Infrastructure development under Bodhjngnagar Industrial Area

Amount

SCHEDULE - A

Detailed Survey of the proposed Street light by taking a suitable number of trial pits along with the route including submission of layout Drawing of Surveyed riute with respect to landmark and showing and highlighting all major parameter clearance with respect to parmanent installation of power line, gas line and other obstracles likely to be faced etc. ( for both overhead and under ground during execution as necessary)

Supply of 9.0Mtr long Steel PoleSupply of 9.0Mtr long Steel Pole

Supply of 11.0Mtr long Steel Pole

Supply of painted stay set complete direct in earth with 16 mm dia 1.8 mtr long painted stay rod anchor plate of size 300x300x8 mm thick, turn buckle of length 356 mm with 300mm long threaded adjustable 16 mm dia MS rod and thimble inc erection of 11 KV/LT guy insulator , galvanised stay stranded wire etc as per direction of Eng -in - charge.

Supply of Stay insulator (HT)

Supply of stranded GI wire (7/2.50mm)

Supply of MS Channel (75x40x40x6mm)

Supply of MS Angle (65x65x6mm)

Supply of 11 KV polymaric Disc insulator

Supply of 11 Disc fittings ( ball & socket type )

Supply of 11 KV polymaric Pin insulator.

Supply of triple pole ( 3 ph , 12 KV , 200 A manually Gang operated air Brek switch including necessary Connection

Supply of 11 KV SP metal oxide gapless surge type LA suitable for nominal system voltage of 11 KV in/c necessary Connection.

Supply of A.C.S.R DOG ( 100 sqmm) or equivalent AAS inc laying , hoisting, binding & jumpering with PG clamp etc as required as per TS

Supply of G.I Wire 8 SWG GI wire inc laying , hoisting, binding etc as required as per TS

Supply of Breaket Clamp Made by 50x6mm

Supply of Stay Clamps made by 50x6mm

Supply of Nuts and Bolts (Assorted size)

Supply of 95 sq mm Lug's(Bimetalic)

Supply of 120sq mm Lug's(Bimetalic)

Supply of 3 phase, 3 core, 185 sqmm,6.35/11KV, XLPE insulated aluminium power cable direct in earthi/c excavation of earth upto a trench depth of 1200mm & a width of 350mm in/c supply & protection by two layer 1st class brick soiling, 250 mm layer of sand soiling, coushioning , refeling & ramming or asper site requirement as per direction of Eng-in- charge.

Supply of 3 phase, 3 core, 120 sqmm,6.35/11KV, XLPE insulated aluminium power cable direct in earthi/c excavation of earth upto a trench depth of 1200mm & a width of 350mm in/c supply & protection by two layer 1st class brick soiling, 250 mm layer of sand soiling, coushioning , refeling & ramming or asper site requirement as per direction of Eng-in- charge.

Supply of 3 phase, 3 core, 95 sqmm,6.35/11KV, XLPE insulated aluminium power cable direct in earthi/c excavation of earth upto a trench depth of 1200mm & a width of 350mm in/c supply & protection by two layer 1st class brick soiling, 250 mm layer of sand soiling, coushioning , refeling & ramming or asper site requirement as per direction of Eng-in- charge.

Supply of 11 KV outdoor type jointing kit, 185 sqmm suitable for 3 core 11 KV XLPE insulator AL conductor

Supply of 11 KV indoor type jointing kit, 185 sqmm suitable for 3 core 11 KV XLPE insulator AL conductor

Supply of 11 KV outdoor type jointing kit, 120 sqmm suitable for 3 core 11 KV XLPE insulator AL conductor

Supply of 11 KV indoor type jointing kit, 120 sqmm suitable for 3 core 11 KV XLPE insulator AL conductor

Supply of 11 KV outdoor type jointing kit, 95 sqmm suitable for 3 core 11 KV XLPE insulator AL conductor

Supply of 11 KV indoor type jointing kit, 95 sqmm suitable for 3 core 11 KV XLPE insulator AL conductor

Supply of Straight Through Indoor Heat Shrinkable cable jointing kit with lugs for 11 KV Grade xlpe cable for 185 sqmm

Supply of Straight Through Indoor Heat Shrinkable cable jointing kit with lugs for 11 KV Grade xlpe cable for 120 sqmm

Supply of Straight Through Indoor Heat Shrinkable cable jointing kit with lugs for 11 KV Grade xlpe cable for 95 sqmm

Supply of 125 mm dia TATA/JINDAL/BANSAL make best quality GI pipe as per IS 1239 of dirent length by all terrain horizontal direction drilling /dagging manually across the road crossing without effecting the existing road.

Supply of 2.5 mtr long 40 mm dia GI pipe make TATA/JINDAL(ODC-153)

Supply of 60 KG Salt & 55 KG Charcoal ( for 1 pit)( ODC-154)

Supply of 8SWG GI wire for earthing

Supply of HT Kiosk/11 KV outdoor type feeder pillar made of 10SWG MS sheet complete with alluminium Bus-Bar, HT insulator etc. as rqd provided with locking system and painting, to be fitted on instructure by supplying of MS Angle(50x50x6mm) and MS Flat(40x6mm) as per technical specification, approved drawing and scope of work.

Supply of T-Shaped Pillar for cable line ID marking engraved with caption '11KV UG line (made of Pre-cast RCC) of size (pillar 3ft x0.33 ft x 0.33ft) and (T- section 1 ft. x0.33ft) by excavating of earth in/c rqd. Painting of the engraved caption in black over yellow background as per technical requirement , direction of the Engg-in Charge. The pillar should be embebbed in earth by 1.5 ft.

Erection of 9.0Mtr long Steel Pole direct in Earth in/c Excavation , Back filling & ramming etc as Required ( the poles should be Burried 1/6 th of it's length) as per Technical Specification.

Erection of 11.0Mtr long Steel Pole direct in Earth in/c Excavation , Back filling & ramming etc as Required ( the poles should be Burried 1/6 th of it's length) as per Technical Specification.

Erection of painted stay set complete direct in earth with 16 mm dia 1.8 mtr long painted stay rod anchor plate of size 300x300x8 mm thick, turn buckle of length 356 mm with 300mm long threaded adjustable 16 mm dia MS rod and thimble inc erection of 11 KV/LT guy insulator , galvanised stay stranded wire etc as per direction of Eng -in - charge.

Erection of fabricated 0.3 mtr. Long MS Ch (75X40X40X6)mm for SP top cross arm with clamps , N/B Complete as reqd on poles as per T.S

Erection of fabricated 1.2 mtr. Long MS Ch (75X40X40X6)mm for SP bottom cross arm with clamps , N/B Complete as reqd on poles as per T.S

Erection of fabricated 2.2 mtr. Long MS Ch (75X40X40X6)mm for D P cross arm with clamps , N/B Complete as reqd on poles as per T.S

Erection of fabricated 2.2 mtr. Long MS Ch (75X40X40X6mm) for GOS base support

Erection of fabricated 0.8 mtr. Long MS Ch (75X40X40X6mm) for GOS base support.

Erection of fabricated 1.5 mtr long S P pole guard bkt ( 65x65x6mm)

Erection of fabricated 2.5 mtr long double pole guard bkt ( 65x65x6mm)

Erection of fabricated 3.1Mtr long Bkt for Gantry (75X40X40X6mm)

Erection of 11 KV polymaric Disc insulator

Erection of 11 KV polymaric Pin insulator.

Erection & connection of triple pole ( 3 ph , 12 KV , 200 A manually Gang operated air Brek switch including necessary Connection

Erection of 11 KV SP metal oxide gapless surge type LA suitable for nominal system voltage of 11 KV in/c necessary Connection.

Stringing of A.C.S.R DOG ( 100 sqmm) or equivalent AAS inc laying , hoisting, binding & jumpering with PG clamp etc as required as per TS

Stringing of G.I Wire 8 SWG GI wire inc laying , hoisting, binding etc as required as per TS

Laying & comissioning of 3 phase, 3 core, 185 sqmm,6.35/11KV, XLPE insulated aluminium power cable direct in earthi/c excavation of earth upto a trench depth of 1200mm & a width of 350mm in/c supply & protection by two layer 1st class brick soiling, 250 mm layer of sand soiling, coushioning , refeling & ramming or asper site requirement as per direction of Eng-in- charge.

Laying & comissioning of 3 phase, 3 core, 120 sqmm,6.35/11KV, XLPE insulated aluminium power cable direct in earthi/c excavation of earth upto a trench depth of 1200mm & a width of 350mm in/c supply & protection by two layer 1st class brick soiling, 250 mm layer of sand soiling, coushioning , refeling & ramming or asper site requirement as per direction of Eng-in- charge.

Laying & comissioning of 3 phase, 3 core, 95 sqmm,6.35/11KV, XLPE insulated aluminium power cable direct in earthi/c excavation of earth upto a trench depth of 1200mm & a width of 350mm in/c supply & protection by two layer 1st class brick soiling, 250 mm layer of sand soiling, coushioning , refeling & ramming or asper site requirement as per direction of Eng-in- charge.

Erection of 11 KV outdoor type jointing kit, 185 sqmm suitable for 3 core 11 KV XLPE insulator AL conductor

Erection of 11 KV indoor type jointing kit, 185 sqmm suitable for 3 core 11 KV XLPE insulator AL conductor

Erection of 11 KV outdoor type jointing kit, 120 sqmm suitable for 3 core 11 KV XLPE insulator AL conductor

Erection of 11 KV indoor type jointing kit, 120 sqmm suitable for 3 core 11 KV XLPE insulator AL conductor

Erection of 11 KV outdoor type jointing kit, 95 sqmm suitable for 3 core 11 KV XLPE insulator AL conductor

Erection of 11 KV indoor type jointing kit, 95 sqmm suitable for 3 core 11 KV XLPE insulator AL conductor

Erection of Straight Through Indoor Heat Shrinkable cable jointing kit with lugs for 11 KV Grade xlpe cable for 185 sqmm

Erection of Straight Through Indoor Heat Shrinkable cable jointing kit with lugs for 11 KV Grade xlpe cable for 120 sqmm

Erection of Straight Through Indoor Heat Shrinkable cable jointing kit with lugs for 11 KV Grade xlpe cable for 95 sqmm

Laying of 125 mm dia TATA/JINDAL/BANSAL make best quality GI pipe as per IS 1239 of dirent length by all terrain horizontal direction drilling /dagging manually across the road crossing without effecting the existing road.

Comissioning of Earthing set as per ISS 3043 of 1966 and weith upto date amendment having 2.5 mtr long gi ( isi Marked ) of 40 mm dia with holes including a pair of clamp of 50x6 mm flat & 12 mm dia galvanized nuts & bolts long with alternate layer of salt & charcoal including supply of 8 SWG GI wire inc 5 mtr long polythene pipe.( ODC-125)

Laying of 8SWG GI wire at 300mm below the ground level for earthing of Sub-Station equipments from the earth electrode.

Erection of HT Kiosk/11 KV outdoor type feeder pillar made of 10SWG MS sheet complete with alluminium Bus-Bar, HT insulator etc. as rqd provided with locking system and painting, to be fitted on instructure by supplying of MS Angle(50x50x6mm) and MS Flat(40x6mm) as per technical specification, approved drawing and scope of work.

Erection of T-Shaped Pillar for cable line ID marking engraved with caption '11KV UG line (made of Pre-cast RCC) of size (pillar 3ft x0.33 ft x 0.33ft) and (T- section 1 ft. x0.33ft) by excavating of earth in/c rqd. Painting of the engraved caption in black over yellow background as per technical requirement , direction of the Engg-in Charge. The pillar should be embebbed in earth by 1.5 ft.