REFILLING OF EARTHWORK, BLAST PENS WITH CONNECTING WORK AND CERTAIN B/R WORKS IN WSA TECH AREA AT AF STN AMBALA UNDER GE (AF) AMBALA

Amount

M & L for Forming embankments including raising earth raising from base, spreading in layers not exceeding 30cm thick, watering, ramming / rolling and finishing to required size, shape, etc. complete all as specified and as directed for the following levels Note: The approved earth/soil to be brought from out side of the MOD land.

Height not exceeding 1.5m, complete all as specified and as directed.

Height exceeding 1.5m but not exceeding 4.5m, complete all as specified and as directed.

Height exceeding 4.5m but not exceeding 6m, complete all as specified and as directed.

M&L for cleaning out of all vegetation grouth by means of cutting/removing from SWT walls and making good the disturbed surfaces where ever required incl material and labour complete all as specified and directed.

M&L for cleaning out of all the walls and floors of SWTs from the algae, vegetation including draining out of water and the like by suitable means and making good the disturbed surfaces where ever required incl material and labour complete all as specified and directed.

M&L for water proofing treatment to SWT Walls/Concrete floor as under :- (a) Making staging/scaffolding as per site requirement. ( b) Removing of loose concrete and existing plaster from the surface of SWTs. ( c) Chipping the entire surface to make roughen to receive the gunite. (d) fixing the additional reinforcement bars where the steel bars are rusted if reqd.. (f) Sand blasting the surface to remove the rust from the existing reinforcement if required. (g) Fixing of PVC nipple for grouting at honeycombed surface as per site condition if required. (h) Fixing of 3" x3"x10G welded wire mesh to the entire surface. (j) Applying of 50mm thick average guniting with CM 1:3.5 (1 cement : 3.5 course) sand with mixing of water proofing epoxy compound. (k) Grouting the nipples with non shrinkage compound. (l) Curing the gunited surface for 7 days and removing all the scaffolding etc complete.

Demolition of cement concrete (unreinforced) in ground floor and pavings not exceeding 15 cm thick below or above ground level complete all as specified and directed.

M & L for 100 mm thick PCC 1 :4 :8 type D-2 ( using 40mm graded mechanically crushed stone aggregates ) as in sub base of floors complete all as specfied and directed.

M&L for 100 mm thick cement concrete type B-2 (1:2:4) (using 40 mm graded mechanically crushed stone aggregate) complete all as specified and as direced

Material and labour for 75 mm thick cement concrete type C-2, 1:3:6 ( (using 20 mm graded mechanically crushed stone aggregate) as in plinth protection/path laid in bays incl finishing the concrete surface even and smooth without using extra cement complete all as specified.

M&L for PCC (1 : 2 : 4) type B-0 (using 12.5mm graded mechanically crushed stone aggregte) as in roof kerbs, mud stop, benching, coping padding and the like complete all as specified and directed.

M&L for prepolished 60 mm thick rubber moulded double glossy coloured designer interlocking tiles made of M-35 design mix concrete, laying over 50 mm thick sand cushioning, with the crushing strength not less than 250 Kg/Sqcm of approved design and shape, complete all as specified and directed

M&L for complete removal of existing treatment from RCC/Stone/Concrete/brick walls/Asbestos cement sheet or plastered surface and applying two coat of exterior acrylic emulsion paint in camouflaging pattern of any shape and size over a coat of primer complete all as specified and as directed by Engineer-in-Charge. Note :- Sample of camouflaging pattern to be approved by GE as per user requirement

M&L for applying one coat of white wash on plastered or unplastered old decorated surface on wall at any height in Bldgs/Blast Pens incl preparation of surfaces and filling all holes with putty etc complete all as specified and as directed by Engineer-in-Charge

All as per BOQ srl Item No 15.00 here-in-above but as on ceiling at any height in Bldgs/Blast pen complete all as specified and as directed

M&L for preparation of old or previously treated surfaces of RCC/Stone/Concrete/brick walls/Asbestos cement sheet or plastered surface and applying one coat of exterior acrylic emulsion paint in camouflaging pattern of any shape and size complete all as specified and as directed by Engineer-in-Charge. Note :- Sample of camouflaging pattern to be approved by GE as per user requirement

S&F in repair stainless steel wire cloth 0.36mm minimal dia of wire and average width of aperture 1.4mm fixed with stainless steel staples to windows complete all as specified and directed. .

S&F 3mm thick sheet glass ordinary quality of glazing with oil putty or wooden beads in square not exceeding 0.5 sqm each panes complete including hacking out old broken glass (any thickness) size , quality or description from wooden/steel frames etc complete all as specified and directed.

M/S SHASTRI BUILDERS AND ENGINEERS

M/s Kang Builders

JS CONSTRUCTION COMPANY

Puneet Sharma

peeyush construction and engineering co