Construction Work of Asphalt Road at Various Location in Bharuch, Dist. Bharuch Under Road Re-Surfacing Grant Year 2023-24 and 2024-25.

NAME OF WORK :- CONSTRUCTION WORK OF ASHPALT ROAD

LOCATION :- AT VARIOUS LOCATION IN BHARUCH, DIST:- BHARUCH

TOTAL AMOUNT PUT TO TENDER

TOTAL AMOUNT PUT TO TENDER

PERCENTAGE RATE TENDER

Sr.No. Schedule Amount

1 Schedule - "B"- 1

2 Schedule - "B"- 2

3 Schedule - "B"- 3

4 Schedule - "B"- 4

Total Amount Rs.

Total Amount Rs.

I/We am/are willing to carry out the work @ ________% Above / Below_____________Percentage

(should be writen in figures and words) of the Estimated rates mentioned above amount of my / our Tender

works out as under.

Estimated Amount Estimated Amount

Put to Tender Rs. 1,42,43,556=00 Put to Tender Rs. 1,42,43,556=00

Add % Rs. Deduct %Rs.

Total Rs. Total Rs.

(In Words (In Words

Stamp with Signature of Contractor

Consulting Engineer Municipal Engineer Chief Officer

" DESIGN POINT " Bharuch Nagarpalika Bharuch Nagarpalika

Amreli Bharuch Bharuch

BHARUCH NAGARPALIKA - BHARUCH

SCHEME: ROAD RE-SURFACING GRANT YEAR 2023-24 AND 2024-25

NAME OF WORK :- CONSTRUCTION WORK OF ASHPALT ROAD

LOCATION :- AT RAILWAY STATION TO KASAK GALNALA AT BHARUCH

"SCHEDULE: B-1"

PERCENTAGE RATE TENDER

Item No. & Description Qty. Rate Per Amount

Preparing surface by Brushing with wire brushes for removing

caked mud etc. sweeping with brooms and finally fanning the

cleaned surface with gunney bags to remove all loose dirt

etc.(ii) Black top surface.

Providing & Laying 50mm thick compacted B.M. for leveling

course with B.T. aggregates at the rate 0.66 Cumt/MT. as per

MORT&H gradation and Emulsion RS - 1 for tack coat at the

rate of 2.50 kg. per 10 Sqmt. Road surface by mechanical

sprayer and for mixing aggregates with asphalt 60/70 (VG30)

at the rate of 3.4% i.e. 34kg/MT. of total mix including heating

& mixing in drum mix plant, spreading the same by paver

finisher and consolidation with vibrator roller including the

cost of fuel, hire charges, wood, kerosene, labour charges

etc. by using contraxtor's own machineries and plant etc.

Providing and laying 25mm compacted thick Semidence

Bitumenous concrete using crushed stone B.T. chips as per

required MORT&H gradation and using Bitumen Grade

60/70 (VG30) for mixing at 5.00% by total weight of mix hot

laid process using drum mix plant including heating the 119.30 3380.47 M.T.

asphalt and aggregates by continuous drum mix plant,

transporting the mix and spreading the same by paver

finisher and consolidation with vibratory roller including fuel,

oil, libricant, labour charges etc. complete.

Providing and applying asphalt painting on B.T.surface with

mechanical sprayer using bitumens 60/70 (VG-30) at the rate

of 5.00 Kg/10 sqmt and spreading stone dust on painting

surface at the 0.03 Cumt/10 Sqmt.and rolling with smooth

wheeled and pneumatic roller and brushing etc.complete.

HOTMIX PATCH :-

Hot Mix Patch :- Supplying & Laying of bitument sealcoat with

0.18 cum/10sqmt & stone chips 6mm size & binder content at

the rate of 4.50% by weight of total mix hot laid process

including heating the asphalt & aggregate by continuous 800.00 3159.28 M.T.

batching drummix plant, including providing necessary fire

wood, consolidation with lubricants, oil, kerosene, labour

charges, hire charges of riqulred plant & machinery at plant

site etc complete. (Using D.M. Plant)

Item No. & Description Qty. Rate Per Amount

Road marking with hot applied thermoplastic paints with

reflectorising glass beads on bitumin surface providing and

laying a hot applied thermoplastic compound 2.5 mm thick

including reflectorising glass beads @ 250gms per sqm area,

thickness of 2.5mm is excluding of surface applied glass

beds as per IRC:35-2015. The finished surface to be level,

uniform and free from streaks and holes. zebra patta /bump

patta lane/center line/ edge line/cut patta. The white color

marking should provide liminance coefficinet on cemend road

shalll be min 130 mcd/m2/lux and Asphalt road shall be min

100 mcd/m2/lux during the service life during the day time.

The marking should meet the performance criteria for night

time reflectivity, wet reflectivity and skid resistance as

mentioned in the section-15 of IRC 35-2015. Warranty for the

Retro reflectivity should be two years.

Supplying and fixing cat eye (Stimsonite) made out from

Acrilo beautile sterine injuction high compressed molding with

reflector made of MMC (prismatic type of size 12cm x 6cm x 57.00 375.72 No.

2.5cm) provided with bituminous adhesive 100g. with each

unit for fixing. (High Intensity grade) (It.No.26163)

supplying and applying rumbble srip road marking with hot

applied thermoplastic paints with reflactorising glass beads

on bitumen surface providing and laying a hot applied

thermoplastic compoumd 8mm thick including reflactorising

glass beads @250gms per sqm area , thickness of 8mm is

excluding of surface applied glass beads as per IRC-35 :

2015. The finished surface to be level,uniform and free from

streaks and holes.

Tracing of old manhole All Type 5.00 1214.02 No.

Modification of Existing House Connection Chambers,

Risening up to 23cm. average of 0.23m wide C.C. Copping

1:3:6 with Curing and Dismentaling existing Chamber's

Precast cement frame and Cover and also fitting the copping

work as directed as required and also refitting of existing

house connection chamber's coller and cover as required.

Item No. & Description Qty. Rate Per Amount

RCC precast M.H. Frame & Cover

RCC precast M.H. Frame & Cover Manufacture, supply &

Delivery at store or at site of work precast RCC M.200 Frame

& cover suitable to drainage M.H. and as per type design &

Drawing including cost of reinforcement M.S. Angles or Flate,

curring mold work etc.

Frame suitable for 50cm opening of MH 5.00 1132.21 No.

Cover suitable for 50cm opening of MH 5.00 1184.73 No.

House Connection

Frame 5.00 821.13 No.

Cover 5.00 929.20 No.

Total Amount Rs..

Total Amount Rs..

Consl. Engineer Municipal Engineer Chief Officer

" DESIGN POINT " Bharuch Nagarpalika Bharuch Nagarpalika

Amreli Bharuch Bharuch

BHARUCH NAGARPALIKA - BHARUCH

SCHEME: ROAD RE-SURFACING GRANT YEAR 2023-24 AND 2024-25

NAME OF WORK :- CONSTRUCTION WORK OF ASHPALT ROAD

LOCATION :- AT RAILWAY GODI TO SHINDHU NAGAR AT BHARUCH

"SCHEDULE: B-2"

PERCENTAGE RATE TENDER

Item No. & Description Qty. Rate Per Amount

Preparing surface by Brushing with wire brushes for removing

caked mud etc. sweeping with brooms and finally fanning the

cleaned surface with gunney bags to remove all loose dirt

etc.(ii) Black top surface.

Granular Sub-Base with Graded Material

Construction of granular sub-base by providing coarse

graded machine crushed B.T. material satisfying MOST

specification of grading I (B.T. stone aggregate 53 mm to

), mixing in a mechanical mix plant at OMC, carriage of mixed

Material to work site, spreading in uniform layers with motor

grader on prepared surface and compacting with vibratory

power roller to achieve the desired density, complete as per

Providing & Laying 50mm thick compacted B.M. for leveling

course with B.T. aggregates at the rate 0.66 Cumt/MT. as per

MORT&H gradation and Emulsion RS - 1 for tack coat at the

rate of 2.50 kg. per 10 Sqmt. Road surface by mechanical

sprayer and for mixing aggregates with asphalt 60/70 (VG30)

at the rate of 3.4% i.e. 34kg/MT. of total mix including heating 708.10 2732.05 M.T.

& mixing in drum mix plant, spreading the same by paver

finisher and consolidation with vibrator roller including the

cost of fuel, hire charges, wood, kerosene, labour charges

etc. by using contraxtor's own machineries and plant etc.

Providing and laying 25mm compacted thick Semidence

Bitumenous concrete using crushed stone B.T. chips as per

required MORT&H gradation and using Bitumen Grade 60/70

(VG30) for mixing at 5.00% by total weight of mix hot laid

process using drum mix plant including heating the asphalt 370.10 3380.47 M.T.

and aggregates by continuous drum mix plant, transporting

the mix and spreading the same by paver finisher and

consolidation with vibratory roller including fuel, oil, libricant,

labour charges etc. complete.

Providing and applying asphalt painting on B.T.surface with

mechanical sprayer using bitumens 60/70 (VG-30) at the rate

of 5.00 Kg/10 sqmt and spreading stone dust on painting

surface at the 0.03 Cumt/10 Sqmt.and rolling with smooth

wheeled and pneumatic roller and brushing etc.complete.

Item No. & Description Qty. Rate Per Amount

Road marking with hot applied thermoplastic paints with

reflectorising glass beads on bitumin surface providing and

laying a hot applied thermoplastic compound 2.5 mm thick

including reflectorising glass beads @ 250gms per sqm area,

thickness of 2.5mm is excluding of surface applied glass beds

as per IRC:35-2015. The finished surface to be level, uniform

and free from streaks and holes. zebra patta /bump patta

lane/center line/ edge line/cut patta. The white color marking

should provide liminance coefficinet on cemend road shalll be

min 130 mcd/m2/lux and Asphalt road shall be min

mcd/m2/lux during the service life during the day time. The

marking should meet the performance criteria for night time

reflectivity, wet reflectivity and skid resistance as mentioned

in the section-15 of IRC 35-2015. Warranty for the Retro

reflectivity should be two years.

Supplying and fixing cat eye (Stimsonite) made out from

Acrilo beautile sterine injuction high compressed molding with

reflector made of MMC (prismatic type of size 12cm x 6cm x 299.00 375.72 No.

2.5cm) provided with bituminous adhesive 100g. with each

unit for fixing. (High Intensity grade)

supplying and applying rumbble srip road marking with hot

applied thermoplastic paints with reflactorising glass beads

on bitumen surface providing and laying a hot applied

thermoplastic compoumd 8mm thick including reflactorising

glass beads @250gms per sqm area , thickness of 8mm is

excluding of surface applied glass beads as per IRC-35 :

2015. The finished surface to be level,uniform and free from

streaks and holes.

Providing & Fixing of Speed Brecker 1 Mtr. In 4 Nos. 56.00 1068.58 Rmt.

Tracing of old manhole All Type 20.00 1214.02 No.

Modification of Existing House Connection Chambers,

Risening up to 23cm. average of 0.23m wide C.C. Copping

1:3:6 with Curing and Dismentaling existing Chamber's

Precast cement frame and Cover and also fitting the copping 40.00 865.57 No.

work as directed as required and also refitting of existing

house connection chamber's coller and cover as required.

Item No. & Description Qty. Rate Per Amount

RCC precast M.H. Frame & Cover

RCC precast M.H. Frame & Cover Manufacture, supply &

Delivery at store or at site of work precast RCC M.200 Frame

& cover suitable to drainage M.H. and as per type design &

Drawing including cost of reinforcement M.S. Angles or Flate,

curring mold work etc.

Frame suitable for 50cm opening of MH 10.00 1132.21 No.

Cover suitable for 50cm opening of MH 10.00 1184.73 No.

House Connection

Frame 14.00 821.13 No.

Cover 14.00 929.20 No.

Total Amount Rs..

Total Amount Rs..

Consl. Engineer Municipal Engineer Chief Officer

" DESIGN POINT " Bharuch Nagarpalika Bharuch Nagarpalika

Amreli Bharuch Bharuch

BHARUCH NAGARPALIKA - BHARUCH

SCHEME: ROAD RE-SURFACING GRANT YEAR 2023-24 AND 2024-25

NAME OF WORK :- CONSTRUCTION WORK OF ASHPALT ROAD

LOCATION :- AT VARIOUS ROAD IN MUKTI NAGAR AREA AT BHARUCH

"SCHEDULE: B-3"

PERCENTAGE RATE TENDER

Item No. & Description Qty. Rate Per Amount

Preparing surface by Brushing with wire brushes for removing

caked mud etc. sweeping with brooms and finally fanning the

cleaned surface with gunney bags to remove all loose dirt

etc.(ii) Black top surface.

Providing & Laying 50mm thick compacted B.M. for leveling

course with B.T. aggregates at the rate 0.66 Cumt/MT. as per

MORT&H gradation and Emulsion RS - 1 for tack coat at the

rate of 2.50 kg. per 10 Sqmt. Road surface by mechanical

sprayer and for mixing aggregates with asphalt 60/70 (VG30)

at the rate of 3.4% i.e. 34kg/MT. of total mix including heating 551.00 2732.05 M.T.

& mixing in drum mix plant, spreading the same by paver

finisher and consolidation with vibrator roller including the

cost of fuel, hire charges, wood, kerosene, labour charges

etc. by using contraxtor's own machineries and plant etc.

Providing and laying 25mm compacted thick Semidence

Bitumenous concrete using crushed stone B.T. chips as per

required MORT&H gradation and using Bitumen Grade 60/70

(VG30) for mixing at 5.00% by total weight of mix hot laid

process using drum mix plant including heating the asphalt 288.10 3380.47 M.T.

and aggregates by continuous drum mix plant, transporting

the mix and spreading the same by paver finisher and

consolidation with vibratory roller including fuel, oil, libricant,

labour charges etc. complete.

Providing and applying asphalt painting on B.T.surface with

mechanical sprayer using bitumens 60/70 (VG-30) at the rate

of 5.00 Kg/10 sqmt and spreading stone dust on painting

surface at the 0.03 Cumt/10 Sqmt.and rolling with smooth

wheeled and pneumatic roller and brushing etc.complete.

Road marking with hot applied thermoplastic paints with

reflectorising glass beads on bitumin surface providing and

laying a hot applied thermoplastic compound 2.5 mm thick

including reflectorising glass beads @ 250gms per sqm area,

thickness of 2.5mm is excluding of surface applied glass beds

as per IRC:35-2015. The finished surface to be level, uniform

and free from streaks and holes. zebra patta /bump patta

lane/center line/ edge line/cut patta. The white color marking

should provide liminance coefficinet on cemend road shalll be

min 130 mcd/m2/lux and Asphalt road shall be min

mcd/m2/lux during the service life during the day time. The

marking should meet the performance criteria for night time

reflectivity, wet reflectivity and skid resistance as mentioned

in the section-15 of IRC 35-2015. Warranty for the Retro

reflectivity should be two years.

Item No. & Description Qty. Rate Per Amount

Supplying and fixing cat eye (Stimsonite) made out from

Acrilo beautile sterine injuction high compressed molding with

reflector made of MMC (prismatic type of size 12cm x 6cm x 395.00 375.72 No.

2.5cm) provided with bituminous adhesive 100g. with each

unit for fixing. (High Intensity grade)

supplying and applying rumbble srip road marking with hot

applied thermoplastic paints with reflactorising glass beads

on bitumen surface providing and laying a hot applied

thermoplastic compoumd 8mm thick including reflactorising

glass beads @250gms per sqm area , thickness of 8mm is

excluding of surface applied glass beads as per IRC-35 :

2015. The finished surface to be level,uniform and free from

streaks and holes.

Providing & Fixing of Speed Brecker 1 Mtr. In 4 Nos. 160.00 1068.58 Rmt.

Tracing of old manhole All Type 48.00 1214.02 No.

Modification of Existing House Connection Chambers,

Risening up to 23cm. average of 0.23m wide C.C. Copping

1:3:6 with Curing and Dismentaling existing Chamber's

Precast cement frame and Cover and also fitting the copping 96.00 865.57 No.

work as directed as required and also refitting of existing

house connection chamber's coller and cover as required.

RCC precast M.H. Frame & Cover

RCC precast M.H. Frame & Cover Manufacture, supply &

Delivery at store or at site of work precast RCC M.200 Frame

& cover suitable to drainage M.H. and as per type design &

Drawing including cost of reinforcement M.S. Angles or Flate,

curring mold work etc.

Frame suitable for 50cm opening of MH 24.00 1132.21 No.

Cover suitable for 50cm opening of MH 24.00 1184.73 No.

House Connection

Frame 32.00 821.13 No.

Cover 32.00 929.20 No.

Total Amount Rs..

Total Amount Rs..

Consl. Engineer Municipal Engineer Chief Officer

" DESIGN POINT " Bharuch Nagarpalika Bharuch Nagarpalika

Amreli Bharuch Bharuch

BHARUCH NAGARPALIKA - BHARUCH

SCHEME: ROAD RE-SURFACING GRANT YEAR 2023-24 AND 2024-25

NAME OF WORK :- CONSTRUCTION WORK OF ASHPALT ROAD

LOCATION :- AT SARDAR PATEL AREA AND VARIOUS LOCATION AT BHARUCH

"SCHEDULE: B-4"

PERCENTAGE RATE TENDER

Item No. & Description Qty. Rate Per Amount

Preparing surface by Brushing with wire brushes for removing

caked mud etc. sweeping with brooms and finally fanning the

cleaned surface with gunney bags to remove all loose dirt

etc.(ii) Black top surface.

Providing & Laying 50mm thick compacted B.M. for leveling

course with B.T. aggregates at the rate 0.66 Cumt/MT. as per

MORT&H gradation and Emulsion RS - 1 for tack coat at the

rate of 2.50 kg. per 10 Sqmt. Road surface by mechanical

sprayer and for mixing aggregates with asphalt 60/70 (VG30)

at the rate of 3.4% i.e. 34kg/MT. of total mix including heating 277.20 2732.05 M.T.

& mixing in drum mix plant, spreading the same by paver

finisher and consolidation with vibrator roller including the

cost of fuel, hire charges, wood, kerosene, labour charges

etc. by using contraxtor's own machineries and plant etc.

Providing and laying 25mm compacted thick Semidence

Bitumenous concrete using crushed stone B.T. chips as per

required MORT&H gradation and using Bitumen Grade 60/70

(VG30) for mixing at 5.00% by total weight of mix hot laid

process using drum mix plant including heating the asphalt 144.90 3380.47 M.T.

and aggregates by continuous drum mix plant, transporting

the mix and spreading the same by paver finisher and

consolidation with vibratory roller including fuel, oil, libricant,

labour charges etc. complete.

Providing and applying asphalt painting on B.T.surface with

mechanical sprayer using bitumens 60/70 (VG-30) at the rate

of 5.00 Kg/10 sqmt and spreading stone dust on painting

surface at the 0.03 Cumt/10 Sqmt.and rolling with smooth

wheeled and pneumatic roller and brushing etc.complete.

Road marking with hot applied thermoplastic paints with

reflectorising glass beads on bitumin surface providing and

laying a hot applied thermoplastic compound 2.5 mm thick

including reflectorising glass beads @ 250gms per sqm area,

thickness of 2.5mm is excluding of surface applied glass beds

as per IRC:35-2015. The finished surface to be level, uniform

and free from streaks and holes. zebra patta /bump patta

lane/center line/ edge line/cut patta. The white color marking

should provide liminance coefficinet on cemend road shalll be

min 130 mcd/m2/lux and Asphalt road shall be min

mcd/m2/lux during the service life during the day time. The

marking should meet the performance criteria for night time

reflectivity, wet reflectivity and skid resistance as mentioned

in the section-15 of IRC 35-2015. Warranty for the Retro

reflectivity should be two years.

Item No. & Description Qty. Rate Per Amount

Supplying and fixing cat eye (Stimsonite) made out from

Acrilo beautile sterine injuction high compressed molding with

reflector made of MMC (prismatic type of size 12cm x 6cm x 674.00 375.72 No.

2.5cm) provided with bituminous adhesive 100g. with each

unit for fixing. (High Intensity grade)

supplying and applying rumbble srip road marking with hot

applied thermoplastic paints with reflactorising glass beads

on bitumen surface providing and laying a hot applied

thermoplastic compoumd 8mm thick including reflactorising

glass beads @250gms per sqm area , thickness of 8mm is

excluding of surface applied glass beads as per IRC-35 :

2015. The finished surface to be level,uniform and free from

streaks and holes.

Providing & Fixing of Speed Brecker 1 Mtr. In 4 Nos. 320.00 1068.58 Rmt.

Tracing of old manhole All Type 42.00 1214.02 No.

Modification of Existing House Connection Chambers,

Risening up to 23cm. average of 0.23m wide C.C. Copping

1:3:6 with Curing and Dismentaling existing Chamber's

Precast cement frame and Cover and also fitting the copping 84.00 865.57 No.

work as directed as required and also refitting of existing

house connection chamber's coller and cover as required.

RCC precast M.H. Frame & Cover

RCC precast M.H. Frame & Cover Manufacture, supply &

Delivery at store or at site of work precast RCC M.200 Frame

& cover suitable to drainage M.H. and as per type design &

Drawing including cost of reinforcement M.S. Angles or Flate,

curring mold work etc

Frame suitable for 50cm opening of MH 21.00 1132.21 No.

Cover suitable for 50cm opening of MH 21.00 1184.73 No.

House Connection

Frame 28.00 821.13 No.

Cover 28.00 929.20 No.

Total Amount Rs..

Total Amount Rs..

Consl. Engineer Municipal Engineer Chief Officer

" DESIGN POINT " Bharuch Nagarpalika Bharuch Nagarpalika

Amreli Bharuch Bharuch