REPAIR / REPLACEMENT OF GI/PPGI SHEET, FLOOR/WALL TILLING, PVC FLOORING AND CERTAIN B/R WORKS OF TECHNICAL AND RESIDENTIAL AREA OF DEAL UNDER GE (I) RND DEHRADUN

Amount

Virified Ceramic tiles 10 mm thick light shade (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed inwhite or colour cement to match including 15 mm thick screed bed in CM 1:6 with and including dismantling floor , hearth or wall tiling including cement mortar bedding (but not backing), removing debrish and rubbish off the premises and stacking serviceable tiles complete all as specified and directed.

Srl item No 1 above but on vertical surfaces such as skirting incl including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles with and including Dismantling floor , hearth or wall tiling including cement mortar bedding (but not backing), removing debrish and rubbish off the premises and stacking serviceable tiles complete all as specified and directed.

M&L for Vitrified ceramic light shade 10 mm thick (square/ rectangular) polished, area of each tile exc 0.18 Sqm but not exceeding 0.36 sqm, as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with and including 15 mm thick screed bed or bedding layer in CM 1:4 and dismantling of existing floor tiling and removing rubbish off the premises complete all as specified and directed.

M&L for Vitrified ceramic jointless tiles Light shade 10 mm thick (square/ rectangular) polished, cut to size as required, as in vertical surfaces such as dado, skirting, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with and including 10 mm thick rendering in cement mortar 1:4 finished rough to receive tiles including dismantling of existing wall tiling and removing rubbish off the premises complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6 with and including Dismantling floor , hearth or wall tiling including cement mortar bedding (but not backing), removing debrish and rubbish off the premises and stacking serviceable tiles complete all as specified and directed.

Srl item No. 5 above but on vertical surfaces such as skirting incl including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles with and including Dismantling floor , hearth or wall tiling including cement mortar bedding (but not backing), removing debrish and rubbish off the premises and stacking serviceable tiles complete all as specified and directed.

M&L for glazed coloured ceramic tiles, first quality (or approved class, colour and design/shade) of 350x 250x 7 mm/ 450X 350X 7mm thick in vertical surfaces, as in dado/skirting etc set & jointed in neat cement slurry & pointed in coloured cement to match with coloured tiles, over and including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles with and including Dismantling floor , hearth or wall tiling including cement mortar bedding (but not backing), removing debrish and rubbish off the premises and stacking serviceable tiles complete all as specified and directed.

M&L for Granite slab of 16 to 18 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite with and incl Demolition of stone slab and tiles laid bedded and pointed in any mortor of any description or thickness in floor complete all as specified and directed.

S&F 35 mm thick Flush shutters, solid core construction, with block board core & plywood face panels, commercial type on both sides complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm wall plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

S&F Factory Made Solid PVC Moulded Door Shutter 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the ront face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing but 2mm thick Moulded Prelam PVC Sheet on the front ace & 2mm Plain colour PVC Sheet on back face complete all as specified and directed.

S&F for framed work such as grills, gratings, etc. With ends of bars shouldered and riveted, or forged into spikes, framed guard bars, barred iron doors ladders, framed balusters, walk ways, railings, framework of water tanks and similar work con-forming to Fe. 290. Gde-E-165 with and including Dismantling wrought iron or mild steel work of any description not otherwise described complete all as specified and directed. Note (ii) :- Work will be carried out upto 6 story in necessary scafolding and safety measures and labour insourance etc.

M & L for preparation of new iron or steel surfaces of any description, over 10cm in width or girth,not applying two coats of synthetic enamel paint over a coat of Red oxide zince primer complete otherwise described complete all as specified and directed.

M & L for preparation of old iron or steel surfaces of any description, over 10cm in width or girth,not applying one coats of synthetic enamel paint complete otherwise described complete all as specified and directed.

S&F 150 mm size aluminium, anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F 125 mm size butt hinges heavy weight cold rolled mild steel complete all as specified and directed.

S&F 300mm length, aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F 150mm size extruded aluminium alloy handles, fabricated type complete all as specified and directed.

S&F 125mm size extruded aluminium alloy handles, fabricated type complete all as specified and directed.

M&L for Preparation of new wooden surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for Preparation of old wooden surfaces over 10 cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed.

S&F powder coating anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F powder coating anodised aluminium door shutters, aluminium section weighing not less then 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc complete all as specified and directed.

S&F powder coating anodised aluminium window and ventilator shutters, side hung type without sash, aluminium sections weighing not less then 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing , anodised aluminium snap, rubber packing , anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150 mm long (1 No), hinges type B-21 100 mm long (2 No) suitable handle (1 No) complete all as specified and directed.

M&L for 5.5 mm thick sheet glass ordinary quality in panes exc 0.50 sqm each fixed with & including rubber gasket in aluminium frame work complete all as specified and directed.

M & L RCC type B-01:2:4 (12.5mm graded stone aggt) for slabs supports on walls with and including Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description in any position not otherwise specifically provided for and removing demolished materials to a distance exceeding 250 Mtr complete all as specified and directed.

M&L for use and waste form work to soffits of suspended slabs such as roof slabs , floor slabs, landings and similar work for fair finished surfaces of concrete complete all as specified and directed.

M&L for mild steel TMT bars 10 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed.

M&L for running welding in reparis thickness of metal to be welded exc 9mm but n exc 20mm complete all as specified and directed.

M&L for 3.20 / 3.30 Lineoleum , plain colorued, laid dry in floors including streching, cutting and fixing and sealed with approved adhesive with and including dismantling existing floor complete all as specified and directed.

M&L for PVC SHEET WALL PANELLING of thickness 5mm solid consisting of panels of desired size stuck on inner frame work of 50mm wide strips of 5mm thick prelam PVC sheet. The panel & strips shall be of 600 kg / cbm density manufactured by an ISO-9000 certified company. The strips should two PVC strips. The PVC strip shall be fixed to the wall using 65mm long M.S screws through the groove in the strip by using PVC fasteners. The distance between two screws shall not be more than 200mm. A groove of 2mm may be left at the joint of two panels for aesthetic looks. The exact size of the panel and correspondingly of the grid may vary depending on the size of the wall. Optionally a U Channel at top, bottom and side edges and strips of 5mm thick PVC sheet of width 75mm feathered at the edges shall be stuck at the places where two panels are joined, using solvent cement complete all as specified and directed ( Note- Including all nesscesary fittings and scafolding for heighted site) complete all as specified and directed.

Taking down chowkats or frame of any description exc 1.5 Sqm each and n.exc 4 Sqm (without taking off shutters from the frames) & remove off the premises complete all as specified and directed.

Taking down chowkats or frame of any description n.exc. 1.5 Sqm each (without taking off shutters from the frames) & remove off the premises complete all as specified and directed.

Taking down shutters of any description and make n. exc. 1 sqm each complete all as specified.

Taking down shutters of any description and make exc. 1 sqm and not exc 2 sqm each complete all as specified and directed.

M&L for taking out old drapery rod and S&F vertical window blinds made up with vertical louvers, manually operated, with dust guard features, operated by wand control system, of shade and design as approved by the Engr-in-Charge incuuding necessary fittings complete all as specified and directed.

Taking down cement or cement lime plaster of any description including racking out joints, hacking for keys , scrubing down with water etc, complete all as specified and directed.

M&L for Rendering 15 mm thick on fair faces of concrete/brick surfaces in cement mortar 1:4 mixed with water proofing compound as per manufacturer's instruction, finished fair and even without using extra cement complete all as specified and directed. Note :- WPC shall be measured and paid for seprately as "supply only" under respective item of sch A/ BOQ.

M&L for Preparation of new plaster surfaces of wall and applying two coats of cement base paint etc complete all as specifed and directed.

M&L complete removal of existing treatment of old surface and washing rubbing down and stoping of distempered and painted surface of wall and applying two coats of cement based paint complete all as specified and directed.

Brick work with sub class 'B' bricks (old size) straight or curved on plan exc 6.00m mean radius built in CM (1:6) including demolition of brick work/stone masonry built in cement mortar complete all as specified and directed.

M & L for 15 mm thick rendering on fair faces of brick work or concrete surfaces with cement mortar 1:6 finished even and smooth (without using extra cement)complete all as specified and directed.

M&L for preparing of new plastered surface on wall and applying two coats of Oil bond distemper over a coat of alkali resitance primer over 3 mm thick wall care putty in two layer on plastered surface complete all as specified and directed.

S&F in repair vitreous china squatting pan Orissa pattern size 580 x 440 mm white with front or back inlet, integral foot rest (excluding flushing cistern and flush pipe) & including CI trap & connecting fitting as required set in plain cement concrete (1:3:6) type C-1 and connecting to flusing cistern and trap & connecting fittings as required and making good to floor, complete all as specified and directed.

S&F in counter top wash hand basin coloured oval type 550x445 mm fixed over granite slab of Appropriate size including brackets, PVC connection waste pipe waste coupling etc complete all as specified and as directed . Note Granite slab will be measured and paid separately under respective item of Sch A/BOQ.

S&F in repair vitreous china wash hand basin (flat back) of size 550x400mm including one number chromium plated waste fittings, 32 mm dia, brass with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed, with & including 32 mm dia PVC waste pipe with connector, MS brackets 2 numbers including cutting for and pinning in ends of brackets complete all as specified and directed.

S&F in repairs PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action type with inlet ball valve and float, handle with & including bracket and PVC flush pipe 32 mm bore complete all as specified and directed

S&F powder coated aluminium sliding window two track with two glass shutters fixing 4.8 mm thick plainglass aluminium powder coated section aluminium cleat, PVC track, bearing, handle locking arangement, rubber beading etc complte fittings as approved. Note Size of aluminium section shall be under :- (i) Two track top and vertical - Jindal main-2010 section No 20829 or equivalent (ii) Two track bottom- Jindal main-2010 section No 20830 or equivalent (iii) Shutter vertical section- Jindal main- 2010 Section 20606 or equivalent (iv) Shutter top and bottom - Jindal Main-2010 Section 20604 or equivalent (v) Shutter vertical middle (interlock) -Jindal Main-2010 section 20605 or equivalent. complete all as specified and directed.

S&Fpowder coated aluminium sliding window three track with two glass shutters fixing 4.8 mm thick plain glass, and one shutter with and including stainless steel wire gauge cloth 0.31 mm nominal dia of wire and width of aperture 1.61 mm using aluminium power coatet sections, aluminium cleat, PVC track, bearing, handle locking arangement, rubber beading etc complte fittings as approved. Note Size of aluminium section shall be under :- (i) Three track top and vertical - Jindal main-2010 section No 20831 or equivalent (ii)Three track bottom- Jindal main-2010 section No 20620 or equivalent (iii) Shutter vertical section- Jindal main- 2010 Section 20738 or equivalent (iv) Shutter top and bottom - Jindal Main-2010 Section 20736 or equivalent (v) Shutter vertical middle (interlock) -Jindal Main-2010 section 20845 or equivalent

M&L for S & F fixed in repairs WC - wall hung Cat Part No-4525 of Prayag and eqvuivalent of Jaguar, CERA) with integrated cistern, seat cover and twin flush system ivory colour, incl seat cover, fixing bolts etc, complete all as specified and directed.

sidh builders

M/S P K ARORA

SHREYA INFRA DEVELOPER & CONSTRUCTION COMPANY

OM TRADERS

JS CONSTRUCTION COMPANY

M/s Arora Sales Corporation

excel electric co