Vadnagar Cattle Shed under SJMMSVY (3rd Invitation) : Vadnagar Cattle Shed under SJMMSVY: “Design, Development and construction of Cattle Shade with Electrification, Framed Shed, Water Supply, Compound & Retaining wall, RCC Road, Office other Buildings, Sign Board, Sound and CCTV System, Incinerator for animals and various Artefacts etc. Including 03-[Three] Years Defect Liability Period for Vadnagar Nagarpalika, Tal: - Vadnagar, Dist.: Mehsana, Gujarat” Under SJMMSVY on EPC Basis

1 Schedule B-1 Construction of RCC Road

Earthwork, Brickbat Chara filling at open area and Paver

3 Schedule B-3 Construction of Compound Wall

4 Schedule B-4 Construction of Retaining Wall

5 Schedule B-5 Entry Gate Including Sign Board

6 Schedule B-6 Security Room and Control Panel Room

7 Schedule B-7 SLTC of Solar Street Light Work & High Mast Work

8 Schedule B-8 Percolating Well

9 Schedule B-9 Development of Garden and Plantation

10 Schedule B-10 Veterinary Hospital

11 Schedule B-11 Office Building

12 Schedule B-12 Milk Processing Unit

13 Schedule B-13 Soakpit & Septic Tank

14 Schedule B-14 Tube Well of 250 mm Dia. Depth 300 Rmt

15 Schedule B-15 Furniture arrangement at different Building

16 Schedule B-16 Electrical and Instrumentation Work

17 Schedule B-17 Construction of Various Shed

18 Schedule B-18 Cow Urine Collection

19 Schedule B-19 Water Distribution Network & Connection at Each Pit

21 Schedule B-20 SITC of Sound System

22 Schedule B-21 SITC of CCTV Camera System

Provision of Sculpture, Statue, Benches & Various artifects

23 Schedule B-22

Design, supply, install and commission a 1 Ton Double

24 Schedule B-23 Chamber Animal Incinerator System with pollution control

and CPCB compliance on turnkey basis.

Total Net Cost (In Rs.)

Construction of RCC Road

Description Unit Quantity Rate Amount

Clearing and grubbing road land including uprooting rank vegetation grass

bushes,shrubs,sapling and trees girth upto 300 mm removal of stumps of

trees cut earlier and disposal of unserviceable materials (A) By manual

means in area of light jungle

Box cutting the road surface to proper slope and camber for making a base

2 for road work including removing the excavated stuff and depositing on the cum 2608.88 109.05

road side slope as directed upto 50Mt.lead.

Supplying of graded stone aggregate of following sizes (for W.B.M. Road)

(2) Hand broken stone aggregate 40 mm to 63 mm size.

Spreading the stone aggregate for rolling and W.B.M. including filling the

4 interstices to required camber and gradient (excluding spreading of cum 1159.50 261.94

Blindage) (ii) 40mm to 63mm size aggreagates (H.B.)

Rolling and consolidating water bound macadam (W.B.M) (except laterite

and Kankar) including watering with required thickness (Main layer

5 including binding materials) including filling in depressions which occur sqm 1159.5 22.02

during the process. (A) With power roller exceeding 8 tonne and not

exceeding 12 tonne.

Providing and laying cement concrete 1:3:6 (1‐Cement : 3‐ coarse sand : 6‐

6 hand broken stone aggregates 40 mm nominal size) and curing complete cum 579.75 2,968.91

excluding cost of formwork in (A) Foundation and Plinth (upto 10 ton)

Providing and laying controlled cement concrete M.200 and curing

complete excluding the cost of formwork and reinforcement for reinforced

concrete work (A) Foundations, footings, Base of columns and Mass

Providing TMT Bar FE 500D reinforcement for R.C.C. work including

bending, binding and placing in position complete.

Total cost (in Rs.)

Earthwork, Brickbat Chara filling at open area and Paver Blocks at Road

Description Unit Quantity Rate Amount

Earthwork for embankment including breaking clods, dressing with

all lead and lift and including watering rolling and consolidation of

1 subgrade in layers at O.M.C. to required dry density including Cumt. 14420.00 201.81

filling the depression which occur during the process using power roller

8T to 10T. (E) From Borrow area within 6 km lead

Excavation for foundation upto 1.5 m depth including sortingout

2 and stacking of useful materials and disposing off theexcavated stuff Cumt. 151.00 268.21

upto 50 meter lead (C) Hard Murrum

Add extra for Disposing off the excavated stuff of above items for lead of

Add extra for Disposing off the excavated stuff of above items for lead of

Add extra for Disposing off the excavated stuff of above items for lead of

Filling in foundation and plinth with brick Bats Chhara in layers of

3 20cm. thickness including watering, remming and consolidating etc. Cumt. 336.00 621.46

Lime Mortar 1:1 (1-lime putty / Equivalent dry Hydrated Lime : 1-Fine

Providing and fixing pre-cast Rubber Dye / steel Dye inter locking concrete

block 60mm thick with grade of concrete M300 pnumatic compressed /

vibrated mechanically and as per approved design Confirming to IS

15658 : 2006 including 35 mm Sand layer for levelling and filling the joint

with sand in proper line and level as per guidlines of IRC : SP 63-2018 etc.

Providing and fixing pre-cast concrete kerb stone of gray cement

based concrete block 30cm length,30cm height and 15cm thick of

6 M300 grade concret as per approved design and including excavation Rmt 510 404.05

for fixing in proper line and level,filling the joint with C:M 1:3

(1cement:3fine sand) etc complete.

Providing & laying spreading and compacting 200mm thick WBM Grade -

I of B.T.M.C. metal 45mm to 90mm size including using 29% (22+7%)

filler i.e. stone screeing 13.2 mm at the rate 0.27 Cumt. & stone dust

at the rate 0.08 cumt. including spreading in uniform thickness,

hand packing, rolling with vibratory roller 8-10 tonnes in stages to

proper grade and camber, applying and brooming type of

screning/binding materials to fill up the interstices of coarse

aggregate, watering and compacting to the required density.

Total cost (in Rs.)

Construction of Compound Wall

Description Unit Quantity Rate Amount

Excavation for foundation including all safety provision using site rails and

1 stacking excavated stuff up to a lead of 90 mtr. Cleaning the site etc. cum 367.24 102.35

Completed. In all sorts of soil and soft murrum

Add extra for Disposing off the excavated stuff of above items for lead of

Add extra for Disposing off the excavated stuff of above items for lead of

Add extra for Disposing off the excavated stuff of above items for lead of

Providing and laying cement concrete 1:3:6 (1 Cement : 3 Coarse sand :

2 Hand Broken stone aggregates 40 mm nominal size) and curing complete cum 84.93 2,968.91

excluding cost of formwork in Foundation and Plinth

Providing and laying controlled cement concrete M.200 and curing

3 complete including the cost of formwork and including the cost of cum 56.00 4,337.95

reinforcement for reinforced concrete work in (A) Foundation & Footing

Providing and laying controlled cement concrete M.200 and curing

complete including the cost of formwork and including the cost of

reinforcement for reinforced concrete work in (D) Columns, Pillars posts

and struts upto floor two level

Providing and laying controlled cement concrete M.200 and curing

complete including the cost of formwork and including the cost of

5 reinforcement for reinforced concrete work in (C) cum 64.84 6,614.49

Slabs,landing,shelves,Balconies Lintels, Beams, Girders and Cantilever upto

floor two level.

Providing and laying controlled cement concrete M.200 and curing

6 complete including the cost of formwork and including the cost of cum 21.62 6,614.49

reinforcement for reinforced concrete work for Coping at Top of Wall

Providing TMT Bar FE 500D reinforcement for R.C.C. work including

bending, binding and placing in position complete.

Brick work using common burnt clay building bricks having crushing

strength not less than 35 kg./Sq.Cm. in foundation and plinth in Cement

Mortar 1:6 (1‐Cement : 6‐fine sand) and conventional extra for brickwork

in superstructure above floor to level

20 mm thick sand faced cement plaster on walls upto height 1.5 metres

above ground level consisting of 12 mm thick backing coat of C.M. 1:3 (1

cement : 3 sand ) and 8 mm thick finishing coat of C.M. 1:1 (1Cement :

Sand ) etc. complete.

Refilling including ramming, watering, consolidating disposal of surplus

stuff as directed within a radius of 3 kms

Finishing wall with water proofing cement paint of on wall surfaces (Two

coats) to give an approved brand and manufacture and of required shape

11 even shade after thoroughly brushing the surface to remove all dirt and Sqm 4065.00 71.86

remains of loose powered materials and extra for every subsequent coat

of finishing with cement paint on ceiling and sloping roofs.

Description Unit Quantity Rate Amount

Providing and Fixing 'Y' Shaped Barbed wire fencing on compound wall top

with verical angle of 50x50x6 mm x 0.60 Mtr height, two cross angles

50x50x6 mm x 0.45 Mtr. Length, having 2 Horizontal and 2 diagonal rows

of barbed wire(9.38 kg/100 rmt) on two cross angle incl. cost of barbed

wires, necessary GI stapplings, fixing in Coping on top of compound wall,

painting angles with one coat of anticorrossive primer and two coats of

enamel paint of approved quality, necessary scaffolding etc. complete as

per the direction of the Engineer in Charge.

Providing and fixing 1 mm thick M.S. sheet sliding shutters with frame and

diagonal braces of 40 x 40 x 6 mm angle iron, 3.15 mm M.S. gusset plate at

junctions and corners 25 mm dia pully 40 x 40 x 6 mm angle and T‐iron

guide rail at top and bottom respectively with handles, stoppers and

locking arrangement etc. including applying a priming coat of red lead

Painting two coats (excluding priming coat) on new steel and other metal

surface with synthatic enamel paint, brushing to give an even

shade,including cleaning the surface of all dirt, dust and other foreign

Total cost (in Rs.)

Construction of Retaining Wall

Description Unit Quantity Rate Amount

Excavation for foundation upto 1.5 m depth including sorting

1 out and stacking of useful materials and disposing off the cumt 288.00 432.08

excavated stuff upto 50 Meter lead.g (C) Hard Murrum

(i) Uncoursed Rubble Masonry with hard stone of approved quality in

2 foundations and plinth in Cement Mortar 1:6 (1- cement : 6-coarse cumt 20.16 2,523.34

sand including levelling up etc. complete

Providing & casting in situ ordinary cement concrete M-100 mix and

providing necessary pin headers including shuttering, scaffolding, laying,

vibrating, curing and finishing complete with V-Groves.(A) Height from

Providing and laying controlled cement concrete M.250 andcuring

complete excluding the cost of formwork andreinforcement for

reinforced concrete work in (A) Foundations,footings, Base of columns

and Mass concrete.

Providing and laying controlled cement concrete M.250 and curing

complete excluding the cost of formwork and reinforcement for

reinforced concrete work in (B) Walls, from top of foundation level upto

floor two level.

Providing TMT Bar FE 500D reinforcement for R.C.C. work including

6 bending, binding and placing in position complete Kg 35424.00 77.29

upto floor two level

Providing fusion bonded Epoxy coating not less than 175 micron

thickness and up to 300 micron to reinforcement bars as per IS-13620-

1993/ASTM-775 M including testing of coating at plant and all taxes

(A) 10mm to 16mm dia bar

Filling available excavated earth (excluding rock) intrenches. plinth,

sides of foundations etc. in layers notexceeding 20 cm. in depth

consolidating each dispositedlayer by ramming and

Providing formwork of ordinary timber planking so as to give arough finish

including centering shuttering strutting and proppingetc. Height of

propping and centering below supporting floor to

9 ceiling not exceeding 4 M. and removal of the same for in Sqmt 192.00 181.85

situreinforced concrete and plain concrete work in. (A)

Foundations Footings Bases of Columns etc. and Mass

Providing formwork of ordinary timber planking so as to give arough finish

including centering shuttering strutting and proppingetc. height of

propping and centering below supporting floor to ceiling not

10 exceeding 4 M. and removal of the same for in situreinforced concrete Sqmt 960.00 258.28

and plain concrete work in. (C) Verticalsurface such as walls (any

thickness) partitions and the likeincluding attached buttresses & string

course & the like

Total cost (in Rs.)

Entry Gate Including Sign Board

Description Unit Quantity Rate Amount

Providing & fixing M.S. grills of required pattern to wooden frames

of windows etc. with M.S. flats at required spacing and frame all-

round square or round bars with round headed bolts and nuts or by

screws. (B) ORNAMENTAL GRILL

Applying priming coat of over new steel and other metal surface after and

including preparing the surface by thoroughly cleaning, oil grease, dirt

2 and other foreign mater and scoured with brushes fine steel wool, Sqmt 47.50 36.87

scrapers and sand paper with ready mixed priming paint brushing red

Painting two coats (excluding priming coat) on new steel and other metal

surface with enamel paint, brusing interior to give an even

shade including cleaning the surface an even shade including cleaning

the surface of all dirt, dust and other foreign matter.

Providing & Fixing Sign Board Made out of 50-75 mm thick Real Wood

Including Cost of Hand/ cnc Carving Letter As per Instruction Given

4 By Nagar Palika. The Item Include Cost of Alll Kind Of Material Nos 2.00 62,500.00

Polishing Work Weather Proof Treatment Hanging Fixures Etc All The

Size Of Board Should Be 600 x 1200 mm

Supplying and erecting LED street light / Flood light fittings with High

power White LEDs wattage of 3 Watt and above assembled on single

MCPCB, efficiency more than 130 lm/w and corrosion free High pressure

die cast aluminium housing with smooth finish powder coated and

heat sink extruded aluminium with diffuser and Polycarbonate optics/

lenses with company mark/name engraved or embossed 160 to

V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K to

5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt . LED

driver efficiency > 85 %.( fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown ranges of Wattage

capacity of LED fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.) Cat III - Above 24 To 36 Watts

Excavation for foundation upto 1.5 mt. Depth including sorting out and

6 stacking of useful materials and disposing of the excavated stuff upto 50 Cum 3.18 157.08

meter lead. (B) Dense or Hard Soil (For Footing)

7 (C) Hard murrum Cum 3.18 268.21

Providing and laying cement concrete 1:3:6 (1-Cement : 3- Coarse sand : 6 -

8 Hand broken stone aggregates 40 mm nominal size) and curing complete. Cum 0.58 2,968.91

Excluding cost of form work in Foundation and plinth.

Providing TMT Bar FE 500D reinforcement for R.C.C. work including

bending, binding and placing in position complete upto floor two level

Description Unit Quantity Rate Amount

Providing and laying cement concrete work 1:2:4 (1 : cement, 2:coarse

sand, 4: graded stone aggregates 20 mm nominal size) and curing

10 complete excluding cost of form work and reinforcement for reinforced Cum 1.09 3,875.94

concrete work in

(A) Foundation, footing, base of columns and mass concrete.

11 (D) Columns,pillars,posts and struts up to floor two levels Cum 2.30 3,971.75

Providing formwork of ordinary timber planking so as to give a rough

finish including centering,shuttering, strutting and proping etc. height of

proping and centering below supporting floor to ceiling not exceeding

mt. And removal of the same for in situ reinforced concrete and plain

concrete work in

(A) Foundation, footing, base of columns and mass concrete.

(G) columns, pillars, posts and struts (square, rectangular, polygonal in

Providing 15 mm thick cement plaster in single coat on brick / concrete

14 walls for interior plastering upto floor two level and finished even and Sqmt 11.22 165.31

smooth in Cement mortar 1 : 4 (1: Cement, 4: Sand)

finishing wall with water proofing cement paint of on wall surfaces(Two

coats) to give an approved brand and manufacture and of required shape

even shade after thoroughly brushing the surface to remove all dirt and

remains of loose powered materials.

Total cost (in Rs.) =

Security Room and Control Panel Room

Description Unit Quantity Rate Amount

Security & Panel Room:

Designing (aesthetically) and constructing R.C.C frame structure of Without

Gantry structure (Upto 3.60 M)

1 1. Minimum 15 % opening for ventilation should be provided. Sq.mt 12.25 11,920.53

2. Pump room rolling shutter, door and windows of aluminium section

and window grill of iron should be provided (Included in Cost).

3. Plinth level of Pump house should be min.1 meter above GL.

4.Cost does not include foundation for pumping machinery.

Total cost (in Rs.) =

SLTC of Solar Street Light Work & High Mast Work

Description Unit Qty Rate Amount

Supplying and erecting approved make Octagonal pole made from HR sheet steel. The pole

should be made as per IS. and shall be coated with hot dip galvanizing as per IS

2629/2633/4759, suitable suspend local wind speed with integral Junction box consist of

terminal plate of min 12mm Hylam sheet, standard profile 35mmX7.5mm Din-Rail for MCB

Mounting, stud type terminal and arrangement for cable termination to be erected on suitable

foundation as per detils given by manufacturer considering site requirment. (E) 7 Mtr. Long

mm Top X 135 mm bottom dia, 3 mm thickness with 225mmX225mmX16mm base plate, 4-M20

Bolts and 600mm long with necessary G.I. J Bolts .Approx Pole weight 67 kg

Providing & Fixing of Solderless Crimping Type Aluminium Lugs (4 Nos. per termination)

conforming to IS suitable for 1 x 4.0 Core x 16 Sq. MM PVC Insulated Aluminium Armoured cable

evenly crimped with high pressure tool & connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved manner. - (8 Nos. per St. Light Pole)

Providing & erecting 240 V MCB double pole switch for lighting Load (B Curve) having 10 KA

3 breaking capacity & confirms to IS : 8828 in existing box having following capacity.(A) 6 to 32 Each 60.00 268.13

Amp. Cat.III - (1 No. Per St. Lght Pole)

Providing and erecting Pipe type earthing having 150cms. long and 2.5cms dia. galvanised iron

pipe with coupling and buch buried in specially prepared earth pit complete with necessary

4 SWG earth wire. required size HOT deep Galvanised iron strip for earthing of H.T., OCB/ACB/ Job 60.00 613.02

Transformer LT panel board, Motors etc. using proper clamp. For using salt and charcoal / coke

as required for pipe type earthing.

Providing and erecting Street Light pole bracket comprising main B Class GI pipe of

cm/require outside dia. complete with suitable B Class G.I. sleeve tubing of approx.

45cms.length and suitable for 76.5 mm /80mm / required size of pole top having sufficient

5 fasteners for fixing the brackets and having spread of 1.5.mtr. length with 110 deg.with vertical Each 60.00 677.43

plane & suitable welded stays, reducer and with check nuts complete painted with one coat of

Red oxide / PU base primer and two coats of Aluminium / PU paint. paint with following nos of

arms. [A] Single Arm Bracket 1.5 Mtr (1 No. Per St. Light Pole)

Supplying and erecting LED Solar street lights with High power White LEDs wattage of 1Watt

and above assembled on single MCPCB, efficiency more than 130 lm/w and corrosion free High

pressure die cast aluminum housing with smooth finish powder coated and heat sink extruded

6 aluminium with diffuser and Polycarbonate optics/ lenses with company mark/name engraved Each 60.00 35,797.00

or embossed with 36 hours battery backup & MPPT 24V,7.5 A charge controller with 12 hours

automatic switch on/off with wind speed resistance 44 m/s as per IEC

E) 36W,3000 lumens, IP-65, PV Module – 2x100W and 6 mtr poles complete erected

Supplying and erecting Flexible FR PVC insulated multi strand multi core 1.1 kV grade ISI Marked

7 Copper wires of 2.5 Sq. MM.,3 core round PVC sheathed in exising pipe/ in street light pole Mtr 660.00 73.02

erected with green colour for earth continuity.

Providing & erecting of 1 x 4.0 Core x 16 Sq. MM, XLPE (IS: 7098 (i) - 88), ISI Mark, Armoured

cable, Multistranded Aluminium Conductor suitable for 1.1 kV grade to be laid on wall with

necessary clamps or to be laid 90 Cms underground in existing cable trench/ pipe at road

crossing or on floor and making the ground as per original. - For Streetlight between two poles &

Service Connections.(Considering 25 Mtr. Distance between two poles and extra cable for loop =

Providing & laying of approved make 50 MM outer dia Doubled Walled Corrugated Pipes (DWC)

of polyethylene (conforming to IS 14930 - II) with necessary connecting accessories like coupler,

Tee, L - Bow, etc. of same material at required depth (90 cms) for laying of cable below ground/

road surface for enclosing cable and back filling the same to make ground as per original & as

per instruction of Engineer Incharge - for Streelight Cable of 1 x 4 core x 16 Sq. MM. (30 Mtr Per

Between two Pole)

Description Unit Qty Rate Amount

Providing & laying of approved make 90 MM outer dia Doubled Walled Corrugated Pipes (DWC)

of polyethylene (conforming to IS 14930 - II) with necessary connecting accessories like coupler,

Tee, L - Bow, etc. of same material at required depth (90 cms) including excavation for laying of

cable below ground/ road surface for enclosing cable and back filling the same to make ground

as per original & as per instruction of Engineer Incharge - for Streelight Cable of 1 x 4 core x

Drilling the road without breaking the road surface (Asphalt) for laying of cable for feeding

power supply by making up to 100mm dia.size of holes at both ends complete.

Making trench in soft soil of suitable width of 90 cm deep for laying cable or locating the fault

all over the run and back filling the same and making the surface as normal ground.

Painting the number and words for inventory Identification on erected fittings / equipment’s or

13 Such accessories as may required with good quality of enamelled paint as directed by engineer Each 60.00 22.09

in charge(i) up to 20 characters, up to 50 mm height.

Providing and erecting Three Phase IoT GSM/GPRS Central Control & Monitoring System (CCMS)

Panel for Streetlights Smart Feeder Panel with 3 Phase GSM/GPRS CCMS Streetlight Controller

with LCD Display (1 Nos.). Streetlight Controller with Individual each Phase Control (Energy

Saving feature) and Spare relay facility. Streetlight Controller having 10 years of reserved

battery for RTC. With 50 programmable schedule, month-wise offset settable facility,

Astronomic sunrise/sunset time programming in-built for year long schedule. Operating Voltage

@ 440 V AC with Over Voltage & Short Circuit protection. 2 hour Battery Back-up for Streetlight

Controller. Panel to have 1 Nos. of 3 Phase – Class 1 Energy Meter for Energy & Fault monitoring

on CCMS Web Dashboard. Panel consisting of 3 Nos. of 3 Pole Contactors (3 x 18 A), 7 Nos. of

Pole Miniature Circuit Breakers (32 Amp.) for Bypass, Input / Output supply functionalities,

Nos. of 4 Pole Earth leakage circuit breaker for safety protection. Standard lock & key facility for

Panel security.

Door Switch for unauthorized access & tamper detection. Accelerometer for panel movement

detection & tamper alerts. Suitable amount of Wires, Connectors, Terminal Blocks included in

Panel. 16/18 gauge M S with industrial exterior powder coated PP with seven tank process RAL

7035 All weather-proof Enclosure Panel having IP65 rating. Waterproof Glands & Grounding

Stand included. Dedicated IoT communication GSM/GPRS SIM Card (with minimum 5 years of

recharge) for Wireless Communication with CCMS Web Dashboard. 5 Years Data Hosting &

Server Charges to be included with CCMS Web Dashboard. Load status, Live analytics, Energy

Meter monitoring (Parameters such as kW, kWH, PF, I, V), comparative analytics, reports

generation facility. Fault detection on web dashboard. GIS Mapping of CCMS Panel on Web

Dashboard. Secured MQTT Communication for Cloud. Includes Android & iOS Mobile

Application. Local communication facility via Mobile Application in case of GPRS connectivity

Providing & erecting Approved make Four pole moulded case circuit breaker having breaking

capacity ICU of 25 KA. at 415 V,having normal current rating up to 25 A to 100A. with Fixed

15 thermal & magnetic release suitable to work on A.C. supply 50 c/s. with all internal connections Each 1.00 6,113.28

& complete erected in existing 16 G.M.S. housing. (Cat - III) suitable to work on AC supply with

all internal connection-ICS=100% of ICU only.(1 No. per Distribution Box)

Providing & Fixing of Heavy Duty Flange type Double Compression brass double Compression

type Cable Gland with rubber ring suitable for 1 x 4.0 Core x 16 Sq. MM PVC Insulated Alu.

Armoured cable complete with outgoing tails, insulating taps etc. - (3 Nos. Glands per

distribution box).

Providing & Fixing of Solderless Crimping Type Aluminium Lugs (4 Nos. per termination)

conforming to IS suitable for 1 x 4.0 Core x 16/25 Sq. MM PVC Insulated Aluminium Armoured

cable evenly crimped with high pressure tool & connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved manner. (12 Nos. Lugs per Distribution Box).

Description Unit Qty Rate Amount

Supplying & erecting in earthpit of minimum bore dia. 150mm size approved make Earthing

Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of corrosion free hot

dipped G.I.Pipes having Outer pipe dia of 50 mm having 80-200 Micron galvanising, Inner pipe

dia of 25 mm having 200-250 Micron galvanising, connection terminal dia of 12 mm with

constant ohmic value surrounded by highly conductive compound with high charge dissipation

suitable for following type of applications with chamber and heavy duty cover.(approved make

OEM has to submit test certificate including value of earth resistane of installation.) & having

18 back filling compound of (B) Inner Chemical (CCm Compound) - Resistivity :- 0.2 Ohm/meter Each 1.00 8,556.73

testing as per IEC 62561-2017 , Voltage Drop :- < 1 volt at no load & dry form , Sulpher content :-

<2% .(C) Back filling copound :- Earthing compound should be capable to retain moisture for log

time. Necessary test report must be submitted.

(C) For Electrical Installation covering Transformer Neutrals, Lightning arrester Earthing,

A.C.Plant & Sensitive Computer System (like Automation, SCADA) i.e. independent Earthing

located in other than normal soil i.e. Soft Rock, Marshy Soil etc..-Length of Pipe : 3 Mtrs. -Back

filling Compound :2 nos Bags of 25 Kg.- (1 Job per Distribution Box)

SITC of 16 Mtr. - M.S. polygonal High Mast with following accessories.( Item no. a to g)

Supplying, erecting, testing, commissioning approved make M.S. Polygonal High Mast Pole

having following general Specification.

(a) Polygonal Section fabricated from M.S. Plate confirms BSEN 10025 & Hot deep galvanized

minimum 65/86 micron (as per IS 2629 /1985) Lantern carriage with ring and rubber lines for

erection of luminaries of suitable site.

(b) Maximum telescopic section not more than four

(c) Double drum gear pipe motorized winch with 6mm dia S.S. Rod (For 16 mtr and above size)

(d) Approved make L.E.D. aviation light = 1 No. Lightening arrestor = 1 No. with necessary wiring

of 2.5 sq.mm 5 core ISI copper cable Unarmoured.

19 (e) Bottom most section suitable for mounting reversible motor and switchgears having door Each 1.00 1,71,574.17

not more than 1400mm x 300mm with waterproof gasket & hinges & locking arrangement.

(f) Pole structure comprises suitable size of reversible motor, cable and necessary switchgears

with control panel.

(g) bottom section shall have suitable size of thickness supports ribs foundation bolts nuts etc.

(h) Item not comprises the cost of lanterns.

(i) Necessary Cement Concrete foundation as per IS including testing & commissioning of the

entire structure for following size of High Mast poles

[3] High Mast 16 Mtr. TOP A/F 150 mm, BOTTOM A/F 450 mm, No. of Sec. No. - 2, Bottom

Thickness - 4 mm, Top Sec. 3 mm, Size of Base Plate - dia.560 mm x 20 mm thick, Foundation

Bolt Size M24 x 880 mm, Qty - 8 Nos., Suitable for mounting Fitting of Light - 8 Nos.

Supplying and Installation of Approved make Integrated LED Solar light fitting comprising in built

Poly crystalline solar panel,Lithium-ion 3.7 V battery, LED CRI Greater than 70, CCT-6500K,

lum/watt all housed in Extruded Aluminium body,with motion sensor & auto on -off device

20 erected on existing pole with following specifications. Each 8.00 9,848.85

(A) 6 watt LED light, with 7 W Solar panel, 3.7 V 13000 to 15000 mAh battery, 450 lm luminus

flux, suitable for mount on 3 mtr height pole.

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand / Solid Aluminium

conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of

following size of cables (C) 4 core 10 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated

armoured cable complete with out going tails, insulating tape etc for following size of cables. (D)

2 to 4 core 16 Sq. mm

Description Unit Qty Rate Amount

SITC of Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following

size evenly crimped with high pressure tool & connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved manner. (C) 16/25 Sq.mm.

Providing & laying approved make Double walled corrugated pipes (DWC) of

polyethylene(conforming to IS 14930 II )with necessary connecting accessories of same material

24 at required depth in existing trench for laying of cable. below ground / road surface for Mtr 750.00 62.09

enclosing cable (A)50 mm outer dia

Drilling the road without breaking the road surface (Asphalt) for laying of cable for feeding

power supply by making up to following size of holes at both ends complete. (B) Up to 150 mm

providing and erecting Approved make RCCBs conforming to IS: 12640 and having sensitivity of

30 mA and Short Circuit withstand capacity of 10 KA and suitable for operation on single phase

240 V,50Hz. having characteristic of quick action & tripping with all advance feature & do not

incorporate any electronic component. for following Max. rating erected as directed (ii)

40Amps. DP ( Cat. III)

Providing and erecting AC-3 duty 3 pole power contactor with 2 NO & 2 NC aux contacts

complete with 415V/220V operating coil suitable for (L&T, BCH,T.C., Siemens, C&S make). (B)

for 40 A rating

Providing & erecting 415V MCB Four Pole Switch for Lighting Load (B curve) having 10KA

breaking capacity & confirms to IS :8828 in existing box having following capacity (b) 40 Amp.

Supplying & erecting earth pit of minimum bore dia.150mm size approved make Earthing

Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of corrosion free hot

dipped G.I. Pipes having Outer pipe dia of 50mm having 80-200 Micron galvanising, Inner pipe

dia of 25 mm having 200-250 Micron galvanising, connection terminal dia of 12mm with

constant ohmic value surrounded by highly conductive compound with high charge dissipation

suitable for following type of applications with chamber and heavy duty cover. (A)(approved

make OEM has to submit test certificate including value of earth resistance of installation duly

stamped and signed by agency and officer In charge has to ensure the value of Earthing

resistance mentioned in test Certificate) & having back filling compound of (B) Inner chemical

(CCM Compound)- Resistivity:- 0.2 ohm / meter testing as per IEC 62561-2017, Voltage drop:- <

1 volt at no load & dry form, Sulphar content:- <2%(C) Back fill Compound :- Earthing compound

should be capable to retain moisture for long time Necessary test report must be submitted by

Agency. (a) For Electrical Installation up to 440V in normal soil Length of pipe - 1 Mtr Back filling

compound - 1 Nos Bag of 15 Kg. with Providing and erecting Pipe type Earthing with 40 mm dia

2.5 mtr long 'B' grade G.I. pipe with necessary coupling buch buried in specially prepared earth

pit & G.I. earth wire of 8 SWG erected & connected as directed (For panel) and Providing and

erecting HOT deep Galvanised iron strip wire 8 to 16 SWG.

Description Unit Qty Rate Amount

Supplying & erecting IP 55 grade following size section pillar fabricated from joint less M.S.

Sheet with angle iron legs made from joint less M.S. Angle with cable clamps to be buried in

ground to have appropriate erection to work uniform until erected with cement concrete

foundation and 45 cm high bricks work finishing with plaster etc. hinged double door internally

supported on both side, with internal and outside looking arrangement with look and keys in

duplicate 35 x 35 x 5 mm M.S. Angle of Two Nos. one is welded and other with nut and bolt for

erecting Bakelite sheet. Painting the Section Pillar inside and outside with three tank powder

coated paint. section pillar roof should be without joint with water leakage proof & tested as

per IP 55 test & followed by IS 2147 of

(B) 75 X 60 X 45 cm section pillar fabricated from 16 Gauge MS Sheet with angle iron legs 45 cm

long made from 35 X 35 X 5 mm thick MS angle.

Supplying and erecting HYLAM sheet on existing angle iron frame.for following thickness (F)

Supplying & erecting approved make Digital time switch having lithium cell 6 years operative

and operate battery backup 1 channel day clock with 14 memory programme, suitable to

operate on 240V + 5%, 16A with, floating contacts Minimum switching setup time 1 minimum &

32 LCD display. Also comprised permanent ON/OFF switching. Programming switches & housed in Ea 1.00 3,137.44

fire proof thermoplastic enclosure & transparent cover erected as required with necessary

connection erected as directed.

Making trench in Hard Murrum / Tar Road of suitable width of 90 cm or required depth for

laying any size of cable or locating the fault all over the run and back filling the same and

making the surface as normal ground..

Providing , erecting , fabricating the M.S. structure as per requirement on site incorporating

proper size of M.S. angles,square,round, flats, bars, channels, sections complete with cutting,

welding, grinding & finishing duly painted with one coat of red oxide with erection on site as per

direction of engineer in charge with necessary grouting, cementing, plastering & finishing

Total cost (in Rs.) =

Percolating Well

Description Unit Qty Rate Amount

Security & Panel Room:

(I) Providing & Installing , commissioning & Testing of One number of Horizontal Filtration Module is

Precast Modular Step well og M 25 grade, designed to capture sediments primarily from surface runoff

water. This Octagonal shape structure has a circumscribing diameter of approximately 1500mm and a

height of 3475mm. A part of the top module is usually kept above the ground however same can be

flushed with ground. 300/400/610mm are the available height options in case part of it has to be kept

above the ground level. Top module accommodates indigenously designed 4-Nos Array Filters to capture

sediment effectively within the Horizontal Filtration Module. This easily removable array filters can be

cleaned within or outside the module using pressurized water. Total filtation area of this filter is

approximately 6000 cm2. Filtration capacity is 20m3 to 30m3 per hour. These module is installed prior to

the Sand Filtration Module. The inlet and outlet of is 160mm diameter UPVC Pipes.(II) Providing &

Installing, ral ladder at 1125 mm with water cleaning system, labours, hand bucket, lari & other tools. ie.e

Trikam , Pavda, rassa, Battery, G.T. silica etc. with disposing silt as appropriate places as directed by

engineer in charge. No any additional payment shall be made for cleaning and maintenance work. All

required testing shall be carried out by bidder without any extra cost for preparing design and drawing

for above work and approval of design from competent authority of GUDC is in the scope of bidder. No

any extra payment shall be made for the same. Precase slabs held together between two horizontal

precasr slabs ( with 590,, edge length , 50mm thick and hole of 100mm diameter in the centre) Bottom

module holds another type of filter media in the form of sand bed around a continuous slot fine aperture

stainless screen ( 420 mm diameter and 300 or 450 mm length). Screen is fixed to the bottom slab and is

fully covered by filtration sand. Screen creates entry points of the filtration water. Module filtration

capacity & testing upto 20m3 to 30m3 per hour from modular systems only.

This module is used for Roof water harvesting and it is connected with the Exisiting tubewell / recharge

well / UG Storage tank.( III ) Providing and Fixing 200mm M.S. Casing Pipe ( 114 mtr. 5mm Thick) approved

make like (Tata, Jindal, Surya Or as approved by engineer incharge) with to be connected 200mm LCG V-

wire Screen (36 Mtr) with 450 mm Dia Drilling, water, mudslurry tankers, loading unloading, providing

Gravel, Clay/Sand, gravel packing, Clay/Sand Packing and Cleaning with compressor 750/200 PSI) total

depth of recharge well should be 152 mtr inclusive of mud pit and mud refilling, site cleaning etc. (IV) The

above work is including as per approved drawing and required to completed the work, (i) Excavation for

foundation with refilling upto required depth including sorting out and stacking of useful materials and

disposing off the excavated stuff with all lead and lift in any kind of soil, (ii) Providing and Laying on

concrete 1:2:4 (1 Cement : 2- course sand : 4 graded stone aggregate 20mm nominal size ) and curring

complete including cost of form work and rainforcement etc complete ( iii) Brick work using common

burnt clay building bricks having crushing strength not less than 35 kg/Sq.Cm in foundation and plinth in

Cement Mortar 1:6 (1- Cement : 6- Finesand) (B) Conventional with 15mm. thick in Cement Plaster 1:3 ( 1-

Cement : 3- Finesnad) n single coat on rough (similar) side of single or half brick walls. (iv) Providing and

fixing 150MM Dia (S.S.304) 600MM Length Leaf Trap (6mm Slot) (v) Job work for cleaning of modules for

every pre monsoon for total 5 year (once in a Year) with in built intergral ladder at 1125mm with water

cleaning sysyem, labours , hand bucket, lari* other tools.ie.Trikam, Pavda, Rassa, Battery , G.T. Salia etc.

with disposing slit as appropriate places as directed by Engineer in Charge. No Any Additonal Payment

shall be made for cleaning and maintenance work. All reuqired testing shall be carried out by bidder

without any extra cost for preparing design and drawing for above wprk and approval of the design from

compentent authority of GUDC is in the scope of bidder. No any extra payment shall be made for the

Total cost (in Rs.) =

Development of Garden and Plantation

Description Unit Quantity Rate Amount

Supplying and stacking of well decayed cattle manure at site including

royalty and carriage upto 5 k.m.lead complete.

2 Rough dressing the trenched ground including breaking clods. Sqmt 14840.00 1.50

3 Fine dressing of the ground. Sqmt 14840.00 3.70

Spreading and Mixing earth and sludge or manure and/or good earth in

4 required thickness as per direction of officer-in-charge (cost of sludge, Cumt 5194.00 52.35

dump manure and/ or good earth to be paid separately).

Grassing with selection No. 1 Doob grass including watering and

maintenance of the lawn for 30 days or more till the grass forms a thick

lawn, free from weeds and fit for mowing including supplying good earth,

if needed (the grass and good earth shall be paid for separately).

Supplying & Stacking of Selection No.1 doob grass turf at site fresh & free

6 from weeds having proper roots in green including loading, unloading, Sqmt 14300.00 50.80

carriage and all taxes paid etc.and as per direction of officer in charge.

Preparation of beds for hedging and shrubbery by excavating 60 cm deep

and trenching the excavated base to a further depth of 30 cm, refilling the

excavated earth after breaking clods and mixing with sludge or manure in

the ratio of 8:1 (8 parts of stacked volume of earth after reduction by 20%:

one part of stacked volume of sludge or manure after reduction by 8%),

flooding with water, filling with earth if necessary, watering and finally fine

dressing, leveling etc. including stacking and disposal of materials declared

unserviceable and surplus earth by spreading and leveling as directed,

within a lead of 50 m, lift up to 1.5 m complete (cost of sludge, manure or

extra earth to be paid for separately)

Digging holes in ordinary soil and refilling the same with the excavated

earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of

stacked volume of earth after reduction by 20% : 1 part of stacked volume

8 of manure after reduction by 8%) flooding with water, dressing including Each 1376.67 18.70

removal of rubbish and surplus earth, if any, with all leads and lifts (cost of

manure, sludge or extra good earth if needed to be paid for separately)

Holes 45 cm dia, and 45 cm deep

Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of

9 unserveiceable material’s as per direction of officer in charge (excluding Each 960.00 7.30

cast of plant & water)

Providing and stacking of Azadirachta indica ( Neem ) of height 120-130cm

10 in big polybag of size 25 cm as per direction of the officer-in-charge. Each 60.00 65.00

Providing and stacking of Ficus bengalensis (Bargad) of height 120-135 cm.

11 in big poly bags of size 25 cm as per direction of the officer-in-charge. Each 60.00 65.00

(Wad Banyan, Ficus benghalensis )

Description Unit Quantity Rate Amount

Providing and stacking of Plumeria alba dwarf dwarf of height 90-105 cm.

12 with 3-4 branches and thick stem in big size HDPE bags as per direction Each 60.00 750.00

of the officer-in-charge. (West Indian Jasmine)

Providing and stacking of Pterospermum acerifolium (Kanak Champa) of

13 height 150-165 cm. in big poly bags of size 25 cm as per direction of the Each 60.00 65.00

officer-in-charge.

Providing and stacking of Ficus religiosa (Peepal) of height 150-165 cm. in

14 big poly bags of size 30 cm as per direction of the officer-in-charge. Each 50.00 65.00

Providing and stacking of Cassia fistula (Amaltash) of height 120-135 cm. in

15 big poly bags of size 25 cm as per direction of the officer-in-charge. Each 50.00 65.00

(Amaltash , Garmado)

Providing and stacking of Delonix regia (Gulmohar) of height 150-165 cm.

in big poly bags of size 25 cm as per direction of the officer-in-charge.

Providing and stacking of Foxtail palm of ht. 240-270 cm bottom girth 35-

17 40 cm well developed in big size HDPE bags as per direction of the officer- Each 27.00 650.00

Providing and stacking of Calliandra hybrida of height 105-120 cm., well

18 branched, bushy inbig size HDPE bag as per direction of the officer-in- Each 150.00 90.00

Providing and stacking of Caesalpinia pulcherrima species of height 45-60\

cm. in earthen pot of size 20 cm as per direction of the officer-in-charge.

Providing and stacking of Bauhinia tomentosa (yellow) of height 60-75 cm.

in earthen pots of size 20 cm as per direction of the officer-in-charge

Providing and stacking of Euphorbia caracasana (bronze colour leaves) of

21 height 60-75 cm. with 4-5 branches in bag of size 25 cm as per direction of Each 150.00 55.00

the officer-in-charge.

Providing and stacking of Hamelia patens of height 30-45 cm. with 3-4

22 branches in poly bags of size 20 cm as per direction of the officer-in- Each 120.00 20.00

Providing and stacking of Hibiscus rosasinensis of height 90-105 cm., bushy

in big size HDPE bag as per direction of the officer-in-charge

Providing and stacking of Tabernaemontana coronaria (Chandni single) of

24 height 90-105 cm.,bushy in big size HDPE bag as per direction of the officer- Each 120.00 80.00

Total cost (in Rs.) =

Veterinary Hospital

Description Unit Quantity Rate Amount

Excavation for foundation upto 1.5 m depth including sorting out and

1 stacking of useful materials and disposing off the excavated stuff upto 50 cum 91.00 122.99

Meter lead. (A) Loose or soft soil.

Excavation for foundation for depth from 1.5 m to 3.0 m including sorting

2 out and stacking of useful materials and disposing off the excavated stuff cum 24.00 136.33

upto 50 Meter lead. (A) Loose or soft soil.

Filling available excavated earth (excluding rock) in trenches. plinth, sides

3 of foundations etc. in layers not exceeding 20 cm. in depth consolidating cum 59.40 136.92

each disposited layer by ramming and watering.

Providing and laying cement concrete (M-10) 1:3:6 (1-Cement : 3- coarse

4 sand : 6- hand broken stone aggregates 40 mmnominal size) and curing cum 33.00 2,968.91

complete excluding cost of formwork in (A) Foundation and Plinth

Providing and laying controlled cement concrete M.250 with and curing

complete including the cost of formwork and reinforcement for reinforced

concrete work in (A) Foundations, footings, Base of columns and Mass

Providing and laying controlled cement concrete M.250 with and curing

6 complete including the cost of formwork and reinforcement for reinforced cum 14.00 7,729.49

concrete work in (D) Columns, Pillars posts and struts, upto floor two level.

Providing and laying controlled cement concrete M.250 with and curing

7 complete including the cost of formwork and reinforcement for reinforced cum 35.00 6,176.56

concrete work in (C) Beams, Girders upto floor two level.

Providing and laying controlled cement concrete M.250 with and curing

8 complete including the cost of formwork and reinforcement for reinforced cum 43.00 6,237.40

concrete work in (C) Slabs. upto floor two level.

Providing and laying controlled cement concrete M.250 with and curing

9 complete including the cost of formwork and reinforcement for reinforced cum 3.00 7,223.22

concrete work in (C) Lintels. upto floor two level.

Providing and laying controlled cement concrete M.250 with and curing

10 complete including the cost of formwork and reinforcement for reinforced cum 2.00 6,202.27

concrete work in (C) Cantilever Chajja upto floor two level.

Providing and laying controlled cement concrete M-250 for RCC works

including the cost machine mixing, vibrating, scaffolding, incl. cost of form

work / shuttering but excluding cost of reinforcement etc. complete up to

floor 2 level for Stair- Steps and Sofit Slab

Providing and laying controlled cement concrete M-250 for RCC works

including the cost machine mixing, vibrating, scaffolding, incl. cost of form

work / shuttering but excluding cost of reinforcement etc. complete up to

floor 2 level for copping

Filling in plinth with sand under floors including watering ramming,

consolidating and dressing complete

Description Unit Quantity Rate Amount

Providing TMT Bar FE 500D reinforcement for R.C.C. work including

bending, binding and placing in position complete upto floor two level

Brick work using common burnt clay building bricks having crushing

strength not less than 35kg / Sq. C. M. in ramp, steps and Foundation &

Plinth in cement morter1:5 (1 cement : 5 coarse sand) including racking

out joints, curing, scaffolding required if any etc.complete, as directed.

Brick masonry in cement mortar (1:5) using common burnt clay building

16 bricks having crushing strength not less than 35kg/csmt including cum 69.00 3,489.80

scaffolding,curing, etc. complete for walls, parapets, etc. at all levels.

Providing Half brick masonry in common burnt clay building bricks having

crushing strength not less than 35 Kg/csmt in C. M. 1:4 for partition work

including raking out joints, curing, scaffolding etc. complete as directed for

Providing and applying 15 mm thick cement plaster in single coat on brick

work with floating coat of net cement slurry for interior plastering of

pumphouse and outside plastering upto finished even and smooth in

Cement motar 1 : 3 (1 cement : 3 sand) including racking out joint curing,

scaffolding required if any, with necessary cement finishing etc. complete

20 mm thick sand faced cement plaster on walls upto height 10 metres

above ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-

cement : 3-sand) and 8 mm thick finishing coat of C.M. 1:1 (1-cement :

sand) etc. complete.

Finishing wall with weather proof exterior emulsion paint on wall surface

(two coats) to give an required shape even shade after thoroughly

brushing the surface to removal dirt, and remains of loose powdered

materials.etc complete

Distempering (two coats) with oil bound distemper of approved brand and

manufacture and or required shade on undecorated wall surface to give an

even shade, over and including a priming coat with distemper primer of

approved brand and manufacturer after thoroughly brushing the surface

free from mortar dropping and other foreign matter also including

preparing the surface even and sand papered smooth.

Applying two coats of Birla (white cement based) or Asian (acryliclapy

putty) or equivalent & two coats of primer of approved brand and

22 manufacture on new wall surface to give an even shade including Sqmt 497.00 40.59

thoroughly brushing the surface free from mortar dropping and other

foreign matte rand sand papered smooth.

Providing 100 mm x 100 mm size vata in cement mortar (1:1) including

smooth finish, curing, etc. complete.

Providing and laying 50 mm thick heavy duty cement concrete flooring

1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal

size) with ironite powder including finishing with a floating of neat cement

Description Unit Quantity Rate Amount

Providing and laying Vitrified tiles 8 to 10 mm thick , 36'' x 36'' in flooring

25 treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 Sqmt 170.00 1,531.82

(1-cement : 3-coarse sand ) finishing with flush pointing in white cement.

Providing and laying Vitrified tiles 8 to 10 mm thick , in skrting risers of

26 steps and dedo on 10mm thick cement plaster 1:3 (1-cement : 3-coarse Sqmt 7.00 1,592.40

sand) and jointed with white cement slurry

Providing and laying polished Kota stone slab flooring over 20 mm

(average) thick base of cement mortar 1:6 (1 cement : 6 coarse sand) laid

over and jointed with grey cement slurry including rubbing and polishing

etc. complete at Kitchen room & Store room. 30 mm thick

Providing and laying polished Kota stone slab 25 mm thick in riser of steps,

skirting Dedo & pillars laid on 10 mm thick cement mortar 1:3 (1 cement :

3 coarse sand) and jointed with grey cement slurry including rubbing and

polishing etc. complete

Constructing a cooking platform 60 cm. width and 70 cm high resting on

B.B.Masonry walls 23 cm.thick in C.M.(1:6) with (ii) Fixing black kadappa

stone 30mm thick laid on precast R.C.C. (1:2:4) slab with plastering on

exposed faces of wall in C.M. (1:4) etc complete.

Providing and fixing 35mm thick factory made moulded door shuter

consisting of solid core single leaff lush door of 30mm thickness, lipped

with 15mm (5mmx3) thick x30mm width on one stiles and top rail and

10mm (5mmx2) thickx 30mm width on the other stiles and bottom

rails.The inner panell aminated with 2mm thick termite proof, water proof

30 and fire resistant moulded PVC sheet with 2,4,6 raised panel design in smt 27.00 2,152.31

different plain and/or prelim colour so none side after routing the

moulded design on flush door and 2mm plain and/or prelim PVC sheet on

other side using rubber adhesive on flush door and solvent cement

adhesive on the PVC liping etc.complete as per direction of Engineer

incharge, manufacture’s specification and drawing.

Providing and fixing glazed louvered glass windows and ventilators

with teak wood frame 10cm. x 7cm. size including 3 coats of oil painting

to wood work etc.complete. with wooden louvers plank 12mm thick (upto

Providing and fixing M.S. grills of required pattern to wooden frames of

windows etc. with M.S. flats at required spacings and frame alround,

square or round bars with round headed bolts and nuts or by screws (A)

Providing precast cement concrete jali or louvers 40 mm thick 1:2:4 mix (1

cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size)

reinforced with 1.6 mm dia. Mild steel wire including roughening,

cleaning, fixing and finishing in CM 1:3 and curing, painting complete

34 Providing and fixing 160 PVC SWR pipes IS 13592 for Drain - 160 mmdia Rmt 98.00 515.27

Painting two coats including priming coat on new steel & other metal

35 surfaces with enamel paint, brushing, interior to give an even shade Sq.M. 100.00 92.17

including cleaning the surface of all dirt, dust, other foreign matter.

Description Unit Quantity Rate Amount

Providing throating or plaster drip and moulding to R.C.C. Chhajja as

instructed by Engineer in charge.

Providing and laying broken China Mosaic flooring for terrace using 12 mm

to 20 mm broken pieces of glazed tiles to be laid over Cement mortar 1:3

to plain or slope and to be tempered to bring mortar crème out upto

surfAEC using white cement including rounding of junctions and extending

them upto 15 cm. along the wall, clearing with water and oxalic acid etc. as

Extra for providing and mixing water proofing material in Cement concrete

38 per Quintal 90.00 49.16

in mix proportion recommended by the manufacturers.

Providing and laying coloured glazed tiles of the size 300 mm x 200 mm x

mm / 300 mm x 450 mm x 8 mm in skirting, risers of steps and dedo on

mm. thick cement plaster 1:3 (1 cement : 3 coarse sand) & jointed with

white cement slurry.

Providing and fixing wash down watercloset (Europeantype,W.C.Pan) with

integral Por S trap including jointing the trap with soil pipei n Cement

Mortar1:1(1-Cement:1-fine sand) (Seal and cover to beme asured and paid

40 for separately) (A)vitreous China Pattern :(i) in white colour No 1.00 2,274.09

32 dia. C. P. brass half turn flush cock complete including earthwork, bed

concrete of 1:4:8. , & Jet spray heavy duty with S.S. Braided hose 60 cm

Providing and fixing flat back white colour vitreous china wash basin

mm x 400 mm size with CI brackets painted white. Wash basin shall have

15 mm dia GI supply pipe, overflow chase, 15 mm dia pillar cock and stop

cock with chromium plated bottle trap, Rubber ring and PVC pipe piece

41 upto wall plus 32 mm dia PVC waste pipe upto floor level connected to 32 No. 2.00 2,506.67

mm dia CI pipe below floor and connected to nearby floor trap complete

with unions and plumber's white soldered joints with necessary cleaning

eye, complete. All chases cut in wall for fixing pipes shall be made good in

Providing and fixing Flat Back Urinal ( Hindware- 44cmx31.5cmx26.5cm)

or equivalent approved and of approved shade including fixing the same

42 in concealed CI brackets, CP spreader, CP dome shaped waste coupling, CP No. 1.00 1,619.12

bottle trap with flanges, CP angle cock flush pipe making inlet and out let

connections all complete as per the instruction of Engineer - In - Charge

Providing and fixing 600 mm. X 450 mm. Bevelled edge mirror of superior

43 glass mounted on 6 mm. Thick A.C, sheet or plywood sheet and fixed to No. 2.00 859.41

wooden plugs with C.P. brass screws and washers

Description Unit Quantity Rate Amount

Providing, laying and jointing in true line and level U.P.V.C. Pipe (SCH-40)

for including fittings make PRINCE / SUPREME / ASTRAL / FINOLEX or

equivalent as approved by Engineer In Charge. Pipe shall be fixed on the

44 wall with the help of clamp at every two metre C/C or shall be concelled as Rmt. 10.00 72.65

directed including necessary fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent, including cost of all materials.

Providing, laying and jointing in true line and level 110 diametre U.P.V.C

(Type B) conforming to IS 13592-1992 with one end plain and other end

socketed with rubber ring, & fittings conforming to ISI 14735-1999 of

approved make for drainage system pipe line, pipe shall be jointed with

each other with rubber lubricant, pipe shall be fixed on wall using of PVC

clamp of the size 110 mm diametre x 149 mm length x 145 mm heigh at

every 2000 mm center to center or shall be concealed in walls as directed

including necessary fittings such as bends, shoes etc. including testing of

pipes and joints and jointed with adhesive solvent cement including cost of

Providing & fixing gun metal check or non return full way wheel valve

52 Providing and fixing brass screw down stop tap. (A) 15mm dia. No 7.00 205.83

Providing and fixing screw down bib taps of following size.(C)Gun metal

screw down bib tap. i) 15mm dia.

Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1-cement: 2-

coarses and :4- graded stone aggregate 20 mm nominal size) foundation

concrete 1:3:6 mix (1-cement : 3-coarse sand : 6-Brick bats 40+50 mm size)

inside plastering 15 mm thick with Cement Mortar 1:5 (1-Cement : 5-

coarse sand)finished with a floating coat of neat cement and making

channels in cement concrete 1:2:4 mix (1-Cement: 2-Coarses and : 4-stone

54 aggregate 20 mm nominal size) finished smooth complete including curing No 2.00 11,042.74

and festing (i) Inside size 900mm x 1200 mm and 2.0 M. deep including C.I.

cover with frame size 560mm diameter total weight of cover and frame to

be not less than 128kgs. (Wt. of cover 64Kg. and Wt. of frame 64Kg.) (A)

With 230 mm thick walls of brick msonry using brick having crushing

strength not less than 35Kg./Sq.cm. in Cement Mortar 1:5 (1- Cement : 5-

Coarse sand) (1) A type depth 0.90 Metre for 150 mm diameter sewer.

Description Unit Quantity Rate Amount

Providing and supplying in standered length ISI mark rigid unplasticised

PVC pipes suitable for potable water with ringfit joint including cost of

rings, as per IS specification no. 4985/1988 including all local and central

55 taxes, transportation, freight charges,octroi,inspection charges, loading, Rmt 15.00 326.20

unloading conveyance to the departmental stores and including cost of

jointing material etc. complete Test pressure of 4 Kg./csmt of 160 mm dia

Providing and fixing cast iron (Spun) Nahni trap of the following nominal

diameter of self cleaning design with C.I. screaed down or hinged grating

including cost of cutting and making good the walls and floor 100mm inlet

and 50mm outlet. (C) 100mm dia.

Providing and fixing S.W. gully trap with C.I. grating brick masonry

chamber and water tight C. I. cover with frame of 300 mm x 300 mm size

(inside) with standard weight. (i) Square mouth traps.(B) 150mm x 100mm

size P or R type

Providing and fixing100mm size P or Strap for water closet squatting pan

58 including jointing the trap with the pan and soil pipe in cement Mortar1:1 No 4.00 332.52

(1-Cement : 1-Fine sand) (A) Vitreous China.

Providing and laying (to level or slopes) and jointing with stiff mixture of

59 Cement Mortar in proportion 1:1 Selt glazed stone ware pipes including Rmt. 40.00 317.28

testing of pipes and joints complete.(B)150mm dia.

Constructing brick masonry chamber for under ground C.I. Inspection

chamber and bends with bricks having crushing strength not less than

35Kg.Cm 2in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x 610mm

internal dimensions total weight of cover with frame to be not less than

38Kg. (Wt. of cover 23Kg.) and Wt. of frame 15Kg.) (R.C.C. top slab e with

1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate 20mm size)

foundation concrete 1:5:10 inside plaster 15mm thick with cement mortar

1:3 finished smooth with a floating coat of neat cement on walls and bed

concrete etc. complete. (ii) Inside dimensions 500mmx700mm and 450mm

deep for pipe line with one or two inlets. (upto 10 ton)

Providing erecting and fixing double coated ISI water tank of required

61 capacity of approved manufacture with all necessary fittings and liter 2000.00 3.95

connection etc. complete on terrace.

Description Unit Quantity Rate Amount

Providing and constructing Sewer manholes, scraper manholes and unit

house connection chamber, as per the type design in brick masonry in C.M.

1:5 and inside and outside 20mm thick plastering in C. M. 1:3 necessary

100 mm coping with reinforcement in R.C.C.M. 200 fixing C. I. steps and

fixing manhole frame and covers (But excluding supply of manhole frame

and covers) over manholes and house connection chambers and fixing

Manhole covers (but excluding supplying of manhole covers) over scraper

manhole etc. complete, providing and fixing safety chain wherever

necessary as per the stipulations in the type design complete as per latest

CPHEEO manual.(excl. excavation). Manhole type "A" Circular type having

inside diameter of 1200 mm for depth upto 1.5 m depth (for 150 mm to

500 mm dia sewer) Manhole type "A" as above but upto 1.0 M depth.

RCC precast M.H. Frame & Cover Manufacture, supply & Delivery at store

or at site of work precast RCC M.200 Frame & cover suitable to drainage

63 M.H. and as per type design & Drawing including cost of reinforcement Nos 1.00 1,289.15

M.S. Angles or Flat, curing mold work etc. Frame suitable for 50cm

opening of MH (A) For Circular manhole (heavy duty)

Cover suitable for 50 cm opening of MH (A) For Circular manhole (heavy

Providing and supplying ISI marked only Standard length Stoneware pipes

in standard lengths of following class and diameter including all taxes,

65 insurance, transportation, freight charges, octroi, inspection charges, Rmt 20.00 180.79

loading, unloading, conveyance to departmental stores, stacking etc.

complete. (IS - 651 / 1989) Class AA 150 mm Dia

Lowering, laying and jointing Stone Ware pipes of following diameters with

cement joints in C. M. 1:1 proportion in proper position, grade and

66 alignment at all level as directed by Engineer-in-charge including Rmt 20.00 101.20

conveyance from stores to site of work, Jointing material etc. comp.150

Dewatering by pumping set of required capacity including temporary

67 platform carting pumping at site and fixing the same in position including HP/hr 200.00 21.07

all accessories, and fuel and labour etc. complete.

68 Providing and fixing in position cowel went to pipes. (B) 75mm dia. No 2.00 393.04

Door closers (Heavy type of 765 number) Hardwire or EveritePrabhat or

71 C.P. Brass toilet paper holder of stand and size No 6.00 220.83

Providing and fixing C.P. brass towel rail comlete with C.P. brass brackets

fixed to wooden plugs with C.P. brass scews.(B) 600mm x 20mm size.

Filling in plinth with sand under floors including watering ramming,

consolidating and dressing complete

74 C.P. Brass 1/2 turn flush cock 32 mm dia No 6.00 236.24

75 Abonite ball cock 25mm dia No 6.00 88.16

Description Unit Quantity Rate Amount

Applying priming coat of over new steel and other metal surface after and

including preparing the surface by thoroughly cleaning, oil grease, dirt and

other foreign mater and scoured with brushes fine steel wool, scrapers and

sand paper with ready mixed priming paint brushing red lead.

Painting two coats (excluding priming coat) on new steel and other metal

surface with enamel paint, brusing interior to give an even shade including

cleaning the surface an even shade including cleaning the surface of all

dirt, dust and other foreign matter.

For Gate :- Steel work, welded in built up sections framed work including

cutting, hoisting, fixing in position and applying a priming coat of red lead

78 paint. (A)In beams and joists, channels angles Tees, flats, with connecting kg 1200.00 91.08

plates or angle cleats as in main and cross beams. Hip and jack rafters,

purlins conneted to common rafters and the like

5000 Litre Capacity UG Ractangular Tank

"Preparing structural design of RCC Under Ground / Partially under ground

/ above high ground level Reservoir of required capacity as per relevant I.S.

standards and constructing the same, including excavation in all types of

soil strata (including rock) including shoring strutting if required, for loose

soil / to protect from collapse, casting 100 mm thick P.C.C. levelling course

in M-15, Refilling the pit with proper soil and disposing of the surplus stuff

at all lead. Including cement plaster in CM 1:2 withapproved water

proofing compound to all over inside container (i.e. walls, base, top

79 slab/dome bottom etc. all). including all typesof labour and material Litre 5000.00 6.50

charges of lowering, laying, erecting / hosting and jointing of pipe

assembly to inlet, outlet overflow, washout and bye pass arrangement as

per hydraulic design. Providing and fixing accessories, CI Manhole frame

and cover, water level indicator, adequate cowl type ventilators or lantern

type ventilator with stainless steel jail. RCC chambers for valves.

Providing and applying three coats of cement paint / snowcem to the out

side face of structure. It also includes satisfactory water tightness test as

per relevant I.S. code and painting name of scheme and capacity on the

tank as per direction of engineer in charge."

Total cost (in Rs.) =

Office Building

Description Unit Quantity Rate Amount

Excavation for foundation upto 1.5 m depth including sorting out and

1 stacking of useful materials and disposing off the excavated stuff upto 50 cum 75.00 122.99

Meter lead. (A) Loose or soft soil.

Excavation for foundation for depth from 1.5 m to 3.0 m including sorting

2 out and stacking of useful materials and disposing off the excavated stuff cum 20.00 136.33

upto 50 Meter lead. (A) Loose or soft soil.

Filling available excavated earth (excluding rock) in trenches. plinth, sides

3 of foundations etc. in layers not exceeding 20 cm. in depth consolidating cum 55.67 136.92

each disposited layer by ramming and watering.

Providing and laying cement concrete (M-10) 1:3:6 (1-Cement : 3- coarse

4 sand : 6- hand broken stone aggregates 40 mmnominal size) and curing cum 20.00 2,968.91

complete excluding cost of formwork in (A) Foundation and Plinth

Providing and laying controlled cement concrete M.250 with and curing

complete including the cost of formwork and reinforcement for reinforced

concrete work in (A) Foundations, footings, Base of columns and Mass

Providing and laying controlled cement concrete M.250 with and curing

6 complete including the cost of formwork and reinforcement for reinforced cum 25.00 7,729.49

concrete work in (D) Columns, Pillars posts and struts, upto floor two level.

Providing and laying controlled cement concrete M.250 with and curing

7 complete including the cost of formwork and reinforcement for reinforced cum 31.00 6,176.56

concrete work in (C) Beams, Girders upto floor two level.

Providing and laying controlled cement concrete M.250 with and curing

8 complete including the cost of formwork and reinforcement for reinforced cum 44.00 6,237.40

concrete work in (C) Slabs. upto floor two level.

Providing and laying controlled cement concrete M.250 with and curing

9 complete including the cost of formwork and reinforcement for reinforced cum 2.00 7,223.22

concrete work in (C) Lintels. upto floor two level.

Providing and laying controlled cement concrete M.250 with and curing

10 complete including the cost of formwork and reinforcement for reinforced cum 3.00 6,202.27

concrete work in (C) Cantilever Chajja upto floor two level.

Providing and laying controlled cement concrete M-250 for RCC works

including the cost machine mixing, vibrating, scaffolding, incl. cost of form

work / shuttering but excluding cost of reinforcement etc. complete up to

floor 2 level for Stair- Steps and Sofit Slab

Providing and laying controlled cement concrete M-250 for RCC works

including the cost machine mixing, vibrating, scaffolding, incl. cost of form

work / shuttering but excluding cost of reinforcement etc. complete up to

floor 2 level for copping

Filling in plinth with sand under floors including watering ramming,

consolidating and dressing complete

Description Unit Quantity Rate Amount

Providing TMT Bar FE 500D reinforcement for R.C.C. work including

bending, binding and placing in position complete upto floor two level

Brick work using common burnt clay building bricks having crushing

strength not less than 35kg / Sq. C. M. in ramp, steps and Foundation &

Plinth in cement morter1:5 (1 cement : 5 coarse sand) including racking out

joints, curing, scaffolding required if any etc.complete, as directed.

Brick masonry in cement mortar (1:5) using common burnt clay building

16 bricks having crushing strength not less than 35kg/csmt including cum 93.00 3,489.80

scaffolding,curing, etc. complete for walls, parapets, etc. at all levels.

Providing Half brick masonry in common burnt clay building bricks having

crushing strength not less than 35 Kg/csmt in C. M. 1:4 for partition work

including raking out joints, curing, scaffolding etc. complete as directed for

Providing and applying 15 mm thick cement plaster in single coat on brick

work with floating coat of net cement slurry for interior plastering of

pumphouse and outside plastering upto finished even and smooth in

Cement motar 1 : 3 (1 cement : 3 sand) including racking out joint curing,

scaffolding required if any, with necessary cement finishing etc. complete

20 mm thick sand faced cement plaster on walls upto height 10 metres

above ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-

cement : 3-sand) and 8 mm thick finishing coat of C.M. 1:1 (1-cement :

sand) etc. complete.

Finishing wall with weather proof exterior emulsion paint on wall surface

(two coats) to give an required shape even shade after thoroughly

brushing the surface to removal dirt, and remains of loose powdered

materials etc. complete

Distempering (two coats) with oil bound distemper of approved brand and

manufacture and or required shade on undecorated wall surface to give an

even shade, over and including a priming coat with distemper primer of

approved brand and manufacturer after thoroughly brushing the surface

free from mortar dropping and other foreign matter also including

preparing the surface even and sand papered smooth.

Applying two coats of Birla(white cement based) or Asian (acryliclapy

putty) or equivalent & two coats of primer of approved brand and

22 manufacture on new wall surface to give an even shade including Sqmt 691.00 40.59

thoroughly brushing the surface free from mortar dropping and other

foreign matte rand sand papered smooth.

Providing 100 mm x 100 mm size vata in cement mortar (1:1) including

smooth finish, curing, etc. complete.

Providing and laying 50 mm thick heavy duty cement concrete flooring

1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal

size) with ironite powder including finishing with a floating of neat cement

Description Unit Quantity Rate Amount

Providing and laying Vitrified tiles 8 to 10 mm thick, 36'' x 36'' in flooring

25 treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 Sqmt 191.00 1,531.82

(1-cement : 3-coarse sand ) finishing with flush pointing in white cement.

Providing and laying Vitrified tiles 8 to 10 mm thick , in skrting risers of

26 steps and dedo on 10mm thick cement plaster 1:3 (1-cement : 3-coarse Sqmt 6.00 1,592.40

sand) and jointed with white cement slurry

Providing and laying polished Kota stone slab flooring over 20 mm

(average) thick base of cement mortar 1:6 (1 cement : 6 coarse sand) laid

over and jointed with grey cement slurry including rubbing and polishing

etc. complete at Kitchen room & Store room. 30 mm thick

Providing and laying polished Kota stone slab 25 mm thick in riser of steps,

skirting Dedo & pillars laid on 10 mm thick cement mortar 1:3 (1 cement :

coarse sand) and jointed with grey cement slurry including rubbing and

polishing etc. complete

Constructing a cooking platform 60 cm. width and 70 cm high resting on

B.B.Masonry walls 23 cm.thick in C.M.(1:6) with (ii) Fixing black kadappa

stone 30mm thick laid on precast R.C.C. (1:2:4) slab with plastering on

exposed faces of wall in C.M. (1:4) etc complete.

Providing and fixing 35mm thick factory made moulded door shuter

consisting of solid core single leaff lush door of 30mm thickness, lipped

with 15mm (5mmx3) thick x30mm width on one stiles and top rail and

10mm (5mmx2) thickx 30mm width on the other stiles and bottom

rails.The inner panell aminated with 2mm thick termite proof, water proof

30 and fire resistant moulded PVC sheet with 2,4,6 raised panel design in smt 27.00 2,152.31

different plain and/or prelim colour so none side after routing the

moulded design on flush door and 2mm plain and/or prelim PVC sheet on

other side using rubber adhesive on flush door and solvent cement

adhesive on the PVC liping etc.complete as per direction of Engineer

incharge, manufacture’s specification and drawing.

Providing and fixing glazed louvered glass windows and ventilators

31 with teak wood frame 10cm. x 7cm. size including 3 coats of oil painting smt 1.00 4,434.35

to wood work etc.complete. with wooden louvers plank 12mm thick.

Providing and fixing M.S. grills of required pattern to wooden frames of

windows etc. with M.S. flats at required spacings and frame alround,

square or round bars with round headed bolts and nuts or by screws (A)

Providing precast cement concrete jali or louvers 40 mm thick 1:2:4 mix (1

cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size)

reinforced with 1.6 mm dia. Mild steel wire including roughening,

cleaning, fixing and finishing in CM 1:3 and curing, painting complete

34 Providing and fixing 160 PVC SWR pipes IS 13592 for Drain - 160 mm dia Rmt 98.00 515.27

Painting two coats including priming coat on new steel & other metal

35 surfaces with enamel paint, brushing, interior to give an even shade Sq.M. 100.00 92.17

including cleaning the surface of all dirt, dust, other foreign matter.

Description Unit Quantity Rate Amount

Providing throating or plaster drip and moulding to R.C.C. Chhajja as

instructed by Engineer in charge.

Providing and laying broken China Mosaic flooring for terrace using 12 mm

to 20 mm broken pieces of glazed tiles to be laid over Cement mortar 1:3

to plain or slope and to be tempered to bring mortar crème out upto

surfAEC using white cement including rounding of junctions and extending

them upto 15 cm. along the wall, clearing with water and oxalic acid etc. as

Extra for providing and mixing water proofing material in Cement concrete

38 per Quintal 90.00 49.16

in mix proportion recommended by the manufacturers.

Providing and laying coloured glazed tiles of the size 300 mm x 200 mm x

mm / 300 mm x 450 mm x 8 mm in skirting, risers of steps and dedo on

mm. thick cement plaster 1:3 (1 cement : 3 coarse sand) & jointed with

white cement slurry.

Providing and fixing wash down watercloset (Europeantype,W.C.Pan) with

integral Por S trap including jointing the trap with soil pipei n Cement

Mortar1:1(1-Cement:1-fine sand) (Seal and cover to beme asured and paid

for separately) (A)vitreous China Pattern :(i) in white colour 32 dia. C. P.

brass half turn flush cock complete including earthwork, bed concrete of

1:4:8. , & Jet spray heavy duty with S.S. Braided hose 60 cm long

Providing and fixing flat back white colour vitreous china wash basin

mm x 400 mm size with CI brackets painted white. Wash basin shall have

15 mm dia GI supply pipe, overflow chase, 15 mm dia pillar cock and stop

cock with chromium plated bottle trap, Rubber ring and PVC pipe piece

41 upto wall plus 32 mm dia PVC waste pipe upto floor level connected to 32 No. 2.00 2,506.67

mm dia CI pipe below floor and connected to nearby floor trap complete

with unions and plumber's white soldered joints with necessary cleaning

eye, complete. All chases cut in wall for fixing pipes shall be made good in

Providing and fixing Flat Back Urinal (Hindware- 44 cm x 31.5 cm x

cm) or equivalent approved and of approved shade including fixing the

same in concealed CI brackets, CP spreader, CP dome shaped waste

coupling, CP bottle trap with flanges, CP angle cock flush pipe making inlet

and out let connections all complete as per the instruction of Engineer - In -

Providing and fixing 600 mm. X 450 mm. Bevelled edge mirror of superior

43 glass mounted on 6 mm. Thick A.C, sheet or plywood sheet and fixed to No. 2.00 859.41

wooden plugs with C.P. brass screws and washers

Description Unit Quantity Rate Amount

Providing, laying and jointing in true line and level U.P.V.C. Pipe (SCH-40)

for including fittings make PRINCE / SUPREME / ASTRAL / FINOLEX or

equivalent as approved by Engineer In Charge. Pipe shall be fixed on the

44 wall with the help of clamp at every two metre C/C or shall be concelled as Rmt. 10.00 72.65

directed including necessary fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent, including cost of all materials.

Providing, laying and jointing in true line and level 110 diametre U.P.V.C

(Type B) conforming to IS 13592-1992 with one end plain and other end

socketed with rubber ring, & fittings conforming to ISI 14735-1999 of

approved make for drainage system pipe line, pipe shall be jointed with

each other with rubber lubricant, pipe shall be fixed on wall using of PVC

clamp of the size 110 mm diametre x 149 mm length x 145 mm heigh at

every 2000 mm center to center or shall be concealed in walls as directed

including necessary fittings such as bends, shoes etc. including testing of

pipes and joints and jointed with adhesive solvent cement including cost of

Providing & fixing gun metal check or non return full way wheel valve

52 Providing and fixing brass screw down stop tap. (A) 15mm dia. No 7.00 205.83

Providing and fixing screw down bib taps of following size.(C)Gun metal

screw down bib tap. i) 15mm dia.

Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1-cement: 2-

coarses and :4- graded stone aggregate 20 mm nominal size) foundation

concrete 1:3:6 mix (1-cement : 3-coarse sand : 6-Brick bats 40+50 mm size)

inside plastering 15 mm thick with Cement Mortar 1:5 (1-Cement : 5-

coarse sand)finished with a floating coat of neat cement and making

channels in cement concrete 1:2:4 mix (1-Cement: 2-Coarses and : 4-stone

54 aggregate 20 mm nominal size) finished smooth complete including curing No 2.00 11,042.74

and festing (i) Inside size 900mm x 1200 mm and 2.0 M. deep including C.I.

cover with frame size 560mm diameter total weight of cover and frame to

be not less than 128kgs. (Wt. of cover 64Kg. and Wt. of frame 64Kg.) (A)

With 230 mm thick walls of brick msonry using brick having crushing

strength not less than 35Kg./Sq.cm. in Cement Mortar 1:5 (1- Cement : 5-

Coarse sand) (1) A type depth 0.90 Metre for 150 mm diameter sewer.

Providing and supplying in standered length ISI mark rigid unplasticised

PVC pipes suitable for potable water with ringfit joint including cost of

rings, as per IS specification no. 4985/1988 including all local and central

55 taxes, transportation, freight charges,octroi,inspection charges, loading, Rmt 15.00 326.20

unloading conveyance to the departmental stores and including cost of

jointing material etc. complete Test pressure of 4 Kg./csmt of 160 mm dia

Description Unit Quantity Rate Amount

Providing and fixing cast iron (Spun) Nahni trap of the following nominal

diameter of self cleaning design with C.I. screaed down or hinged grating

including cost of cutting and making good the walls and floor 100mm inlet

and 50mm outlet. (C) 100mm dia.

Providing and fixing S.W. gully trap with C.I. grating brick masonry chamber

and water tight C. I. cover with frame of 300 mm x 300 mm size (inside)

with standard weight. (i) Square mouth traps.(B) 150mm x 100mm size P or

Providing and fixing100mm size P or Strap for water closet squatting pan

58 including jointing the trap with the pan and soil pipe in cement Mortar1:1 No 4.00 332.52

(1-Cement : 1-Fine sand) (A) Vitreous China.

Providing and laying (to level or slopes) and jointing with stiff mixture of

59 Cement Mortar in proportion 1:1 Selt glazed stone ware pipes including Rmt. 40.00 317.28

testing of pipes and joints complete.(B)150mm dia.

Constructing brick masonry chamber for under ground C.I. Inspection

chamber and bends with bricks having crushing strength not less than

35Kg.Cm 2in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x 610mm

internal dimensions total weight of cover with frame to be not less than

38Kg. (Wt. of cover 23Kg.) and Wt. of frame 15Kg.) (R.C.C. top slab e with

1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate 20mm size)

foundation concrete 1:5:10 inside plaster 15mm thick with cement mortar

1:3 finished smooth with a floating coat of neat cement on walls and bed

concrete etc. complete. (ii) Inside dimensions 500mmx700mm and 450mm

deep for pipe line with one or two inlets. (upto 10 ton)

Providing erecting and fixing double coated ISI water tank of required

61 capacity of approved manufacture with all necessary fittings and liter 25000.00 3.95

connection etc. complete on terrace.

Providing and constructing Sewer manholes, scraper manholes and unit

house connection chamber, as per the type design in brick masonry in C.M.

1:5 and inside and outside 20mm thick plastering in C. M. 1:3 necessary

100 mm coping with reinforcement in R.C.C.M. 200 fixing C. I. steps and

fixing manhole frame and covers (But excluding supply of manhole frame

and covers) over manholes and house connection chambers and fixing

Manhole covers (but excluding supplying of manhole covers) over scraper

manhole etc. complete, providing and fixing safety chain wherever

necessary as per the stipulations in the type design complete as per latest

CPHEEO manual.(excl. excavation). Manhole type "A" Circular type having

inside diameter of 1200 mm for depth upto 1.5 m depth (for 150 mm to

500 mm dia sewer) Manhole type "A" as above but upto 1.0 M depth.

RCC precast M.H. Frame & Cover Manufacture, supply & Delivery at store

or at site of work precast RCC M.200 Frame & cover suitable to drainage

63 M.H. and as per type design & Drawing including cost of reinforcement Nos 1.00 1,289.15

M.S. Angles or Flat, curing mold work etc. Frame suitable for 50cm opening

of MH (A) For Circular manhole (heavy duty)

Description Unit Quantity Rate Amount

Cover suitable for 50cm opening of MH (A) For Circular manhole (heavy

Providing and supplying ISI marked only Standard length Stoneware pipes

in standard lengths of following class and diameter including all taxes,

65 insurance, transportation, freight charges, octroi, inspection charges, Rmt 20.00 180.79

loading, unloading, conveyance to departmental stores, stacking etc.

complete. (IS - 651 / 1989) Class AA 150 mm Dia

Lowering, laying and jointing Stone Ware pipes of following diameters with

cement joints in C. M. 1:1 proportion in proper position, grade and

66 alignment at all level as directed by Engineer-in-charge including Rmt 20.00 101.20

conveyance from stores to site of work, Jointing material etc. comp.150

Dewatering by pumping set of required capacity including temporary

67 platform carting pumping at site and fixing the same in position including HP/hr 200.00 21.07

all accessories, and fuel and labour etc. complete.

68 Providing and fixing in position cowel went to pipes. (B) 75mm dia. No 2.00 393.04

Door closers (Heavy type of 765 number) Hardwire or EveritePrabhat or

71 C.P. Brass toilet paper holder of stand and size No 6.00 220.83

Providing and fixing C.P. brass towel rail comlete with C.P. brass brackets

fixed to wooden plugs with C.P. brass scews.(B) 600mm x 20mm size.

Filling in plinth with sand under floors including watering ramming,

consolidating and dressing complete

74 C.P. Brass 1/2 turn flush cock 32 mm dia No 6.00 236.24

75 Abonite ball cock 25mm dia No 6.00 88.16

Applying priming coat of over new steel and other metal surface after and

including preparing the surface by thoroughly cleaning, oil grease, dirt and

other foreign mater and scoured with brushes fine steel wool, scrapers and

sand paper with ready mixed priming paint brushing red lead.

Painting two coats (excluding priming coat) on new steel and other metal

surface with enamel paint, brusing interior to give an even shade including

cleaning the surface an even shade including cleaning the surface of all

dirt, dust and other foreign matter.

For Gate :- Steel work, welded in built up sections framed work including

cutting, hoisting, fixing in position and applying a priming coat of red lead

78 paint. (A)In beams and joists, channels angles Tees, flats, with connecting kg 1200.00 91.08

plates or angle cleats as in main and cross beams. Hip and jack rafters,

purlins conneted to common rafters and the like

Description Unit Quantity Rate Amount

5000 Litre Capacity UG Ractangular Tank

"Preparing structural design of RCC Under Ground / Partially under ground

/ above high ground level Reservoir of required capacity as per relevant I.S.

standards and constructing the same, including excavation in all types of

soil strata (including rock) including shoring strutting if required, for loose

soil / to protect from collapse, casting 100 mm thick P.C.C. levelling course

in M-15, Refilling the pit with proper soil and disposing of the surplus stuff

at all lead. Including cement plaster in CM 1:2 withapproved water

proofing compound to all over inside container (i.e. walls, base, top

slab/dome bottom etc. all). Including all typesof labour and material

charges of lowering, laying, erecting / hosting and jointing of pipe assembly

to inlet, outlet overflow, washout and bye pass arrangement as per

hydraulic design. Providing and fixing accessories, CI Manhole frame and

cover, water level indicator, adequate cowl type ventilators or lantern type

ventilator with stainless steel jail. RCC chambers for valves. Providing and

applying three coats of cement paint / snowcem to the out side face of

structure. It also includes satisfactory water tightness test as per relevant

I.S. code and painting name of scheme and capacity on the tank as per

direction of engineer

Total cost (in Rs.) =

Milk Processing Unit

Description Unit Quantity Rate Amount

Excavation for foundation upto 1.5 m depth including sorting out and

1 stacking of useful materials and disposing off the excavated stuff upto 50 cum 93.00 122.99

Meter lead. (A) Loose or soft soil.

Excavation for foundation for depth from 1.5 m to 3.0 m including sorting

2 out and stacking of useful materials and disposing off the excavated stuff cum 24.00 136.33

upto 50 Meter lead. (A) Loose or soft soil.

Filling available excavated earth (excluding rock) in trenches. plinth, sides

3 of foundations etc. in layers not exceeding 20 cm. in depth consolidating cum 68.36 136.92

each disposited layer by ramming and watering.

Providing and laying cement concrete (M-10) 1:3:6 (1-Cement : 3- coarse

4 sand : 6- hand broken stone aggregates 40 mmnominal size) and curing cum 26.00 2,968.91

complete excluding cost of formwork in (A) Foundation and Plinth

Providing and laying controlled cement concrete M.250 with and curing

complete including the cost of formwork and reinforcement for reinforced

concrete work in (A) Foundations, footings, Base of columns and Mass

Providing and laying controlled cement concrete M.250 with and curing

6 complete including the cost of formwork and reinforcement for reinforced cum 22.00 7,729.49

concrete work in (D) Columns, Pillars posts and struts, upto floor two level.

Providing and laying controlled cement concrete M.250 with and curing

7 complete including the cost of formwork and reinforcement for reinforced cum 25.00 6,176.56

concrete work in (C) Beams, Girders upto floor two level.

Providing and laying controlled cement concrete M.250 with and curing

8 complete including the cost of formwork and reinforcement for reinforced cum 32.00 6,237.40

concrete work in (C) Slabs. upto floor two level.

Providing and laying controlled cement concrete M.250 with and curing

9 complete including the cost of formwork and reinforcement for reinforced cum 2.00 7,223.22

concrete work in (C) Lintels. upto floor two level.

Providing and laying controlled cement concrete M.250 with and curing

10 complete including the cost of formwork and reinforcement for reinforced cum 1.00 6,202.27

concrete work in (C) Cantilever Chajja upto floor two level.

Providing and laying controlled cement concrete M-250 for RCC works

including the cost machine mixing, vibrating, scaffolding, incl. cost of form

work / shuttering but excluding cost of reinforcement etc. complete up to

floor 2 level for Stair- Steps and Sofit Slab

Providing and laying controlled cement concrete M-250 for RCC works

including the cost machine mixing, vibrating, scaffolding, incl. cost of form

work / shuttering but excluding cost of reinforcement etc. complete up to

floor 2 level for copping

Filling in plinth with sand under floors including watering ramming,

consolidating and dressing complete

Description Unit Quantity Rate Amount

Providing TMT Bar FE 500D reinforcement for R.C.C. work including

bending, binding and placing in position complete upto floor two level

Brick work using common burnt clay building bricks having crushing

strength not less than 35kg / Sq. C. M. in ramp, steps and Foundation &

Plinth in cement morter1:5 (1 cement : 5 coarse sand) including racking

out joints, curing, scaffolding required if any etc.complete, as directed.

Brick masonry in cement mortar (1:5) using common burnt clay building

16 bricks having crushing strength not less than 35kg/csmt including cum 105.00 3,489.80

scaffolding,curing, etc. complete for walls, parapets, etc. at all levels.

Providing and applying 15 mm thick cement plaster in single coat on brick

work with floating coat of net cement slurry for interior plastering of

pumphouse and outside plastering upto finished even and smooth in

Cement motar 1 : 3 (1 cement : 3 sand) including racking out joint curing,

scaffolding required if any, with necessary cement finishing etc. complete

20 mm thick sand faced cement plaster on walls upto height 10 metres

above ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-

cement : 3-sand) and 8 mm thick finishing coat of C.M. 1:1 (1-cement :

sand) etc. complete.

Finishing wall with weather proof exterior emulsion paint on wall surface

(two coats) to give an required shape even shade after thoroughly

brushing the surface to removal dirt, and remains of loose powdered

materials etc. complete

Distempering (two coats) with oil bound distemper of approved brand and

manufacture and or required shade on undecorated wall surface to give an

even shade, over and including a priming coat with distemper primer of

approved brand and manufacturer after thoroughly brushing the surface

free from mortar dropping and other foreign matter also including

preparing the surface even and sand papered smooth.

Applying two coats of Birla(white cement based) or Asian (acryliclapy

putty) or equivalent & two coats of primer of approved brand and

21 manufacture on new wall surface to give an even shade including Sqmt 398.00 40.59

thoroughly brushing the surface free from mortar dropping and other

foreign matte rand sand papered smooth.

Providing 100 mm x 100 mm size vata in cement mortar (1:1) including

smooth finish, curing, etc. complete.

Providing and laying 50 mm thick heavy duty cement concrete flooring

1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal

size) with ironite powder including finishing with a floating of neat cement

Providing and laying Vitrified tiles 8 to 10 mm thick, 36'' x 36'' in flooring

24 treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 Sqmt 220.00 1,531.82

(1-cement : 3-coarse sand ) finishing with flush pointing in white cement.

Description Unit Quantity Rate Amount

Providing and laying Vitrified tiles 8 to 10 mm thick , in skrting risers of

25 steps and dedo on 10mm thick cement plaster 1:3 (1-cement : 3-coarse Sqmt 6.00 1,592.40

sand) and jointed with white cement slurry

Providing and laying polished Kota stone slab flooring over 20 mm

(average) thick base of cement mortar 1:6 (1 cement : 6 coarse sand) laid

over and jointed with grey cement slurry including rubbing and polishing

etc. complete at Kitchen room & Store room. 30 mm thick

Providing and laying polished Kota stone slab 25 mm thick in riser of steps,

skirting Dedo & pillars laid on 10 mm thick cement mortar 1:3 (1 cement :

3 coarse sand) and jointed with grey cement slurry including rubbing and

polishing etc. complete

Constructing a cooking platform 60 cm. width and 70 cm high resting on

B.B.Masonry walls 23 cm.thick in C.M.(1:6) with (ii) Fixing black kadappa

stone 30mm thick laid on precast R.C.C. (1:2:4) slab with plastering on

exposed faces of wall in C.M. (1:4) etc complete.

Providing and fixing 35mm thick factory made moulded door shuter

consisting of solid core single leaff lush door of 30mm thickness, lipped

with 15mm (5mmx3) thick x30mm width on one stiles and top rail and

10mm (5mmx2) thickx 30mm width on the other stiles and bottom

rails.The inner panell aminated with 2mm thick termite proof, water proof

29 and fire resistant moulded PVC sheet with 2,4,6 raised panel design in smt 27.00 2,152.31

different plain and/or prelim colour so none side after routing the

moulded design on flush door and 2mm plain and/or prelim PVC sheet on

other side using rubber adhesive on flush door and solvent cement

adhesive on the PVC liping etc.complete as per direction of Engineer

incharge, manufacture’s specification and drawing.

Providing and fixing glazed louvered glass windows and ventilators

30 with teak wood frame 10cm. x 7cm. size including 3 coats of oil painting smt 1.00 4,434.35

to wood work etc.complete. with wooden louvers plank 12mm thick.

Providing and fixing M.S. grills of required pattern to wooden frames of

windows etc. with M.S. flats at required spacings and frame alround,

square or round bars with round headed bolts and nuts or by screws (A)

Providing precast cement concrete jali or louvers 40 mm thick 1:2:4 mix (1

cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size)

reinforced with 1.6 mm dia. Mild steel wire including roughening,

cleaning, fixing and finishing in CM 1:3 and curing, painting complete

33 Providing and fixing 160 PVC SWR pipes IS 13592 for Drain - 160 mm dia Rmt 98.00 515.27

Painting two coats including priming coat on new steel & other metal

34 surfaces with enamel paint, brushing, interior to give an even shade Sq.M. 100.00 92.17

including cleaning the surface of all dirt, dust, other foreign matter.

Providing throating or plaster drip and moulding to R.C.C. Chhajja as

instructed by Engineer in charge.

Description Unit Quantity Rate Amount

Providing and laying broken China Mosaic flooring for terrace using 12 mm

to 20 mm broken pieces of glazed tiles to be laid over Cement mortar 1:3

to plain or slope and to be tempered to bring mortar crème out upto

surfAEC using white cement including rounding of junctions and extending

them upto 15 cm. along the wall, clearing with water and oxalic acid etc. as

Extra for providing and mixing water proofing material in Cement concrete

37 per Quintal 90.00 49.16

in mix proportion recommended by the manufacturers.

Providing and fixing wash down watercloset (Europeantype,W.C.Pan) with

integral Por S trap including jointing the trap with soil pipei n Cement

Mortar1:1(1-Cement:1-fine sand) (Seal and cover to beme asured and paid

for separately) (A)vitreous China Pattern :(i) in white colour 32 dia. C. P.

brass half turn flush cock complete including earthwork, bed concrete of

1:4:8. , & Jet spray heavy duty with S.S. Braided hose 60 cm long

Providing and fixing flat back white colour vitreous china wash basin

mm x 400 mm size with CI brackets painted white. Wash basin shall have

15 mm dia GI supply pipe, overflow chase, 15 mm dia pillar cock and stop

cock with chromium plated bottle trap, Rubber ring and PVC pipe piece

39 upto wall plus 32 mm dia PVC waste pipe upto floor level connected to 32 No. 2.00 2,506.67

mm dia CI pipe below floor and connected to nearby floor trap complete

with unions and plumber's white soldered joints with necessary cleaning

eye, complete. All chases cut in wall for fixing pipes shall be made good in

Providing and fixing Flat Back Urinal (Hindware- 44 cm x 31.5 cm x

cm) or equivalent approved and of approved shade including fixing the

same in concealed CI brackets, CP spreader, CP dome shaped waste

coupling, CP bottle trap with flanges, CP angle cock flush pipe making inlet

and out let connections all complete as per the instruction of Engineer - In -

Providing and fixing 600 mm. X 450 mm. Bevelled edge mirror of superior

41 glass mounted on 6 mm. Thick A.C, sheet or plywood sheet and fixed to No. 2.00 859.41

wooden plugs with C.P. brass screws and washers

Providing, laying and jointing in true line and level U.P.V.C. Pipe (SCH-40)

for including fittings make PRINCE / SUPREME / ASTRAL / FINOLEX or

equivalent as approved by Engineer In Charge. Pipe shall be fixed on the

42 wall with the help of clamp at every two metre C/C or shall be concelled as Rmt. 10.00 72.65

directed including necessary fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent, including cost of all materials.

Description Unit Quantity Rate Amount

Providing, laying and jointing in true line and level 110 diametre U.P.V.C

(Type B) conforming to IS 13592-1992 with one end plain and other end

socketed with rubber ring, & fittings conforming to ISI 14735-1999 of

approved make for drainage system pipe line, pipe shall be jointed with

each other with rubber lubricant, pipe shall be fixed on wall using of PVC

clamp of the size 110 mm diametre x 149 mm length x 145 mm heigh at

every 2000 mm center to center or shall be concealed in walls as directed

including necessary fittings such as bends, shoes etc. including testing of

pipes and joints and jointed with adhesive solvent cement including cost of

Providing & fixing gun metal check or non return full way wheel valve

50 Providing and fixing brass screw down stop tap. (A) 15mm dia. No 7.00 205.83

Providing and fixing screw down bib taps of following size.(C)Gun metal

screw down bib tap. i) 15mm dia.

Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1-cement: 2-

coarses and :4- graded stone aggregate 20 mm nominal size) foundation

concrete 1:3:6 mix (1-cement : 3-coarse sand : 6-Brick bats 40+50 mm size)

inside plastering 15 mm thick with Cement Mortar 1:5 (1-Cement : 5-

coarse sand)finished with a floating coat of neat cement and making

channels in cement concrete 1:2:4 mix (1-Cement: 2-Coarses and : 4-stone

52 aggregate 20 mm nominal size) finished smooth complete including curing No 2.00 11,042.74

and festing (i) Inside size 900mm x 1200 mm and 2.0 M. deep including C.I.

cover with frame size 560mm diameter total weight of cover and frame to

be not less than 128kgs. (Wt. of cover 64Kg. and Wt. of frame 64Kg.) (A)

With 230 mm thick walls of brick msonry using brick having crushing

strength not less than 35Kg./Sq.cm. in Cement Mortar 1:5 (1- Cement : 5-

Coarse sand) (1) A type depth 0.90 Metre for 150 mm diameter sewer.

Providing and supplying in standered length ISI mark rigid unplasticised

PVC pipes suitable for potable water with ringfit joint including cost of

rings, as per IS specification no. 4985/1988 including all local and central

53 taxes, transportation, freight charges,octroi,inspection charges, loading, Rmt 15.00 326.20

unloading conveyance to the departmental stores and including cost of

jointing material etc. complete Test pressure of 4 Kg./csmt of 160 mm dia

Providing and fixing cast iron (Spun) Nahni trap of the following nominal

diameter of self cleaning design with C.I. screaed down or hinged grating

including cost of cutting and making good the walls and floor 100mm inlet

and 50mm outlet. (C) 100mm dia.

Providing and fixing S.W. gully trap with C.I. grating brick masonry

chamber and water tight C. I. cover with frame of 300 mm x 300 mm size

(inside) with standard weight. (i) Square mouth traps.(B) 150mm x 100mm

size P or R type

Description Unit Quantity Rate Amount

Providing and fixing100mm size P or Strap for water closet squatting pan

56 including jointing the trap with the pan and soil pipe in cement Mortar1:1 No 4.00 332.52

(1-Cement : 1-Fine sand) (A) Vitreous China.

Providing and laying (to level or slopes) and jointing with stiff mixture of

57 Cement Mortar in proportion 1:1 Selt glazed stone ware pipes including Rmt. 40.00 317.28

testing of pipes and joints complete.(B)150mm dia.

Constructing brick masonry chamber for under ground C.I. Inspection

chamber and bends with bricks having crushing strength not less than

35Kg.Cm 2in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x 610mm

internal dimensions total weight of cover with frame to be not less than

38Kg. (Wt. of cover 23Kg.) and Wt. of frame 15Kg.) (R.C.C. top slab e with

1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate 20mm size)

foundation concrete 1:5:10 inside plaster 15mm thick with cement mortar

1:3 finished smooth with a floating coat of neat cement on walls and bed

concrete etc. complete. (ii) Inside dimensions 500mmx700mm and 450mm

deep for pipe line with one or two inlets. (upto 10 ton)

Providing erecting and fixing double coated ISI water tank of required

59 capacity of approved manufacture with all necessary fittings and liter 1000.00 3.95

connection etc. complete on terrace.

Providing and constructing Sewer manholes, scraper manholes and unit

house connection chamber, as per the type design in brick masonry in C.M.

1:5 and inside and outside 20mm thick plastering in C. M. 1:3 necessary

100 mm coping with reinforcement in R.C.C.M. 200 fixing C. I. steps and

fixing manhole frame and covers (But excluding supply of manhole frame

and covers) over manholes and house connection chambers and fixing

Manhole covers (but excluding supplying of manhole covers) over scraper

manhole etc. complete, providing and fixing safety chain wherever

necessary as per the stipulations in the type design complete as per latest

CPHEEO manual.(excl. excavation). Manhole type "A" Circular type having

inside diameter of 1200 mm for depth upto 1.5 m depth (for 150 mm to

500 mm dia sewer) Manhole type "A" as above but upto 1.0 M depth.

RCC precast M.H. Frame & Cover Manufacture, supply & Delivery at store

or at site of work precast RCC M.200 Frame & cover suitable to drainage

61 M.H. and as per type design & Drawing including cost of reinforcement Nos 1.00 1,289.15

M.S. Angles or Flat, curing mold work etc. Frame suitable for 50cm

opening of MH (A) For Circular manhole (heavy duty)

Cover suitable for 50cm opening of MH (A) For Circular manhole (heavy

Providing and supplying ISI marked only Standard length Stoneware pipes

in standard lengths of following class and diameter including all taxes,

63 insurance, transportation, freight charges, octroi, inspection charges, Rmt 20.00 180.79

loading, unloading, conveyance to departmental stores, stacking etc.

complete. (IS - 651 / 1989) Class AA 150 mm Dia

Description Unit Quantity Rate Amount

Lowering, laying and jointing Stone Ware pipes of following diameters with

cement joints in C. M. 1:1 proportion in proper position, grade and

64 alignment at all level as directed by Engineer-in-charge including Rmt 20.00 101.20

conveyance from stores to site of work, Jointing material etc. comp.150

65 Providing and fixing in position cowel went to pipes. (B) 75mm dia. No 2.00 393.04

Door closers (Heavy type of 765 number) Hardwire or EveritePrabhat or

68 C.P. Brass toilet paper holder of stand and size No 6.00 220.83

Providing and fixing C.P. brass towel rail comlete with C.P. brass brackets

fixed to wooden plugs with C.P. brass scews.(B) 600mm x 20mm size.

Filling in plinth with sand under floors including watering ramming,

consolidating and dressing complete

71 C.P. Brass 1/2 turn flush cock 32 mm dia No 6.00 236.24

72 Abonite ball cock 25mm dia No 6.00 88.16

Applying priming coat of over new steel and other metal surface after and

including preparing the surface by thoroughly cleaning, oil grease, dirt and

other foreign mater and scoured with brushes fine steel wool, scrapers and

sand paper with ready mixed priming paint brushing red lead.

Painting two coats (excluding priming coat) on new steel and other metal

surface with enamel paint, brusing interior to give an even shade including

cleaning the surface an even shade including cleaning the surface of all

dirt, dust and other foreign matter.

Steel work, welded in built up sections framed work including cutting,

hoisting, fixing in position and applying a priming coat of red lead paint.

(A)In beams and joists, channels angles Tees, flats, with connecting plates

or angle cleats as in main and cross beams. Hip and jack rafters, purlins

conneted to common rafters and the like

Total cost (in Rs.) =

Soakpit & Septic Tank

Description Unit Quantity Rate Amount

Excavation for foundation upto 1.5 m depth including sorting out and

1 stacking of useful materials and disposing off the excavated stuff upto 50 cum 41.00 122.99

Meter lead. (A) Loose or soft soil

Excavation for foundation upto 1.5 m depth including sorting out and

2 stacking of useful materials and disposing off the excavated stuff upto 50 cum 35.00 157.08

Meter lead. (B) Dense or Hard soil

Providing and laying cement concrete 1:3:6 (1-Cement : 3- coarse sand : 6-

3 hand broken stone aggregates 40 mmnominal size) and curing complete cum 6.00 2,968.91

excluding cost of formwork in (A) Foundation and Plinth

Brick work using common burnt clay building bricks having crushing

strength not less than 35kg / Sq. Cm. in ramp, steps and Foundation &

Plinth in cement mortar 1:5 (1 cement : 5 coarse sand) including racking out

joints, curing, scaffolding required if any etc.complete, as directed.

Providing and applying 15 mm thick cement plaster in single coat on brick

work with floating coat of net cement slurry for interior plastering of

pumphouse and outside plastering of sump upto finished even and smooth

in Cement motar 1 : 3 (1 cement : 3 sand) including racking out joint

curing, scaffolding required if any, with necessary cement finishing etc.

complete as directed.

Providing and laying controlled cement concrete M.250 and curing

6 complete including the cost of formwork (Ply wood only) but excluding the cum 5.00 6,237.40

cost of reinforcement for reinforced concrete work in RCC SLAB

Providing TMT Bar FE 500D reinforcement for R.C.C. work including

bending, binding and placing in position complete upto floor two level

8 Manhole Cover C.I. Cover with frame 500mm x 700mm No 3.00 1,140.96

Total cost (in Rs.) =

Tube Well of 250 mm Dia. Depth 300 Rmt

Description Unit Quantity Rate Amount

Drilling 250 mm dia pilot borehole in Alluvial strata by DR Rig. From

mts to 350.00 mts

Conduction electrologing test of 250mm Dia. Borehole incl.carting

Reaming 250mm dia pilot borehole incl.Assembling lowering housing

casing Strainer pipe gravel packing etc.comp. 1) From 250/300mmdia. to

550mm dia. Borehole. rom 0.00 mts to

A) Development of Each water bearing Zones comes/across up to the full

depth Depth more than 186 mt.) by lowering 100 mm. Dia dropline &

mm dia.G.I. Airline for each zone with suitable capacity Air Compressor up

to the availability of Sand free discharge (w/o air comp.charge)

B) Development of above mentioned bore By air compressor 1100 cfm/300

5 PSI Capacity up to 6 hrs minimum until sand Free discharge of the bore Hrs 1.00 34,662.00

which ever is Letter

Manufacture,supply and delivery of ISI marked ERW M.S.Pipes conforming

to 4270/2001 (Min 7.10mm thickness)

Slotting of MS ERW blank pipe of following size having slot size as (including

unloading of blank pipes from truck & reloading slotted pipes into truck). Per

As above having slot size as 6.75 cm x 6.35 cm x 1.59 Slot

8 Supply and laying of gravel having size 4 mm To 6 mm Size. cmt 34.28 2,029.00

Supply and laying of clay ball made from sticky clay Of size 25 mm To

mm & quality Certified by Hydrologist.

Providing & fixing MS bail plug having length 0.45mtr from medium

class pipe as per ISS suitable for 250 mm dia pipe

Providing & fixing Bore plug having 100mm height made from MS plate

with 3 holes at equal distance on circumference for nut bolts type ,locking

arrangement with nuts bolts & locks nuts of std make complete from

5mm thick MS plate for 250mm dia pipe

Providing & fixing clamp made from MS plate with 3 holes on

12 either side with nuts bolts of std make for 250 mm dia pipe (900mm * 100 No 1.00 2,017.73

mm * 16 mm) per pair

Providing & fixing Steel Bent Plate for ERW pipe of 250 mm dia pipe

14 Supply and laying of cement MT 1.50 6,302.00

Cement sealing as recommended by Hydrologist (without cost of cement &

By means of mud pump.

Water analysis charge for chemical Analysis of water from Government

approved Labs (i.e. GJTI) and as directed by Engineer In-Charge

Description Unit Quantity Rate Amount

Providing dust and vermin proof MS cabin having two compartments, one

for panel board and other for energy meter and fuse unit with required

locking arrangement , minimum degree of protection IP 52 as per IS

fabricated from CRCA sheer steel minimum thickness for base frame /

17 channel / gland plates for 3 mm for load bearing members,1.6 mm for No 1.00 23,406.60

ineternal members including cutting, bending, drilling, welding, riveting

with ineternal partitions.The sheet steel enclosure shall be powder coated

as per applicable standard with shade as required with finish thickness of

paint film not less than 80 microns (1) 1.5m*1.25m*0.6m

Providing, supplying, errection, Testing and commissioning of Electric

motor driven borewell submersible pump set confirming to IS 8034 and

motor confirming to IS 9283 working at 3 phase 400 / 440 volt 50 Hz AC

supply & 2900 RPM. with Discharge -240 LPM, Head - 250 mtr, Horse

power -25 HP. Cat

(1 Nos For SITC & 1 Nos for Supply Only) (1W + 1S)

Auto transformer starter suitable for local & remote pump control

application consisting of Auto Transformer (vacuum impregnated, air

cooled having three (3) tappings at 50%, 65% and 80%), incomer

19 MCCB / MPCB, overload relay and contactors as per Type II coordination No 1.00 24,276.00

including digital MFM with RS 485 communication port, analogue

type ammeter with selector switch, run hour meter, required protective

relays & control accessories. A. T. S. from 21 to 30 HP

Providing and supplying, lowering, Layig and Jointing ISI mark G. I. pipes

with Couplings of following class and diameter including all taxes,

20 insurance, transportation, freight charges, octroi, inspection charges, Rmt 230.00 1,031.10

loading, unloading, conveyance to departmental stores, stacking etc.

complete. (IS -1239) (V) 100mm dia

PVC insulated flat / round submersible copper cables PVC insulated flat

submersible cable as per detailed technical specifications of conforming

to IS 694, IEC 60227 /

Total cost (in Rs.) =

Furniture arrangement at different Building

Description Unit Quantity Rate Amount

CONFERENCE TABLE :- Supply & fixing conference table made as described

below : Top thickness 37.0 (18mm + 18mm ply +1mm laminate).Table top

made in various segments (600mm depth). Edge profile waterfall edge

10mm radius on top edge and 5mm at bottom. Partly 6mm thick corian

sheet to be provided as per detail drawing. Vertical panel: Made from

36mm PPB (18+18) having a straight profile with half round edges and clad

with 0.6mm thick post forming. Modesty panel:

1 Made from 18mm thick particle board with 1mm thick laminate,inner side Rmt. 18.00 3,275.00

with balancing veneer.

Wire Carrier: Made from 0.6mm thick CRCA painted.

Carrier cover: Made of 12mm thk. MDF painted all over.

Entire work shall be carried out as per the detailed technical specifications,

drawings and as per the instruction of Engineer-in-Charge. A Supply & fixing

of conference table of 26 seaters (1350mm x 600mm for one module of

two seaters & 675mm x 600mm for one seater ).

Supply & fixing of conference table of 6 seaters (4500mm x 750mm for one

2 module of two seaters & 675mm x 600mm for one seater) Complete with Rmt. 5.00 3,275.00

technical specification.

RECEPTION TABLE WITH PADESTAL Providing & fixing reception table

made as described below: Counter: At 1050 mm height 12mm thick

frosted glass with crystel edge. Glass to be rest on table working top with

25mm dia SS pipe with sturd.Work surface : At 725 mm height made from

37mm th. Ply wood with 1.0mm thick laminate on top & open

edges.Modesty panel: Below work surface 18mm thick ply with

1.0mm thick laminate. Or shera board panel duly finished in

monocoat polish.Verticle box-18mm thick ply with 6mm thick corian

sheet. Entire work shall be carried out as per the detailed

technical specifications, drawings and as per the instruction

of Architect.Padestal in laminated finish. (2 set of drawer box). Pedestal

3 made up of 18 mm thick ply wood 1.0mm thick laminate with PVC lipping Rmt. 17.50 20,282.00

on all edges for top panel, side panel, front skirting and fascia for (top,

middle & file) drawer. Drawer made up of 18 MM thick ply wood with

1.0mm thick laminate with PVC lipping on all edges for back panel,

bottom panel of pedestal bo you NRC of 70% , The cavity of framework

should be inserted with acoustical foam. the end situation or edge

closing at all windows and doors, at skirting level and at ceiling leel

shall be executed with natural wood patta with color matching

melamine polish. the cut Rate is inclusive of telescopic channel of ebco

make or equivalent for supporting drawer. Multi purpose lock of

Vijayan/Godrej make. Key board tray of Ebco make with mouse tray. CPU

trolley: M.S.powder coated trolley. Complete with technical specification.

Description Unit Quantity Rate Amount

CENTER TABLE (0.9 x 0.6m) Providing and supplying modular table as

below specification:Table top 10mm thick float glass with bevelled

4 edge. Top to be rest on 25mm dia. S.S. brush finished leg. Steel frame Nos. 4.00 3,800.00

height is 450mm .Top in Clear Glass of 10mm thk with edge polished of size

: 900 mm x 600 mm x 450 mm Complete with technical specification.

CORNER TABLE Providing & supplying of 750 mm x 750 mm corner table

with table top 19mm ply with 1.0mm thick laminate with solid ghana

5 teak wood leg.dully finished with mono coat polish. complete as per the NOS. 4.00 4,000.00

detailed technical specifications, drawings and as per the instruction of

Architect Complete with technical specification.

STORAGE CABINET Supply & fixing storage cabinets in completely knock

down fittings as per described below specification: Entire body & shutter

(openable or sliding) to be made from 18mm thick pre-laminated particle

board with 2mm thick PVC edge beading matching the laminate.

Adjustable shelves of 400mm depth to be provided with SS rod for file

hanger system as required by Shelves to be made from pre-laminated

particle board. All open edges to be finished with 2mm thick PVC

6 edge beading matching the laminate. Complete with all necessary Smt. 30.00 6,610.00

hardware & fittings such as lock, SS brush finish D type handles, SS auto

hinges, of approved make etc. complete as per the detailed technical

specifications, drawings and as per the instruction of Engineer-in-charge.

Length x height (bottom of false ceiling) to be taken for measurement

purposes. The contractor will have to take the exact dimension between

the walls before supplying the storage units.Complete with technical

specification. A Full height storage.

7 Middle height storage Smt. 30.00 6,693.00

8 Low height storage Smt. 30.00 6,610.00

CHAIRS : HIGH BACK CHAIR - MODEL : CHE - 331 Supply and erecting

synchro tilt mechanism with Any position locking arrangement, Nylon mesh

back for air circulation, 3 steps up armrest position to suit your posture,

Anti topple chrome polished base, Class- 3 gas lift for seat height

adjustment & glass filled nylon castors for smooth movement, 45 dc mould

cushion in seat, waterfall design seat for better leg suport, Unique design of

back with Mechanical lumber support adjustment device, 4 way

adjustable head rest & S shaped back design to support the spine

MEDIUM BACK CHAIR - MODEL : TOR - 5002 Supply and positioning push

back with single back lock system, PP Fix Arms, Seat cushioned & Back in

black Net/Mesh, Powder coating metal base with twin wheel nylon

castors, Gas lift for seat height adjustment

HIGH BACK ITO CHAIR - MODEL: MAR - 1011H SS fix arms, Multiple point

11 locking system with synchro mechanism, Gas lift for seat height Nos. 6.00 7,820.00

adjustment, chrome base with twin wheel nylon castors

Description Unit Quantity Rate Amount

MEDIUM BACK CHAIR - MODEL : Priviya - 7003 Supplying and provided

medium back chai with Cushioned Seat & back, PP outer back cover, PP

12 Fix Arms, Single back lock, Push back mechanism, gas lift for seat height Nos. 6.00 4,140.00

adjustment, five prong PP base

with twin wheel nylon castor-

STAFF CHAIR - MODEL- priviya-7001 Supply & positioning SS fix arms,

Multiple point locking system with synchro mechanism, Gas lift for seat

height adjustment, chrome base

with twin wheel nylon castors

CONFERENCE ROOM CHAIR Suppling & positioning cushioned Seat

Black Mesh back,fix pp handle, Synchro mechanism with single back

14 lock, gas lift for seat height adjustment, five prong Nylon base with Nos. 10.00 4,175.00

twin wheel nylon

FIX VISITORS CHAIR - MODEL : VIT-1002 Suppling and positioning fix chair

with Seat cushion & plastics back with 16 gauge CRC capsule pipe.

SOFA :- Supplying & positioning of sofa as described below: the side

frame assembly is fitted to the two ends of the connecting beam assembly

to form the leg-cum-armrest assembly.The seat rest assembly

consists of a fabricated inner-frame assembly in-situ moulded with

Polyurethane foam.The complete moulded backrest assembly is

covered with a replaceable fabric upholstery cover. The adjustable

16 glide is injection moulded in black Nylon & fitted to the front end of side Nos. 2.00 11,500.00

frame assembly along with ABS moulded adjustable glide base to take

care or unlevelled floor surface etc, complete as per

manufacturers specification, detailed technical specifications,

drawings and as per the EIC/ Architect. Complete with technical

specification and drawing.Supply & positioning three seater Sofa of

2015mm width, 945mm height, depth 920mm & seat height 450mm.

Supply & postioning of synthetic leather fully upholstered sofa made up of

polyester fibre wadding 175 GSM (18 mm), PU foam of 32d, 28d, 23d

in various positions. Expanded PF sheet for load distribution in seats.

Durable rubber webbings of 50 mm & 70 mm. Cotton webbing on

wooden surface to prevent sharp edges. Commercial ply -

17 12 to 15 mm as per design requirement. Pinewood of various Nos. 2.00 25,900.00

thickness and length, duly dried as base structure. All structures are joined

with stapling. etc, complete as per manufacturers specification, detailed

technical specifications, drawings and as per the EIC/ Architect.

Supply & positioning three seater Sofa of 1830mm width, 750mm height,

depth 783mm & seat height 450mm.

Description Unit Quantity Rate Amount

Supply & postioning of synthetic leather fully upholstered sofa made up of

polyester fibre wadding 175 GSM (18 mm), PU foam of 32d, 28d, 23d

in various positions. Expanded PF sheet for load distribution in seats.

Durable rubber webbings of 50 mm & 70 mm. Cotton webbing on

wooden surface to prevent sharp edges. Commercial ply -

18 12 to 15 mm as per design requirement. Pinewood of various nos 2.00 11,500.00

thickness and length, duly dried as base structure. All structures are joined

with stapling. etc, complete as per manufacturers specification, detailed

technical specifications, drawings and as per the EIC/ Architect.

Supply & positioning one seater Sofa of 900mm width, 750mm height,

depth 783mm & seat height 450mm.

M. S PERFORATED BENCH Providing and Supplying sofa as below

specification. Metalic understructure with Metal Arms and Legs with

silver gray finish powder coating with dimention as indicated in the dwg.

PU moulded foamin seat & back of 62 density Under

seat parallel support min. 14 gauge square pipes duly powder coated.

* Glide screw at the bottom for level adjucement. Two seater

ROLLER BLINDS Providing & fixing roller blinds of following specifications:

Eco black out Composition: 100% POLYESTER; Coating: PIGMENTED

20 ACRYLIC; Width: 290CM/250CM/220CM/ 180CM/10CM; Thickness: Smt. 60.00 860.00

0.45MM ±5%; Weight: 330GSM ±5%; Light Fastness: >7 (BLUE WOOL

SCALE), FULLY FADE RESISTANT.

FALSE CEILING :- TILE BASED GRID CEILING Reopen existing tile base

false ceiling & fixed it higher lvl. (approximate 150mm to 800mm )

21 Complete with all materiale.no extra cost to be given for extra Smt. 150.00 269.00

hardware,material etc.Complete with

technical specification.

GYPSUM BOARD CEILING Supply and fixing seamless ceiling with Gypboard

of 12.5 mm thick, fixed by using 25 mm long dry wall screws to the under

side of the suspended G. I. channels grid. comprising of main, intermediate

and perimeter runners, approximate sizes for the same are 80 x 26 x

22 mm @ 450 centre to centre, 45 x 15 x 0.09 mm @ 1200 centre to centre Smt. 150.00 732.00

and 20 x 29 mm respectively. Grid is suspended by G. I. soffit cleat (37 x

x 1.6 mm) using metal expansion fasteners of 12.5 mm dia, 35 mm deep,

6 mm dia bolt. G. I. connecting clips and other accessories to comply

with I. S. 2095 - 1982 and as per manufacturer specifications.

Description Unit Quantity Rate Amount

WALL PANELING :- FOR CONFERENCE Providing and Fixing Laminated MDF

Board / Pine wood Acoustical

Grooved Stats panels with lineal perforation on wall. The panels shall be

fire resistant grade with one site decorative wooden grain design/ or Plain

Laminated and rear side without laminate, with board size of 2400 mm x

140 mm x 16.5 mm with 2 to 3 mm wide and 7 mm deep slats ( grooves) at

16 mm c/c pitch , tongue and groove edges for semless mounting having

density of min 800 kg/m3. the back of the panels are perforated with

mm diameter circular holes at 32 mm c/c which reaches till the 3 x

groove, Panel is to be fixed on 18 framework with screw fixed horizontal/

vertical to cross channel 20 mm at every 600mm c/c with center &

edge bracket in toughe & groove system on the frame work shall be

fixed on wooden ( chill wood) planks which shall be fixed into wall and

which shall create true line and level .The thickness of wooden frame shall

be such that appx 25 mm acoustical foam is to be provided beneath

acoustical panels which gives you NRC of 70% , The cavity of framework

should be inserted with acoustical foam. the end situation or edge closing

at all windows and doors, at skirting level and at ceiling leel shall be

executed with natural wood patta with color matching melamine

polish. the cut out require for fixing swith boards, light points, AC grills etc.

shall be executed as per site condition and as per site engineer's

intstruction without any extra cost.

24 DECORATIVE LIGHT FIXTURES Cendilior light fitting Nos. 12.00 3,000.00

25 LED strip with driver supply Nos. 20.00 300.00

Total cost (in Rs.) =

Electrical and Instrumentation Work

Description Unit Quantity Rate Amount

11 kV Two Pole Structure Assembly:

SITC of 11 kV double pole 9 meter high structure made of 6" X 3"

'I" section girder, 4" X 2" channels, clamps, nuts, bolts, stay wires

including earthing system with following accessories duly connected with

ACSR conductors as per approved drawing & in compliance with

requirement of IEC.

(a) 11 kV, 200 A drop out fuses with Synthetic Resin Bonded Paper (SRBP)

tubes: 1 Set (01 piece per phase).

(b) 11 kV, 400 A G.O.D. switch complete with earth switch,

insulators, operating handle with galvanised pipe, square bar: 1 Set.

(c) 11 kV lightning arrestor with clamps: 3 Nos.

(d) 11 kV Disc Insulators (70KN): 3 Nos.

(e) 11 kV Pin Insulators (5KN): 3 Nos.

(f) 20 mm dia. GI Stay Sets Complete: 2 Set.

Supply of 500 KVA Outdoor type Compact Substation consisting of

Transformer, HT switchgear and LT Switchgear and confirming to IEC-

62227. a) Transformer: 500 KVA Copper wound 11KV

/433 V DYn11, Dry Cast resin type Transformer with tapping range +10 to -

10% @ 2.5% ( with tolerance), class F , with surge restorers, Digital WTI,

IS1171 as per b) HT Compartment: 11KV, 21kA for 3 Sec . 630 A 50 Hz, gas

insulated VCB in SS tank in sheet enclosure having provision for one no.

direct connection of Incoming supply cable upto 300sq mm and one no.

VCB ( Manually charging & closing) in series with LBS between VCB and

Transformer, Self Powered Relay 3 O/C

+1 E/F Relay type CSPR-V5, mechanical ON/OFF indicator, trip coil

Manual Close & Trip PB, live cable indicator, mechanical interlocks, pad

locking facility, SF6 gas manometer, cable boots, 3 nos.

CTs with Ratio -/1A, Cl: 5P10, 2.5 VA for protection c) LV side compartment

no. ACB of 800A, 50kA, 4Pole, Microprocessor based release with

arrangement for bottom cable termination

( 100% for phase & 50% for N, Current density 1A/ sq mm) The

enclosure should be of IK10 type.The Enclosure shall construction shall

be GI of thickness at least 1.6/2mm. The enclosure shall be Powder

Coated. Each compartment will be provided with the door and pad

locking arrangement. The Compartment illumination lamp with door

operated switch shall be provided for each compartment. The

Transformer compartment will have IP-34 ingress protection,

whereas the HT/LT compartment will have IP-54 protection. The

connection between HT and Transformer shall be by 3 runs of single core

aluminium cable and between Transformer to LT switchgear shall

Description Unit Quantity Rate Amount

11 kV (Earthed / Unearthed) Grade Cable- Aluminium Conductor

Supply, laying, testing & commissioning of 6.35 / 11 kV (E) grade,

XLPE insulated, stranded Aluminium conductor, galvanised steel flat strip

/ round wire armoured, extruded PVC type ST2 sheathed, heavy duty cable

3 (to be laid on wall surface with necessary clamps / in existing cable mtr 100.00 1,045.00

trench / cable trays / conduit / pipe sleeves at road crossing or floor

as per site requirement) conforming to IS: 7098 (Part2)

& IEC: 60502 (Part-2) of following sizes: 3 Core x 240 Sqmm

Two Pole Structure to CSS

Cable Terminations / Jointing Kits for 6.6 kV (UE) / 11 kV (E) grade XLPE

Providing & fitting heat shrink cable termination / jointing kits for 6.6 kV

(UE) / 11 kV (E) grade XLPE insulated cable including necessary

4 earth connectivity connection, material & consummables making Nos 4.00 6,763.00

the termination/ joint complete ensuring the joint resistance is within

the permissble limit as per IS, of following types & sizes: Outdoor

Terminations Kit suitable for - 3 Core x 240 Sqmm Two Pole Structure to

Making trench in soft soil of suitable width of 90 cm deep for laying cable

5 or locating the fault all over the run and back filling the same and making Mtr 180.00 46.46

the surface as normal ground.

Covering of cable with second class bricks or cement tiles laid cover the

6 cable crosswise & also on both sides with covering of 7. 5 Cm. layer of sand Mtr 180.00 133.31

above & below cable (16 bricks per meter)

Description Unit Quantity Rate Amount

MEDIUM VOLTAGE PANEL BOARD (PMCC)

SITC of PMCC Panel (50kA) complete in all respects as per SLD /

Specification / IS and including following as minimum:

(1) Three nos. FP 800A Microprocessor MCCB for I/c with Digital

Voltmeter with Voltmeter selector switch, Digital power Factor Meter,

Digital Ammeter with Ammeter selector switch,MFM with RS-485,

R,Y,B,on,off,trip Indicating lamps & ON, E-STOP, Reset Pushbutton, etc,.

(2) Two Nos Bus Coupler FP 800A.

(3) 800 A TPN Main busbars. (main & auxilary busbars size with current

density 0.8A/Sq.mm)

(4) Two nos. 320A FP Microprocessor MCCB feeder for APFC Panel.

(5) One nos. 200 A FP Microprocessor MCCB feeder for PDB-1 Panel

(For Milk Storage Unit Building)

(6) One nos. 63 A FP Microprocessor MCCB feeder for PDB-2 Panel (For

Veterinary Hospital)

(7) One nos. 125 A FP Microprocessor MCCB feeder for PDB-3 Panel (For

(8) One nos. 160 A FP Microprocessor MCCB feeder for PDB-4 Panel (For

Milk Processing Unit)

(9) Twelve nos. 63 A FP Microprocessor MCCB feeder for Panel (For all

Building Supply)

(10) Three no. 63A TPN MCCB feeders (for LDB, PDB & Spare)

(11) One no. Outdoor lighting LDB feeder with 32A TPN 'C' curve MCB with

32A contactor & Time switch.

(12) 2nos. 100A TPN microprocessor MCCB feeder for Borewell Feeder &

(13) 6nos. 800A/1A, Cl.-1 metering CT

(14) 2nos. 800A/1A, Cl.-1 metering CT for APFC Panel

For Distribution Board Building Wise

Providing and erecting Sheet Steel powder coated MCB distribution

board - flush / surface mounted fitted with busbar, neutral link, earth

bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without

MCB to house appropriate nos. of MCBs.(The DBs should be used of

8 same company of MCB to be used) suitable for Nos. 12.00 3,096.28

(B) Three phase incoming and single phase horizontal type outgoing

Per phase isolation type (PPI)

(a) Single door

For 12 Nos for all Building

For Distribution Board Building Wise

Providing and erecting Approved make RCCBs conforming to IS: 12640 and

having sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA

and suitable for operation on 3 phase and neutral 415V,50Hz. having

characteristic of quick action & tripping with all advance feature & do not

incorporate any electronic component for following Max. rating erected as

(ii) 63Amps. FP - Cat. III, Incomer For 12 Nos for all Building

Description Unit Quantity Rate Amount

For Distribution Board Building Wise

Providing & erecting 240 V MCB double pole switch for lighting Load

(B Curve) having 10 KA breaking capacity & confirms to IS : 8828 in

existing box having following capacity

Double pole 6A to 32A Cat.III

For 12 Nos for all Building (4 Nos for each Building)

For Distribution Board Building Wise

Providing & erecting 240 V MCB double pole switch for motor & inductive

load (C Curve) having 10 KA breaking capacity & confirms to IS : 8828 in

existing box having following capacity

Double pole 6A to 32A Cat.III

For 12 Nos for all Building (4 Nos for each Building)

For PDB-1, 2, 3, 4 &

Providing and erecting Sheet Steel powder coated Vertical MCB

distribution board (VTPN) flush

/ surface mounted double door (IP54) fitted with insulated copper busbar,

isolated neutral link, earth bar and DIN rail, confirming to IS 13032 and BS

12 5486-1986,IP-54 suitable for 250 AMP TPN MCCB + RCCB as incomer and Nos 5.00 21,871.53

three phase outgoing as per following .(The DBs should be used of same

company of MCB to be used)

(D)12 way outgoing

For PDB-1, 2, 3 & 4 (Milk Storage Unit, Veterinary Hospital, Milk Parlor &

Milk Processing Unit & Admin Building)

Providing and erecting Approved make Four pole moulded case circuit

breaking capacity ICU of 35 KA. at 415 V. having Normal current

13 rating 200A. with variable Thermal & magnetic release suitable to work Nos 2.00 16,062.28

on A.C.supply 50 c/s. with all internal connections, spreader tinned copper

& complete erected in existing 16 G.M.S.housing ICS=100% of ICU only Cat

For PDB-1 & 4 Incomer (Milk Storage Unit & Milk Processing Unit)

Providing and erecting Approved make Four pole moulded case circuit

breaking capacity ICU of 35 KA. at 415 V. having Normal current

14 rating 125A. with variable Thermal & magnetic release suitable to work Nos 1.00 7,977.28

on A.C.supply 50 c/s. with all internal connections, spreader tinned copper

& complete erected in existing 16 G.M.S.housing ICS=100% of ICU only Cat

For PDB-3 Incomer (Milk Parlor)

Providing and erecting Approved make Four pole moulded case circuit

breaking capacity ICU of 35 KA. at 415 V. having Normal current

15 rating 25A to 100 A. with variable Thermal & magnetic release Nos 2.00 6,113.28

suitable to work on A.C.supply 50 c/s. with all internal connections,

spreader tinned copper & complete erected in existing 16 G.M.S.housing

ICS=100% of ICU only Cat III - 63 A

For PDB-2 & 5 Incomer (Veterinary Hospital)

Description Unit Quantity Rate Amount

For PDB-1, 2, 3, 4 &

Providing & erecting 240 V MCB double pole switch for lighting Load

(B Curve) having 10 KA breaking capacity & confirms to IS : 8828 in

16 existing box having following capacity Nos 20.00 276.13

Double pole 6A to 32A Cat.III - 4 Nos for Each PDB

For PDB-1, 2, 3 & 4 (Milk Storage Unit, Veterinary Hospital, Milk Parlor &

Milk Processing Unit & Admin Building)

For PDB-1, 2, 3, 4 &

Providing & erecting 240 V MCB double pole switch for motor & inductive

load (C Curve) having 10 KA breaking capacity & confirms to IS : 8828 in

17 existing box having following capacity Nos 20.00 297.13

Double pole 6A to 32A Cat.III - 4 Nos for Each PDB

For PDB-1, 2, 3 & 4 (Milk Storage Unit, Veterinary Hospital, Milk Parlor &

Milk Processing Unit & Admin Building)

MEDIUM VOLTAGE CABLES

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand Aluminium conductor for 1.1 KV. to be laid on wall with

18 necessary clamps or in existing trench / pipe of following size of Mtr 540.00 1,387.33

(J) 3 1/2 core 300 Sq.mm ( 150 Sq. mm 1/2 core) (3Run for CSS to

LT Panel and DG set to LT Panel)

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand Aluminium conductor for 1.1 KV. to be laid on wall with

19 necessary clamps or in existing trench / pipe of following size of Mtr 1200.00 187.12

(B) 4 core 25 Sq. mm (20 nos Building)

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable

multistrand / Solid Aluminium conductor for 1.1 KV. to be laid on

20 wall with necessary clamps or in existing trench / pipe of following Mtr 50.00 123.12

4C x 6 sq. mm. A2XFY Cable ( For Outdoor Lighting LDB)

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand Aluminium conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe of following size of

(H) 3 1/2 core 185 Sq. mm ( 95 Sq. mm 1/2 core) (1Run for LT Panel to PDB-

(B) 3 1/2 core 35 Sq. mm ( 16 Sq. mm 1/2 core) (1Run for LT Panel to PDB-2

(D) 3 1/2 core 70 Sq. mm ( 35 Sq. mm 1/2 core) (1Run for LT Panel to PDB-

G) 3 1/2 core 150 Sq. mm ( 70 Sq. mm 1/2 core) (1Run for LT Panel to PDB-

Providing and, fixing heavy duty flange type brass double compression

type cable gland with rubber ring for PVC insulated armoured cable

25 complete with out going tails, insulating tape etc for following size of Nos. 12.00 278.39

(I) 3 & 1/2 core 300 Sq. mm (2Run for CSS to LT Panel and DG set to LT

Description Unit Quantity Rate Amount

Providing and, fixing heavy duty flange type brass double compression

type cable gland with rubber ring for PVC insulated armoured cable

26 complete with out going tails, insulating tape etc for following size of Nos. 40.00 66.11

(B) 4 core 25 Sq. mm (20 nos Building)

Providing and, fixing heavy duty flange type brass double compression

type cable gland with rubber ring for PVC insulated armoured cable

27 complete with out going tails, insulating tape etc for following size of Nos. 2.00 38.11

4C x 6 sq. mm. A2XFY Cable ( For Outdoor Lighting LDB)

28 (G) 3 & 1/2 core 185 Sq. mm (2 for LT Panel to PDB-1) Nos. 2.00 236.30

29 B) 3 & 1/2 core 35/50 Sq. mm (2 each for LT Panel to PDB-2 & 5) Nos. 4.00 75.11

30 (C) 3 & 1/2 core 70 Sq. mm (2 for LT Panel to PDB-3) Nos. 2.00 102.15

31 (F) 3 & 1/2 core 150 Sq. mm (2 for LT Panel to PDB-4) Nos 2.00 189.30

Solder less crimping type Aluminium lugs conforming to IS suitable

for cable of following size evenly crimped with high pressure tool &

connected to switchgear terminals with brass/cadmium plated nut bolts in

an approved manner.

(K) 300 Sq.mm (2Run for CSS to LT Panel and DG set to LT Panel)

Solder less crimping type Aluminium lugs conforming to IS suitable

for cable of following size evenly crimped with high pressure tool &

33 connected to switchgear terminals with brass/cadmium plated nut bolts in Nos. 160.00 15.03

an approved manner.

(B) 4 core 25 Sq. mm (20 nos Building)

Solder less crimping type Aluminium lugs conforming to IS suitable

for cable of following size evenly crimped with high pressure tool &

34 connected to switchgear terminals with brass/cadmium plated nut bolts in Nos. 8.00 6.01

an approved manner.

4C x 6 sq. mm. A2XFY Cable ( For Outdoor Lighting LDB)

35 ( I ) 185 Sq.mm. (for LT Panel to PDB-1) Nos. 8.00 80.15

36 (D) 35/50 Sq.mm. (for LT Panel to PDB-2 & 5) Nos. 16.00 20.03

37 (E) 70 Sq.mm. (for LT Panel to PDB-3) Nos. 8.00 25.06

38 (H) 150 Sq.mm. ( For LT Panel to PDB-4) Nos. 8.00 61.11

Providing and fixing approved make Perforated C type cable tray. Made

from sheet steel. The cable tray should be single or double bended as per

required and as per IS 2062/1079 and shall be coated with hot dip

39 galvanizing as per IS 2629/4759. with max 17.5% perforation with coupler Mtr. 100.00 357.30

plate / Fish plate and GI hardware like nut - bolt and washers etc. erection

with necessary support( included) as per Specification and as per

instruction of engineer in charge.

(2) 100 X 50 X 1.6 mm Thick

Description Unit Quantity Rate Amount

Providing and fixing approved make 'T' Junction for Perforated C type cable

tray. Made from sheet steel. The Junction should be bended as per IS

2062/1079 and shall be coated with hot dip galvanizing as per IS

2629/4759. with max 17.5% perforation with coupler plate / Fish plate and

GI hardware like nut - bolt and washers etc. erected on existing support as

per Specification and as per instruction of engineer in charge of following

(2) 100 X 50 X 1.6 mm Thick

Providing and fixing approved make '90° Elbow' for Perforated C type cable

tray. Made from sheet steel. The Junction should be bended as per IS

2062/1079 and shall be coated with hot dip galvanizing as per IS

43 2629/4759. with coupler plate / Fish plate and GI hardware like nut - bolt Each 5.00 115.13

and washers etc. erected on existing support as per Specification and as

per instruction of engineer in charge.

(2) 100 X 50 X 1.6 mm Thick Thick 90° Elbow

44 (1) 50 X 50 X 1.6 mm Thick Thick 90° Elbow Each 20.00 98.13

Providing and fixing approved make 'Cross over Junction' for Perforated C

type cable tray. Made from sheet steel. The Junction should be bended as

per IS 2062/1079 and shall be coated with hot dip galvanizing as per IS

2629/4759. with max 17.5% perforation with coupler plate / Fish plate and

GI hardware like

nut - bolt and washers etc. erected on existing support as per Specification

and as per instruction of engineer in charge.

(2) 100 X 50 X 1.6 mm Thick Cross Junction

46 (1) 50 X 50 X 1.6 mm Thick Cross Junction Each 20.00 191.13

CHEMICAL EARTHING SYSTEM

Supplying & erecting in earthpit of minimum bore dia. 225mm size

approved make Safe Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of corrosion free hot dipped

G.I.Pipes having Outer pipe dia of 80 mm having 80-200 Micron

galvanising, Inner pipe dia of 40 mm having 200-250 Micron

galvanising, connection terminal dia of 14 mm with constant ohmic

value surrounded by highly conductive compound with high charge

47 dissipation suitable for following type of applications with chamber and Nos 30.00 7,028.82

heavy duty cover.(approved make OEM has to submit test certificate

including value of earth resistane of installation.

[B] For Electrical installation up to 11 KV located in other than

normal soil i.e. Soft Rock, Marshy Soil etc.

-Length of Pipe : 2 mtr

-Back filling Compound :1 no. Bag of 25 Kg.

(Each for body of 2 CSS,LT Panel, 2 APFC Panel & 20 nos PDBs, 2 Nos for DG

[C] For Electrical Installation covering Transformer Neutrals,

Lightning arrester Earthing, A.C.Plant & Sensitive Computer System

(like Automation, SCADA) i.e. independent Earthing located in other

48 than normal soil i.e. Soft Rock, Marshy Soil etc.. Nos 4.00 10,494.73

-Length of Pipe : 3 Mtrs.

-Back filling Compound :2 nos Bags of 25 Kg. (2 Nos Each for neutral of

Description Unit Quantity Rate Amount

Providing and erecting required size HOT deep Galvanised iron strip for

earthing of H.T. , OCB/ ACB/ Transformer LT panel board, Motors etc.

using proper clamp.

(Each for body of LT Panel, 2 APFC Panel & 20 nos PDBs)

Providing and erecting required size Copper strip for earthing of H.T. OCB /

50 ACB/ Transformer, LT panel board, Motors etc. using copper clamp. Kg 90.00 787.34

(Each for body of 2 nos CSS & DG Set)

51 Providing and erecting HOT deep Galvanised iron strip wire 8 to 16 SWG. Kg 20.00 77.17

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green)

both are of .ISI marked

1.1 KV Grade FRLS PVC insulated multi strand copper wires up to 10 mtr

length, in below type of pipe erected with 6A Modular type switch and

hum free EME step type electronic fan regulator mounted and

accessories with earth continuity of following type erected on

PVC / Metallic/Wooden box, single mounting base frame covered

with textured/metallic/white front plate modules erected on / in wall

/ ceiling as per pipe erected. with necessary ceiling rose /

H.D.Connector as directed.

(a) with medium class Rigid PVC pipe and accessories erected flushed on

wall/ceiling complete Cat. III

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi

strand copper wires up to 10 mtr length , in below type of pipe erected

with 6A Modular type switch / bell push & accessories and earth

continuity of following type, erected on PVC / Metallic/Wooden box,

single mounting base frame covered with textured/metallic/white front

plate modules erected on / in wall / ceiling as per pipe erected, with

necessary Lamp holder/ceiling rose / H.D.Connector as directed.

(a) with medium class Rigid PVC pipe and accessories erected flushed on

wall/ceiling complete Cat. III

Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm &

earth wire of 1.5 sq.mm (green) both are of .ISI marked 1.1 KV grade

FRLS PVC insulated multi strand copper wires erected in below type

of pipe with 6A Modular type switches and following type of

accessories erected on PVC / Metallic/Wooden box, single mounting

base frame covered with textured / metallic/white front plate modules

erected on / in wall / ceiling as per pipe erected. with necessary

batten/angle holder or ceiling rose or H.D.Connector as directed.

(a) with medium class Rigid PVC pipe and accessories erected flushed on

wall/ceiling complete Cat. III

Description Unit Quantity Rate Amount

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green)

both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper

wires up to 10 mtr length, in below type of pipe erected complete with

Modular type switch & 5 pin Plug erected on PVC / Metallic/Wooden box

covered with appropriate front plate modules erected on / in wall /

ceiling as per pipe erected with following type of accessories.

[II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu. Wire from mcb

(a) with medium class Rigid PVC pipe and accessories erected flushed

on wall/ceiling complete (For AC)

Providing following type of Modular Type Accessories mounted with PVC /

metallic/Wooden box, single mounting base frame covered with textured /

56 metallic/white front plate , modules erected with necessary connections as Nos 1124.00 143.10

per site situation directed by Engineer In charge.

(1)One No. SP 6 Amp. - Cat.III

57 (2) One No 5 pin plug - Cat.III Nos 281.00 143.10

58 (5) Electronic hum Free steps EME Fan regulator - Cat.III Nos 390.00 377.10

59 (7) Blank Plate Single Nos 1124.00 24.00

60 (8) Computer RJ-45 socket Nos 20.00 152.10

Providing following type of Modular Type Accessories mounted with PVC /

metallic/Wooden box, single mounting base frame covered with textured /

61 metallic/white front plate , modules erected with necessary connections as Nos 15.00 171.10

per site situation directed by Engineer In charge.

(9) 16 Amp. SP one way switch - Cat.III

62 (10) 6/16Amp. Universal socket - Cat.III Nos 15.00 189.10

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI

marked stranded Copper conductor wire in following type of pipe to be

erected concealed in /flushed on wall/ceiling, with

63 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of Mtr 3000.00 78.06

green colour for earth continuity of following size

(A) With medium class Rigid PVC pipe and accessories

(c) 3 wire 1.5 sq. mm

Supplying & erecting approved make low noise decorative exhaust fan

65 having square frame ABS body with inbuilt lowers & square frame. Nos 2.00 1,687.51

200mm with 1350 RPM Cat.II

SITC of CAT6 UTP 23AWG Solid: Per Meter

66 [Approved by Competent Authority i.e. not Below the rank of Executive NOS 400.00 43.05

Description Unit Quantity Rate Amount

CONFERENCE SOUND SYSTEM

Providing & erecting, programming, testing of chairman unit microphone

with flexible stem of 480 mm in length and light ring built in loud

speaker ,two head phone socket ,attractive design

,priority button for chairman microphone,built in volume control for

head phones,chime tone facility to precede chairman priority calls,

microphone on/off button, red indicates for microphone is active,

frequency response- 400Hz to 10kHz, nominal acoustic input -85 dB

SPL [[Approved by Competent Authority i.e. not Below the rank of

Executive Engineer ]

Providing & erecting, programming, testing of Delegate unit

microphone with flexible stem of 480 mm in length and light ring built

in loud speaker ,two head phone socket ,attractive design

,built in volume control for head phones,chime tone facility to

precede chairman priority calls,microphone on/off button,red indicates

for microphone is active,frequency response -400Hz to 10kHz,nominal

acoustic input -85 dB SPL [[Approved by Competent Authority i.e. not

Below the rank of Executive Engineer ]

Supplying & erecting dual channel amplifier ,power handling capacity

of 180 watt ,four micro phone inputs with independent level control

,built in FM tuner,with preset memories,USB drive & SD card for MP3

69 playback ,100v /telephone input with priority and VOX,frequency Ea 1.00 11,023.09

response-80 Hz to 18k Hz Philips / /distortion less than 1% @ rated

power up to 50 units [[Approved by Competent Authority i.e. not

Below the rank of Executive Engineer ]

Supplying and erecting wall mount speaker with rated power of

30 watt/power tapping 30/15/7.5 watt available,opening angle

degree H * 77 degree V ,sound pressure level 88 dB

,frequency response of 70Hz to 20KHz [[Approved by Competent Authority

i.e. not Below the rank

of Executive Engineer ]

SITC of 3LCD Lamp based projector having wxga (1280x800) or better

resolution with minimum white brightness of 3800 lumens and color

brightness of 3800 lumens. The projector should have minimum

1HDMI,1VGA input. Having contrast ratio of 15000:1 or more. the projector

should have auto vertical key stone correction of +/- 30 degree and

Manual Horizontal of +/-30 degree. the projector should have optical

lens, throw ratio 1.30-1.56:1. Zoom Factor of 1.2. Lens focus Manual

having focal length 16.9mm to

20.28mm. projector should have features like AV mute slide, quick corner

and split function and should support wireless functionality with inbuilt

wifi or wifi dongle. [Approved by Competent Authority i.e. not Below

the rank of Executive Engineer ]

Description Unit Quantity Rate Amount

SITC of 100 inch Self Lock MW (7 x 5) Instalock Slow Retraction

72 Screen, Aspect Ratio-4:3 [Approved by Competent Authority i.e. not Ea 1.00 3,776.44

Below the rank of Executive Engineer ]

SITC of 24 x 10/100/1000BASE-T PoE ports

4 x Gigabit RJ45/SFP Combo ports

Advanced L2 switching and security features L2+ Static Routing

73 Optional “standard mode” or “surveillance mode” management user Ea 1.00 31,708.80

interface 193 W PoE budget.

[Approved by Competent Authority i.e. not Below the rank of Executive

PA Sound System

74 SITC of Mixer amplifier, 60W [Approved by Competent Authority i.e. Ea 1.00 14,546.22

not Below the rank of Executive Engineer ]

Supplying and erecting Mixing Console having channels, Audio mixer

with Echo facility for live performance, Auditorium, and stadiums, having

the following features and facilities (approved by Competent Authority,

i.e., not below the rank of Executive Engineer): (a) input Channels:

Each channel has a separate 6.25mm balanced phone jack for mic and line

for balanced and unbalanced signals, (b) Individual gain control for

setting optimum level for minimum noise, (c) BASS, MID, and TREBLE

controls separately for each input channel, (d) ECHO control for each

channel, (e) PAN control for echo channel for left or right output, (f)

AUX Control to control the level of the channel in final mix to AUX

sound output, (g) Channel ON/OFF switch, (h) ECHO Section: ECHO, reverb,

and chorus effect can be added to all input channels by different settings

of Delay, Reverb, and Level control, (i) Tape section, (j) Aux. send and

75 return for sending pre-feeder output of channel for monitoring or Ea 1.00 18,208.24

adding a special effect unit, (k) Mono/Stereo output controls, (l) Master

faders to control over left and right output, (m) Headphone output

for monitoring purpose; Technical specifications: (a) Power Requirement:

AC 220-240V 50 Hz DC 24 Volts, (b) MIC Output Impedance/gain: 2 K

Ohms/62 dB, (c) Line Output Balance/42 dB – 20 K ohms, (d)

Impedance/Gain: 10 Kohms unbalance/42 dB, (e) Frequency Response:

30 Hz-20 KHz L/R Line Output (+0, -1 dB), (f) Equalization Bass: +/-

dB at 100Hz, Mid/Treble: 2 KHz/10 KHz, (g) Outputs: Line Output Low: -

10 dB/-2 dBM, Line Output High: 0 dBM/+17 dBM (775 mV/5.5 V), (h) S/N

ratio Line Output Level: >70 dB (0 dB, 0.775V), and the Console shall

be mounted on a standard rack, with channels of the following

numbers. (A) 14 Channel Audio Mixer with ECHO YAMAHA /SOUND

CRAFT/ MACKIE/ BEHRIGER or Eq.

Supplying, installing, testing, and commissioning (SITC) of a gooseneck

unidirectional condenser microphone with a flexible stem, phantom

powered by an amplifier, equipped with an on/off sliding switch with

76 priority contact, and supplied with a fixed 2-meter (78-inch) cable Ea 1.00 11,937.84

and a lockable DIN connector (approved by Competent Authority, i.e., not

below the rank of Executive

Description Unit Quantity Rate Amount

Supplying, installing, testing, and commissioning (SITC) of a 15W

cabinet loudspeaker in black, designed for high-fidelity music and speech

reproduction, with selectable 8-ohm, 70V, and 100V inputs, housed in a

77 compact yet robust ABS enclosure, supplied with an adjustable Ea 30.00 9,296.45

mounting bracket, and compliant with international installation and

safety regulations (approved by Competent Authority, i.e., not below

the rank of Executive Engineer).

Supplying & erecting XLPE(IS:7098)(I)-88 ISI unarmoured copper cable

1.1 KV grade to be erected as directed of following size. 3 Core

Sqmm approved Make Only for outdoor fitting including cost of

78 mm PVC Pipe and GI Wire for Binding cable pole to pole for outdoor mtr 2250.00 135.06

from Amplifier to Speaker as per instructon given by engineer in

charge.Rate include all kind of

materials and labour work

Supplying, installing, testing, and commissioning (SITC) of a music

source with USB/SD/Tuner featuring MP3 playback from SD card and USB

inputs, an FM tuner with RDS, presets, and digital control, supporting

79 simultaneous operation of the SD/USB player and FM tuner, and Ea 1.00 59,752.28

equipped with separate outputs for the digital source and FM tuner

(approved by Competent Authority, i.e., not below the rank of Executive

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to

0.5 Watt assembled on single MCPCB, with housing used as a heat sink

shall be made of thick sheet Steel conforming to IS:

513/CRCA/aluminium pressure die cast powder coated and high

U.V. & corrosion resistance with diffuser housed in aluminium casted

body with company mark/name

80 160V to 270V,Power Factor more than 0.9, THD < 15 %, CCT 3000 K to Nos 2.00 164.26

Luminaire efficacy> 85 lumens/watt , LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description

have shown ranges of Wattage capacity of LED fittings.The Engineer

incharge may select any wattage capacity between the ranges shown.)

(A) Tube Light with integral driver

i) 5-10 Watts, Surge-2 KV, IP-20, conventional 1 to 2 feet CAT III

81 (iii) 18-20 Watts, Surge - 2KV,IP-20, conventional 4 feet CAT III Nos 6.00 293.26

82 (iv) 22-24 Watts, Surge - 2KV,IP-20, conventional 4 feet CAT III Nos 108.00 370.26

83 (v) 36-40 Watts, Surge-2 KV, IP-20, conventional 4 feet CAT III Nos 231.00 530.26

Description Unit Quantity Rate Amount

LED Light :- Indoor Fixture

Supplying and erecting LED street light / Flood light fittings with High

power White LEDs wattage of 3 Watt and above assembled on single

MCPCB, efficiency more than 130 lm/w and corrosion free High pressure

die cast aluminum housing with smooth finish powder coated and

heat sink extruded aluminium with diffuser and Polycarbonate optics/

lenses, with toughened glass with company mark/name engraved or

embossed 160 to 270 V, Power Factor more than 0.95, THD < 10 %, CCT

84 3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 Nos 68.00 5,545.28

lumens/watt . LED driver efficiency > 85 %.( fittings required LM79

& LM-80 certificates)(NOTE: Below description have shown ranges of

capacity of LED fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.)

B) Flood Light (IP-65), Surge protection -4KV integral and , Light must have

440 VAC line supply with over-voltage protection.

(ii) above 48 to 60 Watts CAT III

1200mm sweep ceiling fan, capacitor type, Providing & erecting

Approved make Ceiling Fan with double ball bearing ISI mark with

Condenser 230 volt A.C.50 Hz 1200 mm sweep complete having 3 blades

aluminium body and blade sets having ornamental design shanks

canopy erected with earthing. [ Make shall be approved by Engineer in

Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe

86 down rod erected duly painted for fan complete with proper insulation mtr 585.00 107.13

without leakage and earthing.

Supplying and erecting LED street light / Flood light fittings with High

power White LEDs wattage of 3 Watt and above assembled on single

MCPCB, efficiency more than 130 lm/w and corrosion free High pressure

die cast aluminum housing with smooth finish powder coated and

heat sink extruded aluminium with diffuser and Polycarbonate optics/

lenses, with toughened glass with company mark/name engraved or

embossed 160 to 270 V,Power Factor more than 0.95, THD < 10 %, CCT

3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy>

87 lumens/watt . LED driver efficiency > 85 %.( fittings required LM-79 & LM- Nos. 8.00 4,772.85

80 certificates)(NOTE: Below description have shown ranges of Wattage

capacity of LED fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.)

(C) Post Top Lantern LED fitting comprises of finish cast aluminum spigot

and spun aluminum canopy fixed with opal polycarbonate, pipe

arrangement for vertical mounting driver and accessories wired upto

terminal block. IP

(i)30- 40W - Cat-lll

Description Unit Quantity Rate Amount

Supplying and erecting approved make Octagonal pole made from HR

sheet steel. The pole should be made as per IS. and shall be coated with

hot dip galvanizing as per IS 2629/2633/4759, suitable suspend local wind

speed with integral Junction box consist of terminal plate of min 6mm

Hylam sheet, standard profile 35mmX7.5mm Din-Rail for MCB Mounting,

88 stud type terminal and arrangement for cable termination to be Nos 8.00 4,198.80

erected With Suitable foundation (Included) as per details given by

manufacturer considering site requirement.

(A) 3 Mtr. Long 70 mm Top X 130 mm bottom dia.3 mm thickness with

200mmX200mmX12mm base plate, 4-M16 Bolts and 450mm long J-

Bolt.Approx weight 29 kg

providing and erecting Miniature circuit breaker single pole 6A to 25A

suitable to operate on 240 V A.C. system and having breaking capacity

KA to be erected in existing box. confirming to IS 8828/1996 with ISI Mark

single pole 6A to 25A Cat.III

Providing and erecting Inverter based approved make split air-

conditioning unit consisting of condensing unit with variable speed

fan motor, inverter type hermetically sealed rotary compressor with

accessories etc. duly connected separately erected evaporating unit and

blower motor with its accessories by means of extra supplied proper

insulated copper tubing,drain PVC pipes suitable for ( cost includes Eco

Friendly green gas charging and 15A plug top & Remote Control & MS

Stand) with necessary core cutting.

2)For 4/5 Star Rating of current year

(C) for 1.7 to 2 ton capacity

91 (A) for 0.8 to 1.0 ton capacity- Premium Cat. Nos 3.00 36,849.12

Providing and erecting water cooler having storage capacity 80Ltr. &

cooling capacity 40 Ltr.per hour @ an ambient temp of 45˚ C. The

outlet temp. of the water should drop by 15˚ C within a hour, The

92 water cooler should be comprising of hermetically sealed compressor, Nos 1.00 40,935.55

fan motor, condensing unit, water tank surrounded by evaporating coil,

thermostats, relay etc. complete with necessary inlet & outlet connection.

The body of water cooler will be made from Stainless Steel. ◦

Supplying & erecting reverse osmosis (RO) water purification system with

M.S. powder coated pedestal frame, prefilter housing carbon filter suitable

buster DC pump, auto low & high pressure switches with following size of

LPH capacity & erected as directed

[D] 100 LPH with 1 phase / 3 phase Raw water pump of 500LPH @

93 2.5kg/cm2 - (1N0 - Kirloskar Nos 1.00 64,416.48

/CRI/Lubi), Dual media filter 10"x54" - (1 No), Micron cartridge filter

20" x 2.5" ( 1No), High pressure pump 500LPH @ 10kg/cm2 - (1No -

Shimge /CRI /Lubi), RO Membrane housing with RO membrane of 40*40

- (1No), RO pressure tube 4" x 1E - ( 1No), 0 - 1200LPH Rotameter -(2

Nos), with Recovery Rate 50%.

Description Unit Quantity Rate Amount

SAFETY ACCESSORIES

SITC of following safety accessories complete with necessary

fixing brackets, other accessories and tools etc. as required to

94 complete the job. Nos 10.00 8,586.26

Supply & Erecting carbon dioxide (CO2) fire extinguisher of 6.5kg

capacity with necessary clamps made from 50 x 6 mm M.S. Flat with nut &

bolts grouted in wall complete.

Supplying FIRE bucket round bottom of 9 litres capacity made out of

24 gauge G.I. sheet with extra handle at bottom duly painted white inside

and Red out side with FIRE mark, filled with dry sand and kept on existing

stand provided or hung on wall hook.

Supplying and erecting floor mounting stand for keeping four nos. of FIRE

buckets comprising 1500 mm in length, 900 mm height frame made out

96 of 30mm X30 mm X 4 mm angle iron with cross supports for legs, welded Nos 2.00 933.43

with 4 hooks and duly painted with one coat of red lead and two

coats of approved enamelled silver paint.

Supplying stand first AID box with anticeptic cream, medicine for use on

wounds due burn, crepe bandage, guage bandage, medicated ready to use

97 bandage (Band-aid) adhesive tape for medicinal user, scissors, anticeptic Nos. 4.00 297.00

solution (Savlon or similar) etc. (All above contents shall be of standard

Providing and fixing printed instruction (First Aid) Chart both in English

and Gujarati and duly framed with front glasses, for treatment of person

suffering from electric shock with minimum 50" diagonally size. (1no. For

Supply and laying of 4 mm thickness, Rubber Matting as per as per

LT & APFC etc. Panels)

Providing , erecting , fabricating the M.S. structure as per

requirement on site incorporating proper size of M.S.

100 angles,square,round, flats, bars, channels, sections complete with kg 500.00 77.20

cutting, welding, grinding & finishing duly painted with one coat of red

oxide with erection on site as per direction of engineer in charge

with necessary grouting, cementing, plastering & finishing complete.

Description Unit Quantity Rate Amount

Supply, installation, testing, and commissioning of a high-pressure

misting system for a cattle farm to maintain optimal temperature

and humidity levels, ensuring animal comfort and productivity.

The system shall comprise stainless steel or brass misting nozzles capable

of producing ultra-fine droplets (10–50 microns) for efficient cooling, along

with an industrial-grade, corrosion-resistant high-pressure pump

operating at 70–100 bar. The piping network shall consist of UV-

resistant, high-pressure-rated PE or stainless steel tubing with leak-proof

connectors. The system shall be equipped with an automated control unit,

either timer-based or sensor-based, to optimize water and energy usage.

An inline water filtration system shall be provided to prevent nozzle

clogging and ensure clean misting. The installation shall be carried out

with durable, corrosion-resistant supports and fixtures, ensuring uniform

coverage across the designated cattle housing area. Upon completion, the

system shall undergo thorough testing and commissioning to verify

proper mist dispersion and operational efficiency. The complete misting

system, including all components, installation, and commissioning, shall

be measured as a single set. with all required accessories and as per

instruction of engineer incharge.

Total cost (in Rs.) =

Construction of Various Shed

Description Unit Quantity Rate Amount

Excavation for foundation upto 1.5m depth including sorting out and

1 stacking of useful materials and disposing off the excavated stuff upto Cu.M. 2167.50 268.21

50Meter lead. (C) Hard Murrum

Box Cutting the road surface to proper slope and camber for making a base

2 for road work including removing the excavated stuff and depositing on Cu.M. 1100.35 109.05

the road side slope as directed up to 50 Mt.Lead

Providing and laying cement concrete 1:3:6 (1-Cement : 3-coarse sand : 6-

3 hand broken stone aggregates 40mm nominal size) and curing complete Cu.M. 903.56 2,968.91

excluding cost of formwork in (A) Foundation and Plinth

Providing and laying controlled cement concrete M.200 and curing

4 complete including the cost of formwork and including the cost of Cu.M. 930.52 4,338.96

reinforcement for reinforced concrete work in (A) Foundation & Footing

Providing and laying controlled cement concrete M.200 and curing

5 complete including the cost of formwork and including the cost of Cu.M. 38.43 8,730.44

reinforcement for reinforced concrete work in ( D ) Column

Providing and laying controlled cement concrete M.200 and curing

6 complete including the cost of formwork and including the cost of Cu.M. 241.05 6,696.30

reinforcement for reinforced concrete work in (C) Ground Beam

Filling available excavated earth (excluding rock) in trenches plinth, sides of

foundations etc. in layers not exceeding 20cm. In depth consolidating each

disposited layer by

ramming and watering.

Carring out plinth treatment to post construction / existing structure by

spraying chemical solution for termite control treatment including labour

and material consistment with I.S.I specification. Using Chlordene and

8 Chiorpurfiles 20 EC. As Per 6131_paret-II Consentration Weight one Smt. 4227.42 86.82

percent is recommended i.e one litre 20 EC chemical emulsion with 19 liter

give 1 % concrentration inclusive of one litre chemical emulsion appication

at the rate of 5 Litre chemical / Sqm of surface is recommended as per I.S

Filling in plinth with sand under floors including watering ramming,

consolidating and dressing complete

Brickwork using common burnt clay building bricks having crushing

strength not less than 35kg./Sq.Cm. in Foundation and Plinth in Cement

Mortar 1:6 (1-Cement : 6 -fine sand)

(B) Conventional

Half brick thick honey- comb brick work with common burnt clay building

bricks having crushing strength not less than 35 Kg/Sq.Cm.

(ii) In Cement Mortar 1:5 ( 1Cement :

5 - coarse sand)

Providing TMT Bar FE500D Reinforcement for R.C.C. work including

bending, binding and placing in position complete upto floor two level

Description Unit Quantity Rate Amount

20mm thick sand faced cement plaster on walls upto height 10metres

above ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-

cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-

sand) etc. complete.

Providing and fixing M.S. grills of required pattern to wooden frames of

windows etc. with M.S. flats at required spacings and frame alround,

square or round bars with round headed bolts and nuts or by screws

(A) Plain Grill.

Steel work, welded in built up sections framed work including cutting,

hoisting, fixing in position and applying a priming coat of red lead paint.

(A)In beams and joists, channels angles Tees, flats, with connecting plates

or angle cleats as in main and cross beams. Hip and jack rafters, purlins

conneted to common

rafters and the like

Providing and fixing tiles roofing with manglore tiles including teak reepers

of sizes 50mm x 25mm etc complete as directed by Engineer in charge

Finishing wall with water proofing cement paint of on wall surfaces (Two

coats) to give an approved brand and manufacture and of required shape

even shade after thoroughly brushing the surface to remove all dirt and

remains of loose powered materials.

Wall painting (two coats) with plastic emulsion paint ofapproved brand

and manufacture on undecorated wallsurface to give an even shade

including throughly brushing the surface free from mortar droppings and

other foreign matter and sand papered smooth.

Applying priming coat over new steel and other metel surface after and

including preparing the surface by throughly cleaning, oil,grease, dirt and

other foreign matter and scoured with brushes fine steel wood, scrapers

and sand paper with ready mixed priming paint brushing red lead.

Painting two coats (excluding priming coat) on new steel and other metal

surface with enamel paint, brushing, interior to give an even shade

20 including cleaning the surface an even shade including cleanicn the surface Sqmt 123083.92 92.17

of all dirt, dust and other foreign

Total cost (in Rs.) =

Cow Urine Collection

Description Unit Quantity Rate Amount

Excavation for foundation upto 1.5 m depth including sorting out and

stacking of useful materials and disposing off the excavated stuff upto

(A) Loose or soft soil

Excavation for foundation upto 1.5 m depth including sorting out and

stacking of useful materials and disposing off the excavated stuff upto

lead.(B) Dense or Hard soil

Providing and laying cement concrete 1:3:6 (1- Cement : 3- coarse

3 sand : 6- hand broken stone aggregates 40 mmnominal size) and curing cum 35.00 2,968.91

complete excluding cost of formwork in (A) Foundation and Plinth

C.C. M-20 Nominal Mix (with w.p.chemical)

Providing and cast in situ C.C. in grade M-20 (approx. corresp. to prop.

1:1.5:3)(proportions as per mix design or as per table9 of IS456

in masses by weigh batching) using quartzite trap metal of size 12 mm to

20 mm and or 6 mm to 12 mm including scaffolding centering form

work, needle vibrated consolidation, curing and hydraulic testing

etc. complete (excluding cost of reinforcement) with centering and

shuttering/deshuttering etc. complete up to 6 meter height/depth from

Av. G.L. for all structures with waater proofing compound. Box portion

bottom slab/floor slab/slab with shuttering

5 Box portion Vertical Wall cum 92.06 8,236.30

Providing TMT Bar FE 500D reinforcement for R.C.C. work including

bending, binding and placing in position complete upto floor two level

Filling availabale excavated earth (excluding rock) in trenches plinth, sides

7 of foundations etc. in layers not exceeding 20 cm in depth consolidating cum 322.00 136.92

each depo sited layer by ramming and watering)

Precast Cover for Box Drain (Width-0.6 Mtr)

Providing, Supplying and Fixing RCC M-250 precast cover of 500 mm (L) x

600 mm (W) x 90 mm thick on existing Strom Water drain including cost of

reinforcement steel as per approved design and drawing. The work is

including all kind of labour and materials to completed the work as per

approved design and drawing & instruction of Engineer in charge.

Providing 15 mm. thick cement plaster in single coat on Rough(similar) side