Operation Maintenance OnM of New Emergency Block NEB and Super Speciality Block SSB Vardhman Mahavir Medical College VMMC Safdarjung Hospital New Delhi 110029

SL NO DESCRIPTION UNIT QTY REMARKS

CAMC including all material of Followings IP Based New CCTV

IP Dome Camera 180

IP Bullet Camera-22 Nos Per

IP PTZ Camera-4 Nos. Month

55 inch Monitor-6 nos.

Recording Server, Works Station, Switches etc. as installed at

CAMC including all material of Followings EPABX (Make-

8 trunk line, 6 Digital Card Per

600 analog extensionsin, Month

24 digital extention

and all It equipments etc.

CAMC including all material of Followings Fire Alarm & Public

Addressable System (Make- Siemens)

22 Loop Panel-1 Nos.

Smoke Detectors-2761 Nos.

Heat Detectors-328 Nos.

laser Base Smoke detector-8 Nos.

Monitor Module-30Nos.

PA Amplifier-6 Nos.

6 Zone Controller

Speaker-200Nos.

Talkback System

and all It equipments etc.

CAMC of including all material of Followings Nurse Call Bell

System(Make-C-System)

40Way Nurse Terminal Monitor-11No.

32Way Nurse Terminal Monitor-5Nos.

24Way Nurse Terminal Monitor-8Nos. Per

16Way Nurse Terminal Monitor-3Nos. Month

8Way Nurse Terminal Monitor-7Nos.

Call Bell Push- 1010 Nos.

Dome Lights- 50Nos.

all It equipments etc.

CAMC including all material of Followings BMS (Make-

AHU-121 Nos. (Make-Xylem)

Centrifugal fan-51 (make-Siwent)

Inline fan 234 (Zecoz)

Lifts-15 Nos. (Make-Johnson)

300KVA UPS-2 Nos. (Make-Eaton)

HT Panel-1 Nos (Make-L&T)

LT Panel- 1 Nos. (Make-Schneider)

With PC , DDC etc. & all It equipments etc.

Digitally signed by RAJ PAL

CAMC of E & ELV Equipments

RATE (Rs. Per AMOUNT (Rs. Per

SL NO DESCRIPTION UNIT QTY REMARKS

CAMC including all material of Followings Access Control

System (Make-Honeywell )

Biometric & Card Reader-10 Nos. Per

electromagnetic lock-10 Nos. Month

and all It equipments etc.

CAMC including all material of Followings

212 Nos. 315Wp Grid interactive Solar PV system, Inverter, Per

wiring etc (Make- Alpex Solar) & all It equipments etc. Month

One time repair and servicing including B-Check of all 4-Nos. Three Transformers & 3

H 1500KVA DG Set& 3X2500KVA Transformers, Panels , UPS etc. Job 1 16,44,300.00 16,44,300.00 DG set, Panels & UPS

(All consumables shall be paid Extra as per actuals) Servicing as per Norms

CAMC of all equipments, components with chemical and Per

spares of STP/ETP Plant & repainting etc (for 1 year) Month

CAMC of all equipments, components with chemical and Per

spares of WTP Plant & repainting etc (for 1 year) Month

CAMC of all equipments, chemical, components inclusive of Per

spares, repainting of RO Plants-600 LPH (for 1 YEAR)- 3Nos Month

Grand Total of CAMC 58,19,596.00

Grand Total of CAMC 58,19,596.00

Digitally signed by RAJ PAL

CAMC of E & ELV Equipments- NEB

RATE (Rs. Per AMOUNT

SL NO DESCRIPTION UNIT QTY REMARKS

Month) (Rs. Per Year)

CAMC including all material of Followings IP Based New CCTV System

IP Dome Camera 130

IP Bullet Camera-20 Nos

IP PTZ Camera-4 Nos.

55 inch Monitor-4 nos.

Recording Server, Works Station, Switches etc. as installed at site.

CAMC including all material of Followings EPABX (Make- Avaya )

8 trunk line, 6 Digital Card

B 140 analog extensionsin, Per Month 2 78,894.00 1,57,788.00

24 digital extention

and all It equipments etc.

CAMC including all material of Followings Fire Alarm & Public

Addressable System (Make- Bosch)

8Loop Panel-1 Nos.

Smoke Detectors-850 Nos.

Heat Detectors-300 Nos.

laser Base Smoke detector-6 Nos.

C Hooters- 36 Nos. Per Month 2 2,18,540.00 4,37,080.00

Monitor Module-10Nos.

PA Amplifier-6 Nos.

6 Zone Controller

Speaker-320Nos.

Talkback System

and all It equipments etc.

CAMC including all material of Followings Nurse Call Bell

System(Make-Omnicall)

40Way Nurse Terminal Monitor-2No.

32Way Nurse Terminal Monitor-4Nos.

D 16Way Nurse Terminal Monitor-4Nos. Per Month 2 1,43,699.00 2,87,398.00

8Way Nurse Terminal Monitor-1Nos.

Call Bell Push- 600 Nos.

Dome Lights- 50Nos.

all It equipments etc.

CAMC including all material of Followings BMS (Make- Simens)

AHU-56 Nos. (Make-Zeco)

CSU-3 Nos. (Make-Zeco)

Ventilation & Smoke Exhaust-180Nos.

E Lifts-8Nos. (Make-Johnson) Per Month 2 2,14,153.00 4,28,306.00

300KVA UPS-2 Nos. (Make-Eaton)

HT Panel-1 Nos (Make-Sudhir)

LT Panel- 1 Nos. (Make-SPC)

With PC , DDC etc. & all It equipments etc.

CAMC including all material of Followings Access Control System&

Boom Barrier (Make-XPR & Neptune)

Biometric & Card Reader-5 Nos.

F Boom barrier-2 Per Month 2 56,224.00 1,12,448.00

electromagnetic lock-5 Nos.

and all It equipments etc.

CAMC including all material of Followings

87 Nos. 315Wp Grid interactive Solar PV system, Inverter, wiring etc

(Make- Alpex Solar) & all It equipments etc.

Digitally signed by RAJ PAL

CAMC of E & ELV Equipments- NEB

RATE (Rs. Per AMOUNT

SL NO DESCRIPTION UNIT QTY REMARKS

Month) (Rs. Per Year)

Three Transformers

One time repair and servicing including B-Check of all DG Set including

& 3 DG set, Panels

H 'B' check & Transformers, Panels,UPS etc. (All consumables shall be Job 1 11,41,875.00 11,41,875.00

& UPS Servicing as

paid Extra as per actuals)

CMC of all equipments, components with chemical and spares of

STP/ETP Plant & repainting etc (for 1 year)

CMC of all equipments, components with chemical and spares of WTP

Plant & repainting etc (for 1 year)

CMC of all equipments, chemical, components inclusive of spares,

repainting of RO Plants-600 LPH (for 1 year)- 2nos

Grand Total of CAMC 40,45,035.00

Grand Total of CAMC 40,45,035.00

Digitally signed by RAJ PAL

CIVIL O&M WORKS

DSR Amount NDSR Amount

S.No DR/MR Item Description Units Qty Rate Remarks

1. Comprehensive maintenance services and upkeep of all

internal and external assets i/c under ground & over head

tanks (cleaning twice in one year in every six Months) at SIC

campus , complete with all materials labour, T&P , machines ,

trucks etc. as required on all days including Sunday and

holidays comprising of following operations as per the details

of SIC Buildings with external services as per enclosed GCC,

Special & other conditions, specifications etc. Complete and as

per direction of the engineer in charge.

2. Periodical cleaning & Maintenance of sewerage & drainage

network manually or using Pressure jetting machines twice in a

year or more, if required, i/c desilting of gully traps, manholes,

gratings, chocked sewer line, water closet including all the

vertical stacks of Sanitary and rain water pipes of all sizes i/c

khurrah twice in a year or more ,if required, to the entire

satisfaction of Engineer - in - Charge.

3. Maintenance and cleaning of chajjas, cornice basement,

roofs, expansion joints, waterproofing works etc., and

removing of cobwebs, beehives, vegetation including disposal

of silt , vegetation, malba (including existing malba) etc. to the

authorized dumping ground outside the campus at the location

approved by MCD/NDMC complete to the entire satisfaction of

Engineer - in - Charge.

4. Maintenance and operation of water supply grid and

valves in the entire campus to keep the water supply system

efficient and operational at all times including necessary

painting works to the entire satisfaction and as per direction of

the Engineer - in -Charge.

Digitally signed by RAJ PAL

5. Maintenance, repairing & cleaning of facade including

Glass cladding, Teracota cladding, Stone cladding including

joint filling, crack repairing and replacement of stone, Zen

Garden Structure Sculptures, damaged doors, windows,

ventilators of steel, aluminium, wood, PVC, False ceiling, trap

doors all type of glass with fittings and consumables, stagging

required including replacement of broken glass panes etc.

(excluding replacement of Facade glass/Porch Glass/Facade

Stone with its accessories) at all floors & heights i/c

repair/replacement of necessary fittings & fixtures of approved

make (or original make as per instruction of EIC) and quality,

wherever required to keep them in proper functional

conditions to the entire satisfaction of the Engineer - in -

6. Maintenance and repair of plumbing system of the entire

campus including stopping leakages or over flow of water from

PVC/RCC over head tanks ,cisterns and replacement of

damaged fittings i/c CP Brass fitting, ball cocks and G.I., PVC

fittings sensor device, hand drier, soap dispenser, Mirror etc. to

keep the entire water supply system efficient and functional to

the entire satisfaction of Engineer - in - charge . contractor shall

replace all fittings which have lost its aesthetic view, colour,

polish as per original installment with approved or original

make as per instruction of EIC.

7. Maintenance and repair of internal & external plaster,

repair and repaint of all area paints (external paint, textured

paint, structural steel paint) flooring ,pavements, pavor block

masonry & RCC works, pointing on roof tiles , patch plaster on

area upto 2.5 sqm and full plaster on area above 2.5 sqm,CC

gola i/c fixing of W.C. seat, gully trap, W.C trap, floor traps

and sealing of leakages from gully trap, W.C trap, floor trap,

drainage and vertical stacks, expansion joints etc. and

restoration of existing finishing in the affected areas to match

with adjacent finishes and to the entire satisfaction of

Engineer -in - charge.

8. Welding by electric plant/Machine including

transportation of electric welding plant at site to weld broken

grills, hinges, doors, windows, gates, railing and any other steel

work in building, parks, boundary walls, etc.complete as per

direction of Engineer -in -charge .

Digitally signed by RAJ PAL

9. Investigating causes of seepage / dampness/ leakage from

roof, wall, floors, pipes expansion joints of all kinds etc.,

dismantling existing affected portion, arranging required

materials, labours, T&P, lift/ ladder or jhulla(if required)

including taking all necessary measures, rectification complete

in all respect in time bound manner to the entire satisfaction

of Engineer - in - charge .

10. Closing holes in walls, ceilings, floors or any wherelse

including repairing with cement mortar to prevent entry of rats

& others animals.

11. Recording & maintenance of the complaints register

received at service centres in person or through telephone or

email or any other mode and assigning the complaint to the

workers of respective trade.

12. Preparing the abstract of attended / unattended

complaints on daily, weekly and Monthly basis and submitting

the same with reasons of unattended complaints and action

plan for redressal of pending complaint to the Engineer-in-

Charge of NBCC (I) Ltd. or his authorized representative.

13. Cleaning of RCC/PVC water storage Under ground & over

head tanks AND sumps twice in a year or more ,if required, by

adopting 6 stage process i.e. dewatering, sludge removal, high

pressure cleaning, vacuum cleaning, antibacterial spray and

ultra violet- radiation i/c mentioning the date of cleaning on

each tank. complete in all respect to the entire satisfaction of

the Engineer-in-charge.

14. Painting kerb stone, basement parking paint (repaint or

touch up) , outer area parking paint including restoration of

existing finishing in the affected areas to match with adjacent

finishes and to the entire satisfaction of Engineer-in-charge.

15. All inclusive comprehensive maintenance, repair of all

water incoming/outgoing lines as per terms and conditions and

as per direction of Engineer -in-charge.

16. The contractor shall be mixing bleaching and chlorine of

standard quality as per requirement in the drinking water

supply. The rate shall be inclusive of all the material and

operation, labour etc. involved.

17. Weekly preventive maintenance shall be essentially carried

out by deploying full team on Saturday and Sundays to check

each & every civil , electrical, fire fighting, fire alarm , pumps

items etc and maintained the record .

Digitally signed by RAJ PAL

18. Any other works in connection with the smooth operation

& maintenance work not mentioned above ,but required to be

carried out with in the cost and/ or also as per direction of the

Engineer -in - charge .

19. Boundary walls & maintenance of SS gates including all

glass doors, Fire Exit doors including providing necessary

hardwares and painting of Fire exit doors as per direction of

the Engineer -in - charge .

20. All kinds of blinds (manual or motorised) shall be repaired,

maintained as per direction of EIC

21. Cleaning & mopping of all HVAC plant room & equipment,

HT/Transformer/LT/DG plant room & equipment, Fire

fighting/Pump plant room & equipment, MLCP room &

equipment, stack parking & its equipment, lift & its equipment,

FHC & its equipment, etc.

22. Repairing & upkeep of furniture (

beds/chairs/tables/drawers/almirahs etc.) or as per direction of

A) Cost for Civil Maintenance for entire SSB& NEB Campus Months 2.00 28,10,116.00 56,20,232.00

Reimburshment on actual

S.NO Item Description Units Qty Rate DSR Amount (Rs) NDSR Amount (Rs)

Wall painting with ACRYLIC emulsion paint of approved and

manufacture to give an even shade

Painting with synthetic enamel paint of approved brand and

manufacture of required colour to give an even shade

13.99.1 One or more coats on old work. Sqm 5600.00 102.80 5,75,680.00

3 13.114 Melamine polishing on wood work (one or more coat). Sqm 25.00 1192.30 29,807.50

Providing and laying in position cement concrete of specified

4 4.1 grade excluding the cost of centering and shuttering - All work

up to plinth level :

1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural

4.1.4 sources : 4 graded stone aggregate 40 mm nominal size derived cum 10.00 7780.30 77,803.00

from natural sources)

Providing and laying cement concrete in retaining walls, return

walls, walls (any thickness) including attached pilasters,

5 4.2 columns, piers, abutments, pillars, posts, struts, buttresses,

string or lacing courses, parapets, coping, bed blocks, anchor

blocks, plain window sills, fillets, sunken floor etc., up to floor

five level, excluding the cost of centering, shuttering and

Digitally signed by RAJ PAL

1:1½:3 (1 cement : 1½ coarse sand (zone-III) : 3 graded stone

4.2.2 aggregate 20 mm nominal size) Cum 10.00 10375.55 1,03,755.50

Centering and shuttering including strutting, propping etc. and

6 4.3 removal of form for :

Foundations, footings, bases of columns, etc. for mass concrete

Steel work welded in built up sections/ framed work, including

7 10.25 cutting, hoisting, fixing in position and applying a priming coat

of approved steel primer using structural steel etc. as required.

Digitally signed by RAJ PAL

In gratings, frames, guard bar, ladder, railings, brackets, gates

and similar works.

Providing and fixing Ist quality ceramic glazed wall tiles

conforming to IS:15622 (thickness to be specified by the

manufacturer), of approved make, in all colours, shades except

burgundy, bottle green, black of any size as approved by

8 8.31 Engineer-in-Charge, in skirting, risers of steps and dados, over Sqm 40.00 1267.95 50,718.00

12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse

sand) and jointing with grey cement slurry @ 3.3kg per sqm,

including pointing in white cement mixed with pigment of

matching shade complete.

Providing and laying vitrified floor tiles in different sizes

(thickness to be specified by the manufacturer) with water

absorption less than 0.08%and conforming to IS : 15622, of

9 11.41 approved make, in all colours and shades, laid on 20mm thick

cement mortar 1:4 (1 cement : 4 coarse sand), including

grouting the joints with white cement and matching pigments

11.41.2 etc., complete

Providing and fixing false ceiling at all height including

providing and fixing of frame work made of special sections,

power pressed from M.S. sheets and galvanized with zinc

coating of 120 gms/sqm (both side inclusive) as per IS : 277 and

consisting of angle cleats of size 25 mm wide x 1.6 mm thick

with flanges of 27 mm and 37mm, at 1200 mm centre to

centre, one flange fixed to the ceiling with dash fastener 12.5

mm dia x 50mm long with

6mm dia bolts, other flange of cleat fixed to the angle hangers

of 25x10x0.50mm of required length with nuts & bolts of

required size and other end of angle hanger fixed with

intermediate G.I. channels 45x15x0.9 mm running at the

spacing of 1200 mm centre to centre, to which the ceiling

section 0.5 mm thick bottom wedge of 80 mm with tapered

flanges of 26 mm each having lips of 10.5 mm, at 450 mm

centre to centre, shall be fixed in a direction perpendicular to

G.I. intermediate channel with connecting clips made out of

2.64 mm dia x 230 mm long G.I. wire at every junction,

including fixing perimeter channels 0.5 mm thick 27 mm high

having flanges of 20 mm and 30 mm long, the perimeter of

ceiling fixed to wall/partition with the help of rawl plugs at 450

mm centre, with 25mm long dry wall screws @ 230 mm

interval, including fixing of gypsum board to ceiling section and

perimeter channel with the help of dry wall screws of size 3.5 x

Digitally signed by RAJ PAL

230 mm c/c, including jointing and finishing to a flush finish of

tapered and square edges of the board with recomme-nded

jointing compound , jointing tapes , finishing with jointing

compound in 3 layers covering upto 150 mm on both sides of

joint and two coats of primer suitable for board, all as per

manufacturer’s specification and also including the cost of

making openings for light fittings, grills, diffusers, cutouts made

with frame of perimeter channels suitably fixed, all complete as

per drawings, specification and direction of the Engineer in

Charge but excluding the cost of painting with

12.5 mm thick tapered edge gypsum plain board conforming to

IS: 2095- Part I

Wall lining butch work upto 10m height with Dholpur stone 40

mm thick rough facing on the exposed surface with stone strips

of minimum length 300 mm and required width, including

embedding every tenth layer and bottom most layer in

masonry or concrete after making necessary chases of size

11 8.17 75x75 mm and by providing layer of 75 mm thick strips i/c 12 Sqm 50.00 3135.00 156750.00

mm thick bed of cement mortar 1:3 (1 Cement : 3 coarse sand)

i/c ruled pointing in cement mortar 1:2 (1 white cement : 2

stone dust) with an admixture of pigment to match the shade

of stone complete as per direction of Engineer-in-charge.

Grouting the joints of flooring tiles having joints of 3 mm width,

using epoxy grout mix of 0.70 kg of organic coated filler of

desired shade (0.10 kg of hardener and 0.20 kg of resin per kg),

including filling / grouting and finishing complete as per

direction of Engineer-in-charge. Size of Tile 600X600 mm

Digitally signed by RAJ PAL

GRID CEILING :Providing and fixing mineral fibre false ceiling

tiles at all heights of size 595X595mm of approved texture,

design and pattern. The tiles should have Humidity Resistance

(RH) of 99%,Light Reflectance ≥ 85%, Thermal Conductivity k =

0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6

&7)in true horizont al level suspended on interlocking T-Grid of

hot dippedall round galvanized iron section of 0.33 mm thick

(galvanized @120 gsm) comprising of main T runners of 15x32

mm of length 3000 mm, cross T of size 15x32mm of length

1200 mm andsecondary intermediate cross T of size 15x32 mm

of length 600 mm to form grid module of size600x600 mm

suspended from ceiling using galvanized mild steel item

(galvanised@80gsm) 50mm long 8mm outer diameter M-6

dash fasteners, 6 mm diameter fully threaded hanger rod upto

1000 mm length andL-shape level adjuster of size 85x25x2 mm,

spaced at 1200 mm centreto centre along main ‘T’. The system

should rest on periphery walls /partitions with the helpof GI

perimeter wall angle of size24x24X3000 mm made of 0.40 mm

thick sheet, to be fixed tothe wall with help of plastic rawl plug

at 450 mm centre to centre & 40 mm long dry wall S.S.screws.

Providing andbottom portion ofupto

fixing partition all T-sections used in

ceiling height false of

G.I. frame and required board, including providing and fixing of

frame work made of special section power pressed/ roll form

G.I. sheet with zinc coating of 120 gms/sqm(both side

inclusive), consisting of floor and ceiling channel 50mm wide

having equal flanges of 32 mm and 0.50 mm thick, fixed to the

floor and ceiling at the spacing of 610 mm centre to centre

with dash fastener of 12.5 mm dia meter 50 mm length or

suitable anchor fastener or metal screws with nylon plugs and

the studs 48 mm wide having one flange of 34 mm and other

flange 36 mm and 0.50 mm thick fixed vertically within flanges

of floor and ceiling channel and placed at a spacing of 610 mm

centre to centre by 6 mm dia bolts and nuts, including fixing of

studs along both ends of partition fixed flush to wall with

suitable anchor fastener or metal screws with nylon plugs at

spacing of 450 mm centre to centre, and fixing of boards to

both side of frame work by 25 mm long dry wall screws on

studs, floor and ceiling channels at the spacing of 300 mm

centre to centre. The boards are to be fixed to the frame work

with joints staggered to avoid through cracks, M.S. fixing

channel of 99 mm

75mm overall width (0.9

thickness mm thick

partition withhaving twothick

12.5 mm flanges of

skin tapered edged plain Gypsum plaster board conforming

to IS: 2095: (part I): 2011 (Board with BIS certification marks)

Digitally signed by RAJ PAL

Providing and fixing thermal insulation with Resin bonded rock

wool conforming to IS: 8183, density 48 kg/m3 , 50 mm thick,

15 12.61 wrapped in 200 G virgin Polythene bags placed over existing Sqmt 50.00 316.05 15802.50

false ceilng and held in position by criss-crossing Gl wire

Providing & Fixing decorative high pressure laminated sheet of

plain / wood grain in gloss / matt/ suede finish with high

16 9.127.2 density protective surface layer and reverse side of adhesive

bonding quality conforming to IS : 2046 Type S, including cost

of adhesive of approved quality. 1.0 mm thick

METAL CEILING : Providing and fixing G.I Plain 84mm wide

x12mm deep panel with 16 mm flush profile to make it 100mm

module of length upto 6mtr, shall be roll formed out of 0.5mm

thick Powder Coated .The top coat of panel shall be 60 micron

polyester coated finish in approved colour. The panel shall be

17 MR factory cut in up to 6Mtr OR required length. Accessories Sqmt 500.00 5741.00 28,70,500.00

Detail:Carrier: 32 mm wide and 39mm deep, made out of

0.5mm thick steel backed with enameled black paint having cut

out to hold on panel in a module of 100mm closed. The joint of

two carriers shall be joined by means of carrier splices

maintaining a module of 100mm .4mm dia galvanized rod with

WATERPROOFING: Providing and laying water proofing

treatment to vertical and horizontal surfaces of depressed

portions of W.C., kitchen and the like consisting of:

(i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed

with water proofing compound conforming to IS 2645 in

recommended proportions including rounding off junction of

vertical and horizontal surface.

18 22.3 (ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 Sqmt 75.00 769.60 57720.00

coarse sand) mixed with water proofing compound in

recommended proportion including rounding off junction of

vertical and horizontal surface.

(iii) IIIrd course of applying blown or residual bitumen applied

hot at 1.7 kg. per sqm of area.

(iv) IVth course of 400 micron thick PVC sheet. (Overlaps at

joints of PVC sheet should be 100 mm wide and pasted to each

Demolition of brickwork manually/ by mechanical means

including stacking of serviceable material and disposal of

unserviceable material within 50 metres lead as per the

direction of the engineer in charge

Dismantling door, windows and clerestory widows (steel or

20 15.12.2 wood) shutter including chowkats, architrave, holdfasts etc Nos 20.00 367.20 7,344.00

complete and stacking within 50 metres lead

Digitally signed by RAJ PAL

Dismantling of aluminium/gypsum partitions, doors, windows,

fixed glazing, and false ceilings, including disposal of

unserviceable materials and stacking of serviceable materials

within a 50-metre lead, as directed by the Engineer-in-Charge.

Providing and fixing wash basin with C.I. brackets, 15 mm dia

CP Brass single hole basin mixer of approved quality and make,

including painting of fittings and brackets, cutting and making

good the walls wherever required:- (a) White Vitreous China

Wash basin size 550x400 mm with a 15 mm CP Brass single

hole basin mixer

Supply, Installation, Testing and Commisioning of suitable

23 MR compatible WASTE COUPLING 32MM- FULL THREAD- WITH EACH 20.00 2398 47,960.00

CERAMIC CAP-*130MM HEIGHT *65MM CERAMIC CAP

Providing and fixing CP Brass 32 mm size Bottle Trap of

24 17.22A approved quality & make and as per the direction of Engineer- EACH 20.00 1034.80 20,696.00

Providing and fixing mirror of superior glass (of approved

quality) and of required shape and size with plastic moulded

frame of approved make and shade with 6 mm thick hard

board backing : Rectangular shape 1500x450 mm

Providing and fixing white vitreous china extended wall

mounting water closet of size 780x370x690 mm of approved

shape including seat cover, and cistern fittings, nuts, bolts and

gasket etc complete.

Supply, Installation, Testing and Commisiong of PNEUMATIC

SINGLE PIECE SLIM CONCEALED CISTERN BODY WITH

INSTALLATION KIT & “S-TYPE” DRAIN PIPE CONNECTION SET

FOR WALL HUNG WC (WITHOUT FLUSH CONTROL PLATE)

Supply, Installation, Testing and Commissioning of PNEUMATIC

Digitally signed by RAJ PAL

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube

upto 1 metre long with S.S. triangular plate to Eureopean type

W.C. of quality and make as approved by Engineer - in - charge.

Providing and fixing brass stop cock of approved quality : 20

mm nominal bore

Supply, Installation, Testing and Commissioning of CONCEALED

31 MR STOP COCK WITH ADJUSTABLE WITH WALL FLANGE 15mm EACH 20.00 4965 99,300.00

Providing and fixing C.P. brass angle valve for basin mixer and

32 18.53.1 gyser points of approved quality conforming to IS : 8931 15 EACH 20.00 574.30 11,486.00

mm nominal bore

Cutting chases in brick masonry walls for following diameter

sand cast iron/centrifugally cast (spun) iron pipes and making

good the same with cement concrete 1:3:6 (1 cement: 3 coarse

sand: 6 graded stone aggregate 12.5 mm nominal size)

including necessary plaster and pointing in cement mortar 1:4

(1 cement : 4 coarse sand) :

Cutting holes upto 30x30cm in walls including making good the

34 18.76.1 same. With common burnt clay F.P.S. (non modular) bricks EACH 15.00 416.80 6,252.00

Making chases upto 7.5 X 7.5 cm in walls including making

35.00 18.78 good and finishing with matching surface after housing G.I. METRE 15.00 202.90 3,043.50

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)

pipes, having thermal stability for hot & cold water supply,

including all CPVC plain & brass threaded fittings, including

36.0 18.7 fixing the pipe with clamps at 1.00 m spacing. This includes

jointing of pipes & fittings with one step CPVC solvent cement

and testing of joints complete as per direction of Engineer in

Internal work - Exposed on wall

18.7.2 20mm nominal outer dia pipes METRE 25.00 335.00 8,375.00

18.7.3 25mm nominal outer dia pipes METRE 25.00 401.55 10,038.75

18.7.4 32mm nominal outer dia pipes METRE 25.00 518.75 12,968.75

18.7.5 40mm nominal outer dia pipes METRE 25.00 702.95 17,573.75

18.7.6 50mm nominal outer dia pipes METRE 25.00 934.15 23,353.75

Digitally signed by RAJ PAL

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)

pipes, having thermal stability for hot & cold water supply,

including all CPVC plain & brass threaded fittings, i/c fixing the

37.0 18.8 pipe with clamps at 1.00 m spacing. This includes jointing of

pipes & fittings with one step CPVC solvent cement and the

cost of cutting chases and making good the same including

testing of joints complete as per direction of Engineer in

Concealed work including cutting chases and making good the

18.8.1 15mm nominal outer dia pipes METRE 25.00 497.80 12,445.00

18.8.2 20mm nominal outer dia pipes METRE 25.00 537.60 13,440.00

18.8.3 25mm nominal outer dia pipes METRE 25.00 627.25 15,681.25

18.8.4 32mm nominal outer dia pipes METRE 25.00 739.30 18,482.50

Providing, fixing, jointing and testing in position of ISI marked

UV stabilized UPVC pipes for soil, waste, and vent, Type-B as

per IS : 13592 suitable for rubber ring joints, including all

neccessary specials and fittings (confirming to IS:14735) i.e.

bends, tees, junctions (with or without doors), reducers, WC

connectors, couplers, expansion joints / bellows, cowels,

clamps, rubber rings, clean outs etc. fixing at wall/ ceiling/ floor

level supported by clamp & hangers etc. in concealed / inside

duct / under floor & basement ceiling / external work etc.

including chase cutting as required, excavation and back filling

in all kind of soils, suspended from floor under false ceiling or

38 MR embedding the pipes laid under floors / building in 75 mm.

alround 1:2:4 cement concrete (1 cement : 2 coarse sand : 4

graded stone aggregate 20 mm nominal size) including cost of

shuttering for proper completion of the work, breaking and

making good the walls and floors etc. after pipes have been

The Pipes will be supported with threaded G I rods & U clamps

with nuts, washers etc on 50x50x5 mm slotted angle. The cost

will include all support arrangements. The work includes

commissioning of all pipes lines as per drawings and

specifications and as directed by engg-in-charge at site.

110 mm dia (Wall Thickness - 3.2 to 3.8 mm) METRE 25.00 536 13,400.00

75 mm dia (Wall Thickness - 3.2 to 3.8 mm) METRE 25.00 416 10,400.00

Providing, fixing, jointing and testing in position ISI marked

(IS:4985) UPVC pipes of min 6 Kg/ Sqcm rating with fitting for

waste pipe from fixtures to floor trap including reduces,

enlarger, socket, couplers, bends, tees etc including fixing at

wall/ ceiling level supported by clamp & hangers etc. cutting

holes in wall/ floors/ slabs and making good the same with

cement concrete 1:2:4 complete as required.

Digitally signed by RAJ PAL

Providing & fixing UPVC Floor trap of self cleansing design with

stainless steel grating complete in all respects.

Plain Floor Trap (4" Ht) with 50 / 75 outlet and with height

Extra for providing & fixing 125 mm dia C.P. grating in place of

C.I. grating over floor traps.

Providing & fixing of SS Floor Cleanout, round or square with

42 MR rubber seal and flat round cover with screws and other EACH 20.00 1001 20,020.00

required fitting complete as required.

Supply, Installation, testing and commisioning of toilet waste

water super quiet portable pumping station. Pump upto

vertical 5 meters and horizontal 100 meter from toilet to

vertical shaft with inlet connection in portable pump side inlet

of 50, 75, 110 as per requirement to complete the work as per

the directions of engineer in charge

Providing and fixing stainless steel tray below sewage pipe of

44 MR size 200x200x200 mm of grade SS304 including all accessories METRE 20.00 3629 72,580.00

Supply, Installation, Testing and Commisiong of SOAP DISH

Supply, Installation, Testing and Commisiong of ROBE HOOK

Supply, Installation, Testing and Commisiong of TOILET ROLL

HOLDER WITH COVER

Supply, Installation, Testing and Commisiong of TOWEL

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink

as per IS: 13983 with C.I. brackets and stainless steel plug 40

mm, including painting of fittings and brackets, cutting and

making good the walls wherever required :

Supply, Installation, Testing and Commisiong of single lever

sink mixer (table mounted) with extractable hand shower dual

flow complete with 1.2 m long tube with 450 mm long braided

Digitally signed by RAJ PAL

Providing and fixing white vitreous china battery based infrared

sensor operated urinal of approx. size 610 x 390 x 370 mm

having pre & post flushing with water (250 ml & 500 ml

51 17.80 consumption), having water inlet from back side, including EACH 20.00 7979.2 1,59,584.00

fixing to wall with suitable brackets, all as per manufacturer's

specification and direction of Engineer-in-Charge

Supply, testing, installation and commissioning of a fully

52 MR automatic Commercial RO WITH A CAPACITY of 600 LPH as per EACH 2.00 4,74,950.00 9,49,900.00

th directions of EIC

Providing and laying of 2mm conductive Vinyl rolls as specified

and indicated. The cost to include preparing surface to receive

vinyl flooring requirements like the floor to be absolutely

leveled, hard, dried, even and free from dirt, grease, moisture ,

and fixed using required adhesive ( water based adhesives like

Arobond 44 of Colourbond mktg/VC 31 of Pidilite Ind. ) and

correct laying technique. The make of vinyl flooring shall be of

Armstrong or equivalent of which the specs / samples have to

Flammability : B1 Class

Sound Absorption : 3 dB

Sheet width/length : 180/16-25 cm/m

Tile side length : 60.8/60.8 cm/cm

Total wt : 2.9 kg/m2

Colour fastness : 6 stage

Electrostatic loading limit : <2 Kv

Thermal resistance : 0.010 m2K/W Sqmt 150.00 2362.45 3,54,367.50

Providing and applying plaster of paris putty of 2 mm thickness

54 13.26 over plastered surface to prepare the surface even and smooth Sqmt 1259.00 262.70 3,30,739.30

Mirror polishing on marble work/Granite work/stone work

where ever required to give high gloss finish complete.

Total of (B) with DSR factor & Cost Index on DSR Items 96,26,929.49 68,16,832.50

B Total of DSR & NDSR (B) 1,64,43,761.99

Grand Total (A+B) 2,20,63,993.99

Grand Total (A+B) 2,20,63,993.99

Digitally signed by RAJ PAL

ELECTRICAL O&M WORKS

S. No DSR/MR Description of Items Unit Amount Remarks

All inclusive comprehensive maintenance, upkeep of all electrical internal & external

installations, Lights, Fans, Geysers etc. as per details below at SIC campus, New Delhi

for all days in a Months i/c holidays complete with materials , consumables etc as per

terms and conditions attached and as per direction of Engineer -in-Charge.

• Light points/ Fan pts/ Ex-fan pts./ Call bell pts.• 5 amp plug points• 15 amp power

plug points• 20/30 amp Ind. Power plug points• Telephone outlet, TV Outlet•

Telephone wire, TV Wire

• Fluorescent light/LED fittings• All type of light fittings as per Terms & Condition•

Ceiling fans• Ex-fans• Call bells• SP, SPN, TP & TPN MCB DB’s with MCB’s, Timers• Bus

Bars, Bus duct and Tap off box of different ratings• Cable trays of different size• 63 /

100 amps TP & N Switch units• 125 Amp. TP MCCB’s• All type of feeder pillars with

switch gears etc.

1 • All HT, LT, UG cables for streetlights.• And others as desired by Engineer-in-charge.•

All panels i/c UPS Panels and common area lights Street light, pump house, basement

parking, STP etc.• Lightning Arrestor System-+• Earthing system

• Urinal sensor with batteries

Any other works in connection with the smooth operation & maintenance work not

mentioned above ,but required to be carried out with in the cost and/ or also as per

direction of the Engineer-in-charge .

Weekly preventive maintenance shall be essentially carried out by deploying full team

on Saturday and Sundays to check each & every civil , electrical, fire fighting, fire alarm ,

pumps items etc and maintained the record.

All Electrical and Consumables Items (material) Bus duct/bars, cables & wires(for more

than 10 mtrs in each case), Led light Fittings , Porch Lights,MCB ( >=20 A), MCCB , Panels

, Urinal Batteries , are to be reimbursed on actual basis including Taxes .

A) Cost for Electrical Maintenance for entire SSB& NEB Campus Months 2.00 14,57,967.00 29,15,934.00

B) Material: Reimburshment on

S.NO DSR/MR Item Description Units Qty Rate AMOUNT (Rs.)

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC

insulated copper conductor single core cable in surface / recessed medium class PVC conduit,

1 1.10.3 with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS Nos. 59.00 1,704.00 1,00,536.00

PVC insulated copper conductor single core cable etc. as required.

Wiring for twin control light point with 1.5 sq.mm FRLS PVC

insulated copper conductor single core cable in surface /

2 1.11 recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and Nos. 59.00 1,803.00 1,06,377.00

earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as

Digitally signed by RAJ PAL

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC

insulated copper conductor single core cable in surface/

recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper

conductor single core cable for loop earthing as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC

4 1.14 insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as 0.00 -

Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor,

5 1.18 unarmored telephone -

cable in the existing surface/ recessed steel/ PVC conduit as required.

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated,

6 1.19 shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ Meter 126.00 54.00 6,804.00

recessed steel/ PVC conduit as required.

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in

7 1.21 surface/recess including -

cutting the wall and making good the same in case of recessed conduit as required.

Supplying and fixing following modular switch/ socket on the

8 1.24 existing modular plate & switch box including connections but -

excluding modular plate etc. as required.

1.24.4 3 pin 5/6 A socket outlet Each 125.00 136.00 17,000.00

1.24.6 Telephone socket outlet Each 100.00 168.00 16,800.00

1.24.7 TV socket outlet Each 42.00 168.00 7,056.00

Supplying and fixing two module stepped type electronic fan regulator on the existing modular

plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for

modular switches in recess etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in

11 1.31 recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular Each 42.00 545.00 22,890.00

switch, connections etc. as required.

Digitally signed by RAJ PAL

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in

12 1.32 recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A Each 42.00 659.00 27,678.00

modular switch, connections etc. as required.

Installation ,Testing, Commissioning of wall bracket /ceiling fittings of all sizes and shapes

13 1.35 containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including Each 9.00 151.00 1,359.00

connections etc. as required.

Supplying and fixing stiff pendent with 300 mm long, 20 mm dia X 1.6 mm thick steel conduit,

14 1.36 aluminium cast back plate and brass holder complete, including wiring the down rod with 1.5 sq. Each 10.00 353.00 3,530.00

mm FRLS PVC insulated, copper conductor, single core cable and painting etc. as required.

Supplying, drawing, Installation, Testing and commissioning of CAT6 AUTP LSZH 23AWG Twisted

Pair Cable in existing conduit/ on surface, Category 6 Unshielded Twisted Pair, 4 pair should be

complied as per UL/ETL verification program for compliance with ANSI/TIA-568.2-D standard.

Outer diameter should be in the range of 6.1mm nominal with Operating Temperature Range : -

5° to +60°C, Bending Radius : < 4 X Cable Diameter at –5°C ± 1°C and Pulling Force : 11.5Kg etc.

complete as required.

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB

distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus

bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But

without MCB/RCCB/Isolator)

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker

17 2.10 suitable for inductive load of following poles in the existing MCB DB complete with 0.00 -

connections, testing and commissioning etc. as required.

2.10.5 Three Phase & Neutral Each 18.00 1,301.00 23,418.00

Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual

18 2.14 current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB 0.00 -

complete with connections, testing and commissioning etc. as required.

Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual

19 2.15 current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB -

complete with connections, testing and commissioning etc. as required.

Digitally signed by RAJ PAL

Supply of SMD LED, IP 40, 9W Recessed downlighter with System efficacy of 120lm/W

and system lumen output 1080 lumen, operating in an ambient temperatire of 0⁰C to

45⁰C at 50Hz frequency. Luminaire shall have aluminium pressure die cast housing in

white with high transmittivity diffuser for uniform illumination and reduced glare.

EMC/PCT package of wattage of 0.5-1 W LEDs used in the product shall comply with IEC

62471 for Photo-biological safety. LM 80-08 compliant LEDs from reputed makes such

as Nichia/Cree/ Bridgelux/ Lumiled/ Osram/Seoul should be provided. The LED shall

20 MR comply with L70 life of 50000 burning hours tested at maximum current. The LEDs used

should be with CCT of 4000 K and CRI of Minimum 80, with MacAdam CCT binning <3

mounted on 1.6mm MCPCB/FR4 with 35 micron cu layer. LED Driver shall be external,

Isolated type, Constant Current topology driver with proper heat sink for heat

dissipation suitable to operate at nominal rated voltage of 240V with 4kV internal

surge protection, Power factor of minimum 0.95, driver efficacy of minimum 85%, and

total harmonic distortion (THD) of less than or equal to 10% should be integral to the

luminaire. Manufacturer shall have inhouse lab approved by NABL or ministry of science

Supply of 4 feet, ceiling or wall mounted, SMD LED batten of 20W LED luminaire with

System efficacy of 150 lm/W and 3000 system lumens, operating in ambient

temperature of 0⁰C to 45⁰C . Luminaire shall be made up of extruded anodised

aluminium housing with polycarbonate high transmissivity diffuser, ensuring uniform

illumination glare free lighting, excellent heat dissipation, high durability, scratch

resistance and non-rusting features. LEDs used in the product complies with IEC 62471

for Photo-biological safety. With screwless design, luminaire is with IP40 and IK02

protection with stainless steel mounting clamps. LM 80-08 compliant LEDs from reputed

makes such as Nichia/Cree/ Bridgelux/ Lumiled/ Osram/Seoul should be provided. The

LED shall comply with L70 life of 50000 burning hours tested at maximum current .The

LEDs used shall be with CCT of 5700 K and CRI of minimum 80, with MacAdam CCT

binning < 3. Luminaire shall have FR4 PCB and its LED Driver shall be of Integrated type

prewired in product housing, Isolated, Constant Current with range 150-270V AC with

internal surge protection of 4kV. Driver of Efficiency > 85%, Power factor of minimum

Digitally signed by RAJ PAL

Supply of integral, SMD 2x2 Backlit LED Panel, IP 20, 24W LED recess/Surface mounted

fixture with system efficacy of minimum 150lm/W and system lumen output of

minimum 3600lm, operating in ambient temperature of 0⁰C to 45⁰C at 50Hz frequency.

Luminaire shall have CRCA housing coated in white (RAL9016) with HET diffuser. LEDs

used in the product shall comply with IEC 62471. LM 80-08 compliant LEDs from

reputed makes such as Nichia/Cree/ Bridgelux/ Lumiled/ Osram/Seoul should be

provided. The LED shall comply with L70 life of 50000 burning hours tested at maximum

22 MR current. The LEDs used should be with CCT of 4000 K and CRI of Minimum 80. LED Each 65.00 4796.4 311766

Driver shall be Isolated type, Constant Current topology driver with proper heat sink for

heat dissipation suitable to operate in input voltage range of 150V to 270V (nominal

rated voltage – 240V) with 4KV internal surge protection, Power factor of minimum

0.95 and total harmonic distortion (THD) of less than or equal to 7% should be integral

to the luminaire. Manufacturer shall have inhouse lab approved by NABL or ministry of

science of govt of India. LM 79 and LM80 reports need to be submitted from a NABL/UL

accredited lab to verify above parameters. Compliance to Indian Standards of IS10322

B Day to Day Material Cost (B) 27,82,224.67 6,53,016.00

Grand Total (A+B) 63,51,174.67

Grand Total (A+B) 63,51,174.67

Digitally signed by RAJ PAL