Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.2 LAccepted-Finance RAJGARH DIVISION HP PWD RAJGARH | KULLU | HIMACHAL PRADESH | 172001 | ₹8.2 L | L1 | Accepted-Finance Qualifying in financial evaluation |
| 2 | L2₹10.1 L+₹1.9 L (22.6%)Rejected-Finance | ₹10.1 L+₹1.9 L (22.6%) | L2 | Rejected-Finance Disqualifying in financial evaluation |
| 3 | L3₹12.2 L+₹3.9 L (47.9%)Rejected-Finance | ₹12.2 L+₹3.9 L (47.9%) | L3 | Rejected-Finance Disqualifying in financial evaluation |
| 4 | Rejected-Technical | - | - | Rejected-Technical Not fulfill the qulifying criteria |
Tender Value
Refer Docs
EMD Value
₹22,000
Closing Date
19 Nov 2020, 5:00 pmClosed
Secretary NP RAJGARH
NAGAR PANCHAYAT RAJGARH
C/O Public Toilet near Old Bus stand in ward no.2 at Rajgarh,Distt.Sirmour (Including WS and SI)
2020_UDDHP_42392_9
No.NP.RAJGARH-864-871 DATED 13-10-20
Open Tender
Civil Works
Item Rate
30 days
NP RAJGARH
Please refer Tender documents.
11 documents required · 11 mandatory
₹500
Secretary NP Rajgarh
₹22,000
18 Dec 2020
12 Nov 2020
20 Nov 2020
12 Nov 2020
19 Nov 2020
12 Nov 2020
Amount
Excavation in foundations, trenches etc. in earth work in all kinds of soils such as pick work, jumper work, blasting work and chiselling / wedging out of hard or soft rock where blasing is prohibited up to all depths stacking the excavated soil not more than 3 meteres clear from the edge of excavation and then returning the stacked soil in 15 cms layers, when required into plinths, sides of foundations etc. consolidating each deposited layer by ramming and watering and then disposing off all surplus excavated earth as directed by the Engineer-in- charge.
Providing and laying cement concrete 1 : 6 : 12 (1 cement : 6 sand :12 graded stone aggregate 40 mm nominal size) and curing complete excluding cost of form work in foundation and plinth including carriage of material in all leads & lifts.
Providing form work with steel plates 3.15mm thick welded with angle iron frames 30x30x5mm so as to give a fair finish including centering, shuttering, strutting and propping, etc. with wooden battens and ballies heights of propping and centering below supporting floor to ceiling in all heights and removal of the same for in-situ reinforced concrete and plain concrete work including carriage of material in all leads and lifts.
Foundation, footing bases of columns etc. and mass concrete.
Beams, cantilevers, girders and lintels sides and soffits of beams, small ends of beams,beam haunching, cantilivers, girders, bressumers and lintels not exceeding 1 metre in depth.
Columns, pillars, posts and struts square, rectanagular or polygonal in plan.
Flat surfaces such as soffits of suspended floors, roofs including inclined surfaces up to any degree, landings and the like: (i) Floors, etc. upto 200 mm in thickness.
Edges of slabs and breaks in floors and walls under 20cm wide.
Providing and laying cement concrete 1:1.5:3 (1cement :1.5 sand :3 graded stone aggregate 0mm. nominal size) and curing omplete excluding cost of form work and reinforcement. including carriage of material in all leads and lifts.- for feinforced concrete work in:
Foundation, footing bases of columns etc. and mass concrete.
Suspended floor, roofs, landings, shelves and their support, balconies, beams, girders, bressumers and cantilevers in all heights.
Columns, pillars, posts and struts square, rectanagular or polygonal in plan.
Providing Tor steel /TMT Steel reinforcement for R.C.C. work including bending, binding and placing in position complete including cost of binding wire upto all heights including carriage of material in all leads and lifts.
Half brick masonry using 2nd class common burnt clay building bricks in superstructure above plinth level upto all heights in cement mortar 1:4 (1 cement: 4 sand) including carriage of material in all leads and lifts.
Random rubble masonry/polygonal rubble masonry (uncoursed/brought to courses) with hard stones of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (1 cement :6 sand : 12 graded stone aggregate 20mm nominal size) at plinth level in Cement Mortar 1:6
15 mm cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering upto all heights including arises, Internal rounded angles, chamfers and / or rounded angles not exceeding 80 mm in girth and finished even and smooth in cement mortar 1:4 ( 1 cement : 4 sand) including carriage of material in all leads and lifts.
6mm cement plaster to ceiling in cement mortar 1:3 (1cement :3sand) including carriage of material in all leads & lifts.
Stone soling properly hand packed filling interstices with kharanja stone and consolidationg with power road roller to the required gradient andcamber i/c spreading., watering and rolling of binding materuial moorum or earth etc complete as per HPPWD Specification. 100 mm spread thickness finished work i/c material and labour). including carriage of material in all leads & lifts.
Providing and fixing 10mm thick anti skid water proof stain and impect resistent heavy duty vetrified tiles Nitco or equivalent 600x600mmx10mm manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm thick cement mortar 1:3 (1 cement : 3 sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete including carriage of material in all leads .and lifts.
Providing & fixing glazed tiles 6mm thick of any size and any colour as per sample approved by the Engineer-in-Charge i/c cost for cutting the tiles where required in skirting, risers of steps and dado upto all height on 12mm thick cement mortar 1:3 (1cement:3 sand) & jointed with cement slurry i/c carriage of material in all leads and lifts.
Providing wood work in frames of doors,windows,clerestory,windows and other frames wrought,framed and fixed in position. including carriage of material in all leads and lifts. Sal wood
Providing and fixing panelled glazed or panelled a nd glazed shutters for doors windows and clerestory windows. Including black enamelled iron butt hinges with necessary screwsi/c carriage of material in all leads and lifts.
Providing 40x3 mm flat iron hold fast 40cm. Long including fixing to frame with 10mm diameter bolts & nuts and wooden plugs and embeding in cement concrete block 30x10x15cm. 1:3:6 ( 1 cement : 3 sand: 6 graded stone aggregate 20mm nominal size) i/c carriage of material in all leads and lifts.
Providing and fixing aluminium sliding door bolt as per colour and shade approved by the Engineer-in-Charge with bolts and nuts screws etc. complete including carriage of material in all leads & lifts.
Providing and fixing aluminium handles as per colour and shade approved by the Engineer-in-Charge with necessary screws including carriage of material in all leads & lifts.
Providing and fixing aluminium tower bolt (barrel type) as per colour and shade approved by the Engineer-in-Charge with screws etc. complete including carriage of material in all leads & lifts.
Distempering (two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surfaces/ ceiling or sloping surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth including carriage of material in all leads & lifts. (a) Priming coat with distemper primer.
On Ceiling.
Applying one coat of acrylic primer ( Pectrum or equivalent or Superior quality) on new concrete/masonry plasterd surfaces after and including preparing the surface by throughly brushing the surface free from mortar droppings and other foreign matters, sand papering thesurface amooth complete.including carriage of material in all leads & lifts
Finishing wall with weather proofexterior grade emulsion of approved design (Apexultima)or its eqalied on undecorated wall surfaces ( two coat) to give an even shade and final finish after throughly cleaning the surface to remove all dirt,dust and other forign matter etc. including sand paper smooth completeincluding carriage of material in all leads & lifts in wall/ceiling surface.
Applying priming coat over new wood and wood based surfaces after and including preparing the surface by throughly cleaning oil,grease,dirt,dust and other foreign matter sand papering and knotting including carriage of material in all leads & lifts. Ready mixed paint brushing wood primer pink.
Paintings two coats (excluding priming coat) coat over new wood and wood based surfaces with ready mixed paint brushing to give an even shade cleaning oil,grease,dirt,dust and other foreign matter sand papering and stoppings . including carriage of material in all leads & lifts. . with white paint
Providing and fixing high pressure PVC Spigot and socket waste and ventilating pipes ISI Marked complete including fixing with approved adhesive etc. complete including carriage of material in all leads & lifts.
110 mm nominal size.
75 mm nominal size.
Providing and fixing PVC single eqaual branch with oval access door, insertion rubber washer 3mm thick, bolts and nuts ISI Marked complete including fixing with approved adhesive etc. complete including carriage of material in all leads & lifts.
110 mm nominal size.
75 mm nominal size.
Providing and fixing PVC door bend with oval access door, insertion rubber washer 3mm thick, bolts and nuts ISI Marked complete including fixing with approved adhesive etc. complete including carriage of material in all leads & lifts.
110mm nominal size.
75 mm nominal size.
Providing and fixing PVC collar ISI marked including fixing with approved adhesive etc. complete including carriage of material in all leads & lifts.
110mm nominal size.
75 mm nominal size.
Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc. complete including carriage of material in all leads & lifts.
110mm nominal size.
75 mm nominal size.
Providing and fixing vitreous China wash down, water closet (European type. W.C. pan) with integral 'P' or 'S' trap including jointing the trap with soil pipe in cement mortar 1:1(1cement : 1 sand) (Seat and over to be measured and paid for separately) including carriage of material in all leads and lifts.
Angle indian universal closet.
Providing and fixing automatic flushing cistern with a pair of C.I. or M.S. brackets complete with brackets conplete fittings including C.I. syphonic appartus, mosquito C.I. Syphoneic appartus, mosquito proof proofutomatic, flushing cistern with a pair of PVC/C.I. or M.S. brackets complete with fittings including PVC syphone apparatus, mosquito proof lid, PVC union and coupling for connections with inlet, outlet and over flow pipes including cutting holes amd making good the same ( over flow pipe to be measured and paid for separately)including carriage of material inall leads & lifts. 5.00 litres capacity
Providing and fixing vitreous China squatting plate pattern urinal of size 450x350 mm with integral longitidinal flush pipe i/c carriage of material in all leads and lifts.
Providing and fixing C.P Brass bib tap including carriage of material in all leads & lifts.(a) 15mm dia. i/c carriage of material in all leads and lifts.
Providing and fixing C.P Brass pillar tap including carriage of material in all leads & lifts.(a) 15mm dia.
Providing and fixing PVC connection pipe with brass unions i/c carriage of material in all leads and lifts. 15 mm dia
Providing and fixing PVC water storage tank of ISI : 12701 marked, G.I. inlet and outlet connection, 15mm nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting up to all heights above ground level :-including carriage of material in all leads & lifts.(i) 1000 litres net capacity tank
Providing and fixing to wall ceiling and floor galvanised mild steel tubes (Medium grade) tube fitting and clamps including making good the wall including carriage of material in all leads & lifts. 15 mm nominal bore
Providing and laying in trenches galvanised mild steel tubes (Medium grade) tube fitting ( Earth work in terenches to be measured and paind for seperately) i/c carriage of material in all leads and lifts.
Making connection of galvanised steel distribution branch with galvanised mild steel main 20mm to 40 mm nominal bore by providing and fixing tee including cutting and threading the pipes complete including carriage of material in all leads and lifts: (JINDAL/ TATA MAKE).
Providing and fixing ferrule including boring and taping the main 15 mm nopminal bore including carriage of material in all leads and lifts.
Providing and fixing stoneware gully trap grade-A with CI grating, brick masonry chamber in cement mortar 1:6 and water tight CI cover with frame of 300mmX300mm size ( inside) the weight of cover to be not less than 4.53 kg. & frame not to be less than 2.72 kg. including carriage of material in all leads and lifts.
Constructing manhole with R.C.C. top slab in 1:2:4 mix in (1 cement:2 sand :4 graded stone agg. 20 mm nominal size) foundation conc. 1:4 :8 (1 cement :4 sand:8 graded stone 40 mm nominal size) inside plastering 15 mm thick with cement mortar 1:3 (1 cement:3 sand) finished with a floating coat of neat cement & making channel in conc.1:2 :4 mix ( 1cement:2 sand:4 graded stone of 20 mm nominal size) finished smooth comp. including curing complete.including carriage of material in all leads and lifts.
Inside size 800mm x800x500mm deep including C.I cover with frame (light duty single seal pattern-I) 455mmx610mm internal dimension total weight of cover & frame to be not less than 38 kg. (weight of cover 23 kg. & weight. Of frame 15 kg. ) ---- with 200mm thick walls of brick masonry using common burnt bricks in cement mortar 1:3 (1 cement:3 sand)
Providing & fixing vitreous china wsh basing with sngle hole for pillar tap with CI or MS bracket painted white including citting holes and making good the same but excluding fittings . including carriage of material in all leads and lifts. Flat back (i) 550mmX400mm
Providing and fixing CP brass waste pipe for wash basing including carriage of material in all leads and lifts.32 mm dia.
Providing and fixing CP brass grating for floor trap 100 mm dia including carriage of material in all leads and lifts.
Providing and fixing 600mm x 450 mm bevelled edge mirror of superior glass mounted on 6mm thick A.C. Sheet or ply wood sheet and fixed with C.P.Brass screws and washers including carriage of material in all leads & lifts.
Providing and fixing towel rail complete with C.P. Brass brackets fixed to wooden plugs with C.P. brass screws. Including carriage of material in all leads and lifts. 600mmx20 mm
Providing and fixing chromium plated brass soap dish with C.P Brass brackets fixed to wooden cleats with C.P brass screws.
Providing and fixing CP brass angle valve 15 mm dia without nuts and pipes. Including carriage of material in all leads and lifts.
Providing and fixing CP brass angle valve 15 mm dia without nuts and pipes. Including carriage of material in all leads and lifts.
Providing and fixing chromium plated brass full,way valve with wheel including carriage of material in all leads and lifts-15 mm nominal bore.
Abhinanadan
vineet kshetri
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .