Setting up of Elluent Testing laboratory at Valakom, in Kollam district - Structural Civil Work for setting up of ETP lab-General civil work 1

Amount

State Plan: Setting up of Effluent Quality Testing lab at Valakom

100.98.1008:Engaging Coolie.

50.6.2.2:Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete

5.3:Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 150 landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size).

5.9.3:Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform

5.22.1:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelMild steel and Medium Tensile steel bars

10.17:Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar, bent to shape with hooked ends in R.C.C. slabs or beams during laying, including painting the exposed portion of loop, all as per standard design complete.

50.9.1.1:Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately), using good quality Anjili wood /jack wood

50.9.3.1:Providing and fixing paneled or paneled and glazed shutters for doors, windows and clerestory windows, 30 mm thick shutters including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding paneling which will be paid for separately, all complete as per direction 0f Engineer in- charge. using Anjili/ Jack wood

9.53:Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

9.63.3:Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete:150x10 mm

9.70.2:Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete:100x58x1.90 mm

9.76:Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.

13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

13.51.2:Painting with silicon & acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces:Two coats

13.85.1:Applying priming coats with primer of approved brand and manufacture, having low VOC ( Volatile Organic Compound) content.With ready mixed pink or grey primer on wood work (hard and soft wood ) having VOC content less than 50 grams/ litre

13.58:Providing and applying two coats of fire retardant paint on cleaned wood/ply surface @ 3.5 sqm per litre per coat including preparation of base surface as per recommendations of manufacturer to make the surface fire retardant .

13.52.1:Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work

11.41.2:Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm.

8.2.2.2:Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Area of slab over 0.50 sqm

8.3.2:Providing edge moulding to 18 mm thick marble stone counters, vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer -in-Charge.Granite work

OD6466/2022-2023:Supplying and fixing slip on auto close hinges

17.11.2:Providing and fixing white vitreous china laboratory sink with C.I brackets, C.P. brass chain with rubber plug 40 mm C.P brass waste and 40 mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required:Size 600x450x200 mm

17.25.2:Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings:Flat back wash basin of size 550x400 mm

OD6468/2022-2023:Supply and providing the following size soft drawn copper pipe for the extending the pipe<br>between out door and in door unit, including the pipe using rubberized foam sleeve 10 mm thick, brazing, teak testing etc. (for extending length of pipe beyond standard length supplied with the unit), 6 mm (1/4"), 12.5 mm (1/2") & 5/8" dia 22 gauge soft drawn copper pipe insulated using 10 mm thick rubberized foam sleeve

OD6473/2022-2023:Supply and fixing SS cabinet handles

Appendix B - Plumbing

50.18.7.3.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 25 mm dia 10Kgf/ cm2- Internal work- Exposed on wall

50.18.9.14.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 32 mm dia 6 Kgf/cm2 - External work - Exposed on wall

50.18.9.16.1:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 50 mm dia 10Kgf/cm2 - External work - Exposed on wall

50.18.9.17.1:Providing and fixing PVC pipes including fixing the pipe with clamps/ clip at 1.00 m spacing . This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 63 mm dia 6 Kgf/cm2 - External work - Exposed on wall

50.18.9.20.1:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63 mm dia Elbow

50.18.9.20.2:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement -63 dia 45 degree Elbow

50.18.9.20.4:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63 mm dia Bend

50.18.9.20.5:Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes including jointing with PVC solvent cement - 63x63x63 mm dia Tee

50.18.9.20.7:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63 mm dia vent cowl

50.18.9.20.10:Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63x50 mm dia Reducer

50.18.9.22.4:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement- 110 mm dia Bend

Appendix C - Electrical

OD6474/2022-2023:Wiring for light point/ fan point/ exhaust fan point/ call bell poin.t with 1.sq. mm<br>FRLS PVC insulated copper conductor single core cable in surface I recessed medium<br>class PVC conduit, with modular switch. modular plate, suitable GI box and earthing<br>the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable<br>etc. as requir<br>Data derived from DSR E&M 1.10.3

OD6475/2022-2023:Supplying following rating, double (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing! MCB DB complete with connections, testing and commissioning etc. as required. DSR E&M 2.14.2

OD6476/2022-2023:Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. Derived from DSR 2.15.2

OD6477/2022-2023:Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.100 Amp TP&N. Data derived from DSR E&M 2016-3.2.4

OD6478/2022-2023:Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7metre long etc. (but without charcoal/ coke and salt) as required. Data derived from DSR E&M 2016-5.3

OD6479/2022-2023:Supply and drawing bare earthing conductors of the following sizes along with wiring /cables and giving connection as required.3.15 mm copper conductor (6 SWG)

OD6481/2022-2023:Supply and Fixing 25 mm X 5 mm copper strip: Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required. Derived from DSR 5.8

OD6482/2022-2023:Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 4 sq. mm + 1 X 4 sq. mm earth wire. Data derived from DSR E&M 2016 1.14.3

OD6483/2022-2023:Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire Data Derived from 1.14.2

OD6484/2022-2023:Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.2X1.5 sq. mm + 1 X 1.5 sq. mm earth wire. Data derived from DSR E&M 2016 1.14.1

OD6485/2022-2023:Supplying and fixing 20 A, 415 V. TPN Industrial type socket outlet, with 4 pole and earth, metal enclosed plug top along with 20 A "C" curve, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. DSR E&M 2016 2.19

OD6486/2022-2023:Supplying and fixing following size/ modules, PVC box along with modular base & cover plate for modular switches in recess etc. as required. 4 Module . Data derived from DSR E&M 2016 1.27.3

OD6487/2022-2023:Supplying and fixing following size/ modules, PVC box along with modular base & cover plate for modular switches in recess etc. as required. Data derived from DSR E&M 2016 1.27

OD6489/2022-2023:Supply of superior quality copper earth socket for the following sizes of earth conductor including crimping etc. as required 3.15 mm (10 SWG)

OD6490/2022-2023:Providing and laying earth connection from earth electrode with 4.00 mm dia copper wire in 15 mm dia G.I. pipe from earth electrode including connection with copper thimble excavation and re-filling as required. Derived from DSR 5.13

OD6491/2022-2023:Supplying and fixing 5 amps to 32 amps rating. 240/415 volts "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required <br>Single pole-breData derived from DSR ESM2016-2.10.1

OD6492/2022-2023:Supplying and fixing single pole blanking plate in the 23 existing MCB DB complete etc, as required.Data derived from DSR E&M 2016-2.11

OD6493/2022-2023:Supplying and fixing 3 pin. 5 A ceiling rose on the existing junction box/ wooden block including connection etc. as required. Data derived from DSR ESM 2016 1.33

OD6494/2022-2023:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 6 pin 15/16 A socket outlet Derived from DSR. 1.24.5

OD6495/2022-2023:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 3 pin 5/6 A socket outlet. 3 pin 5/6 A socket outlet. Data derived from DSR E&M 1.24.4

OD6496/2022-2023:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6 A switch. 1.24.1

OD6497/2022-2023:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc, as required. 15/16 A, one way modular switch. Data derived from E&M 2015 1.24.3

OD6507/2022-2023:Supplying and fixing following size modules, PVC box along with modular base & cover plate for modular switches in recess etc as required Data derived from DSR EAM 2016 127

OD21275/2022-2023:Supply and Fixing 4x10 sq mm 2x6 sq mm earth wire . Derived from DSR 1.7.10

OD6511/2022-2023:Supply, conveyance, installation testing of pre-wire wired LED tube light with fitting on wall/ceiling and giving connection with required length of 160.20mm 3 core round copper flex wire conforming to relevant ISS or extending the original wining and giving connection etc as required as directed by the departmental officers

OD6512/2022-2023:Supply conveyance, instalation and commissioning of light duty Exhaust fan of 300/305mm sweep in metal frame working on 230V AC 300 sweep including making good the damages etc as required as directed by the departmental officers

OD6513/2022-2023:Supply, conveyance instalation testing of ceiling fan of 1200mm sweep size of Crompton /Phips/Usha or very good quality make using standard accessories including electronic type regulator, the down rod with 16/0.20mm PVC insulated and PVC sheathes 3 core round copper conductor flex wire 650/1100V grade or with extended original wiring etc as required single control ceiling fan point with celling rose etc complete as directed by departmental officers

OD6514/2022-2023:Supplying and fixing following size modules, PVC box along with modular base & cover plate for modular switches in recess etc. as required. 6 Module .Data derived from DSR EAM 2016 1.27

Renjith M

Bidder Name

Renjith M

RATHEESH S