REPAIR TO FLOOR, WALL, PAINTING, PLINTH PROTECTION AREA, PERIODICAL SERVICES AND CERTAIN MISC REPAIRS IN CERTAIN BLDGS AT GANDHINAGAR

Amount

Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for 15mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified and directed.

M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:4 to receive tiles etc on vertical surfaces of walls complete all as specified and directed.

M&L for Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 SQM, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match premium quality as in floor etc complete all as specified and directed.

All as per item No 4.00 here in before but on vertical surfaces/skirting.

M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 SQM but not exceeding 0.11 SQM, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for Glazed ceramic coloured tiles in vertical surfaces 350x250x7mm/450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 SQM but not exceeding 0.18 SQM, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for Granite 18 to 20 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Dismantling Plain or corrugated steel/ Fibre translucent sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed.

S&F 2mm thick fibre glass reinforced translucent corrugated/plain sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc complete all as specified and directed.

S&F pre-coated galvalume aluminium zink coating GI based corrugated steel sheet 0.50mm thick of colour having tensile strength of 550Mpa as in roof covering fixed with self tapping screw complete all as specified and directed.

Demolition of brickwork or stone/ boulder masonry, built in cement mortar complete all as specified and directed.

Brick work with fly ash brick, old size bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed

Taking down cement or cement lime plaster any description incl racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. Note :- Repairs in patch work.

M&L for rendering 10mm thick plaster in CM 1:6 on fair faces of brick work or concrete surfaces of walls finished even & smooth with out using extra cement complete all as specified and directed.

M&L for rendering 15mm thick plaster in CM 1:4 on fair faces of brick work or concrete surfaces of walls finished even & smooth with out using extra cement complete all as specified and directed.

M&L for 10mm thick cement plaster in CM 1:3 as in ceiling finished even and smooth without using extra cement over 10mm thick setting coat using bonding agent complete all as specified and directed.

M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed.

M&L for preparation of new wood surfaces of any description, not otherwise descri-bed, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M & L preparing new surface of wall and applying two coat of oil emulsion distemper over a coat of chalk whiting complete all as specified and directed.

M & L preparing new surface of ceiling and applying two coat of oil emulsion distemper over a coat of chalk whiting complete all as specified and directed.

M & L preparing new surface of wall and applying two coat of cement base paint over a coat of chalk whiting complete all as specified and directed.

M & L preparing new surface of wall and applying two coat of acrylic weather coat paint over a coat of primer complete all as specified and directed.

M&L for preparation of old surfaces of ceiling and applying one coat of white wash complete all as specified and directed.

M&L for preparation of old surfaces of wall and applying one coat of white wash complete all as specified and directed.

M&L for preparing of old surfaces of ceiling and applying one coat of distemper oil emulsion complete all as specified and directed.

M&L for preparing of old surfaces of walls and applying one coat of distemper oil emulsion complete all as specified and directed.

M&L for preparing of old surfaces of walls and applying two coat of distemper oil emulsion complete all as specified and directed.

M&L for preparing of old surfaces of walls and applying one coat of cement based paint complete all as specified and directed.

M&L for preparing of old surfaces of walls and applying two coat of cement based paint complete all as specified and directed.

M&L for preparing of old surfaces of wall and applying one coat of acrylic weather coat paint complete all as specified and directed.

M&L for preparing of old surfaces of wall and applying two coat of acrylic weather coat paint complete all as specified and directed.

M&L for preparation of old wood surfaces of any description, not otherwise descri-bed, over 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old painted steel and iron surfaces of any description over 10cm width or girth not otherwise described and applying one coats of synthetic enamel paint complete all as specified and directed.

Taking down Shutters of any description exc 1 sqm but not exc 2 sqm each complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from frames) size exc 1.5 Sqm & n.exc 4.00 Sqm each complete all as specified and directed.

M&L 30mm thick flush door shutter, solid core construction with block board core and ply wood face panels, commercial type on both faces complete all as specified and directed.

M&L for glazed and skeleton shutters 30 mm thick 1st class hard wood open rebated and prepared to receive glass divided into squares rebated sash bars any numbers, edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass, sizes of memebres as specified in SSR Part-I section 8 clause 8.24 (a) supply and fixed to chowkat, complete all as specified and directed.

S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC Sheet rainforced with MS square tube complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F in repair aluminum alloy, anodized, sliding door bolt of length 250mm with hasp & staple (bolt type) & fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy complete all as specified and directed.

S&F in repair 150mm size aluminum handles, cast type anodised complete all as specified and directed.

S&F in repair aluminum anodized barrel tower bolt of extruded section, length of bolt 150mm complete all as specified and directed.

S&F 100mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.

S&F in repairs Double action floor spring hydraulically regulated made up of minimun 1.25 mm thick aluminium alloy sheet foundatin box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

M&L for maintinance of floor door spring for aluminium door by greasing, oiling and replacement of screws etc complete all as specified and directed.

Repair to aluminium door, windows and ventilator incl taking down, refixing in same opening after changing glass pan/aluminium sections as required. (Note : aluminium sections/glass pane shall be measured and paid seperately under respective items)

S&F powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F in repair door closer aluminium (die cast) body hydraulically regulated designation No 3 universal type suitable for door shutter of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed.

S & F in repair brass mortice lock vertical type 6 lever of size 100 mm to 120 mm long with handle including taking down old mortice lock complete all as specified and directed.

S & F in repair floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor 140mm length complete all as specified and directed.

Hacking out old broken glass (any thickness ,size,quality or description) from wooden frames or stone,iron frame,concrete or brick surrounds,glazed with putty or fixed with beads complete all as specified and directed.

S&F for 4 mm thick sheet glass oridinary quality and glazing with oil putty in square not exc 0.5 sq.m in each pane complete all as specified and directed.

S&F Frosted glass ordinary quality 4mm thick, glazing with oil putty in square n exc 0.5 Sqm in each pane complete all as specified and directed.

S&F in repair aluminium powder coated (Three track) sliding windows with frame of size 92x31.75x1.50mm and shutters of size 42 x 18x 1.50 mm with rubber gasket, beading and locking arrangement including making good to the disturbed portion complete and stainless steel wire mesh 0.36 mm nominal dia of wire with 1.40 mm average width of aperture and fixed with stainless steel wire staples and fixing 5 mm thick glass with necessary rubber beading, gasket etc complete all as specified and as directed by Engr-in-charge . Note - Glazing/ wire mesh shall be included in the unit rate.

S&F in repair aluminium powder coated grill 6 mm thick fixed to walls with and including 'H' of 'F' aluminium channel of size 38 mm x 12 mm x 1.50 mm complete all as specified and directed.

S&F in repair aluminum powder coated door shutter, aluminium section weighing not less then 0.55 Kg/m incl necessary jointing cleats, glazing clips rubber neoprene packing incl (a) 150mm handle - 02 Nos. (b) Stainless steel hinges - 100mm - 03 Nos (c) Mortice lock in built 3 lever-01 Nos in each shutter, alum anodized snap beading screw etc complete all as specified and as directed. Note:- Glass & particle board shall be paid measured and separately.

S&F in repair 12mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work fixed to aluminum framing complete all as specified and directed.

Cleaning and removing all scale and dirt,etc.n. exc 250 litres tanks and from mouth of circulating pipes,.etc including disconnecting existing tanks,setting aside (or lowering if required) for cleaning etc.and reconnecting and refixing in position. Note :- Bleeching powder to be spread in the bottom of tank before fixing / installing in position.

Cleaning and removing all scale and dirt,etc.exc 250 ltrs & n. exc 500 litres tanks and from mouth of circulating pipes,.etc including disconnecting existing tanks,setting aside (or lowering if required) for cleaning etc.and reconnecting and refixing in position. Note :- Bleeching powder to be spread in the bottom of tank before fixing / installing in position.

Cleaning and removing all scale and dirt,etc.exc 500 ltrs & n. exc 1000 litres tanks and from mouth of circulating pipes,.etc including disconnecting existing tanks,setting aside (or lowering if required) for cleaning etc.and reconnecting and refixing in position. Note :- Bleeching powder to be spread in the bottom of tank before fixing / installing in position.

Dismantling water tanks n.exc 250 Litres capacity.

Dismantling water tanks exc 250 but n.exc 500 Litres capacity.

Dismantling water tanks exc 500 but n.exc 1000 Litres capacity.

S&F rotational moulded water storage tank 250 Ltr capacity double layer (cylindrical/vertical with closed top) hoisted and fixed in position complete all as specified and directed.

S&F rotational moulded water storage tank 500 Ltr capacity double layer (cylindrical/vertical with closed top) hoisted and fixed in position complete all as specified and directed.

S&F rotational moulded water storage tank 1000 Ltr capacity double layer (cylindrical/vertical with closed top) hoisted and fixed in position complete all as specified and directed.

S&F in repairs 20 mm ball brass valves,high pressure,with polythene float and flynut complete,screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

S&F in repairs 25 mm ball brass valves,high pressure,with polythene float and flynut complete,screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

Taking up or down steel /UPVC water tubing and connections,15 mm bore complete all as specified and directed.

S&F 15mm dia tubes ‘Medium grade’ galvanized with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

S&F 15mm bore unplasticised PVC pipes with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

Taking up or down steel /UPVC water tubing and connections,20 mm bore complete all as specified and directed.

S&F 20 mm water tubes, 'Meduim grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F 20 mm bore Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe complete all as specified and directed.

S & F in repair vitreous china wash hand basin, flat back, size 550x400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and directed.

S&F in repairs vitreous China squatting pan, orissa pattern of size 580x440mm, white with integral foot rest incl connection to trap & flushing pipe complete all as specified and directed.

S & F in repair vitreous china wash down water closet pan (pedestal pattern ) p or s type (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed.

S & F in repairs Vitreous China urinals, half stall urinal, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe).

S&F in repair plastic water closet seat cover, white or black colour closed pattern with flat bottom including taking down old seat cover complete all as specified and as directed.

S&F in repairs 10 litres capacity PVC valveless symphonic action type, flushing cistern, low level, white, with inlet, ball valve float handle including brackets all as specified.

S&F in repair 32mm brass chromium plated waste coupling for wash hand basin complete all as specified and directed.

S&F in repairs Pillar taps, cast copper alloy, with capstan heads, chromium platedscrewed down highpressure, with orwithout lettered 'Hot' or 'Cold' withlong screwedshanks and fly-nuts,screwed for iron pipe and fixed to 15mm bore pipe all as specified.

S & F in repairs Bib taps fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed to 15mm bore pipe complete all as specified and directed.

S&F in repairs Stop valves fancy type cast copper alloy,screwed down,high pressure,with crutch orbutterfly handle,screwed bothends for iron pipe or fo runions and fixed to15mm bore pipe complete all as specified and directed.

S&F in repairs Swan neck pillar cock, brass chromium plated for wash basin 360 degree moving spout fixed to 15mm bore pipe complete all as specified and directed.

S & F in repairs toilet paper holder complete all as specified and directed.

Supply and fix in repairs 32 mm size waste pipe for wash hand basin / urinal / sink complete all as specified and directed.

Supply and fix in repairs 40 mm size waste pipe for wash hand basin / urinal / sink complete all as specified and directed.

S&F in repairs Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 190gms) complete all as specified and directed.

S&F in repair Stainless steel sink with drainage board made out of 1 mm thick sheet of overall size 495x420mm with bowl size 410x330 x160mm with plugs washers, CP waste coupling and 40mm dia GI light grade waste pipe upto chamber fixed on and including cantilever angle iron 25x25x6mm (2 Nos) brackets complete including making good the disturbed surface using PCC 1:2:4 type B-I using 20 mm graded stone aggregate complete all as specified and directed.

S & F in repairs Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.

Demolition cement concrete (unreinforced) concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for 75mm thick Cement concrete Type D2 1:4:8 (40 mm graded graded aggregate) as in floor finishes and pavings complete all as specified and directed.

M&L for 20 mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified and directed.

M & L Chequred cement concrete tiles 20cm x20cmx 25mm thick with grey cement and pigment , set jointed in neat cement slurry complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors aprons etc laid bedded and pointed in any mortar complete all as specified and directed.

Dismantling of stone slabs and paver block tiles of any description or thickness in floors laid bedded and pointed in any mortar complete all as specified and directed.

M&L Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L for machine pressed precast conctete interlocking paver block any shape and size with grey cement and pigment confirming to IS : 15658-2006 of 60mm thickness M-35 Grade complete all as specified and as directed.

All as per item No 108 here in before but except tiles.

M&L for machine pressed precast conctete interlocking paver block any shape and size with grey cement and pigment confirming to IS : 15658-2006 of 80mm thickness M-40 Grade complete all as specified and as directed.

All as per item No 110 here in before but except tiles.

M & L factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and as directed.

M&L for preparation of old painted surfaces of wall / concrete surfaces over 10cm width or girth not otherwise described and applying one coats of synthetic enamel paint complete all as specified.

M&L for preparation of new surfaces of wall / concrete surfaces over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint complete all as specified.

M & L for precast cement concrete 1:2:4 Type B1 using 20 mm graded aggregate for manhole covers/ drain covers complete all as specified and directed.

M & L for TMT bars 10mmm dia and above cut to length, bent to shape required, including crancking, bending spirelly for hooping ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

S&F in repairs PVC (SWR) pipes 160mm bore single socketed in any length with rubber ring joints fixed to walls for rain water pipes complete all as specified and directed.

S&F in repairs PVC (SWR) bends any radius 160mm dia complete all as specified and directed.

S&F in repairs PVC connection 15 mm size with PTMT nuts on both end, length 450 mm, including taking down old PVC connection complete all as specified and directed.

S & F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm fixed with MS screw & bolts in repairs complete all as specified and directed.

S & F in repair 300 mm size mild steel ordinary rat tail, rod pattern springs including roller and roller plate complete all as specified and directed.

Demolition of cement concrete of (unreinforced) any description and in any position not otherwise specified complete all as specified and directed.

M&L cement concrete type B1 1:2:4 (20mm graded aggregate) for plinth protection etc. complete all as specified and directed.

Repairs to rolling shutter door any size and incl taking down, refixing in same opening after alingment & greasing as required complete all as specified and directed.

S&F in repairs 15 mm CP Bib cock 2 way with wall flange and single knobs complete with all fittings and as specified .

S&F in repairs CP Overhead rain shower - ABS type Square 180x180mm complete with all fittings as specified .

S&F in repairs CP Health Faucet ABS body (Push type) with wall hook and 1.0 mtr SS Braded rubber hose pipe complete all as specified and directed.

S&F in repairs Corner glass shelf 300x300 mm with 'D' / F type brackets complete all as specified and directed.

S&F in repairs CP Urinal spreaders complete all as specified and directed.

Dismantling of ceiling board/false ceiling any Size and thickness complete all as specified and directed.

Providing and fixing Gypsum Board 605x605x 12mm thick in ceiling fixed with screw as per manufacturer's instructions, complete all as specified and directed.

S&F Anodised aluminium snap grid size 605x605mm frame work for false ceiling complete all as specified and directed.

S&F Hangers 6 mm dia. G.I. (upto 1200mm length) (size of grid 605x605mm ) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed.

S&F in repairs Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed to 15mm bore pipe complete all as specified and directed.

S&F in repairs cabinet mirror for bathroom and fixed to wooded plug with chromium plated brass screw complete all as specified and directed.

S&F in repair grating round 140mm size of PTMT (Minimum weight 50 gms) complete all as specified and directed.

S&F in repairs polycarbonate sheet any colour and any shape and sizes including cutting, bending, wastages of materials and fixed aluminium plates with screw, complete with all fittings complete all as specified and directed.

TECH SERVE SOLUTIONS