Repair and Maintenance work of H.I.G. 10-136 Staff Quarter at Sector-10 Manjhola Yojna No.4 Ph 02 Moradabad.

Dismantling of exsting damaged plaster including disposal of refused within distance of 60.00 Mtr. (SOR-22, Ch-17 S.I. No. 706)

Scraping old white wash/colour wash including disposal of refusse with a distance of 60.00 Mtr. (SOR-22, Ch-17 S.I. No. 708)

M-150 birck work in 1:6 (one cement and six superstucture i/c necessary cutting one brick thick wall including supply of all materials, labour and T&P etc. required for proper completion of work.SOR-2022 MBDCLOUSE-303+309+310

12 mm thick plaster in 1:6cement coarse sand of 1.50 -1.75 F.M. mortar quality over brick work minm thickness not to be less than 1 cm. including supply of all materials, labour and T&P etc. required for the proper completion of the work .SOR-2022MBD.CLOUSE586+(584-584A)

15 mm thick plaster in 1:6cement coarse sand of 1.50 -1.75 F.M. mortar quality over brick work minm thickness not to be less than 1 cm. including supply of all materials, labour and T&P etc. required for the proper completion of the work .SOR-2022MBD.CLOUSE586+(584-584A)+596

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm.new item sor-2022 mbd-clouse-5

Supply and fixing 6 mm (1/4")thick china white glazed tiles in flooring or in skirting or dado laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry jointing and polishing complete including supply of all materials, labour and tool sand plants etc. required for proper completion of the work.sor-2022 mbd-clouse no-628

R.C.C. work with cement approved coarse sand and 20 mm guage approved stone grit in proportion of 1:1.5:3 in lintels of doors, windows and sunshades excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc. and supply of all materials, labour and tools and plants etc. required for proper completion of the work. Binding wire will be supplied by the contractor free of cost.

Mild steel or TMT Bars (Fe-500 D grade or higher) or HYSD Bars or iron in plain work such as reinforced concrete or reinforced brick work (when not included in anover all rates ) brought to required shape as necessary including bending for proper completion of the work and including supply of all steel.

Providing and applying white cement based wall putty on new surface with approved quality material of berger/J.K./birla or similar make two coats including cost of all materials labour tools and plants etc. required for proper completion of the work.

finishing wall with two coat of water profing cement paint weather coat of apporoved makes and quality

Distempering two coats with oil bound distemper of apporoved brand and makes

Painting or varnishing work in small areas or new wood work with one coat (upto one sqm of ready mixed priming paint and one coat of approved superior quality ready mixed paint or varnish including supply of all materials, labour tools and plants etc. required for proper completion of the work. Piant to be used ISI marked. (For two Coat)

Mild steel iron work for febrication of grill and stair case railing wrought to required form, including of supply of steel, nuts-bolts and wastage etc. and there fixing required for proper completion of work. Prosed new. (As per SOR-Ch-9- S.I. No. 502C)

Providing & Fixing 1mm thick M.S. sheet garrage door with frame of 40x40x6mm MS angle iron, 3.15 mm thick MS gusset plates at the junction and corners, supply and fixing necessary fittings. Lock rail of 37.5cm length. Using MS flat 40x6mm for diagonal bracing & central cross piece. Prposed new (As per SOR-Ch-9- S.I. No. 517B)

Painting or varnising work in small area on wood/steel surface two coat of approved superior quality synthetic enamel paint including cleaning the surface all durt & other foreign materials, labour and T&P etc required for proper completion of work. ( As per ch.No. 15 new item 3(3)+4(3)

Providing & Fixing 30mm thick second class teak wood wire guage shutters using galvanised M.S. wire guage of average width of aperture 1.4mm with wire of dia 0.63mm for doors, windows and clerestory windows, including ISI marked M.S. pressed but hinges bright finished of required size and necessary screws (As per ch. No. 09 SI.No.9.30.1)

Factory made 35 mm thick shutters with laminated veneer lumber styles rails as per TADS IS:1995 and panels of 12 mm thick one side prelaminated type-I, and other side balancing lamination, medium density flat pressed three layer, graded particle board (FPT-I) as per IS:3087-1985 bonded with BWP type synthetic resin adhesive, as per IS:848-1974.D.S.R-2025,CLOUSE NO-9.6.3

Providing and fixing factory made 30mm thick door shutter made of solid PVC foam profile. The styles & rails shall be of size 75 mm x 30 mm having wall thickness 5mm. The styles, top & bottom rails shall have on side wall thickness of 15mm integrally extruded on the hinge side of the profile for better screw holding power. The styles and rails shall be reinforced with M.S. tubes of size 33mm x17mmx1mm, painted with primer, all four corners of reinfocement to be welded or sealed. Solid PVC extruded bidding (push fit type) will be set inside the styles and the rails with a cavity, to receive single pieceextruded 5mm PVC sheet as panel. The styles and rails will be mitred cut and joint withthe help of PVC solvent cement & self driven self tapping screws. single piece extruded solid PVC lock rail os size 100mmx30mm with wall thickness 5mm & 15mm integrally extruded in the middle of the lock rail & fixed with styles with the help of PVC solvent cement & self driven self tapping screws of size 100mm x8mm complete as per manufacturer's spefification and direction of E/I (As per DSR-2021-Code 9.124.1)

Providing & Fixing of UV Resistant & washable PVC sheet for Grill/Gate covering/Balcony safety, including cutting, drilling wholes and wastage etc. and necessary nut-bolts, washers for proper fixing of sheet. UV Resistante & wahable PVC sheet colour choosen by E/I as per availabiltity. complete rate.

Cast cement concrete door sills chaukhats, boundary posts, shelves and similar small work with 1:2:4 cement, approved coarse sand of 2.20-3.60 FM and 20mm graded stone grit in bed block, hold fast etc complte including supply of all materials, and T&P etc required for proper completion of work.

Supply and laying of Chequered precast cement concrete tiles (dimension 250x250mm) 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20mm thick bed of cement mortar 1:4 (1 cement 4 coarse sand) including laying of bed concrete 8cm thick in proporation of 1:4:8 with cement, c sand and 40 mm guage stone ballast including cost of all materials, labour and T&P etc. required for the proper completion of the work. (As per DSR-2021-Code 11.20.4)

Providing & laying chamical/Polymer based water proofing intergral cement Plaster for treatment of roofs, balconies, terraces etc. consisting of following operations (A) Applying a slurry coat of neat cement using 2.75 kg/sqm of conforming to IS 2645 and approved by E/I over the existing surface of slab including adjoining walls upto 300mm height including cleaning the surface before treatment of 10mm thick cement plaster 1:4 (1 cement including laying glass fibre cloth & chicken wire mash of approved quality in top layer 10mm thick cement plaster 1:4 (1 cement 3 coarse sand and finally finishing the surface with neat cement slurry and making pattern of 300x300mm square 3mm deep (c) The whole terrace so finished shall be flooded with water for a miniumum period of two weeks for curing and for final test. All above operation to be done in order and as directed and specified by the E/I.

Providing and fixing stainless steel SS grade 304, curtain rod 25mm dia 1.20mm thick with two stainless steel SS grade 304, brackets (curtain rod) 25mm dia 1.20mm thick fixed with C.P. brass screws and PVC sleeves etc, wherever necessary complete Door/Window Curtain Rod

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.

Providing & fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc complete. (a) 300mm x 16mm.

Providing and fixing aluminium anodised towerbolts (barrel type) with necessary screws etc. complete. (a) 150 mm x 10mm

Providing and fixing aluminium anodised handles with screws etc. complete (a) 125 mm.

Fixing of steel or wooden chaukhats in position. Door chaukhats

Making grooves 10 to 12 mm widex 8mm deep in plaster of the wallor in ceiling vertically or horizontally as required.

Making drip course in sun shade or facia as per direction of Engineer incharge including supply of all materials,labour T & P etc for proper completion of the work. Excluding GST

Providing & laying cement concrete in 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggreagate 20mm nominal size) including supply of all materials,labour and T & P etc. required for completion of work and curing complete including cost of form work in foundation and floors

Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with :4.0 mm thick glass panes

M-150 birck work in 1:4 (one cement and six superstucture i/c necessary cutting one brick thick wall including supply of all materials, labour and T&P etc. required for proper completion of work.SOR-2022MBD-Clouse-

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI: 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but wit

Providing and fixing water closet squatting pan (white vitreous Indian type WC Pan) size 580x440mm with inegrated type foot rests with 100mm sand cast iron P pr strap, 10 litre low level white PVC flushing cistern with manually controlled device (Handle lever0 conforming to IS: 7231 with all fitting & fixture completed.sor-2022 mbd,clouse-17.1.1

Providing and fixing white vitreous china pedestal type water closet ( European type W.C. pan ) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:W.C. pan with ISI marked white solid plastic seat and lid(SOR MBD 2022 ITEM NO-17.3.1).

Providing & fixing flate back white vitreous china wash basin of size 550x440mm including 15mm dia C.P. brass piller tap, 32mm dia flaxible waste pipe with PVC waste fittings of standard pettern, etc. complete

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS : 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required. Kitchen sink with drain board of size 510x1040x200mm.

Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete. Flexible Pipe. 32 mm dia (for wash basin)

But for 40 mm dia (for sink and urinal)

Providing & fixing 15mm nominal dia C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 (SOR-Ch-22B-18.53.1)

Supply of 15mm nominal bore and 45cm length PVC connection pipe with P.T.M.T. nuts. 15mm Ø connection pipe 45cm long (DAR-21-7863)

Providing and fixing of chlorinated polyvinyle chloride(cpvc)pipes,having thermal stability for hot and cold water supply,including all CPVC brass threaded fittings,including fixing thew pipe with clamps at 1 m,spacing.this including jointing of pipes and fitting with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints compleate as per direction of engineer in charge.25mm nominal bore concleade in wall(Aligarh. sor-2022 item no-18.8.3)

Providing and fixing of chlorinated polyvinyle chloride(cpvc)pipes,having thermal stability for hot and cold water supply,including all CPVC brass threaded fittings,including fixing thew pipe with clamps at 1 m,spacing.this including jointing of pipes and fitting with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints compleate as per direction of engineer in charge.20mm nominal bore exposed on wall

Providing & fixing 15mm nominal bore C.P. brass bib cock of approved quality conforming to IS:8931 (SOR-Ch-22B-18.15.1)

Providing & fixing 15mm nominal bore C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.

Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.

Providing 15 mm dia. inlet C.P. brass Providing and Fixing C.P. Single flow overhead shower(Without Arm)-parryware T9901A1

Providing and fixing on wall face 110mm diameter unplasticised Rigid PVC rain water pipes working pressure 6kg/cm2 including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion . (i) Single socketed pipes.

making khurra

Providing and fixing 110mm dia unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.

Providing & fixing 15mm nominal bore C.P. brass Stop cock CONCEALED) of approved quality conforming to IS:8931 (SOR-Ch-22B-18.52.1)

Providing & fixing 25mm nominal bore cpvc Gate valve of approved quality (mr)

Providing & fixing 20mm nominal bore cpvc Gate valve of approved quality (mr)

Providing & fixing 600x450mm bevelled edge mirror of superior glass of approved quality complete with 6mm hard bord groung fixed to wooden cleats with C.P. brass screeews and washers complete. (SOR-22B-17.31)

Providing & fixing toilet paper holder : 17.34.1 C.P. brass complete. (SOR-22B-17.34.1)

Providing & fixing PTMT 450mm long towel rail complete with brackets fixed to wooden cleats with C.P. brass screews with concealed fittings arrangement fo approved quality and color. (DSR-13 Code No. 17.73.1)

Providing & fixing C.I. cover with frame of 300x300mm size (inside) the weight of cover to be not less than 4.50kg and frame to be not less than 2.70 kg including cast cement concrete 1:2:4 for proper fixing of C.I. cover frame including.

Providing & fixing C.I. Rectangular cover 455x610mm with frame (low duty) including cast cement concrete 1:2:4 for proper fixing of C.I. cover frame including supply of all material and labour T&P etc. for proper completion of the work.

Supply and fixing of UPVC SWR Pipe Type -B confirming to IS -13592 incluiding jointing the pipes with rubber ring lubricant and UPVC SWR Cuplar confirming to IS 14735 also inluiding excavation of treches cutting of walls and holes and repairing of walls , floors and refilling the trenches as before cut including cost of other fittings such as door band, T and YT including supply of all materials labour and t&p required for prper complition of the work. 110mm dia SWR Pipe.

Supply and fixing of UPVC S.W.R. nahni trap confirming to IS-14735 110mmx90mm size

Supply and fixing of UPVC S.W.R. plain bend confirming to IS-14735 110mm size

Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge.dsr-2025.clouse no-17.22(B)

Supplying and fixing 5/6 amp switch Modular type switch/socket on the existing switch box/cover including connection etc. as required

Supplying and fixing 3 pin 5/6 amp socket outlet Modular type switch/socket on the existing switch box/cover including connection etc. as required

Supplying and fixing 15/16 amp switch Modular type switch/socket on the existing switch boax/cover including connection etc. as required.

Supplying and fixing 5/6 amp bell push Modular type on the existing switch box/cover including connection etc. as required.

Supply, Installation, Testing and commissioning of 1200mm sweep BEE 5 star rated, ceiling fan wilth Brush less direct current (BLDC) motor, class of insulation : B, 3 nos. blades, 30cm long down rod 2 nos canopies, shackle kit, safety rope, copper winding, power factor not less than 0.9, service value (CM/M/W) minimum 6.00 Air delivery minimum 210 cum/min, 350 RPM (tolerance as per IS:374.2019) THD less than 10% remote or electronic requlator unit for speed control and all remaining accesories including safety pin, nut bolts, washers, temperature rise=75 degree C (max), insulatin resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC supply, earthing etc. complete as required

Supplying and fixing two Module stepped type fan ragulator on existing switch box including connection etc. as required.

Supplying and fixing polycarbonate batten/angle Holder on the existing junciton box/wooden block or PVC including connection etc. as required

Supplying and fixing call bell/buzzer suitable for single phase 230V etc complete as required.

Making hole in the wall for exhoust fan and finishing properly compete in all respect. (as per ele. SOR-18 S.I.No. 1121)

Erection and testing of exhaust fan on the existing hole with suitable size of rag bolts, nuts and washers etc. complete in all respect. ( as per ele. SOR-14, S.I. No. 1120)

Supply of ISI marked exhaust fan (Havells/Hindware or Similar ISI marked make)230/250 volt, 50Hz, AC supply with mounting frme/PVC frame and including other nut bolts etc. completed.

Supply & fixing of LED tube light batten fitting suitable for up to 1x22 watt LED tube light on surface complete in all respact. CAT-AA

Supply & fixing of 6-32 Amp. SPMCB (10KA) complete as per SOR-2014 S.I. No. 1003(A).

Supply & fixing of 0.5-5 Amp. SPMCB (10KA) complete as per Ele. SOR-18 S.I. No.1001.

Supply & fixing of water tight oblong 10 watt LED bulkhead luminaire with driver set confirming to IP 65 and above protection complete in all respect. CAT-AA (SOR-18 S.I. No. 1417)

Supply & fixing of water tight main gate boundary post lamp pair(02 nos same lamp) each lamp have 10 watt LED light complete in al respect.

Supply and fixing of surface/ flush mounting 8 way SPN distribution board with additional metal door without MCB complete in all respect, as directed at site by Engineer Incharge. CAT AA

Supply and fixing of 6 Amp to 32 Amp MCB(10KA)C Curve 6 - 32 amps.Cat. A

Supply and fixing of 40 Amp. 4 Pole MCB (10KA) CAT A

Add for Invertor Wiring in wiring Point for light/Fan/with 1.5 mm Cu Wire(Room only).