Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹1.7 LAccepted-AOC | ₹1.7 L | 1 | Accepted-AOC 1st lowest |
| 2 | 2₹1.7 LRejected-AOC | ₹1.7 L | 2 | Rejected-AOC 2nd lowest |
| 3 | 3₹1.7 LRejected-AOC VILL EAST CHAKBHABANI GHOSHPARA P O P S BALURGHAT DIST DAKSHIN DINAJPUR | BALURGHAT | DAKSHIN DINAJPUR | WEST BENGAL | ₹1.7 L | 3 | Rejected-AOC 3rd lowest |
Tender Value
₹1.7 L
EMD Value
₹3,438
Closing Date
3 Jun 2026, 11:00 amClosed
Executive Enginner(A-I), Balurghat(A-I) Division
Uttar Chakbhabani, Balurghat, Dakshin Dinajpur
Repairing and maintenance of Go Down within stackyard of Balurghat AI Sub Division under Balurghat AI Division
2026_WRDD_1025550_1
WBWRDD/EE(AI)/BLG/NP/01/26-27
Open Tender
CIVIL WORKS
Percentage
Office Bunglow
Please refer Tender documents.
3 documents required · 3 mandatory
₹3,438
Yes
23 Jun 2026
27 May 2026
5 Jun 2026
27 May 2026
3 Jun 2026
27 May 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Taking out carefully G.C.I. orC.I. or asbestos sheets (including ridges etc.) fromroof orwall after unscrewing bolts, nuts, screws etc.and stacking the material at site as directed. Roof | 107.58 | Sqm | 41 | ₹4,410.78 |
| 2 | Supplying, fitting&fixing circular corrugatedAluminium sheet (excluding the supporting framework) of approved make&brand inalloy3105conforming to IS: 1254-1991 fittedand fixedwith55mm&25mmSelf tappingscrew, EPDMWasher16mmdia&3mmthwasheretccomplete with 150 mm. end lap and one corrugation minimum side lap. (Payment tobemadeonareaof finishedwork) (Aluminium sheet to be supplied by contractor). (i) In Roof:- a) With 0.65 mm thick sheet | 118.74 | Sqm | 774 | ₹91,904.76 |
| 3 | Aluminium sheet ridging fittedwith self tapping screws, EPDM washers etc complete.(Minimum 225mm end lapping). (A) 300 mm lapping each way (a) With 0.71 mm sheet | 15.34 | Meter | 394 | ₹6,043.96 |
| 4 | M.S. structural works with hollow sections (square or rectangular shape) conforming to IS: 806-1968 & IS:1161-1998) connected to one another with bracket, gusset, cleat as per design, drawing & direction of Engineer-in-Charge complete including cutting to requisite shape & size, fabrication including metal arc welding conforming to IS: 816-1969 & IS: 9595 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. Payment to be made on the basis of calculated weight of structural memebrs of MS Holow Section as specified in relevent IS code in finished work. Payment for gusset, bracket, cleat may be made by adding the actual weight of such items with weight of finished structural members. The rates are considered for a hight of erection 8 m. / 2nd floor level from the ground. Add 1.5 % extra over the rate for each additional floor or 4m. beyond the initial 8 m. or part thereof. The rate includes the cost of all M.S. Hollow section, all consumables such as electrodes, gas and hire charges of all tools and plants and labour reqired for execution and all incidental chages (such as electricity, labour insurance) etc. complete. For roof truss works a) Span up to 12 Mtr | 0.25 | M.T | 74,284 | ₹18,571 |
| 5 | Supplying, fitting and fixing steel rolling shutter profile type with 18B.G.ofapprovedtypesteel latchesection75mmwide, fittedwith coil wire spring tonecessiate the fittingof requiredNos. ofC.I. Pulleysonheavytypesoliddrawnseamlesssteel tubecompletewith locking arrangements both inside and outside specially built up side guide channels including providing a hood for the steel rolling shutter in the room,painting two coats of approved aluminium paint over a coat of red lead primer complete. | 5.95 | Sqm | 3,270 | ₹19,456.5 |
| 6 | Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. | 35.69 | Sqm | 29 | ₹1,035.01 |
| 7 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surfacebysandpaperingetc. including using of approved putty etc. on the surface, if necessary :On steel or other metal surface : With super gloss (hi-gloss) Two coats (with any shade except white) | 35.69 | Sqm | 79 | ₹2,819.51 |
| 8 | Add [email protected]%(On item no 1 to 7) | 1 | Item | 25,963.47 | ₹25,963.47 |
| 9 | Add [email protected]%(On item no 1 to 8) | 1 | Item | 1,702.05 | ₹1,702.05 |
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.55 MB
Tendernotice_2.pdf
PDF • 0.90 MB
BOQ_2520028.xls
BOQ • 0.34 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].