REPAIR AND MAINTENANCE OF CHARPOY GI AND REPLACEMENT OF PLYWOOD TOP INCLUDING POLISHING, PAINTING AND RE-CANNING OF CERTAIN FURNITURE AT GE IMA DEHRADUN

Amount

Replacement /reuse of following broken unserviceable parts of charpoy GI Pipe with ply top including tightening of loose components shape and size as per drawing and as directed by Engr in Charge Drg No FD-220.

12 mm thick commercial ply wood of size 2100x900mm grade BWR type BB(No of ply 7) including half round 1st class teak wood beading on all around the plytop complete all as specified and directed. Make - Green Ply/Century/Action tesa/Kitply

Removing of old broken long rail from the frame of charpoy GI Pipe and Supply and fixing of new long rail of charpoy GI pipe 32 mm dia medium grade all as per drawing and as directed by Engr-in-Charge Make- Tata/Jindal/Prakash

Labour only for dismantiling of short rails and replacement of old broken short rails converted from long rails retrieved from charpoy GI Pipe including cutting and threading complete all as directed by Engr-in-Charge Note: Retrieved long rails shall be reused for making short rails obatained from dismantiling

Labour only for dismantiling of legs of charpoy GI pipe and replacement of old broken legs converted from old short rail retrieved from charpoy GI Pipe including cutting and threading complete all as directed by Engr-in-Charge Note: Retrieved short rails shall be reused for making legs obatained from dismantiling

Removing of old broken/ unserviceable three way elbow 32 mm dia med grade of charpoy GI pipe and supply and fixing of new 3way GI elbow 32 mm dia all as specified and as directed by Engr-in-Charge. Make- Tata/Jindal/Prakash.

Removing of old broken/ unserviceable check nut and supply and fixing of new check nut suitable to GI Pipe 32 mm dia med grade thickness 6mm as shown on drg complete all as specified and as directed by Engr-in-Charge

S &F in repair 2 No new flat iron 900mm x 50mm x 05mm in each charpoy GI pipe with nut, bolt and washer in equal distance for supporting of plywood and preparation of new surfaces of steel over 10cm width and girth and applying two coat of synthetic enamel paint over a coat of redoxide primer complete all as specified and directed.

Dismanteling of broken / unserviceable glass and rubber beading and replacement with new glass and rubber beading of size 760x250x3mm thick of Almirah large steel glazed made to shape and size as per drg and as directed by Engr-in-Charge / (Drg No FD 104(M)

Repair /replacement of old broken top with new top of the table steel 3' x 1.5' examination made of MDF board 18/19 mm thick covered with 1mm thick black sunmica including beading 4 mm thick first class hard wood (teak) all round and welding to back/ broken joints as required including painting with two coat of OG synthetic paint complete table and S &F hard rubber shoes in the legs of table shape and size as per drg and all directed by Engr-in-Charge/Drg No (GE/PN/F-4) Make - Green Ply / centary/Kitply/Kitlam/Action Tesa

Replacement of old torn unserviceable coir foam mattress cover glazed cotton cloth cover of not less than Rs 300/- per meter, size 1905x914x102mm including long side TKK chain fixed properly on the mattress as specified and as approved by GE shape and size as per TP and directed by Engr in Charge

Replacement of old unserviceable pillow cover of size 600x400mm with cover glazed cotton of best quality white cotton cloth cover of not less than Rs.250 per meter shape and size as pe TP and directed by Engr in Charge.

Polishing with french polish to undermentioned items of furniture article with high gloss finishing after rubbing old polish. The surface to be rubbed down to smoothness with sand paper and after dusting the parts in wood shall be filled with filler solution for smoothness and as directed by Engineer-in-Charge Make- Asian wood/Shalimar/Berger/Rajdoot

Table writing cadet (Drg No FD-67)

Table dining of sorts (Drg No TP)

Table dining 5'x3' (Drg No TP)

Table dining 8 Pers (Drg No FD-30, 239, 273)

Table dining 6 Pers (Drg No FD-30, 239, 278)

Table dining Special (Drg No Spl)

Table 900x600x760mm with drawer (Drg No FD-41, 224, 284)

Table Laundary (Drg No FD-91)

Table office clerk 'W' (Drg No FD-83)

Table office officer 'W' (Drg No FD-84)

Table science large (Drg No TP)

Table writing small (Drg No Spl)

Terstle store Room wooden (Drg No FD-86)

Table centre two tier (Drg No FD-375)

Table centre (Drg No FD-274)

Table dining 3'x3' (Drg No FD-88(M))

Table writing FD/Med (Drg No FD-275)

Teapoy (Drg No FD-278)

Table Bed Side (Drg No FD-28,248,SK-572)

Table writing clerk (Drg No SK-571)

Table Ex 3'x2' (Drg No GE/PN/F-4)

Table dressing Gents with mirror (Drg No DB-3980,FD-230)

Table 900x600 with out drawer (Drg No FD-42, 231, 223)

Table dressing ladies with mirror (Drg No FD-251, 278)

TV Trolley Map (Drg No FD/E6/Map-4)

Table Bed side Map (Drg No FD/E6/Map-15R)

Table dining to seat 18 persons (9 on either side ) three pieces (Drg No BZ/FD/01)

Table dining to seat 28 Persons (14 on either side) four pieces. Drg No B2/FD/01

Table dining to seat 32 Persons (16 on either side) five pieces. Drg No B2/FD/01

Table dining to seat 50 Persons (25 on either side) seven pieces. Drg No B2/FD/01

Table dining to seat 36 Persons (18 on either side) five pieces. Drg No B2/FD/01

Table dining to seat 56 Persons (28 on either side) eitht pieces. Drg No B2/FD/01

Table dining to seat 80 Persons (40 on either side) in eleven pieces. Drg No B2/FD/01

Table dressing ladies with stool (Drg No FD/Map-II/07)

Spray Painting two coats of synthetic enamel olive green on old painted surface to undermentioned items of steel furniture with high class finishing including necessary denting painting /welding and smootness surfaces all as directed Make-Asian/Berger/Nerolack/Sahlimar

Chair Verandhah (Drg No FD-359, 256)

Chair writing steel (Drg No FD-360)

Chair CB steel special with hand rest (Drg No FD-120 (M))

Ladder for loft (Drg No FD-232, 238)

Chair varandah Map (Drg No FD/E6/Map -II)

Bed Hard with Ply top Map (Drg No FD/E6/Map -8R)

Charpoy folding steel (Drg No FD-388 R)

Charpoy with hard top (Drg No FD/Map-II/01)

Chair writing steel (Drg No FD/E6/Map-12)

Desk (Drg No FD-1021)

Desk stand lecture steel (Drg No FD-1022)

Form without back (Drg No FD-77,1027)

Locker bed side cadet steel (Drg No FD-257)

Locker steel (Drg No FD-1029)

Locker six door steel (Drg No TP)

Locker two door steel (Drg No TP)

Metal shelving Rack adjustable type small (Drg No FD-69 (M)

Metal shelving rack adjustable type large (Drg No FD-69 (M)

MNF Clamp for cot, Bed, Charpoy GI Pipe , (Drg No SK FD-220, 246, 247)

Rack shoe steel (Drg No FD/E6/Map-06 R)

Rack side steel with four tray (Drg No FD-1023)

Rack adjustable six tiers (Drg No FD-1038)

Rack towel steel (Drg No FD-81)

Stool steel size 305x305x510mm (Drg No FD-88)

Steel Cup board (Drg No TP)

Table steel 3'x1.5' Ex (Drg No GE/PN/F-4)

Table office clerk steel (Drg No FD-1004)

Table office officer steel (Drg No FD-1003)

Table Tubular steel allwyn (Drg No FD-119)

Table steel General Tubular (Drg No TP)

Table tubler steel with SM Top (Drg No FD-90 (M))

Trestle store room Iron (Drg No FD-1043)

Table steel with drawer size 900x600x760mm (Drg No FD-1008)

Table steel with drawer size 900x600x760mm (Drg No FD-1007)

Waste paper basket steel (Drg No GE/PN/F-16)

Re-canning of chairs wooden/steel all type of stool, dressing, Bin soiled line etc with 4.00mm thick 1/2 round white plastic cane as per sample in Godrej pattern complete all as specified and directed by Engr-in-Charge Shape and size as per (Drg No. FD 202, 203, 279, 225, 357, DB-3972,FD-75(M) Make- Shah plastic/Premier plastic

Re-canning of broken/unserviceable chair verandah with 4mm thick 1/2 round each superior quality of cane after and including welding of broken portion if required. Clean surface by rubbing with sand paper and painting with two coats of shite synthetic enamel paint where required. hard rubber shoes shall be provided on each legs of chair complete all as specifed or as directed by the Engr-in-Charge Shape and size as per (Drg No FD-256) Make- Shah plastic/Premier plastic

Removing of old broken legs and replacement of 'C' type leg of chair verandah with 19mm dia MS pipe made out of 1mm thick MS sheet duly welded with and including two coat of synthetic enamel paint over a coat of redoxid primer. Shape and size as per (Drg No FD-256)

Tuck welding to broken legs and frames of chair verandah (Drg No FD-256)

Replacement of following old broken /unserviceable parts with new part of chair steel tubuler with arms/ without arms shape and size as per drawing No FD-75(M)

Replacement of old unserviceable seat of chair tubuler steel with arm made of 1st class hard wood (Teak) well seasoned best quality duly canned in Godrej pattern with and including preparation of new wooden surface and applying two or more coat of french polish black shade

Replacement old unserviceable back of chair tubular steel with arm made of 1st class hard wood (Teak) well seasoned best quality duly canned in godrej pattern with and including preparation of new wooden surface and applying two or more coat of french polish black shade

Replace seat of chair tubuler steel without arm made of 1st class hard wood (Teak) well seasoned best quality duly canned in Godrej pattern with and including preparation of new wooden surface and applying two or more coat of french polish black shade

Replacement old unserviceable back of chair tubular steel without arm made of 1st class hard wood (Teak) well seasoned best quality duly canned in godrej pattern with and including preparation of new wooden surface and applying two or more coat of french polish black shade

Handle of 1st class hard teak wood made to shape as per drg, 425mm long 50mm wide and 25mm thick and shall be polished with and including two or more coat of french polish of black shade and fixed properly complete all as specified and directed

NAVEEN TRADERS

M.R. ENTERPRISES