GE/SMB/T-09/2020-21

Amount

Demolition cement concrete (Un-reinforced) roofs, floor, beams, staircase, landing, chajjas and similar suspended work (other than ground floor )complete all as specified & as directed by Engineer-in-Charge incl removing demolished material out side MoD land

Demolition of cement concrete (Un-reinforced) in ground floor and pavings n exc 150 mm thick complete all as specified & as directed by Engineer-in-Charge incl removing demolished material out side MoD land

Demolition of brick work built in cement mortar including all quoins, Jambs, arches, pillars etc complete all as specified & as directed by Engineer-in-Charge

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided complete all as directed

Taking down old plaster Incl terazzo finish from bk/stone walls, raking out joints, hacking for key and scrubbing down with water etc incl removing demolished material out side MoD land

Dismantling floor hearth or wall tiling including cement mortar bedding but not backing complete all as specified and directed by Engr-in-charge

Complete removing existing roof treatment and roughening the surface and including preparation of concrete surface by picking sweeping cleaning and washing out with water to remove dust etc

M & L for brushing neat cement slurry with grey cement @ 3 kg/sqm of cement per sqm complete all as specified and directed by Engr-in-charge

M&L for PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in roof padding complete laid to slope and thickness as directed and finished top fair and even ( Mix to be using WPC ; WPC shall be measured at supply only rates ).

M&L fo APP based polymeric membrane minimum weighing 3.60kg/sqm and minimum 3mm thick reinforced with polyster non woven fabric, laid on bitumen coat surface by torched method / application including approved cold bitumeneous oil base primer (IS 3384) @ 0.30 LTR/ Sqm priming coat Complete all as specified and as directed by Engr-in-charge.work all as per ,amufacturers instructions (Bitumen to be purchased from authorised outlet only)

M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cm 1:6 complete all as specified & as directed by Engineer-in-Charge.

M & L RCC type A-1, 1:11/2:3 nominal mix as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like

S & F Mild steel TMT bars 6 to 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified.

Use and waste of Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) rough finished surface complete all as specified.

M&L for coping/bed blocks, kerb at junction of parapet wall & roof etc. in PCC 1:2:4 Type B-1 ( using 20mm gr. Cr. stone aggr) incl form work completle all as spd & dir.

M & L for Rendering 15 mm thick in 2 coat in cement mortar 1: 6 on faces of brick work or concrete surfaces, finished even and smooth w/o using extra cement complete all as specified and directed.

M & L for Rendering 15mm thick iin 2 coat in cement mortar 1: 4 on faces of brick work or concrete surfaces with WPC, finished even and smooth w/o using extra cement complete all as specified and directed. Note:- WPC measured seperately.

M & L for Rendering 10mm thick in cement mortar 1: 3 on ceiling of concrete surfaces, finished even and smooth w/o using extra cement complete all as specified and directed.

M & L for Rendering 15mm thick in cement mortar 1: 3 on faces of brick work or concrete surfaces of sunken slab etc with WPC, finished even and smooth w/o using extra cement complete all as specified and directed. Note:- WPC measured seperately.

M & L for Filleting as in repair in any position not exc. 25 sq cm and to any shape in cement mortar 1:3 including all mitres, stops, etc ,complete all as specified and directed.

M & L 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. complete all as spd & dir.over and incl 15 mm screed in CM 1:4

M & L for Jointless Non-skid coloured ceramic tiles 8 to 10 mm thick (square /rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed over and including M & L for screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM 1:6

M & L for Jointless Non-skid coloured ceramic tiles 7 to 8 mm thick (square /rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed over and including M & L for screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM 1:6

M & L for Jointless Non-skid coloured ceramic tiles 7 to 8 mm thick (square /rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in vertical surfaces etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed over and including M & L for 10 mm thick rendering in CM 1:4

M & L for jointless Glazed Ceramic coloured tiles in vertical surface 450X300X7/350X250X7mm/450X350X7mm mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed and incl. M & L for Rendering 10 mm thick on fair faces of brick work in CM 1:4 surfaces to receive tiles

M&L for Machine cut kota stone slab flooring 18-20mm thick over and incl 20mm thick cement screed base in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as spd & dir.

M&L for kota stone floor 18-20 mm thick, as in riser of steps, skirting, dado, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as spd & dir over and incl 10 mm thick cement screed base in CM 1:4

Taking down(Door) chowkats with shutters not exceeding 1.5 Sqm each (without taking off shutters from the frames) complete all as specified and directed.

Taking down (Door) chowkats or frames(Doors) with shutters (without taking of shutters from the frames) exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and directed.

S & F Pressed steel frames of size 125 mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed.

S & F Pressed steel frames of size 105 mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed.

M&L for 25mm thick Block boards, grade 2 quality, interior grade, decorative type with decorative face veneer on both faces fixed with screws to timber frame-work, fixed in repairs complete all as specified.

M&L for 18/19mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work in repairs, complete all as specified.

S & F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised, Width of flaps (when open) 40mm, complete all as specified.

M & L Hasp and staple, 100mm size, safety type, aluminium anodised including bolt to hinge plate and fixed with screws, complete all as specified.

M & L Providing and fixing factory made PVC internal UPVC (rigid) door frame of the size 100mm x 45mm with a wall thickness of 5mm, made out of extruded 5mm thick, PVC sheet of density 600kgs/cbm manufactured by an ISO-9000 certified company, mitre cut at two corners and joined with 4 nos of 150mm long brackets of 15mm x15mm M.S. square tube of 19 guage through out the frame .The door frame shall be fixed to the wall using 65/100mm long M.S. screws through the frame by using anchor fasteners, minimum of 4 nos .of screw to be provided for each vertical member & minimum 2 nos. for horizontal members etc. complete as per manufactures specification and direction of Engr-in-charge.

S & F Factory made 35mm thick, IInd class H.W.Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specification and direction of Engr-in-charge.

M & L for 35 mm thick 2nd class hard wood factory made shutter glazed /gauzed and skelton shutters single/double leaf, open rebated and prepared to receive glass, gauge etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads, for securing glass etc, sizes of members of shutters in wire mesh window/ventilators as specified in SSR Part I, Section 8, Clause 8.24(a), complete all as specified and directed.

M&L for factory made solid PVC moulded door shutter 28 to 30 mm (stiles) with 2,4,or 6 raised panel design with 2 mm thick moulded prelaminated PVC sheet on the front face and 2 mm prelaminated PVC sheet on back face ,complete all as specification and direction of Engr-in-charge.

Supply and fixing Box type Steel windows comprised of tubular frame and shutter made out of 1.25mm thick MS sheet tube factory made with double side hing wire gauge shutter and glaze shutter, of size 79 mm x 39 mm 16 gauze rectangular tubular frame with side hung shutters with glazing bars 12X3 mm flat iron including box/pintol type hinges with steel handles and steel peg stays, hold fast etc all as shown on drg no CEPZ/TD-354/09 sheet 1/3 to 3/3 complete dovetailed or welded complete including 10 mm squre bar as in grill 100mm C/C incl a shop coat of red oxid paint complete all as specified.

S & F II nd Class hard wood 100 mm thick frame with louvred frames 80 to 100 mm with fixed louvres of 4 mm thick frosted glass to frame put together, supplied and fixed complete all as specified and directed.

S & F for Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and directed.Grade 304

S & F in repair for Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and directed.Grade 304

S & F Aluminium alloy, anodised,sliding door bolt 250mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S & F 150 mm long aluminium handles, cast type, anodised and fixed, complete all as specified and directed.

S &F 200 mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed.

S & F Aluminium floor door stopper (150mm long) of aluminium alloy body and tongue, anodised, with hard drawn steel spring,complete all as specified and directed.

S & F 150 mm, mild steel rat tail, helical door springs including roller and roller plate complete, complete all as specified and directed.

S & F 100 mm long butt hinges, stainless steel 304 G, complete all as specified and directed.

M & L Sheet glass oridnary quiality and glazing with oil pully/wooden beads in square n. exc 0.50 sqm in each pane 4.00mm thick plain glass complete all as specified and directed.

M & L in repair Sheet glass oridnary quiality and glazing with oil pully/wooden beads in square n. exc 0.50 sqm in each pane 4.00mm thick plain glass complete all as specified and directed.

M & L Sheet glass figured oridnary quiality and glazing with oil pully/wooden beads in square n. exc 0.50 sqm in each pane 4.00mm thick plain glass complete all as specified and directed.

S&F in repairs Vitreous china WHB size 550x400mm including cutting or pinning inends of brackets or erecting incl 32mm dia waste pipe complete all as specified and directed.

Taking down eaves gutters and PVC rainwater pipes (any size or pattern), including all fittings,heads, shoes, bends, swan-necks, etc.,(measured overall as fixed along the centre line over fittings and accessories), complete all as specified and directed.

S & F PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S & F PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints, fixed to wall all complete all as specified and directed.

S & F PVC (SWR) pipes 75 mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S & F PVC (SWR) pipes 75 mm bore single socketed, in any length with rubber ring joints, fixed to wall all complete all as specified and directed.

S&F in repairs PVC (SWR) floor trap, 75mm dia outlet, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F in repairs PVC (SWR) 110mm bore bends any radius, complete all as specified and directed.

S&F in repairs PVC (SWR) 75mm bore bends any radius, complete all as specified and directed.

S&F in repairs PVC (SWR) 110mm bore bends with access door any radius, complete all as specified and directed.

S&F in repairs PVC (SWR) 75mm bore bends with access door any radius, complete all as specified and directed.

Taking up or down 15 mm bore steel tubing and connections, including cleaning for refixing or removal from site, complete all as specified and directed.

Taking up or down 20 mm bore steel tubing and connections, including cleaning for refixing or removal from site, complete all as specified and directed.

M & L Galvanised iron tubing medium grade with all fittings laid in floor , ceilings and fixed to wall 15mm bore, complete all as specified and directed.

M & L using old cleaned Galvanised iron tubing medium grade with all new fittings laid in floor , ceilings and fixed to wall 15mm bore, complete all as specified and directed.

M & L Galvanised iron tubing medium grade with all fittings laid in floor , ceilings and fixed to wall 20 mm bore, complete all as specified and directed.

M & L using old cleaned Galvanised iron tubing medium grade with all new fittings laid in floor , ceilings and fixed to wall 20mm bore, complete all as specified and directed.

Material and labour cement concrete 1:7:12 type F-2 (using 40 mm graded stone aggregate) as in sunken filling complete all as specified

M & L for Vitreous china squatting pan ' Orissa' pattern of size 580 mm x 440 mm white with integral foot rests incl. making good to floor to match with existing specification (excluding flushing cistern and flush pipe) fixed in repair, complete all as specified and directed.

S&F 10 litre capacity PVC flushing cistern, dual flush ,valve less symphonic type low level or high level with inlet, ball valve float chains pull and bracket ,complete all as specified and directed.

S & F 15mm bore bib tap long shank chromium plated,fancy type, with crutch or butterfly handle screwed down screwed for iron pipes or brass ferrule,fixed in repair complete all as specified and directed.

S& F of 15 mm bore CP pillar taps fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.

S & F C.P angle valve fancy type 15mm bore,cast copper alloy screwed down, high pressure,screwed both ends for iron pipe or union fixed in repair,complete all as specified and directed.

S&F in repair C.P. stop cock valve(fancy type) 15mm bore, cast copper alloy screwed down,high pressure, screwed both ends for iron pipe or unions( concealed type)complete all as specified and directed

S & F Chromium plated shower rose fancy type 125 mm with arm fixed in repairs to GI pipe complete all as specified and directed.

S & F Chromium plated tubular towel rail, 20mm dia, D type 60 cm long between flanges fixed in repair complete all as specified and directed.

M & L in repair 20 mm bore stop valve cast copper alloy secured down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions fixed in repair, complete all as specified and directed.

S & F in repair PVC connection 15 mm bore 45 cm long with brass nut complete

S&F in repair sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915 mm x 460 mm bowl size 410mm x 330mm x 160mm

S & F in repair Steel kitchen plate rack of size 24x24x10 inches, complete all as specified and directed.

Dismantling of PVC water tank, 250 but n exc 500 ltrs capacity , complete all as specified and directed.

S&F Rotational moulded polye- thylene water storage tanks of capacity 500 ltrs (cylindrical vertical with closed top) hoisted and fixed in position including all necessary connections all as specified in SSR Part I , complete all as specified and directed. incl 20mm bore ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe

Dismantling of PVC drain pipe up to 100 mm bore cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required , complete all as specified and directed.

M and L for Providing and fixing V-board Visaka / E-board of make Everest, of size 600 x 600 mm,4mm thick white prelaminated self embossed reinforced designer ceiling board tiles of approved texture at all height laid on hot dipped GI imposed grid with 24 mm wide T sec exposed flanges which shall be power coated white.The frame shall comprise of main runner made from 0.3mm thick GS sheet and of size 24x32x300mm and spaced at 1200mm centres securely fixed to the structural soffit by approved hangers at 1200mm max. centres. Hangers/suspenders with two run of 2mm dia of GI wire to be fixed by approved rawl plug,level adjusters and screws etc. The last hanger at the end of each runner shall be greater than 450mm from adjcent wall .Flush fitting of 1200mm long cross Tee (with double stiching) to be interlocked bitween main runner of 600mm centres to form 1200x600mm modules, cross Tee longer than 600mm to be supported independentely 600x600mm modules be formed by fitting 600mm long cross Tee centrally bitween 1200mm cross Tee .Tee and perimeter wall angle shall be of 0.45mm thick GS sheet of size 19x19mm and 300mm long of white colour and necessary drilling etc as per manufactureres instructions complete all as specified and directed. NOTE - The quoted rate shall interalia include cost of followings - (a) Taking down exising ceiling incl taking down existing ceiling fan 12 nos and refixing ceiling fan 12 nos accomodated in ceiling (b) Disconnecting all point wiring for light fittings and fan and light and redoing the same with same wire (c) Only cost of ceiling rose and light fitting with connecting cable shall be measured sepaerately at supply only rates here in below. Fixing all included herein

Supply only ceiling rose surface PVC three terminal of size 50x 24 mm,240 Volts AC complete

Supply only Decorative ultra slim linear LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient tube light fitting including complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of 1.5 Sq mm with suitable size of 20 watt all as specified and directed by Engr-in-Charge. Cat Part No BS20WLED830SPCWH. Make Havells or equivalent

Cutting chases or making holes, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed.

Preparation of new wooden surface and applying two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces of any description not otherwise described over 10 cm width or girth, complete all as specified and directed.

Preparation of new steel surface and applying two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description not otherwise described over 10 cm width or girth, complete all as specified and directed.

Preparation of old steel surface and applying two coats of synthetic enamel paint over 10 cm width or girth, complete all as specified and directed.

Preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of primer, complete all as specified and directed.

Preparation of old plastered surfaces of wall and applying one coat of cement base paint on old decorated surface complete all as specified and directed.

Preparation of new untreated plastered surfaces of wall and applying two coat of oil bond distemper over a coat of chalk whiting including 3mm thick wall care putty , complete all as specified and directed.

Completely removing existing decoration on wall / celing

M&L for two coats of white wash incl preparation to old plastered surfaces of ceiling completed all as spd & dir.

M&L for 3 coats of white wash incl preparation to newly plastered surfaces of ceiling completed all as spd & dir.

M&L for 3 coats of white wash incl preparation to newly plastered surfaces of wall completed all as spd & dir.

Preparation of new untreated plastered surfaces of wall and applying two coat of synthetic enamelled paint over a coat of 3mm thick wall care putty , complete all as specified and directed.

Supply only liquid water proofing compound ,complete all as specified and directed.

M & L for 75mm thick PCC 1:3:6 type C-2 (using 20 mm graded crushed stone aggregate) as in plinth protection finished even and smooth using extra cement aaid in bays n exc.2.00 m and joints filled with bitumen sand mastic fill with ratio 1:3, complete all as specified and directed.

S & F Chequered cement concrete tiles 20cm x 20cm x 25mm/30cmx30cmx20mm thick,PU coated,rubber moulded glosy finish, set, jointed and pointed in neat cement slurry with grey cement and pigment in floors over 20mm thick screed bed in cement mortar 1:6 complete all as specified.incl roughening surface

S&F 20mm dia dropery curtain rod with suitable brackets and end caps fixed in repairs.

Taking down carefully aluminium / copper point wiring light/fan/socket or power complete including unscrewing from board fitting and fixture such as switches, sockets, ceiling roses, lamp holders, brackets, pendent holder , light fittings , regulators, distribution/ meter boards , MCBs etc and making good the distturbed surface matching with existing specifications complete all as specified and directed.

M & L for point wiring with PVC insulated unsheathed multi stranded copper conductor cable of 1.5 sqmm size 1100 volts grade drawn through and including non metalic rigid PVC conduit of siitable size with all fittings (ISI Mark) controlled by one switch including MS sunk box of required size, & 3mm thick laminated sheet, including cutting chases to wall making good match with the existing specification with all accessories fixed on wall including PVC insulated, unsheathed multistranded copper onductor cable of size 1.5 sqmm as earth continuty conductor connecting to common earth dolly and for having the switches, switch sockets regulator but for 01 light point controlled by 01 way switch

All as per item no 106 above but for 01fan/exaust fan point controlled by 01 way switch

All as per item no 106 above but one call bell controlled by independent board

All as per item no 106 above but for 01 light point controlled by 02 way switch

All as per item no 106 above but for 01 ,5 Amps socket point on independent board

All as per item no 106 above but for 01 , 5 Amps socket point on same board

M & L for point wiring with PVC insulated unsheathed multi stranded copper conductor cable of 2.5 sqmm size 1100 volts grade drawn through and including suitable size PVC non metalic rigid casing and caping with all accessories fixed on wall including PVC insulated, unsheathed multistranded copper conductor cable 1.5 sqmm as earth continuty conductor, connecting to common eatrh dolly and PVC moulded box ISI marked for housing one No switch socket 15Amps complete all as directed

S & F Switch piano flush type, single pole, 5 Amp, two way, AC 230 volts etc complete, all as specified and directed.

S & F Switch piano flush type, single pole, 5 Amp, one way, AC 230 volts etc complete, all as specified and directed.

S & F Switch piano flush type, single pole, 15 Amp, one way, AC 230 volts etc complete, all as specified and directed.

S & F Switch Socket combination outlet, 2 in 1, 6 pin, 5 /15 Amp, flush type, AC 230 volts etc complete all as specified and directed.

Socket outlet, 3 pin, 5Amps, flush type, AC 230 volts etc complete all as specified and directed.

Supply and fix ceiling rose surface PVC three terminal of size 50x 24 mm,240 Volts AC complete

Supply and fix bell push, single pole one way 06 Amps.

Supply & fix Bell, ding dong AC, 230 volts, single pole complete all as specifeid and directed.

Supply and fix ( Geyser ) water storage heater , electric . 25 L cap BEE 5 star rated with se of hot and cold flexible connection pipe and connected and fixed into wall make Standard cat no Amazer H 25 Ltrs , white or equivalent in bajaj/havells and including S & F cast iron/pressed steel terminal boxes 60 mm deep for mounting switches sockets etc with 3 mm plastic laminated sheet cover of size 150 mm x 75 mm .

M&L Lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendant fitting complete all as specifeid and directed.

Supply & fix LED lighting unit 18 W 230 V box type all as per Havells Cat no LHLDDBXEUL7Z020 and LUMILIPLUSBS18WLED865SPCSS for fitting and rod , bipin holder connector block and retro LED rod with aluminium heat sink and polycarbonate diffusers having high efficacy ( double side connection ) and connected with 3 core twisted flexible cable copper conductor of suitable size . The contractor shall produce LM 79 and LM 80 test report from OEM owned by NABL approved lab

S & F Electronic fan regulator, stepped type, hum free socket type suitable to control speed of fan 0-100%, 230 V etc complete all as specified and directed.

Supply & fixing LED Bulk head Sirius Series 10 W LED light cat Part NoHEXAFT10WLED857SSYMBPOC of Havells or equivalent

S&F MCB SP 6 to 32 Amp B-Series complete all as specified and directed by Engr-in-charge.

S & F RCCB SPN 240 volts, 40 Amps and sensitivity 30mA, with breaking capacity of 10 KA of approved make and cat part etc complete all as specified and directed.

Supply and fix sheet metal enclosure for TPN DBs when MCBs to be used , double door powder coated factory made flush fixed type with 200 Amps rated copper bus bar 240 V single phase 04 ways complete all as specified and directed by Engr-in-charge.

Supply and fix sheet metal enclosure for DBs when MCBs to be used , double door powder coated factory made flush fixed type with 200 Amps rated copper bus bar 240 V single phase 08 ways complete all as specified and directed by Engr-in-charge.

S&F MCB SPN, 63 Amps, 415 Volts B series

S&F MCB TPN, 63 Amps, 415 Volts B series

M&L for submain wiring with 2 runs of 4 sqmm and one run of 4.0 sqmm PVC insulated unsheathed multistranded copper conductor FRLS cable drawn through and including non metalic PVC conduit complete including connecting up all as specified and directed at site.fixed in repair

Supply and fixing 1100 volts grade XLPE heavy duty cable, 25sqmm 4 core, PVC insulated wire armoured Aluminium stranded conductor, served with inner sheathing of PVC tape and overall PVC sheathed laid in tranches.

Excavation in trenches not exceeding 1.5 mtr wide and 1.5 mtr in depth for laying of XLPE cable any type of soil all as specified and directed by Engr-in-Charge.

Returning and filling in incl spreading, levelling watering and well ramming in layers not exc 25 cm in soft / disintegrated rock all as specified and directed.

Removal of excavated surplus spoil /rocks at a distance not exc 50 mtr and depositing where directed at a level not exc 1.5 mtr from the starting point all as directed.

M & L Sand cushioning for cable in trenches of thickness 8 cms below and 15 cms above the cable all as specified and directed By Engineer-in-charge.

M&L Well burnt sub class 'B' bricks for protection of cable laying flat across and perpendicular to the length of cable all as specified and directed by Engineer-in-charge.

Earthing complete with galvanised steel earth plate electrode, 600mm x 600mm x 6mm thick, buried directly in the ground (earth pit not less than 2.25m deep below normal (ground level) with top edge of the plate not less than 1.50m below ground level connected to galvanized iron wire 4mm dia as earth lead by means of bolts, nuts and washers of GI up to test point, GI tubing 15mm bore light grade protection pipe, GI watering pipe 20mm bore medium grade with funnel and wire mesh, charcoal and salt, 40mm thick pre-cast RCC (1:2:4) type B-0 (Nominal mix) cover reinforced with XPM (weighing n.less than 4 Kg/Sqm) with suitable steel handle, and angle iron 40X40X3mm frame and chamber of PCC (1:3:6) type C-0 (including earth work in any type of soil, removal of surplus soil to a distance n.exc.50m) and connecting, testing on completion, all as shown on electric plate No. 03 of SSR-2009 Part-I, complete all as directed. Notes: 1. Earth lead & protection pipes length upto & including 7.50 metre. 2. Soil should be free from stone, boulders, aggregate, gravels etc.

THAKUR BUILDERS AND CO

RAMESHWAR ENGINEERS AND BUILDERS

M/S VERMA ENTERPRISES

SIDDAHANT ENTERPRISES

s k construction co

M/S NAGAR BUILDERS