Supply, Installation, Testing and Commissioning of Semi Modular Operation Theatre at DH Gandhidham,Tal. Gandhidham Dist. Kutch

Name of Work : Supply, Installation, Testing and Commissioning of Semi Modular

Operation Theatre at DH Gandhidham,Tal. Gandhidham Dist. Kutch

Quantities Total Amount

Quantities Total Amount

estimated In Figure According to

NBO NO. but may be Description Unit

No. In Words estimated

less Rs. Ps. quantities Rs. Ps.

Supply, Installation, Testing and Commissioning of

mm thick Pre Fabricated Modular Operation Theater

Panels (Walls and Ceiling) made out Polyurethane

foam injected at 40 Kg/m3 sandwiched between

0.8 mm thick GP and SP sheet on front side and

mm GP and SP/PPGI sheet on back-side. The inner

surface walls be fixed to the bricks wall with essential

support. There will be minimum possible cavity/gap in

between solid and steel walls and will be variable to

suit the architects lay out for the flush mounting of the

equipments. The wall and ceiling panels must comply Rupees Six Thousand Sq

with necessary provision of to JIS Z 2801/ISO 22196, Five Hundred Fifty Only Mtrs.

52210-2:1984-08, DIN 4102-1, Class A2. Any Third-

party compliance certificate mandatory. Panel should

be covered with protective sheath of 300 d.f.t Anti-

bacterial Paint having undergone Washability/Water

resistance Test JIS K 5663.7.12, permeability test less

than 200 unit of permeability, Anti-bacterial effect

against staphyloccoccus aureus, Escherichia coli (via

HALO test) and safety and causative agents such as

formaldehyde, toluene, xylene, paradichlorobenzene

The flooring within the surgical theatre should consist

of a minimum of 2mm thick antistatic seamless PVC,

ensuring durability and safety. This floor should be

smooth, non-slip, and made from an impervious

material with sufficient conductivity to dissipate static

electricity effectively, yet not so conductive as to risk

electric shock to personnel. The PVC used should be of

very high quality, particularly designed for

electrostatic charge dissipation, and should not be less

than 2 mm in thickness. The installation process

should utilize continuous rolls, and joints should be Rupees Four Thousand Sq

seamlessly welded using special PVC thermal welding Two Hundred Fifty Only Mtrs.

units with welding bars of the same color to ensure

uniformity and prevent contamination. The sheets

should be highly durable, capable of resisting shocks,

indentations, and scratches. The conductive material

should be uniformly impregnated within the PVC as

grains to enhance its antistatic properties.

Additionally, the flooring should be inert to body

fluids, chemicals, and disinfectants, and remain

unaffected by temperature variations typical within an

operating theatre. It should efficiently discharge

electric charges up to 2 kV, and the electrical

The door to the surgical theatre should be a

hermetically sealed, single sliding door measuring

meters in height and 1.5 meters in width. The door

should be equipped with a controller capable of being

operated by elbow switches, foot switches, and a

touchless sensor, providing multiple, accessible control

options. The track for the door should be made from

stainless steel or aluminum, with the running surface

for the top rollers angled appropriately to minimize

resistance and facilitate smoother movement. The

door leaf should be suspended using high-quality hard Rupees Two Lac Ninety

plastic rollers with double bearings at the top. These Five Thousand Only

rollers should run under the stainless steel or

aluminum track to ensure smooth and noiseless

operation. The opening and closing mechanisms of the

door should be controlled by a microprocessor for

precise electromechanical movement. The material of

the door should be either SMS or HPL, with a color that

matches the interior design. The door should be

designed to be strong yet lightweight for ease of use.

In case the automatic mechanism fails, the door

should still be able to open and close effortlessly

manually. The handle of the door should be made

Hatch boxes should be provided in each operating

theater to facilitate the safe and efficient removal of

waste materials to the dirty linen area or adjacent

corridor. Each hatch box should be equipped with two

doors, operated electrically or motorized, designed

such that only one door can be opened at a time to

prevent cross-contamination. UV lighting should be

installed to ensure sterilization and should remain on Rupees One Lac Fifteen

when both doors are closed, automatically turning off Thousand Only

when either door is opened. Indicators should be

provided on both sides of the operating theater to

monitor the door open/close status. The material of

the hatch box should also be SS304 grade stainless

steel, with a minimum size of 600mm x 600mm.

Supply, Installation, Testing and Commissioning of

Double-Bay Scrub Sink - The scrub station should be

compact, designed for use in the OT complex, and

facilitate pre-procedural scrubbing. It should be made

from heavy gauge type 304 stainless steel with a

minimum thickness of 1.5mm and feature seamless

welded construction polished to a satin finish. The

scrub sink should have a front access panel for easy

maintenance of water control valves, waste

connections, stoppers, and strainers. Hands-free

operation should be enabled through infrared sensors Rupees One Lac Twenty

with programmable adjustments. Thermostatic mixing Six Thousand Only

valve control should maintain constant water

temperature and be located behind the access panel.

Timing should be adjustable to meet individual usage

requirements, and units should have reduced anti-

splash fronts. An additional knee/foot-operated switch

should also be provided for enhanced functionality.

Supply, Installation, Testing and Commissioning of

Storage Units - Storage units should be constructed

with same material, as wall and ceiling panels. The

shelves, made of glass and, should be removable for

cleaning. The unit should be divided into two or more

Rupees Eighty Five

6 2.00 parts, each with individual glass doors equipped with a 85000.00 Nos.

high-quality locking system. The overall size of the

storage unit should

be approximately 200 cm (H) x 120 cm (W) x 35 cm

AIR HENDALING UNIT Make:KrVelocity: Not More

Then 10 mt/second. , Canvass Connection-Heavy duty,

non partical shreding,Fire Retardentuger,Nikotra only

Type: PLUG,Drirect Driven,Dynamically Balanced

Selection of fan-Should run comfortably at 50 HZ at

rated capecity. Motor

Make:Siemence,B.B,Crompton,ABB , Type:TEFC, IP:55,

Foot Mounted, VFD compitable and I2 generation

Safety: Motor should have interlocked with AHU

Motor door/excess/Fire DamperType-TWO TIRE, Floor

Rupees Twelve Lac

Mounted , Inner const.:0.6mm plain G.I , Outer

7 1.00 1225000.00 Twenty Five Thousand job

const.:0.8 mm G.I. Pre coated / Powder coated

Thickness of Insulation: 25mm,PUF injected having

density 40 to 42 kg/m3. ,Colour:As approved by

CLIENT CONDENSING UNIT :

Condensing unit for AHU with all assesories and

instalation (Copper pipie provide 3 mtr Only Extra will

charged extra) consider 1200 sqfeet insulation

Double Dome OT Light with Ceiling mounted Double

Dome LED OT lights having following features and

enclosed technical specifications, having Mobile App

Connectivity, Battery Backup

-Light intensity Ec - 160 000 & 160 000 lux, - Light

intensity adjustment - 10 – 100% (using Digital

Capacitive Touch (Fully Remote Controlled)

- Color temperature Tc (with adjustment)

-Light field diameter d10 at Ec - 100 - 150 mm

-Working range - 1 m Rupees Three Lac Ninety

-Color rendering index 93Ra Thousand Only

- Focusing Preset: Adjustable

- LED Average life - 50000-60000 hrs

- Diameter of Light - not less than 650 mm per dome

- Power Consumption - not more than 120W

OT Light should be BIS marked; manufacturer should

have CDSCO License for this product under Class A,

Compliant to IEC standards such as IEC60601-

1:2005+A2:2020, IEC 60601-2-41:201 (Relevant Test

Certificates to be submitted with Bid) Clause-wise

Technical Compliance to be

Single-arm surgery/anesthesia pendant designed for

Operating Theatres should feature a compact, modular

configuration to meet the precise requirements of

hospitals, enabling customization to suit specific

operational needs of both Operating Theatres and

Intensive Care Units. It should be equipped with

robust ceiling support capable of mounting a selection

of arms. The extension arm, pivotal for functionality,

should allow horizontal movement with a radius of

800-900mm and provide a level rotation ranging from

0 to 330/340 degrees, with both the extension arm Rupees Two Lac Eighty

and terminal box designed to rotate together and Four Thousand Only

independently for maximum versatility. The pendant

should support a net loading capacity of min. 100 kg,

accommodating a variety of medical instruments and

devices securely. For medical and electrical services, it

should offer configurations that include at least two

oxygen outlets, two vacuum outlets, one medical air,

one medical air at 7 bar, and an optional nitrous oxide

outlet (In-scope of MGPS vendor) Additionally, there

should be six main sockets, each capable of supporting

5 to 15 amps, conforming to universal standards to

facilitate the operation of various medical and TOTAL

Rupees Thirty Seven Lac Sixty Nine Thousand Four Hundred Fifteen Only

I / We am / are willing to carry out the work at

percent ( Should be written in figures and words) of the Estimated rates mentioned above. Amount of my/our tender works out as under.

Estimated Amount put to tender. Rs.37,69,415/-

1 All work shall be carried out as per Public Works Department Handbook and other specifiations of Division or as directed.

2 All the column is Schedule should be filled in ink and the entries in the last column should be struck by the cotractor under his signature.

Rates quoted include clearance to site (prior commencement of work and at its close) in allrespects and hold good for work under all conditions,

site, moisture, weather etc.

Serviceble material available (if any) after Demolishing / Dismentalling any item should be hand over to the concerned PIU Site Engineer In

Charge. No Extra Payments will Done for any Demolishied or Dismentaled old Struture if require.

Signature of the contractor with seal: Signature of the Contracting Authority with seal: