Building

Item Rate In

specification and reference to book of Quantity Unit Amount

No figures

specifications)

1 Item No. 1 Dismentaling tiled of stone 100.00 Smt. 47.72

floors laid in mortar including stacking of

serviceable materilas and disposal of

unserviceable materials with all lead and

2 Item No. 2 : Demolition of brick work & 10.00 Cmt 550.40

stone masonry incl. Stacking of servicable

materials and disposal of unservicable

materials with all lead and lift. (III) In

cement mortar.

3 Item No. 3 : Dismantling doors, windows, 15.00 No. 187.71

ventilators etc. (wood or steel) shutters

incl. Chowkhats, architraves, hold fasts

and other attachment etc. complete and

stacking them within all lead & lift.

4 Item No. 4: Dismantling sanitary fittings 15.00 No. 405.65

like wash basin, W.C. pan Indian and

European type, flushing tank etc including

stacking the materials with all lead and lift.

5 Item No. 5: Removing & Refixing of 20.00 Smt. 555.50

wooden / alluminum Partion such as that

plywood / glass / laminated sheet / wooden

frame / alluminum frame should be used

of opening materials with necessary nails

screw etc. complete.

6 Item No. 6 Providing and laying Vitrified 20.00 Smt 1073.13

tiles 8to10 mm thick, 24''x24'' in flooring

treads of steps and landing laid on a bed of

12mm thick cement mortar 1:3 (1-

cement:3-coarsesand) finishing with flush

pointing in white cement.

7 Item No. 7: Labour charges for refixixing 10.00 Smt 422.18

G.I. Sheets with iron J or L hooks, bolts &

Nuts 8 mm dia mt. with bitumen & G.I.

impet wshers filled with white lead

8 Item No. 8 : Brick work using common 5.00 Cmt. 4295.99

burnt clay building bricks having crushing

strength not less than 35 Kg. / sq. CM in

super structure above plinth level up to

floor two level (B) convention in cement

mortar 1:6 (1 cement : 6 fine sand)

9 Item No. 9 : Half brick masonry in 15.00 Smt. 716.53

common burnt clay builking bricks having

crushing strength not less than work using

common burnt clay building bricks having

crushing strength not less than 35 Kg. / sq.

CM in cement mortar 1 :4 (1 cement :

coarse sand) in Superstructure above

plinth level up to floor two level. (B)

Conventional.

10 Item No. 10 : Providing and 15 mm thick 200.00 Smt. 176.58

cement plaster in single coat on brick /

concrete wall for interior plastering up to

floor two level finished even and smooth

in (I) cement mortar 1:3(1 cement : 3 sand)

finishing with a floating coat of neat

cement slurry.

11 Item No. 11 : 20 mm thick sand faced 200.00 Smt. 300.66

cement plaster on walls up to height

meters above ground level consisting of

mm th. Backing coat of cm 1:3 (1 cement

: 3 sand) and 8 mm th. Finishing coat of

CM 1:1 (1 cement : 1 Sand) etc. compl.

12 Item No. 12 : Providing two coats of Birla 250.00 Smt 40.59

or Asian acrylic lapy (putty) & two coats

of primer of approved brand and

manufacture on new wall surface to give

an even shade incl. thoroughly brushing

the surface free from mortar dropping and

other foreign matter and sand papered

13 Item No. 13 : Providing and laying 40.00 Smt. 992.66

polished kota stone slab flooring over

mm (average) thick base of cement mortar

1:6 (1 cement : 6 coarse sand) or L.M.

1:1.5 laid over and jointed with gray

cement slurry including rubbing and

polishing etc.comp(A) 25 mm thick

14 Item No. 14 : Providing and laying 24” x 50.00 Smt. 1189.88

24” Vitrified 8 mm thick Tile flooring over

20 mm (Avg) base of C.M. 1:6 on new

surface or fixing on Extg. Flooring by

adhasive material incl. Dismentalling of

extg. Flooring & jointed with colour

cement slurry finished with flush pointing

& cleaning the surface etc. complete for

light shade.

15 Item No. 15 : Labour charges for mirror 40.00 Smt 303.00

shine polishing on Existing polished kota

Stone flooring including required all

materials & labour etc. complete

16 Item No. 16 : Providing and laying white / 20.00 Smt 1441.22

Colour glazed tiles size 300x450 mm x

mm thick laid on a bed of 12 mm thick

cement mortar 1:3 (1 cement : 3 coarse

sand) finished with flush pointing in white

cement (B) In Flooring /Skirting Risers of

steps and dedo

17 Provoding and fixing flush door shutters, 5.00 Smt 1797.77

solid core construction with frame of first

class hardwood with cross board and face

veneer or plywood face panels, including

anodised alluminium butt hinges with

necessary screws. (B) Non-decorative

type and block board core anodised

alluminium butt hinges in flush door

shutters (2) 35 mm thick.

18 Item No. 18 : Providing & fixing door 4.00 No. 1565.50

screen of approved Quality incl. required

all materials & labour etc. comp. of size

19 Item No. 19 : Providing and fixing 20.00 Smt 2140.33

windows having extruded aluminium

Anodised section frame main outer size

63.50 x 38.10 x 1.95 mm (of jindal section

no.4605 @ Wt. 1.094 Kg/ Rmt) horizontal

two trackmember size 61.85 mm x

mm x 1.20 mm (of jindal section no

@ wt. of 0.695 kg/mt)vertical member of

size 61.85 mm x 31.75 mm x 1.30 mm (of

jindalsection no. 8758 @ wt. of 0.0.659

Kg/mt) with sliding shutter of horizontal

member size 40 mm x 18 mm x 1.29 mm

(of jinda; section no.8949 @ wt. of

Kg/ mt) vertical member of size 40 mm x

18 mm x 1.29 mm (of jindal section no.

8947 @ wt. of 0.456 Kg/ mt section

@ wt. 0.457 kg/ mt) with 5 mm thick

transparent broze colour tinted float glass

with powder coated aluminium fitting and

fixture and fixtures and transparent silicon

sealant glass fixing to frame as per details

etc. complete for.

20 Item No. 20 : Providing & fixing of 4.00 No. 1717.00

approved Quality door closer Godhrej

Make incl. required all materials & labours

21 Item No. 21 : Providing laying and 15.00 Rmt 72.65

joininting in true line and level 15 mm dia.

UPVC pipe (SCH-40) for cold water

including fitting make Prince/Supreme /

Astral/ Finolex or equipment as approved

by engineer in Charge. Pipe shall be fixed

on the wall with the help of clamp at every

two metre C/C or shall be concelled as

directed. including necessary fittings etc.

including testing of pipe and joints and

fixing the same with adhesive solvent,

including cost of all materials.

22 Item No. 22 : Providing laying and 25.00 Rmt 119.15

joininting in true line and level 32 mm dia.

UPVC pipe (SCH-40) for cold water

including fitting make Prince/Supreme /

Astral/ Finolex or equipment as approved

by engineer in Charge. Pipe shall be fixed

on the wall with the help of clamp at every

two metre C/C or shall be concelled as

directed. including necessary fittings etc.

including testing of pipe and joints and

fixing the same with adhesive solvent,

including cost of all materials.

23 Item No. 23 : Providing, laying and 25.00 Rmt 831.22

jointing in true line and level 160 diametre

U.P.V.C (Type B) conforming to IS

13592-1992 with one end plain and other

end socketed with rubber ring, & fittings

conforming to ISI 14735-1999 of

approved make for drainage system pipe

line, pipe shall be jointed with each other

with rubber lubricant, pipe shall be fixed

on wall using of PVC clamp of the size

160 mm diametre x 210 mm length x

mm heigh at every 2000 mm center to

center or shall be concealed in walls as

directed including necessary fittings such

as bends, shoes etc. including testing of

pipes and joints and jointed with adhesive

solvent cement including cost of all

materials.

24 Item No. 24 : Providing and fixing brass 10.00 No. 205.83

screw down stop tap (I) 15 mm dia.

25 Item no- 25 Procdg. & fixing wash basin 5.00 No. 1937.45

with single hole for pillar tap with C.I. or

M.S. brackets painted white incl. Cutting

holes and making good the same but

including fittings.(A) Vitreous China : (II)

Flat back washbasin 550 mm x 400 mm

size (I) In white colour With M.I. fisher

union for Wash basin or sink (A) 32 mm

dia, Provdg. & fixing pillar tap, capstan

head, screw down high pressure with

screws, shanks and back nuts.(B) 20 mm

26 Item no- 26 Provdg. & fixing water closet 5.00 No. 2287.73

squatting pna (European type W.C. Pan)

size 580 mm (Earthwork, bed concrete,

foot rests and trap to be measured and paid

for separately).(A) Vitreous China : (I) In

white colour including 100 mm size P or S

trap, pair of white vitreous China 250 mm

x 130 mm x 30 mm footrest to long pattern

squatting pan water closet. Including

Providing & Fixing Chromium plated

brass half tone flush cock approved quality

uncluding fixing in pipe line etc.

complete. 25 mm dia

27 Item no- 27 Provdg. & fixing urinal of 5.00 No. 1550.99

approved quality incl. Connection trap and

with integral longitudinal flush pipe.(A)

Squatting plate pattern white earthenware

28 Item no. 28 Providing and fixing pre-cast 20.00 Smt 686.90

Rubber Dye inter loking concrete block

mm thick with grade of concrete M

pnumatic compressed by mechanically

pressed and as per approved design

including 75 mm sand layer for levelling

and filling the joint with sand in proper

line and level etc.

29 Item no- 29 Providing and fixing pre cast 10.00 Rmt 361.64

concrete kerb stone of gray cement based

concrete block 30 cm length 30 cm height

and 15 cm thick of M250 grade concrete

as per approved design and including

excavation for fixing in proper line and

level filling the joint with CM 1:3 (1

Cement 3 Fine sand) etc. complete.

30 Item No. 30 Excavation for foundation up 10.00 Cmt 117.08

to 1.5 mt depth including sorting out and

stacking of seful materials and disposing

off the excavated stuff up to 50 Meter lead.

(A) Loose or vSoft soil

31 Item No. 31 Providing & laying Cement 10.00 Cmt 2680.21

concrete 1:4:8 (1 Cement :4 Coarse sand

:8 Machine Crushed stone Aggr. 40 mm

nominal size) and curring complete

Excluding the cost of form work in (A)

Foundation and Plinth etc. compl.

32 Item No. 32 Providing & laying Cement 10.00 Cmt 3697.91

concrete 1:2:4 (1 Cement :2 Coarse sand

:4 Grade stone Aggr. 20 mm nominal size)

and curring complete Excluding the cost

of form work in (A) Foundation and Plinth

etc. compl.

33 Item No. 33 Provi. Providing thermo 200.00 Kg. 76.21

Mechanically treated bars (TMT bars) FE

500 reinforcement for R.C.C. works

including, bending, bindign and placing in

position complete upto floor 2 level.

34 Item no- 34 Provdg & laying cement 15.00 Cmt 8425.21

concrete 1:1.5:3 (1cement : 1.5 coarse

sand :3 graded stone aggregated 20 mm

nominal size) and finishing smooth with

curing etc. complete including the cost of

from work but excluding the cost of

reinforcement for RCC Work in (III) Slab,

Lintel, Beam, Column of any size and

35 Item No. 35 Providing & laying broken 40.00 Smt 747.29

chaina mosaic flooring for plan & curved

surface in any pattern or designed as

directed on terrace 12 to 25 mm size

broken of glazed tiles to be laid over

average 20 mm thick bedding in cm 1:3

mixed with water proofing materials 1 Kg/

10 smt and applying neat cement over

bedding @ 2.0 Kg/ smt and to be temped

to bring clean up to surface and filling

joints with white cement & required

colour including rounding off junction and

extending them up to 15 cms with all

including finishing & curing by making

pond as directed by engineer in charge

including cleaning with oxililc acod.

36 Item no- 36 Distempering (Three coats) 200.00 Smt 107.23

including scraping with oil bound

distemper of approved brand and

manufacture & of required shade on wall

surfaces to give an even shade, over and

incl. a priming coat with distemper primer

of approved brand and manufacture after

thoroughly brushing the surface free from

mortar dropping other foreign matter &

also incl. Preparing the surface even and

37 Item No. 37 : Wall painting (Three coats) 200.00 Smt 112.95

with plastick emulsion paint of approved

brand and manufacture on under coated

wall surface to give an even shade incl.

thoroughly brushing the surface free from

mortar dropping and other foreign matter

and sand papered smooth.

38 Item No. 38 : Finishing Wall with weather 200.00 Smt 114.53

proof exterior emulsion paint on wall

surface (two coats) to give an required

shade even shade after thoroughly

brushing the surface to remove all dirt, and

remains of loose powdered materials etc.

39 Item No. 39 :Pro.And fixing single layer 40.00 Smt. 606.95

waterproof gypsum board 12.5mm thick

sections using waterproof board of size

1220mmx1830mmx8.0mm suspended by

GI suspender channel of size25mmx3mm

with intermediate channel og size 18mm x

40mm x0.8mm at1220 mm center to

center ceiling section of size 40mm

x35mm x0.55 mm at 457mmc/c and per

imeter channel A of size 20mmx 27mmx

30mmx0.5mm at edges & drop sincl.

paper taps and sofit cleat ,anchorfastener

scochbolt connecting cleat, joining

compound top coat on ceiling incl. making

necy.opening for lightfitting,

diffuseretc.comp .as per detail drawing as

40 Item No. 40 : Providign & fixing false 165.00 Smt. 1374.75

Celling of PVC of Sintex brand or

equivelent as approved by Engineer in

charge made up by Sandwitch type 25 to

30 cm wide PVC patta and 6 mm thick

fixing on PVC strip 3" to 4" wide which

hanging by Galvenised wire from Celing

including fixing corner PVC Patties etc.

completed. & Making Hole for light, fan

& Necessaring Feeting.

41 Item No. 41 : Providign & fixing PVC 100.00 Smt. 1249.77

Wall panaling of Sintex brand or

equivelent as approved by Engineer in

charge made up by Sandwitch type 25 to

30 cm wide PVC patta and 6 mm thick

fixing on PVC strip 3" to 4" wide which

fix by screw on wall including fixing

corner PVC Patties etc. completed. &

Making Hole for light, fan & Necessaring

42 Item no- 42 Providing and fixing M.S. 100.00 Kg. 101.17

grills of required pattern to wooden frames

of windows etc. with M.S. Flats at

required spacings and frame alround,

square or round bars with round headed

bolts and nuts or by screws (A) Plain Grill

43 Item No. 43 Dismantling of sheet roofing 100.00 Smt 47.72

incl. ridges, hips, valleys, gutters etc.

stacking of servicable materials with all

lead and lift.(I) G.I. sheet roofing

44 Item No- 44 Steel work welded, in built up 20.00 Qtl 8413.48

sections, framed work including cutting,

hoisting, fixing in position and applying a

priming coat of red lead paint (A) In

beams and joists, channels, angles, tees,

flats with connecting plates or angle cleats

as in main & cross beamnship & jack

rafters, purlins connected to common

rafters and like.

45 Item No- 45 Providing & Fixing 0.60 mm 100.00 Smt 883.75

thick coloured galvanised metal sheet

roofing on Existing structure by using

hilty corroshield SDST scrcus rubber

gasket & Silicon sealant as directed by

Engineer in charge etc. Complete.

46 Item No- 46 Painting two coats (excluding 100.00 Smt 87.81

priming coat) over new steel and other

metal surfaces with enamel paint,

brushing, interior to give aneven shade

including cleaning the surface of all dirt,

dust and other foreign matter.

47 Item No. 47 : Providing and laying Marble 10.00 Smt. 2216.58

stone slab flooring over 20 mm (average)

thick base of cement mortar 1:6 (1 cement

: 6 coarse sand) or L.M. 1:1.5 laid over and

jointed with gray cement slurry including

rubbing and polishing etc.comp(A) 25 mm

48 Item no- 48 Providing and fixing FRP 25.00 Smt. 2019.98

frame size 125 x 65 mm and 35 mm thick

FRP shutter with wood grain raised

panneled design finish shutter having

extra reinforcement on sides & edges in

Gel coat finish. The core of the shutter &

Frame is to be filed up with injected

polyurethene foam done in situ alongwith

embedded wooden pieces for stiffening &

also taking hinges & fintures. The whole

FRPframe & shutter is to e water proof

weather proof, termite proof & resistance

to mild acid/ alkali. Rates are to be

inclusive of S.S. hinges with fastener

sleeve & alluminium fixtures &

fastenings.

49 Item No- 49 Removing and scraping of old 100.00 Smt. 19.57

deteriorated plaster of any thickness

fromm wall / R.C.C member including

stacking of serviceable material and

disposal of unserviceable from site of

work with all lead and lift.

50 Item No- 50 Providing and Fixing 50 mm 100.00 Smt. 311.65

x 50 mm size G.I. wire 2.70 mm dia weld

mesh jali fixing on concrete wall surface

with drilling hole for nails, binding with

binding wire etc. complete including

necessary overlaps cuttings bending as per

instrution given by engineer in charge.

51 Item No- 51 Providing and laying marble 60.00 Smt 2216.58

stone slab flooring over 20mm

(average)base of cement mortar 1:6 (1-

cement : 6 coarse sand) or L.M. 1:1.5(1-

lime putty : 1.5 - coarse sand) laid and

jointed with gray cement slurry including

rubbing and polishing complete. (A)

Marble slab 25mm thick

52 Item No- 52 Providing and fixing PVC 12.00 No. 571.08

SWR Nahnitrap IS14735 for drain-

100mmdiameter with jali of the following

nominal diameter of self cleansing design

withC. Is cread down or hinged grating

including the cost of cutting and making

good the walls.

53 Item No- 53 Providing and fixing 10.00 No. 1292.19

S.W.gully trap with C.I. grating brick

masonry chamber and watertight C.I.cover

with frame of 300mmx300 mmsize

(inside) withstand ardweight .(i)Square

mouthtr aps.(A)100mm x 100mm size P

type. (upto 10 ton)

54 Item No- 54 Providing,laying and jointing 50.00 Rmt. 835.15

in trueline and level 110diametre

U.P.V.C(TypeB) conforming toI S13592-

1992 with one end plain and other end

socketed with rubberring,&fittings

conforming to ISI14735-1999 of approved

make for drainage system pipeline,pipe

shall be jointed with each other with

rubber lubricant,pipe shallbe fixed on wall

using of PVCclamp of the size110

mmdiametr ex149 mmlength x145mm

heighat every 2000mm center to center or

shall be concealed in walls as directed

including necessary fittings such as

bends,shoesetc.including testing of pipe

sand joint sand jointed with adhesive

solvent cement including cost of all

materials.

55 Item No- 55 Providing,laying and jointing 50.00 Rmt. 474.70

in trueline and level 75 diametre

P.V.C(6kg) with one end plain and other

end socketed with rubber ring confirming

to IS 13592 -1992 INCE/ SUPREME/

ASTRAL/ FINOLEX or equivalent as

approved by EngineerInCharge for

drainage pipe line, pipe shall be jointed

with each other with rubber lubricant, pipe

shall be fixed on the wall with the help of

galvanized Z Patti clamp everyb1500mm

C/C or shall be connected in walls as

directed including necessary fittings such

as bends , shoes etc. including testing of

pipes and joints and jointed with adhessive

solvent cement including cost of materials.

56 Item No- 56 Constructing brick masonry 5.00 No. 2932.93

chamber for underground C.I. Inspection

chamber and bends with bricks having

crushing strength not less than 35Kg/Cm2

in C.M. 1:5 C.I. cover with frame (Light

duty) 455mm x 610mm intenal

dimensions total weight of cover with

frame to be not less than 38Kg. (Wt. of

cover 23 Kg.) and Wt. of frame 15Kg. )

(R.C.C. top slabe with 1:2:4 mix (1-

cement :2- coarse sand :4-graded stone

aggregate 20mm size) foundation concrete

1:5:10 inside plaster 15mm thick with

cement mortar 1:3 finished smooth with a

floating coat of neat cement on walls and

bed concrete etc. complete.(i) Inside

dimensions 455mmx 610mm and 450mm

deep for single pipe line.

57 Item no : 57 Providing laying and jointing 10.00 Rmt. 91.84

in trueline and level 25mm

dia.U.P.V.C.Pipe(SCH-40)for coldwater

including fittings make PRINCE/

SUPREME/ ASTRAL/ FINOLEX or

equivalent as approved by Engineer In

Charge .Pipe shallbe fixed on the wall with

the help of clamp at every twometreC/Cor

shall be concelled as directed including

necessary fittings etc. including testing of

pipe and joints and fixing the same with

adhesivesolvent, including cost of all

materials.

58 Item No- 58 Providing and fixing 15mm 50.00 No. 113.12

dia point UPVC coupling with brass

threaded sleeves including fixing with

adhesive chemical or teflon tap as

59 Item No- 59 Providing and making R.C.C. 10.00 Smt. 1616.00

hole with Automatic breaker machine by

not manual with required size for 110 mm

dia whole.

60 Item No- 60 Providing and laying handle 10.00 No. 757.50

valve / Ball valve of "ZOLOTO" brand

forged brass (Art no. 1008B) 25mm

including all nippeles, bends, elbow,tee

adhessive, teflon tap etc required for

complete the job.

61 Item No- 61 Providing and laying handle 10.00 No. 2222.00

valve / Ball valve of "P.V.C 25mm

including all nippeles, bends, elbow,tee

adhessive, teflon tap etc required for

complete the job.

62 Item No- 62 Providing and laying handle 10.00 No. 252.50

valve / Ball valve of "P.V.C 25mm

including all nippeles, bends, elbow,tee

adhessive, teflon tap etc required for

complete the job.

63 Item No- 63 Necessary welding work for 1.00 Job 2525.00

a required job. (for a day work which

consists 8 hours of work)

64 Item No- 64: Labour charges for refixing 50.00 Smt 353.50

G.I. sheets with iron J or L hooks, bolts &

Nuts 8 mm dia mt. with bitumen and G.I

impect washers filled with white lead

65 Item No- 65: Labour charges for Carpenter 1.00 Each 1376.63

1st class and 2nd class.

66 Item No- 66: Labour charges for Plumber 1.00 Each 1223.11

and Plumber Fitter

67 Item No- 67 Carrying out wall treatment 10.00 Smt 37.71

for termite control including spraying with

chemical solution in oil base including

labour and material Using Chlorpyriphos

20 ECAs per IS 6313 part - II (1%

concentration by mass) is recommended

i.e one litre chemical emulsion diluted

with 19 liter oil base. Total solution will be

20 liters inclusive of one liter chemical

emulsion application at the rate of 7.5 litre

chemical / Sqm of surface is

recommended as per I.S.

68 Item No- 68 Providing and fixing 35 mm 10.00 Smt 5338.30

thick shutters for Doors, windows and

clerestory windows including Indian teak

wood frames 10 cm x 7 cm. size including

anodized alluminium fixtures and

fastenings including primer coat of

approved quality and two coats of oil

painting etc, complete. (ii) Fully Panelled.

69 Item No- 69 Providing and Fixing Roller 10.00 Smt 2550.25

Blind as approved shade and Fabric. The

blind shall be made out from Extruded

Aluminum Alloy of 48 mm outer dia tube

shall be supported by ribs to keep it

straight and shall have pocket for holding

a fabric in position and sample approved

70 Item No- 70 Rehabilitation of RCC 10.00 Smt 1721.23

members like Slab, beam, column etc. of a

building and height upto 31.00 m level

externally/ internally by provding double

scaffolding and by chipping off existing

loose , damaged, cracked concrete

etc.from RCC members i.e. columns,

beams, slabs etc up to 6mm beyond

reinforcement, carefully by chiesel and

hammer including cleaning the surface of

the cement concrete and rusted

reinforcement by mechanical wire brush

or by any other established method and

finally remove the loose materials,rust

and dirt with air blowing or by water

jetting etc.and disposal of dismantled

rubbish to the dumping ground by

mechanical transport where permitted by

Municipal Corporation/ Municipality /

Nagarpalika or as directed by Engineer-in

-charge with all lead and lift. Providing

and applying anti corrosive rust remover

"Rusticide" of M/S Sunanda speciality

coating Pvt Ltd or equivalent of approved

brand and manufacture after cleaning the

same with wire brushe and water jet or air

blowing.Apply the solution with cotton

waste swab to reinforcement as per

manufacturer's specification.Application

of a coat of cement slurry made of

Polyyalk Fixoprime of M/S Sunanda

Speciality Coating Private Ltd or

equivalent of approved brand and

manufacture as per manufactures

specification in the weight proportion 1:1

( 1 Polyalk FP : 1 Cement ) or in the

required proportion as per the

manufactures specifications all around the

old reinforcement or new reinforcement

treated as above .( The second coat shall

be applied after a period of six hours )To

ensure proper bonding between old and

new concrete application of bonding coat

of slurry made of Polyalk EP of M/S

Sunanda Speciallty Coating Private Ltd or

of equivalent approved brand and

manufacture in the weight proportion of

1 :2 (1 cement : 2 Polyalk EP ) or as per

manufactures specification over the

cleaned and dried old concrete surface

.Apply Polymer Modified Cement Mortar

upto 25 mm thick to RCC members in two

or more coats, each coat of 10 mm or less

thick with water cement ratio not more

than 0.40 in the proportion of 1:5:15 (1

part Polyalk EP of M/S Sunanda

Speciallity Coatings Private Ltd of

equivalent approved brand and

manufacture : 5 parts of cement : 15 parts

of quartz sand ) by weight including curing

etc. or BASF make "MasterEmaco S-348"

or Parex Group Construction Products

Pvt.Ltd.make "Lanko 732" as required as

per manufacturer's specification

etc.complete.

71 Item No- 71 Providing and executing 10.00 No. 471.52

injection/pressure grouting in cracks in the

parent concrete by fixing PVC nipples at

150mm to 200 mm distance or specified

distance as per design and detailed

specifications. Pressure grouting shall be

done using low viscous epoxy grout

"Monopol" of Krishna Conchem or

"Conbextra EP 10 (M ) of Fosroc make or

"Master Inject 1315" of BASF make,

"Lanko 721" of Parex Group Construction

Products Pvt.Ltd shall be used at required

pressure etc.complete as per specification

and approvals, labour, tools, tackles,

scaffolding etc. complete as directed by

Engineer-in-charge.and sample approved

72 Item No- 72 Providing and fixing 10.00 Smt 160.43

temporary engineered steel tubular

standard double scaffolding system on the

exterior side for the height upto

metre and maintaining it in a serviceable

condition for the required duration as

approved and removingit thereafter. The

scaffolding system shall be stiffened with

bracings,runners,connection with the

building etc with suitable working

platform at required locations with

essential safety features for the workmen

etc, complete as per direction and approval

of Engineer-in-charge. The elevational

area of the scaffolding shall be measured

for payment purpose.

73 Item No- 73 Providing and filling of non 10.00 Rmt 55.98

structural cracks by exposing the line of

crack as per actual requirements at site and

removing all the loose material , dirt etc.

from the crack by brush. The crack shall

be made moist by applying water in the

groove by brush. The same groove shall be

filled withtready mixed paste"

POLYFILL-AR" of Sunanda Speciality

Coatings Pvt. Ltd. crack-X of Dr.Fixit or

Equivalent and making good the walls as

per manufacturer specification and as

required by the Engineer-in-charge up to

any height from ground level.

74 Item No- 74 Providing and laying 1.00 Cmt 22890.64

controlled cement concrete M250 for

Column Jacketting excluding the cost of

reinforcement and form work for all floors

including application of bonding coat of

standard make ROFF or Sunanda

Chemical "Polyalk EP' or Dr. Fixit or

equivalant as directed by Engineer-in-

charge in proportion 1:1 (1 cement :

Repair Chemical) by Volume for all the

height etc. including demolition of brick

masonary, plaster, drilling the hole 75 mm

deep and providing shear connector to the

column etc. complete.

75 Item No- 75 Applying two or more coats 10.75 Smt 264.82

of Polymeric water proofing

chemical"POLYALK-WP" or equivalent

over the existing water proofing surface to

make it leak proof . The surface to be

treated with the chemical shall be made

free of loose materials and should be

properly cleaned . Any cracks shall be

filled with mortar consisting of

"POLYALK-WP" and cement in the

proportion (by weight ) of 1:1.25 (

cement : 1.25 polyalk-WP)The surface

shall be made moist before making the

application of the solution. The mortar

made from Polyalk -WP and cement in the

proportion (by weight ) 1:1.25 ( 1 cement

: 1.25 polyalk-WP) shall be applied on the

moist surface after stirring the solution

gently for 4 to 5 minutes . Apply the

second and third coat of chemical if

required at 24 hours duration as directed

by the Engineer-in-charge.Note:- No

water shall be added in the mixing of

cement and POLYALK-WP.Cure the

coating for 7 days by sprinkling water

three times a day on the vertical surface

and using moist gunny bags on horizontal

surface(terrace).(a) Two or more coats.

76 Item No- 76 Propping and supporting the 10.00 Nos 401.40

structural members and its adjoining areas

with steel props (adjustable or as

required), bracings, steel/timber runners

etc. to relieve the structural member of the

rrquired load coming over it as per the

pattern given by the contractor and

approved by Engineer in charge complete.

a) Steel prop of upto 5 MT capacity and

upto 3.20 m height

77 Item No- 77 Providing and fixing safety 10.00 Smt 215.08

Overlay net having cord and boarder rope

diameter 12mm ,mesh rope dia 4 mm &

mesh size 100 mm x 100 mm and overlay

net 25 mm x 25 mm of size 10 metre x

metre and weight 9.00 kg to protect and

arrest of personal and also to safe guard

workmen working below safety net by

preventing fall of concrete, debries, small

tools.Fixing of net to be done by providing

75 mm dia M.S. pipes and clamping with

RCC as per approved fire and safety

norms etc.all complete as per direction of

Engineer-in-charge.

78 Item No- 78 Preparing estimate for 1.00 No. 7575.00

repairing of the existing building as per

instruction of Engineer in-charge (with all

necessary ancillary work) including

scrutinizing the estimate as per instruction

of sanctioning authority with all required

necessary drawings photograph and other

details like required RA and Quotation etc.

(submitting all details in soft copy in

CD/Pen Drive and hard copy) for and get

technical Sanction.

Estimate cost up to

79 Item No- 79Preparing estimate for 1.00 No. 12600.00

repairing of the existing building as per

instruction of Engineer in-charge (with all

necessary ancillary work) including

scrutinizing the estimate as per instruction

of sanctioning authority with all required

necessary drawings photograph and other

details like required RA and Quotation etc.

(submitting all details in soft copy in

CD/Pen Drive and hard copy) for and get

technical Sanction.Estimate cost

80 Item No- 80 Preparing estimate for 1.00 No. 10100.00

construction of new building (with all

necessary ancillary work) including

scrutinizing the estimate as per instruction

of sanctioning authority with all required

necessary drawings and other details like

required RA and Quotation etc.

(submitting all details in soft copy in

CD/Pen Drive and hard copy)including

getting technical Sanction.

Estimated cost up to Rs.10 Lacs

81 Item No- 81 Preparing estimate for 1.00 No. 1001.92

construction of new building (with all

necessary ancillary work) including

scrutinizing the estimate as per instruction

of sanctioning authority with all required

necessary drawings and other details like

required RA and Quotation etc.

(submitting all details in soft copy in

CD/Pen Drive and hard copy)including

getting technical Sanction.Estimated cost

Rs.Above 10.00 Lacs to 1 crore

82 Item no- 82 Approved make ceiling fan 5.00 No 1717.00

with condenser A.C. 230 V50 Cys.1200

mm. sweep complete canopy and 30 Cms.

down rod resistance type regulator erected

on existing hook or clamp with 24/0.2 flat

3 core flexiblewire with earthing fan

approved by Engineer in charge.

83 Item No- 83 Providing and fixing 22 watt 5.00 No 1515.00

Ceiling LED lights of make like Syska,

Orient or equivalent make as approved by

84 Item No- 84 Providing and fixing Carpet 10.00 Sft 50.50

lawn for gardening above the prepared

surface as approved by EIC

85 Item no- 85 Point wiring for Light / Bell 2.00 Point 467.63

with 2-1.5 sq.mm & earthwire of

sq.mm (Green) both are of ISI marked

KV grade FRLS PVC insulated

multistrand copper wires, in following

type of pipe to be erected concealed in/ on

surface on wall/ceiling complete with 6A

Modular type switch / bell push &

accessories and earth continuity of

following type, erected on PVC / Metallic

box, single mounting base frame covered

with textured/metallic front plate modules

erected on / in wall / ceiling as per pipe

erected, with necessary Lamp

holder/ceiling rose / H.D.Connector as

directed. CAT- III

86 Item no- 86 Point wiring for FAN with 2- 2.00 Point 669.63

1.5 sq.mm & earth wire of 1.5 sq.mm

(Green) both are of .ISI marked 1.1 KV

Grade FRLS PVC insulated multi strand

copper wires up to 10 mtr length, in below

type of pipe erected with 6A Modular

type switch and hum free EME step type

electronic fan regulator mounted and

accessories with earth continuity of

following type erected on PVC /

Metallic/Wooden box, single mounting

base frame covered with

textured/metallic/white front plate

modules erected on / in wall / ceiling as per

pipe erected. with necessary ceiling rose /

H.D.Connector as directed. Ct III

Rs. Twenty Lacs Thirty Three thousand eight Hudnred Fifty Seven & Paisa Twenty Five Only

I/We am / are wolling to carry out the work at

................................................................................................. % above/ below percent (Should be

wrriten in figures and words) of the estimated rate mentioned above. Amount of my/ our tender works

out as under.

*Estimated Amount *Estimated Amount

Put to tender Rs. ............................................ Put to tender Rs. ..............................................

Add......% above Rs. .......................................... Deduct .........% below Rs.

Total Rs. .......................................... Net. Rs. ...........................................

In Words ........................................................... In Words .................................................................

(* Please strike out whichever is not applicable.)

Notes 1 - All work shall be carried out as per Public Works Department Handbook and other

specifications of Division or as directed.

GM\W v! ov AW]\ H SFD AF\WSFD lJEFUGL 5]l:TSF VG[ l0lJhGGL ALHL BF; lJUT D]HA VYJF ;}RGF 5|DF6[ SZL VF5JFG]\ ZC[X[P

Notes 2 - All the columns is Schedule should be filled in ink and the total of the entries in the last

column should be struck by the contractor under his signature.

GM\W vZ ov VG];}lRDF\ AWF BFGFGL lJUTM ;CLYL EZJL VG[ K[<,F BFGFGL GM\WMGM ;ZJF/M SZL SMg8=FS8Z[ 5MTFGL ;CL SZJL

Deputy Executive Engineer Executive Engineer

R & B Panchayat Sub Division R & B Panchayat Divisions

Ahmedabad Ahmedabad