REPAIR TO FLOOR AND SANITARY FITTING IN CERTAIN BUILDING, PROVN OF ADDITIONAL 500 LTR CAPACITY PVC WATER TANK IN MARRIED AND OTM ACCN AND PROVN OF KITCHEN CABINET IN CERTAIN BLDGS AT ICGS OKHA UNDER GE (I) CG PORBANDAR

Amount

SCHEDULE 'A'

M & L PCC 1:5:10, type E2 as in sub base of floor mass filling using 40mm graded aggregate with using water proofing compound, complete all as specified and as directed by Engr-in-Charge. Note: Supply of water proofing compund shall be measured and paid separately

M & L Providing, cement concrete Type B-1, 1 :2 :4 (20 mm graded stone aggregate) rounded or chamfered on edges in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed by Engr-in-Charge.

Supply only integral waterproofing compound, complete all as specified and as directed by Engr-in-Charge.

M & L Polythene film 150 micron thick laid on a coat of bitumen primer @ 0.30 kg/sqm, complete all as specified and as directed by Engr-in-Charge.

M & L Porbandar block stone masonry, built in CM 1:6, complete all as specified and as directed by Engr-in-Charge.

S&F 75 mm long Aluminium Anodised barrel tower bolts of extruded section and fixed, complete all as specified and as directed by Engr-in-Charge.

S&F 100 mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21, complete all as specified and as directed by Engr-in-Charge.

S&F 100 mm long Extruded aluminium alloy handles fabricated type anodised, complete all as specified and as directed by Engr-in-Charge.

S&F Brass Drawer pulls 3 screw plate with fixed dished pull 80 to 100mm long , complete all as specified and as directed by Engr-in-Charge.

S&F 75 mm long Hasp and staple aluminium anodised with hinge pin including bolt to hinge plate and fixed with screws, complete all as specified and as directed by Engr-in-Charge.

S&F 20mm dia, Tubular towel rail, D type, 60cm long between flanges and brass chromium plated, complete all as specified and as directed by Engr-in-Charge in repairs

S&F Framed work confirming to Fe-410-0 or Fe-310-0 such as in grills etc with ends of bars shouldered and/or riveted, complete all as specified and as directed by Engr-in-Charge.

M&L 40mm thick, PCC (1:2:4) type B-1 using 20mm graded stone aggregate, finished even & smooth with using extra cement, etc , complete all as specified and as directed by Engr-in-Charge.

M&L Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2kg/sqm, incl cleaning surface, complete all as specified and as directed by Engr-in-Charge.

M&L APP Based Polymeric memberane minimum weighing 3 kg /sqm and minimum 3mm thick Reinforced with polyster non wove fabric (wt not less than 150 gms/ sqm) land on primed surface by forced application, complete all as specified and as directed by Engr-in-Charge.

Taking down rain water pipe and eaves gutters (any size and pattern) including all fittings heads shoes bends swan necks etc, complete all as specified and as directed by Engr-in-Charge.

M&L 0.90mm thick Decorative laminate type 1,of surface finish,colour and pattern as approved, fixed with approved adhesive as per manufacturers instructions, complete all as specified and as directed by Engr-in-Charge.

M&L 12 mm thick Plywood, grade BWR, type BB, fixed screws to timber frame work in cup board shutters/shelves including wooden beading around, complete all as specified and as directed by Engr-in-Charge.

M&L 18mm thick Granite (of any type) in slabs (table rubbed and polished in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admicture pigements to match the shade of granite, complete all as specified and as directed by Engr-in-Charge.

M&L 30 mm thick PCC 1:2:4 type B0 using 12.5 mm graded stone aggregate using water proofing compound as in sunken floor (WPC shall be measured and paid separately), complete all as specified and as directed by Engr-in-Charge.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to removesust,etc. and brushing neat cement slurry with 3.0 kg of cement per sqm, complete all as specified and as directed by Engr-in-Charge.

S&F Coloured glazed ceramic tiles 450x300mmx7 to 8mm thick on vertical surfaces including 15mm thick screed plastering in CM 1:4 Such as skirting dados and riser to step etc set jointed in neat cement slurry and pointed in white cement to match, complete all as specified and as directed by Engr-in-Charge.

S&F Non skid coloured glazed ceramic tiles 400x400mmx7mm thick in floors laid over 15mm thick screed in CM 1:6 etc set jointed in neat cement slurry and pointed in white cement to match, complete all as specified and as directed by Engr-in-Charge.

M&L Double Charged Vitrified ceramic coloured tiles with dark shade size 600 x 600 x 10 mm thick, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles including 15 mm thick scread bedding in cement mortar 1:4, complete all as specified and as directed by Engr-in-Charge.

- Ditto - all as per item here in before but vertical Surfaces including 15 mm Thick Plaster CM 1:4, complete all as specified and as directed by Engr-in-Charge.

M&L 15mm thick Rendering in CM 1:6 on fair faces of masonry or concrete surfaces, finished even and smooth without using extra cement, complete all as specified and as directed by Engr-in-Charge.

M&L 15mm thick Rendering in CM 1:4 on fair faces of masonry or concrete surfaces, finished even and smooth without using extra cement, complete all as specified and as directed by Engr-in-Charge.

M&L 5mm thick Rendering in CM 1:3 on concrete surfaces on ceiling finished even and smooth without using extra cement, complete all as specified and as directed by Engr-in-Charge.

M&L 15mm thick Rendering on fair face of masonry or concrete surfaces in CM 1:4 finished including mixing water proofing compound as per manufacturer instruction, complete all as specified and as directed by Engr-in-Charge. Note :- WPC will be measured and paid seperatly.

Taking down cement plaster includiing raking out joints hacking for key and scrubbing down with water, complete all as specified and as directed by Engr-in-Charge.

M&L Preparing newly plastered surfaces of walls applying three coats of white wash, complete all as specified and as directed by Engr-in-Charge.

M&L Preparing newly plastered surfaces of walls and applying two coats of cement base paint over a coat of primer, complete all as specified and as directed by Engr-in-Charge.

M&L Preparing newly plastered surfaces of ceiling and applying three coats of white wash, complete all as specified and as directed by Engr-in-Charge.

M&L Preparating new wooden surfaces of any description exc 10cm width or girth & aplying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and as directed by Engr-in-Charge.

M&L 20mm bore GI Tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors, complete all as specified and as directed by Engr-in-Charge.

Taking down steel tubing and connections 15 mm bore including cleaning for refixing or removal from site, complete all as specified and as directed by Engr-in-Charge.

Taking down steel tubing and connections 20 mm bore including cleaning for refixing or removal form site, complete all as specified and as directed by Engr-in-Charge.

Refixing old steel tubing 20mm bore and connections in new or old position (Walls, ceiling, floors, etc.), complete all as specified and as directed by Engr-in-Charge.

S&F 16 mm bore, 3 layer PP-R (Poly propylene random copolymer) pipes [concealed pipes SDR 7.4 (PN16) UV stablized and antimicrobial fusion welded] having thermal stability for hot and cold water supply including PP-R plain and brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. , complete all as specified and as directed by Engr-in-Charge.

S&F 20 mm bore, 3 layer PP-R (Poly propylene random copolymer) pipes [concealed pipes SDR 7.4 (PN16) UV stablized and antimicrobial fusion welded] having thermal stability for hot and cold water supply including PP-R plain and brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc., complete all as specified and as directed by Engr-in-Charge.

S&F Water tank lid Exc 250 and n exc 500 ltr open or closed hoisted and fixed in position, complete all as specified and as directed by Engr-in-Charge. in repairs.

S&F Water tank lid Exc 500 and n exc 1000 ltr open or closed hoisted and fixed in position, complete all as specified and as directed by Engr-in-Charge. in repairs.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately)

Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc and writing the date of cleaning etc complete all as specified and as directed.

S&F 500 litre capacity rotational moulded polythylene water storage tanks (cylindrical, vertical with closed top ) hoisted and fixed in position all specified in SSR Part-I including provision of 200mm long 50mm bore GI nipples for inlet, outlet, overflow, drain out pipe including provision of check nuts

S&F 750 litre capacity rotational moulded polythylene water storage tanks (cylindrical, vertical with closed top ) hoisted and fixed in position all specified in SSR Part-I including provision of 200mm long 50mm bore GI nipples for inlet, outlet, overflow, drain out pipe including provision of check nuts.

S&F 1000 litre capacity rotational moulded polythylene water storage tanks (cylindrical, vertical with closed top ) hoisted and fixed in position all specified in SSR Part-I including provision of 200mm long 50mm bore GI nipples for inlet, outlet, overflow, drain out pipe including provision of check nuts.

S&F 15mm nominal bore Bib tap, cast copper alloy, with crutch or butterfly handle, screwed down, suitable for iron pipe, complete all as specified and as directed by Engr-in-Charge. in repair. Make : Prayag (Cat Pat No-8608) or equivalent model as approved by Engr-in-Charge.

S&F 15 mm bore CP Pillar taps fancy type , cast copper alloy, with capstan heads screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks & fly-nuts, screwed for iron pipe, complete all as specified and as directed by Engr-in-Charge. in repairs. Make : Prayag (Cat Pat No-8302) or equivalent model as approved by Engr-in-Charge

S&F Brass CP Mixer for Mixing Hot & cold Water Screwed Down For Iron Pipe of size 15 mm bore and fixed, complete all as specified and as directed by Engr-in-Charge. in repairs. Make : Prayag (Cat Pat No-9016) or equivalent model as approved by Engr-in-Charge

S&F 20mm bore Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle,screwed both ends for iron pipe or for unions and fixed in position, complete all as specified and as directed by Engr-in-Charge. in repairs. Make : Prayag (Cat Pat No-8520) or equivalent model as approved by Engr-in-Charge

S&F 15mm nominal bore Stop valve, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends, suitable for iron pipe complete all as specified in repair. Make : Prayag (Cat Pat No-8518) or equivalent model as approved by Engr-in-Charge

S&F 15 mm bore Concealed stop cock fancy type, chromium plated with long shank and cup, complete all as specified and as directed by Engr-in-Charge. in repairs. Make : Prayag (Cat Pat No-PIS-26) or equivalent model as approved by Engr-in-Charge. Make : Prayag (Cat Pat No-PIS-26) or equivalent model as approved by Engr-in-Charge

S&F 20 mm bore Gun-metal gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and as directed by Engr-in-Charge. in repairs.

S&F 25 mm bore Gun-metal gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and as directed by Engr-in-Charge. in repairs.

S&F 20 mm bore ball brass valves , high pressure , with polythene float and flynut conmplete, screwed for iron pipe all as specified, complete all as specified and as directed by Engr-in-Charge. in repairs.

S&F 20 mm dia ball valves high pressure of PTMT epoxy coated aluminium rod & high density plastic ball, complete all as specified and as directed by Engr-in-Charge.

S&F 25 mm bore ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed, complete all as specified and as directed by Engr-in-Charge. in repairs.

S& F Bore dia of discharge pipe 32 mm Waste Coupling PTMT(half or Full Threaded) minimum Weight - 45 gms including waste pipe of PVC, complete all as specified and as directed by Engr-in-Charge. in repairs.

S&F 15mm size of length 300mm PVC connections with PTMT nuts , complete all as specified and as directed by Engr-in-Charge. in repairs.

S&F 75mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints laid in trenches or in floors.

S&F 150mm bore size PVC (SWR) pipe for rain water pipe conforming to IS, pressure rating at 2.5 Kg/Sq cm incl standard PVC clamp & embedded in PCC block incl jointing of pipes, complete all as specified and as directed by Engr-in-Charge.

S&F 110 mm dia PVC pipe grade ‘A’ single socketed in any length, jointing with cement solvent solution, fixed to walls, complete all as specified and as directed by Engr-in-Charge.

S&F 110 mm dia PVC bend for pipe, complete all as specified and as directed by Engr-in-Charge.

S&F 75 mm bore PVC (SWR) bends of any radius, complete all as specified and as directed by Engr-in-Charge.

S&F 40mm bore Brass Chromium Plated Bottle Traps for wash basins with inlet and outlet screwed for pipe or connection including necessary packing union and cap and fixed, complete all as specified and as directed by Engr-in-Charge. in repairs.

S&F Plastic water closet seat cover black closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device, complete all as specified and as directed by Engr-in-Charge. in repairs.

S&F Vitreous china wash down water closet pan (pedestal pattern) white & Trap including connection to drain (or out going pipe and to flushing pipe,antisyphonage pipeincluding flush pipe &jet pressure etc., complete all as specified and as directed by Engr-in-Charge. in repairs. Make : Prayag cat no 4018 or equivalent model as approved by Engr-in-Charge

S&F Toilet paper holder Vitreous china box type of fixed to walls with chromium plated (CP) brass screws of brass, chromium plated, complete all as specified and as directed by Engr-in-Charge. in repairs. Make : Prayag (Cat Pat No BA-08) or equivalent model as approved by Engr-in-Charge

S&F Vitreous china wash hand basin, white, flate back size 550x400mm inclfancy type waste, chain and plug and porcelain stopper incl brackets all as specified, complete all as specified and as directed by Engr-in-Charge. in repairs. make : prayag (cat no 4645) or equivalent model as approved by Engr-in-Charge

S&F Soap dish,Brass, glossy finish, fixed to wall with cement mortar, complete all as specified and as directed by Engr-in-Charge. in repairs. Make : Prayag (Cat Pat No-BA-45) or equivalent model as approved by Engr-in-Charge

S&F Brass CP shower rose with or without swivel joints to steel pipe or union complete all as specified and as directed, complete all as specified and as directed by Engr-in-Charge. in repairs. Make: Prayag (Cat Pat No-BOS-11) or equivalent model as approved by Engr-in-Charge

S&F Sinks made of stainless steel 1 mm thick kitchen with plugs washer and wastes including beeding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 430mmX510mmX203mm bowel size 430mm X380mmX203mm, complete all as specified and as directed by Engr-in-Charge.in repairs. Prayag (Cat Pat No-1218D) or equivalent model as approved by Engr-in-Charge

S&F Vitreous China water closet of ‘Orissa pattern ‘ white of size 580 X 440 with integral foot rest including connection to trap, flushing pipe , anit- syphonage pipe incl provn of lime concrete bedding, complete all as specified and as directed by Engr-in-Charge. in repairs. Prayag (Cat Pat No-4054) or equivalent model as approved by Engr-in-Charge

S&F Vitreous china urinal Half stall type white with grating and union for discharge pipe incl providing and fixing plugs bedding urinal against wall in CM 1:2 securing urinal to plugs with and incl wast pipe, complete all as specified and as directed by Engr-in-Charge. in repairs. Prayag (Cat Pat No-4998) or equivalent model as approved by Engr-in-Charge

S&F PVC flushing cistern 10 ltr capacity, valveless, syphonic action type, , low level , white with inlet ball valve float and handle including brackets and flush pipe of PVC 32 mm dia, complete all as specified and as directed by Engr-in-Charge. in repairs. Make : Cera/ Commander (Slim line)/ Prayag (Cat Pat No-501) or equivalent model as approved by Engr-in-Charge

S&F 600 mm x 450 mm bevelled edge mirror , mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and as directed by Engr-in-Charge. in repairs. Make : Modiguard/ Atul

Supplying and laying 20 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors, complete all as specified and as directed by Engr-in-Charge.

Demolition of stone /boulders masonary work built in CM including all quoins, arches, pillars etc & removing from site, complete all as specified and as directed by Engr-in-Charge.

Demolition of stone slab and tilles of any description or thickness in floors aprons etc laid bedded and pointed in any mortar, complete all as specified and as directed by Engr-in-Charge.

Demolition of PCC (unreinforced) as in ground floors & paving n.exc 15 cm thick (below or above GL) and disposal of debris where directed, complete all as specified and as directed by Engr-in-Charge.

Dismantling cast iron pipes of any dia and any description including all fittings, complete all as specified and as directed by Engr-in-Charge.

Demolition of cement concrete in ground floors and pavings exc 15 cm thickness above ground level as in sunken floors etc, complete all as specified and as directed by Engr-in-Charge.

S&F Hand faucet jet with flexible pipe 1.20 mtr long, complete all as specified and as directed by Engr-in-Charge. in repair. Make : Prayag (Cat Pat No-501) as approved by Engr-in-Charge

Supply and fixing 18/19 mm thick plywood, grade BWR,type BB, fixed with nails,adhesive as in cupboards,shelves,shutters, complete all as specified and as directed by Engr-in-Charge.

S & F 100 mm size Chromium plated grating of best quality, complete all as specified and as directed by Engr-in-Charge. in repairs.

M & L 100 mm dia PVC floor trap with grating, jointed to waste pipe fixed in cement concrete type B-1 (1:2:4)

S&F Soft Closing ball bearing Teliscopic channel bright Zinc plated of Size 51 mmX 50.8 cm use for sliding of kitchen cabinet and drawers , complete all as specified and as directed by Engr-in-Charge.

Machine cutting/ grinding the top surface of existing Kota stone/terrazzo flooring/skirting with 120 number fine grinding stone and washing the floor with oxalic acid and floor cleaned, complete all as specified and as directed by Engr-in-Charge.

Magnus Enterprise

m/s.a.t.odedra

roxy enterprise