Balance Works for Construction of Speciality Hospital at Mattannur, Kannur District, Kerala State including all associated MEP Services and Utilities for Health and Family Welfare Department, Govt. of Kerala

Amount

CIVIL WORK INCLUDING PHE WORKS

2.1.1 : Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m and lift up to 1.5 m, disposed soil to be levelled and neatly dressed:All Kinds of soil

2.3.2.A : Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness In area of light jungle - By Mechanical Means

2.6.1 : Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil

2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

2.10.1.1 : Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil. and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m:All kinds of soilPipes, cables etc, not exceeding 80 mm dia

2.10.1.2 : Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil. and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m:Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia

2.25 : Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.

2.26.1 : Extra for every additional lift 1.5 m or part there of in excavation / banking excavated or stacked materials.All kinds of soil

2.26.2 : Extra for every additional lift 1.5 m or part there of in excavation / banking excavated or stacked materials.Ordinary or hard rock

3.6 : Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m

3.13.1.A : Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom, backfilling the excavation earth to the extent required and utilising the remaining earth locally for road work.Ordinary soil - Manual Means - (Depth upto 3 M)

3.17 : Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of table 300-2.

3.24.A : Construction of unlined surface drains of average cross sectional area 0.40 sqm in soil by mechanical Means to specified lines, grades, levels and dimensions to the requirement of clause 301 and 309. Excavated material to be used in embankment within a lead of 50 metres (average lead 25 metres)

4.1.6 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size)

4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

4.1.B.1 : Construction of granular sub-base by providing graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401. Grading-V - For sub base cum drainage layer - Mix in Place Method

4.12 : Providing, laying, spreading and compacting graded stone aggregate to Wet Mix Macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.

5.1.a : Providing and applying primer coat with bitumen emulsion ( SS) on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 - 1.0 kg/sqm using mechanical means.

5.2.a : Providing and applying tack coat with bitumen emulsion( RS) using emulsion pressure distributor at the rate of 0.20 - 0.30 kg per sqm on the prepared bituminous surface cleaned with mechanical broom.

5.3.2.a : Providing and laying bituminous macadam with 80-100 TPH hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading premixed with bituminous binder (VG 30), transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction.For Grading II - (19 mm nominal size)

5.6.1.a : Providing and laying bituminous concrete with 80-100 TPH hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder( NRMB) @ 5.2 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects For Grading - I ( 19 mm nominal size )

5.9.1 : Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete

5.9.2 : Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

5.9.3 : Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform

5.9.5 : Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers

5.9.6 : Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts

5.9.7 : Centering and shuttering including strutting, etc. and removal of form for:Stairs, (excluding landings ) except spiral - staircases)

5.9.16.1 : Centering and shuttering including strutting, etc. and removal of form for:Edges of slabs and breaks in floors and wallsUnder 20 cm wide

5.9.18 : Centering and shuttering including strutting, etc. and removal of form for:Small surfaces such as cantilever ends, brackets and ends of steps, caps and bases to pilasters and columns and the like

5.9.19 : Centering and shuttering including strutting, etc. and removal of form for:Weather shade, Chajjas, corbels etc., including edges

5.11.1 : Extra additional height in centering, shuttering where ever required with adequate bracing, propping etc. including cost of de-shuttering and decentering at all levels, over a height of 3.5m, for every additional height of 1 metre or part thereof (Plan area to be measured).Suspended floors, roofs, landing, beams and balconies (Plan area to be measured)

5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

5.22A.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo - Mechanically Treated bars of grade Fe-500D or more

5.28 : Providing and fixing in position 12 mm thick bitumen impregnated fibre board conforming to IS: 1838, including cost of primer, sealing compound in expansion joints.

5.33.1 : Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. Additional cement requirement as per mix design shall be considered by the bidder while quoting nothing extra shall be paid on this account.All work upto plinth level

5.33.2 : Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. Additional cement requirement as per mix design shall be considered by the bidder while quoting nothing extra shall be paid on this account.All work above plinth level upto floor V level

5.34.1 : Extra for providing richer mixes at all floor levels. Note:- Excess/less cement over the specified cement content used is payable/ recoverable separately.Providing M-30 grade concrete instead of M-25 grade BMC/RMC. (Note:- Cement content considered in M-30 is @ 340 kg/cum).

5.44.1 : Providing and fixing of expansion joint system related with floor location as per drawings and direction of Engineer-In-Charge. The joints system will be of extruded aluminum base members, self aligning / self centering arrangement and support plates etc. as per ASTM B221-02. The system shall be such that it provides floor to floor /floor to wall expansion control system for various vertical localtion in load application areas that accommodates multi directional seismic movement without stress to it's components. System shall consist of metal profiles with a universal aluminum base member designed to accommodate various project conditions and finish floor treatments. The cover plate shall be designed of width and thickness required to satisfy projects movement and loading requirements and secured to base members by utilizing manufacturer’s pre-engineered self-centering arrangement that freely rotates / moves in all directions. The Self – centering arrangement shall exhibit circular sphere ends that lock and slide inside the corresponding aluminum extrusion cavity to allow freedom of movement and flexure in all directions including vertical displacement. Provision of Moisture Barrier Membrane in the Joint System to have watertight joint is mandatory requirement all as per the manufactures design and as approved by Engineer -in-Charge .(Material shall confirm to ASTM 6063).Floor Joint of 100 mm gap.

5.45.1 : Providing and fixing of expansion joint system related with wall joint (internal/ external) location as per drawings and direction of Engineer-In-Charge. The joints shall be of extruded aluminum base members, self aligning / centering arrangement and support plates as per ASTM B221-02. The material shall be such that it provides an Expansion Joints System suitable for vertical wall to wall/ wall to corner application, both new and existing construction in office Buildings & complexes with no slipping down tendency amongst the components of the Joint System. The Joint System shall utilize light weight aluminum profiles exhibiting minimal exposed aluminum surfaces mechanically snap locking the multicellular to facilitate movement. (Material shall confirm to ASTM 6063).Wall Joint of 100 mm gap.

5.46.1 : Providing and fixing of expansion joint system of approved make and manufactures for various roof locations as per approved drawings and direction of Engineer-In- Charge. The joints shall be of extruded aluminum base members with, self aligning and self centering arragement support plates asper ASTM B221-02. The system shall be such that it provides watertight roof to roof/roof to corner joint cover expansion control system that is capable of accommodating multidirectional seismic movement without stress to its components. System shall consist of metal profile that incorporates a universal aluminum base member designed to accommodate various project conditions and roof treatments. The cover plate shall be designed of width and thickness required to satisfy movement and loading requirements and secured to base members by utilizing manufacturer’s preengineered self-centering arrangement that freely rotates / moves in all directions. The Self centering arrangement shall exhibit circular sphere ends that lock and slide inside the corresponding aluminum extrusion cavity to allow freedom of movement and flexure in all directions including vertical displacement. The Joint System shall resists damage or deterioration from the impact of falling ice, exposure to UV, airborne contaminants and occasional foot traffic from maintenance personnel. Provision of Moisture Barrier Membrane in the Joint System to have water tight joint is mandatory requirement. Material shall confirm to ASTM 6063.Roof Joint of 100 mm gap.

6.4.2 : Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in:Cement mortar 1:6 (1 cement : 6 coarse sand)

6.28.2 : Brick work with common burnt clay machine moulded modular bricks of class designation 12.5 in exposed brick work including making horizontal and vertical grooves 10 mm wide 12 mm deep complete in cement mortar 1:6 (1 cement : 6 coarse sand).Above plinth level and upto floor V level

6.38 : Providing and laying autoclaved aerated cement blocks masonry with 100 mm thick AAC blocks in super structure above floor 2 level up to floorV level in cement mortar 1:4 (1 cement :4 coarse sand). The rate includes providing and placing in position 2 Nos 6 mm dia M.S. bars at every third course of masonry work.

6.47 : Providing and laying autoclaved aerated cement blocks masonry with 150mm/230mm/300 mm thick AAC blocks in super structure above plinth level up to floor Vlevel with RCC band at sill level and lintel level with approved block laying polymermodified adhesive mortar all complete as per direction of Engineer-in-Charge. (Thepayment of RCC band and reinforcement shall be made for seperately).

7.1.1 : Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand)

8.1.A : Construction of cement concrete kerb with top and bottom width 115 and 165 mm respectively, 250 mm high in M 20 grade PCC Using Concrete Mixer on M-10 grade foundation 150 mm thick, foundation having 50 mm projection beyond kerb stone, kerb stone laid with kerb laying machine, foundation concrete laid manually, all complete as per clause 409

8.2.2.1 : Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Granite of any colour and shadeArea of slab upto 0.50 sqm

8.2.2.2 : Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Area of slab over 0.50 sqm

8.3.2 : Providing edge moulding to 18 mm thick marble stone counters, vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer -in-Charge.Granite work

8.4.11 : Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign with 7years warranty manufactured as per IRC :67 made of Type IV micro prismatic grade sheeting fixed over aluminium sheeting, 2 mm thick/ aluminium composit material sheeting 4 mm thick with suitable back supporting frame of MS angle 25x25x3 and supported on GI pipe pole 50mm NB confirming to IS 1239 firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete min size 45 cm x 45 cm x 60 cm, 60 cm below ground level including painting all exposed surface with 2 coats of epoxy painting over epoxy primer and as per approved drawing and clause 801 including lettering symbols etc.75 cm triangle

8.4.12 : Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign with 7years warranty manufactured as per IRC :67 made of Type IV micro prismatic grade sheeting fixed over aluminium sheeting, 2 mm thick/ aluminium composit material sheeting 4 mm thick with suitable back supporting frame of MS angle 25x25x3 and supported on GI pipe pole 50mm NB confirming to IS 1239 firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete min size 45 cm x 45 cm x 60 cm, 60 cm below ground level including painting all exposed surface with 2 coats of epoxy painting over epoxy primer and as per approved drawing and clause 801 including lettering symbols etc.50cmx 60 cm rectangular (Single chevron etc.)

8.5 : Extra for providing opening or required size & shape for wash basin/kitchen sink in kitchen platform, vanity counter and similar location in marble/granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.

8.7.A : Providing and erecting overhead signs with retro reflectorised sign with 7 years warranty manufactured as per IRC67 made of Hign Intensity Micro Prismatic (Type IV ) grade sheeting fixed over corrosion resistant 2mm thick aluminium alloy sheet with vertical and lateral clearance given in clause 802.2 and 802.3 and installed as per clause 802.7 over a designed support system of aluminium alloy or galvanised steel trestles and trusses of sections and type as per structural design requirements and approved plansTruss and Vertical Support

8.10.2 : Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in Charge and finished smooth.Granite Stone of approved shade

8.11.2 : Painting lines, dashes, arrows etc on roads in two coats on new work with ready mixed road marking paint conforming to IS:164 on bituminous surface, including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control Up to 10 cm in width

8.16 : Reinforced cement concrete M-15 grade boundary pillars of standard design as per IRC:25-19767, fixed in position including finishing and lettering but excluding painting .

8.20 : Providing, Fixing and erecting 50 mm dia GI pipe railing in 3 rows duly painted on Tubular Steel Railing on Medium Weight Steel Channel ( ISMC series) 100 mm x 50 mm, 1.2 metres high above ground, 2 m centre to centre, complete as per approved drawings including painting over suitable primer .

8.23.A : Providing and erecting a "W" metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per clause 811.3

8.31 : Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622(thickness to be specified by the manufacturer), of approved make, in all colours,shades except burgundy, bottle green, black of any size as approved by Engineerin-Charge,in skirting, risers of steps and dados, over 12 mm thick bed of cementmortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @3.3kg per sqm, including pointing in white cement mixed with pigment of matchingshade complete.

8.35 : Providing and fixing reflective road studs (Raised Pavement Marker) of ' category A' made out of ASA/HIPS/ABS moulded body with shanks and conforming to ASTM D 4280, strong enough to support a load of more than 13.635 T when tested in accordance with ASTM D 4280, reflective panel confirming to ASTM D 788, and reflectivity conforming to clause 804.4. including installation, drilling, fixing with adhesive etc. with 2 years warranty for the road stud as well as for in field performance as per clause 804.7.3 Road Markers/Road Stud with Lense Reflector :-

9.48.2 : Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to openings/ wooden frames with rawl plugs screws etc

9.62.2 : Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete:250x16mm

9.70.1 : Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete:125x64x1.90 mm

9.76 : Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.

9.83 : Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.

9.84 : Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width form 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.

9.90.1 : Providing and fixing special quality chromium plated brass cupboard locks with six levers of approved quality including necessary screws etc. complete.Size 40 mm

9.92.1 : Providing and fixing chromium plated brass handles with necessary screws etc. complete:125 mm

9.96.1 : Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete:300x16 mm

9.97.1 : Providing and fixing aluminium tower bolts, ISI marked, anodised(anodic coating not less than grade AC 10 as per : 1868), transparent or dyed to required colour or shade, with necessary screws complete:300x10 mm

9.97.5 : Providing and fixing aluminium tower bolts, ISI marked, anodised(anodic coating not less than grade AC 10 as per : 1868), transparent or dyed to required colour or shade, with necessary screws complete:100x10 mm

9.101.2 : Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.Twin rubber stopper

9.103 : Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI marked, with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS: 1868) aluminium lever handles of approved quality with necessary screws etc . complete.

9.105.2 : Providing and fixing partition upto ceiling height consisting of G.I. frame and required board, including providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet with Zinc coating of 120 gms/ (both side inclusive), consisting of floor and ceiling channel 50 mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by 25 mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre. The boards are to be fixed to the frame work with joints staggered to avoid through cracks, M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5 mm each) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x0.5 mm), joint finisher and two coats of primer suitable for board as per manufacture's specification and direction of engineer in charge all complete.75 mm overall thickness partition with 12.5 mm thick double skin tapered edged plain Gypsum board conforming to IS : 2095 : part I

9.105.3 : Providing and fixing partition upto ceiling height consisting of G.I. frame and required board, including providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet with Zinc coating of 120 gms/ (both side inclusive), consisting of floor and ceiling channel 50 mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by 25 mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre. The boards are to be fixed to the frame work with joints staggered to avoid through cracks, M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5 mm each) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x0.5 mm), joint finisher and two coats of primer suitable for board as per manufacture's specification and direction of engineer in charge all complete.66 mm overall thickness Partition with 8 mm thick double skin Calcium Silicate Board made with Calcareous & Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process with Compressive Strength 225 kg/sq cm, Bending Strength 100 kg/sq cm

9.114.1 : Providing and fixing magnetic catcher of approved quality in cupboard/ward robe shutters, including fixing with necessary screws etc. complete.Triple strip vertical type

9.116 : Providing and fixing sliding arrangement in racks/ cupboards/cabinets shutter by with stainless steel rollers to run inside C or E aluminium channel section ( The payment of C or E channel shall be made separately

9.121 : Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross- section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminated shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame.

9.122.2 : Providing and fixing to existing door frames.30 mm thick Fiberglass Reinforced Plastic (F.R.P) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF) / Polystyrene foam to be used all filler material throughout the hollow panel, casted monoolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS : 14856, complete as per direction of Engineer-in-charge.

9.139 : Providing and fixing panic bar / latch (Double point ) fitted with a single body, Trim Latch & Lock on back side of the Panic Latch of reputed brand and manufacture to be approved by the Engineer -in-charge, all complete.

9.157.1 : Providing and fixing Pre-laminated medium density fibre board IS:14587:1998 marked, with one side decorative lamination other side balancing lamination Grade-I (exterior grade) in shelves with screws and fittings wherever required, edges to be sealed with PVC edge bending tape 2.00 mm thick of approved brand (fittings to be paid separately).Pre-laminated with decorative lamination one side and other side balancing laminaion exterior Grade-I MDF Board 18mm thick confirming to IS:14587.

9.157.2 : Providing and fixing Pre-laminated medium density fibre board IS:14587:1998 marked, with one side decorative lamination other side balancing lamination Grade-I (exterior grade) in shelves with screws and fittings wherever required, edges to be sealed with PVC edge bending tape 2.00 mm thick of approved brand (fittings to be paid separately).Pre-laminated with decorative lamination one side and other side balancing lamination exterior Grade-I MDF Board 25mm thick confirming to IS:14587.

9.158.1 : Providing and fixing in wall lining medium density fibre board IS: 14587: 1998 marked, Pre-laminated one side decorative lamination and other side balancing lamination, with necessary fixing arrangement and screws etc. complete.12 mm thick.

9.159 : Providing and fixing 25mm thick pre-laminated medium density fibre board exterior grade (Grade-I) IS:14587:1998 marked one side decorative and other side balancing lamination for cupboard shutters edges to be sealed with PVC edge bending tape 2.00 mm thick of approved brand including ISI marked nickeled plated bright finishing M.S. piano hinge IS: 3818 marked with necessary screwed complete.

9.161 : Providing and fixing fire resistant door frame of section 50 x 60 mm on horizontalside & 35 x 60 mm on vertical sides having built in rebate made out of 1.6 mmthick GI sheet ( Zinc coating not less than 120gm/m2) suita2ble for mounting 120min Fire Rated Glazed Door Shutters. The frame shall be filled with Mineralwool Insulation having density min 96Kg/m2 . The frame will have a provision ofG.I. Anchor fastners 14 nos ( 5 each on vertical style & 4 on horizontal style ofsize M10 x 80 ) suitable for fixing in the opening along with Factory madeTemplate for SS Ball Bearing Hinges of Size 100x89x3mm for fixing of fire ratedglazed shutter . The frame shall be finished with a approved fire resistant primeror Powder coating of not less than 30 micron in desired shade as per thedirections of Engineer - in- charge . (Cost of SS ball bearing hinges is excluded

9.162 : Providing and fixing 60 mm thick glazed fire resistant door shutters of 120 minFire Rating confirming to IS:3614 (Part II) or EN1634-1:1999, tested and certifiedas per laboratory approved by Engineer-in-charge, with suitable mounting ondoor frame, consisting of vertical styles, top rail & side rail 60 mm x 60 mmwide and bottom rail of 110 mm x 60 mm made out of 1.6mm thick G.I. sheet(zinc coating not less than 120gm/m²) duly filled mineral wool insulation havingdensity min 96 kg/m³ and fixing with necessary stainless steel ball bearing hingesof size 100x89x3mm of approved make, including applying a coat of approvedfire resistant primer or powder coating not less than 30 micron etc all completeas per direction of Engineer-in-charge (panelling to be paid for seperately

9.164 : Providing and fixing glazing in fire resistant door shutters, fixed panels & partitionsetc., with G.I. beading made out of 1.6 mm thick G.I. sheet (zinc coating not less than120 gm/m²) of size 20 x 33 mm screwed with M4 x 38 mm SS screws at distance 75 mmfrom the edges and 150 mm c/c , including applying a coat of approved fire resistantprimer/powder coating of not less than 30 micron on G.I. beading, & special ceramictape of 5 x 20 mm size etc complete in all respect as per direction of Engineer-incharge.The glass shall be clear, toughened, interlayered, non-wired fire resistant having11 mm thickness of approved brand with 120 minutes of fire resistance both integrity &radiation control (EW120) and minimum 15 min of insulation (EI15) and having a soundreduction of ?37dB and LT of 86%. Glass shall be compliant to class 2(B)2 category ofImpact Resistance as per EN 12600. The glass should be manufactured in UL & TUVaudited Facility and including UL-EU Certification.The maximum glazing size cannotbe more than 1100 mm x 2200 mm (w x h) or 2.42 sq mts in total area. The test report forthe complete system (Glazed Door or Partition) will be considered valid only if it containsthe stamp and signature of the authorized signatory from the glass manufacturer.(Actual glass size is to be measured at site for payments).

9.165.1 : Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete.125 mm

10.1 : Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

10.6.1 : Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.80x1.25 mm M.S. laths with 1.25 mm thick top cover

10.7 : Providing and fixing ball bearing for rolling shutters.

10.8.1 : Extra for providing mechanical device chain and crank operation for operating rolling shuttersExceeding 10.00 sqm and upto 16.80 sqm in the area

10.16.1 : Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes

10.17 : Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar, bent to shape with hooked ends in R.C.C. slabs or beams during laying, including painting the exposed portion of loop, all as per standard design complete.

10.25.1 : Item Shifted to head 14 as item 14.74Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In stringers, treads,landings etc. of stair cases, including use of chequered plate wherever required, all complete

10.25.2 : Item Shifted to head 14 as item 14.74Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

10.28 : Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)

11.3.1 : Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate)finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.40 mm thick with 20 mm nominal size stone aggregate

11.41.2 : Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm.

11.46.2 : Providing and laying Vitrified tiles indifferent sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm

11.56.1 : Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.

12.24.3.1 : Providing and fixing insulating board ceiling of approved quality with necessary nails etc. complete (frame work to be paid separately):Flame retardant face insulating board12 mm thick

12.27.4.1 : Extra for Circular cutting including wastages in ceiling with:Flame retardant face insulating board12 mm thick

12.32 : Extra for sunk or raised mouldings in the plaster of Paris (Gypsum anhydrous) ceiling.Extra for sunk or raised mouldings in the plaster of Paris (Gypsum anhydrous) ceiling .

12.45.2 : Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with:12.5 mm thick tapered edge gypsum fire resistant board conforming to IS; 2095-Part I

12.53 : Providing and Fixing 15 mm densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture spintone /cosmos /Hexa or equivalent of size 595x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side) consisting of main 'T' runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross "T" of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main 'T' of size 24 x 28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main'T' at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross 'T' of length 600 mm and size 24x28 mm made of 0.33 mm thick (minimum) sheet to be inter locked at middle of the 1200x600 mm panel to from grid of size 600x600 mm, resting on periphery walls/partitions on a Perimeter wall angle pre-coated steel of size (24x24x3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved texture (Spintone / Cosmos/hexa) in the grid, including cutting / making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever require. Main 'T' runners to be suspended from ceiling using G.I slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size of 85x30x0.8 mm, spaced at 1200mm centre to centre along main 'T' bottom exposed with 24 mm of all T- sections shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawings and as directed by by engineer-in-charge. Note:- Only calcium silicate false ceiling area will be measured from wall to wall. No deduction shall be made for exposed frames/opening (cut outs) having area less than 0.30 sqm. The calcium silicate ceiling tiles shall have NRC. value of 0.50 (Minimum), light reflection > 85% non - combustible as per B.S. 476 part IV, 100% humidity resistance and also having thermal conductivity < 0.043 w/m 0 KC.

13.1.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

13.1.2 : 12 mm cement plaster of mix:1:6 (1 cement : 6 fine sand).

13.4.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 coarse sand)

13.4.2 : 12 mm cement plaster of mix:1:6 ( 1 cement : 6 coarse sand)

13.5.F.P.1 : Plain/Reinforced cement concrete in sub-structure complete as per drawing and Technical Specifications RCC Grade M25 - Using concrete Mixer - Height upto 5m

13.6 : Supplying, fitting and placing HYSD bar reinforcement in sub-structure complete as per drawing and Technical Specifications

13.7.1 : 12 mm cement plaster finished with a floating coat of neat cement of mix:1:3 ( 1 cement : 3 fine sand)

13.16.1 : 6 mm cement plaster of mix:1:3 ( 1 cement : 3 fine sand)

13.22 : Extra for plastering exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof.

13.28.2 : 12 mm thick plain cement mortar bands in cement mortar 1:4 ( 1 cement : 4 fine sand) :Sunk Band

13.28.3 : 12 mm thick plain cement mortar bands in cement mortar 1:4 ( 1 cement : 4 fine sand) :Raised Band

13.28.4 : 12 mm thick plain cement mortar bands in cement mortar 1:4 ( 1 cement : 4 fine sand) :Moulded Band

13.43.1 : Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer

13.45.1 : Finishing walls with textured exterior paint of required shade:New work (Two or more coats applied @ 3.28 ltr/ 10 sqm ) over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm

13.46.1 : Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

13.50.3 : Applying priming coat:With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron /steel works

13.60.1 : Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work

13.61.1 : Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work

13.62.1 : Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture .

13.80 : Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

13.85.3 : Applying priming coats with primer of approved brand and manufacture, having low VOC ( Volatile Organic Compound) content.With water thinnable cement primer on walls surface having VOC content less than 50 grams / litre

14.22 : Providing and laying of a strip seal expansion joint catering to maximum horizontal movement upto 70 mm, complete as per approved drawings and standard specifications to be installed by the manufacturer/supplier or their authorised representative ensuring compliance to the manufacturer's instructions for installation

15.3 : Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of Engineer -in-Charge.

16.68 : Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.

17.1.1 : Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm Sand Cast Iron P or S trap, 10 litter low level white P.V.C.flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever require:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

17.2.1 : Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:W.C. pan with ISI marked white solid plastic seat and lid

17.7.4 : Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Flat back wash basin size 550x400mm with single 15 mm C.P.brasspillar taps

17.10.1.1 : Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required:Kitchen sink with drain board510x1040 mm bowl depth 250 mm

17.10.2.2 : Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required:Kitchen sink without drain board610x460 mm bowl depth 200 mm

17.22A : Providing and fixing CP Brass 32mm size Bottle trap of approved quality & make and as per the direction of Engineer in charge.

17.28.1.1 : Providing and fixing P.V.C. waste pipe for sink or wash basin including PVC. waste fittings complete.Semi rigid pipe32 mm dia

17.31 : Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

17.32.4 : Providing and fixing mirror of superior glass ( of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Rectangular shape 1500x450 mm

17.34.1 : Providing and fixing toilet paper holder:C.P. brass

17.60.2.3 : Providing and fixing trap of self cleansing design with screwed down or hinged grating without vent arm complete, including cost of cutting and making good the walls and floors:100 mm inlet and 75 mm outletHubless centrifugally cast (spun) iron epoxy coated inside & outside as perIS:15905

17.72 : Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms

18.7.2 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall20 mm nominal outer dia pipes

18.7.3 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall25 mm nominal outer dia pipes

18.7.4 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall32 mm nominal outer dia pipes

18.7.5 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall40 mm nominal outer dia pipes

18.7.6 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall50 mm nominal outer dia pipes

18.8.2 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc.20 mm nominal outer dia pipes

18.8.3 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc.25 mm nominal outer dia pipes

18.8.4 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc.32 mm nominal outer dia pipes

18.9.2 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer- in-Charge. External work20 mm nominal outer dia pipes

18.9.3 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer- in-Charge. External work25 mm nominal outer dia pipes

18.9.4 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer- in-Charge. External work32 mm nominal outer dia pipes

18.9.6 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer- in-Charge. External work50 mm nominal outer dia pipes

18.9.7 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer- in-Charge. External work62.50 mm nominal inner dia pipes

18.9.8 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer- in-Charge. External work75 mm nominal inner dia pipes

18.9.9 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer- in-Charge. External work100 mm nominal inner dia pipes

18.9.10 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer- in-Charge. External work150 mm nominal inner dia pipes

18.15.2 : Providing and fixing brass bib cock of approved quality :20 mm nominal bore

18.16.2 : Providing and fixing brass stop cock of approved quality :20 mm nominal bore

18.17.1 : Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :25 mm nominal bore

18.17.2 : Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :32 mm nominal bore

18.17.3 : Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :40 mm nominal bore

18.17.4 : Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :50 mm nominal bore

18.18.2 : Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete:20 mm nominal bore

18.18.3 : Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete:25 mm nominal bore

18.19.2.1 : Providing and fixing gun metal non-return valve of approved quality (screwed end):32 mm nominal boreHorizontal

18.19.3.1 : Providing and fixing gun metal non-return valve of approved quality (screwed end):40 mm nominal boreHorizontal

18.19.4.2 : Providing and fixing gun metal non-return valve of approved quality (screwed end):50 mm nominal boreVertical

18.19.5.1 : Providing and fixing gun metal non-return valve of approved quality (screwed end):65 mm nominal boreHorizontal

18.19.5.2 : Providing and fixing gun metal non-return valve of approved quality (screwed end):65 mm nominal boreVertical

18.22.2 : Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet:150 mm diameter

18.49.1 : Providing and fixing C.P brass bib cock of approved quality conforming to IS: 8931.15 mm nominal bore

18.50.1 : Providing and fixing C.P brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.15 mm nominal bore

18.52.1 : Providing and fixing C.P brass stop cock ( concealed) of standard design and of approved make conforming to IS: 893115 mm nominal bore

18.53.1 : Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 893115 mm nominal bore

18.63 : Providing and fixing PTMT angle stop cock 15 mm nominal bore, weighing not less than 85 gms

18.74.1 : Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, Collar and bush approved quality and colour .15 mm nominal bore with 30 cm length

18.77 : Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof.

18.78 : Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.Il pipe etc.

18.79 : Making hole up to 20x20 cm and embedding pipes up to 150 mm diameter in masonry and filling with cement concrete 1:3:6 (1 cement : 3 coarse sand 6 graded stone aggregate 20 mm nominal size) including disposal of malba.

19.4.1.1 : Providing and fixing square-mouth S.W. gully trap class SP -1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:100x100 mm size P typeWith common burnt clay F.P.S. (non modular) bricks of class designation 7.5

19.7.1.2 : Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand) with R.C.C. top with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size,) inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) finished with a floating coat of neat cement complete as per standard design:Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weigh of cover 23 kg and weight of frame 15 kg):With Sewer bricks conforming to IS : 4885

19.8.1.1 : Extra for depth for manholesSize 90x80 cmWith common burnt clay F.P.S. ( non modular ) bricks of class designation 7.5

19.15.1 : Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand: 6 graded stone aggregate 20 mm nominal size) as per standard design.With 20x20 mm square bar

19.16 : Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS: 10910 on 12 mm dia steeel bar conforming to IS:1786, having minimum cross section as 23 mm x 25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufactures permanent identification mark to be visible even after fixing including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 ( 1cement: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size)Complete as per design

19.18.1 : Supplying and fixing C.I with out frame for manholes:455 x 610 mm rectangular C.I cover ( light duty ) the weight of the cover to be no less than 23 kg

19.19.1.1 : Providing and fixing in position Pre-cast R.C.C. manhole cover and frame of required shape and approved quality.L D - 2.5Rectangular shape 600x450 mm internal dimensions

19.19.1.2 : Providing and fixing in position Pre-cast R.C.C. manhole cover and frame of required shape and approved quality.L D - 2.5Square shape 450 mm internal dimensions

19.35.2 : Providing and laying Non Pressure NP-3 class (Medium duty) R.C.C. pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete.600 mm dia RCC pipes.

19.36.1 : Providing and laying Non Pressure NP-4 class (Heavy duty) R.C.C. pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete.450 mm dia RCC pipes.

19.36.2 : Providing and laying Non Pressure NP-4 class (Heavy duty) R.C.C. pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete.600 mm dia RCC pipes.

21.1.1.2 : Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)

21.1.2.2 : For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron)

21.2.2 : Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre- laminated particle board with decorative lamination on both sides

21.3.1 : Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness

21.3.2 : Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5.50 mm thickness

21.4.1 : Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS: 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors including cost of cutting floors, embeding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer -in- Charge.With stainless steel cover plate minimum 1.25 mm thickness

21.5 : Providing and fixing powder coated aluminium work ( minimum thickness of powder coating 50 micron) consisting of tee /angle sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-in-Charge ( level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately ).

21.12.2 : Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0mm thick & 2100 mm long with S.S. screws etc. complete as per direction of Engineer -in-Charge.Powder coated minimum thickness 50 micron aluminium tubular handle bar

21.13 : Providing and fixing 100 mm brass locks ( best make of approved quality ) for aluminium doors including necessary cutting and making good etc. complete

21.18 : Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge ( Door handle, lock and stopper etc to be paid separately)

22.5 : Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg /sqm mixed with water proofing cement compound @ 0.126 kg/ sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.

22.6 : Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying : a) after surface preparation, first layer of slurry of cement @ 0.488 kg/ sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. laying second layer of fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/ sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around. d) fourth and final layer of brick tilling with cement mortar (which will be paid for separately. For the purpose of measurement the entire treated surface will be measured)

22.14.1 : Grading roof for water proofing treatment with:Cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

22.23.1 : Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineerin-charge. The product performance shall carry guarantee for 10 years against any leakage.For vertical surface two coats @0.70 kg per sqm

22.23.2 : Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineerin- charge. The product performance shall carry guarantee for 10 years against any leakage.For horizontal surface one coat @1.10 kg per sqm.

25.1 : Providing and supplying aluminium extruded tubular and other aluminium sectionsas per the architectural drawings and approved shop drawings , the aluminiumquality as per grade 6063 T5 or T6 as per BS 1474,including super durable powdercoating of 60-80 microns conforming to AAMA 2604 of required colour and shadeas approved by the Engineer-in-Charge. ( The item includes cost of material suchas cleats, sleeves, screws etc. necessary for fabrication of extruded aluminiumframe work. Nothing extra shall be paid on this account).

25.2 : Designing, fabricating, testing, protection, installing and fixing in position semi(grid) unitized system of structural glazing (with open joints) for linear as well ascurvilinear portions of the building for all heights and all levels, including:a) Structural analysis & design and preparation of shop drawings for the specifieddesign loads conforming to IS 875 part III (the system must passed the proof testat 1.5 times design wind pressure without any failure), including functional designof the aluminum sections for fixing glazing panels of various thicknesses, aluminiumcleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clampsetc., structural and weather silicone sealants, flashings, fire stop (barrier)-cumsmokeseals, microwave cured EPDM gaskets for water tightness, pressureequalisation & drainage and protection against fire hazard including:b) Fabricating and supplying serrated M.S. hot dip galvanised / Aluminium alloy of6005 T5 brackets of required sizes, sections and profiles etc. to accommodate 3Dimentional movement for achieving perfect verticality and fixing structural glazingsystem rigidly to the RCC/ masonry/structural steel framework of building structureusing stainless steel anchor fasteners/ bolts, nylon seperator to prevent bimetalliccontacts with nuts and washers etc. of stainless steel grade 316, of the requiredcapacity and in required numbers.c) Providing and filling, two part pump filled, structural silicone sealant and onepart weather silicone sealant compatible with the structural silicone sealant ofrequired bite size in a clean and controlled factory / work shop environment ,including double sided spacer tape, setting blocks and backer rod, all of approvedgrade, brand and manufacture, as per the approved sealant design, within and allaround the perimeter for holding glass.d) Providing and fixing in position flashings of solid aluminium sheet 1 mm thickand of sizes, shapes and profiles, as required as per the site conditions, to seal thegap between the building structure and all its interfaces with curtain glazing tomake it watertight.e) Making provision for drainage of moisture/ water that enters the curtain glazingsystem to make it watertight, by incorporating principles of pressure equalization,providing suitable gutter profiles at bottom (if required), making necessary holesof required sizes and of required numbers etc. complete. This item includes costof all inputs of designing, labour for fabricating and installation of aluminium grid,installation of glazed units, T&P, scaffolding and other incidental charges includingwastages etc., enabling temporary structures and services, cranes or cradles etc.as described above and as specified. The item includes the cost of getting all thestructural and functional design including shop drawings checked by a structuraldesigner, dully approved by Engineer-in-charge.The item also includes the cost of all mock ups at site, cost of all samples of theindividual components for testing in an approved laboratory, field tests on theassembled working structural glazing as specified, cleaning and protection till thehanding over of the building for occupation. In the end, the Contractor shall providea water tight structural glazing having all the performance characteristics etc. allcomplete as required, as per the Architectural drawings, as per item description,as specified, as per the approved shop drawings and as directed by the Engineerin-Charge.Note:- 1. The cost of providing extruded aluminium frames, shadow boxes, extrudedaluminium section capping for fixing in the grooves of the curtain glazing andvermin proof stainless steel wire mesh shall be paid for separately under relevantitems under this sub-head. However, for the purpose of payment, only the actualarea of structural glazing (including width of grooves ) on the external face shallbe measured in sqm. up to two decimal places.Note:-2. The following performance test are to be conducted on structural glazingsystem if area of structural glazing exceeds 2500 Sqm from the certified laboratoriesaccreditated by NABL(National Accreditation Board for Testing and CalibrationLaboratories), Department of Science & Technologies, India. Cost of testing ispayable separately. The NIT approving authority will decide the necessity of testingon the basis of cost of the work, cost of the test and importance of the work.Performance Testing of Structural glazing systemTests to be conducted in the NBL Certified laboratories1. Performance Laboratory Test for Air Leakage Test (-50pa to – 300pa) & (+50pa to+300pa) as perASTM E-283-04 testing method for a range of testing limit 1 to 200 mVhr”2. Static Water Penetration Test. (50pa to 1500pa) as per ASTME- 331-09 testingmethod for a range up to 2000 ml.”3. Dynamic Water Penetration (50pa to 1500pa) as per AAMA 501.01-05 testingmethod for a range upto 2000 ml”4. Structural Performance Deflection and deformation by static air pressure test(1.5 times desing wind pressure without any failure) as per ASTME-330-10 testingmethod for a range upto 50 mm”5. Seismic Movement Test (upto 30 mm) as per AAMA 501.4-09 testing method forQualitative test” Tests to be conducted on site6. Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi)upto 2000ml”

25.4 : Extra for openable side / top hung vision glass panels (IGUs) including providingand supplying at site all accessories and hardwares for the openable panels asspecified and of the approved make such as heavy duty stainless steel frictionhinges, min 4 -point cremone locking sets with stainless steel plates, handles,buffers etc. including necessary stainless steel screws/ fasteners, nuts, bolts,washers etc. all complete as per the Architectural drawings, as per the approvedshop drawings, as specified and as directed by the Engineer-in-Charge.

25.5 : Providing,fabricating and supplying shadow box of required size and shape, for fixing in the spandrel portion of the structural glazing, in linear as well as curvilinear portions of the building by providing semi - rigid, inorganic, non- combustible fibre glass wool insulation 50 mm thick, conforming to IS: 8183 and BS: 3958 part 5. The insulation layer shall have facing (factory bonded on surface # 1 of the fibre glass insulation layer), of black non-woven fibre glass tissue of nominal thickness 0.5mm and nominal mass not less than 60 gm/ sqm, made of randomly oriented glass fibres distributed in a binder by a wet-lay process including fixing 1.5 mm thick solid aluminum sheet backing using, 6 mm thick cement board including SS rivets, nuts,bolts, washers etc complete.

25.6 : Providing and supplying Spandrel Glass Panels comprising of 6 mm thick heat strengthened monolithic Providing and supplying Spandrel Glass Panels comprising of 6 mm thick heat strengthened monolithic float glass of approved colour and shade with reflective soft coating on surface # 2 of approved colour and shade so as to match the colour and shade of the IGUs in the vision panels etc., all complete for the required performance as specified, as per the architectural drawings, as per the approved shop drawings, as specified, and as directed by the Engineer- in - Charge. For payment, only the actual area of glass on face # 1 of the glass panels (but excluding the area of grooves and weather silicone sealant) provided and fixed in position, shall be measured in sqm. (Payment for fixing of Spandrel Glass panels in the curtain glazing is included in cost of relevent item*).(ii) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face #2, + 12mm Airgap + 6mm Heat Strengthened clear Glass of approved make having properties as visible Light transmittance (VLT) of 25 to 35%, Light reflection internal 10 to 15%, light reflection external 10 to 20%, shading coefficient (0.25 - 0.28) and U value of 3.0 to 3.3 W/m2 degree K etc. The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement.

25.7 : Designing, fabricating, testing, installing and fixing in position Curtain Wall withAluminium Composite Panel Cladding, with open grooves for linear as well ascurvilinear portions of the building , for all heights and all levels etc. including:a) Structural analysis & design and preparation of shop drawings for pressureequalisation or rain screen principle as required, proper drainage of water to makeit watertight including checking of all the structural and functional design.b) Providing, fabricating and supplying and fixing panels of aluminium compositepanel cladding in pan shape in metalic colour of approved shades made out of4mm thick aluminium composite panel material consisting of 3mm thick FR grademineral core sandwiched between two Alumini um sheets (each0.5mm thick). Thealuminium composite panel cladding sheet shall be coil coated, with Kynar500based PVDF / Lumiflon based fluoropolymer resin coating of approved colourand shade on face # 1 and polymer (Service) coating on face # 2 as specified usingstainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backerrods etc.c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanisedwith serrations and serrated washers to arrest the wind load movement, fasteners,SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators toprevent bi-metallic contacts all complete required to perform as per specificationand drawing The item includes cost of all material & labour component, the cost ofall mock ups at site, cost of all samples of the individual components for testing inan approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wallwith aluminium composite panel cladding till the handing over of the building foroccupation. Base frame work for ACP cladding is payable under the relevantaluminium item.s The Contractor shall provide curtain wall with aluminiumcomposite panel cladding, having all the performance characteristics all complete, as per the Architectural drawings, as per item description, as specified, as per theapproved shop drawings and as directed by the Engineer-in-Charge.However, for the purpose of payment, only the actual area on the external face ofthe curtain wall with Aluminum Composite Panel Cladding (including width ofgroove) shall be measured in sqm. up to two decimal places.

26.30.1 : Drilling suitable holes in reinforced or plain cement concrete with power driven drill machine to a minimum depth of 100mm upto 200mm in RCC beams, lintels, columns and slabs to introduce steel bars for sunshades/balconies including fixing the steel bars in position using epoxy resin anchor grout of approved make but excluding the cost of reinforcement, all complete as per direction of Engineer-In-Charge.Upto and including 12mm dia.

26.31.2 : Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer-In-charge complete in all respect.Epoxy bonding adhesive having coverage 2.20 sqm/kg of approved make

26.45 : Supplying and installation of moisture resistant/fire resistant 6 mm thick Heavyduty fiber cement board (High pressure steam cured) conforming to IS14862:2000 of category III type B as per standard sizes fixed with self-drilling /taping screws. Screws shall be of counter sunk rib head of 1.60mm to 4 mmthick of 8 to 10 gauge of length varying from 25 to 45 mm.

50.6.1.1 : Solid block masonry using pre cast solid blocks ( factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part 1 of 1979 for foundation and plinth with thickness 20 cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete

50.6.1.2 : Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement: 6 coarse sand) etc complete.

50.6.1.3 : Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 Part I of 1979 for super structure above floor two level up to floor V level thickness 20cm and above in: CM 1:6 ( 1 cement :6 coarse sand) etc complete

50.6.3.2 : Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x10 cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level for 10 cm thick wall in : CM 1:6 ( 1 cement : 6 coarse sand) including cost of scaffolding complete

50.9.15.1 : Supplying and fixing 200 mm Aluminium aldrop

50.17.1.1 : Supplying and fixing Stainless steel soap dish including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.

50.17.1.5 : Supplying and fixing CP Health Faucet superior quality ( Jagur or equvalent make ) including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.

50.18.8.5.2 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 40 mm pipe 6Kgf/cm2

50.18.8.8.1 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 75 mm pipe 6 Kgf/cm2

50.18.8.9.1 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chased and making good the wall etc. 110 mm pipe 6kgf/cm2

50.18.9.5.1 : Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching refilling & testing of joints complete as per direction of Engineer in Charge 40 mm dia 10Kgf/cm2

50.18.9.6.1 : Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 50 mm dia 10Kgf/cm2

50.18.9.6.2 : Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 50 mm dia 6 Kgf/cm2

50.18.9.7.1 : Providing and fixing PVC pipes includings of pipes with one step PVC solvent cement, trenching refilling & testing of joints complete as per direction of Engineer in Charge. 63 mm dia 6Kgf/cm2

50.18.9.8.1 : Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 75 mm dia 6 Kgf/ cm2

50.18.9.8.2 : Providing and fixing PVC pipes includings of pipes with one step PVC solvent cement, trenching and refilling & testing of joints complete as per direction of Engineer in Charge. 75 mm dia 4 Kgf/cm2

50.18.9.9.1 : Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of Joints complete as per direction of engineer in charge.110 mm dia 6Kgf/cm2

50.18.9.9.2 : Providing and fixing PVC pipes includes joints of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in CHarge. 110 mm dia 4 Kg/cm2

50.18.9.10.1 : Providing and fixing PVC pipes includings jointing of pipes with one step pvc solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer in Charge. 150 mm dia 6 Kgf/cm2

50.18.9.16.2 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 50 mm dia 6Kgf/cm2 - External work - Exposed on wall

50.18.9.17.1 : Providing and fixing PVC pipes including fixing the pipe with clamps/ clip at 1.00 m spacing . This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 63 mm dia 6 Kgf/cm2 - External work - Exposed on wall

50.18.9.18.1 : Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This included jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 75 mm dia 6Kgf/cm2 - External work- Exposed on wall

50.18.9.19.1 : Providing and fixing PVC pipes including fixing the pipe with clamps/ clips/ at 1.00 m spacing . This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 110 mm dia 6 Kgf/cm2 - External work- Exposed on wall

50.18.9.21 : Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 75 mm dia Elbow

50.18.9.21.2 : Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including jointing with PVC solvent cement -75 mm dia 45 degree Elbow

50.18.9.21.3 : Providing and fixing PVC moulded fittings / accessories for Rigid PVC pipes, including jointing with PVC solvent cement -75 mm dia Door Elbow

50.18.9.21.4 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 75 mm dia Bend

50.18.9.21.5 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement -75x75x75 mm dia Tee

50.18.9.21.6 : Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 75x75x75 mm dia Door Tee

50.18.9.21.7 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 75 mm dia Vent cowl

50.18.9.21.8 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement -75 mm dia End cap

50.18.9.21.9 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 75 mm dia Socket /coupling

50.18.9.21.10 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement -75x63 mm dia Reducer

50.18.9.22.1 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110 mm dia Elbow

50.18.9.22.2 : Providing and fixing PVC moulded fittings / accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110 mm dia 45 degree Elbow

50.18.9.22.3 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement-110 mm dia Door Elbow

50.18.9.22.4 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement- 110 mm dia Bend

50.18.9.22.5 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes including jointing with PVC solvent cement 110x110x110 mm dia Tee

50.18.9.22.6 : Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110x110x110 mm dia Door tee

50.18.9.22.7 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110x110x75 mm dia Door Tee

50.18.9.22.8 : Providing and fixing PVC moulded fittings /accessories for Rigid PVC pipes, including jointing with PVC solvent cement -110 mm dia Vent cowl

50.18.9.22.9 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement -110 mm dia offset

50.18.9.22.10 : Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including jointing with PVC solvent cement -110 mm dia End Cap

50.18.9.22.11 : Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes,including jointing with PVC solvent cement - 110 mm dia Socket/ coupling

50.18.9.22.12 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110x75 mm dia Reducer

od181858/2024_2025 : Design, Supply and installation of Aluminium profile sliding door signage with the following specifications. The signage shall have an aluminium profile modular frame of height 100mm. The letters shall be plotter cut 2 mil pigmented translucent vinyl of approved design pasted on 3mm thick foam board/ ACP Board fixed with adequate fasteners. The signage shall be in such a way that the foam board/ACP Board is slide to the aluminium profile for easy replacement of names : size-300mmx100mm

od181859/2024_2025 : Design, Supply and installation of vinyl signage on ACP with the following specifications. The signages shall be plotter cut 2 mil pigmented translucent vinyl of approved design pasted on 3mm thick foam board and installed on 3mm thick ACP backing using VHB tapes.ACP backing surrounded by 50mm dia 1mm thick ss plated tube along the perimeter supported by 2 nos of 50mm dia 2mm thick ss plated pole permanently fixed at ground by concrete or can be fixed on wall support as per directions by engineer in charge.- ACP board size (2400x1200) bottom fixed at 60cm from ground as per the directions of engineer in charge.

od181860/2024_2025 : Design, Supply and installation of vinyl signage on ACP with the following specifications. The signages shall be plotter cut 2 mil pigmented translucent vinyl of approved design pasted on 3mm thick foam board and installed on 3mm thick ACP backing using VHB tapes.ACP board size (2400x1200) bottom fixed at 60cm from ground as per the directions of engineer in charge.

od181861/2024_2025 : Design, Supply and installation of Reception/helpdesk signages as per following specifications. The signages shall be plotter cut 2 mil pigmented translucent vinyl pasted on3mm thick ACP/ 6mm thick hybrid board or 8mm Thick Acrylic glass on single side of approved make and colour of height 150mm. The signage shall be ceiling suspended using Stainless Steel strings as per the directions of engineer in charge, TEXT (MAY I HELP YOU, CASH, RECEPTION , REGISTRATION, INSURANCE..etc..)

od181862/2024_2025 : Supply and installation of way finding signages as per following specifications. The signages shall be plotter cut 2 mil pigmented translucent vinyl pasted on 3mm thick ACP/ 6mm thick hybrid board on both sides of approved make and colour.The signage shall be ceiling suspended using Stainless Steel strings as per the directions of engineer in charge. Way Finding Signage: 1200mmx600mm

od181863/2024_2025 : Design,Supply and installation of circular door signage for number with the following specification. The signages shall be plotter cut 2 mil pigmented translucent vinyl of approved design pasted on 3mm thick foam board and installed on doors using VHB tapes : size of signage- 100mm dia

od181864/2024_2025 : Supply and installation of door signage with the following specification. The signages shall be plotter cut 2 mil pigmented translucent vinyl of approved design pasted on 3mm thick sunboard and installed on doors using VHB tapes: Door Signage: 300mmx100mm

od181865/2024_2025 : Supply and installation of signage board with the following specification. The signages shall be plotter cut 2 mil pigmented translucent vinyl of approved design pasted on 3mm thick sunboard and installed above doors using VHB tapes : Signage size: 1200mmx150mm

od181866/2024_2025 : Design,Supply and installation of Vinyl printed signage for awareness and guidelines for hospital departments as specified by the client with the following specification. The signages shall be plotter cut 2 mil pigmented translucent vinyl of approved design pasted on 3mm thick foam board and installed on wall/glass using VHB tapes.Room vinyl printed sticker with 3mm foam board backing as per the directions of engineer in charge.

od181867/2024_2025 : Supply and installation of 3 mm Acrylic box letters with 70 mm projection, vinyl pasted on first face with 3 module LEDs, SMPS and other electrical fittings fixing on ACP/wall base as per the directions of client/engineer in charge.

od181869/2024_2025 : Design,Supply and installation of Vinyl printed self adhesive sticker signage on glass for awareness and guidelines. with the following specification. The signages shall be plotter cut 2 mil pigmented translucent vinyl of approved design pasted on glass.

od181870/2024_2025 : Providing and fixing of 3mm thick ACP/ 6mm thick hybrid board or 8mm Thick Acrylic glass backing for singnage. Shall be fixed by means of ss studds or screwed as per directions of engineer in charge the price shall be inclusive of all hardwares and accesories used for fixing as per the directions of engineer in charge.

od181871/2024_2025 : Supply and installation of 8mm thick Glass marker board with led lights (900X900)mm on wall as per directions by engineer in charge.

od181874/2024_2025 : Design, Supply and installation of SS signage on ACP with the following specifications. The letters shall be made out of 40mm projected ss plated box signage with 3mm ACP/ Aluminium sheet backing ALONG WITH LED borders supported by 2 nos of 75mm dia 2mm thick GI painted pole permanently fixed at ground by concrete .

od190317/2024_2025 : Providing and laying 100 mm thick factory made cement concrete interlocking paver block of M -40 grade made by block making machine with strong vibratory compaction, of approved size, design shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge

od190318/2024_2025 : Providing and laying factory made chamfered edge Cement Concrete paver blocksin footpath, parks, lawns, drive ways or road and parking etc, of required strength,thickness size/ shape, made by table vibratory method using PU mould, laid inrequired colour pattern over 50mm thick compacted bed of sand, compacting andproper embedding/laying of inter locking paver blocks into the sand bedding layerthrough vibratory compaction by using plate vibrator, filling the joints with sand andcutting of paver blocks as per required size and pattern, finishing and sweepingextra sand. complete all as per direction of Engineer-in-Charge.80 mm thick C.C. paver block of M-40 grade with approved color design and pattern.

od190319/2024_2025 : Extra for shuttering in circular work

od218910/2024_2025 : OT DOOR ( AUTOMATIC)Track : High grade aluminum extrusion profile to carry any door weight (till size 3000mm X 2400mm) with deep indentations to ensure perfect hermetic sealing Canopy : For HPCL Door:- Powder coated galvanized sheet over the full length of track with sloping top and closing caps.Door Blade : Door core of 60mm thick built up with:- Door Profile : Door core is surrounded by 2.5 mm thick high grade aluminum extrusion profiles with natural anodizing of 15 microns finish. The aero-dynamic design of profiles makes the door ROBUST in its segment league. Gaskets : Door blade is made with 3-tier specially designed 3 side heavy duty replaceable EPDM gasket against wall frame. Bottom sealing with 2-tier heavy duty EPDM gasket to flush with finished floor.Opener : Stainless Steel INDEMAND lever handle on both side of the door blade for smooth and easy door opening and closing OR for small door outside D-grip handle and inside flush grip. Wall Frame : High grade Aluminum extrusion with natural anodized 15 micron finish wall frame profile. This wall frame profile is 3-sided blind fixed with cladding on wall cut-out section from inside and outside of the room. Cladding : The cut-out of wall section is covered with 1mm thick high pressure laminate glued on 9mm high density particle board.Acoustic : Sound reducing door up to 28db.Operation : Door can be open/close manually or with automation.Weight : Complete door blade weight is 125 Kg approx and track assembly is 20 Kg. Sliding : Door can be open to Right Hand Slide OR Left Hand Slide.Suitable For : Operation Theaters, Intensive Care Units (ICU), Laboratories, Sterile Rooms,Pediatric Wards, Quarantine Areas and Lobbies etc. Supply and installation of Ceiling/corner paneling system: 0.8 mm thick 304 graded Stainless sandwich panel with core consisting of rigid polyurethine foam which has been injected under hipressure with a minimum density of 40 kg/m3. Total insulated panel thickness with stainless steel sheet should be 30 - 40 mm.The gap between panel should be filled with filler material and finished to fine grade surface and finished with anti fungal medical grade paint. Suspension/fixation system (brackets and threaded rods) as per manufacturer recommendation shall be used. Sub structure materials should be galvanised steel as per standards. All necessary fittings should be integrated with panels. Rate shall be all inclusive of labour, materials etc.

od218911/2024_2025 : Solid block masonry using pre cast solid blocks (Factory made) of size 40x10x20 cm or nearest available size confirming to IS 2185 part I of 1979 for super structure above floor two level up to terrace floor level for 10 cm thick wall in : CM 1:6 ( 1 cement : 6 coarse sand) including cost of labour, scaffolding work etc. complete

od218912/2024_2025 : Providing and laying Antiskid Ceramic floor tiles 300x300x7 mm of Ist quality conforming to IS : 15622 of approved make,shade,and pattern laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) and jointed with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc.including cost and conveyance of all materials,labour charges,lead,lift etc, complete as directed by the Engineer-in-Charge at all levels.

od218913/2024_2025 : WALL VINYL : Providing and Fixing 1mm thick Homogeneous Wall Vinyl covering with polyurethane protective surface having antifungal and anti bacterial properties in accordance with ISO 22196, of approved color and complying to color fastness as per ISO 105-B02, size and texture to the proper level, line using adhesive as per manufacturers specification, joint treatment, welding etc complete as directed by the Engineer -in-Charge at all levels. The joints shall be welded properly with the same color welding cord.

od218914/2024_2025 : Providing laying 2mm thick polyurethene reinforced laminated antistatic, antifungal, antibacterial vinyl flooring and skirting, including self levelling upto 3mm thick with cementitious material ,flexibility less than 20mm, residual indentation less than 0.1 mm electrical behaviour less than 2kV, of approved colour, size and texture over the floor surface to proper level, line using adhesives as per manufacturerapos;s specification including joint treatment, coving cum pvc capping, welding etc complete as directed by the Engineer-in- Charge at all levels.The rate is inclusive of cost of all materials,upto 3 mm thick self levelling, welding all joints, labour, lead, lift etc. complete as directed by the Engineer-in-Charge at all levels

od218915/2024_2025 : Wall painting with water based PU paint having antibacterial and antifungal properties of approved brand and manufacture to give an even shade including epoxy priming coat : Two or more coats on new work

od218916/2024_2025 : Supply installation and fixing of GI Casing using 0.8 mm thick sheets by welding confirming to IS 277:1992 as per directions of engineer in charge at all heights inclusive of labour, materials etc.

od218917/2024_2025 : Providing and fixing Powder coated Aluminium (minimum thickness of powder coating 50 micrones) locking arrangement for sliding windows including necessary screws and fittings of approved make as directed by the engineer in charge.

od218918/2024_2025 : Providing and fixing 100 mm size patch lock ( best make of approved quality ) with Euro cylinder for glazed doors including necessary cutting and making good etc. complete

od218919/2024_2025 : Supply and installation of Ceiling/corner paneling system: 0.8 mm thick 304 graded Stainless sandwich panel with core consisting of rigid polyurethane foam which has been injected under hipressure with a minimum density of 40 kg/m3. Total insulated panel thickness with stainless steel sheet should be 30 - 40 mm.The gap between panel should be filled with filler material and finished to fine grade surface and finished with anti fungal medical grade paint. Suspension/fixation system (brackets and threaded rods) as per manufacturer recommendation shall be used. Sub structure materials should be galvanized steel as per standards. All necessary fittings should be integrated with panels. Rate shall be all inclusive of labour, materials etc.

od218920/2024_2025 : Providing and fixing powder coated Aluminium louvered Ventilators (minimum thickness of powder coating 50 microns) of approved colour HINDALCO or equivalent 9771, with 5mm thick frosted glass of approved make for aluminium U channel louvers including necessary grooves in frames for fixing glass etc. complete. Providing and fixing powder coated Aluminium louvered Ventilators (minimum thickness of powder coating 50 microns) of approved colour HINDALCO or equivalent 9771, with 5mm thick frosted glass of approved make for aluminium U channel louvers including necessary grooves in frames for fixing glass etc. complete.

od218921/2024_2025 : Provided and fixing dusted/frosted glass film of make 3M/Avery Dennison orequivalent of approved shade (overall thickness of Film + Adhesive shall be approx. 120 microns) on glasswith customized prints with HP latex based high quality prints. The film shall install with self-adhesiveand bubble-free installation to be done on clean glass .The rate shall include the cost and conveyance ofall materials, labour charges, scaffolding, lead ,lift, sundries, print, wastage ,design, operations etc completeas directed by the Engineer in charge at all levels.

od218922/2024_2025 : Providing, assembling and supplying toughened glass of 8mm thickness vision panel units of size and shape as required and specified, of approved colour and shade with spacer tube 12mm wide, desiccants, including primary seal and secondary seal (structural silicone sealant) etc. all complete for the required performances, as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer-in-Charge. (Payment for fixing of glass Panels in the curtain glazing is included in cost of item No.25.2) For payment, only the actual area of glass on face # 1 of the glass panels (excluding the areas of the grooves and weather silicone sealant) provided and fixed in position, shall be measured in sqm.(i) Coloured tinted performance glass of 8mm thick of approved make having properties as visible Light transmittance (VLT) of 25 to 65 %, Light reflection internal 10 to 20%, light reflection external 10 to 20 %, shading coefficient (0.25-0.28) and U value of 3.0 to 6 W/m2 degree K etc complete.

od218923/2024_2025 : Providing and fixing 12mm thick toughened glass partition for fixed portion with necessary fittings, including all cost of materials and labour charges etc. complete.

od218924/2024_2025 : Chipping of existing pile to the cut off level by manually/ by mechanical means including disposal of unserviceable material within site premises lead as per direction of Engineer - in- charge.

od218927/2024_2025 : Providing and fixing hardwares for Handicaped door(Excluding door frame and panel).The shutter to be provided with cylindrical knob lock with rose diameter 75 mm and SS matt finished kick plate of dimension 300 MM X 1050 MM X 1MM including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing etc. complete as directed by the Engineer-in-Charge at all levels:

od218928/2024_2025 : Providing and fixing stainless steel TGD handles 32x600 mm as per drawings and specifications and as per direction of Engineer-in-Charge.

od218929/2024_2025 : Providing and fixing Stainless Steel- D- type handle - 450mm height of approved make for glass doors with necessary accessories and screws etc. complete

od218930/2024_2025 : Supplying and fixing keyless baby latch of approved make including cost and conveyance of all materials and labour etc complete.

od218931/2024_2025 : Supply and fixing SS 304Grade angle of size 50x50x1mm thick as corner guard for wall tiles

od218932/2024_2025 : Providing and fixing Lead Shielding Door shutter and frame: of (2 Hrs Fire Rated)Door frame shall be double rebate profile of size 143 x 58 mm made out of 1.6 mm (16 gauge) thick galvanized steel sheet. Frames shall be butted and field assembled with bolts. The inside face of the frame face trim to rebate height should be protected with 2.0 mm thick lead line. All provision should be mortised, drilled and tapped for receiving appropriate hardware. Rubber door silencers should be provided on the strike jamb. Frames should be provided with back plate bracket and anchor fasteners for installation on a finished plastered masonry wall opening. Frame should be Rockwool infill.Door leaf shall be minimum 46 mm thick fully flush double skin door. Door leaf shall be manufactured from 1.2 mm (18 gauge) thick galvanized steel sheet. The internal construction of the door should be rigid with lead line of 1.6 mm thick all across the inside of the exposed surface. In addition, the door should have steel channel reinforcement with a basic infill of honeycomb core. All doors should be factory prepped for receiving appropriate heavy duty hardware and provided with necessary reinforcement for hinges, locks, and door closers as per ANSI Standard

od218933/2024_2025 : Supplying, fabricating and fixing 4mm ACP duct door with approved aluminium sections as frames, including all fittings (2nos of SS hinges of size 100mm alen key lock) including cost and conveyence of all materials and labour etc all complete.

od219178/2024_2025 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work at all floor levels:1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size)

od219188/2024_2025 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work at all floor levels:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

od220907/2024_2025 : Supply, installation , testing and commissioning of 300 LPD Solar Water heater with hot water pump, backup heaters, sensers, temperature controlers and heat pump as backup.

od220908/2024_2025 : Providing fixing of Manually Operated No fuel type Incinerator of capacity 20-30 KG/Hour (200-300 /KG/Day) No Fuel Type General Waste Management Equipment with size of equipment chamber: 32 Inch DIA 60 Inch Height. Size of burning Chamber: Inner Size of the burning chamber of the equipment is 24 Inch DIA 34 Inch height ( volume:252 liter) , Size of ash collecting chamber Inner size of the ash collecting chamber of the equipment is 30 Inch DIA 10 Inch HEIGHT. Outer lining: The outer lining of the waste management equipment is made with 2.5 mm thick MILD STEEL SHEET. Inner lining: The inner lining of the waste management equipment is made with IS 8 Grade fire bricks of 4 inch thickness. This equipment is made with high quality graded materials, for the construction, high temperature FIRE BRICKS of grade IS 8 with 4 Inch thickness, Thermo Crete super calderys, Fire clay of Grade IS 8, M S Bar Grates of thickness &frac12; Inch, Top Plate of thickness of 6mm, MS SHEET of thickness 2.5 mm, Stainless steel (SS) pipe as its chimney, MS Angle, MS Flats etc complete including required foundation for fixing the equipment.

od220909/2024_2025 : Design, Supply, Installation, Testing and Commissioning of 200 KLD Sewage Treatment Plant Based on MBR Technology including all the mechanical and electrical equipments like approved pumps, MBR membranes, filters, dosing system etc complete for the full function of Sewage Treatment Plant. The civil foundations and RCC tank structures / pump rooms shall not be included in this item and shall be paid separately. Design of the MBR system shall be done as per site conditions and got approval from the Engineer in charge before procurement. Work shall be done as per Kerala PCB norms, manufacturer recommendation, technical specification and as directed by engineer in charge -200 KLD STP

od220910/2024_2025 : Supply, instalation, tesing and commissioning of high efficiency centrifugal type 2Nos 7.5 HP pump with IP 67 duty motor, necessary valves, contol panel consisting of 1 No 63 A MCCCB as incoming and 2Nos 32A MCB MPCB as outgoing, cabling etc complete.

od220911/2024_2025 : Providing, installing, testing and commissioning of approved make Water level Control instrument.

od220912/2024_2025 : BOOSTER PUMP SETS: Supply, storage, installation, testing commissioning of VFD operated Vertical multi stage Water boosting pump system ,with pumps (2 nos on a 1duty + 1 standby basis) with control panel,pressure vessel, automatic changover switch, VFD control panel with all necessary valves, strainer, flexible connections, pressure gauges, supports, fixings and fittings electrical/ control panels, power and control cabling , cable trays etc as specified and as shown on drawings and complying to relevant standards. COLD WATER BOOSTING PUMP: Duty conditions:-2.00 LPS @ 15 M Head (One Duty +One Assist+ One standby) (BWSP-01~02) With pressure vessel

od220913/2024_2025 : Supplying,Installing, testing and commissioning approved make Raw water Pressure sand filter with necessary accessories complete with Frontal piping,valves,suitable supports for mounting pressure guages,orifice plates.The filter shall be made of MS vessel with necessary protective coating.The cost of filter shall also include initial charge of underbed multi-grade filter media to suit the requirement etc.,complete as per the standards. Max. working pressure = 3.5kg/sqcm. Max flow rate = 11.5 cum/hr,at 10 hrs cycle

od220914/2024_2025 : Supplying, installing, testing and commissioning approved make Water Softener with necessary Accessories complete with Frontal piping,valves,suitable supports for mounting pressure gauges, orifice plates.The softener shall be made of MS vessel with necessary protective coating.The cost of Softener shall also include initial charge of Resin media to suit the requirement etc.,complete as per standards. Max. working pressure = 3.5kg/sqcm. Max flow rate = 11.5 cum/hr,at 10 hrs cycle

od220915/2024_2025 : Supplying, installing, testing and commissioning approved make activated carbon filter in MS vessel construction with internals, electrical control system complete with Frontal piping, valves, suitable supports for mounting, pressure guage, orifice plate etc.., complete as per the detailed specification for the efficient working of system. The maximum working Pressure shall be 3.5 Kg/Sqcm. Max flow rate = 7.0 cum/hr,at 10 hrs cycle

od220919/2024_2025 : RO WATER BOOSTING PUMP: Duty conditions:-1.75 LPS @ 45 M Head (One Duty + One standby) (BWROP-01/02) With pressure vessel

od220920/2024_2025 : Supplying, fixing, testing and commissioning pump set (horizontal or vertical type) of adequate HP capable of giving a required discharge at suitable head to work on 3Ph. 50Hz, 400/440 V with necessary unions, flanges, foundation bolts, etc., complete. Make: Grundfos/ Lubi/ Shakti Approved Equivalent Duty : Domestic Water Distribution

od220921/2024_2025 : RE-CIRCULATION PUMP SETS: Supply, storage, installation, testing commissioning of Horizontal multi stage Water re-circulation pump system ,with pumps (2 nos on a 1duty + 1 standby basis) with control panel, automatic changover switch, control panel with all necessary valves, strainer, flexible connections, pressure gauges, supports, fixings and fittings electrical/ control panels, power and control cabling , cable trays etc as specified and as shown on drawings and complying to relevant standards. RO WATER RE-CIRCULATION PUMP- Duty conditions:- 1.75 LPS @ 40 M Head (One Duty + One standby) (RCP-01/02)

od220922/2024_2025 : Providing and fixing automatic level controller with panel, control cabling,cabling, Automatic OHT Level Control system Consists of Water Level Float Switch with control Cable for water supply ,including all accessories, which required to complete the system for working conditions as per specifications.

od220923/2024_2025 : Supply, installation, testing and commissioning of fullway lever operated forged brass ball valves with brass body with necessary MTA fittings with all supports and fixings all as specified and as shown on drawings and complying to relevant standards - 20 mm dia

od220924/2024_2025 : Supply, installation, testing and commissioning of fullway lever operated forged brass ball valves with brass body with necessary MTA fittings with all supports and fixings all as specified and as shown on drawings and complying to relevant standards - 25 mm dia

od220925/2024_2025 : Supply, installation, testing and commissioning of fullway lever operated forged brass ball valves with brass body with necessary MTA fittings with all supports and fixings all as specified and as shown on drawings and complying to relevant standards - 32 mm dia

od220926/2024_2025 : Supply, installation, testing and commissioning of fullway lever operated forged brass ball valves with brass body with necessary MTA fittings with all supports and fixings all as specified and as shown on drawings and complying to relevant standards - 40 mm dia

od220927/2024_2025 : Supply, installation, testing and commissioning of fullway lever operated forged brass ball valves with brass body with necessary MTA fittings with all supports and fixings all as specified and as shown on drawings and complying to relevant standards - 50 mm dia

od220928/2024_2025 : Structural steel work in chequered plate 8mm thick outside staircase steps fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

od220929/2024_2025 : Supply, installation, testing and commissioning of fullway lever operated forged brass ball valves with brass body with necessary MTA fittings with all supports and fixings all as specified and as shown on drawings and complying to relevant standards - 65 mm dia

od220930/2024_2025 : Supply, installation, testing and commissioning of fullway lever operated forged brass ball valves with brass body with necessary MTA fittings with all supports and fixings all as specified and as shown on drawings and complying to relevant standards - 80 mm dia

od220931/2024_2025 : Supplying and fixing CI manhole cover of size 600x600mm heavy duty (110kg) of approved make as per the directions of Engineer in charge

od220932/2024_2025 : Supply, installation, testing and commissioning of fullway lever operated forged brass ball valves with brass body with necessary MTA fittings with all supports and fixings all as specified and as shown on drawings and complying to relevant standards - 100 mm dia

od220933/2024_2025 : Supply installation of urinal with push type auto close Stop Cock of approved make : Urinal of size 280 x 335 x 465mm with standard flush pipe and C.P. brass spreaders with brass unions and G.I. clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required

od220934/2024_2025 : Providing and fixing CP Brass sink cock of approved quality conforming to IS 8931, as approved by the engineer in charge at all levels.The flow-rates of sink cock shall be 4 LPM.

od220935/2024_2025 : Supply, installation, testing and commissioning of fullway lever operated forged brass ball valves with brass body with necessary MTA fittings with all supports and fixings all as specified and as shown on drawings and complying to relevant standards - 150 mm dia

od220936/2024_2025 : Providing and fixing premium quality C.P. brass wall shower mixer along with overhead shower and shower arm with wall flanges of approved make and model including cost of all materials, labour etc., complete as directed by the Engineer-in-;Charge at;all levels. The flow-rates of Shower Head shall be 6-8 LPM .

od220937/2024_2025 : Supply, installation, testing and commissioning of spring loaded brass check valve(PN-16) with forged brass body, forged brass disc, with screwed end fittings with all supports and fixings all as specified and as shown on drawings and complying to relevant standards - 50 mm dia

od220938/2024_2025 : Supply Installation of Elbow operated CP long body Bib Cock of approved make

od220939/2024_2025 : Supply, installation, testing and commissioning of spring loaded brass check valve(PN-16) with forged brass body, forged brass disc, with screwed end fittings with all supports and fixings all as specified and as shown on drawings and complying to relevant standards - 65 mm dia

od220940/2024_2025 : Providing and fixing CP brass towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality, 600 mm long towel rail of approved make

od220941/2024_2025 : Supply, installation, testing and commissioning of spring loaded, vertical mounted brass air release valve with forged brass body, forged brass chamber, with screwed end fittings with all supports and fixings all as specified and as shown on drawings and complying to relevant standards - 20 mm dia

od220942/2024_2025 : Supply, installation, testing and commissioning of high pressure float valve with bronze construction, copper floats, with screwed end fittings with all supports and fixings all as specified and as shown on drawings and complying to relevant standards - 32mm dia

od220943/2024_2025 : Supply, installation, testing and commissioning of high pressure float valve with bronze construction, copper floats, with screwed end fittings with all supports and fixings all as specified and as shown on drawings and complying to relevant standards - 50mm dia

od220944/2024_2025 : Supply, installation, testing and commissioning of high pressure float valve with bronze construction, copper floats, with screwed end fittings with all supports and fixings all as specified and as shown on drawings and complying to relevant standards - 80mm dia

od220945/2024_2025 : Supply, installation, testing and commissioning of brass Y-type strainer with screwed drainplug, SS 304 screen with supports, flanges, fixings and fittings all as specified and as shown on drawings and complying to relevant standards - 50 mm dia

od220946/2024_2025 : Supply, installation, testing and commissioning of brass Y-type strainer with screwed drainplug, SS 304 screen with supports, flanges, fixings and fittings all as specified and as shown on drawings and complying to relevant standards - 65 mm dia

od220947/2024_2025 : PUDDLE FLANGE: Supply, installation, testing commissioning of uPVC puddle flanges in the water tanks with necessary fittings in accordance with the drawingsand relevant standerds - 50 mm dia

od220948/2024_2025 : Supply, installation, testing commissioning of uPVC puddle flanges in the water tanks with necessary fittings in accordance with the drawingsand relevant standerds - 65 mm dia

od220949/2024_2025 : Supply, installation, testing commissioning of uPVC puddle flanges in the water tanks with necessary fittings in accordance with the drawingsand relevant standerds - 100 mm dia

od220950/2024_2025 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 150x110 mm dia Reducer

od220951/2024_2025 : Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 150 mm dia Socket/ coupling

od220952/2024_2025 : Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling testing of joints complete as per direction of Engineer in Charge. 50 mm dia 10Kgf/cm2

od220953/2024_2025 : Providing and fixing PVC moulded fittings / accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 150 mm dia 45 degree Elbow

od220954/2024_2025 : Providing, Fixing, custom built (prefabricated) PVC floor sumps / floor traps fabricated out of 110mm dia 6kg Class PVC pipes with inlet and outlet from 40mm upto 75mm, including providing water seal, fixing to a perfect level, laying cement concrete in 1:3:6 mix using 20mm size coarse graded aggregate, providing 150x150 mm size C.P / PVC Symet colour grating with frame alround , at 4mm below finished floor level making holes in masonry or concrete cutting surfaces, conveying all dismantled portions and clearing the site, making leak proof joints and tesing etc, complete and as directed.

od220955/2024_2025 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 150 mm dia Bend

od220956/2024_2025 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 150 mm dia Elbow

od220957/2024_2025 : Providing and fixing CP brass butterfly valve with cpvc flange of approved quality, High or low pressure complete:80mm

od220959/2024_2025 : Providing and fixing coloured vitreous china under counter round wash basin 440 mm dia or nearest size of approved make including one CP brass pillar cock 15 mm NB including connecting pipes with all fittings 32 mm dia rubber plugs 32 mm dia CP brass waste coupling, 32 mm dia CP brass bottle trap, 15mm angle valve, etc. complete as directed by the Engineer-in-charge.

od220960/2024_2025 : Providing and fixing sanitary fixtures for handicapped toilet including one wash basin , one number pillar,cock with aerator and all other related fittings like CP brass bottle trap,CP brass angle valve, CP brass waste coupling, etc, one number EWC Cistern complete with fittings and seat cover, one no. hinged rail ,4 nos. of grab rails 60cm etc, designed for people with special needs comes with as per manufacturers specification including cutting and making good the walls and floors wherever required as directed by Engineer-in-Charge.Following flow-rates shall be adopted for fixtures.Water Closet (Full flush/ Half flush) = 4 / 2 LPF,Lavatory Faucet = 4 LPM .

od220961/2024_2025 : Supplying, fixing and testing salt glazed stoneware gully trap with rebated top square bodies 150mm x 150mm, CI grating 100mm dia outlet set in 75mm thick PCC 1:4:8 bed, 230mm thick masonry chamber in CM 1:3, internal and external plastering 12mm thick in CM 1:6 and 1:3 respectively, supply and fixing 450mm x 450mm size CI frame and cover, jointing to drain in CM 1:1, excavating, and cover, jointing to drain in CM 1:1, excavating, refilling and ramming etc., complete.

od220962/2024_2025 : Supply, installation , testing and commissioning of control panel with necessary switch gears, earthing, laying and termination of cables from control panel to motors/ bowel, control cabling, level switch and automatic stand by change over system etc complete

od220963/2024_2025 : Fixing, testing and commissioning of approved make vertical/horizontal type Electric water heater suitable for pressure rating up to 6Kg/sqcm with heating element with thermostat, 2 Nos. 15mm dia CP angle valve, pressure relief valve, non-return valve with CP copper connecting pipes with wall flanges etc., complete with all inlets, outlets, valves and all other accessories etc., complete. a) Capacity : 25 lts. 2 K.W heating element

od220964/2024_2025 : Supplying, Installing Testing at site in position CPVC Sch-80 of approved make for Pump room water supply, complete with all necessary Fittings (elbows, unions, tees, reducers, couplings, nipples etc.) complete with clamping in position with G.I. U bolts (8 mm thick) on G.I. slotted rails (1.6 mmthick) , Rail legs (2.5 mm thick) of approved make, as perdrawings to the satisfaction of the Project Manager.(For Pump room Piping) 75 mm nominal inner dia Pipes

od220965/2024_2025 : Construction of valve chamber with 230 mm best quality TM bricks in CM 1:4 over a bed of 100mm thick PCC 1:4:8, internal walls plastered smooth in CM 1:3 and external walls plastered rough with sponge finish including curing with all necessary leads and lift and providing heavy duty cast iron cover with frame with locking arrangements etc., complete including Heavy duty cast iron cover of size 600 x600 (weight 115Kgs.) Size of chambers for valves up to 150 mm dia Size 0.6m x 0.6m x 1M (clear dimension) including approved make cast brass body water meter with necessary unions for fixing on the inlet main as shown on the drawing, etc., complete with (of approved makes - analog type). 100mm nominal dia

od182517/2024_2025 : Supply, installation, testing commissioning of electric traction type elevator of following capacities and type suitable for operation on 415 V, 3 phase, 50 Hz AC supply, having AC variable voltage and variable frequency type traction control, machine room type, speed of 1.00 Mtr/sec, electromagnetic brake system, simple operations, operating control panel with luminous buttons, overload warning indicator, battery operated alarm bell, LED type emergency light, intercom suitable for hook up to EPABX, infrared ray sensing door protection for full height, reverse phase relay on controller, fireman&rsquo;s switch at ground floor, digital car positions indicator in car and at all positions indicator in car and at all floors with Up/DOWN direction, all signal fixtures in stainless stell faceplates, light fixtures, ventilation fan, etc complete with all accessories including automatic rescue device in the event of power failure etc., Complete with necessary scaffolding,, logic control panel and shaft lighting etc required for the erection of the elevators as required.Machine Room Type and elevator shall be of gearless type (suitable for lift well size 2150mm (D)X 2460m(W)) complete as per technical specification, simplex full collective operation with/without attendant. Car/Hoistway Entrance, protected by stainless steel hairline doors and clear center /side opening min 1000mm wide X 2000mm height. 15 passengers (Minimum) capacity (minimum 1020 Kgs) Bed Lift , car size of 1600mm wide x1500mm deep x 2200mm Height Inside dimensions and entrance at front side on all the serving floors, provided with matt finish stainless steel panel on all four side and ceiling, with rear side handrail as per specifications.4 stops 4 openings , Total travel height is approximately 15 M Fire Lift

od182518/2024_2025 : Supply, installation, testing commissioning of electric traction type elevator of following capacities and type suitable for operation on 415 V, 3 phase, 50 Hz AC supply, having AC variable voltage and variable frequency type traction control, machine room, speed of 1.00 Mtr/sec, electromagnetic brake system, simple operations, operating control panel with luminous buttons, overload warning indicator, battery operated alarm bell, LED type emergency light, intercom suitable for hook up to EPABX, infrared ray sensing door protection for full height, reverse phase relay on controller, fireman&rsquo;s switch at ground floor, digital car positions indicator in car and at all positions indicator in car and at all floors with Up/DOWN direction, all signal fixtures in stainless stell faceplates, light fixtures, ventilation fan, etc complete with all accessories including automatic rescue device in the event of power failure etc., Complete with necessary scaffolding,, logic control panel and shaft lighting etc required for the erection of the elevators as required.Machine RoomType with the traction motor placed on top of the hoistway and elevator shall be of gearless type (suitable for lift well size 3000mm (D)X 2400m(W)) complete as per technical specification, simplex full collective operation with/without attendant. Car/Hoistway Entrance, protected by stainless steel hairline doors and clear center /side opening min 1200mm wide X 2000mm height. 20 passengers (Minimum) capacity (minimum 1360 Kgs) Bed Lift,car size of 1300mm wide x2400mm deep x 2200mm Height Inside dimensions and entrance at front side on all the serving floors, provided with matt finish stainless steel panel on all four side and ceiling, stretcher protection on three sides completes as per specifications. 6 stops 6 openings, Total travel height is approximately 26 M Main lift

od182519/2024_2025 : Supply, installation, testing commissioning of electric traction type elevator of following capacities and type suitable for operation on 415 V, 3 phase, 50 Hz AC supply, having AC variable voltage and variable frequency type traction control, machine room, speed of 1.00 Mtr/sec, electromagnetic brake system, simple operations, operating control panel with luminous buttons, overload warning indicator, battery operated alarm bell, LED type emergency light, intercom suitable for hook up to EPABX, infrared ray sensing door protection for full height, reverse phase relay on controller, fireman&rsquo;s switch at ground floor, digital car positions indicator in car and at all positions indicator in car and at all floors with Up/DOWN direction, all signal fixtures in stainless stell faceplates, light fixtures, ventilation fan, etc complete with all accessories including automatic rescue device in the event of power failure etc., Complete with necessary scaffolding,, logic control panel and shaft lighting etc required for the erection of the elevators as required. Machine Room Type with the traction motor placed on top of the hoistway and elevator shall be of gearless type (suitable for lift well size 3000mm (D)X 2400m(W)) complete as per technical specification, simplex full collective operation with/without attendant. Car/Hoistway Entrance, protected by stainless steel hairline doors and clear center /side opening min 1200mm wide X 2000mm height. 20 passengers (Minimum) capacity (minimum 1360 Kgs) Bed Lift,car size of 1300mm wide x2400mm deep x 2200mm Height Inside dimensions and entrance at front side on all the serving floors, provided with matt finish stainless steel panel on all four side and ceiling, stretcher protection on three sides complete as per specifications. 7 stops 7 openings ,Total travel height is approximately 30 M Passenger/bed lift

od182520/2024_2025 : Supply, installation, testing commissioning of electric traction type elevator of following capacities and type suitable for operation on 415 V, 3 phase, 50 Hz AC supply, having AC variable voltage and variable frequency type traction control, machine room type, speed of 1.00 Mtr/sec, electromagnetic brake system, simple operations, operating control panel with luminous buttons, overload warning indicator, battery operated alarm bell, LED type emergency light, intercom suitable for hook up to EPABX, infrared ray sensing door protection for full height, reverse phase relay on controller, fireman&rsquo;s switch at ground floor, digital car positions indicator in car and at all positions indicator in car and at all floors with Up/DOWN direction, all signal fixtures in stainless stell faceplates, light fixtures, ventilation fan, etc complete with all accessories including automatic rescue device in the event of power failure etc., Complete with necessary scaffolding,, logic control panel and shaft lighting etc required for the erection of the elevators as required.Machine Room Type with the traction motor placed on top of the hoistway and elevator shall be of gearless type (suitable for lift well size 3000mm (D)X 2400m(W)) complete as per technical specification, simplex full collective operation with/without attendant. Car/Hoistway Entrance, protected by stainless steel hairline doors and clear center /side opening min 1200mm wide X 2000mm height. 20 passengers (Minimum) capacity (minimum 1360 Kgs) Bed Lift,car size of 1300mm wide x2400mm deep x 2200mm Height Inside dimensions and entrance at front side on all the serving floors, provided with matt finish stainless steel panel on all four side and ceiling, stretcher protection on three sides complete as per specifications. 3 stops 3openings ,Total travel height is approximately 14 M Fire Lift

od182521/2024_2025 : Supply, installation, testing commissioning of electric traction type elevator of following capacities and type suitable for operation on 415 V, 3 phase, 50 Hz AC supply, having AC variable voltage and variable frequency type traction control, machine room type, speed of 1.00 Mtr/sec, electromagnetic brake system, simple operations, operating control panel with luminous buttons, overload warning indicator, battery operated alarm bell, LED type emergency light, intercom suitable for hook up to EPABX, infrared ray sensing door protection for full height, reverse phase relay on controller, fireman&rsquo;s switch at ground floor, digital car positions indicator in car and at all positions indicator in car and at all floors with Up/DOWN direction, all signal fixtures in stainless stell faceplates, light fixtures, ventilation fan, etc complete with all accessories including automatic rescue device in the event of power failure etc., Complete with necessary scaffolding,, logic control panel and shaft lighting etc required for the erection of the elevators as required.Machine Room Type with the traction motor placed on top of the hoistway and elevator shall be of gearless type (suitable for lift well size 2140mm (W)X 1785mm(D) complete as per technical specification, simplex full collective operation with/without attendant. Car/Hoistway Entrance, protected by stainless steel hairline doors and clear center /side opening min 900mm wide X 2000mm height. 8passengers (Minimum) capacity (minimum 544 Kgs) passenger Lift,car size of 1100mm wide x1300mm deep x 2200mm Height Inside dimensions and entrance at front side on all the serving floors, provided with matt finish stainless steel panel on all four side and ceiling, rear side handrail sides complete as per specifications.7 stops 7 openings ,Total travel height is approximately 28 M service lift/dumb waiter

FIRE PIPING SYSTEM

UNDERGROUND PIPING (Including Wrapping and Coating)

od181641/2024_2025 : Providing of following sizes of GI C class pipes conforming to IS-1239 with all accessories like all fittings (standard GI fitting with welded joint shall be used on the pipes) including tees, elbows, reducers, union, flanges, rubber gaskets, GI nuts bolts, washer including supporting/fixing the pipe on floor / wall /ceiling with clamps, hangers (using anchor fastners) as per specification. MS pipe sleeve of suitable higher size shall be provided wherever the pipes are crossing the walls/floors and sealing the sleeves with glass wool in between fire sealent compound at either end all as per Project Manager&rsquo;s / Consultants.All hangers, clamps, brackets etc. shall be of galvanized iron unless specified otherwise and then supply of the same shall also be included for rates under this head.. i) Cutting,welding / flanged joints with necessary washers, nuts, bolts etc ii) Concrete anchor blocks at all change in direction of pipeline and also near each joints iii) Necessary masonry supports wherever required, .200 mm dia.

od181652/2024_2025 : Providing of following sizes of GI C class pipes conforming to IS-1239 with all accessories like all fittings (standard GI fitting with welded joint shall be used on the pipes) including tees, elbows, reducers, union, flanges, rubber gaskets, GI nuts bolts, washer including supporting/fixing the pipe on floor / wall /ceiling with clamps, hangers (using anchor fastners) as per specification. MS pipe sleeve of suitable higher size shall be provided wherever the pipes are crossing the walls/floors and sealing the sleeves with glass wool in between fire sealent compound at either end all as per Project Manager&rsquo;s / Consultants.All hangers, clamps, brackets etc. shall be of galvanized iron unless specified otherwise and then supply of the same shall also be included for rates under this head.. i) Cutting,welding / flanged joints with necessary washers, nuts, bolts etc ii) Concrete anchor blocks at all change in direction of pipeline and also near each joints iii) Necessary masonry supports wherever required, . 150 mm dia.

od181665/2024_2025 : Providing of following sizes of GI C class pipes conforming to IS-1239 with all accessories like all fittings (standard GI fitting with welded joint shall be used on the pipes) including tees, elbows, reducers, union, flanges, rubber gaskets, GI nuts bolts, washer including supporting/fixing the pipe on floor / wall /ceiling with clamps, hangers (using anchor fastners) as per specification. MS pipe sleeve of suitable higher size shall be provided wherever the pipes are crossing the walls/floors and sealing the sleeves with glass wool in between fire sealent compound at either end all as per Project Manager&rsquo;s / Consultants.All hangers, clamps, brackets etc. shall be of galvanized iron unless specified otherwise and then supply of the same shall also be included for rates under this head.. i) Cutting,welding / flanged joints with necessary washers, nuts, bolts etc ii) Concrete anchor blocks at all change in direction of pipeline and also near each joints iii) Necessary masonry supports wherever required, .100 mm dia

od181669/2024_2025 : Providing of following sizes of GI C class pipes conforming to IS-1239 with all accessories like all fittings (standard GI fitting with welded joint shall be used on the pipes) including tees, elbows, reducers, union, flanges, rubber gaskets, GI nuts bolts, washer including supporting/fixing the pipe on floor / wall /ceiling with clamps, hangers (using anchor fastners) as per specification. MS pipe sleeve of suitable higher size shall be provided wherever the pipes are crossing the walls/floors and sealing the sleeves with glass wool in between fire sealent compound at either end all as per Project Manager&rsquo;s / Consultants.All hangers, clamps, brackets etc. shall be of galvanized iron unless specified otherwise and then supply of the same shall also be included for rates under this head.. i) Cutting,welding / flanged joints with necessary washers, nuts, bolts etc ii) Concrete anchor blocks at all change in direction of pipeline and also near each joints iii) Necessary masonry supports wherever required, .80 mm dia

PIPING ABOVE GROUND

od181654/2024_2025 : Supply, fixing, testing and commissioning of following sizes of GI C class pipes conforming to IS-1239 with all accessories like all fittings (standard GI fitting with welded joint shall be used on the pipes) including tees, elbows, reducers, union, flanges, rubber gaskets, GI nuts bolts, washer including supporting/fixing the pipe on floor / wall /ceiling with clamps, hangers (using anchor fastners) as per specification. MS pipe sleeve of suitable higher size shall be provided wherever the pipes are crossing the walls/floors and sealing the sleeves with glass wool in between fire sealent compound at either end all as per Project Manager&rsquo;s / Consultants.All hangers, clamps, brackets etc. shall be of galvanized iron unless specified otherwire and then supply of the same shall also be included for rates under this head.200 mm dia

od181664/2024_2025 : Supply, fixing, testing and commissioning of following sizes of GI C class pipes conforming to IS-1239 with all accessories like all fittings (standard GI fitting with welded joint shall be used on the pipes) including tees, elbows, reducers, union, flanges, rubber gaskets, GI nuts bolts, washer including supporting/fixing the pipe on floor / wall /ceiling with clamps, hangers (using anchor fastners) as per specification. MS pipe sleeve of suitable higher size shall be provided wherever the pipes are crossing the walls/floors and sealing the sleeves with glass wool in between fire sealent compound at either end all as per Project Manager&rsquo;s / Consultants.All hangers, clamps, brackets etc. shall be of galvanized iron unless specified otherwire and then supply of the same shall also be included for rates under this head.150 mm dia

od181670/2024_2025 : Supply, fixing, testing and commissioning of following sizes of GI C class pipes conforming to IS-1239 with all accessories like all fittings (standard GI fitting with welded joint shall be used on the pipes) including tees, elbows, reducers, union, flanges, rubber gaskets, GI nuts bolts, washer including supporting/fixing the pipe on floor / wall /ceiling with clamps, hangers (using anchor fastners) as per specification. MS pipe sleeve of suitable higher size shall be provided wherever the pipes are crossing the walls/floors and sealing the sleeves with glass wool in between fire sealent compound at either end all as per Project Manager&rsquo;s / Consultants.All hangers, clamps, brackets etc. shall be of galvanized iron unless specified otherwire and then supply of the same shall also be included for rates under this head.100 mm dia

od181678/2024_2025 : Supply, fixing, testing and commissioning of following sizes of GI C class pipes conforming to IS-1239 with all accessories like all fittings (standard GI fitting with welded joint shall be used on the pipes) including tees, elbows, reducers, union, flanges, rubber gaskets, GI nuts bolts, washer including supporting/fixing the pipe on floor / wall /ceiling with clamps, hangers (using anchor fastners) as per specification. MS pipe sleeve of suitable higher size shall be provided wherever the pipes are crossing the walls/floors and sealing the sleeves with glass wool in between fire sealent compound at either end all as per Project Manager&rsquo;s / Consultants.All hangers, clamps, brackets etc. shall be of galvanized iron unless specified otherwire and then supply of the same shall also be included for rates under this head.80 mm dia.

od181700/2024_2025 : Supply, fixing, testing and commissioning of sight unit with bypass unit, flow switch, union, flange joint, Drain valve, Test valve,ball valve 50 mm dia, 50 mm dia interconnecting pipe, all of approved brand of manufacture. Flow swich connection shall be as per NBC PART - IV ( indicated in NBC).150 mm dia.

od181706/2024_2025 : Supply, fixing, testing and commissioning of sight unit with bypass unit, flow switch, union, flange joint, Drain valve, Test valve,ball valve 50 mm dia, 50 mm dia interconnecting pipe, all of approved brand of manufacture. Flow swich connection shall be as per NBC PART - IV ( indicated in NBC).100mm dia

od181711/2024_2025 : Supply, fixing, testing and commissioning of sight unit with bypass unit, flow switch, union, flange joint, Drain valve, Test valve,ball valve 50 mm dia, 50 mm dia interconnecting pipe, all of approved brand of manufacture. Flow swich connection shall be as per NBC PART - IV ( indicated in NBC).80mm dia

od181713/2024_2025 : Supply, installation, testing commissioning of sight galss unit of dia 25mm for test connection with all necessary fittings and accessories etc.,complete

od181717/2024_2025 : Supply, installation, testing commissioning of 150mm dia pressure gauge ( Glyserine Filled), siphon and cock burden type suitable for required pressure dial to be graduated both on PSI and Kg/Cm2 with all necessary jointing materials and fittings etc., complete

od181719/2024_2025 : Providing fixing of pressure switch in pipe line including connection etc. as required

od181724/2024_2025 : Providing fixing of flow switch on sprinkler distribution header on each floor and shall be connected to fire alarm panel through cable. Cable shall be measured separately, following sizes of fire pipe including connection etc. as required. 100mm diameter

od181725/2024_2025 : Providing fixing of flow switch on sprinkler distribution header on each floor and shall be connected to fire alarm panel through cable. Cable shall be measured separately, following sizes of fire pipe including connection etc. as required. 150mm diameter

od181728/2024_2025 : Providing, installation, testing commissioning of adjustable rosette plate for 15mm diameter, fabricated by M.S. plate of 2mm thick and the finish shall be powder coated in white finish UL Listed or FM approved complete as required

od181732/2024_2025 : Providing, Laying. Testing Commissioning of 450 mm dia RCC pipes of NP2 class with suitable collars filling the recess at joints of pipes with hemp dipped in hot bitumen or other suitable compound for chaulking of joint by jack, setting up of loose space over the collar joints chaulked with CM 1:2, finished both ends to a slope of 1:1 including curing, testing of pipes, etc., Complete all as specified and directed by Engineer in charge. Note: Earth work will be measured under relevent Items

od181734/2024_2025 : Supply, fixing, testing and commissioning of Test connection with 25mm dia GM ball valve Complete all as specified and directed by Engineer in charge.

Valves and Fittings

od181642/2024_2025 : Supply, fixing, testing and commissioning of following dia butterfly valves (PN 16) with insitu moulded seat of first quality, approved brand, confirming to relavent IS including vertical / horizontal gear unit with hand wheel, companion flanges, nuts, gaskets, bolts, etc. Complete all as specified and directed by Engineer incharge. 200 mm dia

od181651/2024_2025 : Supply, fixing, testing and commissioning of following dia butterfly valves (PN 16) with insitu moulded seat of first quality, approved brand, confirming to relavent IS including vertical / horizontal gear unit with hand wheel, companion flanges, nuts, gaskets, bolts, etc. Complete all as specified and directed by Engineer incharge.150 mm dia.

od181661/2024_2025 : Supply, fixing, testing and commissioning of following dia butterfly valves (PN 16) with insitu moulded seat of first quality, approved brand, confirming to relavent IS including vertical / horizontal gear unit with hand wheel, companion flanges, nuts, gaskets, bolts, etc. Complete all as specified and directed by Engineer incharge.100 mm dia

od181673/2024_2025 : Supply, fixing, testing and commissioning of following dia butterfly valves (PN 16) with insitu moulded seat of first quality, approved brand, confirming to relavent IS including vertical / horizontal gear unit with hand wheel, companion flanges, nuts, gaskets, bolts, etc. Complete all as specified and directed by Engineer incharge.80 mm dia

od181682/2024_2025 : Supply, fixing, testing and commissioning of following dia butterfly valves (PN 16) with insitu moulded seat of first quality, approved brand, confirming to relavent IS including vertical / horizontal gear unit with hand wheel, companion flanges, nuts, gaskets, bolts, etc. Complete all as specified and directed by Engineer incharge.65 mm dia

od181687/2024_2025 : Supply, fixing, testing and commissioning of following dia butterfly valves (PN 16) with insitu moulded seat of first quality, approved brand, confirming to relavent IS including vertical / horizontal gear unit with hand wheel, companion flanges, nuts, gaskets, bolts, etc. Complete all as specified and directed by Engineer incharge.50 mm dia

od181696/2024_2025 : Supplying, installing, testing and commissioning of C.I. Non-return valves as per IS:5312( PN 16) swing check type with required flanges, nuts, bolts 15mm thick compressed asbestos gasket including matching flanges complete ,GI bolts, nuts, washers etc.as required. 200 mm nominal diameter

od181699/2024_2025 : Supplying, installing, testing and commissioning of C.I. Non-return valves as per IS:5312( PN 16) swing check type with required flanges, nuts, bolts 15mm thick compressed asbestos gasket including matching flanges complete ,GI bolts, nuts, washers etc.as required. 150 mm nominal diameter

od181704/2024_2025 : Supplying, installing, testing and commissioning of C.I. Non-return valves as per IS:5312( PN 16) swing check type with required flanges, nuts, bolts 15mm thick compressed asbestos gasket including matching flanges complete ,GI bolts, nuts, washers etc.as required. 100 mm nominal diameter

od181709/2024_2025 : Supplying, installing, testing and commissioning of C.I. Non-return valves as per IS:5312( PN 16) swing check type with required flanges, nuts, bolts 15mm thick compressed asbestos gasket including matching flanges complete ,GI bolts, nuts, washers etc.as required. 80 mm nominal diameter

od181715/2024_2025 : Supplying, installing, testing and commissioning of C.I. Non-return valves as per IS:5312( PN 16) swing check type with required flanges, nuts, bolts 15mm thick compressed asbestos gasket including matching flanges complete ,GI bolts, nuts, washers etc.as required. 50 mm nominal diameter

od181718/2024_2025 : Supply, Fixing, Testing and commissioning of double flanged sluice valve of rating PN 16 as per IS:780 with non rising spindle type, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and confirming to IS 780 of following size 150 mm nominal diameter

od181720/2024_2025 : Supply, Fixing, Testing and commissioning of double flanged sluice valve of rating PN 16 as per IS:780 with non rising spindle type, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and confirming to IS 780 of following size 50 mm nominal diameter

od181722/2024_2025 : Supplying, installing, testing and commissioning of Gun metal chrome finished Ball valve with fittings of screwed end type.25 mm diameter

od181726/2024_2025 : Supplying, installing, testing and commissioning of Gun metal chrome finished Ball valve with fittings of screwed end type.50 mm diameter

od181727/2024_2025 : Providing fixing heavy forged brass tested ISI marked 2280 Lpm Flow Pressure Relief valves (16 Bar) of approved quality with all necessary Piping connections till the Bypass valve to Water Tank (To be installed in diesel pump Header in Pump Room)

od181731/2024_2025 : supply installation of UL listed pressure gauge 1/4 BSPT, minimum 3.5 dial of suitable range to be installed in pump room suction, discharge, diesel pump and Sprinkler Standpipe Systems. Dial type White background black graduation scale with dual reading in Kg./ Sq.cm and PSI complete as required.

od181735/2024_2025 : Supply, fixing, testing and commissioning of Providing, fixing, testing commissioning of Zone control valve of cast iron body,brass/bronze working parts comprising of water motor alarm, bronze seat clapper, clapper arm and hydraulically driven mechanical gong bell to sound continuous alarm when the wet riser/sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and bypass, test control box, ball valves, MS pipe of required size, flanges, orifice plate, gasket etc of follwing sizes as required.

od181736/2024_2025 : Supply, fixing, testing and commissioning of the SINGLE HEADED YARD HYDRANT (EXTERNAL) of first quality, approved brand, confirming to relavent IS composed of the following :-a) 80 mm dia GIF bend. b) 80 mm dia GIF stand pipe (1 Mtr above). c) 63 mm dia female instantenous pattern oblique hydrant valve chain and cap of Gun metal. The pipe portion below ground shall be painted with 3mm thick bituminous coat and pipe exposed outside shall be painted with 2 coats of synthetic enamel paint over a coat of primer. etc Complete all as specified and directed by Engineer incharge.

od181739/2024_2025 : Supply, fixing, testing and commissioning of the SINGLE HEADED YARD HYDRANT( INTERNAL ) with inbuilt PRV of first quality, approved brand, confirming to relavent IS composed of the following :-a) 80 mm dia GIF bend. b) 80 mm dia GIF stand pipe (1 Mtr above). c) 63 mm dia female instantenous pattern oblique hydrant valve chain and cap of Gun metal. The pipe shall be painted with 2 coats of synthetic enamel paint over a coat of primer. etc Complete all as specified and directed by Engineer incharge.

od181742/2024_2025 : Supply, installation, testing and commissioning of Y-Strainer PN-16 rating. Body: Cast Iron with Powder coating, Stainless Steel filter screen/mesh. The cost shall be inclusive of mating flanges of appropriate class, Asbestos free gasket, washers, nut and bolts etc. complete. 150mm dia.

od181743/2024_2025 : Supply, installation, testing and commissioning of Y-Strainer PN-16 rating. Body: Cast Iron with Powder coating, Stainless Steel filter screen/mesh. The cost shall be inclusive of mating flanges of appropriate class, Asbestos free gasket, washers, nut and bolts etc. complete. 200mm dia.

od181744/2024_2025 : Supplying fixing 63 mm diameter gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required :

od181745/2024_2025 : Supplying and fixing 63 mm diameter, 15 m long RRL hose pipe with 63 mm diameter male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required.

od181746/2024_2025 : Supply and fix external glass fronted hose cabinet glass fronted with hinged and lock, made out of 16 G M.S. sheet of suitable size with (3mm thick glass with rubber beeding) door and size of the cabinet shall be 750 mm x 600 mm x 250 mm powder coated paint complete all as specified and directed by Engineer incharge. With a) 2 lengths of 15 M long, 63mm dia RRL hose with instataneuos couplings and Hoses shall be stored in side the hose cabinet.b) Branch pipe nozzle (one set). c) Two keys of Recess type for break glass.

od181747/2024_2025 : Supplying, installing, testing and commissioning conventional Sprinkler quartzoid bulb type with 15mm screwed end connection of 68 deg. C. temperature rating,K 80 and orifice shall not be less than 6mm.Sprinklers shall be FM approved with Chrome finished. Pendent sprinkler

od181748/2024_2025 : Supplying, installing, testing and commissioning conventional Sprinkler quartzoid bulb type with 15mm screwed end connection of 68 deg. C. temperature rating,K 80 and orifice shall not be less than 6mm.Sprinklers shall be FM approved with Chrome finished. Upright

od181749/2024_2025 : Supplying, installing, testing and commissioning conventional Sprinkler quartzoid bulb type with 15mm screwed end connection of 68 deg. C. temperature rating,K 80 and orifice shall not be less than 6mm.Sprinklers shall be FM approved with Chrome finished. Side wall

od181750/2024_2025 : Supply, installation, testing commissioning of SS 25 mm dia Flexible braided hose suitable for sprinkler system, UL/ FM approved with all necessary fittings accessories, etc complete. Rate quoted shall also include for necessary clamps,/ fixing system for the braided hose.sprinkler flexible pipe (UL Listed) of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, center bracket, stockbar of following sizes complete as required.1 m length

od181751/2024_2025 : Supply, installation, testing commissioning of SS 25 mm dia Flexible braided hose suitable for sprinkler system, UL/ FM approved with all necessary fittings accessories, etc complete. Rate quoted shall also include for necessary clamps,/ fixing system for the braided hose.sprinkler flexible pipe (UL Listed) of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, center bracket, stockbar of following sizes complete as required 1.2 m length

od181752/2024_2025 : Supply, installation, testing commissioning of SS 25 mm dia Flexible braided hose suitable for sprinkler system, UL/ FM approved with all necessary fittings accessories, etc complete. Rate quoted shall also include for necessary clamps,/ fixing system for the braided hose.sprinkler flexible pipe (UL Listed) of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, center bracket, stockbar of following sizes complete as required 1.5 m length

Analogue Adressable Fire Alarm and Detection System

od181680/2024_2025 : Supplying, installation, testing commissioning of intelligent analog addressable photothermal detector complete with mounting base complete as required. (above false ceiling)

od181688/2024_2025 : Supplying, installation, testing commissioning of intelligent analog addressable photothermal detector complete with ounting base complete as required. (below false ceiling)

od181697/2024_2025 : Supplying, installation, testing commissioning of response indicator on surface/recessed MS Box having two LED, metallic cover complete with all connections etc as required.

od181703/2024_2025 : Supplying, installation, testing commissioning of intelligent addressable duct detector including suitable Photo detector complete with base as required.

od181707/2024_2025 : Analogue Addressable Monitor module for monitoring the field devices shall be capable of providing DPDTcontact rated at 24v DC, 2A. ( for flow switches)

od181710/2024_2025 : Analogue Addressable Control relay module for AHU tripping and shall be capable of providing DPDTcontact rated at 24v DC, 2A.

od181714/2024_2025 : Supplying and fixing of PC Pentium IV ,with 933 MHZ, 512 MB RAM,20 GB, HD, 17 monitor, 132 column colour dot matrix printer shall also be supplied.

od181716/2024_2025 : Supplying, installation, testing commissioning of addressable manual call point with break glass type complete as required.

od181721/2024_2025 : Supplying and fixing 25 mm dia MS flexible pipe with PVC (conduit) coating along with all ancillaries and accessories like coupler etc. as required. 25 mm dia. (for laying cables on stairs wall)

od181723/2024_2025 : Supplying, installation, testing commissioning of central graphical fire alarm management system to centrally monitor and operate the fire alarm system complete as required.

od181729/2024_2025 : Supplying, installation, testing commissioning of intelligent addressable thermal detector with rate of rise cum fixed tempreature thermistor complete with base as required.

od181730/2024_2025 : Supplying, installation, testing commissioning of fault isolator module complete with base as required.

od181733/2024_2025 : Supplying, installation, testing commissioning of addressable fire control module complete as required.

od181737/2024_2025 : Supplying, installation, testing commissioning of addressable horn cum strobe complete as required.

od181738/2024_2025 : Supplying laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring FRLS outer sheath complete as required.

TWOWAY TALK BACK (P.A.) SYSTEMS

od181647/2024_2025 : Supply and fixing of Talk back speaker unit 5W LMT, Press to talk switch MS housing with Red color.

od181656/2024_2025 : Supplying, installation, testing commissioning of 6 zone, voice alarm controller with USB, MP3 player (including 6 zone button paging station) with seamless integration facility with main fire alarm panel for voice evacuation complete as required. Panel should be with CRCA sheet housing, control desk( rack) and suitable rack for mounting amplifier console as required. Console shall have all call / call back facility complete with battery back up and it should also work on AC single phase power. PA console, amplifier and all associate accessories shall be installed in metal sheet fabricated cabinet.

od181660/2024_2025 : Supplying, installation, testing commissioning of Voice command keypad 6 zone, (two way talk back system for staircases) with microphone assembly complete as required.

od181675/2024_2025 : Supplying, installing, testing and commissioning solid state Amplifier of 480 W RMS out put in rack, including necessory control wires, jocks etc. complete.

od181684/2024_2025 : Supplying, installation, testing commissioning of 1.5/3/6W ceiling speaker complete as required.

od181698/2024_2025 : Supplying, installation, testing commissioning of 1.5/3/6W metal box ceiling/wall speakers complete as required.

FIRE EXTINGUISHERS SHALL BE PROVIDED AS PER NBC-IS 15683

od181644/2024_2025 : Supply and install in position approved make Dry Chemical Powder Fire Extinguisher 5/6 Kgs capacity (ABC Type) complete with chromium plated gun metal union (cap), fitted with braided hose and open nozzle with initial charge of Dry Chemical Powder and gas cartridge complete with bracket and fixing screws. The extinguisher is internally and externally coated with lead tin alloy through hot dip process and cylinder bearing No. IS:15683 and the gas cartridge bearing with ISI certitifcation mark. Complete all as specified and directed by Engineer in charge.

od181650/2024_2025 : Supply and install in position approved make carbon-di-oxide 4.5 Kgs capacity fire extinguisher, made of high pressure with wheel type valve with one metre long braided high pressure discharge hose which should have a minimum of bursting pressure of 14.0 N/Sqmm and fitted with ABS discharge born and handles (non-conductor), complete with bracket and steel handle on the body fully charged with ISI certification. mark, ISI:2878/1976. Complete all as specified and directed by Engineer in charge.

od181659/2024_2025 : Supply installation of 2 Nos.Fire buckets filled with sand round bottom type enamel painted, white inside Red out side and Letter FIRE in black out side and handle with mounting bracket as per the tender drawing. Along with Fabrication supply and installation of Fire bucket stand fabricated by MS angles/pipes to install 2 Nos. of buckets. Complete all as specified and directed by Engineer in charge.

od181672/2024_2025 : Supply and install in position approvedmake AFFF Mechanical Foam Fire Extinguisher, 9 Ltrs capacity fitted with chromium plated gun metal cap, plastic coated gas cartridge fitted with braided hose and foam branch complete with brackets and initial charge of Aqueous film forming liquid of 6% concentration as per IS:10204.

od181676/2024_2025 : Supply and install in position approvedmake AFFF Mechanical Foam Fire Extinguisher, 50 Ltrs capacity fitted with chromium plated gun metal cap, plastic coated gas cartridge fitted with braided hose and foam branch complete with brackets and initial charge of Aqueous film forming liquid of 6% concentration as per IS:10204.

od181689/2024_2025 : Supply and install in position approved make Dry Chemical Powder Fire Extinguisher 10 Kgs capacity (ABC Type) complete with chromium plated gun metal union (cap), fitted with braided hose and open nozzle with initial charge of Dry Chemical Powder and gas cartridge complete with bracket and fixing screws. The extinguisher is internally and externally coated with lead tin alloy through hot dip process and cylinder bearing No. IS:15683 and the gas cartridge bearing with ISI certitifcation mark. Complete all as specified and directed by Engineer in charge.

od181695/2024_2025 : Supply and install in position approved make Water Co2 Fire Extinguisher of 9 Ltrs capacity of conical shape fitted with chromium plated gun metal nozzle on the top end of the fire extinguisher for discharge of liquid and chromium plated gun metal union (Cap) at the bottom with angle fixed in the centre, complete with bracket, fixing screws, spanner and one filling. The extinguisher is internally and externally coated with lead, tin alloy through hot-dip process and bearing IS:15683 with ISI certification mark. Complete all as specified and directed by Engineer in charge.

FIRE SIGNAGES-Supply amp;amp; installation of Fire Exit SINAGES as per local statutory norms etc ,complete

od181645/2024_2025 : Fire Exit signage Dual Side above the door of each stair enclosure on every floor, indicating the direction of exit in case of fire emergency, lettering size shall be 5 cm with contrasting colour from back ground.Size shall be 6 x 12. Complete all as specified and directed by Engineer in charge.

od181657/2024_2025 : Providing and installing in position the following type of sign board made out of 3mm thick opaque& PVC foam board with computer cut, design, letters letters on both side with instructed letter dimensions and colour etc., PVC non-reflective vinyl painted foam board, complete with hanging chain/wall hangings, signage with required printed, Complete all as specified and directed by Engineer in charge.The size of the board shall be as follow and shall be fixed at any floor height.10 x 12

od181663/2024_2025 : Providing and installing in position the following type of sign board made out of 3mm thick opaque& PVC foam board with computer cut, design, letters letters on both side with instructed letter dimensions and colour etc., PVC non-reflective vinyl painted foam board, complete with hanging chain/wall hangings, signage with required printed, Complete all as specified and directed by Engineer in charge.The size of the board shall be as follow and shall be fixed at any floor height.15cmX50cm

od181671/2024_2025 : Providing and installing in position the following type of sign board made out of 3mm thick opaque& PVC foam board with computer cut, design, letters on both side with instructed letter dimensions and colour etc., PVC reflective vinyl painted foam board, complete with hanging chain, signage with required printed, Complete all as specified and directed by Engineer in charge.The size of the board shall be as follow and shall be fixed at any floor height.15cmX50cm

od181677/2024_2025 : Providing and installing in position the following type of sign board made out of 3mm thick opaque& PVC foam board with computer cut, design, letters on both side with instructed letter dimensions and colour etc., PVC reflective vinyl painted foam board, complete with hanging chain, signage with required printed, Complete all as specified and directed by Engineer in charge.The size of the board shall be as follow and shall be fixed at any floor height.2 x 3

od181690/2024_2025 : Fire Exit signage Single Side above the door of each stair enclosure on every floor, indicating the direction of exit in case of fire emergency, lettering size shall be 5 cm with contrasting colour from back ground.Size shall be 6 x 12. Complete all as specified and directed by Engineer in charge.

FIRE PUMP ROOM EQUIPMENT

od181648/2024_2025 : Supplying, erecting, testing and commissioning FIRE HYDRANT PUMPS DRIVEN BY DIESEL ENGINE as per the following: : a) Centrifugal fire hydrant pump of 2280 LPM, @ 88 M Head (8.8 Kg/Cm2) pressure capacity along with horizontal split cast iron casing type, bronze impeller, SS 410 Shaft, mechanical seal all as per specified and directed. b) Suitable HP, 1500 RPM automatic diesel engine driven pumpset ,DOL starter, along with residential silencer system,exhaust pipe with insulation cladding,exhaust pipe upto outside of building, fuel tank, necessary cooling system, with OS Y valve, NRV, Y stainer foundation bolts / Anti vibration pads, Pressure Guage, Pressure switch, test valve, day oil storage tank, two separate starting mechanism (automatic starting by battery power electric starting motor as well as manual starting motor all as per the specified and directed.

od181655/2024_2025 : Supply, erection, testing and commissioning of vertical inline 180 LPM, @ 88 M Head (8.8 Kg/Cm2) pressure capacity Centrifugal Jockey pump coupled with suitable eletrical driven motor, necessary foundtion bolts,and accessories, connections etc. Complete all as specified and directed by Engineer incharge

od181658/2024_2025 : Supplying, erecting, testing and commissioning FIRE HYDRANT PUMPS DRIVEN BY ELECTRIC MOTOR as per the following: : a) Centrifugal fire hydrant pump of 2280 LPM, @ 88 M Head (8.8 Kg/Cm2) pressure capacity along with horizontal split cast iron casing type, bronze impeller, SS 410 Shaft, mechanical seal foundation bolts / Anti vibration pads, and accessories as specified and directed. b) Electric TEFC Motor of suitable HP, 2900 rpm, 415 V, 3phase, 50 Hz AC, DOL starter including a terminal box for cable entry, size gland and termination, common bed plate and foundation bolts etc complete all as specified and directed.

od181668/2024_2025 : Providing and fixing 25mm x 3mm copper strip on surface or in recess for connections etc as required.

od181681/2024_2025 : Supply and laying of 8 SWG copper wire through ceiling / walls, from the equipment to the nearest Earth pit/Earth bus with necessary accessories as required. (Earth pit shall be executed by other agencies).

od181691/2024_2025 : 1100 V GRADE POWER / CONTROL CABLES Supplying, laying, testing commissioning of suitable FRLS,PVC outer sheathe, steel armored, aluminum / copper conductor, 1100v grade power cables with glands etc. The cables shall be laid in tray / Hume pipe / in trenches/on walls/ floor etc. as required. For cables laid out door the rate shall include earth excavation providing brick and sand protection, refilling and compacting the earth. The minimum size of the cables shall as mentioned below, 12 C x 2.5 Sqmm. copper Diesel engines

od181692/2024_2025 : 1100 V GRADE POWER / CONTROL CABLES Supplying, laying, testing commissioning of suitable FRLS,PVC outer sheathe, steel armored, aluminum / copper conductor, 1100v grade power cables with glands etc. The cables shall be laid in tray / Hume pipe / in trenches/on walls/ floor etc. as required. For cables laid out door the rate shall include earth excavation providing brick and sand protection, refilling and compacting the earth. The minimum size of the cables shall as mentioned below, 4 C x 16 Sqmm. Aluminum Jockey pump

od181702/2024_2025 : 1100 V GRADE POWER / CONTROL CABLES Supplying, laying, testing commissioning of suitable FRLS,PVC outer sheathe, steel armored, aluminum / copper conductor, 1100v grade power cables with glands etc. The cables shall be laid in tray / Hume pipe / in trenches/on walls/ floor etc. as required. For cables laid out door the rate shall include earth excavation providing brick and sand protection, refilling and compacting the earth. The minimum size of the cables shall as mentioned below, 3.5C x 120 sq.mm aluminum for main pumps

od181708/2024_2025 : Providing and fixing of exhaust pipe M.S. Medium grade for Diesel engine shall not be smaller in diameter than engine exhaust outlet extended outside pump house, duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, flexible exhaust connection, residential silencer, instruments and protection as per specification NFPA 20 ,2016 with stand gauge glass, painting, rain cap and necessary supports as required.

od181712/2024_2025 : Supplying, installing, testing and commissioning of double flanged Rubber Expansion Bellows/ joint of standard length as per manufacturers specs including rubber PTFE / Asbestos free gaskets, flanges, nuts, bolts and washers complete as required. (Suction and Discharge side PN16) 150mm nominal diameter

4.6.2 : Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.150 mm width X 50 mm depth X 1.6 mm thickness

4.6.3 : Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.225 mm width X 50 mm depth X 1.6 mm thickness

VRF INDOOR UNITS

od191054/2024_2025 : VRF Indoor Units ::Ductable Unit :-Supply, installation, testing and commissioning of following minimum capacity and external static pressure VRF/VRV ceiling mounted ductable type Indoor unit equipped with washable synthetic media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX copper coil, electronic expansion valve, corded remote control, outer cabinet, vibration isolators, drain pan, other necessary supports etc. suitable for operation on single phase AC supply 230V+10%,50Hz complete as required.(VRF) 11 TR - 4400 cfm - 25mm.

od191059/2024_2025 : VRF Indoor Units ::Ductable Unit :-Supply, installation, testing and commissioning of following minimum capacity and external static pressure VRF/VRV ceiling mounted ductable type Indoor unit equipped with washable synthetic media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX copper coil, electronic expansion valve, corded remote control, outer cabinet, vibration isolators, drain pan, other necessary supports etc. suitable for operation on single phase AC supply 230V+10%,50Hz complete as required.(VRF) 8.5 TR - 3400 cfm - 25mm.

od191062/2024_2025 : VRF Indoor Units ::Ductable Unit :-Supply, installation, testing and commissioning of following minimum capacity and external static pressure VRF/VRV ceiling mounted ductable type Indoor unit equipped with washable synthetic media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX copper coil, electronic expansion valve, corded remote control, outer cabinet, vibration isolators, drain pan, other necessary supports etc. suitable for operation on single phase AC supply 230V+10%,50Hz complete as required.(VRF) 6 TR - 2200 cfm - 25mm.

od191066/2024_2025 : VRF Indoor Units ::Ductable Unit :-Supply, installation, testing and commissioning of following minimum capacity and external static pressure VRF/VRV ceiling mounted ductable type Indoor unit equipped with washable synthetic media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX copper coil, electronic expansion valve, corded remote control, outer cabinet, vibration isolators, drain pan, other necessary supports etc. suitable for operation on single phase AC supply 230V+10%,50Hz complete as required.(VRF) 5.5 TR - 1600 cfm - 25mm.

od191071/2024_2025 : VRF Indoor Units ::Ductable Unit :-Supply, installation, testing and commissioning of following minimum capacity and external static pressure VRF/VRV ceiling mounted ductable type Indoor unit equipped with washable synthetic media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX copper coil, electronic expansion valve, corded remote control, outer cabinet, vibration isolators, drain pan, other necessary supports etc. suitable for operation on single phase AC supply 230V+10%,50Hz complete as required.(VRF) 5 TR - 2000 cfm - 25mm.

od191076/2024_2025 : VRF Indoor Units ::Ductable Unit :-Supply, installation, testing and commissioning of following minimum capacity and external static pressure VRF/VRV ceiling mounted ductable type Indoor unit equipped with washable synthetic media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX copper coil, electronic expansion valve, corded remote control, outer cabinet, vibration isolators, drain pan, other necessary supports etc. suitable for operation on single phase AC supply 230V&amp;+10%,50Hz complete as required.(VRF) 3 TR - 1200 cfm - 50mm.

od191080/2024_2025 : VRF Indoor Units ::Ductable Unit :-Supply, installation, testing and commissioning of following minimum capacity and external static pressure VRF/VRV ceiling mounted ductable type Indoor unit equipped with washable synthetic media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX copper coil, electronic expansion valve, corded remote control, outer cabinet, vibration isolators, drain pan, other necessary supports etc. suitable for operation on single phase AC supply 230V&amp;+10%,50Hz complete as required.(VRF) 2 TR - 800 cfm - 50mm.

HIGH WALL UNIT

od191038/2024_2025 : High Wall Unit:-Supply installation testing and commissioning of following minimum capacity high wall units with multilevel filter for better air quality ,auto restart and multimode.(VRF) 2.0 TR/800 CFM

od191042/2024_2025 : od330392/2022_2023 : High Wall Unit:-Supply installation testing and commissioning of following minimum capacity high wall units with multilevel filter for better air quality ,auto restart and multimode.(VRF) 1.5 TR/600CFM

od191660/2024_2025 : High Wall Unit:-Supply installation testing and commissioning of following minimum capacity high wall units with multilevel filter for better air quality ,auto restart and multimode.(VRF) 1 TR/400CFM

DX SPLIT AC-FAN COIL UNIT

od186289/2024_2025 : Supply ,Erecting, Testing and commissioning of Ceiling Mounted Ductable Type AC Units suitable to operate at 48deg;C ambient temperature comprising of Combination of hermetic inverter compressors, Matching air cooled condenser with copper tubes and aluminium fins duly covered by anticorrosion and hydrophillic resin film, complete with high/low pressure cut-outs, oil pressure failure switch, fan motor, safety thermostat, over current relay, fusible plugs, fuses,cabling etc.and suitable for operation on 380V~415V~3Ph~50Hz A.C. supply. Oil separator suitable for the refrigerant piping, Accumulator, liquid and gas shut-off valves and solenoid valves/modulation valve with fittings to interconnect compressor, condenser and evaporator coils, flexible connection(canvase), initial charge of R-410A Gas and Oil, frame work for mounting the above outdoor unit and thermostate its wiring etc.e following capaicties of the ODU and IDU - 2.0 TR Cassette Unit with drain pump

od186290/2024_2025 : Supply ,Erecting, Testing and commissioning of Ceiling Mounted Ductable Type AC Units suitable to operate at 48deg;C ambient temperature comprising of Combination of hermetic inverter compressors, Matching air cooled condenser with copper tubes and aluminium fins duly covered by anticorrosion and hydrophillic resin film, complete with high/low pressure cut-outs, oil pressure failure switch, fan motor, safety thermostat, over current relay, fusible plugs, fuses,cabling etc.and suitable for operation on 380V~415V~3Ph~50Hz A.C. supply. Oil separator suitable for the refrigerant piping, Accumulator, liquid and gas shut-off valves and solenoid valves/modulation valve with fittings to interconnect compressor, condenser and evaporator coils, flexible connection(canvase), initial charge of R-410A Gas and Oil, frame work for mounting the above outdoor unit and thermostate its wiring etc.e following capaicties of the ODU and IDU - 1.5 TR Cassette Unit with drain pump

AHU(DOUBLE DECKER)-OUTDOOR UNITS

od186564/2024_2025 : WALL MOUNTED PROPELLER TYPE FAN The supply installation of wall mountable propeller type inline fan with all accessories like fan, motor, mounting frame, cowl duct piece, protection guarads,etc.,. The motor should be of IP21, class B insulation suitable for operating at 3 phase, 230V, 50hz power supply. 1000 CFM / 2mm Static GF Electrical substation

od186565/2024_2025 : WALL MOUNTED PROPELLER TYPE FAN for STP The supply installation of wall mountable propeller type inline fan with all accessories like fan, motor, mounting frame, cowl duct piece, protection guarads,etc.,. The motor should be of IP21, class B insulation suitable for operating at 3 phase, 230V, 50hz power supply. 2000 CFM / 10mm Static

od186566/2024_2025 : WALL MOUNTED PROPELLER TYPE FAN The supply installation of wall mountable propeller type inline fan with all accessories like fan, motor, mounting frame, cowl duct piece, protection guarads,etc.,. The motor should be of IP21, class B insulation suitable for operating at 3 phase, 230V, 50hz power supply. 100 CFM / 2mm Static

od186567/2024_2025 : WALL MOUNTED PROPELLER TYPE FAN :- The supply installation of wall mountable propeller type inline fan with all accessories like fan, motor, mounting frame, cowl duct piece, protection guarads,etc.,. The motor should be of IP21, class B insulation suitable for operating at 3 phase, 230V, 50hz power supply. 150 CFM / 10mm Static

od186568/2024_2025 : WALL MOUNTED PROPELLER TYPE FAN :- The supply installation of wall mountable propeller type inline fan with all accessories like fan, motor, mounting frame, cowl duct piece, protection guarads,etc.,. The motor should be of IP21, class B insulation suitable for operating at 3 phase, 230V, 50hz power supply. 200 CFM / 10mm Static

od186569/2024_2025 : WALL MOUNTED PROPELLER TYPE FAN :- The supply installation of wall mountable propeller type inline fan with all accessories like fan, motor, mounting frame, cowl duct piece, protection guarads,etc.,. The motor should be of IP21, class B insulation suitable for operating at 3 phase, 230V, 50hz power supply. 500 CFM / 10mm Static

od186570/2024_2025 : WALL MOUNTED PROPELLER TYPE FAN The supply installation of wall mountable propeller type inline fan with all accessories like fan, motor, mounting frame, cowl duct piece, protection guarads,etc.,. The motor should be of IP21, class B insulation suitable for operating at 3 phase, 230V, 50hz power supply. 650 CFM / 2mm Static GF

od186571/2024_2025 : WALL MOUNTED PROPELLER TYPE FAN The supply installation of wall mountable propeller type inline fan with all accessories like fan, motor, mounting frame, cowl duct piece, protection guarads,etc.,. The motor should be of IP21, class B insulation suitable for operating at 3 phase, 230V, 50hz power supply. 800 CFM / 2mm Static

od186629/2024_2025 : CIRCULAR MIXED FLOW INLINE FAN :-The supply installation of Circular mixed flow inline fan with all accessories like fan, motor, flanges, non-canvass type fire retardant flexible connections, etc., The impeller shall be of forward type. The motor should be of IP21, class B insulation suitable for operating at 1phase, 230V, 50hz power supply. 150 CFM / 25mm Static

od186630/2024_2025 : CIRCULAR MIXED FLOW INLINE FAN - The supply installation of Circular mixed flow inline fan with all accessories like fan, motor, flanges, non-canvass type fire retardant flexible connections, etc., The impeller shall be of forward type. The motor should be of IP21, class B insulation suitable for operating at 1phase, 230V, 50hz power supply. 200 CFM / 30mm Static

od186631/2024_2025 : CIRCULAR MIXED FLOW INLINE FAN :-The supply installation of Circular mixed flow inline fan with all accessories like fan, motor, flanges, non-canvass type fire retardant flexible connections, etc., The impeller shall be of forward type. The motor should be of IP21, class B insulation suitable for operating at 1phase, 230V, 50hz power supply. 250 CFM / 40mm Static

od186632/2024_2025 : CIRCULAR MIXED FLOW INLINE FAN :-The supply installation of Circular mixed flow inline fan with all accessories like fan, motor, flanges, non-canvass type fire retardant flexible connections, etc., The impeller shall be of forward type. The motor should be of IP21, class B insulation suitable for operating at 1phase, 230V, 50hz power supply. 300 CFM / 15mm Static

od186633/2024_2025 : CIRCULAR MIXED FLOW INLINE FAN :-The supply installation of Circular mixed flow inline fan with all accessories like fan, motor, flanges, non-canvass type fire retardant flexible connections, etc., The impeller shall be of forward type. The motor should be of IP21, class B insulation suitable for operating at 1phase, 230V, 50hz power supply. 400 CFM / 50mm Static

od186634/2024_2025 : CIRCULAR MIXED FLOW INLINE FAN :-The supply installation of Circular mixed flow inline fan with all accessories like fan, motor, flanges, non-canvass type fire retardant flexible connections, etc., The impeller shall be of forward type. The motor should be of IP21, class B insulation suitable for operating at 1phase, 230V, 50hz power supply. 450 CFM / 60mm Static

od186635/2024_2025 : CIRCULAR MIXED FLOW INLINE FAN :-The supply installation of Circular mixed flow inline fan with all accessories like fan, motor, flanges, non-canvass type fire retardant flexible connections, etc., The impeller shall be of forward type. The motor should be of IP21, class B insulation suitable for operating at 1phase, 230V, 50hz power supply. 500 CFM / 20mm Static

od186636/2024_2025 : CIRCULAR MIXED FLOW INLINE FAN :-The supply installation of Circular mixed flow inline fan with all accessories like fan, motor, flanges, non-canvass type fire retardant flexible connections, etc., The impeller shall be of forward type. The motor should be of IP21, class B insulation suitable for operating at 1phase, 230V, 50hz power supply. 825 CFM / 25mm Static

od186637/2024_2025 : CIRCULAR MIXED FLOW INLINE EX.FAN:- The supply installation of Circular mixed flow inline exhaust fan with all accessories like fan, motor, flanges, non-canvass type fire retardant flexible connections, etc., The impeller shall be of forward type. The motor should be of IP21, class B insulation suitable for operating at 1phase, 230V, 50hz power supply. 1000 CFM / 25mm Static

od186638/2024_2025 : CIRCULAR MIXED FLOW INLINE FAN :-The supply installation of Circular mixed flow inline fan with all accessories like fan, motor, flanges, non-canvass type fire retardant flexible connections, etc., The impeller shall be of forward type. The motor should be of IP21, class B insulation suitable for operating at 1phase, 230V, 50hz power supply. 1600 CFM / 20mm Static

od186639/2024_2025 : CIRCULAR MIXED FLOW INLINE FAN :-The supply installation of Circular mixed flow inline fan with all accessories like fan, motor, flanges, non-canvass type fire retardant flexible connections, etc., The impeller shall be of forward type. The motor should be of IP21, class B insulation suitable for operating at 1phase, 230V, 50hz power supply. 2300 CFM / 40mm Static

od186640/2024_2025 : Inline type fan suitable for ducted OT area fumigation exhaust application consisting of GSS cabinet, fan, access door, flanged inlet and outlet connection, thermally protected motor and low noise level. Supply, installation, testing and commissioning of 450 cfm , TSP - 20 mm - For OT

od186648/2024_2025 : Inline type fan suitable for ducted fresh air application consisting of GSS cabinet, fan, access door, flanged inlet and outlet connection, thermally protected motor and low noise level.Fan efficiency should be minimum 60% to meet ECBC 2017 compliance. Supply, installation, testing and commissioning of 150 cfm , TSP - 15 mm

od186649/2024_2025 : Inline type fan suitable for ducted fresh air application consisting of GSS cabinet, fan, access door, flanged inlet and outlet connection, thermally protected motor and low noise level.Fan efficiency should be minimum 60% to meet ECBC 2017 compliance. Supply, installation, testing and commissioning of 200 cfm , TSP - 15 mm

od186650/2024_2025 : Inline type fan suitable for ducted fresh air application consisting of GSS cabinet, fan, access door, flanged inlet and outlet connection, thermally protected motor and low noise level.Fan efficiency should be minimum 60% to meet ECBC 2017 compliance. Supply, installation, testing and commissioning of 400 cfm , TSP - 20 mm

od186651/2024_2025 : Inline type fan suitable for ducted fresh air application consisting of GSS cabinet, fan, access door, flanged inlet and outlet connection, thermally protected motor and low noise level.Fan efficiency should be minimum 60% to meet ECBC 2017 compliance. Supply, installation, testing and commissioning of 450 cfm , TSP - 25 mm

od186652/2024_2025 : Inline type fan suitable for ducted fresh air application consisting of GSS cabinet, fan, access door, flanged inlet and outlet connection, thermally protected motor and low noise level.Fan efficiency should be minimum 60% to meet ECBC 2017 compliance. Supply, installation, testing and commissioning of 600 cfm , TSP - 30 mm

od186653/2024_2025 : Inline type fan suitable for ducted fresh air application consisting of GSS cabinet, fan, access door, flanged inlet and outlet connection, thermally protected motor and low noise level.Fan efficiency should be minimum 60% to meet ECBC 2017 compliance. Supply, installation, testing and commissioning of 650 cfm , TSP - 70 mm

od186654/2024_2025 : Inline type fan suitable for ducted fresh air application consisting of GSS cabinet, fan, access door, flanged inlet and outlet connection, thermally protected motor and low noise level.Fan efficiency should be minimum 60% to meet ECBC 2017 compliance. Supply, installation, testing and commissioning of 800 cfm , TSP - 30 mm

od186655/2024_2025 : Inline type fan suitable for ducted fresh air application consisting of GSS cabinet, fan, access door, flanged inlet and outlet connection, thermally protected motor and low noise level.Fan efficiency should be minimum 60% to meet ECBC 2017 compliance. Supply, installation, testing and commissioning of 900 cfm , TSP - 70 mm

od186656/2024_2025 : Inline type fan suitable for ducted fresh air application consisting of GSS cabinet, fan, access door, flanged inlet and outlet connection, thermally protected motor and low noise level.Fan efficiency should be minimum 60% to meet ECBC 2017 compliance. Supply, installation, testing and commissioning of 1000 cfm , TSP - 60 mm

od186657/2024_2025 : Inline type fan suitable for ducted fresh air application consisting of GSS cabinet, fan, access door, flanged inlet and outlet connection, thermally protected motor and low noise level.Fan efficiency should be minimum 60% to meet ECBC 2017 compliance. Supply, installation, testing and commissioning of 1100 cfm , TSP - 60 mm

od186658/2024_2025 : Inline type fan suitable for ducted fresh air application consisting of GSS cabinet, fan, access door, flanged inlet and outlet connection, thermally protected motor and low noise level.Fan efficiency should be minimum 60% to meet ECBC 2017 compliance. Supply, installation, testing and commissioning of 1600 cfm , TSP - 70 mm

od186659/2024_2025 : Inline type fan suitable for ducted fresh air application consisting of GSS cabinet, fan, access door, flanged inlet and outlet connection, thermally protected motor and low noise level.Fan efficiency should be minimum 60% to meet ECBC 2017 compliance. Supply, installation, testing and commissioning of 1800 cfm , TSP - 70 mm

od186660/2024_2025 : Inline type fan suitable for ducted fresh air application consisting of GSS cabinet, fan, access door, flanged inlet and outlet connection, thermally protected motor and low noise level.Fan efficiency should be minimum 60% to meet ECBC 2017 compliance. Supply, installation, testing and commissioning of 2000 cfm , TSP - 70 mm

od186661/2024_2025 : Inline type fan suitable for ducted fresh air application consisting of GSS cabinet, fan, access door, flanged inlet and outlet connection, thermally protected motor and low noise level.Fan efficiency should be minimum 60% to meet ECBC 2017 compliance. Supply, installation, testing and commissioning of 2400 cfm , TSP - 70 mm

LOW VALUE ITEMS

od184084/2024_2025 : Centralised microprocessor based controller capable of controlling the entire system from a central location. This shall facilitate ON / OFF, temperature setting, fan speed, swing state of the louvers, run time scheduling etc of all the indoor units. The controller shall detect and display the status and various operating parameters of the outdoor units and the indoor units. The controller shall be BMS compatible.

od184099/2024_2025 : SITC of ODU connecting Kit and panel as per OEM

od184103/2024_2025 : S.I.T.C of SS grade plenum of suitable size for the equipments consisting of mini pleat HEPA filter, collar, volume control damper and access to filter. The arrangement should be suitable to mount above the OT Table. The unit shall be provided with a perforated Aluminum sheet at the bottom for air discharge.

od184108/2024_2025 : TERMINAL HEPA FILTERS :- Supply, Installation, Testing Commissioning of laminar station and SS plenum as follow: Laminar flow diffuser essentially should consists in: A plenum, constituting the pressurization chamber, entirely constructed of 1mm-thick 304 stainless steel sheet, with smooth finish to prevent dust collection. Four/Six square flanges are mounted to connect the plenum to air distribution ducts. External stiffening ribs and anticondensation insulation. Supply air filter housing, 304 stainless steel frame with stainless steel fasteners. Filtering unit consisting of absolute filters with efficiency &gt; 99,995%. Classification: CEN EN 1822 - H14. Sealed, stainless steel central component for connection of the surgical lamp. Lower component should consists of 1mm-thick 304 stainless steel panels with conveniently sized slots to assure the requested flow. The special system allows the perforated panels to be locked in and fully opened for easy and safe servicing and replacing of filters. Stainless steel mounting frame, constructed so as to assure sealed connection to the suspended ceiling, and perfect separation from the controlled work area by means of synthetic rubber seals. Diffuser Size: 2400x1800MM

od184113/2024_2025 : Communication cable between indoor and outdoor units of 2Cx1.5 Sqmm Cu. Cable placed in a 3/4 conduit.

od184114/2024_2025 : Control cable of OEM recommended size between indoor and outdoor units of Dx type with necessary fixing arrangement.

od184118/2024_2025 : Supply laying and commissioning of 4Cx2.5 sqmm Copper armored power cable from Stabilizer to outdoor units

od184119/2024_2025 : SITC of Copper Refrigerant piping with 18G HD Copper pipes, insulated with specified thickness nitrile rubber tubings and joints sealed with black cotton tape. 1) 1/4 dia (6.4 MM) with 13 mm insulation

od184123/2024_2025 : SITC of Copper Refrigerant piping with 18G HD Copper pipes, insulated with specified thickness nitrile rubber tubings and joints sealed with black cotton tape. 2) 3/8 dia (9.5 MM) with 13 mm insulation

od184126/2024_2025 : SITC of Copper Refrigerant piping with 18G HD Copper pipes, insulated with specified thickness nitrile rubber tubings and joints sealed with black cotton tape. 3) 1/2 dia (12.7 MM) with 13 mm insulation

od184130/2024_2025 : SITC of Copper Refrigerant piping with 18G HD Copper pipes, insulated with specified thickness nitrile rubber tubings and joints sealed with black cotton tape. 4) 5/8 dia (15.9 MM ) with 13 mm insulation

od184133/2024_2025 : SITC of Copper Refrigerant piping with 18G HD Copper pipes, insulated with specified thickness nitrile rubber tubings and joints sealed with black cotton tape. 5) 3/4 dia (19.1 MM ) with 13 mm insulation

od184136/2024_2025 : SITC of Copper Refrigerant piping with 18G HD Copper pipes, insulated with specified thickness nitrile rubber tubings and joints sealed with black cotton tape. 6) 7/8 dia (22.4 MM) with 19 mm insulation

od184141/2024_2025 : SITC of Copper Refrigerant piping with 18G HD Copper pipes, insulated with specified thickness nitrile rubber tubings and joints sealed with black cotton tape. 7) 1 dia (25.8 MM) with 19 mm insulation

od184142/2024_2025 : SITC of Copper Refrigerant piping with 18G HD Copper pipes, insulated with specified thickness nitrile rubber tubings and joints sealed with black cotton tape.8) 1-1/4 dia (28.6 MM) with 19 mm insulation

od184144/2024_2025 : SITC of Copper Refrigerant piping with 18G HD Copper pipes, insulated with specified thickness nitrile rubber tubings and joints sealed with black cotton tape. 9) 1-3/8 dia (34.9 MM) with 19 mm insulation

od186858/2024_2025 : SITC of Copper Refrigerant piping with 18G HD Copper pipes, insulated with specified thickness nitrile rubber tubings and joints sealed with black cotton tape.10) 1-5/8 dia (38.1 MM) with 19 mm insulation

od184147/2024_2025 : SITC of Copper Refrigerant piping with 18G HD Copper pipes, insulated with specified thickness nitrile rubber tubings and joints sealed with black cotton tape. 10) 1-5/8 dia (41.3 MM) with 19 mm insulation

od184153/2024_2025 : Refnet joints of all required size of copper pipes as per manufacturer recommendation.

SUB HEAD 'C' DUCTING AND GRILLS

16.12.1.1 : Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required.Factory fabricated GSS sheet metal rectangular ducting as per IS 655-2006

16.12.1.2 : Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required.Factory fabricated GSS sheet metal rectangular ducting as per IS 655-2006

16.12.1.3 : Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required.Factory fabricated GSS sheet metal rectangular dueling as per IS 655-2006

16.12.1.4 : Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required.factory fabricated GSS sheet metal rectangular dueling as per IS 655-2006

16.12.2.1 : Supply, Installation, balancing and commissioning of fabricated at site GSS sheet metal rectangular / round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports, etc as per approved drawings and specifications of following sheet thickness complete as required.Site fabricated GSS sheet metal rectangular ducting as per IS 655-2006 for 0.63 mm thick

16.12.2.2 : Supply, Installation, balancing and commissioning of fabricated at site GSS sheet metal rectangular / round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports, etc as per approved drawings and specifications of following sheet thickness complete as required.Site fabricated GSS sheet metal rectangular ducting as per IS 655-2006 for 0.8. mm thick

16.12.2.3 : Supply, Installation, balancing and commissioning of fabricated at site GSS sheet metal rectangular / round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports, etc as per approved drawings and specifications of following sheet thickness complete as required.Site fabricated GSS sheet metal rectangular ducting as per IS 655-2006 for 1.00 mm thick

16.12.2.4 : Supply, Installation, balancing and commissioning of fabricated at site GSS sheet metal rectangular / round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports, etc as per approved drawings and specifications of following sheet thickness complete as required.Site fabricated GSS sheet metal rectangular ducting as per IS 655-2006 for 1.25 mm thick

od184121/2024_2025 : Supply, installation, balancing and commissioning of factory fabricated Aluminium sheet metal rectangular/round ducting for OTs complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of Thickness 0.64(22G) mm sheet

od184124/2024_2025 : Factory fabricated double skin plenum of 25mm thick PUF panels of density 40 kg/cum, casing inside outside material - GI casing inside outside thickness - 0.6 mm . The area indicated is the surface area of the plenum.

od184127/2024_2025 : Supplying, fixing acoustic lining on wall and ceiling of AHU rooms with 50mm thick, density 32 kg/cu.m resin bonded glass fiber insulation friction fixed in 610mm x 610 mm frame work made of 25X50X50X50X25 mm made out of 0.6mm thick GI sheet U shaped channel and covered with reinforced fiber glass tissue and finished with 0.80 mm perforated aluminium sheet etc. complete as required and as per specifications.

16.21.1 : Supply and fixing of acoustic lining of supply air duct and plenum with 25 mm thick resin bonded glass wool having density of 32 kg/m3, with 25 mm X 25 mm Gl section of 1.25 mm thick, at 600 mm centre to centre covered with Reinforced Plastic tissue paper and 0.5 mm thick perforated aluminum sheet fixed to inside surface of ducts with cadmium plated nuts, bolts, stick pins, CPRX compound etc. complete as required and as per specifications. 16 <br> <br>Acoustic lining of supply air duct and plenum with 25 mm thick resin bonded glass wool having density of 32 kg/m3Acoustic lining of supply air duct and plenum with 25 mm thick resin bonded glass wool having density of 32 kg/m3

od184132/2024_2025 : Supplying and fixing 50mm thick aluminium foil faced resin bonded fibre glass insulation (on duct) of density 24 kg/cu.m or mineral wool insulation(non combustible) of density 44 kg/cum after applying two coats of cold setting adhesive (CPRX compound) sealing all joints with self adhesive aluminium tape covering with 0.63mmx19mm GI wire mesh netting butting all joints and laced with GI wire complete and finally covered with one layer of tar felt stuck with hot bitumen as per specifications and as required. (for outdoor applications)

od184134/2024_2025 : Supplying and fixing of following thickness closed cell Nitrile rubber (class O) insulation on duct after applying two coats of cold setting adhesive (CPRX compound). The all joints shall sealed cotton tape insulation complete as per specifications and 10 mm thk.

od184137/2024_2025 : Supplying and fixing of following thickness closed cell Nitrile rubber (class O) insulation on duct after applying two coats of cold setting adhesive (CPRX compound). The joints shall sealed cotton tape insulation complete as per specifications and 13 mm thk.

od184140/2024_2025 : Supplying and fixing of following thickness duly laminated aluminum foil of mat finish closed cell Nitrile rubber (Class O) insulation on existing duct after applying suitable adhesive for Nitrile rubber. The joints shall be sealed with 50 mm wide and 3 mm thick self adhesive nitrile rubber tape insulation complete as per specifications and as required.19 mmsqm

16.13 : Supply, Insulation, testing and commissioning of GI volume control duct damper complete with neoprene rubber gaskets, nuts, bolts, screws linkages, flanges etc, as per specifications. GI volume control duct damper

od184146/2024_2025 : Supply, installation, testing and commissioning of GSS Non return damper with frame and Blades neoprene rubber gaskets, nuts, bolts, screws linkages, flanges etc, as per specifications.

16.14.1 : Supply, Installation, testing and commissioning of motorized (ON-OFF Type) duct mounted GI volume control damper with enthalpy sensor and necessary control wire (minimum 1.5 sqmm) for integration within AHU roomMotorized (ON-OFF Type) duct mounted GI volume control damper

16.15 : Suppluying and Fixing of powder costed extruded aluminium Supply Air Grills with aluminium volume control dampers as per specifications.

od184156/2024_2025 : Supply, installation, testing commissioning of thermal insulated flexible duct of following sizes duly supported at regular interval as per site requirement etc. complete as required as per specifications of 250 mm dia

od184158/2024_2025 : Supplying fixing of powder coated extruded aluminium Return Air Grills with louvers but without volume control dampers complete as required.

od184159/2024_2025 : Supply, installation, testing commissioning of thermal insulated flexible duct of following sizes duly supported at regular interval as per site requirement etc. complete as required as per specifications of 200 mm dia

od184161/2024_2025 : Supply, installation, testing commissioning of thermal insulated flexible duct of following sizes duly supported at regular interval as per site requirement etc. complete as required as per specifications of 150 mm dia

od184163/2024_2025 : Supply, installation, testing commissioning of Butter fly dampers of GI construction made out of 22G sheet with lever, brass bush with spindle and locking arrangement at the take off for the supply air diffusers. complete as required as per specifications of 200 mm dia

od184165/2024_2025 : Supply, installation, testing commissioning of Butter fly dampers of GI construction made out of 22G sheet with lever, brass bush with spindle and locking arrangement at the take off for the supply air diffusers. complete as required as per specifications of 250 mm dia

16.17 : Supplying, fixing testing commissioning of supply air diffusers of powder coated aluminum with aluminum volume control dampers with anti smudge ring and removable core.

16.18 : Supplying, fixing testing commissioning of Return air diffusers of powder coated aluminum without volume control dampers with anti smudge ring and removable core.

od184168/2024_2025 : Supplying, fixing testing commissioning of Exhaust Disc Valve for the each disc valve

od184171/2024_2025 : Non Vision grills for the toilet doors. The grills shall be supplied in two matching halves and shall match the door thickness. The grills shall be powder coated .

od184172/2024_2025 : Supplying, fixing, testing commissioning of powder coated extruded aluminium section fresh air grill in weather maker room with aluminium volume control dampers, bird screen etc complete as required

od184174/2024_2025 : CONDENSATE DRAIN PIPING : Supply, inatallation, testing and commissioning of condensate drain UPVC piping as per BIS 4985 with necessary clamps, supports, hangers and fitting such as bend, tees, reducers etc. duly insulated with 9 mm thick chemically cross-linked closed cell ntrile rubber insulation, fire retardant grade as per the drawing and relavent standards - 20mm dia

od184176/2024_2025 : Supply,installation, testing and commissioning of condensate drain UPVC piping as per BIS 4985 with necessary clamps, supports, hangers and fitting such as bend, tees, reducers etc. duly insulated with 9 mm thick chemically cross-linked closed cell ntrile rubber insulation, fire retardant grade as per the drawing and relavent standards - 25mm dia

od184177/2024_2025 : Supply,installation, testing and commissioning of condensate drain UPVC piping as per BIS 4985 with necessary clamps, supports, hangers and fitting such as bend, tees, reducers etc. duly insulated with 9 mm thick chemically cross-linked closed cell ntrile rubber insulation, fire retardant grade as per the drawing and relavent standards - 40mm dia

od184178/2024_2025 : Underdeck insulation with 50mm thick TF quality Expanded polystyrene fixed to the slab with Rawl plugs and GI washers and tied with GI wire.

od184179/2024_2025 : SITC of Al.powder coated 6 continuous grill with end flanges

od184180/2024_2025 : SITC of Al.powder coated 4 continuous grill with end flanges

od184181/2024_2025 : SITC of Opposed blade collar dampers of powder coated Aluminium.

od184182/2024_2025 : Supply, installation, testing commissioning of Butter fly dampers of GI construction made out of 22G sheet with lever, brass bush with spindle and locking arrangement at the take off for the supply air diffusers. complete as required as per specifications of 150 mm dia

od184183/2024_2025 : Return air cross talk attenuators -Factory fabricated Z type made of 24G GI sheets of 300mm wide x 300mm height of 1.5m length with accoustic lining of 15mm thick open cell nitrile rubber insulation of class-1 accoustic 140-180 Kg / M3 density stuck to the clean internal surface of the duct with good quality low VOC content adhesive. Suitable size grille at the outlet to be considered accordingly.complete as required as per specifications. Type-01

od184184/2024_2025 : Return air cross talk attenuators -Factory fabricated Z type made of 24G GI sheets of 400mm wide x 500mm height of 1.5m length with accoustic lining of 15mm thick open cell nitrile rubber insulation of class-1 accoustic 140-180 Kg / M3 density stuck to the clean internal surface of the duct with good quality low VOC content adhesive. Suitable size grille at the outlet to be considered accordingly.complete as required as per specifications.Type-02

16.20.1 : Supplying, Fixing, testing and commissioning of fire dampers in supply air duct/ main branch and return air path as and where required of required sizes i/c control wiring, the damper shall be motorized and spring return so as to close the damper in the event of power failure automatically and open the same in case of power being restored. The spring return action shall be inbuilt mechanism and not externally mounted. The damper shall also be closed in the event of fire signal complete as required and as per specifications.Fire damper

od188411/2024_2025 : Supply, installation, testing and commissioning of Actuator for the above fire damper

STARTER PANEL VFD WITH BYPASS STARTER PANEL

od184090/2024_2025 : SITC of outdoor wheather proof Polycarbonate box of IP level 67 with 415V 4P 32/40/63 Ampere 100mA ELCB including all fixing mountings.

od184094/2024_2025 : SITC of Automatic timer control with Power connection for switching the Fan/AC etc. Consisting of the following1. 2 Nos. 63A, 415V, AC-4 duty 3P contactor-2 set2. Timer-1 No.3. Auxilliary switches and Push button, actuation etc.-1 set4. Enclosure fabricated with 16SWG CRCA sheet

HT Works

od219729/2024_2025 : HT INSTALLATION TOD METER (OUTDOOR LBS with METERING PANEL) Supply installation testing and commissioning of 11kV, outdoor, wheatherproof, metering with 11kV, 3phase, 50hz, 400A, load break switch having short time current rating of 18kA, cubicle fabricated out of 14 SWG CRCA sheet, powder coated after seven tank process, provision for connecting 3x300sqmm cable at both ends, 3nos 25/5A, Cl-0.2s, 10VA CT, 11kV/110V, Cl-0.2, 25VA PT, fixing of already tested TOD meter fixed in pilfer-proof outdoor meter box suitable for housing the meter and test terminal block (TTB), all complying with relevant standards and as per the requirements of KSEBL including excavation, backfilling RCC foundation for panel.

od219737/2024_2025 : Supply, installation and testing of TOD meter for KSEB (0.2S accuracy class, 3ph 4 wire, DLMS compatible) test terminals etc. including arranging testing of CT and meter in the TMR section of KSEB and as per recommendations and fixing in the metering panel complete as required.

od219742/2024_2025 : UNITISED SUB STATION - INDOOR - WITH VCB PANEL - Supply, installation, testing commissioning of 11KV - 1000KVA, Indoor Unitised Substation (USS) with the following: Incomer: 11kV, 800A, 350MVA, VCB with earth switch, 24V dc shunt trip coil, battery, battery charger, overcurrent and earth fault relay, protection CT, 50-25/5A, Cl 5P10 CT, 3O/C and 1EF Protection static relays with high set element, cable box suitable for 3x300sqmm 11kVcable and emergency OFF push button,etc complete - 1No. Transformer: 1000kVA, 11kV/433V, 50Hz, 3phase, Cu-wound AN cooled, Vector DYN-11, cast resin, indoor, dry-type transformer with off-load tap changer, winding temperature alarm and trip, HV terminals suitable for interconnecting with VCB and LV terminals suitable for connecting bus duct - 1No Suitable base plate for mounting of the equipment and enclosure for the USS

od219746/2024_2025 : SUPPLY OF HT CABLES: Supply, testing and commissioning of the following PVC Insulated Armoured Aluminium Cables XLPE (A2XFY) to be laid in HT trenches, cable trays, hume pipes, including supply and fixing of painted MS clamps, spacing of the clamps not exceeding 60cms, nuts and bolts, screws, identification tags, route markers etc. required for clamping intervals as necessary. 3.0C x 150 SQ.MM.XLPE

8.1.2 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.Above 120 sq. mm and upto 400 sq. mm

8.2.2 : Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etcAbove 120 sq. mm and upto 400 sq. mm

8.3.2 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.Above 120 sq. mm and upto 400 sq. mm

8.4.2 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size in the existing masonry open duct as required.Above 120 sq. mm and upto 400 sq. mm

10.2.2 : Supplying and making outdoor cable end jointing with cast resin compound, including lugs and other jointing materials, for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required:120 sq. mm

10.4.2 : Supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required:120 sq. mm

UPS DG SETS

od219722/2024_2025 : DG SET: Supply Installation testing and commssioning of 3phase., 500 kVA 433V, 0.8pf. 50Hz, 1500rpm DG Prime Rated Diesel Generator Sets as detailed below and as shown on drawings. Water cooled diesel generating set comprising diesel engine, alternator, fuel tank, starting system, battery, electronic governor, etc. with all accessories as required. The generator set shall have an integral type acoustic enclosure as per latest CPCB IV norms. Smoke exhaust emission from diesel engines shall comply with the latest emission standards. Generator set shall be inclusive of flywheel, flexible direct coupling, air cleaner, fire and corrosion resistant coating applied in two coats with necessary primer, fan with guard, fuel pump, fuel filter, electrical starting system with starter, 24V battery with 240/24V charger, instrument panel, RPM indicator, residential silencer, etc. The control panel shall be floor mounted dust and vermin proof with suitably rated, 800 A,4Pole, 50kA, ACB complete with all necessary relays, CTs, control wiring,low set earth fault relay with CT, 3x240V, cl 0.5s Energy meter etc. Scope shall include first filling of oil up to 500 Litres of 990 litre capacity diesel tank for commissioning of the DG set.

od219728/2024_2025 : Providing, fixing of exhaust pipe line of 200/150mm dia B class MS pipe with accessories like flange, supports, through wall, including providing thermal insulation heat resistance painting etc compleete

od219738/2024_2025 : 180 KVA UPS WITH BATTERY BANK SITC of Three Phase Input / Output IBGT based parallel redendunt (3X 60) 180 KVA UPS system with minimum 30 minutes back up :- The Three Phase input Voltage shall be 4wire, 415V, variable between +20% to - 20%; 50Hz +/- 6%. The UPS System shall deliver Clean; ripple free pure sine wave output waveform in presence as well as failure of supply mains. The current and voltage harmonic distortions generated by the UPS systems shall be with in acceptable limits as per international and national norms. (Ripple [without Battery &lt; 1 %]), (THD&lt; 2% max, for 100% Linear load &lt; 5% max, for 100% Non-Linear load) UPS system shall be Double conversion, Microprocessor based True On Line system with individual battery banks having in-built galvanic Isolation Transformer at output and own Cooling arrangements.UPS system shall be with LCD Display, 3Phase input and 3Phase output with PWM IGBT based DSP control, 20 Minutes external SMF battery backup and auto by-pass.output voltage Range - 415V &plusmn; 0.5%,frequency Range - 50 Hz, plus or minus 0.05%,O/P power factor shall be minimum 0.9 ,THD (Linear Load) - lt;2% THD (Non Linear Load) - 5% Crest Factor - 3:1 efficiency - greater than; 95%,over load capacity - 110% - 5min , 150% - 30s.

od219739/2024_2025 : BUS DUCTS Supply, installation, testing commissioning of Complete sandwich type busduct system with flexible termination at both ends including all the straight lengths, vertical horizontal elbows, joint covers, supporting arrangement like wall supports hanger supports, end feed units, end cover units, flexible termination at both ends, etc. required to form a complete installation as per site conditions. The aluminium conductor used in the bus duct shall have 99.9% purity. The jointing arrangement shall be monobloc jointing system with double nut torque bolt. The jointing system shall be made up of silvered copper plates. The complete installation shall be checked for its correctness and compliance with specifications and standards by the manufacturers representative and a certificate of compliance shall be issued by the manufacturer. 1600A, IP54, 4P, feeder bus inclusive of all accessories for interconnection between transformer and main distribution board (MDB)

LT PANELS

od219723/2024_2025 : LT MAIN SWITCH BOARDS ( PANEL BOARDS) MSB WITH PLC BASED AMF SYSTEM: -MAIN SWITCH BOARD (MSB):.Supply, installation testing and commissioning of LT Floor mounted, compartmentalised dust and vermin proof, panel board fabricated using CRCA 16/14 SWG wpowder coated with two coats paint over two coats of zinc chromate primer, before painting the panel board shall be treated through 7-tank cold pre-treatment process. The panel shall be complete with all necessary switch gear, control gear, control wiring, metering, all protective relays, interlocks and instrumentation system suggested by Electrical inspectorate, etc. as required and as listed below in brief and details in technical specifications.All necessary components, rotary handle, spreader, neoprene gasket, door locking arrangements, suitable earth bus including all accessories. Bus Bar: Al busbar sized suitably for 1600A TPN and 25x6 Cu Earth Incomer: 1. 1600A, 50kA, 4P, EDO, ACB - 1 Nos 2. 800A, 50kA, 4P,EDO, ACB with RPO - 2 Nos 3. 200A, 36kA, 4P, Motorised MCCB - 1 No All the incoming and outgoing feeders shall be fitted with Maximum demand indicators with RS 485 communication port. Bus Coupler: 1600A, 50kA, 4P ACB - 1Nos Outgoing: 1. 400A, 50kA, TP MCCB + NL- 6 Nos 2. 200A, 50kA, TP MCCB + NL - 7 Nos 3.250A TPN Isolator- 1No, Metering, indication and protection relays Others: 1. PLC - 1No 2. Control Wiring - 1 Lot 3.Electrical and Mechanical Interlocking arrangement - 1Set 4. Surge Protector - 1No 5. Master Relay - 1No

od219730/2024_2025 : SUB MAIN DISTRIBUTION BOARD (SMDB-CM) / (UPS O/P Panel ) Supply, installation, testing commissioning of Sub Main Distribution Panel Board with Isolator / MCCB incomer and MCCB outgoing. TPN switch gear shall be supplied with equally rated neutral link and all MCCBs shall be with rotary handle.The LT panel board fabricated using 16/14 SWG CRCA sheet, powder coated with two coats paint over two coats of zinc chromate primer, before painting the panel board shall be treated through 7-tank cold pre-treatment process, complete with all switch gears rotory handles, terminal spreader, shroud, Aluminium bus bars, SMC/FRP bus bar supports, PVC sleeve, dust tight doors with neoprene gasket, earthing the doors, Cable box with detachable gland plate, provision for supporting the cables, control wiring, metering, all protective relays, interlocks and instrumentation system suggested by Electrical inspectorate, etc. per detailed technical specifications consisting of the following 1. Busbars: 200A Al for Phase 200A AL for Neutral, 25X3 mm cu for Earth. 2. Incomer : 400A 4P Isolator - 1 No with RYB indicator 3. Outgoings 63A, 36kA, TP, MCCB + NL - 4Nos 80A, 36kA, TP, MCCB +NL- 2Nos 160A, 36kA, TP, MCCB +NL- 3Nos

od219732/2024_2025 : SUB MAIN DISTRIBUTION BOARD (CM-LDY) Supply, installation testing and commissioning of LT Floor mounted, compartmentalised dust and vermin proof, LT panel board fabricated using 16/14 SWG CRCA sheet, powder coated with two coats paint over two coats of zinc chromate primer, before painting the panel board shall be treated through 7-tank cold pre-treatment process, complete with all switch gears rotory handles, terminal spreader, shroud, Aluminium bus bars, SMC/FRP bus bar supports, PVC sleeve, dust tight doors with neoprene gasket, earthing the doors, Cable box with detachable gland plate, provision for supporting the cables, control wiring, metering, all protective relays, interlocks and instrumentation system suggested by Electrical inspectorate, etc. per detailed technical specifications consisting of the following .1. Busbars 200A Al for Phase 200A AL for Neutral, 25X3 mm cu for Earth. 2. Incomer : 200A 4P Isolator - 1 No with RYB Indicator 3. Outgoings 63A, 4P, C Curve, MCB - 8 Nos

od219744/2024_2025 : SUB MAIN DISTRIBUTION BOARD (CM-CSSD) Supply, installation testing and commissioning of LT Floor mounted, compartmentalised dust and vermin proof, LT panel board fabricated using 16/14 SWG CRCA sheet, powder coated with two coats paint over two coats of zinc chromate primer, before painting the panel board shall be treated through 7-tank cold pre-treatment process, complete with all switch gears rotory handles, terminal spreader, shroud, Aluminium bus bars, SMC/FRP bus bar supports, PVC sleeve, dust tight doors with neoprene gasket, earthing the doors, Cable box with detachable gland plate, provision for supporting the cables, control wiring, metering, all protective relays, interlocks and instrumentation system suggested by Electrical inspectorate, etc. per detailed technical specifications consisting of the following .Incomer: 200A 4P ISO Indication lamp with control fuse. Bus bars: 200A Al for Phase 200A AL for Neutral, 25X3 mm cu for Earth, Outgoings: 63A 4PC Curve, MCB - 8Nos

od219747/2024_2025 : SUB MAIN DISTRIBUTION BOARD (CM-PMP) Supply, installation testing and commissioning of LT Floor mounted, compartmentalised dust and vermin proof, LT panel board fabricated using 16/14 SWG CRCA sheet, powder coated with two coats paint over two coats of zinc chromate primer, before painting the panel board shall be treated through 7-tank cold pre-treatment process, complete with all switch gears rotory handles, terminal spreader, shroud, Aluminium bus bars, SMC/FRP bus bar supports, PVC sleeve, dust tight doors with neoprene gasket, earthing the doors, Cable box with detachable gland plate, provision for supporting the cables, control wiring, metering, all protective relays, interlocks and instrumentation system suggested by Electrical inspectorate, etc. per detailed technical specifications consisting of the following. Busbar160A Al for Phase 160A AL for Neutral, 25X3 mm cu for Earth. Incomer : 160A 4P Isolator - 1 No with RYB indicator Outgoings 63A, 4P, C Curve, MCB - 8Nos

od219751/2024_2025 : SUB MAIN DISTRIBUTION BOARD (CM-LFT) Supply, installation testing and commissioning of LT Floor mounted, compartmentalised dust and vermin proof, LT panel board fabricated using 16/14 SWG CRCA sheet, powder coated with two coats paint over two coats of zinc chromate primer, before painting the panel board shall be treated through 7-tank cold pre-treatment process, complete with all switch gears rotory handles, terminal spreader, shroud, Aluminium bus bars, SMC/FRP bus bar supports, PVC sleeve, dust tight doors with neoprene gasket, earthing the doors, Cable box with detachable gland plate, provision for supporting the cables, control wiring, metering, all protective relays, interlocks and instrumentation system suggested by Electrical inspectorate, etc. per detailed technical specifications consisting of the following Busbar 200A Al for Phase 200 A AL for Neutral, 25X3 mm cu for Earth. Incomer : 200 A 4P Isolator - 1 No with RYB indicator Outgoings 63A, 4P, C Curve, MCB - 8Nos

od219756/2024_2025 : LIFT PANEL Supply, installation testing and commissioning of LT Floor mounted, compartmentalised dust and vermin proof, LT panel board fabricated using 16/14 SWG CRCA sheet, powder coated with two coats paint over two coats of zinc chromate primer, before painting the panel board shall be treated through 7-tank cold pre-treatment process, complete with all switch gears rotory handles, terminal spreader, shroud, Aluminium bus bars, SMC/FRP bus bar supports, PVC sleeve, dust tight doors with neoprene gasket, earthing the doors, Cable box with detachable gland plate, provision for supporting the cables, control wiring, metering, all protective relays, interlocks and instrumentation system suggested by Electrical inspectorate, etc. per detailed technical specifications consisting of the following. Busbar 100A Al for Phase 100A AL for Neutral, 25X3 mm cu for Earth. Incomer : 63A 4P Isolator - 1 No with RYB indicator Outgoings 32A, 4P, RCBO, 300mA - 1No 25A, 2P, RCCO, 30mA - 1No 10A, 1P, B Curve, MCB - 4Nos

od219762/2024_2025 : SUB MAIN DISTRIBUTION BOARD (SMDB-xF) Supply, installation testing and commissioning of LT Floor mounted, compartmentalised dust and vermin proof, LT panel board fabricated using 16/14 SWG CRCA sheet, powder coated with two coats paint over two coats of zinc chromate primer, before painting the panel board shall be treated through 7-tank cold pre-treatment process, complete with all switch gears rotory handles, terminal spreader, shroud, Aluminium bus bars, SMC/FRP bus bar supports, PVC sleeve, dust tight doors with neoprene gasket, earthing the doors, Cable box with detachable gland plate, provision for supporting the cables, control wiring, metering, all protective relays, interlocks and instrumentation system suggested by Electrical inspectorate, etc. per detailed technical specifications consisting of the following Busbars: 400A Al for Phase 400A AL for Neutral, 25X3 mm cu for Earth. Incomer : 400A 4P Isolator - 1 No with RYB indicators Outgoings 63A, 36kA, TP MCCB + NL - 3Nos 160A, 36kA, TP MCCB + NL - 2Nos 200A, 36kA, TP MCCB + NL - 1Nos

od219765/2024_2025 : SUB MAIN DISTRIBUTION BOARD (SMDB-xF) Supply, installation, testing commissioning of Sub Main Distribution Panel Board with Isolator / MCCB incomer and MCCB outgoing. TPN switch gear shall be supplied with equally rated neutral link and all MCCBs shall be with rotary handle. Busbars: 200A Al for Phase 200A AL for Neutral, 25X3 mm cu for Earth. Incomer : 200A 4P Isolator - 1 No with RYB indicators Outgoings 63A, 36kA, TP MCCB + NL - 3Nos 160A, 36kA, TP MCCB + NL - 2 Nos 100A, 36kA, TP MCCB + NL - 1 Nos

od219768/2024_2025 : SUB MAIN DISTRIBUTION BOARD (SMDB-RDY) Supply, installation, testing commissioning of Sub Main Distribution Panel Board with Isolator / MCCB incomer and MCCB outgoing. TPN switch gear shall be supplied with equally rated neutral link and all MCCBs shall be with rotary handle. Busbars 400A Al for Phase 400A AL for Neutral, 25X3 mm cu for Earth. Incomer 400A 4P Isolator - 1 No with RYB indicators. outgoings100A, 36kA, TP MCCB + NL - 3Nos 200A, 36kA, TP MCCB + NL - 3Nos

od219774/2024_2025 : SUB MAIN DISTRIBUTION BOARD (SMDB-U-ISB) Supply, installation, testing commissioning of Sub Main Distribution Panel Board with Isolator / MCCB incomer and MCCB outgoing. TPN switch gear shall be supplied with equally rated neutral link and all MCCBs shall be with rotary handle. Busbars: 200A Al for Phase 200A AL for Neutral, 25X3 mm cu for Earth. Incomer : 200A 4P Isolator with RYB indictors - 1 No. Outgoings 100A, 36kA TP MCCB + NL - 3Nos 63A, 36kA TP MCCB + NL - 3Nos

od219777/2024_2025 : SUB MAIN DISTRIBUTION BOARD (SMDB-U-0SB) Supply, installation, testing commissioning of Sub Main Distribution Panel Board with Isolator / MCCB incomer and MCCB outgoing. TPN switch gear shall be supplied with equally rated neutral link and all MCCBs shall be with rotary handle. Busbars: 160A Al for Phase 160A AL for Neutral, 25X3 mm cu for Earth. Incomer : 160A, TPN Isolator with RYB indication lamp - 3Nos Outgoings:40A, 25kA TP C curve MCB - 8Nos

od219784/2024_2025 : SUB MAIN DISTRIBUTION BOARD (SMDB-U-VDBs) : Supply, installation, testing commissioning of vertical distribution board consisting of Incomer 63A, 4 P isolator - Outgoings32 A, 3 P MCB + NL - 8Nos

od219788/2024_2025 : SUB MAIN DISTRIBUTION BOARD (SMDB-P-xF) Supply, installation testing and commissioning of LT Floor mounted, compartmentalised dust and vermin proof, LT panel board fabricated using 16/14 SWG CRCA sheet, powder coated with two coats paint over two coats of zinc chromate primer, before painting the panel board shall be treated through 7-tank cold pre-treatment process, complete with all switch gears rotory handles, terminal spreader, shroud, Aluminium bus bars, SMC/FRP bus bar supports, PVC sleeve, dust tight doors with neoprene gasket, earthing the doors, Cable box with detachable gland plate, provision for supporting the cables, control wiring, metering, all protective relays, interlocks and instrumentation system suggested by Electrical inspectorate, etc. per detailed technical specifications consisting of the following Busbars: 160A Al for Phase 160A AL for Neutral, 25X3 mm cu for Earth. Incomer 160A 4P Isolator - 1 No Outgoings 63A, 4P, C Curve, MCB - 8Nos

od219792/2024_2025 : SUB MAIN DISTRIBUTION BOARD (SMDB-A-xF) Supply, installation testing and commissioning of LT Floor mounted, compartmentalised dust and vermin proof, LT panel board fabricated using 16/14 SWG CRCA sheet, powder coated with two coats paint over two coats of zinc chromate primer, before painting the panel board shall be treated through 7-tank cold pre-treatment process, complete with all switch gears rotory handles, terminal spreader, shroud, Aluminium bus bars, SMC/FRP bus bar supports, PVC sleeve, dust tight doors with neoprene gasket, earthing the doors, Cable box with detachable gland plate, provision for supporting the cables, control wiring, metering, all protective relays, interlocks and instrumentation system suggested by Electrical inspectorate, etc. per detailed technical specifications consisting of the following Incomer 200A 4P Isolator - 1 No Busbars: 200A Al for Phase 100A AL for Neutral, 25X3 mm cu for Earth. RYB Indicator. Outgoings 63A, 4P, C Curve, MCB - 8Nos

od219794/2024_2025 : APFC Panel 300 KVAR:SITC of 12 Stage Automatic Power Factor Correction Panel made of 14/16SWG thick CRCA sheet fully compartmentalized, dust and vermin proof, degreased, pickling, zinc phosphate and powder coating painted with approved colour and quality, complete with hinged and earthed front doors, name plate, danger notice board, heavy duty neoprene gaskets, removable gland plates made of 3mm thick sheet steel boards with 500V, APPH, Heavy Duty Capacitor and 7% detuned reactors, Capacitor Duty contactor and microprocessor based APFC Relay in steps of 12 with all required accessories. Including capacitor duty contactor, auxiliary contactor, (2 no+ 2nc), auxiliary contactor add on, (2 no+ 2nc), fan, air vent, auto manual ON/OFF indication switch, cooling fan etc. Incomer: 400A 4P Isolator - 1 No microprocessor based APFC Relay (12 Steps) - 1No, 400/5A, CL- 1, CT, 10VA; 3 Nos, Multi-function digital meter - 1Set, RYB Indication Lamp - 1Set ;Bus bars: 400 A Al bus bar, Cu Earth bus. Outgoings: 1)125 A TP SFU + 125 A -cap duty contactor + 50 KVAR cap+ 7% detuned reactor-3 set. 2) 63A TP SFU + 63 A -cap duty contactor + 25 KVAR cap+ 7% detuned reactor-3 set. 3) 32A TP SFU + 32 A -cap duty contactor + 10 KVAR cap+ 7% detuned reactor-2 set. 4)32A TP SFU + 32 A -cap duty contactor + 5 KVAR cap+ 7% detuned reactor-1 set.On/off indications for all capacitor bank(one number 50kVAR as fixed capacitor)

DISTRIBUTION BOARDS/ RCCB/ ISOLATORS/ MCBs

2.3.1 : Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator6 way, Double door

2.3.2 : Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator8 way, Double door

2.3.3 : Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator12 way, Double door

2.4.1 : Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)4 way (4 + 12), Double door

2.4.2 : Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)6 way (4 + 18), Double door

2.4.3 : Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)8 way (4 + 24), Double door

2.5.1 : Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's (but without MCB's and incomer ) as required .(Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)4 way (4 + 12), Double door

2.5.2 : Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's (but without MCB's and incomer ) as required .(Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)8 way (4 + 24), Double door

2.5.3 : Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's (but without MCB's and incomer ) as required .(Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)12 way (4 + 36), Double door

2.10.1 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole

2.10.3 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Double pole

2.10.4 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Triple pole

2.10.5 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Triple pole and neutral

2.12.1 : Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

2.12.2 : Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps

2.13.1 : Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

2.13.2 : Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps

2.13.3 : Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.100 amps

2.14.1 : Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.25 amps

2.14.2 : Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

2.15.1 : Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.25 amps

2.15.2 : Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

2.15.3 : Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps

2.23.4 : Supplying and fixing Cable End Box (Loose Wire Box) (IP 43) suitable for following single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with testing and commissioning etc. as required. 2For 14 way, Double door SPN MCBDB

2.24.1 : Supplying and fixing Cable End Box (Loose Wire Box) (IP 43) suitable for following triple pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with testing and commissioning etc. as required.For 4 way, Double door TPN MCBDB

2.24.2 : Supplying and fixing Cable End Box (Loose Wire Box) (IP 43) suitable for following triple pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with testing and commissioning etc. as required.For 6 way, Double door TPN MCBDB

2.24.3 : Supplying and fixing Cable End Box (Loose Wire Box) (IP 43) suitable for following triple pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with testing and commissioning etc. as required.For 8 way, Double door TPN MCBDB

od219807/2024_2025 : Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, RCBO, in the existing MCB DB complete with connections, testing and commissioning etc. as required. 100 mA 32 amps

od219808/2024_2025 : Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, RCBO, in the existing MCB DB complete with connections, testing and commissioning etc. as required. 100 mA 40 amps

od219809/2024_2025 : Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, RCBO, in the existing MCB DB complete with connections, testing and commissioning etc. as required. 100 mA 63 amps

od219811/2024_2025 : Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, RCCB, in the existing MCB DB complete with connections, testing and commissioning etc. as required. 100 mA 32 amps

od219813/2024_2025 : Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, RCCB, in the existing MCB DB complete with connections, testing and commissioning etc. as required. 100 mA 40 amps

od219814/2024_2025 : Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, RCCB, in the existing MCB DB complete with connections, testing and commissioning etc. as required. 100 mA 63 amps

2.11 : Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.

1.26 : Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

LT CABLES

od219721/2024_2025 : Supply, testing and commissioning of the following size 1.1kV grade (AYWY/AYFY) / (XLPE) insulated PVC sheathed, armoured Aluminium conductor power LT cable confirming to IS 7098 (part 1) ammended upto date.1 X 3.5C X 400 Sqm

od219731/2024_2025 : Supply, testing and commissioning of the following size 1.1kV grade (AYWY/AYFY) / (XLPE) insulated PVC sheathed, armoured Aluminium conductor power LT cable confirming to IS 7098 (part 1) ammended upto date.1 x 3.5C x 300 Sq.mm.

od219735/2024_2025 : Supply, testing and commissioning of the following size 1.1kV grade (AYWY/AYFY) / (XLPE) insulated PVC sheathed, armoured Aluminium conductor power LT cable confirming to IS 7098 (part 1) ammended upto date.1 x 3.5C x 240 Sq.mm.

od219745/2024_2025 : Supply, testing and commissioning of the following size 1.1kV grade (AYWY/AYFY) / (XLPE) insulated PVC sheathed, armoured Aluminium conductor power LT cable confirming to IS 7098 (part 1) ammended upto date.1 x 3.5C x 185 Sq.mm.

od219749/2024_2025 : Supply, testing and commissioning of the following size 1.1kV grade (AYWY/AYFY) / (XLPE) insulated PVC sheathed, armoured Aluminium conductor power LT cable confirming to IS 7098 (part 1) ammended upto date.1 x 3.5C x 150 Sq.mm.

od219752/2024_2025 : Supply, testing and commissioning of the following size 1.1kV grade (AYWY/AYFY) / (XLPE) insulated PVC sheathed, armoured Aluminium conductor power LT cable confirming to IS 7098 (part 1) ammended upto date.1 x 3.5C x 120 Sq.mm.

od219758/2024_2025 : Supply, testing and commissioning of the following size 1.1kV grade (AYWY/AYFY) / (XLPE) insulated PVC sheathed, armoured Aluminium conductor power LT cable confirming to IS 7098 (part 1) ammended upto date.1 x 3.5C x 95 Sq.mm.

od219760/2024_2025 : Supply, testing and commissioning of the following size 1.1kV grade (AYWY/AYFY) / (XLPE) insulated PVC sheathed, armoured Aluminium conductor power LT cable confirming to IS 7098 (part 1) ammended upto date.1 x 3.5C x 70 Sq.mm.

od219766/2024_2025 : Supply, testing and commissioning of the following size 1.1kV grade (AYWY/AYFY) / (XLPE) insulated PVC sheathed, armoured Aluminium conductor power LT cable confirming to IS 7098 (part 1) ammended upto date.1 x 3.5C x 50 Sq.mm.

od219769/2024_2025 : Supply, testing and commissioning of the following size 1.1kV grade (AYWY/AYFY) / (XLPE) insulated PVC sheathed, armoured Aluminium conductor power LT cable confirming to IS 7098 (part 1) ammended upto date.1 x 3.5C x 35 Sq.mm.

od219775/2024_2025 : Supply, testing and commissioning of the following size 1.1kV grade (AYWY/AYFY) / (XLPE) insulated PVC sheathed, armoured Aluminium conductor power LT cable confirming to IS 7098 (part 1) ammended upto date.1 x 3.5C x 25 Sq.mm.

od219776/2024_2025 : Supply, testing and commissioning of the following size 1.1kV grade (AYWY/AYFY) / (XLPE) insulated PVC sheathed, armoured Aluminium conductor power LT cable confirming to IS 7098 (part 1) ammended upto date.1 x 4C x 16 Sq.mm.

od219785/2024_2025 : Supply, testing and commissioning of the following size 1.1kV grade (AYWY/AYFY) / (XLPE) insulated PVC sheathed, armoured Aluminium conductor power LT cable confirming to IS 7098 (part 1) ammended upto date.1 x 4C x 10 Sq.mm.

od219787/2024_2025 : Supply, testing and commissioning of the following size 1.1kV grade (AYWY/AYFY) / (XLPE) insulated PVC sheathed, armoured Aluminium conductor power LT cable confirming to IS 7098 (part 1) ammended upto date.1 x 4C x 6 Sq.mm.

od219790/2024_2025 : Supply, testing and commissioning of the following size 1.1kV grade (AYWY/AYFY) / (XLPE) insulated PVC sheathed, armoured Aluminium conductor power LT cable confirming to IS 7098 (part 1) ammended upto date.1 x 4C x 4 Sq.mm.

od219796/2024_2025 : Supply testing and commissioning of the single core FR PVC insulated Armoured Copper Cable for working voltage upto and including 1100 V 1 x 4C x 2.5 Sq.mm.

od219797/2024_2025 : Supply testing and commissioning of the single core FR PVC insulated Armoured Copper Cable for working voltage upto and including 1100 V 1x 3C x 2.5 Sq.mm.

od219800/2024_2025 : Supply testing and commissioning of the single core FR PVC insulated Armoured Copper Control Cable for working voltage upto and including 1100 V 12C x 1.5 Sq.mm

LT CABLE LAYING END TERMINATION

7.1.1 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.Upto 35 sq. mm

7.1.2 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.Above 35 sq. mm and upto 95 sq. mm

7.1.3 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.Above 95 sq. mm and upto 185 sq. mm

7.1.4 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.Above 185 sq. mm and upto 400 sq. mm

7.5.1 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.Upto 35 sq. mm

7.5.2 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.Above 35 sq. mm and upto 95 sq. mm

7.5.3 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.Above 95 sq. mm and upto 185 sq. mm

7.5.4 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.Above 185 sq. mm and upto 400 sq. mm

7.7.1 : Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.Upto 35 sq. mm (clamped with 1mm thick saddle)

7.7.2 : Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp)

7.7.3 : Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.Above 95 sq. mm and upto 185 sq. mm (clamped with 25/40x3mm MS flat clamp)

7.7.4 : Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.Above 185 sq. mm and upto 400 sq. mm (clamped with 40x3mm MS flat clamp)

7.8.1 : Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.Upto 35 sq. mm (clamped with 1mm thick saddle)

7.8.2 : Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp)

7.8.3 : Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.Above 95 sq. mm and upto 185 sq. mm (clamped with 25/40x3mm MS flat clamp)

7.8.4 : Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.Above 185 sq. mm and upto 400 sq. mm (clamped with 40x3mm MS flat clamp)

7.9 : Supplying and making cable route marker with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) of size 60 cm X 60 cm at the bottom and 50 cm X 50 cm at the top with a thickness of 10cm including inscription duly engraved as required.

9.1.31 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 400 sq. mm (82mm)

9.1.30 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 300 sq. mm (70mm)

9.1.29 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 240 sq. mm (62mm)

9.1.27 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 185 sq. mm (57mm)

9.1.26 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2 X 150 sq. mm (50mm)

9.1.25 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2 X 120 sq. mm (45mm)

9.1.24 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 95 sq. mm (45mm)

9.1.23 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 70 sq. mm (38mm)

9.1.22 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2 X 50 sq. mm (35mm)

9.1.21 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 35 sq. mm (32mm)

9.1.20 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X25 sq.mm (28mm)

9.1.33 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 16 sq. mm (28mm)

9.1.32 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 10 sq. mm (25mm)

od219810/2024_2025 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 1x 4C x 6 Sq.mm.

od219812/2024_2025 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 1x 4C x 4 Sq.mm.

od219815/2024_2025 : Supply of all materials and termination of the following FR PVC insulated flexible copper cable using single compression type cadmium plated brass cable glands, Copper crimped type cable lugs, cable identification tags and including gland earthing using copper conductor of adequate size , AL-CU strip for termination of Cables etc. -1x 4C x 2.5 Sq.mm.

od219816/2024_2025 : Supply of all materials and termination of the following FR PVC insulated flexible copper cable using single compression type cadmium plated brass cable glands, Copper crimped type cable lugs, cable identification tags and including gland earthing using copper conductor of adequate size , AL-CU strip for termination of Cables etc.-1x 3C x 2.5 Sq.mm.

od219817/2024_2025 : Supply of all materials and termination of the following FR PVC insulated flexible copper cable using single compression type cadmium plated brass cable glands, Copper crimped type cable lugs, cable identification tags and including gland earthing using copper conductor of adequate size , AL-CU strip for termination of Cables etc. -12C x 1.5 Sq.mm

CONDUIT LAYING AND WIRING DEVICES AND ACCESSORIES

1.20.1 : Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required.20 mm

1.20.2 : Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required.25 mm

1.20.3 : Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required.32 mm

1.20.4 : Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required.40 mm

1.22.11 : Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required.200 mm X 150 mm X 100 mm deep

1.22.16 : Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required.250 mm X 300 mm X 100 mm deep

1.24.1 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 amps switch

1.24.2 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.2 way 5/6 amps switch

1.24.3 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.15/16 amp switch

1.24.4 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.3 pin 5/6 amp socket outlet

1.24.5 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.6 pin 15/16 amp socket outlet

od219779/2024_2025 : Supplying and fixing following modular switch/ socket on the existing modular plate switch box including connections but excluding modular plate etc. as required. 2/3 Plate Ceiling Rose

od219783/2024_2025 : Supplying and fixing following modular switch/ socket on the existing modular plate switch box including connections but excluding modular plate etc. as required. 5/16 amps switch with indicator ( For ICU / ward/ Anasthesia room / Other approved area )

od219789/2024_2025 : Supplying and fixing brass batten/ angle holder including connection etc. as required.

1.25 : Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

1.27.1 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.1 or 2 Module (75mmX75mm)

1.27.2 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.3 Module (100mmX75mm)

1.27.3 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.4 Module (125mmX75mm)

1.27.4 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.6 Module (200mmX75mm)

1.27.5 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.8 Module (125mmX125mm)

1.27.6 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.12 Module (200mmX150mm)

1.31 : Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in non residential buildings).

od219805/2024_2025 : Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.

1.56 : Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess, including providng and fixing 2 Nos. 3 pin 5/6 A modular socket outlets and 2 Nos. 5/6 A modular switches, connection etc. as required. (For light plugs to be used in non residential buildings).

CEILING FAN / EXHAUST FANS

od219725/2024_2025 : Supply of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, power factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.

od219726/2024_2025 : Supply, installation, testing commissioning of 300mm sweep heavy duty exhaust fan in metal frame working on 230V A/C.The work shall include making the holes suitable for the size of fan, fixing necessary bolt and nuts making good the damages, etc. and giving connection with required length of 1.5sq.mm., 3 core PVC insulated and PVC sheathed copper conductor flexible wire conforming to ISS, etc. as required.

od219733/2024_2025 : Supply installation of wall fan, 450 mm sweep, 230V, 1Ph, plastic body and blades, pull cord for speed regulation, thermal overload protection for motor, min speed (rpm) & 1200, min air delivery (CMM) & 75 complete with all mounting accessories as required.

CABLE TRAYS

4.1.2 : Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.150 mm width X 50 mm depth X 1.6 mm thickness

4.1.4 : Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.300 mm width X 50 mm depth X 1.6 mm thickness

4.1.6 : Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.450 mm width X50 mm depth X 2.0 mm thickness

4.1.7 : Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.600 mm width X 50 mm depth X 2.0 mm thickness

WIRING IN PVC CONDUITS

1.10.3 : Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group C

1.11 : Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.

1.55.3 : Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.Group C

15.1 : Supplying,Installation, testing and commissioning of Passive Infrared (PIR) technology based occupancy sensor having high preformance, non regulating programmable type, suitable for connected load upto 10 Amp, for mounting height up to 2.8 Mtr and for 5 m diameter coverage area along with necessary fixing arrangements i/c programming and site etc. complete as required

od219750/2024_2025 : Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm in existing PVC conduit (in slab only), with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required. (All light points in common areas and above 2 lamps controlled by 1 switch shall be measured in circuit running meter measurement only) Group C

1.14.1 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2x1.5 sq.mm + 1x1.5 sq.mm earth wire

1.14.2 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

1.14.3 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2 X 4 sq. mm + 1 X 4 sq. mm earth wire

1.14.4 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2 X 6 Sq.mm + 1 x 6 sq.mm earth wire

1.14.5 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2 X 10 sq. mm + 1 X 6 sq. mm earth wire

1.17.3 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 X 1.5 sq.mm

1.17.12 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 2.5 sq. mm

1.17.21 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 4 sq. mm

EARTHING

5.2 : Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required

5.6 : Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

od219736/2024_2025 : Supply and installation charges for Providing 1200x 1200x12 mm Cast Iron plate earth station, conforming to IS 3043 filling with mixtures of salt, sand and charcoal, construction of earth chamber with brick masonry and covering with heavy duty Cast Iron Cover hinged to Cast Iron Frame, including excavation backfilling of earth pit.

od219741/2024_2025 : Supplying and laying 40mm x6mm copper strip at 0.50 metre below ground as strip earth electrode,including connection / terminating with nut,bolt,spring,washer etc.as required.(jointing shall be done by overlapping and with 2 sets of brass nut bolt amp; spring washer spaced at 50mm)

5.8 : Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm)

5.14 : Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.

od219754/2024_2025 : Providing and fixing 25mm x 3mm copper strip on surface or in recess for connections etc as required.

od219763/2024_2025 : Providing and fixing 32mm x 6mm copper strip on surface or in recess for connections etc as required.

90.16.1.8 : Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required

5.19 : Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.

od219773/2024_2025 : Providing and fixing 10 SWG dia Copper wire on surface or in recess for loop earthing as required.

od219780/2024_2025 : Providing and fixing earth bus of 50mm x 5mm copper strip on surface for connections etc as required.

LIGHTINING PROTECTION

6.7 : Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For horizontal run)

6.8 : Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For vertical run)

6.14 : Providing and laying G.l. tape 32 mm X 6 mm from earth. electrode directly in ground as required.

od219740/2024_2025 : Providing and fixing testing joint, made of 25 mm X 3 mm thick G.I. strip, 125 mm long, with 4 Nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required.

90.9.1.1 : Supply and fixing 50 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recess including cutting the wall and making good the damages in case of recessed installation as required.

90.9.2.1 : Supply and fixing 100 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recess including cutting the wall and making good the damages in case of recessed installation as required.

POWER SOCKETS

od219720/2024_2025 : POWER SUPPLY FOR MECHANICAL EQUIPMENT Supply and installation of disconnect switches (isolators) in metallic enclosures to provide power supply to mechanical equipment. 40A TPN Isolator

2.18 : Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet, with 2 pole and earth,metal enclosed plug top along with 20 amps "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.

2.19 : Supplying and fixing 20 amps 415volts, TPN industrial type, socket outlet, with 4 pole and earth, metal enclosed plug top along with 20 amps "C" curve, TPMCB, in sheet enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.

LIGHTING FIXTURES

od219724/2024_2025 : Supply and fixing 20W IP20 High efficient 1.2m long LED batten surface/wall mounted Specially designed Co-extruded channel in thermally conductive material with plastic with HET diffuser. In-built electronic driver duly wired up to terminal block. CRI greater than or equal to 80, Temperature range-0 to 50DegC, Driver efficiency g85%, Power factorgreater than or equal;0.9, CT - 6500K, THDlt;20%, Surge protection 2kV, 30000 burning hours Luminaire lumen 2200 lumens (110 lm/W).

od219727/2024_2025 : Supply and fixing of 15/18W, IP20,LED Recess /surface mounted Round downlighter with Maximum system wattage of 18 W, System efficency 100lm/W and minimum system lumen output 1200 lm, White powder coated, pressure die cast aluminium housing. Luminaire shall use SMD type LED with CRI more than 80, THD less than 10% with PF more than 0.95 with inbuilt Surge Protection of 2.5KV.

od219734/2024_2025 : Supply and fixing of 12W, IP20,LED Recess /surface mounted Round downlighter with Maximum system wattage of 12 W, System efficency 100lm/W and minimum system lumen output 1200 lm, White powder coated, pressure die cast aluminium housing. Luminaire shall use SMD type LED with CRI more than 80, THD less than 10% with PF more than 0.95 with inbuilt Surge Protection of 2.5KV.

od219743/2024_2025 : Supply and fixing 24W, 220x220mm, IP20, LED surface/Recess mounted down light with Maximum system wattage of 24 W, System efficiency 100 lm/W and minimum system lumen output 2400 lm, White powder coated, pressure die cast aluminium housing. Luminaire shall use SMD type LED with CRI more than 80, THD less than 10% with PF more than 0.95 with inbuilt Surge Protection of 2.5KV.

od219748/2024_2025 : Supply and fixing of 2X2, LED Recessed mount down light with 30W/36W with System efficiency of more than 100 lm/W and Translucent frosted diffuser for Uniform illumination and wider light distribution. The LED shall be compliant with life of 50000 Hrs tested at maximum current (Complete LM 80 test report for LED should be submitted for 10000 hrs of testing). The LEDs used should be with CT of 5700k and CRI of Minimum 80. LED Driver shall be Multistage, Isolated type, Constant Current topology driver with proper heat sink for heat dissipation suitable to operate in input voltage range of 140V to 270V.

od219753/2024_2025 : Supply and fixing of 6W, IP20,LED Recess /surface mounted Round downlighter with Maximum system wattage of 6 W, System efficency 100 lm/W and minimum system lumen output 1200 lm, White powder coated, pressure die cast aluminium housing. Luminaire shall use SMD type LED with CRI more than 80, THD less than 10% with PF more than 0.95 with inbuilt Surge Protection of 2.5KV.

od219757/2024_2025 : Supply and fixing of 10W IP20 High efficient 0.6m long LED batten surface/wall mounted Specially designed Co-extruded channel in thermally conductive material with plastic with HET diffuser. In-built electronic driver duly wired up to terminal block.IP20, CRI greater than or equal;80, Temperature range-0 to 50DegC, Driver efficiencygreater than or equal;85%, Power factor 0.95, CCT - 6500K, THDlt;20%, Surge protection 2kV, 30000 burning hours Luminaire lumen 1000 lumens (100lm/W).

od219761/2024_2025 : Supply of Integral, SMD LED, IP 66, 9W, LED Surface mounted Die cast Alumium Bulk head fixture with System efficacy of more than 70 lm/W. Luminaire shall have Polycarbonate high transmitivity diffuser for Uniform illumination and wider light distribution. LED luminaire shall have specially design aluminum heat sink for excellent heat dissipation, good air circulations as well as very light weight.The luminaire should have inbuilt SPD -2.5KV with CRI more than 70, Power factor 0.95 , THD less than 10%.

od219767/2024_2025 : Supply and installation of recess mounted, 30-36W LED Cleanroom luminaire (2x2 feet), powder coatedCRCA housing, high efficiency translucent diffuser including all necessary mounting accessories, flexibleconduit and connection wire etc with following minimum requirements:- IP65, CRI & 80, p.f & 0.9, min.service life of LED - 50000 hours, Luminous efficacy & 100 Lm/W, Surge protection of min 2kV, THD lt;10%, comply IEC 62471 for LED etc with all necessary accessories as required.

od219770/2024_2025 : Supply and fixing of weather proof, 3D signage board 1m height and 4 m wide fabricated with Angle iorn strucure and 14SWG CRCA sheet, fixing of 3D, letters made using 2mm thick acrylic sheet, each lettee is illuminated with sufficient LED rope including 12V dc power controller for LED ( each letter consist two layer LED as aproved

od219778/2024_2025 : Supply and installation of 30W street light including 32 mm GI pipe ,1.5 meter for support -Garnet LED Light Cool White and all accessories for complete.

MISCELLANEOUS ITEMS

14.14.2 : Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc as required.150 mm dia

14.14.4 : Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc as required.300 mm dia

14.16.3 : 120 mm dia (OD-120 mm & ID-103 mm nominal)

14.16.5 : Supplying and laying of following size DWC HOPE pipe lSI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 em below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc. , complete as required.200 mm dia (OD-200 mm & ID-175 mm nominal)

90.11.1.19 : Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required

90.11.1.20 : Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required

od219755/2024_2025 : Supplying and fixing extra down rod of 30 cm length MS pipe, 15 mm dia, heavy gauge including painting etc. as required. (Note: More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored).

od219759/2024_2025 : Supply and fixing of 40/63 A ,100 mA ELCB in suitable size outdoor weather proof- IP66 sheet steel powder coated enclosure with door interlock facility on surface confirming with all accesories,space for termination of cables, connections, testing and commissioning etc as required and as instructed by engineer in charge also making good any damages made during installation.

od219764/2024_2025 : Supply and fixing of following isolators in sheet steel powder coated enclosure with space for loose cable and door interlock facility on surface confirming to IEC 60947-3 complete with all accesories, connections, testing and commissioning etc as required and as instructed by engineer in charge also making good any damages made during installation.;63A TPN Isolator

od219771/2024_2025 : Supply and fixing of following isolators in sheet steel powder coated enclosure with space for loose cable and door interlock facility on surface confirming to IEC 60947-3 complete with all accesories, connections, testing and commissioning etc as required and as instructed by engineer in charge also making good any damages made during installation.;100A TPN Isolator.

od219772/2024_2025 : Supply and fixing of following isolators in sheet steel powder coated enclosure with space for loose cable and door interlock facility on surface confirming to IEC 60947-3 complete with all accesories, connections, testing and commissioning etc as required and as instructed by engineer in charge also making good any damages made during installation.;32A TPN Isolator.

od219781/2024_2025 : Supply and fixing of following isolators in sheet steel powder coated enclosure with space for loose cable and door interlock facility on surface confirming to IEC 60947-3 complete with all accesories, connections, testing and commissioning etc as required and as instructed by engineer in charge also making good any damages made during installation.;32A DP Isolator.

od219782/2024_2025 : Supply and fixing of following isolators in sheet steel powder coated enclosure with space for loose cable and door interlock facility on surface confirming to IEC 60947-3 complete with all accesories, connections, testing and commissioning etc as required and as instructed by engineer in charge also making good any damages made during installation.;400A TPN Isolator.

od219786/2024_2025 : Supply and installation of elastomer mat with ISI mark suitable for 11 KV,2.5mm THICK installation conforming to IS:15652:2006

od219791/2024_2025 : Supply and installation of 2nos fire buckets along with stand painted with enamel paint of red colour.

od219793/2024_2025 : Supply and installation of emergency OFF trip push button with front Glass and painted in RED Colour.

od219795/2024_2025 : Supply and Installation of Cable route marker for HT UG Cable at every 10m interval made of Cast Iron ( 152mm Round )

od219798/2024_2025 : Supply and fixing CO2 type 4.5KG capacity trolley mounted fire extinguishers as appoved by ISI complete as required

od219799/2024_2025 : Supply and installation of Danger board as required by the electrical authorities.

od219801/2024_2025 : Supply and installation of Laminated copies of Approved/ as built schemes and drawings in electrical room

od219802/2024_2025 : Supply of Insulated hand gloves IS 4770/1991

od219803/2024_2025 : Supply, Installation, Testing and Commissioning of Aviation Lamp (LED type )

od219804/2024_2025 : Supply fabrication, painting with two coats of synthetic enamel paint over a coat of zink chromate primer and erection of MS structural steel ( Angle iron/ flats/T section) for supporting the equipments, exhaust line etc complete.

od219806/2024_2025 : Supply and fixing of outdoor terminal box(syntex type) Suitable for fixing Isolators/ circuit brakers (GS-JB-3126) complete with all accesories, connections, testing and commissioning etc as required and as instructed by engineer in charge also making good any damages made during installation Size:250X250X155

EXTRA LOW VOLTAGE SYSTEMS (ELV)

1.21.1 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm

1.21.2 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm

1.21.3 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.32 mm

1.21.4 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.40 mm

1.21.5 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.50 mm

4.6.2 : Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.150 mm width X 50 mm depth X 1.6 mm thickness

4.6.4 : Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.300 mm width X 50 mm depth X 1.6 mm thickness

4.6.6 : Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.450 mm width X 50 mm depth X 2.0 mm thickness

1.53.1 : Supplying and drawn of UTP 4 pair CAT 6 LAN cable in the existing surface/recessed steel/PVC conduit as required1 run of Cable

1.53.2 : Supplying and drawn of UTP 4 pair CAT 6 LAN cable in the existing surface/recessed steel/PVC conduit as required2 run of Cable

1.53.3 : Supplying and drawn of UTP 4 pair CAT 6 LAN cable in the existing surface/recessed steel/PVC conduit as required3 run of Cable

od220710/2024_2025 : Supply and fixing of GI modular box including modular face plates, fixing of RJ 45 outlets and termination of Cat 6 cables on the outlets

od220711/2024_2025 : Supply installation testing and commissioning of 24 Port fully-loaded patch panel with necessary mechanical supports

od220712/2024_2025 : Supply, installation, testing, and commissioning of 24 ports 10G SFP+ + 4 ports 100G QSFP28 Ports L3 Managed Switch - Core Switch with all required accessories.

od220713/2024_2025 : Supply, installation, testing and commissioning of 20 10/100/1000 BASE-T ports + 4port 1G SFP ports,+ 4 10GSFP+ ports L3 Stackable Managed Switch - Core Switch with all required accessories.

od220714/2024_2025 : Supply fixing of 10G SFP+ Module to L3 Stackable Managed Switch

od220715/2024_2025 : Supply, installation, testing commissioning of PATCH CORD LC-SC SM DUPLEX LENGTH- 1m with all required accessories.

od220716/2024_2025 : Supply, installation, testing commissioning of PIGTAIL SC SM SIMPLEX LENGTH- 1m with all required accessories.

od220717/2024_2025 : Supply installation testing and commissioning of 42U Rack 1000 mm Depth with cable manager and all other accessories

od220718/2024_2025 : Supply installation testing and commissioning of 22 U Rack 600 mm depth with cable manager and all other accessories

od220719/2024_2025 : Supply and laying of Fiber Optic Cable 6 core SM Indoor / Outdoor Cable through the existing PVC conduit including splicing and termination at both ends

od220720/2024_2025 : Providing and termination of LIU 12 Port Rackmount Blank with Splice Tray and Cable spool (SC) SM and including all accessories like pigtails, sleeves, etc.

od220721/2024_2025 : Providing LIU 24 Port Rackmount .with modules splice Tray and Cable spool (SC) SM and including all accessories like pigtails, sleeves, etc.

od220722/2024_2025 : 1x6 SC Adaptor Module Panel - Simplex and including all accessories like pigtails, sleeves, etc.

od220723/2024_2025 : 1x24 SC Adaptor Module Panel with modules- Simplex and including all accessories like pigtails, sleeves, etc.

od220724/2024_2025 : 50pair Krone module fixed in box

od220725/2024_2025 : Supply, laying, and termination of 10 pair telephone cable, 0.5mm copper PVC insulated, unarmoured telephone cable drawn in the existing cable tray

od220726/2024_2025 : Supply, laying, and termination of 10-pair telephone terminal block housed in engineering plastic box with transparent hinged door

od220728/2024_2025 : Supply installation testing and commissioning of Indoor UL Listed, 3.6mm lens of 4 MP, H.264 compression, 120db WDR, ONVIF2.0, IR day and night Dome Color Camera with POE with prooper mechanical fixures on wall/slab/ recess etc

od220729/2024_2025 : Supply installation testing and commissioning of Outdoor UL Listed, 2.7-12mm motorized vari-focal lens of 4 MP, H.264 compression, 120db WDR, ONVIF2.0, IR day and night Bullet Color Camera with POE with prooper mechanical fixures on wall/slab/ recess etc

od220730/2024_2025 : Outdoor PTZ camera (add spec) with Pole

od220731/2024_2025 : Supply,installation, testing and commissioning of IP Network Video Recorders 32 channel with, 4 SATA Each support UP TO 8 TB, audio 1 input 1 output, video 1 HDMI 1 VGA, recording resolution 8 MP/6 MP/5MP/3MP/1080P, 720P/ D1 @ 30 fps, network throughput 200 Mbps from IPC and 200 Mbps to Client, Smart search supported, Remote access by DDNS P2P, 4 channel alarm input and 2 channel relay output, 2 USB ports, ONVIF, UL CE certified.

od220732/2024_2025 : Supply, installation, testing and commissioning of 24 Port GIGA POE switch with 2 SFP Module.

od220733/2024_2025 : Supply, installation, testing and commissioning of 8 port- PoE switch with 2 SFP Module

od220734/2024_2025 : Supply, installation, testing and commissioning of Patch Panel UTP Keystone- 24 Port- Fully loaded (,Cat 6 Cat 6 A )

od220735/2024_2025 : Supply and installation of Cat 6 UTP patch cord, 1 mtr

od220736/2024_2025 : Supply, installation, testing and commissioning of Server PC, Intel i7 processor, 24 inch LED monitor, Gigabit LAN port, USB port, 16 GB DDR3 RAM,1TB HDD,1GB dual graphic card, 100/1000 LAN ports, optical mouse, Keyboard, DVD Writer. Genuine Win 8.1 Pro - Down grade to Win 7 professional, 24 inch LED monitor

od220737/2024_2025 : Supply, installation, testing and commissioning of Professional Joystick designed for Surveillance application as compatible with the above mentioned system. UL+CE+FCC certification minimum.

od220738/2024_2025 : Supply, installation, testing and commissioning of Surveillance / SATA compatible Hard Disk of 6 TB capacity to achieve the total storage for the NVR server

od220739/2024_2025 : Supply, Installation, Testing Commissioning of 55 inch full HD LED monitor with resolution 1920X1080 pixel including wall mounting

od220740/2024_2025 : Supply and installation of wall mounted 12U rack including cable manager, power supply units etc.to accommodate ehternet switch and fiber patch panel at each floor

od220741/2024_2025 : Supply and installation of wall mounted 22U rack including cable manager, power supply units etc.to accommodate NVR, ethernet switch patch panel etc in control rooom

od220742/2024_2025 : High Fidility Ceiling Speakers with matching transformers, back boxes and accessories

od220743/2024_2025 : High Fidility Wall-mounted Speakers with matching transformers, back boxes and accessories

od220744/2024_2025 : Speaker Circuit wiring - 2core 24/0.2mm ATC twin twisted shielded, FRLS type, armoured cable (Green colour) to be drawn in existing surface/recessed steel/PVC conduit as required

od220745/2024_2025 : Supply, installation, testing and commissioning of Voice alarm Router to expand the Plena Voice Alarm System with six zones. EN 5416 certified.12 additional input contacts Six volume override output contacts. Supervision within the Plena Voice Alarm System Router.

od220747/2024_2025 : Supply, installation, testing and commissioning of Booster Amplifier 500 W

od220748/2024_2025 : Supply, installation, testing amp; commissioning of DVD player for background Music

od220749/2024_2025 : Supplying and drawing co-axial RG-11 copper cable in the existing surface/recessed steel/ pvc/hdpe conduit as required.

od220750/2024_2025 : Cable TV connection from operator which includes supply, installation, testing and commissioning of all accessories (including the set top box, antenna, amplifier whichever is required) for making the cable TV connection to the Television point

od220751/2024_2025 : Supply, Installation, Testing and Commissioning of 55 inch LED SMART TV with necessary supports/stands etc. complete.

od220752/2024_2025 : Supply, Installation, Testing and Commissioning of 40 inch LED SMART TV with necessary supports/stands etc. complete

od220753/2024_2025 : Supply, Installation, Testing and Commissioning of 32 inch LED SMART TV with necessary supports/stands etc. complete.

od220754/2024_2025 : Supply of smart cards for the access.

od220755/2024_2025 : Supply installation testing and commissioning of Proximity card readers

od220756/2024_2025 : Supply, installation, testing and commissioning of 4 Door / 8 Reader Controller: Supports access control of up to 4 doors in all respect including 4 entry readers, 4 exit readers, 4 locks, 4 exit switches etc. Inbuilt RJ45 Network Interface: Leveraging on the merits of IP based systems; it can easily be hooked up on the existing TCP/IP network. Thus the data can be transferred instantaneously in real time mode to a centralized server. Field Upgradable Firmware: Facility to onsite upgrade the firmware over Ethernet interface so that any customization or new version can be easily upgraded without any need of removing the device. Protected Enclosure: Both controller amp; power supply unit are protected with suitable housing so that electronic circuit boards are not exposed to cause any accidental damage. Anti Pass Back: Door wise antipassback. Entry to the particular door is allowed only when the employee has exited through the same door. Door Interlocking: Facility of door interlocking is available. The system allows creating a group of doors such that access to a door within the group is allowed only when all the other doors are in closed condition

od220757/2024_2025 : Supply, Installation, Testing and Commissioning of Push Button switch with accessories

od220758/2024_2025 : Supply, Installation, Testing and Commissioning of Electromagnetic Lock with required mounting brackets etc. complete for single door/double door

od220759/2024_2025 : Supply, Installation, Testing and Commissioning of surface / flush mounted (as required at site) Magnetic Contact (Door position sensor) for access controlled doors.

od220760/2024_2025 : Supply and laying of 4 core 0.75 Sq. mm Un Armored FRLS, Multi stranded Copper Conductor, PVC sheathed Cable for connecting controller to Lock amp; door position sensors, Buzzer, BGU, Push button etc. complete

od220761/2024_2025 : Supply and laying of 8 core 0.75 Sq. mm Un Armored FRLS, Multi stranded Copper Conductor, PVC sheathed Cable for connecting controller to Lock amp; door position sensors, Buzzer, BGU, Push button etc. complete

od220762/2024_2025 : Supply installation, testing, commissioning of EDR (EMERGENCY BREAK GLASS )

od220763/2024_2025 : SITC of nurse call system including the software, nurse station display unit,Bedside call/reset unit,toilet pull cord, door indication lamp etc for and as required to make the system complete and operational in all respectsGround Floor -Triage(6 bed), Treatment (8beb), Iso(2 Rm)

od220764/2024_2025 : SITC of nurse call system including the software, nurse station display unit,Bedside call/reset unit,toilet pull cord, door indication lamp etc for and as required to make the system complete and operational in all respectsGround Floor -Dialysis Unit (6bed)

od220765/2024_2025 : SITC of nurse call system including the software, nurse station display unit,Bedside call/reset unit,toilet pull cord, door indication lamp etc for and as required to make the system complete and operational in all respectsFirst Floor -Post Operative(10 bed), Post Natal(10 bed)

od220766/2024_2025 : SITC of nurse call system including the software, nurse station display unit,Bedside call/reset unit,toilet pull cord, door indication lamp etc for and as required to make the system complete and operational in all respectsFirst Floor -SICU(8 bed)

od220767/2024_2025 : SITC of nurse call system including the software, nurse station display unit,Bedside call/reset unit,toilet pull cord, door indication lamp etc for and as required to make the system complete and operational in all respectsFirst Floor -MICU(8 bed)

od220768/2024_2025 : SITC of nurse call system including the software, nurse station display unit,Bedside call/reset unit,toilet pull cord, door indication lamp etc for and as required to make the system complete and operational in all respectsFirst Floor -Indepentant Rooms (4)

od220769/2024_2025 : SITC of nurse call system including the software, nurse station display unit,Bedside call/reset unit,toilet pull cord, door indication lamp etc for and as required to make the system complete and operational in all respectsSecond Floor -Post operative(7 bed)

od220770/2024_2025 : SITC of nurse call system including the software, nurse station display unit,Bedside call/reset unit,toilet pull cord, door indication lamp etc for and as required to make the system complete and operational in all respectsSecond Floor -Pre operative(7 bed)

od220771/2024_2025 : SITC of nurse call system including the software, nurse station display unit,Bedside call/reset unit,toilet pull cord, door indication lamp etc for and as required to make the system complete and operational in all respectsThird Floor -Pay Wards (11)

SOLAR

od182851/2024_2025 : Supply Installation Testing and Commissioning of following type solar PV systems having all protective devices, AC DC distribution board with MCBs and surge protective devices, AC distribution panel having 1 no 125A isolator 2/3 nos 63A MCBs, 3 Phase 4 wire -/5A,Cl 0.2s energy meter including CTs ,Supply and fixing HT CT net meter necessary cabling including DC cable for panel to inverter / DC DB and AC cabling from inverter to AC DB , AC panel and Main panel ,all civil and mechanical works for supporting, earthing using proper cable /strip, earth electrode and lightning protection system as directed by electrical inspectorate, preparation of design and getting approval from Electrical inspectorate /KSEBL and getting energization sanction, all the works shall comply the MNRE standards.Wardtower- 50 kWp monocrystalline solar PV panels,50kW grid connected string inverter having all protective devices

od182852/2024_2025 : Providing and fixing steel structure for supporting solar PV panel up to a height of 3 meter from floor level including fixing of tubular poles ,purling ,anchor faster for complete installation

MANIFOLD AND PLANT ROOM - OXYGEN SYSTEM

od151937/2024_2025 : Supply, installation testing and commissioning of Automatic Oxygen Control Panel with minimum flow rate of 2000 LPM with liquid oxygen connectivity, suitable for 2x16 manifold system Fully complying with ISO 10524-2, ISO 7396-1:2007/HTM02-01 as per technical specifications. The cylinders shall not be included in the quoted price.

od151938/2024_2025 : Supply,testing and commissioning of Oxygen Manifold - 2 banks x16 cylinders, as per technical specifications. The cylinders shall not be included in the quoted price.

od151939/2024_2025 : Supply,testing and commissioning of Cylinder Emergency Oxygen Manifold with high flow regulator- 1 Bank X5 Cylinders

NITROUS OXIDE SYSTEM

od151950/2024_2025 : NITROUS OXIDE SYSTEM: Supply,testing and commissioning of automatic N2O control panel complete set with inlet and outlet connectors suitable for 2x3 manifold system with minimum flow rate of 600 LPM, fully automatic control panel for both sides with brass hosing and suitable connectors.BSP (M) thread.

od151951/2024_2025 : Supply,testing and commissioning of Cylinder Manifold Nitrous oxide - 2 bank x 3cylinders as per technical specifications.

od151952/2024_2025 : Supply,testing and commissioning of Nitrous Oxide Emergency Manifold - 1 banks x 2 cylinders with hogh flow Regulator.as per technical specifications. The cylinders shall not be included in the quoted price.

CARBON DIOXIDE SYSTEM od152009/2024_2025 : Supply,testing and commissioning of Cylinder Emergency CO2 Manifold - 2 bank x 1 cylinder with a high flow regulator with gauges and safety valves complete with all accessories etc. as required complete as per specification

od152010/2024_2025 : CARBON DIOXIDE SYSTEM: Supply,testing and commissioning of semi automatic CO2 control panel complete set with inlet and outlet connectors for automatic for both sides with brass housing and suitable connectors. BSP (M) thread.

MEDICAL AIR SYSTEM od152032/2024_2025 : MEDICAL AIR SYSTEM: Supply,testing and commissioning of Compressed air plant complete with - 2 compressors, each compressor should have minimum free air delivery of 2500 LPM @10bars, 1 air receiver tank of minimum 2000 ltr capacity, filtration and dryer system to ensure medical air quality as per HTM standards (each compressor module should include an inline filter with particle retention of 10 microns), NRV, pressure reducing station,automatic drain valves,pressure guages,ball valves, electrical control panel including circuit breakers, starters, pressure switches, timers, as per technical specifications

VACCUM PLANT od152183/2024_2025 : Medical Vacuum Plant Package Duplex 3000 LPM with control panel.: Supply, Installation, testing and commissioning of reciprocating type Oil-lubricated Duplex Medical Vacuum Plant (Package Unit) having a capacity of 3000 LPM as per HTM 02-01/NFPA 99C standards and tender technical specification (PUMP,RESERVOIR,BACTERIAL FILTER)

MOTOR CONTROL od152182/2024_2025 : Supply, Installation , testing and commissioning of motor control center consisting of 125 Amp 4P isolator incomer, phase indicators ,outgoing of 5nos 63 TP D curve MCB ,starters, push button, motor protection devices, instrumentation, control cabling for Air compressor amp; vaccum Pump system etc as per technical specification

PIPE LINE SYSTEM

od152192/2024_2025 : Supply,installation testing and commissioning of Copper pipe: as per stanard BS:EN13348:2008 /astm B819 standards,solid drawn,seamless,deoxidized,non-arsenical,half hard tempered and degreased copper pipe conforming to the standardwith all fiiings supporting materials bracing, pressure testing etc as per standards.All copper pipes should be degreased and delivered at both ends of required sizes and as per technical specifications.12mm x 1 mm thick Copper pipe

od152193/2024_2025 : Supply, installation testing and commissioning of Copper pipe: as per standard BS:EN13348:2008 /astm B819 standards, solid drawn, seamless, deoxidized, non-arsenical, half hard tempered and degreased copper pipe conforming to the standardwith all fiiings supporting materials bracing, pressure testing etc as per standards .All copper pipes should be degreased and delivered at both ends of required sizes and as per technical specification -15mm x 0.9mm thick copper pipe

od152194/2024_2025 : Supply, installation testing and commissioning of Copper pipe: as per standard BS:EN13348:2008 /astm B819 standards, solid drawn, seamless, deoxidized, non-arsenical, half hard tempered and degreased copper pipe conforming to the standardwith all fiiings supporting materials bracing, pressure testing etc as per standards. All copper pipes should be degreased and delivered at both ends of required sizes and as per technical specifications.22 mm x0.9 mm thick Copper pipe

od152195/2024_2025 : Supply, installation testing and commissioning of Copper pipe: as per standard BS:EN13348:2008 /astm B819 standards, solid drawn, seamless, deoxidized, non-arsenical, half hard tempered and degreased copper pipe conforming to the standardwith all fiiings supporting materials bracing, pressure testing etc as per standards. All copper pipes should be degreased and delivered at both ends of required sizes and as per technical specifications.28 mm x 0.9 mm thick Copper pipe

od152196/2024_2025 : Supply,installation testing and commissioning of Copper pipe: as per stanard BS:EN13348:2008 /astm B819 standards,solid drawn,seamless,deoxidized,non-arsenical,half hard tempered and degreased copper pipe conforming to the standardwith all fiiings supporting materials bracing, pressure testing etc as per standards.All copper pipes should be degreased and delivered at both ends of recquired sizes and as per technical specifications. 35mm x 1.2 mm thick Copper pipe

od152197/2024_2025 : Supply of Copper pipe: as per stanard BS:EN13348:2008 /astm B819 standards,solid drawn,seamless,deoxidized,non-arsenical,half hard tempered and degreased copper pipe conforming to the standardwith all fiiings supporting materials bracing, pressure testing etc as per standards. All copper pipes should be degreased and delivered at both ends of recquired sizes and as per technical specification 42 mm x 1.2 mm thick copper pipe

od152198/2024_2025 : Supply of Copper pipe: as per stanard BS:EN13348:2008 /astm B819 standards,solid drawn,seamless,deoxidized,non-arsenical,half hard tempered and degreased copper pipe conforming to the standardwith all fiiings supporting materials bracing, pressure testing etc as per standards. All copper pipes should be degreased and delivered at both ends of recquired sizes and as per technical specification 54 mm x 1.2 mm thick copper pipe

od152199/2024_2025 : Supply of Copper pipe: as per stanard BS:EN13348:2008 /astm B819 standards,solid drawn,seamless,deoxidized,non-arsenical,half hard tempered and degreased copper pipe conforming to the standardwith all fiiings supporting materials bracing, pressure testing etc as per standards. All copper pipes should be degreased and delivered at both ends of recquired sizes and as per technical specification 72mm x 1.2 mm thick copper pipe

GAS OUTLETS

od152299/2024_2025 : Supply,Installation , testing and commissioning of Gas Outlets meeting requirements of EN ISO 9170-1/ HTM 02-01/DIN as per technical specifications. Venturi type AGSS outlets conforming to EN ISO 9170-2

od152300/2024_2025 : Supply,Installation , testing and commissioning of Gas Outlets meeting requirements of EN ISO 9170-1/ HTM 02-01/DIN as per technical specifications. O2 Outlets with Probes

od152301/2024_2025 : Supply,Installation , testing and commissioning of Gas Outlets meeting requirements of EN ISO 9170-1/ HTM 02-01/DIN as per technical specifications. Vac Outlets with Probes

od152302/2024_2025 : Supply,Installation , testing and commissioning of Gas Outlets meeting requirements of EN ISO 9170-1/ HTM 02-01/DIN as per technical specifications. Air (7 bar) Outlets with Probes

od152303/2024_2025 : Supply,Installation , testing and commissioning of Gas Outlets meeting requirements of EN ISO 9170-1/ HTM 02-01/DIN as per technical specifications-Air (4 bar) Outlets with Probes

od152304/2024_2025 : Supply, Installation , testing and commissioning of Gas Outlets meeting requirements of EN ISO 9170-1/ HTM 02-01/DIN as per technical specifications. N2O Outlets with Probes

od152305/2024_2025 : Supply,Installation , testing and commissioning of Gas Outlets meeting requirements of EN ISO 9170-1/ HTM 02-01/DIN as per technical specifications.CO2 Outlets with Probes

MASTER ALARM PANEL od152323/2024_2025 : Supply,testing and commissioning of Master Plant Alarm Panel ,Complies with HTM 02-01/ISO 7396-1 Standards. Each Master Alarm should be modular in design and be fitted with required number of master alarm modules. The master alarms should be capable to monitor minimum 25 point. Each point represents an alarm condition that the source equipment might have. When an alarm condition exists, a red-light flashes and the audible alarm sounds. If several alarm conditions occur simultaneously, the most recent alarm light should flash, while the other alarm lights should remain lit. When an alarm condition is created, an audible alarm should be actuated. A dry contact module should be available to interface with a building management system. The box material should be of gauge steel of requisite thickness and equipped with mounting brackets. The emissions from alarms should conform with EMC standards. Master alarm management system should be designed to display alarm conditions from the source supply units indicating the broad status of the source equipment and manifolds as well as the master distribution status from the source supplies. Depending on the alarm priority, a visual and audible alarm should be initiated to indicate an alarm condition. Each panel shall display and/or input of multi point alarms,including all necessary cabling between mater alarm and floor panels. The master alarm must be able to monitor the following source alarm conditions. as per technical specifications.Master Plant Alarm Panel ,Complies with HTM 02-01/ISO

AREA VALVE AND ALARM UNIT

od152412/2024_2025 : Supply,Installation,testing and commissioning of Area Valve Service + Alarm Units, fully complying, by means of pressure sensors which detect deviations from the normal operating limits of either pressure or medical vacuum. The area alarm should have a digital/analogue display of pressures. The medical gas area alarm should fully satisfy the NFPA 99/HTM 02-01/ISO 7396-1 requirements and should be European CE Certified or UL listed. An audible warning should sound simultaneously with any failure indication and a mute facility should be provided as per technical Specifications. 6gas

od152413/2024_2025 : Supply,Installation,testing and commissioning of Area Valve Service + Alarm Units, fully complying, by means of pressure sensors which detect deviations from the normal operating limits of either pressure or medical vacuum. The area alarm should have a digital/analogue display of pressures. The medical gas area alarm should fully satisfy the NFPA 99/HTM 02-01/ISO 7396-1 requirements and should be European CE Certified or UL listed. An audible warning should sound simultaneously with any failure indication and a mute facility should be provided as per technical Specifications. 5gas-

od152414/2024_2025 : Supply,Installation,testing and commissioning of Area Valve Service + Alarm Units, fully complying, by means of pressure sensors which detect deviations from the normal operating limits of either pressure or medical vacuum. The area alarm should have a digital/analogue display of pressures. The medical gas area alarm should fully satisfy the NFPA 99/HTM 02-01/ISO 7396-1 requirements and should be European CE Certified or UL listed. An audible warning should sound simultaneously with any failure indication and a mute facility should be provided as per technical Specifications. 4gas -

od152415/2024_2025 : Supply,Installation,testing and commissioning of Area Valve Service + Alarm Units, fully complying, by means of pressure sensors which detect deviations from the normal operating limits of either pressure or medical vacuum. The area alarm should have a digital/analogue display of pressures. The medical gas area alarm should fully satisfy the NFPA 99/HTM 02-01/ISO 7396-1 requirements and should be European CE Certified or UL listed. An audible warning should sound simultaneously with any failure indication and a mute facility should be provided as per technical Specifications. 3 gas -

od152416/2024_2025 : Supply,Installation,testing and commissioning of Area Valve Service + Alarm Units, fully complying, by means of pressure sensors which detect deviations from the normal operating limits of either pressure or medical vacuum. The area alarm should have a digital/analogue display of pressures. The medical gas area alarm should fully satisfy the NFPA 99/HTM 02-01/ISO 7396-1 requirements and should be European CE Certified or UL listed. An audible warning should sound simultaneously with any failure indication and a mute facility should be provided as per technical Specifications. 2 gas -

BALL VALVES

od153228/2024_2025 : Supply,installation, testing and commissioning of Ball Valves, complying with HTM 02-01/DIN, as per technical Specifications-54mm

od153229/2024_2025 : Supply,installation, testing and commissioning of Ball Valves, complying with HTM 02-01/DIN, as per technical Specifications-42mm

od153230/2024_2025 : Supply,installation, testing and commissioning of Ball Valves, complying with HTM 02-01/DIN, as per technical Specifications-35mm

od153231/2024_2025 : Supply,installation, testing and commissioning of Ball Valves, complying with HTM 02-01/DIN, as per technical Specifications28mm

od153232/2024_2025 : Supply,installation, testing and commissioning of Ball Valves, complying with HTM 02-01/DIN, as per technical Specifications-22mm

od153308/2024_2025 : Supply,installation, testing and commissioning of Ball Valves, complying with HTM 02-01/DIN, as per technical Specifications-15 mm

OXYGEN GAS CYLINDER

od153217/2024_2025 : Supply,testing and commissioning of D type CO2 Gas filled Cylinder having as per technical specification.D type CO2 Gas filled Cylinder

od153218/2024_2025 : Supply,testing and commissioning of D type Nitrous Oxide Gas filled Cylinder as per technical specification.D type Nitrous Oxide Gas filled Cylinder

od153219/2024_2025 : Supply, testing and commissioning of class D type Oxygen Gas filled Cylinder etc in complete as per technical specification.

BED HEAD PANELS

od153258/2024_2025 : Supply and installation of Bed Head 5ft(Horizontal) unit made out of High sbength extruded Aluminum Panel of minimum 2.5 mm thickness with powder coated to make it aesthetically appealing and long lasting, the panel should be divided into different sections to segregate power, data and medical gas chamber suitable for accommodating following utilities - Oxygen, Vacuum, Medical Air, Nurse call switch 1, spare probe, 2 no 5 /15A combined socket with switch outlet mdash; 2 set, provision RJ-45 socket/ Ethernet, shall have monitor holder and equipped with two side rail system to hold different associated accessories like vaccine basket, Holder for vacuum collection jar, examination lamp, IV pole, etc. and all necessary mechanical supports for complete installation as instructed and directed by engineer in- charge. Bed head panel as above with 2 Gas outlet

od153259/2024_2025 : Supply and installation of Bed Head 5ft (Horizontal) unit made out of High sbength extruded Aluminum Panel of minimum 2.5 mm thickness with powder coated to make it aesthetically appealing and long lasting, the panel should be divided into different sections to segregate power, data and medical gas chamber suitable for accommodating following utilities - Oxygen, Vacuum, Medical Air, Nurse call switch ; 1, spare probe, 2 no 5 /15A combined socket with switch outlet mdash; 2 set, provision RJ-45 socket/ Ethernet, shall have monitor holder and equipped with two side rail system to hold different associated accessories like vaccine basket, Holder for vacuum collection jar, examination lamp, IV pole, etc. and all necessary mechanical supports for complete installation as instructed and directed by engineer in- charge. Bed head panel as above with 5 Gas outlet

od153262/2024_2025 : Supply, Installation, testing and commissioning of High Pressure Antistatic Hose with color coded.

od153263/2024_2025 : Supply Installation of Theatre Vacuum unit with trolly and 2000 ml collection jar as per technical.

od153264/2024_2025 : Supply Installation of Ward vacuum unit with 600 ml collection jar asper technical specification.

od153265/2024_2025 : Supply Installation of BPC Oxygen Flow meter as per technical specification.

JAMPANA CONSTRUCTION PRIVATE LIMITED (BID ID -2147010)

Bidder Name

R K INFRA (INDIA) PVT LTD

JAMPANA CONSTRUCTION PRIVATE LIMITED