Construction of road to market complex and colony aproach, drain with renovation to road at Naradpur R and R Colony for the DPs of village Remenshapur (ka) of KIP

Earth work in excavation of foundation in hard soil or gravelly soil with all leads & lifts with shoring and shuttering with working pump if required etc. complete as per the direction of the Engineer-in-charge.

Supplying and filling in foundation and plinth with sand including watering ramming cost, conveyance, royality of all materials and cost of labour with T& P required for the work etc. complete (measurement will be taken in finished compacted section only) and as directed by the Engineer-in-charge.

Cement concrete ( 1:3:6) in foundation and floors (i.e below the base course of terrace flooring) using 4 cm size black hard crusher broken granite stone metal (free from weathered skinned & debris etc.) of approved quality and from approved quarry including lowering laying ramming concrete watering and curing etc. complete to required levels including cost and conveyance royalty of all materials and cost of all labour with T& P required for the work complete and as directed by the Engineer-in-charge .

C.C/RCC (M-25) with 20 mm.size and down graded hard granite crusher broken chips for C.C./RCC works including hoisting and laying including cost of all materials labour charges excluding the cost of steel etc.complete and as directed by the Engineer-in-charge .

Providing formwork for concrete with F1 finish for all permanently exposed surfaces not prominently exposed to public view such as in galleries, adits, bridges, retaining walls, open spillways etc. with steel shutters or plywood shutters including supply of rigid tie and supports with all labour, materials and T & P complete including finishing complete as directed by the Engineer-in charge.

Cutting , straightening, coiled or bent up M.S Rod or Tor steel bending, binding welding and joinging if necessary and tying the grills and placing in position as required for RCC work hoisting lowering and including cost, conveyance of M.S rods or tor steel and binding wire of 18 to 20 gause required for the work for bending, binding and tying the grills (payment will be made on weight of M.S Rod or Tor steel only and no separate payment will be made towards the weight of binding wire) etc. complete as directed by the Engineer-in-charge .