip).

ESTIMATE FOR ELECTRICAL WORK- ASARWA LAKE PARK - AHMEDABAD

SUBHEAD:ELECTRICALWORK

Description Unit Qty Rate Total Amount

Description Unit Qty Rate Total Amount

A SCHEDULEITEMS

Supplying & erecting earth pit of minimum bore dia.150mm size approved make Earthing

Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of corrosion free

hot dipped G.I.Pipes having Outer pipe dia of 50mm having 80-200 Micron galvanising,

Inner pipe dia of 25 mm having 200-250 Micron galvanising, connection terminal dia of

12mm with constant ohmic value surrounded by highly conductive compound with high

charge dissipation suitable for following type of applications with chamber and heavy duty

1.1 cover. (A)(approved make OEM has to submit test certificate including value of earth

resistance of installation duly stamped and signed by agency and officer Incharge has to

ensure the value of earthing resistane mentioned in test Certificate) & having back filling

compound of (B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm / meter testing

as per IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar content:-

<2%(C) Back fill Compound :- Earthing compound should be capable to retain moisture for

long time Necessary test report must be submitted by Agency.

(c) For Electrical Installation covering Transformer Neutrals, Lightning arrester Earthing,

A.C.Plant & Sensitive Computer System(like Automation, SCADA) i.e independent Earthing

in normal soil. Length of Pipe : 3.00 mtrs

Back filling Compound :2 nos Bags of 25 Kg.

1.3 Providing and erecting HOT deep Galvanised iron strip wire 8 to 16 SWG. KG 1500 77

TOTALFOREARTHINGCARRIEDOVERTOSUMMARY

CABLE SUPPLY, LAYING, DWC HDPE PIPE, CHAMBER (MANHOLE) AND END

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium

2.1 conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe

of following size of cables

2.2 3 1/2 core 70 Sq. mm ( 35 Sq. mm 1/2 core) meter 1500 275

2.3 3 1/2 core 35 Sq. mm ( 16 Sq. mm 1/2 core) meter 1200 218

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand / Solid

3 Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing

trench / pipe of following size of cables

3.1 4 core 10 Sq. mm meter 2500 139

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand / Solid Copper

4 conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe

at road crossing or floor of following size of cables.

4.1 4 core 6 Sq. mm meter 2560 505

4.2 3 core 6 Sq. mm meter 1980 392

4.3 3 core 4 Sq. mm meter 1850 285

4.4 3 core 2.5Sq. mm meter 1500 213

Providing & laying approved make Double walled corrugated pipes (DWC) of

polyethylene(conforming to IS 14930 II )with necessary connecting accessories of same

material at required depth in existing trench for laying of cable. below ground / road surface

for enclosing cable (A)50 mm outer dia

5.1 50 mm outer dia meter 15600 62

5.2 90 mm inner Dia. meter 1890 95

5.3 120 mm inner Dia. meter 1200 136

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC

7 insulated armoured cable complete with out going tails, insulating tape etc for following

size of cables.

7.1 2 to 4 core 2.5 / 4 Sq. mm Set 250 33

7.2 2 to 4 core 6 Sq. mm Set 150 38

7.3 2 to 4 core 10 Sq. mm Set 50 38

Providing and, fixing heavy duty flange type brass double compression type cable gland

8 with rubber ring for PVC insulated armoured cable complete with out going tails, insulating

tape etc for following size of cables.

8.1 3 & 1/2 core 70 Sq. mm Set 4 102

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded

Copper conductor wire in following type of pipe to be erected concealed in /flushed on

wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green

colour for earth continuity of following size

(B) With 16 swg HGS metal conduit pipe and accessories painted black.

9.1 3x2.5sq.mm meter 1500 172

TOTAL FOR CABLE LAYING, DWC HDPE PIPE, CHAMBER (MANHOLE) AND END

TERMINATIONS CARRIED OVER TO SUMMARY

B NONSCHEDULE ITEMS

FEEDER SECTION PILLAR TYPE-A (3-4 FEEDER)

Supply, installation, Testing and commissioning of the Feeder Section Pillars as per

specifications, IS and Drawings The unit rate for each item shall include: Call for final

inspection prior to dispatch. Delivery of the fidder pillar / section pillar to site. Shifting of the

fidder / section piller from site to store to the suitable location. Shifting & Fixing of Section

Pillar. Assembly and wiring of component supplied separately. Installation of section piller

to including removing old section pillar. Earthing all components, frame etc. to a common

10 internal earth bar. M.S. parts should painted with powder coating. Supply & fixing all Set 8 49161

accessories and supporting structure. Supply & fixing of M.S. 40 x 40 x 6 channels for

fixing the panels. Connection, testing and commissioning Checking of internal connection

and wiring, operation of switches, starter, MCCB, relays, contactors etc. Supply of

necessary tools, hardware, testing equipment etc. etc. Electrical contractor shall carry out

the insulation test at site and all the readings shall be submitted in duplicate to the

consultant or engineer-in- charge. Approval from State Electricity Board &Liason work.

10.1 FEEDER SECTION PILLAR TYPE-B (2-3 FEEDER)

Supply, installation, Testing and commissioning of the Feeder Section Pillars as per

specifications, IS and Drawings The unit rate for each item shall include: Call for final

inspection prior to dispatch. Delivery of the fidder pillar / section pillar to site. Shifting of the

fidder / section piller from site to store to the suitable location. Shifting & Fixing of Section

Pillar. Assembly and wiring of component supplied separately. Installation of section piller

to including removing old section pillar. Earthing all components, frame etc. to a common

11 internal earth bar. M.S. parts should painted with powder coating. Supply & fixing all Set 8 30603

accessories and supporting structure. Supply & fixing of M.S. 40 x 40 x 6 channels for

fixing the panels. Connection, testing and commissioning Checking of internal connection

and wiring, operation of switches, starter, MCCB, relays, contactors etc. Supply of

necessary tools, hardware, testing equipment etc. etc. Electrical contractor shall carry out

the insulation test at site and all the readings shall be submitted in duplicate to the

consultant or engineer-in- charge. Approval from State Electricity Board &Liason work.

11.1 TOTAL FOR FEEDER PILLAR CARRIED OVER TO SUMMARY

12 Turnkey Factor

Providing of turnkey factor to the concirn eletric department as per the load to be opretor in

Description Unit Qty Rate Total Amount

Description Unit Qty Rate Total Amount

A SCHEDULEITEMS

(b) LED Bollard fittings of minimum height 600 mm & dia.100mm having polycarbonate

clear/milky diffuser mounted on 3mm thick aluminium finished powder coated pipe with

base plate 160x160mm with erection by M8x75mm fastner with required RCC

foundation.IP65 for 9 to 20 watt ,surge-4kv cat- III

(C) Post Top Lantern LED fitting comprises of finish cast aluminum spigot and spun aluminum canopy

2 fixed with opal polycarbonate, pipe arrangement for vertical mounting driver and accessories wired

upto terminal block.IP

2.1 (ii)32-40W Cat-III on 4M pole Each 72 6193

Supply of approved make frp/grp pole having followiing specifications :

FRP/GRP pole made by centrifugal moulding process using thermoset resin polyester/epoxy

resin system having minimum glass content 45.0%.The pole should be in one pieceand tapered

round in shape,having smooth outside surface finish and should be totally fre from

corrosion as well as non conductive and shock proof. Pole should be provided with FRP/GRP base

bracket dully fabricated from metal(M.S) and dully claded with FRP/GRP material to avoid any metal

exposer and painted with PU paint. Pole should mechanical properties i.e

Specfic gravity (ASTM D 792) 1.3-1.8 Kg/m3, 2. Glass Content % by weight (ASTM D 2584)

45.0 -55.0%, 3. Water absorption (ASTM D 570) <0.5%, 4. Tensile Strength(ASTM D 638)

200+/-50Mpa, 5. Flexural strength (ASTM D 790) 250+/-50Mpa, 6. Compressive Strength (ASTM D

695) 200+/-50MPa, 7. Yeild Strength(ASTM D638) 250 +/-50MPa. Pole should be flame retardant as

per IS 6746.Resin used shall be UV resistance and pigmented. Pole should be painted with first coat

of epoxy primer and then two coat of highly weather resistance polyurethen paint to ensure proper

addhesion of the paint.Minimum thickness shall be 80 to 100 micron.Defelection of the pole shall

not exceed more than 10.0 % of the length of the pole for the given load.Pole should be generally

made as per the dimensional data, performance criteria and some interchagebility features of poles

as per the standard ANSI C123.20 latest version of ASTM D 923/01 including cable termination box

accessories.The size of pole and type of installation with foundation , Anchor Base & Internal

junction box as per the

Pole should be flame retardant as per IS 6746.Resin used shall be UV resistance and pigmented. Pole

should be painted with first coat of epoxy primer and then two coat of highly weather resistance

polyurethen paint to ensure proper addhesion of the paint.Minimum thickness shall be 80 to

micron.Defelection of the pole shall not exceed more than 10.0 % of the length of the pole for the

given load.Pole should be generally made as per the dimensional data,performance criteria and

some interchagebility features of poles as per the standard ANSI C123.20 latest version of ASTM D

923/01 including cable termination box with necessory accessories.The size of pole and type of

installation with foundation , Anchor Base & Internal junction box as per the manufacturer details

and site requirement .

3.1 (3) 'B' class (Heavy Duty) frp/grp pole suitable for base plate mounting

[B] Overall Length of 4.0 meter, Average thickness : 4mm, Top/Bottom Outside Dia. 76/143mm

+/-2.Weight of Pole 10.0 Kg approx. (Without base) Metal Anchor Base dully frp claded (Size : 290 Ø Each 72 14606

* 12mmthk , Mounting hole PCD 240mm * 4 nos. of 16 Ø hole)

[D]Overall Length of 6.0 meter, Average thickness : 5mm, Top/Bottom Outside Dia. 76/176mm

3.2 +/-2.Weight of Pole 19.0 Kg approx. (Without base) Metal Anchor Base dully frp claded (Size : 340 Ø Each 0 21318

* 12mmthk , Mounting hole PCD 285mm * 6 nos. of 20 Ø hole)

[H] Overall Length of 10.0 meter, Average thickness : 9mm, Top/Bottom Outside Dia. 76/244mm

6.2 +/-2.Weight of Pole 62.0 Kg approx. (Without base) Metal Anchor Base dully frp Each 8 43801

claded (Size : 450 Ø * 18mmthk , Mounting hole PCD 390mm * 6 nos. of 20 Ø hole

Providing 1:2:4 cement concrete foundation & 70 % PCC from bottom including excavation for the

pole of size 45 x 45 x 100 cm. Deep in below ground level with plinth of 45 cm x 45 cm (or 45 cm dia

x 45 cm) high upper ground level with necessary curing and finishing in approved manner. ( for 4 &

Providing cement concrete.for foundation or for concrete filling in 1:2:4 ratio with 20 to 25 mm

stone metal duly plastered with necessary curing for pole muffing or any other purpose.

Supplying and erecting LED street light / Flood light fittings with High power White LEDs

wattage of 3 Watt and above assembled on single MCPCB, efficiency more than 130 lm/w

and corrosion free High pressure die cast aluminum housing with smooth finish powder coated and

heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses, with toughened glass

with company mark/name engraved or embossed 160 to 270 V,Power

Factor more than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy>

7 100 lumens/watt . LED driver efficiency > 85 %.( fittings required LM- 79 & LM-80 certificates)(NOTE:

Below description have shown ranges of Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.)

(B) Flood Light (IP-65), Surge protection -4KV integral and ,Light must have 440VAC line

supply with over-voltage protection.

7.2 (v) above 160 to 200 watts Cat-III Each 48 11451

7.2 (v) above 200 to 250 watts Cat-III (cylindrical type) Each 0 12726

Supplying, erecting, testing, commissioning approved make M.S. Polygonal High Mast Pole

having following general Specification. (a) Polygonal Section fabricated from M.S. Plate confirms

BSEN 10025 & Hot deep galvanized minimum 65/86 micron (as per IS 2629 /1985) Lantern carriage

with ring and rubber lines for erection of luminaries of suitable site. (b) Maximum telescopic section

not more than four (c) Double drum gear pipe motorized winch with 6mm dia S.S. Rod (For 16 mtr

and above size) (d) Approved make L.E.D. aviation light = 1 No. Lightening arrestor = 1 No. with

necessary wiring of 2.5 sq.mm 5 core ISI copper cable Unarmoured. (e) Bottom most section

suitable for mounting reversible motor and switchgears having door not more than 1400mm x

300mm with waterproof gasket & hinges & locking arrangement. (f) Pole structure comprises

suitable size of reversible motor, cable and necessary switchgears with control panel.

(g) bottom section shall have suitable size of thickness supports ribs foundation bolts nuts

etc. (h) Item not comprises the cost of lanterns. (i) Necessary Cement Concrete foundation as

per IS including testing & commissioning of the entire structure for following size of High Mast

[3] High Mast 16 Mtr. TOP A/F 150 mm, BOTTOM A/F 450 mm, No. of Sec. No. - 2, Bottom Thickness

- 4 mm, Top Sec. 3 mm, Size of Base Plate - dia.560 mm x 20 mm thick, Foundation Bolt Size M24 x

880 mm, Qty - 8 Nos., Suitable for mounting Fitting of Light - 8Nos.

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt

assembled on single MCPCB, with housing used as a heat sink shall be made of thick

sheet Steel conforming to IS: 513/CRCA/aluminium pressure die cast powder coated and high U.V. &

corrosion resistance with diffuser housed in aluminium casted body with company mark/name 160V

to 70V,Power Factor more than 0.95, THD < 15 %, CCT 3000 K to 6500K, Luminaire efficacy>

umens/watt , LED driver efficiency > 85 % ( fitting required LM-79 & LM-80 Certificates)(NOTE:

Below description have shown ranges of Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.)

(A) Square/ Circular shaped Surface/Recessed Mount Downlight with provision for spring

loaded mounting clips complete.IP20

(iv) 22-24 watts, Surge-2 KV Cat-lll Each 65 751

(D) LED Strip Light

(i) Minimum 4.8W-120 LED per meter (2 wire, IP-65) with non integral suitable Driver complete Cat-

(E) Under Water Light,12V DC including Driver,IP-67 with die-cast/deep drawn housing with impact

resistance clear toughened glass.

(ii) 12 watts Cat-lll Each 0 1022

G) Step Light having Aluminium die cast and

8.1 ABS Plastic material. Each 78 568

(i) 5 watts, Direct/Indirect luminaire Cat-lll

TOTAL FOR LIGHT FIXTURE CARRIED OVER TO SUMMARY

SITC of 40W Height 4200mm, Light Distribution 360° diffuser height 2310mm Electronic driver

ON/OFFLight Column. IP rating IP65, IK-10, Colour Temperature : 3000K Light Distribution :

Symmetrical, Extruded aluminium bottom ribbed pipe (grade 6063 with test certificate) Ø166 x 3mm

thickness & die-cast aluminium top cover. SS fasteners. Pre treated silicone gaskets. PDC aluminium

service door 348mm height x 110mm width at 338mm height above the base plate shall be provided

with the company logo embossed on the bottom of the door and safety rope. The control gear tray

is prewired with 2.5 Sq.mm cable, 6A MCB and 32A terminal connectors for loop-in / loop-out

arrangement. MS mounting plate Sq. 250 x 12mm thick steel of grade E250 to IS 2062:2011 with

elongated holes 38 x 19 to suit M16 bolts at CC180. This mounting steel plate along with foundation

bolts of suitable size to be used for ensuring firm grouting into the specially designed foundation

pole. Hot dip galvanised foundation bolt. Mechanical resistance IK10.Pure polyester powder coated

process : Mild shot blast & pure polyester powder coating. Translucent polycarbonate diffuser of

3mm thickness with light emission. Lamp fixed position. This luminaire contains built-in LED

modules. LED modules are engineered accordingly to the existing regulations of Lumen

Maintenance (LM80) and Technical Memorandum (TM21), Lifespan of the luminaire > 60,000 hours

at 40°C. Operating ambient temperature range is from -15°C to +50°C. Driver efficiency >85%, power

factor >0.9, THD <10%, Surge protection 6KV. Column Light.CE and BIS.

Supply, installation, testing and commissioning of tree up lighter Adjustable ground recessed Led

fixture tree up light, 3W LED light for tree up lighter. Fixture shall have Ingress protection of IP

1 for the optical part and the driver suitable for exterior grade installations. Make Philips, Havells Each 28 9631

/Crompton specifications to be approved by consultant before procurement. foundation included as

TOTAL FOR LIGHT FIXTURE CARRIED OVER TO SUMMARY

ESTIMATE FOR ELECTRICAL WORK- ASARWA LAKE PARK - AHMEDABAD

SUBHEAD:ELECTRICALWORK

Description Unit Qty Rate Total Amount

Description Unit Qty Rate Total Amount

A BUILDING (Toilet , Guard room & Community center)

DISTRIBUTION BOARD & INTERNAL WIRING

DISTRIBUTION BOARD

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface

mounted fitted with busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 &

1860 IEC 61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The DBs should be used

of same company of MCB to be used) suitable for single phase incoming and horizontal

single phase outgoing

(b) sheet steel bouble door (IP 43)

1871 8 way, sheet steel double door Ea. 12 1141

Providing & erecting 240 V MCB double pole switch for lighting Load (B Curve) having

KA breaking capacity & confirms to IS: 8828 in existing box having following capacity

40 amps DP Cat.III Nos 12 293

providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to operate

1739 on 240 V A.C. system and having breaking capacity 10 KA to be erected in existing box.

confirming to IS 8828/1996 with ISI Mark

1742 Single pole Nos. 72 111

providing and erecting Approved make RCCBs conforming to IS: 12640 and having

sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA and suitable for operation

on single phase 240 V,50Hz. having characteristic of quick action & tripping with all

advance feature & do not incorporate any electronic component. for following Max, rating

erected as directed

40 amps DP Cat.III Nos. 12 2213

Total carried over to Summary

INTERNAL WIRING

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are

of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr

length , in below type of pipe erected with 6A Modular type switch / bell push &

11 accessories and earth continuity of following type, erected on PVC / Metallic/Wooden box,

single mounting base frame covered with textured/metallic/white front plate modules

erected on / in wall / ceiling as per pipe erected, with necessary Lamp holder/ceiling rose /

H.D.Connector as directed.

(g) with 16 swg HGS metal conduit pipe and accessories painted black. erected concealed

in wall/ceiling complete Cat. III

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of .ISI

marked 1.1 KV Grade FRLS PVC insulated multi strand copper wires up to 10 mtr length, in

below type of pipe erected with 6A Modular type switch and hum free EME step type

electronic fan regulator mounted and accessories with earth continuity of following type

erected on PVC / Metallic/Wooden box, single mounting base frame covered with

textured/metallic/white front plate modules erected on / in wall / ceiling as per pipe erected.

with necessary ceiling rose / H.D.Connector as directed.

(g) with 16 swg HGS metal conduit pipe and accessories painted black. erected concealed

in wall/ceiling complete- Cat. III

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded

Copper conductor wire in following type of pipe to be erected concealed in /flushed on

wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green

colour for earth continuity of following size

(B) With 16 swg HGS metal conduit pipe and accessories painted black.

(c) 3 wire 1.5 sq. mm Mtr. 1550 147

(d) 3 wire 2.5 sq. mm Mtr. 650 172

providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded

Copper conductor wire in following type of pipe to be erected in / on wall / ceiling with

sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth

continuity of following size

(B) with 16 swg HGS metal conduit pipe and accessories painted black.

(d) 3 wire 4 sq. mm Mtr. 250 202

(e) 3 wire 6 sq. mm Mtr. 75 266

(f) 3 wire 10 sq. mm (use earth wire of 4 sq.mm ) Mtr. 250 389

(i) 4 wire 10 sq. mm (use earth wire of 4 sq.mm ) Mtr. 650 478

Providing & erecting following type of Modular Type Accessories with necessary

connection. As desired by Engineer In charge

(1) 6 Amp. SP one way switch Each 20 27

(2) 16 Amp. SP one way switch Each 15 51

(3) 6/16Amp. Universal socket Each 15 82

(4) 6 A socket Each 20 42

Supplying & erecting 20 Amp 10 KA ‘C Curve’ single pole MCB with 20 Amp. Plug socket,

company fabricated powder coated sheet steel enclosure erected as directed with

[A] Metal Clad Socket with metal clad top

Cat.III Each 6 522

SITC FANS & LIGHT FIXTURES

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt

assembled on single MCPCB, with housing used as a heat sink shall be made of thick

sheet Steel conforming to IS: 513/CRCA/aluminium pressure die cast powder coated and

high U.V. & corrosion resistance with diffuser housed in aluminium casted body with

company mark/name 160V to 270V,Power Factor more than 0.95, THD < 15 %, CCT

K to 6500K, Luminaire efficacy> 85 lumens/watt , LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges

of Wattage capacity of LED fittings.The Engineer incharge may select any

wattage capacity between the ranges shown.)

(A) Square/ Circular shaped Surface/Recessed Mount Downlight with provision for spring

loaded mounting clips complete.IP20

(iii) 16-20 watts, Surge-2 KV Each 150 584

(H) Mirror Light 9 Watts, wall mounted minimum 1 feet long Each 20 309

Supply, Installation, Testing and Commissioning of suitable 1200 sweep, BEE 5 Star rated,

Ceiling fan with Brush Less Direct Current (BLDC) permanent ferrite magnet Motor, class of

insulation: B, Rust free 3 nos.Aluminium blades, 2 nos. canopies, shackle kit with earthing

provision, copper winding, Power factor not < 0.9, Service Value (CMM/W) minimum 6.85,

Air delivery minimum 215 CMM, 350 RPM,230v (tolerance as per IS : 374-2019), THD <

10%, with remote unit for Speed Control and all remaining accessories including safety pin,

nut bolts, washers, temperature rise = 75 degree C (Max.), suitable for 140 to 285 Voltage

and rectifier circuit with surge, over current and overload protection , 50 Hz, Single phase

AC Supply, earthing etc. Complete as required.[ Make shall be approved by Engineer in

(B) 1200 mm Sweep (48") Each 10 2857

Supplying & erecting single phase approved make industrial exhaust fan suitable for

medium duty ring mounted low noise operation suitable for medium duty having following

dia size and maximum speed in RPM

[B] 380 mm dia 900 RPM Cat.II Each 8 2713

Supplying Table fan approved make A.C. 23OV, 50 c/s. 40 cm. sweep oscillating complete

with 3 mtrs. of 3core round flexible wire and 3 pin plug top. [ Make shall be Each 0 1823

approved by Engineer in Charge]

ESTIMATE FOR ELECTRICAL WORK- ASARWA LAKE PARK - AHMEDABAD

SUBHEAD:FOUNTAIN WORK

Description Unit Qty Rate

Supply, Installation, Testing & Commissioning of Interractive Water Fountain with Multi

Colour Illumination suitable for 7.2mtr dia Fountain Equipment/Nozzles -24no. 23mm Foam

jet (Bronze) with Ball joint (Brass) with Inlet Pipe arrangements as required.

Interconnecting Plumbing - between Pumps and Fountain Nozzles with UPVC pipes (sch

40) & UPVC Fitting(sch 80) and Control Ball valves (UPVC) as required. Pump -of 1no.

Submersible pumpset for Fountain operating on 3phase 415V AC Supply having 760LPM

Discharge at 8mtr Head (3HP) & 1no. Submersible pumpset for Fountain operating on

3phase 415V AC Supply having 1600LPM Discharge at 8mtr Head (7.5HP) with suitable

pipe connection and 2no. stainless steel 304 grade Suction Strainer as required. Pump

make- KIRLOSKAR Illumination - 24no. Stainless steel body Underwater light fitting IP68

grade operating on 12V DC Supply - 24W LED Bulb RGB including fixing clamps and

necessary Looping Cables within the Pond as required. Interconnecting Control Cables -

Submersible cables of suitable sizes - 2Runs x 4Core x 2.5sqmm Copper Coductor

Round Flexible cable and 2Runx 3Core x 4sqmm Copper Coductor Flat Flexible cable and

67 Earthing Conductors including suitable PVC junction boxes with terminations with suitable

PVC Conduit pipes from Fountain Pond to Control Panel (approximately 30mtr) as

required.Cable make- POLYCAB/FINOLEX SS Mesh Cover-4' x 3' size of wire mesh of

size 20mm x 20mm x 2mm thick made up of stainless steel 304 grade materials and

covered with 1mm opening fine mesh (ss304) to protect the pump from the dust and

garbage articles etc,. as required. Music System- Music system consists of 1no. PA

Amplifier with Built-in Digital Player model-TZA-7000DP, 2nos. Box speakers model-SRX

500 with necessary Junction boxes, Interconnecting wiring between Speakers, PA Amplifier

with suitable wires and PVC coduit pipes & fittings as required. PA system make- AHUJA

Fountain Controller Unit- Outdoor type Control Panel made out of MS sheet including Door

with locking arrangement with powder coated finish along with – 1no. 100A TPN Incoming

MCCB, 2nos. Starters with O/L Relay for Pump, 1no. single preventor, 1no. 2 Pole MCB

for Lights, 2no. 230v/12v DC Power supply for Lights, 2no. RGB Controller Unit for Lights

Colour changing, 2no. 24Hrs Timer for Automatic ON/OFF (for Pump and Light) including

Panel wiring etc,.as required. 1SET

Long body Clear Stream jet Nozzle

Nozzle Specification: - Bronze/Gunmetal/Brass 24 NOS.

Supply & Fixing water proof high power LED lights watt, and

9x3=27Watts color changing RGB/Multicolor made out of stainless steel 304gr. 24 NOS.

Make: River Fountain

Solenoid Valve for Nozzle control by PLC and VFD based electrical panel. 24 NOS.

DCC Programmable SMPS controller for lights 3 NOS.

Supply, Installation, Testing & Commissioning of Heavy Duty VFD (Variable Frequency

Drive) for 3 HP Pump to generate slow motion 24 NOS.

Supplying installation testing and commissioning of Open well submersible Pump Set with

totally enclosed water filled squirrel cage

induction motor water lubricated with oil seals with sleeves and thrust

bearing having all rotating parts dynamically balanced for silent operation Suitable for three

phase 10HZ AC supply Motor Body: CI Pump Body: CI Capacity: 3- HP Three Phase

Programmable panel with BFD

1. With code-based technology

(new concept in INDIA)

2. Pre-Programmed Technology y general Concept in INDIA These all technology is

supported by our controller. 1 NOS.

Electrical material

Make: - Polycab wires/National/Kalinga complete as per the direction & entire Satisfaction

of Engineer in charge.

(A) Three core flat type 2.5 Square mm

(B) Four Core 1.5 square mm. (C) Two Core 1 square mm. - 1 LOT

Plumbing (Piping) Work: Supplying and Fixing of UPVC, PVC & Pipe (10 & 6 Kg/cm2) of

Make: -Prince/Supreme/Prakash or equivalent confirming to IS

4985:2000 including all UPVC fitting i/c jointing with good quality - 1 JOB

solvent of following sizes. All fixing to be done to the entire satisfaction and sample

approved by Engineer-In-charge.

Audio power amplifier (250 watt) Make -: Stranger / National /Ahuja

OL protection /OV protection / High-fidelity (Hi-Fi) -1 NOS.

Supply and fixing of 50Watts - speakers with etc., complete as per standard specifications. -

SS-304 – 16mm thickness Grating for Nozzle -24 NOS.

Drawing/ Design/Installation /Testing /Commissioning - 1 JOB

FOAM & JET FOUNTAIN 63 Mtr. LONG

Submersible Open well pump 7.5 hp 3 phase high discharge for foam nozzle - 3 NOS.

Geyser Nozzle 1” MOC- Brass - 42 NOS.

Colum Jet Nozzle 1”, MOC - Brass - 8 NOS.

Star Delta Starter Electric Panel for fountain electrical equipment’s - 1 NOS

Submersible Led light colour changing, IP

27-watt, 12 V DC Supply. SS Body - 50 NOS

Step down transformer LED light controller

220/12 v. DC supply. 3 NOS

Necessary electric work as a conducting, wiring, cabling, current water proofing, submersible tape and

electric tape. - 1 JOB

Necessary plumbing work, PVC Pipe 10kg pressure and PVC fitting as a Tee, elbow,

MTA, FTA, Socket, wall valve, solvent - 1 JOB

Drawing, Design, Installation & Supervision

Providing, laying and fixing in place fountains including all fixtures like plumbing items for butterfly dome

etc as per drawings and the directions of engineer in charge. - 1 SET

Total for fountains

ESTIMATE FOR ELECTRICAL WORK- ASARWA LAKE PARK - AHMEDABAD

SUBHEAD:SUBMERSIBLE PUMPS

Description Unit Qty Rate Total Amount

Description Unit Qty Rate Total Amount

A SCHEDULEITEMS

SUBMERSIBLE PUMPS

S.I.T.C. submersible pump set for bore of 200 mm. dia. or more having 3 phase motor capacity

about 25 H.P. and discharge capacity having . Lifting and Lowering taken extra.

(A) (12 Stage) 472 to 330 L.P.M. discharge at the head 120 to 192 mtrs. suitable for 65 mm

dia. delivery pipe Cat-III

Providing and erecting ISI marked PVC insulated PVC Sheathed Flat flexible Submersible copper

cable approved make of following Size.

(E) 3 Core x 10 Sq. mm. Mtr 400 293

Supplying & erecting ISI Marked (Embossed) following size of “B” Class G.I . Pipe & erecting

as directed by Engineer-in-charge with necessary plumbing as desired.

(C) 40 mm dia Mtr 500 210

TOTAL FOR LIGHT FIXTURE CARRIED OVER TO SUMMARY

ESTIMATE FOR ELECTRICAL WORK- ASARWA LAKE PARK - AHMEDABAD

SUBHEAD:WATER COOLER & RO

Description Unit Qty Rate Total Amount

Description Unit Qty Rate Total Amount

A SCHEDULEITEMS

WATER COOLER & RO

Providing & Erecting full SS Body (SS 304) Split type water cooler having storage capacity 160 to

Ltr.(Tank SS 304) & Cooling capacity 150 ltr. Per hour @ an ambient temp of 350 C.The outlet temp.

of the water should drop by 150C within a hour,The water cooler should be comprising of

hermetically sealed Reciprocating compressor with R134A, fan motor, Copper Condensing unit with

company fabricated Outdoor Unit water tank surrounded by evaporating coil, thermostats, relay

etc.complete with necessary copper tube & Insulation, M.S Chanel Stand with Painting for

water tank & M.S. Powder Coated Stand for Outdoor unit with Installation. With DPELCB and 4 Way

DB Box with accessory Three core Cord for connection.

Supplying & erecting 5 stage single reverse osmosis water purification system with M.S. powder

coated frame, prefilter housing with 'O' ring presediment filter GAC filter, carbon filter suitable

buster DC pump capacity 80 psi, mention with 40 psi inline type post carbon filter auto low & high

pressure switches with following size of storage tank & LPH capacity & erected as directed

[C] 50 Ltr / Hr with 150 psi 2 nos booster pump Each 4 24153

TOTAL FOR LIGHT FIXTURE CARRIED OVER TO SUMMARY

ESTIMATE FOR ELECTRICAL WORK- ASARWA LAKE PARK - AHMEDABAD

SUBHEAD:ELECTRICALWORK

Description Unit Qty Rate Total Amount

Description Unit Qty Rate Total Amount

1 AUDIO & CCTV SYSTEM

SUPPLY, INSTALLATION, TESTING & COMISSIONING OF HIGH-SPL FOREGROUND

MUSIC SPEAKER WITH A 8" LF8 DRIVER OR BETTER AND EMB2S EXTENDED HIGH-

FREQUENCY COMPRESSION DRIVER, BIAMPLIFIED 2WAY ARRAY LOUDSPEAKER

SYSTEM; WITH INDIVIDUAL MODULE FREE FIELD FREQUENCY RANGE (-10DB) OF

80HZ - 18KHZ OR BETTER & PEAK POWER HANDLING OF >= 800W LF . THE

LOUDSPEAKER MODULE SHALL HAVE A MAX. SPL (PEAK) OF MF/HF>= 121DB OR

BETTER. IT SHOULD HAVE HORIZONTAL NEAR DISPERSION PATTERN OF 90º OR

BETTER, VERTICAL DISPERSION OF THE ARRAY SHALL BE 60º OR BETTER. THE

MODULES SHALL HAVE A WEATHER RATING OF IP55. including SUPPLY,

INSTALLATION, TESTING & COMMISSIONING OF OEM AU SHAPE MOUNTING

ARRANGEMENT FOR SUSPENSION OR WALL MOUNTING OF THE MODULES

OFFERED ABOVE.MAKES.

SITC OF 8 CHANNEL CLASS D NETWORKABLE POWER AMPLIFIER WITH A MAX

OUTPUT POWER OF 8X500W@8 OHMS, OR BRIDGED MODE OUTPUT POWER OF 4X

1000W @ 8/4 OHMS. 20HZ - 20 KHZ, SNR OF 102DB AND THD + N OF <0.4% WITH

BUILT IN PROTECTION SUCH AS LIMITERS, TEMPERATURE, DC, SHORT CIRCUIT,

45 PEAK CURRENT LIMITERS, TURN ON DELAY ETC. BUILT IN DSP FOR MATRIX Nos. 2 251,160.00

ROUTING, SPEAKER EQUALIZATION, DELAYS, ARRAY EQS ETC. COMPLETE WITH

ETHERNET PORT FOR NETWORK CONTROL, PROGRAMMING AND MONITORING.

SHALL OFFER OPTIONAL NETWORK AUDIO CONNECTIVITY (DANTE OR COBRANET)

THROUGH EXPANSION SLOT. .MAKES. JBL

SUPPLY, INSTALLATION, TESTING AND COMMISSIONING OF 2 CONDUCTOR

AWG(168 X 34) OXYGEN-FREE BARE COPPER (HIGH CONDUCTIVITY) CABLE NEC

46 TYPE CM AND CL3 TYPE FOR AUDIO ONLY WITH DC RESISTANCE: 1.60 Ω/1000FT. Roll. 2 28,704.00

,MUTUAL CAPACITANCE: 22.3PF/FT.,VOLTAGE RATING: 300V,MAXIMUM CURRENT:

17A@25˚C, AND CABLE ROLL PACKING -500 MTR. .MAKES. BELTEN

SUPPLY, INSTALLATION, TESTING AND COMMISSIONING OF CAT6 UTP 23AWG

TWISTED PAIR ARMORED CABLE, SUPPORTS GIGABIT ETHERNET (1000 BASET)

STANDARD. OPERATES AT BANDWIDTH OF 250 MHZ. THIS CABLE WELL EXCEEDS

THE REQUIREMENTS OF TIA/EIA-568-C.2.,CONDUCTOR RESISTANCE (DC):

OHM/1000 MTR @20°C MAX,IMPEDANCE: 100±15% OHM AND TEMPERATURE

RATING: -20° TO + 60°C .ROLL PACKING:305 MTR.ENHANCED PERFORMANCE

CABLE FOR TRANSMISSION OF HIGH SPEED DATA, DIGITAL AND ANALOGUE VOICE

AND VIDEO (RGB) SIGNALS ON LANS. MAKES- D-LINK

SITC OF WEATHERISED ENCLOSURE FOR AUDIO AMPLIFIER WITH FRONT DOOR,

FRONT AND BACK ADJUSTABLE MOUNTING RAILS, 1 FAN MOUNTING PROVISION,

TOP AND BOTTOM CABLE ENTRY PROVIDES OPTIMAL FLEXIBILITY FOR CABLE

MANAGEMENT,EASY WALL MOUNT PROVISION, EASY INSTALLATION- STANDING /

WALL MOUNTING OPTION COMPATIBLE WITH INTERNATIONAL STANDARDS AND

ENCLOSURE DIMENSION'S ARE WXDXH (600 X 600 X 340 MM). MAKES- LIBERTY

TOTAL FOR AUDIO SYSTEM CARRIED OVER TO SUMMARY

Supply, Installation, Testing and Comissioning of USB Full HD 1080p@30fps Web Camera,

1/3”, 2.07MP sensor, 60 Degree FOV, built in Mic, 360 degree manual rotation, privacy

3355 shutter, MJPEG compression format, Auto Focus, Auto white balance & other image Each 4 17,122.00

processing algorithms, USB 2.0, BIS, CE,FCC, RoHS certified,

[Approved by Competent Authority i.e. not Below the rank of Executive Engineer ]

SITC of CENTRAL CONTROL UNIT For DCN Next Generation or DCN wireless systems, or

a combination of the two In single‐CCU; maximum 245 wired contribution units, plus

wireless delegate units For multi‐CCU systems, with up to 30 CCU’s and a total of

contribution units Voice activated microphone mode for wired and wireless systems Ethernet

connection for configuration and control computers [Approved by Competent Authority i.e.

not Below the rank of Executive Engineer ]

Supply, installation, testing and commissioning of 42" Video Display System with Network

Video Recorder , Live view/Resolution 5MP/3MP/1080p/720p,Motion Detection Control

Privacy Mask Control. USB interface-1 × USB 2.0 and 1 × USB 3.0,Security-HTTPS, SSL,

Watermark, User Authentication, Miscellaneous-N+1 hot spare. Alarm in/out -4 / 1,Network

interface-1 RJ-45 10 /100 /1000 Mbps self-adaptive Ethernet interface, Security-HTTPS,

51 SSL,Video/Audio output-VAG,HDMI and Audio. Watermark, User Authentication,Incoming Nos 1 486,129.50

bandwidth-100Mbps,Outgoing bandwidth-80Mbps,HDMI output,VGA Output,Protocol-IPv4,

IPv6, TCP/IP protocol, PPPoE, DHCP, DNS, DDNS, NTP, SADP, SMTP, SNMP, NFS,

and iSCSI are supported.TCP, UDP and RTP for unicast, UPnPTM, ONVIF, PSIA,Support

100 IP Camera, 2 SATA interfaces for 4 HDDs Upto 6TB for each disk. Make-

Tyco/Mobotix/Pelco

SITC of 20 x SFP ports

4 x Combo 10/100/1000BASE-T/SFP ports

4 x 10G SFP+ ports

6 kV surge protection on all RJ-45 access ports

Switch Resource Management (SRM) for flexible

management of system resources

Redundant Power Supply (RPS) support

MPLS L2VPM/L3 VPN support

Full L3 routing protocol support including OSPF, BGP, and

ISIS for IPv4/IPv6

SDN-enabled switch, compatible with Openflow

10-GbE SFP+ to SFP+ 1M Direct Attach Cable [Approved

by Competent Authority i.e. not Below the rank of Executive

53 Surge protector for Video & power signal to Safeguard the camera from any kind of Surges Nos 2 3,230.00

54 42U Rack including all accessories as complete as required. Nos 1 90,412.00

55 12U Rack including all accessories as complete as required. Nos 1 36,943.00

SITC of PATCH CORD LC-LC SM DUPLEX LENGTH- 3m

56 [Approved by Competent Authority i.e. not Below the rank of Nos 5 1883

Executive Engineer ]s required.

Cat 6 information outlet that should confirm or exceed component specifications TIA/EIA-568-

B.2-1 standards for physical & electrical Specifications, should be fully unshielded type and

should have the tool less mechanism with inbuilt crimping tool and it should be Third Party

certified and tested including G.1. Box & Modular cover plate, (RJ- 45).

SITC of Patch Panel Cat 6 UTP Keystone Type- 24 Port-Fully Loaded

[Approved by Competent Authority i.e. not Below the rank of Executive Engineer ]

Supplying, installing, testing and commissioning of UL Listed ONVIF Compliant 16 channel Network

58.0 Video Recorder with 2 SATA HDD Slots with storage of 8 TB storage , Recording Bandwidth up to Nos 1 99,950.00

320 Mbps , Recording Resolution 8MP(4K) , 5MP ,3MP,2MP,1.3MP,1MP, Alram I/O 16 Ch Alarm in

1Ch Alarm out , Ethernet RJ-45 (1000 Mbps)

BRE Global certified 3c x 1.5 sq.mm Fire Survival armoured cable with Class-2 Copper

conductor as per BS EN 60228, twisted, with Mineral ceramic glass fire barrier tape covered

by an extruded layer of Cross-linkable Low smoke zero halogen (LSZH) insulation as per BS

EN 50363 and 1.SZH inner & outer sheath as per BS:7846. Should retain Circuit integrity as

per clause 26 2e of BS: 5839-1. BRE Global & LPCB-FPC certificates to be provided. Outer

sheath should be Anti-Rodent

60 IP 66 rated whether proof Junction Boxes for Camera Nos 10 6,805.00

61 HDPE Duct (40 mm) complete with all accessories as required. Mtr. 850 107

62 Underground/Over ground Laying of HDPE Pipe, OFC/ Power! Data/ Coaxial cables- Mtr. 850 777.00

63 SITC Armoured 6 Core Optical Fiber Cable Single mode for induvial junction connection. RM 850 239.00

64 Supply & laying of Cat-6 Armoured Cable for out door camera RM 400 102.00

TOTAL FOR CCTV CARRIED OVER TO SUMMARY

ESTIMATE FOR SOLAR WORK- ASARWA LAKE PARK - AHMEDABAD

S.N. DESCRIPTION UNIT QUANTITY RATES AMOUNT

1 Supply, Installation, Testing & Commissioning of following size of Grid Tied Solar

Power Plant with

Solar Panels (ALMM approved): Frame Material : Anodized Aluminum alloy Frame

With Twin Wall Profile, Front Cover : High Transmission Low-Iron Tempered Glass

(AR Coated), High efficency and positive power tolerance Pmax: 0/+5, Module

Efficiency should be approx. 19.5%-22%, Normal operating temperature 45'C,

Junction Box with Waterproof IP67 & MC4 Compatible and Enclosed with Bypass

diodes, 100% Electroluminescence test to ensure error free Modules, Thep. temp.

co-efficient of the PV module shall equal or better than -0.45%/degree C. Solar PV

modules of minimum fill factor 75% to be used. Unit Production:- More than

Unit /kw /day (Actual)(1Year Avg) With 10 year Product warranty and 25 year

Linear Power Warranty includes all mechanical and electrical parameters of the

Solar panel. Modules must be complied to the DCR(Domestic content

requirements). The Ration of AC to DC is 5:6 for the Installation capacity which are

given in AC KW.

Solar Inverter: MPPT Range: MPPT Range: 80-1000 V , Max efficiency: 97.5% -

98.9%, O/p Frequency: 50/60Hz, Operating Altitude (m) ≤4000, O/p Power Factor:

~1, O/P THDi: <3%, Operating Tempreture Range: -25~60°C, Integrated

protection of Inverter are Anti-islanding Protection, Input Reverse Polarity

Protection, Insulation Resistor Detection, Ground fault protection, Residual Current

Monitoring Unit, Output Over Current Protection, Output Short Circuit Protection,

Output Over Voltage Protection, PV array string fault Protection. Protection

Degree: IP65, User Interface LCD & APP, Datalogger & Communication: GPRS /

Integrated, Input Reverse Polarity Protection Integrated, Insulation Resistor

Detection Integrated, Residual Current Monitoring Unit Integrated, Output Over

Current Protection Integrated, Output Short Circuit Protection Integrated, Output

Over Voltage Protection Integrated, Protection Degree: IP65, User Interface LCD &

APP,Datalogger & Communication: GPRS / Wi-Fi, Module Mounting Structure:

The mounting (Rectangular pipe / square pipe / circular pipe) with requisite cross

bars, nuts and bolts, etc. shall be Hot deep galvanized with minimum 80micron

coating. The Rectangular / square /circular hollow pipe section used for the

structure should have a minimum thickness of 2.0 mm. other than above, the

material thickness should be minimum 2.5 mm. A certificate of a structural

engineer certifying the strength and stability of the mounting structure to withstand

the weight and wind speed of 150 km/hour throughout the life span of 25 years of

the system, shall be submitted by the vendors. Hot Dipped Galvanized steel coils.

suitable arrangement for base plate for foundation , solar panel mounting, the

structure should be suitable for carry the load of solar panel,wiring, sprinkler

system etc. with necessary foundation work/wall mount, j bolt, anchor fastner etc.

the nut bolt used for installtion of stucture should be (SS 304) quality.The ground

clearance of the bottom most edge of solar panel shall not be less than 300 mm to

1200 mm or as per site’s technical/feasibility requirement.

a. Column –The minimum section (thickness) should be 60MM*40MM

b. Rafter - The minimum section (thickness) should be 60MM*40MM

c. Purlin - The minimum section (thickness) should be 40MM * 40MM Balane of

System with necessary Swichgears (Suitabel size and protection of ACDB &

DCDB), inter connecting wiring, earthing system as per the CEIG drawing

approval, lightining arrester system as per the CEIG drawing approval, all liasoning

work with various gov. dipartment like state nodal agency,DISCOM & CEIG is

included in agency scope

(C ) Grid Tied Solar Power System: 11 - 25 kW

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium

2 conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench /

pipe of following size of cables

3 1/2 core 70 Sq. mm ( 35 Sq. mm 1/2 core) meter 750 369

3 1/2 core 35 Sq. mm ( 16 Sq. mm 1/2 core) meter 800 215

Making trench in soft soil of suitable width of 90 cm deep for laying cable or locating the

fault all over the run and back filling the same and making the surface as normal ground.

Making trench in Hard Murrum / Tar Road of suitable width of 90 cm or required depth for

4 laying any size of cable or locating the fault all over the run and back filling the same and meter 300 62

making the surface as normal ground.

(B) If additional machinery like hammer driller or JCB use [Add] meter 800 295

Providing & laying approved make Double walled corrugated pipes (DWC) of

polyethylene(conforming to IS 14930 II )with necessary connecting accessories of same

material at required depth in existing trench for laying of cable. below ground / road

surface for enclosing cable (A)50 mm outer dia

50 mm outer dia meter 0 62

90 mm inner Dia. meter 750 95

120 mm inner Dia. meter 350 136

Supply of Approved make Iron Clad or metal clad four pole change over switch 415V.

confirming to IS of following capacity