PROVISION OF PCC HARD STANDING AT BACK SIDE ACC CELL AND PROVISION OF COMPOUND WALL OF CCDT AT NAVAL DOCKYARD VISAKHAPATNAM UNDER GE (I) DM VISAKHAPATNAM

Amount

Surface excavation not exe 30 cm deep and averaging 15cm deep (hard/dence soil) and getting out disposing off side MD land complete all as specified and directed.

M&L for hard core of broken stone or boulder of gauge not exc 63mm depositeed spread and leveled in layers not exc 15cm thick watered rammed to true surface complete all as specified and directed.

M&L for 100mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate as in sub bases, sub floor, floor complete all as specified and directed.

M&L for PCC M-30 grade with approved RMC Design mix concrete (Using 20 mm graded stone aggregate) as in flooring / hardstanding and in similar work complete all as specified and directed.

M&L for forming 12mm thick expansion joints for thickness of slab 150mm filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘B’ complete all as specified and directed.

M&L for forming construction joint 30mm deep x 10mm wide filled with sealing compound and sealed with sealing compound, Grade ‘B’ complete all as specified and directed.

Finishing surface of concrete roads, pavements, by brooming complete all as specified and directed.

Excavation in trenches not exceeding 1.5 M deep for foundation etc and getting out in soft / loose soil all as specified and directed.

Returning filling in including spreading levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil all as specified and directed.

Removing excavated material and depositing the material at a distance exc. 1.5Km but not exc 5 Km complete all as specified and directed.

M&L for reinforced cement concrete (nominal mix) Type B1 1:2:4 using 12.5mm sotne aggregates as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

Form work to rough finished surfaces of concrete (flat) sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc., all as specified and directed.

M&L for Reinforced cement concrete (nominal mix) Type B1 1:2:4 using 12.5mm sotne aggregates as Columns, pillars, piers, posts and struts complete all as specified and directed.

Form work for flat rough finish surface of concrete(square or rectangular or polygonal) for sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed.

M&L for reinforced cement concrete (nominal mix) type B1 1:2:4 using 12.5mm sotne aggregates as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

Form work for flat rough finish surface of concrete(square or rectangular or polygonal) forFormwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.

M&L for Mild Steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for cement concrete type D2, 1:4:8 (40 mm graded aggregate) as in foundation, filling and mass concrete all as specified and directed.

M&L for pre cast cement concrete type 1:3:6 type C-2 (20mm graded stone aggregate) block masonry with solid blocks exc 10 cm in width and setting in cement mortar 1:4 complete all as specified and directed.

M&L for rendering 15 mm thick in CM 1:4 on fair faces of brick work or concete surfaces finished even and smooth without using extra cement complete all as specified and directed.

Material & Labour for applying two coats of cement paint all as specified and directed.

Supply and fix mild steel flat iron fillets (for securing wire mesh etc) including bolting or riveting etc and similar work conforming to 290 Gde E-165 all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide/ zinc chrome complete all as specified and directed.

Supply and fix mild steel screw bolts of 5 to 10mm dia of shank (machine made ) with hexagonal or square heads at one end and scewed the other each screwed end to be fitted with washers and one hexagoal or square nut, eceedinng 10cm ad not exceeding 15cm long all as specified and directed.

S&F framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 (Brackets over 10 kg each to be measured under 'Structural Steel') complete all as specified and directed.

S&F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed.

SINGH BUILDERS (BID ID -3484848)

N V S S K N SIVA PRASAD (BID ID -3482802)

S R CONSTRUCTIONS (BID ID -3482078)

sai ganesh enterprises (BID ID -3483055)