Supply, delivery and installation of open Air Gym Equipment (5Nos), Polycarbonate Roof sheeting for existing Gazebos in NTR Park in 9th division of RMC.

Earth work for Ordinary Soil excavation for structures as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious materials and disposal upto a lead of 0.50Mtrs. Dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD/ 304 MORTH VP No. 484.

Carting away of excavated earth / debries to a lead of 2KM (the rate including conveyance charges, labour charges for loading, unloading charges) including ideal hire charges of truck etc. complete as directed by the Departmental Authorities of the work.

Collection and supply of 2.36mm to 5mm HBG Chipse/Quarry dust from approved quarry including cost and conveyance of all materials and spreading the same to irrespective thickness including sectioning, levelling ramming and watering etc. complete as per S.S. and as directed by the Site Engineer.

Providing Plain Cement concrete (1:4:8) (Cement: fine aggregate: coarse aggregate) for foundations and under flooring bed using coarse aggregate 40mm size hard machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, excluding seigniorage charges, on all materials including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15cm layers finishing top surface to the required level curing etc. complete for finished item of work (APSS No. 402).

Providing Flooring with Cement Concrete 1:6:10, using 40mm metal, 100mm thick and plastered over with 12 mm thick in CM(1:3) including seigniorage charges, etc., complete for finished item of work complete for finished item of work, including cost and conveyance of all materials and all labour charges etc., complete as per ss and as directed by the site engineer.

Masonry work in CM (1:6) prop with Flyash Cement solid blocks of size 290 x 225 x 140 mm for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs. Gypsum of 5 kgs. and stone dust including cost and conveyance of all materials, labour charges, scaffolding and curing etc., complete with a compresive streangth not lessthan 75 kg/sq.cm for walls for Superstructure Walls including cost and conveyance of all materials and all labour charges etc., complete as per ss and as directed by the site engineer.

Providing Plastering with CM (1:3), 12 mm thick including cost and conveyance of all materials like cement, sand, water etc. to site excluding Seigniorage Charges, including all operational, incidential charges on materials and cost of all labour charges for mixing motor, finishing, curing as directed by engineer-in-charge etc. complete for finished item of work (SS 901, 903 & 904)

Collection and supply of Gravel from approved quarry including cost of material, conveyance to work spot and spreading the same irrespective thickness including all labour charges etc complete as directed by the site engineer.

Providing mural arts decorative theme on walls for giving good visual theme to the visitors, tourists etc., including overall cleaning of surface of walls, painting on primary coat and two coats of acrylic emulsion medium of APEX Ultima weather proof exterior painting and as per the directions of concerened officials of Rajamahendravaram Municipal Corporation and as per the approved design etc., cost including all materials tools artists/ painter charges scaffolding etc., and conveyance of all materials to site complete as direct by the departmental authorities.

Foundation and errection of the Open gym equipment/ Play equipment duly making suitable earth pit, Concrete of 1:2:4 not less than 600mmx 600mm x 900mm for each pedesttals and required steel / J' bolts of minimum 20mm dia etc including cost of material and conveaynce to work spot and all labour charges etc complete as directed by the departmental authorities.(LR).

Supply, Delivery & Fixing of MS fabrication works., as directed by Engineer-in-charge of the work, the rate includes fabrication, transportation, erection & fixing at work site and painting with red oxide coat etc., and overheads & contractors profit complete for finished item of work

Roofing with UV resistant multi - wall poly carbonate sheets for roofing of any colour -10mm thick fixed with G.I ‘J’ bolts & nuts 8 mm dia with bitumen & G.I limpet washers filled with white lead & including material & labour charges and overheads & contractors profit etc., complete, excluding the cost of purlins, rafters, trusses & cost of conveyance of all materials..

Supply and installation of a heavy-duty, weather-resistant 40 mm wide Universal Aluminium Glazing Profile System engineered for jointing, edge-securing, and clamping multiwall or solid polycarbonate sheets over structural framing

Supplying and fixing 90 mm dia ppr stand ball valve confirming to din standards 8077/8092, including cost and conveyance of all materials to site, labour etc., complete for finished item of work.

Supply and fixing of UPVC Pipes and Fittings SCH40 Grade to meet the requirement of ASTMD 2846 for hot and cold water (IS 15778:2007) including cost and conveyance of all materials to site, labor charges for fixing, overheads & contractors profit complete for finished item of work at all floor levels. For 110mm dia OD Pipe

Supply and fixing of UPVC Pipes and Fittings SCH40 Grade to meet the requirement of ASTMD 2846 for hot and cold water (IS 15778:2007) including cost and conveyance of all materials to site, labor charges for fixing, overheads & contractors profit complete for finished item of work at all floor levels. For 125mm dia OD Pipe

Supply, Delivery and Commissioning of DOUBLE CHEST PRESS with main vertical and structural support post shall be of minimum 114mm NB dia of thickness not less than 3.00mm, operating arms and lever mechanism shall be minimum of 60mm NB dia of thickness not less than 3.00mm, and seat/backrest support frames or secondary members shall be minimum of 32mm NB dia of thickness not less than 3.60mm are of 'C' class heavy grade of TATA/JINDAL make with hot dipped galvanized with minimum of 75 microns zinc dipped joint with robotic welded with comfortable hand grips made from high quality rubber/nylon material. The moving lever arms are hinged over heavy-duty support brackets with the help of specially heavy duty bearings should be reputed make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance - free ball bearing. All pipes shall be uniformly powder coated up to minimum 100 microns thickness to avoid corrosion. All open ends of pipes, bearings, bushes and Base cover shall be closed by SS 304 grade Stainless Steel for safety against entrapment, corrosion & water resistant. The foundation pipe with anchoring shall be 750mm deep with minimum of 100mm NB dia supported with M.S. Angle 25X25X4mm. The instruction plate of size 150mmX230mm of SS 304 grade Plate with 0.7mm thick shall be riveted on 5mm thick plate with APG&BC emblem and your company emblem at two sides facing to users with LASER printing. All plastic/seat parts should solid poly propylene Co-Polymer (PPCP) and UV- stabilized should be used. All products of equipment should be manufactured as per EN 16630 safety norms and to be produced proof of valid certificate conformity to EN16630 of approved make/ SANSUN as directed by the officer incharge of work.

Supply, Delivery and Commissioning of SKY WALKER with main frame shall be minimum of 80mm NB dia of thickness not less than 4.50mm & Handle pipes shall be minimum of 25mm NB dia of thickness not less than 3.60mm are of 'C' class heavy grade of TATA/JINDAL make with hot dipped galvanized with minimum of 75 microns zinc dipped joint with robotic welded with Plastic/Rubber grips on top end. The handle pipes are hinged over 80NB main frame with the help of specially heavy duty bearings should be reputed make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance - free ball bearing. The handle pipes shall be further extended to the 32mm NB dia on both sides. Paired rectangular tubes with four foot rests are linked to main frame. Foot rest shall be made of Aluminum material - LM26 grade. Total structure is supported on base frame shall be made up of rectangular pipe of 50X50X3mm and side frames shall be made up of 32mm NB dia GI Pipes. All pipes shall be uniformly powder coated up to minimum 100 microns thickness to avoid corrosion. All open ends of pipes, bearings, bushes and Base cover shall be closed by SS 304 grade Stainless Steel for safety against entrapment, corrosion & water resistant. The foundation pipe with anchoring shall be 750mm deep with minimum of 100mm NB dia supported with M.S. Angle 25X25X4mm. The instruction plate of size 150mmX230mm of SS 304 grade Plate with 0.7mm thick shall be riveted on 5mm thick plate with APG&BC emblem and your company emblem at two sides facing to users with LASER printing. All plastic parts should solid poly propylene Co-Polymer (PPCP) and UV- stabilized should be used. All products of equipment should be manufactured as per EN 16630 safety norms and to be produced proof of valid certificate conformity to EN16630.of approved make/ SANSUN as directed by the officer incharge of work'

Supply, Delivery and Commissioning of THAI CHI SPINNER 4 WHEEL with center pipe shall be of minimum 100mm NB dia of thickness not less than 5.00mm, Support frame shall be minimum of 32mm NB dia of thickness not less than 3.6mm & TAI CHI SPINNER rings shall be minimum of 25mm NB dia of thickness not less than 3.60mm are of 'C' class heavy grade of TATA/JINDAL make with hot dipped galvanized with minimum of 75 microns zinc dipped joint with robotic welded with Handle knobs are made from high quality nylon material. The rings are hinged over 32NB support frame with the help of specially heavy duty bearings should be reputed make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance - free ball bearing. All pipes shall be uniformly powder coated up to minimum 100 microns thickness to avoid corrosion. All open ends of pipes, bearings, bushes and Base cover shall be closed by SS 304 grade Stainless Steel for safety against entrapment, corrosion & water resistant. The foundation pipe with anchoring shall be 750mm deep with minimum of 100mm NB dia supported with M.S. Angle 25X25X4mm. The instruction plate of size 150mmX230mm of SS 304 grade Plate with 0.7mm thick shall be riveted on 5mm thick plate with APG&BC emblem and your company emblem at two sides facing to users with LASER printing. All plastic parts should solid poly propylene Co-Polymer (PPCP) and UV- stabilized should be used. All products of equipment should be manufactured as per EN 16630 safety norms and to be produced proof of valid certificate conformity to EN16630. of approved make/ SANSUN as directed by the officer incharge of work'

Supply, Delivery and Commissioning of DOUBLE AIR WALKER with three prime stand pipes shall be minimum of 100mm NB dia of thickness not less than 5.00mm, Pedestal frame shall be minimum of 32mm NB dia of thickness not less than 3.6mm & Handle frame shall be minimum of 25mm NB dia of thickness not less than 3.60mm are of 'C' class heavy grade of TATA/JINDAL make with hot dipped galvanized with minimum of 75 microns zinc dipped joint with robotic welded. The two pedestal frames are hinged over 100NB prime stand pipes with the help of specially heavy duty bearings should be reputed make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance - free ball bearing. Foot rest shall be made of Aluminum material - LM26 grade. All pipes shall be uniformly powder coated up to minimum 100 microns thickness to avoid corrosion. All open ends of pipes, bearings, bushes and Base cover shall be closed by SS 304 grade Stainless Steel for safety against entrapment, corrosion & water resistant. The foundation pipe with anchoring shall be 750mm deep with minimum of 100mm NB dia supported with M.S. Angle 25X25X4mm. The instruction plate of size 150mmX230mm of SS 304 grade Plate with 0.7mm thick shall be riveted on 5mm thick plate with APG&BC emblem and your company emblem at two sides facing to users with LASER printing. All plastic parts should solid poly propylene Co-Polymer (PPCP) and UV- stabilized should be used. All products of equipment should be manufactured as per EN 16630 safety norms and to be produced proof of valid certificate conformity to EN16630. of approved make/ SANSUN as directed by the officer incharge of work'

Supply, Delivery and Commissioning of SEATED PULLER DOUBLE with prime stand pipe shall be minimum of 100mm NB dia of thickness not less than 5.00mm, Handle frame & Seat frame shall be minimum of 32mm NB dia of thickness not less than 3.6mm & Connecting links shall be minimum of 25mm NB dia of thickness not less than 3.60mm are of 'C' class heavy grade of TATA/JINDAL make with hot dipped galvanized with minimum of 75 microns zinc dipped joint with robotic welded. The two handle frames are hinged over 100NB prime stand pipe with the help of specially heavy duty bearings should be reputed make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance - free ball bearing. Seat & Back rests are made with the GI Sheet of size 330X330X2mm with uniform bending radius to avoid sharp edges. All pipes shall be uniformly powder coated up to minimum 100 microns thickness to avoid corrosion. All open ends of pipes, bearings, bushes and Base cover shall be closed by SS 304 grade Stainless Steel for safety against entrapment, corrosion & water resistant. The foundation pipe with anchoring shall be 750mm deep with minimum of 100mm NB dia supported with M.S. Angle 25X25X4mm. The instruction plate of size 150mmX230mm of SS 304 grade Plate with 0.7mm thick shall be riveted on 5mm thick plate with APG&BC emblem and your company emblem at two sides facing to users with LASER printing. All plastic parts should solid poly propylene Co-Polymer (PPCP) and UV- stabilized should be used. All products of equipment should be manufactured as per EN 16630 safety norms and to be produced proof of valid certificate conformity to EN16630. of approved make/ SANSUN as directed by the officer incharge of work'

Earth work for Ordinary Soil excavation for structures as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious materials and disposal upto a lead of 0.50Mtrs. Dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD/ 304 MORTH VP No. 484.

Carting away of excavated earth / debries to a lead of 2KM (the rate including conveyance charges, labour charges for loading, unloading charges) including ideal hire charges of truck etc. complete as directed by the Departmental Authorities of the work.

Collection and supply of 2.36mm to 5mm HBG Chipse/Quarry dust from approved quarry including cost and conveyance of all materials and spreading the same to irrespective thickness including sectioning, levelling ramming and watering etc. complete as per S.S. and as directed by the Site Engineer.

Providing Plain Cement concrete (1:4:8) (Cement: fine aggregate: coarse aggregate) for foundations and under flooring bed using coarse aggregate 40mm size hard machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, excluding seigniorage charges, on all materials including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15cm layers finishing top surface to the required level curing etc. complete for finished item of work (APSS No. 402).

Providing Flooring with Cement Concrete 1:6:10, using 40mm metal, 100mm thick and plastered over with 12 mm thick in CM(1:3) including seigniorage charges, etc., complete for finished item of work complete for finished item of work, including cost and conveyance of all materials and all labour charges etc., complete as per ss and as directed by the site engineer.

Masonry work in CM (1:6) prop with Flyash Cement solid blocks of size 290 x 225 x 140 mm for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs. Gypsum of 5 kgs. and stone dust including cost and conveyance of all materials, labour charges, scaffolding and curing etc., complete with a compresive streangth not lessthan 75 kg/sq.cm for walls for Superstructure Walls including cost and conveyance of all materials and all labour charges etc., complete as per ss and as directed by the site engineer.

Providing Plastering with CM (1:3), 12 mm thick including cost and conveyance of all materials like cement, sand, water etc. to site excluding Seigniorage Charges, including all operational, incidential charges on materials and cost of all labour charges for mixing motor, finishing, curing as directed by engineer-in-charge etc. complete for finished item of work (SS 901, 903 & 904)

Collection and supply of Gravel from approved quarry including cost of material, conveyance to work spot and spreading the same irrespective thickness including all labour charges etc complete as directed by the site engineer.

Providing mural arts decorative theme on walls for giving good visual theme to the visitors, tourists etc., including overall cleaning of surface of walls, painting on primary coat and two coats of acrylic emulsion medium of APEX Ultima weather proof exterior painting and as per the directions of concerened officials of Rajamahendravaram Municipal Corporation and as per the approved design etc., cost including all materials tools artists/ painter charges scaffolding etc., and conveyance of all materials to site complete as direct by the departmental authorities.

Foundation and errection of the Open gym equipment/ Play equipment duly making suitable earth pit, Concrete of 1:2:4 not less than 600mmx 600mm x 900mm for each pedesttals and required steel / J' bolts of minimum 20mm dia etc including cost of material and conveaynce to work spot and all labour charges etc complete as directed by the departmental authorities.(LR).

Supply, Delivery & Fixing of MS fabrication works., as directed by Engineer-in-charge of the work, the rate includes fabrication, transportation, erection & fixing at work site and painting with red oxide coat etc., and overheads & contractors profit complete for finished item of work

Roofing with UV resistant multi - wall poly carbonate sheets for roofing of any colour -10mm thick fixed with G.I ‘J’ bolts & nuts 8 mm dia with bitumen & G.I limpet washers filled with white lead & including material & labour charges and overheads & contractors profit etc., complete, excluding the cost of purlins, rafters, trusses & cost of conveyance of all materials..

Supply and installation of a heavy-duty, weather-resistant 40 mm wide Universal Aluminium Glazing Profile System engineered for jointing, edge-securing, and clamping multiwall or solid polycarbonate sheets over structural framing

Supplying and fixing 90 mm dia ppr stand ball valve confirming to din standards 8077/8092, including cost and conveyance of all materials to site, labour etc., complete for finished item of work.

Supply and fixing of UPVC Pipes and Fittings SCH40 Grade to meet the requirement of ASTMD 2846 for hot and cold water (IS 15778:2007) including cost and conveyance of all materials to site, labor charges for fixing, overheads & contractors profit complete for finished item of work at all floor levels. For 110mm dia OD Pipe

Supply and fixing of UPVC Pipes and Fittings SCH40 Grade to meet the requirement of ASTMD 2846 for hot and cold water (IS 15778:2007) including cost and conveyance of all materials to site, labor charges for fixing, overheads & contractors profit complete for finished item of work at all floor levels. For 125mm dia OD Pipe

Supply, Delivery and Commissioning of DOUBLE CHEST PRESS with main vertical and structural support post shall be of minimum 114mm NB dia of thickness not less than 3.00mm, operating arms and lever mechanism shall be minimum of 60mm NB dia of thickness not less than 3.00mm, and seat/backrest support frames or secondary members shall be minimum of 32mm NB dia of thickness not less than 3.60mm are of 'C' class heavy grade of TATA/JINDAL make with hot dipped galvanized with minimum of 75 microns zinc dipped joint with robotic welded with comfortable hand grips made from high quality rubber/nylon material. The moving lever arms are hinged over heavy-duty support brackets with the help of specially heavy duty bearings should be reputed make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance - free ball bearing. All pipes shall be uniformly powder coated up to minimum 100 microns thickness to avoid corrosion. All open ends of pipes, bearings, bushes and Base cover shall be closed by SS 304 grade Stainless Steel for safety against entrapment, corrosion & water resistant. The foundation pipe with anchoring shall be 750mm deep with minimum of 100mm NB dia supported with M.S. Angle 25X25X4mm. The instruction plate of size 150mmX230mm of SS 304 grade Plate with 0.7mm thick shall be riveted on 5mm thick plate with APG&BC emblem and your company emblem at two sides facing to users with LASER printing. All plastic/seat parts should solid poly propylene Co-Polymer (PPCP) and UV- stabilized should be used. All products of equipment should be manufactured as per EN 16630 safety norms and to be produced proof of valid certificate conformity to EN16630 of approved make/ SANSUN as directed by the officer incharge of work.

Supply, Delivery and Commissioning of SKY WALKER with main frame shall be minimum of 80mm NB dia of thickness not less than 4.50mm & Handle pipes shall be minimum of 25mm NB dia of thickness not less than 3.60mm are of 'C' class heavy grade of TATA/JINDAL make with hot dipped galvanized with minimum of 75 microns zinc dipped joint with robotic welded with Plastic/Rubber grips on top end. The handle pipes are hinged over 80NB main frame with the help of specially heavy duty bearings should be reputed make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance - free ball bearing. The handle pipes shall be further extended to the 32mm NB dia on both sides. Paired rectangular tubes with four foot rests are linked to main frame. Foot rest shall be made of Aluminum material - LM26 grade. Total structure is supported on base frame shall be made up of rectangular pipe of 50X50X3mm and side frames shall be made up of 32mm NB dia GI Pipes. All pipes shall be uniformly powder coated up to minimum 100 microns thickness to avoid corrosion. All open ends of pipes, bearings, bushes and Base cover shall be closed by SS 304 grade Stainless Steel for safety against entrapment, corrosion & water resistant. The foundation pipe with anchoring shall be 750mm deep with minimum of 100mm NB dia supported with M.S. Angle 25X25X4mm. The instruction plate of size 150mmX230mm of SS 304 grade Plate with 0.7mm thick shall be riveted on 5mm thick plate with APG&BC emblem and your company emblem at two sides facing to users with LASER printing. All plastic parts should solid poly propylene Co-Polymer (PPCP) and UV- stabilized should be used. All products of equipment should be manufactured as per EN 16630 safety norms and to be produced proof of valid certificate conformity to EN16630.of approved make/ SANSUN as directed by the officer incharge of work'

Supply, Delivery and Commissioning of THAI CHI SPINNER 4 WHEEL with center pipe shall be of minimum 100mm NB dia of thickness not less than 5.00mm, Support frame shall be minimum of 32mm NB dia of thickness not less than 3.6mm & TAI CHI SPINNER rings shall be minimum of 25mm NB dia of thickness not less than 3.60mm are of 'C' class heavy grade of TATA/JINDAL make with hot dipped galvanized with minimum of 75 microns zinc dipped joint with robotic welded with Handle knobs are made from high quality nylon material. The rings are hinged over 32NB support frame with the help of specially heavy duty bearings should be reputed make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance - free ball bearing. All pipes shall be uniformly powder coated up to minimum 100 microns thickness to avoid corrosion. All open ends of pipes, bearings, bushes and Base cover shall be closed by SS 304 grade Stainless Steel for safety against entrapment, corrosion & water resistant. The foundation pipe with anchoring shall be 750mm deep with minimum of 100mm NB dia supported with M.S. Angle 25X25X4mm. The instruction plate of size 150mmX230mm of SS 304 grade Plate with 0.7mm thick shall be riveted on 5mm thick plate with APG&BC emblem and your company emblem at two sides facing to users with LASER printing. All plastic parts should solid poly propylene Co-Polymer (PPCP) and UV- stabilized should be used. All products of equipment should be manufactured as per EN 16630 safety norms and to be produced proof of valid certificate conformity to EN16630. of approved make/ SANSUN as directed by the officer incharge of work'

Supply, Delivery and Commissioning of DOUBLE AIR WALKER with three prime stand pipes shall be minimum of 100mm NB dia of thickness not less than 5.00mm, Pedestal frame shall be minimum of 32mm NB dia of thickness not less than 3.6mm & Handle frame shall be minimum of 25mm NB dia of thickness not less than 3.60mm are of 'C' class heavy grade of TATA/JINDAL make with hot dipped galvanized with minimum of 75 microns zinc dipped joint with robotic welded. The two pedestal frames are hinged over 100NB prime stand pipes with the help of specially heavy duty bearings should be reputed make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance - free ball bearing. Foot rest shall be made of Aluminum material - LM26 grade. All pipes shall be uniformly powder coated up to minimum 100 microns thickness to avoid corrosion. All open ends of pipes, bearings, bushes and Base cover shall be closed by SS 304 grade Stainless Steel for safety against entrapment, corrosion & water resistant. The foundation pipe with anchoring shall be 750mm deep with minimum of 100mm NB dia supported with M.S. Angle 25X25X4mm. The instruction plate of size 150mmX230mm of SS 304 grade Plate with 0.7mm thick shall be riveted on 5mm thick plate with APG&BC emblem and your company emblem at two sides facing to users with LASER printing. All plastic parts should solid poly propylene Co-Polymer (PPCP) and UV- stabilized should be used. All products of equipment should be manufactured as per EN 16630 safety norms and to be produced proof of valid certificate conformity to EN16630. of approved make/ SANSUN as directed by the officer incharge of work'

Supply, Delivery and Commissioning of SEATED PULLER DOUBLE with prime stand pipe shall be minimum of 100mm NB dia of thickness not less than 5.00mm, Handle frame & Seat frame shall be minimum of 32mm NB dia of thickness not less than 3.6mm & Connecting links shall be minimum of 25mm NB dia of thickness not less than 3.60mm are of 'C' class heavy grade of TATA/JINDAL make with hot dipped galvanized with minimum of 75 microns zinc dipped joint with robotic welded. The two handle frames are hinged over 100NB prime stand pipe with the help of specially heavy duty bearings should be reputed make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance - free ball bearing. Seat & Back rests are made with the GI Sheet of size 330X330X2mm with uniform bending radius to avoid sharp edges. All pipes shall be uniformly powder coated up to minimum 100 microns thickness to avoid corrosion. All open ends of pipes, bearings, bushes and Base cover shall be closed by SS 304 grade Stainless Steel for safety against entrapment, corrosion & water resistant. The foundation pipe with anchoring shall be 750mm deep with minimum of 100mm NB dia supported with M.S. Angle 25X25X4mm. The instruction plate of size 150mmX230mm of SS 304 grade Plate with 0.7mm thick shall be riveted on 5mm thick plate with APG&BC emblem and your company emblem at two sides facing to users with LASER printing. All plastic parts should solid poly propylene Co-Polymer (PPCP) and UV- stabilized should be used. All products of equipment should be manufactured as per EN 16630 safety norms and to be produced proof of valid certificate conformity to EN16630. of approved make/ SANSUN as directed by the officer incharge of work'

Details of Maximum amount reimbursable to the Contractor.

1) Provision for GST @18%

2) Provision for NAC @ 0.10%

3) Provision for Seigniorage charges

4) DMF @30% on Seigniorage charges

5) MERIT @2% on Seigniorage charges

6) Consideration 100% on Seigniorage charges