REPAIR AND REPLACEMENT OF INTERNAL WIRING AND CONNECTED WORKS AT 9IRSD OLD MO BVY NAUSHAKTI VIHAR VISWAKARMA UNDER AGE EM OF GE ND VISAKHAPATNAM

Amount

The rates quoted by the tenderer shall deemed to be inclusive for the following provisions in addition to the other conditions specified in the tender documents. No claim whatsoever shall be entertained at a later date on this account:- [i] The repairs shall be done by skilled workmen in the relevant field to the entire satisfaction of Engineer-in-Charge. The contractor shall engage sufficient manpower for the entire period so that progress of work shall not be hampered due to non availability of labour at any time. [ii] The contractor on getting information through Site order / Works diary regarding the nature of repair to be carried out, he shall immediately respond to the same and make all out efforts to carry out the same on priority within 48 hours. In case of any delay in responding / attending the repairs within 48 hours, the GE may at his absolute discretion impose penalty on the contractor at Rs. 100/- per day per each work ordered upto 05(Five) days and Rs. 200/- per day thereafter till completion of the work in case of delay without valid reasons as decided by GE. [iii] Further, the above penalty is applicable even for the multiple locations of work at the same period. It is the responsibility of contractor to make suitable arrangements for attending the repairs simultaneously at all the places. [iv] The decision of the GE as to whether a particular repair has been attended or not on a particular day will be final and binding. The above penalty shall be in addition to the provisions made in clause 50 of IAFW-2249 i.e (Compensation for delay in completion of work). NOTE:- Tenderers/bidders are advised to vist the site and quote their rate accordingly and no claim whatsoever in this regard shall be admissible at any later stage.

Material and labour for point wiring with 1.5 Sqmm PVC insulated and unsheathed copper cable 1100V, FRLS grade multistranded drawn in and including 20mm PVC conduit totally concealed/surface conduit in walls/ceiling with tee, bend, elbows,junction box etc. with provision of PVC insulated 1.5 sqmm copper conductor cable as earth continuity including 2.0mm thick prefabricated concealed galvanised boxes with white modular cover plate & frame of suitable size for fixing modular switches, sockets regulator and connected the earth wire to common earth dolly for One light/fan point/bell point/5 Amp independent Socket point controlled by one switch including Taking down carefully copper / aluminium point wiring complete along with fittings such as switches ,Sockets, ceiling rose , lamp holder etc. [Note: Quoted rate is deemed to be inclusive for necessary cutting chases in walls / floors / ceiling of any description, pinning in making good to disturbed surfaces where required and pointing in cement mortar 1:3 and finished to match with existing finishes complete]

All as per item No. 2 here in before but for 05/06 Amp switch socket out let,on same board complete all as specified and directed.

All as per item No 2 here in before but one light point controlled two way switches complete all as specified and directed.

All as per item No. 2 above but for 15/16Amp switch socket out let, independent with 4.0sqmm copper cable of PVC insulated, unsheathed, multi stranded and 4.0 Sqmm for earth continuity conductor, complete all as specified and directed.

M&L for point wiring with 1.5sqmm PVC insulated unsheathed multistranded 1100V grade copper FRLS cable with one run of 1.5sqmm PVC insulated copper cable as earth continuity drawn in existing Concealed/ surface PVC conduit for one light point/ fan point/bell point 5 Amp independent socket point controlled by one switch including 2.0mm thick prefabricated concealed galvanised boxes with hylem cover plate of suitable size for fixing switches, sockets regulator and connected the earth wire to common earth dolly , including Taking down carefully copper / aluminium point wiring complete along with fittings such as switches ,Sockets, ceiling rose , lamp holder etc. [Note: Quoted rate is deemed to be inclusive for necessary cutting chases in walls / floors / ceiling of any description, pinning in making good to disturbed surfaces where required and pointing in cement mortar 1:3 and finished to match with existing finishes complete]

All as per item No 6 here-in-before but in same board complete all as specified and directed.

All as per item No 6 here in before but one light point controlled two switches complete all as specified and directed.

All same as per item No 06 here-in- before but with 4 sqmm PVC insulated unsheathed multistranded copper FRLS grade cable with one run of 4 sqmm PVC insulated copper cable as earth continuity for power socket on independent board complete all as specified and directed.

Material and labour for point wiring with 1.5 Sqmm PVC insulated and unsheathed copper cable 1100V, FRLS grade multistranded drawn in and including 20mm PVC existing concealed/surface conduit in walls/ceiling with tee, bend, elbows,junction box etc. with provision of PVC insulated 1.5 sqmm copper conductor cable as earth continuity including 2.0mm thick prefabricated concealed galvanised boxes with white modular cover plate & frame of suitable size for fixing modular switches, sockets regulator and connected the earth wire to common earth dolly for One light/fan point/bell point/5 Amp independent Socket point controlled by one switch including Taking down carefully copper / aluminium point wiring complete along with fittings such as switches ,Sockets, ceiling rose , lamp holder etc. [Note: Quoted rate is deemed to be inclusive for necessary cutting chases in walls / floors / ceiling of any description, pinning in making good to disturbed surfaces where required and pointing in cement mortar 1:3 and finished to match with existing finishes complete]

All as per item No 10 here-in-before but in same board complete all as specified and directed.

All as per item No 10 here in before but one light point controlled by two switches complete all as specified and directed.

All as per item No 10 here in before but with 4 sqmm PVC insulated unsheathed multistranded copper FRLS grade cable with one run of 4 sqmm PVC insulated copper cable as earth continuity for power socket on independent board complete all as specified and directed.

Material and labour for point wiring with 1.5 Sqmm PVC insulated and unsheathed copper cable 1100V, FRLS grade multistranded drawn in and including 25mm surface stove enamel steel conduit in walls/ceiling with tee, bend, elbows,junction box etc. with provision of PVC insulated 1.5 sqmm copper conductor cable as earth continuity suitable for flame proof switches, sockets regulator and connected the earth wire to common earth dolly for One light point/fan point controlled by one switch complete all as specified and as directed.

Description all as per item No.14 above but for 15/16Amp flame proof switch socket out let, independent with 4.0sqmm copper cable of PVC insulated, unsheathed, multi stranded and 4.0 Sqmm for earth continuity conductor, complete all as specified

All as per item No 14 here in before but one light point controlled two switches.

Supply and fixing Modular switch 1 way 6A, 1 module single pole complete all as specified and directed

Supply and fixing Modular switch 1 way 16A, 1 module single pole complete all as specified and directed

S & F modular switch 2 way 1 module single pole complete all as specified and directed

Supply and fixing of modular Socket, 6A - 2/3 pin combined 2 module, 230 volt, multipurpose, complete all as specified and directed

Supply and fixing of modular Socket 6A/16A - 2/3 pin combined 2 module, 230 volt,multipurpose, complete all as specified and directed

Supply and fixing of modular Fan step regulator, 120W - 2 module complete all as specified and directed.

S & F modular Bell push 1 module single pole complete all as specified and directed

S & F in repairs switch piano flush button, single pole one way 5 Amps, 230V AC supply complete all as specified and directed

S & F in repairs Two way switch piano flush button 6 A complete all as specified and directed

S & F in repairs switch Socket combination 3 pin 5 Amps flush type, 230V AC supply , complete all as specified and directed

S & F in repairs switch socket combination 2 in 1, 5 pin, 5/15 Amps, 230V AC supply , complete all as specified and directed

S & F in repairs switch piano flush button, single pole one way 15 Amps, 230V AC , complete all as specified and directed by the Engineer-in-Charge.

S & F in repairs bell push piano flush button 6A 230V complete all as specified and directed

S&F in repairs electronic fan regulator , socket type upto 300 Watt, 230V AC supply complete all as specified and directed

S & F in repairs Calling bell ding dong 230 v AC supply complete all as specified and directed

Supply and fixing in repairs ceiling rose surface bakelite 65 x 30 mm with 3 terminals complete all as specified and directed.

S & F LED tube light fittings, retro bar professional WH 5700K to 6200K and minimum 1800/2000 lumens of warm/cool white comprising of batten with all accessories internally prewired and connecting up with twin core twisted copper conductor cable of suitable size including taking down old fittings complete all as specified and as directed.

S & F LED light fittings, 2 feet long of minimum 900 lumens of warm/ cool white wall mounted batten with all accessories internally prewired and connecting up with twin core twisted copper conductor cable of suitable size including taking down old fittings complete all as specified and as directed .

S & F wall mounted bulk head LED light of minimum 1500 Lumens warm/cool day light with all accessories internally prewired and including connecting up with twin core twisted copper conductor cable of suitable size including taking down old fittings complete all as specified and as directed.

S & F Square recessed/surface mounted LED light (1'x1') of minimum 2200 to 2400 Lumens warm/cool day light with all accessories internally prewired and including connecting up with twin core twisted copper conductor cable of suitable size including taking down old fittings complete all as specified and as directed by the Engineer-in-Charge.

S & F Square recessed/surface mounted LED light of minimum (1/2'x1/2') 1500 Lumens warm/cool day light with all accessories internally prewired and including connecting up with twin core twisted copper conductor cable of suitable size including taking down old fittings complete all as specified and as directed .

S & F Square recessed/surface mounted LED light (2'x2') of minimum 3200 to 3600 Lumens warm/cool day light with all accessories internally prewired and including connecting up with twin core twisted copper conductor cable of suitable size including taking down old fittings complete all as specified and as directed

S & F circular surface/recessed mounted LED light of round type minimum 1800 to 2000 Lumens with all accessories internally prewired and including connecting up with twin core twisted copper conductor cable of suitable size including taking down old fittings complete all as specified and as directed

S & F Highbay light 12000 Lumens (min) new generation LED with high luminous efficacy, IP65 protected, front toughened glass, energy saving with all accessories internally prewired and including connecting up with twin core twisted copper conductor cable of suitable size complete all as specified and as directed

S & F flood light 9000 to10000 Lumens (min) new generation LED with high luminous efficacy, IP66 protected, front toughened glass, energy saving with all accessories internally prewired and including connecting up with twin core twisted copper conductor cable of suitable size including taking down old fittings complete all as specified and as directed .

S&F CMRI certified flame proof LED bulkhead fittingsof not less than 6000 lm output 5700K,PF>0.95 with pressure die cast aluminium housing IP-65 protection heat resistance toughen glass cover, electronic driver all accessories internally prewired connecting with flexible copper conductor of size 1.5sqmm including taking down existing light fittings of any description complete all as specified and directed.

S & F in repair decorative wall mounted LED mirror light of minimum 900 to 1000 Lumens with all accessories internally prewired and including connecting up with twin core twisted copper conductor cable of suitable size complete all as specified and as directed

S & F Building Security light LED type of minimum 4000 to 4500 Lumens Pressure die cast aluminium housing IP 66 protection with all accessories internally prewired and including connecting up with twin core twisted copper conductor cable of suitable size including bracket made of 40mm dia GI light grade pipe of 1.2m long bent to shape fixed with suitable MS clamps, bolts, nuts and washers duly painted including taking down old fittings complete all as specified and as directed

S & F in repairs bulb holder (pin pype/thread type) including 7 watts LED bulb pin type / thread type complete all as specified and as directed

Supply and fixing in repairs Post top lantern for 360 degree indirect light with IP- 65 protection 40W AC Supply single phase energy saving, environmental friendly, long life aesthetically designed with resistant to impact and corrosion, Glare free and better uniformity and symetrical light distruction spun aluminium landscape luminaire with high power LEDs as light source complete all as specified and directed.

Taking down ceiling fan from its position and doing complete overhauling of fan including replacement of fan clamp and split pin, rubber bush, 02 no canopy fan capacitor of 2.5mfd and other spares ,painting with synthetic enamel paint over a paint of primer refixing the same after repairs complete all as directed .

Taking down & Rewinding of ceiling fan motor of type 1200 mm sweep & any make, with super enameled copper wire of appropriate gauge including replacement of insulating materials such as laminated lethroid paper, sleeves, necessary varnishing with golden colour varnish, replacing the bearings of suitable, spray painting etc complete all as specified and directed

Taking down Exhaust fan of any size from its position and doing complete overhauling of fan including replacement of fan clamp and split pin, rubber bush, fan capacitor of 4.0mfd and other spare parts painting with synthetic enamel paint over a coat of primer refixing the same after repairs complete all as directed by Engr-in-Charge.

Taking down & Rewinding of Exhaust fan motor of sweep upto 380mm & any make (including flamepfoof/normal type), with super enameled copper wire of appropriate gauge including replacement of insulating materials such as laminated lethroid paper, sleeves, necessary varnishing with golden colour varnish, replacing the bearings of suitable size,painting etc. complete all as specified and directed

Taking down existing Air circulator / Pedestal fan of any type and sweep from any position and refixing the same in new / old position after necessary over hauling / servicing and cleaning for dust, grease and applying one coat of synthetic enamel paint (spray painting) including filling the cavities with filler complete all as specified and directed .

Rewinding of pedestal/Air circulator fan motor of sweep upto 600mm of any make, with super enameled copper wire of appropriate gauge including replacement of insulating materials such as laminated lethroid paper, sleeves, necessary varnishing with golden colour varnish, replacing the bearings, capacitor of suitable capacity, painting etc complete all as specified and directed

S & F in repairs MCCB 3 Pole, 32/40/63 Amps, 50 Hz, 16KA, 415 Volts with all necessary aluminium lugs and glands, etc complete all as specified and directed

S & F in repairs MCCB 3 Pole, 100 Amps, 50 Hz, 25KA, 415 Volts, with all necessary aluminium lugs and glands, etc complete all as specified and directed

S & F in repairs MCCB 4 Pole, 125 Amps, 50 Hz, 16KA, 415 Volts,adjustable thermal and fixed magnetic type with all necessary aluminium lugs and glands, etc complete all as specified and directed

S & F in repairs MCCB 4 Pole, 160 Amps, 50 Hz, 36KA, 415 Volts,adjustable thermal and fixed magnetic type with all necessary aluminium lugs and glands, etccomplete all as specified and directed

S & F in repairs MCCB 4 Pole, 250 Amps, 50 Hz, 36KA, 415 Volts, adjustable thermal and fixed magnetic typewith all necessary aluminium lugs and glands, etc complete all as specified and directed

Supply and fixing in replacement of Factory made sheet metal enclosure for VTPN DBs double door (Fixed flush to the wall), MCCB as incoming & outgoing as TPN 415 volt, 8 Way, IP-43 protection with 200 Amp rated bus bar and 4.0Sq. mm copper PVC sheathed cable for earth continuity and suitable for having MCB’s, including taking out old DBs any type & size and making good the disturbed surfaces by using plaster/ PCC/ cement work & match with existing surface etc , complete all as specified and directed

Supply and fixing in replacement of Factory made sheet metal enclosure for TPN MCCB DBs double door (Fixed flush to the wall), MCCB as incoming & outgoing as TPN 415 volt, 6 Way, IP-43 protection with 200 Amp rated bus bar and 4.0Sq. mm copper PVC sheathed cable for earth continuity and suitable for having MCB’s,including taking out old DBs any type & size and making good the disturbed surfaces by using plaster/ PCC/ cement work & match with existing surface etc , complete all as specified and directed

Supply and fixing in replacement of Factory made sheet metal enclosure for TPN MCB DBs double door (Fixed flush to the wall), TPN, 415 volt, 4 Way, IP-42 protection with 200 Amp rated bus bar and 1.5 Sq. mm copper PVC sheathed cable for earth continuity and suitable for having MCB’s , including taking out old DBs any type & size and making good the disturbed surfaces by using plaster/ PCC/ cement work & match with existing surface etc complete all as specified and directed

Supply and fixing in replacement of Factory made sheet metal enclosure for DBs (Fixed flush to the wall), SPN, 240 volt, 8 Way, IP-42 protection with 200 Amp rated bus bar and 1.5 Sq. mm copper PVC sheathed cable for earth continuity and suitable for having MCB’s , including taking out old DBs any type & size and making good the disturbed surfaces by using plaster/ PCC/ cement work & match with existing surface etc complete all as specified and directed

Supply and fixing in replacement of Factory made sheet metal enclosure for DBs (Fixed flush to the wall), SPN, 240 volt, 12 Way, IP-42 protection with 200 Amp rated bus bar and 1.5 Sq. mm copper PVC sheathed cable for earth continuity and suitable for having MCB’s , including taking out old DBs any type & size and making good the disturbed surfaces by using plaster/ PCC/ cement work & match with existing surface etc , complete all as specified and directed .

Supply and fixing in replacement of Factory made sheet metal enclosure for DBs (Fixed flush to the wall), SPN, 240 volt, 4 Way, IP-42 protection with 200 Amp rated bus bar and 1.5 Sq. mm copper PVC sheathed cable for earth continuity and suitable for having MCB’s , including taking out old DBs any type & size and making good the disturbed surfaces by using plaster/ PCC/ cement work & match with exiting surface etc , complete all as specified and directed .

Supply and fixing in repairs MCB 6 to 32 Amp, 240 Volt, SP, breaking capacity 10 KA 'C' series, complete all as specified and directed

Supply and fixing in repairs MCB 40-63 Amp, 415 Volt, TPN, breaking capacity 10 KA 'C' series, , complete all as specified and directed

Supply and fixing in repairs MCB 6 to 32 Amp, 240 Volt, SPN, breaking capacity 10 KA 'C' series,complete all as specified and directed

Supply and fixing in repairs MCB 25 to 63 Amp, 415 Volt, TP, breaking capacity 10 KA 'C' series, complete all as specified and directed

Supply and fixing in repairs RCBO 40 A,Double pole 30mA -100mA, complete all as specified and directed

S & F in repairs KWH meter box of size 250x250x155mm shock proof, rust proof, with provision for cable entry at bottom and/or sides, weather proof suitable for LT single Phase KWH meter including taking down and refixing KWH meter in old / new location with all connections and testing of meter complete all as specified and directed

M&L for sub main wiring with four runs of 10.0 Sqmm FRLS PVC un-sheathed, copper conductor cable, 1100 Volt, and one run of copper earth wire 10.0 Sqmm as earth wire drawn through and including PVC concealed/surface conduit of 40 mm dia, including taking down unsv sub main wiring of any type, complete all as specified. Note: Copper conductor 10 Sqmm 05 runs along with PVC concealed conduit shall be measured as one length and Cutting of chases in walls and making good the disturbed surface as per existing shall be deemed to be included in the quoted rate.

M&L for sub main wiring with two runs of 6.0 Sqmm FRLS PVC un-sheathed, copper conductor cable, 1100 Volt, and one run of FRLS copper conductor earth wire 6.0 Sq mm drawn through and including PVC concealed/surface conduit of 25 mm dia, including taking down unsv sub main wiring of any type, complete all as specified and directed. Note: Copper conductor 03 runs along with PVC concealed conduit shall be measured as one length and Cutting of chases in walls and making good the disturbed surface as per existing shall be deemed to be included in the quoted rate.

M&L for sub main wiring with two runs of 4.0 Sqmm FRLS PVC un-sheathed, copper conductor cable, 1100 Volt, and one run of FRLS copper conductor earth wire 4.0 Sq mm drawn through and including PVC concealed/surface conduit of 25 mm dia, including taking down unsv sub main wiring of any type, complete all as specified and directed. Note: Copper conductor 04 sqmm 03 runs along with PVC concealed conduit shall be measured as one length and Cutting of chases in walls and making good the disturbed surface as per existing shall be deemed to be included in the quoted rate.

M&L for sub main wiring with two runs of 2.5 Sqmm FRLS PVC un-sheathed, copper conductor cable, 1100 Volt, and one run of FRLS copper conductor earth wire 2.5 Sq mm drawn through and including PVC concealed/surface conduit of 25 mm dia, including taking down unsv sub main wiring of any type, complete all as specified and directed. Note: Copper conductor 2.5 sqmm 03 runs along with PVC concealed conduit shall be measured as one length and Cutting of chases in walls and making good the disturbed surface as per existing shall be deemed to be included in the quoted rate.

Supply laying and testing in repairs of XLPE insulated armoured electric cable (heavy duty 1100volt )grade with stranded aluminium conductor of size 95sqmm 3.5 core in tenches/walls complete all as specified and directed .

Supply laying and testing in repairs of XLPE insulated armoured electric cable (heavy duty 1100volt )grade with stranded aluminium conductor of size 70 sqmm 3.5 core in tenches/walls complete all as specified and directed .

Supply laying and testing in repairs of XLPE insulated armoured electric cable (heavy duty 1100volt )grade with stranded aluminium conductor of size 50 sqmm 3.5 core in tenches/walls complete all as specified and directed .

Supply laying and testing in repairs of XLPE insulated armoured electric cable (heavy duty 1100volt )grade with stranded aluminium conductor of size 35 sqmm 3.5 core in tenches/walls complete all as specified and directed .

Supply laying and testing in repairs of XLPE insulated armoured electric cable (heavy duty 1100volt )grade with stranded aluminium conductor of size 25 sqmm 4 core in tenches/walls complete all as specified and directed .

Supply laying and testing in repairs of XLPE insulated armoured electric cable (heavy duty 1100volt )grade with stranded aluminium conductor of size 16 sqmm 4 core in tenches/walls complete all as specified and directed .

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth and getting out in hard/dense soil for laying of cables complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed

Removing excavated surplus soils meterial not exc 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

Material and labour for 23 mm thick layer of natural river sand punned down to 18 mm thick as cushioning of cables, including spreading and punning down complete all as specified and directed. Note : punned thickness only shall be measured for payment purpose.

Supply and laying in trenches un- reinforced pre cast concrete cable cover class LV,type I, flat size 250x150x40 mm complete all as specified and directed

S&F in repairs for 50 mm dia steel water tubes 'light grade' galvanised for cable protection including sealing both ends complete all as specified and as directed by Engineer in charge

Material and labour for cutting existing road/PCC/drain for laying of underground cable and including necessary earth work and making good to match with the exisitng surface with PCC 1:3:6 type CI using 20mm graded aggregates complete all as specified and as directed.

Supply & fixing in repairs single pointed air termination Aluminium rod, 12 mm dia, 300 mm long complete all as specified and as directed.

Supply & fixing in repairs aluminium strip 25 mm x 3 mm Complete with saddles and fixing screws for Fitting the strip complete all as specified and as directed.

supply and fixing in repairs test point terminal box of size 200 x 100 x 100 mm made out of 2 mm thick hot dip galvanised sheet drilled and screwed including 6 Nos 15 mm long hexagonal head screws complete with test point terminal block made out of Gun metal or Phosphorus Bronze size 75 x 75 x 25 mm drilled and screwed including 3 Nos 8 mm dia 25 mm long hexagonal head screws, etc complete all as specified and directed.

S & F in repairs sheet metal enclosure with single pole and neutral enclosure with a two pin and earth plug and socket with one MCB, SP, 20 Amps, 240 volts, 10 KA complete suitable for AC/watercooler, complete all as specified and directed.

S & F in repairs Aviation obstruction light LED type filament-less bulb complete including standard fixing arrangements including timer switch complete all as specified and as directed Make : Bajaj cat part No BGAV 302 LED or equivalent in /Havells/Philips/Wipro

Supply and replacement of LED driver suitable for 36 watt LED panel(2X2feet) light of any type complete all as specified and as directed.

Supply and replacement of LED driver suitable for 25/45 watt LED street light of any type complete all as specified and as directed.

Supply and replacement of LED driver suitable for 10-20 watt LED square and round recess light of any type complete all as specified and as directed.

Supply and fixing in repair modular switch socket combination with & including back cover plate modular 3-6 module 2 pin & 3 pin 5Amp, 230 volt, multipurpose, 2 screw to fix on board complete all as specified and as directed.

Supply and fixing in repair modular switch socket combination with & including back cover plate modular 3-6 module 2in 1 type, 3 pin 5 / 15Amp, 230 volt, multipurpose, 4 screws to fix on board complete all as specified and as directed.

M&L for removing the old rusted DB/steel DB covers of any specification and any type complete after dressing the cable of any size and securing it properly and filling the cavity/blank space with cement mortar of 1:3/brick masonary work and applyingcement based putty on wall surface to achive even and smooth surface and applying two coat of oil bound distemper on wall including primer complete and fixing the new/old existing DB of any specification all as directed and specified . Note : New DBs if required shall be measured separately under relevent item .

S & F in repairs GI powder coated louvers suitable for exhaust fans 300mm sweep including replacing copper conductor wire complete all as specified and as directed. [Note: Quoted rate is deemed to be inclusive for necessary scaffolding as required for work at any height]

S & F PVC cable tray of size 100mm width, 50mm depth fixed with and including necessary end joints,T-bends and other accessories, MS clamps, nuts, bolts fixed to walls / ceiling including taking down old cable tray complete all as specified and as directed.

M&L Earthing complete with GI plate electrode 600x600x6mm thick, buried directly and vertically in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected with GI earth strip of 25X4 mm by means of bolts, nuts, check nuts and washers of GI or steel all as shown in electrical plate No 3, connected to earthing with DBs all as specified including earth work and excavation in any type of soil, PCC 1:3:6 type C1 chamber,CI frame with CI 10mm thick cover, 20mm dia GI medium grade pipe for watering , and water funnel with wirw mesh, 40mm dia light grade GI pipe for protection of strip complete all as specified and testing on completion.

M&L Earthing complete with GI plate electrode 600x600x6mm thick, buried directly and vertically in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected with GI earth wire 4 mm dia by means of bolts, nuts, check nuts and washers of GI or steel all as shown in electrical plate No 3, connected to earthing with DBs all as specified including earth work and excavation in any type of soil, PCC 1:3:6 type C1 chamber,CI frame with CI 10mm thick cover, 20mm dia GI medium grade pipe for watering , and water funnel with wirw mesh, 40mm dia light grade GI pipe for protection of strip complete all as specified and testing on completion.

M & L for taking down existing electric geysers of any type and capacity including dismantling the spares and cleaning, servicing the geyser by descaling inner body of water tank and cleaning it with soap and acid mixed water, brazing or welding of tank as required and reassembling the geyser set and refixing the same in original position including checking for proper function complete all as directed by Engr-in-Charge. [Note: Quoted rate is deemed to be inclusive for any minor spares such as nut & bolt auto cut, washers, indicating lamp etc as required. However geyser element & thermostat shall be measured and paid seperately]

S & F in repairs geyser element 1.5 KW capacity complete all as specified and directed

S & F in repairs Thermostat of necessary capacity complete all as specified and directed

Supply & Fix in repairs Hot and cold pipes complete along with ncessary nuts and bolts as required complete all as specified and directed.

M&L for 4mm dia GI earth wire for earthing connection to building including all fittings and nuts and bolts etc complete all as specified and directed.

M&L for 25x4mm galvanised iron strip for earthing connection to building including all fittings and nuts and bolts etc complete all as specified and directed.

M&L Switch flame proof switch socket and plug combined in LM6 cable termination box in LM6 ,16A 250 volt,2P+earth complete all as specified and directed.

M&L Switch flame proof rotary type with termination box in LM6, 16A, single pole 250V complete all as specified and directed.

M&L for Rewinding of rolling shutter/hanger door motor of capacity up to 7.5HP, with super enameled copper wire of appropriate gauge including replacement of insulating materials such as laminated lethroid paper, sleeves, necessary varnishing with golden colour varnish, greasing the bearings, replacement of missing / worn out nuts, bolts & washers, split pins etc.including repairing and overhauling the gear box assembly by metal filling, cutting and other maching process in lathe complete including replacement of bearing of suaitable size and chain link and spocket with mounting shaft complete all as specified and directed .

M&L for Rewinding of fire boster pump motor of capacity up to 7.5HP, with super enameled copper wire of appropriate gauge including replacement of insulating materials such as laminated lethroid paper, sleeves, necessary varnishing with golden colour varnish, greasing the bearings, replacement of missing / worn out nuts, bolts & washers, split pins etc. complete including replacement of bearing of suaitable size all as specified and directed .

M&L for replacement of startor single phase/3Phase DOL type suitable for hanger/rolling shutter two way revolving type (clockwise and anticlockwise both type) complete all as specified and directed

M&L for replacement of startor 3 Phase DOL type suiatable for pump of capacity 7.5HP complete all as specified and directed

M&L for limit switch LSRS 10A-125,250 or 480 V AC suitable for shutter/hanger door complete all as specified and directed

S & F in repairs Wall mounted Alternating current plug and socket distribution box (Industrial socket) including plug connector of 32 Amps, 3 pole, neutral and earth, IP 44 protection of metal body three phase 415 Volts, 50 Hz with provision for one 32 Amps MCB TPN including necessary fixing arrangements complete all as directed by the Engineer-in-Charge.

S&F in repairs LED driver suitable for upto 60 watt flame proof flood/ bulk head light fitting of any type/make complete all as specified

S & F in repairs GI powder coated louvers suitable for exhaust fans 600mm sweep including replacing copper conductor wire complete all as directed. [Note: Quoted rate is deemed to be inclusive for necessary scaffolding as required for work at any height]

S & F 2mm thick GI hot dip galvanised / powder coated perforated type cable trays of size 100mm width, 50mm depth fixed with and including necessary MS clamps, nuts, bolts fixed to walls / ceiling including taking down old cable tray complete all as directed

Supply and fixing Sandwich bus bar trunking with Aluminium conductors, class F insulation, epoxy painted 1.6mm GS housing, Uniblock joints between sections, Systems 415 V, 3 Phase, 4 Wire with 100% Neutral without internal earth Degree of Protection Rating -250 Amps all as specified and as directed.

Plug-in Box for tapping of 3 Phase supply in each floor and equipped with MCCB, 100 Amps, TPN, 25 KA, 415 Volts complete all as specified and as directed.

M & L for servicing of solar water heater with solar panel complete including necessary cleaning, brazing / welding & jointing of inlet outlet pipes, tanks,solar panels etc as per the site requirement and testing & checking of solar water heater and making in working condition using all necessary minor spares complete all as specified and directed

koneru enterprises

ANJALI ENTERPRISES

NIKESH ENTERPRISES

KANAKAJYOTHI ENTERPRISES

KRISHNA ENGINEARING

M/S SRI VENKATA BHAVANI CONSTRUCTIONS

SRI SAI VAGDEVI BUILDERS

S R CONSTRUCTIONS