LIS Thrangali

Amount

OD16042/2022-2023:Providing and laying GI Pipes 150 mm dia 4.2mm thickness including material and conveyance as per the direction of departmental officers at site

OD16045/2022-2023:MS Flanges for 150mm pipe - Manufacturing supplying and fitting 150mm dia MS Flange having shell thickness 10mm with 75mm depth suitable bolt, holes, fixing the flange in position with required welding around the flange, pipe joint grinding for smoothing the welded portion, including painting with red oxide primer etc. complete as directed by departments officers.

OD16046/2022-2023:Manufacturing supplying and fitting 150mm dia M.S bend of various lengths with shell thickness 6mm including painting with 2 coats of red oxide primer, laying the same to line and level as directed by departmental officers at the site.

2.32:Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared.

2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil

15.56:Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

4.3.1:Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns

4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

10.13.1:Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee- sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 ( 1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

10.5.1:Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using M.S. angels 40x40x6 mm for diagonal braces

13.52.1:Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work

OD23843/2022-2023:Supplying bearings for proper working of pump and motor

OD23854/2022-2023:Supplying 16mm PVC cable single core unsheathed for connection from Starter to motor with all necessary fasteners

OD25538/2022-2023:Providing and fixing C.I footvalves 150 mm diameter complete with bolts, nuts, rubber insertions, etc as per direction of Engineer in charge

OD26104/2022-2023: Providing and fixing Name board of size 75 x 45 cm using 1 mm thick MS sheet and 25 x 25 x 5 mm angle section and fixing in GI pipe of 40mm dia of 240 cm (210 cm above GI and 30 cm below G L) overall height (25 x 25 x 5 mm angle section ) post including fixing in 20 x 20 x 30 cm concrete below ground level.

M.V.SAKKEER HUSSAIN

Bidder Name

M.V.SAKKEER HUSSAIN

UNNI K