BID DOCUMENTS FOR PROPOSED MACHINERY WITH ELECTRIFICATION WORK IN DIFFERENT HEAD WORK IN BOTAD, DIST.: BOTAD (4th attempt)

BOTAD NAGARPALIKA-BOTAD

DISTRICT :- BOTAD

BID DOCUMENTS FOR PROPOSED MACHINERY WITH ELECTRIFICATION WORK IN DIFFERENT HEAD WORK IN BOTAD, DIST.: BOTAD.

SR.NO. NAME OF WORK AMOUNT IN RS. AS PER ESTIMATE DIFFERENCE

SCHEDULE B - 01 SITC OF MACHINERY OF DIFFERENT HEAD WORKS OF BOTAD NAGARPALIKA 5131091.00 2756201 2374890.00

SCHEDULE B - 02 SITC OF ELECTRICAL WORK IN DIFFERENT HEAD WORKS IN BOTAD HEAD WORKS 1570347.00 1136275 434072.00

Say Amount Rs.:- 7912995.000

I/We am/are willing to carry out the work @ _______% Above / Below___________Percentage (should be writen in figures and words) of the Estimated rates mentioned above amount of my / our Tender works out as under.

Estimated Amount Estimated Amount

Put to Tender Rs. Put to Tender Rs. TENDER COST 7912995.00

Add % Rs. Deduct %Rs. EMD 79129.95

Total Rs. Total Rs. TENDER FEE 1770

(In Words (In Words CLASS E1

BID VALIDITY 180/120

TIME LIMIT 06 MONTHS

SOLVENCY 1582599

Muncipal Engineer Chief Officer TURN OVER 3956497.5

Botad Nagarpalika Botad Nagarpalika

Botad Botad 80% - ONE WORK 6330396

40% 0 THREE WORK 3165198

BOTAD NAGARPALIKA-BOTAD

DISTRICT :- BOTAD

BID DOCUMENTS FOR PROPOSED MACHINERY WITH ELECTRIFICATION WORK IN DIFFERENT HEAD WORK IN BOTAD, DIST.: BOTAD.

SITC OF MACHINERY OF DIFFERENT HEAD WORKS OF BOTAD NAGARPALIKA

SCHEDULE B - 01

SR.NO. ITEM DESCRIPTION QTY UNIT FINAL RATE AMOUNT IN RS.

1 Supply, installation, testing & commissioning of horizontal split casing centrifugal pump motor set of specified duty parameters & guaranteed efficiency of following MOC with specified capacity, horizontal foot mounted TEFC squirrel cage induction motor (with minimum IE-3 efficiency class), working on three phase AC supply with 50 Hz ± 3%, 415 V ± 10%, rated speed 1450 RPM along with fabricated MS base frame, coupling, coupling guard, foundation bolts etc. as per relevant IS. M.O.C.: Impeller & Wearing Rings: CF8M, Casing: Cast Steel WCB , Shaft: SS 410, Shaft Sleeve: SS 410, Mechanical Seal (Above 30 kW), Base For 62 LPS X 27 Mtrs.Head,

1.1 Hifli Head Works - 40 HP - 30 kw ( 1W+1S) 60.00 KW 9118.00 547080.00

1.2 Gadhda Road Ghanshyam Nagar Head Works 40 HP - 30 kw ( 1W+1S) 60.00 KW 9118.00 547080.00

1.3 Vihavav Head Works -40 HP - 30 kw ( 1W+1S) 60.00 KW 9118.00 547080.00

1.4 Meghani Garden Head Works - 40 HP - 30 kw ( 1W+1S) 60.00 KW 9118.00 547080.00

2 Installtion, Testing and Commissioning

2.1 Hifli Head Works 40 HP - 30 kw (1W+1S) 2.00 Nos 6250.00 12500.00

2.2 Gadhda Road Ghanshyam Nagar Head Works 40 HP - 30 kw ( 1W+1S) 2.00 Nos 6250.00 12500.00

2.3 Vihavav Head Works -40 HP - 30 kw ( 1W+1S) 2.00 Nos 6250.00 12500.00

2.4 Meghani Garden Head Works - 40 HP - 30 kw ( 1W+1S) 2.00 Nos 6250.00 12500.00

3 Sluice Valve: Providing and supplying ISI Mark CI D/F Sluice valve as per IS 14846 of following class and diameter including all taxes, Insurance, Transportation , Freight Charges , Loading , Unloading , Conveyence To Departmental Stores Stacking etc

3.1 Hifli HW Size 200 mm NB For Delivery ( PN 1 With hand Wheel /Cad Operated ) 2.00 Nos 5848.00 11696.00

3.2 Ghanshyam Nagar Hw Size 200 mm NB For Delivery ( PN 1 ) 2.00 Nos 5848.00 11696.00

3.3 Vihavav HW Size 200 mm NB For Delivery ( PN 1 With ) 2.00 Nos 5848.00 11696.00

3.4 Meghani Garden HW Size 200 mm NB For Delivery ( PN 1 ) 2.00 Nos 5848.00 11696.00

4 Providing and supplying ISi mark Cl D/F Butterfly Valves as per IS: 13095 (Latest Edition) of following class and diameter including all taxes, insurance, transportation. freight charges. oclroi, inspection charges, loading, unloading, conveyance to departmental stores, stackng etc. complete.

4.1 Hifli HW Size 200 mm NB For Delivery ( PN 1 ) 2.00 Nos 5866.00 11732.00

4.3 Ghanshyam Nagar Hw Size 200 mm NB For Delivery ( PN 1 ) 2.00 Nos 5866.00 11732.00

4.4 Vihavav HW Size 200 mm NB For Delivery ( PN 1 ) 2.00 Nos 5866.00 11732.00

4.4 Meghani Garden HW Size 200mm NB For Delivery ( PN 1 ) 2.00 Nos 5866.00 11732.00

5 Providing and supplying ISi mark Cl D/F Reflux Valves as per 15:5312 (Latest Edition) of following class and diameter including all loxes, insurance, transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to departmental stores, stacking etc. complete.

5.1 Hifli HW Size 200 mm NB For Delivery ( PN 1 ) 2.00 Nos 8027.00 16054.00

5.3 Ghanshyam Nagar Hw Size 200 mm NB For Delivery ( PN 1 ) 2.00 Nos 8027.00 16054.00

5.5 Vihavav HW Size 200 mm NB For Delivery ( PN 1 ) 2.00 Nos 8027.00 16054.00

5.7 Meghani Garden HW Size 200mm NB For Delivery ( PN 1 ) 2.00 Nos 8027.00 16054.00

6 Lowering, laying and jointing in position following C. I. I D/F Reflux valves, Butterfly valves, Sluice valves and Air valves including cost of all labour, jointing material, including nut bolts and giving satisfactory hydraulic testing, etc. complete

6.1 Hifli HW Size 200 mm NB For Delivery ( PN 1 ) 6.00 Nos 853.30 5119.80

6.3 Ghanshyam Nagar Hw Size 200 mm 6.00 Nos 853.30 5119.80

6.5 Vihavav HW Size 200 mm NB For Delivery ( PN 1 ) 6.00 Nos 853.30 5119.80

6.7 Meghani Garden HW Size 200mm NB For Delivery ( PN 1 ) 6.00 Nos 853.30 5119.80

7 MS PIPE :- Manufacture, Supply & Delivery of Electric Resistance welded ( Up To 400 mm ) Submerged Arc Welded ( Above 400 mm )MS Pipe Having Beveled ends Plate or Coil Confirming To IS-3589-2001 Or Its Latest Revision/ ammendment for following Thickness outside diameter at GWSSB store or Site anywhere in Gujarat state Including all taxes, Insurance, Transportation, Freight Charges Octroi , Inspection Charges , Loading Unloading Conveyance To Departmental Stores , Stacking Etc All Complete. ( Rate To MS Pipe based on the ex. works price of HR Coil as Rs.67500.00 Per MT - without GST( Above 3.15 mm To 10 mm ) & Rs.68000.00 Per MT Without GST ( Above 10 mm ) as on Feb-2022 ( WPI Index Of HR Coil Of Jan-2022 is 155.8) - I/S Epoxy Painting (100 Micron ) & O/S Gunniting 25 mm -

7.1 At Hilfi HW - 168.3 mm 4.5 mm Thick Delivery 6.00 Rmt 1550.00 9300.00

7.2 Header - 323.9 mm 5.6 mm Thick Delivery 5.00 Rmt 3597.00 17985.00

7.3 Ghanshyam Nagar HW - 168.3 mm 4.5 mm Thick Delivery 6.00 Rmt 1550.00 9300.00

7.4 Header - 219.1 mm 4.5 mm Thick Delivery 5.00 Rmt 2023.00 10115.00

7.5 Vihavav Nagar HW - 219.1 mm 4.5 mm Thick Delivery 6.00 Rmt 2023.00 12138.00

7.6 Header - 323.9 mm 5.6 mm Thick Delivery 5.00 Rmt 3597.00 17985.00

7.7 Meghani Garden HW - 168.3 mm 4.5 mm Thick Delivery 6.00 Rmt 1550.00 9300.00

7.8 Header - 219.1 mm 4.5 mm Thick Delivery 5.00 Rmt 2023.00 10115.00

8 MS PIPE :- Lowering, Laying, Jointing & Welding In Position to correct Line & Level MS Pipe with Outer Gunniting & Inside Lining / Epoxy Painting on Pedestal or Chairs Upon Prepared Formation or Prepared bedding in Trenches The Rates Include Conveyence From Store To Site Of Work loading , Unloading , Joint Plastering, Hydrotesting Etc Complete.

8.1 Hilfi HW - 168.3 mm 4.5 mm Thick Delivery 6.00 Rmt 248.40 1490.40

8.2 Header - 323.9 mm 5.6 mm Thick Delivery 5.00 Rmt 341.55 1707.75

8.3 Ghanshyam Nagar HW - 168.3 mm 4.5 mm Thick Delivery 6.00 Rmt 207.00 1242.00

8.4 Header - 219.1 mm 4.5 mm Thick Delivery 5.00 Rmt 248.40 1242.00

8.5 Vihavav Nagar HW - 219.1 mm 4.5 mm Thick Delivery 6.00 Rmt 248.40 1490.40

8.6 Header - 323.9 mm 5.6 mm Thick Delivery 5.00 Rmt 341.55 1707.75

8.7 Meghani Garden HW - 168.3 mm 4.5 mm Thick Delivery 6.00 Rmt 207.00 1242.00

8.8 Header - 219.1 mm 4.5 mm Thick Delivery 5.00 Rmt 248.40 1242.00

9 MS Specials Flanged Ends Size :- Up To 300 mm Dia 200.00 Kg 98.00 19600.00

10 Supply, Installation , Testing & Commissioning of Flange ends Expansion Belows as per EJMA Standards Of Overall Length of Minimum 300 mm , designed for 15 mm Axial Compression and 5 mm axial Extension With Tie Rods Etc Of Following MOC & PressureRatings. MOC :-Belows :SA 240 Gr.304; Internal Sleeve :SA 240 Gr.304; Weldends : IS 2062 Gr.B; FLanges :IS 2062 Gr.B(Drilling as per IS 1538 /IS 6392 ) & lIMIT Rods & Nuts :CS - IS 1367 -

10.1 At Hifli Head Work - 200 MM NB 2.00 Nos 6216.00 12432.00

10.3 Ghanshyam Nagar HW - 200 MM NB 2.00 Nos 6216.00 12432.00

10.5 Vihavav HW - 200 MM NB 2.00 Nos 6216.00 12432.00

10.7 Meghani Garden Head Work - 200 MM NB 2.00 Nos 6216.00 12432.00

11 Supply, installation, testing & commissioning approved make coupled vacuum pump set with horizontal foot mounted TEFC squirrel cage motor having under mentioned capacity working on 3 phase, 50 ±3%Hz, 415 V ± 10%, with base plate, DOL starter, cable, GI medium duty suction pipes 12 meters long, specials, valve, PVC tank of 250 litres capacity etc. complete. MaterialofConstructions:Impeller-SS/CF8M,Shaft:SS410,Casing:CIFG26 (03 HP) 4.00 Nos 38400.00 153600.00

Total Amount Rs:- 2903070.70

Muncipal Engineer Chief Officer

Botad Nagarpalika Botad Nagarpalika

BOTAD NAGARPALIKA-BOTAD

DISTRICT :- BOTAD

BID DOCUMENTS FOR PROPOSED MACHINERY WITH ELECTRIFICATION WORK IN DIFFERENT HEAD WORK IN BOTAD, DIST.: BOTAD.

SITC OF ELECTRICAL WORK IN DIFFERENT HEAD WORKS IN BOTAD HEAD WORKS

SCHEDULE B - 02

SR.NO. ITEM DESCRIPTION QTY UNIT FINAL RATE AMOUNT IN RS.

1 SITC of LV MCC Panel totally enclosed, dust & bermin proof, indoor type, minimum degree of protection - IP 52 as per IS: 2147, operation on 3-Phase, 4 Wire, 415V, 50Hz, Neutral effectively grounded, with instrumentation compartments accomodating LED type indicating lamps, control contactors as per IS: 13947, CT of accuracy class- I as per IS: 2705, relays, meters & control MCBs, air insulated electrolitic grade Aluminum bus bar for three phase & neutral system with incomming breaker- microprocessor based Air Circuit Breakers (electrically operated drawout type)/ air break fixed type MCCB with trip free mechanism, current limiting type as per IS: 8828, Motor Contractor (as per type -2 coordination), Overload Relay with built-in single phasing prevention feature & auxiliary feeders as per SLD drawings, momentary contact type push buttons, equipment fittings, bus bars, cable boxes, cable gland, incoming & ougoing cable connection for 1100V grade, Aluminium/ Copper conductor XLPE / PVC insulated & PVC sheathed armoured cable, 10% spare terminals, power wiring using 1100V grade, FRLS insulated copper conductor wires conforming to IS: 694 & 8130, cable compartments / alleys of minimum 300 mm size, GI / Al earth bus bar for entire length. MCC shall be fabricated from cold rolled, coled annealed (CRCA) sheet steel & minimum thickness of various members shall be as follows:Base Frame / Channel / Gland Plate: 3 mm, Load Bearing Members / Doors: 2 mm and Internal Partitions: 1.6 mm. Auto Transformer Starter with MCCB, Contactor, O/L relay, cast resin type CT, Digital MFM, Analogue Ammeter, SPP, Timer etc.

1.1 Hifli Head Works - 40 HP - 30 kw ( 1W+1S) 2.00 Nos 54475.00 108950.00

1.2 Gadhda Road Ghanshyam Nagar Head Works 40 HP - 30 kw ( 1W+1S) 2.00 Nos 54475.00 108950.00

1.3 Vihavav Head Works -40 HP - 30 kw ( 1W+1S) 2.00 Nos 54475.00 108950.00

1.4 Meghani Garden Head Works - 40 HP - 30 kw ( 1W+1S) 2.00 Nos 54475.00 108950.00

2 Incomer Above 80 A, upto & including 250 A, 3 & 4 Pole, Air Break Fixed MCCB conforms to IS / IEC 60947-2 with trip free mechanism, current limiting type with Thermal-Magnetic / Microprocessor release (O / C, S / C & E / F) with adjustable settings & having minimum 2NO+2NC potential free auxiliary contacts with all necessary Electro-Mechanical protections & interlocks etc. MCCB module, when used as Incommer / Bus Coupler, shall have enclosure dimensions- 1800(H) x 600(W) x 600 (D) & following technical features:4 Pole, 160A MCCB with Breaking Capacity of Icu=50 KA at 415V (Ics =100% of Icu), Microprocessor release 4.00 No. 43183.00 172732.00

3 SITC of Power Distribution Board (PDB) for MOV as under:3 Phase 4 Wire TPN, 6 way Prewired LDB cum PDB for Lighting and EOT and Aux. power supply:Incoming: 40A TPN, MCB 'C' CurveOutgoing: 3 nos. 6-32A TP MCB 'B' Curve, 3 nos. 6-32A TP MCB 'C' Curve 4.00 Nos. 8072.93 32291.72

4 MEDIUM VOLTAGE CABLES Supply, laying, testing & commissioning 1.1 kV grade, XLPE insulated, stranded Aluminium conductor, galvanised steel flat strip / round wire armoured, extruded PVC type ST2 sheathed, heavy duty cable (to be laid on wall surface with necessary clamps / in existing cable trench / cable trays / conduit / pipe sleeves at road crossing or floor as per site requirement) conforming to IS:7098 (Part-1) & IEC:60502 (Part-1) of following sizes:

4.1 3.5C x 35 sq. mm. A2XFY Cable (1Run for Incomer) 20.00 Mtr 144.00 2880.00

5 CABLE END TERMINATION AND CONNECTION: SITC of Single / Double compression weather proof type Ni-plated brass cable glands and crimping type Bimetalic lugs / sockets with necessary tools and equipments as specified in specifications and IS. The glands and lugs / sockets shall be suitable for cable size and type mentioned below & as per specificaitons. 1) Earthing the glands and arm ouring with earthing clamp and jumper and also connecting to common earth bar. 2) The job also includes, if necessary, supply & fixing of extension busbar of same material on MCCB or panel board terminal / connector to connect more than one no. of parallel cables or to connect higher size cable to lower size unit. The job also includes earthing the glands and armour of the cable with common earth bar or flexible copper mesh.(Cable termination qty. shall be as per site requirement) 16.00 Nos 405.00 6480.00

6 Supply at Site, Storage , Erection, Installation, Testing & Commissioning of Funnel type Earthing having earth plate of following size burried in specially prepared earth pit of req. mtr below ground with 40.0 kg charcoal and salt with alternate layers of charcoal and salt, 20 mm dia GI pipe with funnel with wiremesh for wate ringandbrick massonary blockand C.I. cover completeas per para 7.3 of IS 3043 with necessary length of double 25 x 3 mm Copper Plate bolted with lug to the plate and covered in 12 mm dia G.I. pipe 2.5 mtr longcomplete connectedtothe requiredpointofD.P. withendsocketas per direction and duly tested by earth tester confirming to ISS.as per drawing with &specifications. comp. with30 x 30 x 0.35 cm CI earthplate Comp. 4.00 Nos. 2700.00 10800.00

7 full Bore Electromagnetic Flow Meter-Regular Power operated PN10 (300 mm Nominal Bore)Design, Supply, Installation, Testing, Commissioning of Full Bore Electromagnetic flow meter with factory calibrated, Regular Power Operated, flanged connection, Flow sensor, Indicator, transmitter andtotaliser withall accessories viz. surge arrestor, associated cables, cabinets, hardwares, etc complete as per following specifications: Flow Meter/ Sensor: DC pulsed type, IP 68 Protection, Flanged process connection as per IS 1538 or equivalent standard, SS304/ Metallic Alloy Flow Tube, SS316/ SS 316 L/ Hastelloy Sensor, SS316/ Hastelloy Grounding Ring/ Inbuilt Grounding Electrode, Neoprene/ Polyurethane/ HardRubber/Rilsanlining, SS304/ Die Cast Aluminium/ Carbon steel with Anticorrosive Paint Coil Housing with Junction Box,CS flanges.Flow Transmitter/ Converter ( Remote Field Mounted): Microprocessor based, Modular design, 2 line LCD for indication of actual flowrate, forward, reverse, sum totaliser display, ±0.5% accuracy at 0.3 to 4 m/sec velocity, 4 to 20 mA with HART/Modbus output, one scalable pulse, one status output, IP 67 protection, Die cast aluminium/ polycarbonate/ SS316 with Anticorrosive Paint/ PU finish with glass windowen closure,Inbuil tEEPRO Mand Data Logger,20 meters cable length for sensor to transmitter communication etc alongwith wall mounted/ standmounted cabinet. 1.00 Nos 134422.00 134422.00

Total Amount Rs:- 799045.72

Muncipal Engineer Chief Officer

Botad Nagarpalika Botad Nagarpalika

BOTAD NAGARPALIKA-BOTAD

DISTRICT :- BOTAD

BID DOCUMENTS FOR PROPOSED MACHINERY WITH ELECTRIFICATION WORK IN DIFFERENT HEAD WORK IN BOTAD, DIST.: BOTAD.

SITC OF MACHINERY OF DIFFERENT HEAD WORKS OF BOTAD NAGARPALIKA

SCHEDULE B - 01

SR.NO. ITEM DESCRIPTION QTY UNIT FINAL RATE AMOUNT IN RS.

1.00 Supply, installation, testing & commissioning of horizontal split casing centrifugal pump motor set of specified duty parameters & guaranteed efficiency of following MOC with specified capacity, horizontal foot mounted TEFC squirrel cage induction motor (with minimum IE-3 efficiency class), working on three phase AC supply with 50 Hz ± 3%, 415 V ± 10%, rated speed 1450 RPM along with fabricated MS base frame, coupling, coupling guard, foundation bolts etc. as per relevant IS. M.O.C.: Impeller & Wearing Rings: CF8M, Casing: Cast Steel WCB , Shaft: SS 410, Shaft Sleeve: SS 410, Mechanical Seal (Above 30 kW), Base Frame:

1.01 Bhajanand Works - 40.HP - 30 kw ( 1W+1S) 60.00 KW 9118.00 547080.00

1.02 Spot Well Head Works - 40 HP - 30 kw ( 1W+1S) 60.00 KW 9118.00 547080.00

1.03 Karim Nagar Head Works -40HP - 30 kw ( 1W+1S) 60.00 KW 9118.00 547080.00

2.00 For Installtion, Testing and Commissioning -

2.01 Bhajanand Works - 40HP - 30 kw ( 1W+1S) 2.00 Nos 6250.00 12500.00

2.02 Spot Well Head Works - 40 HP - 30 kw ( 1W+1S) 2.00 Nos 6250.00 12500.00

2.03 Karim Nagar Head Works -40HP - 30 kw ( 1W+1S) 2.00 Nos 6250.00 12500.00

3.00 Sluice Valve: Providing and supplying ISI Mark CI D/F Sluice valve as per IS 14846 of following class and diameter including all taxes, Insurance, Transportation , Freight Charges , Loading , Unloading , Conveyence To Departmental Stores Stacking etc

3.10 At Bhajanand HW Size 200 mm NB For Delivery ( PN 1 With hand Wheel /Cad Operated ) 2.00 Nos 9813.00 19626.00

3.20 Spot Well Head Works Size 200 mm NB For Delivery ( PN 1 With hand Wheel /Cad Operated ) 2.00 Nos 9813.00 19626.00

3.30 Karim Nagar HW Size 200 mm NB For Delivery ( PN 1 With hand Wheel /Cad Operated ) 2.00 Nos 9813.00 19626.00

4.00 Providing and supplying ISi mark Cl D/F Butterfly Valves as per IS: 13095 (Latest Edition) of following class and diameter including all taxes, insurance, transportation. freight charges. oclroi, inspection charges, loading, unloading, conveyance to departmental stores, stackng etc. complete.

4.01 At Bhajanand HW Size 200 mm NB For Delivery ( PN 1 2.00 Nos 5866.00 11732.00

4.03 At Spotwell HW Size 200 mm NB For Delivery ( PN 1 2.00 Nos 5866.00 11732.00

4.05 Karim Nagar HW Size 200 mm NB For Delivery ( PN 1 ) 2.00 Nos 5866.00 11732.00

5.00 Providing and supplying ISi mark Cl D/F Reflux Valves as per 15:5312 (Latest Edition) of following class and diameter including all loxes, insurance, transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to departmental stores, stacking etc. complete.

5.01 Bhajanand HW Size 200mm NB For Delivery ( PN 1 ) 2.00 Nos 8027.00 16054.00

5.03 Spotwell HW Size 200 mmNB For Delivery ( PN 1 ) 2.00 Nos 8027.00 16054.00

5.05 Karim Nagar HW Size 200 mm NB For Delivery ( PN 1 ) 2.00 Nos 8027.00 16054.00

6.00 Lowering, laying and jointing in position following C. I. I D/F Reflux valves, Butterfly valves, Sluice valves and Air valves including cost of all labour, jointing material, including nut bolts and giving satisfactory hydraulic testing, etc. complete

6.01 Bhajanand HW Size 200 mm NB For Delivery ( PN 1 6.00 Nos 672.75 4036.50

6.03 Spotwell HW Size 200 mmNB For Delivery ( PN 1 ) 6.00 Nos 672.75 4036.50

6.05 Karim Nagar HW Size 200 mm NB For Delivery ( PN 1 ) 6.00 Nos 853.30 5119.80

7.00 MS PIPE :- Manufacture, Supply & Delivery of Electric Resistance welded ( Up To 400 mm ) Submerged Arc Welded ( Above 400 mm )MS Pipe Having Beveled ends Plate or Coil Confirming To IS-3589-2001 Or Its Latest Revision/ ammendment for following Thickness outside diameter at GWSSB store or Site anywhere in Gujarat state Including all taxes, Insurance, Transportation, Freight Charges Octroi , Inspection Charges , Loading Unloading Conveyance To Departmental Stores , Stacking Etc All Complete. ( Rate To MS Pipe based on the ex. works price of HR Coil as Rs.67500.00 Per MT - without GST( Above 3.15 mm To 10 mm ) & Rs.68000.00 Per MT Without GST ( Above 10 mm ) as on Feb-2022 ( WPI Index Of HR Coil Of Jan-2022 is 155.8) - I/S Epoxy Painting (100 Micron ) & O/S Gunniting 25 mm -

7.01 At Bhajanand HW - 168.3 mm 4.5 mm Thick Delivery 6.00 Rmt 1550.00 9300.00

7.02 For Header - 219.1 mm 4.5 mm Thick Delivery 5.00 Rmt 2023.00 10115.00

7.03 At Spotwell HW - 168.3 mm 4.5 mm Thick Delivery 6.00 Rmt 1550.00 9300.00

7.04 For Header - 219.1 mm 4.5 mm Thick Delivery 5.00 Rmt 2023.00 10115.00

7.05 At Karimnagar HW - 219.1 mm 4.5 mm Thick Deliver 6.00 Rmt 2023.00 12138.00

7.06 For Header - 323.9 mm 5.6 mm Thick Delivery 5.00 Rmt 3597.00 17985.00

8.00 MS PIPE :- Lowering, Laying, Jointing & Welding In Position to correct Line & Level MS Pipe with Outer Gunniting & Inside Lining / Epoxy Painting on Pedestal or Chairs Upon Prepared Formation or Prepared bedding in Trenches The Rates Include Conveyence From Store To Site Of Work loading , Unloading , Joint Plastering, Hydrotesting Etc Complete.

8.01 At Bhajanand HW - 168.3 mm 4.5 mm Thick Deliver 6.00 Rmt 207.00 1242.00

8.02 For Header - 219.1 mm 4.5 mm Thick Delivery 5.00 Rmt 248.40 1242.00

8.03 At Spotwell HW - 168.3 mm 4.5 mm Thick Delivery 6.00 Rmt 207.00 1242.00

8.04 For Header - 219.1 mm 4.5 mm Thick Delivery 5.00 Rmt 248.40 1242.00

8.05 At Karimnagar HW - 219.1 mm 4.5 mm Thick Deliver 6.00 Rmt 248.40 1490.40

8.06 For Header - 323.9 mm 5.6 mm Thick Delivery 5.00 Rmt 341.55 1707.75

9.00 MS Specials Flanged Ends Size :- Up To 300 mm Dia 300.00 Kg 98.00 29400.00

10.00 Supply, Installation , Testing & Commissioning of Flange ends Expansion Belows as per EJMA Standards Of Overall Length of Minimum 300 mm , designed for 15 mm Axial Compression and 5 mm axial Extension With Tie Rods Etc Of Following MOC & Pressure Ratings. MOC :-Belows :SA 240 Gr.304; Internal Sleeve :SA 240 Gr.304; Weldends : IS 2062 Gr.B; FLanges :IS 2062 Gr.B(Drilling as per IS 1538 /IS 6392 ) & lIMIT Rods & Nuts :CS - IS 1367 -

10.01 At Bhajanand Head Work - 200MM NB 2.00 Nos 6216.00 12432.00

10.03 At Spotwell Head Work - 200MM NB 2.00 Nos 6216.00 12432.00

10.05 At KarimNagar Head Work - 200 MM NB 2.00 Nos 6216.00 12432.00

11.0 Supply, installation, testing & commissioning approved make coupled vacuum pump set with horizontal foot mounted TEFC squirrel cage motor having under mentioned capacity working on 3 phase, 50 ±3%Hz, 415 V ± 10%, with base plate, DOL starter, cable, GI medium duty suction pipes 12 meters long, specials, valve, PVC tank of 250 litres capacity etc. complete. Material of Constructions:Impeller-SS/CF8M,Shaft:SS410,Casing:CIFG26 (03 HP) 3.00 Nos 38400.00 115200.00

Total Amount Rs:- 2228020.45

Say Amount Rs. 2228020.00

Muncipal Engineer Chief Officer

Botad Nagarpalika Botad Nagarpalika

BOTAD NAGARPALIKA-BOTAD

DISTRICT :- BOTAD

BID DOCUMENTS FOR PROPOSED MACHINERY WITH ELECTRIFICATION WORK IN DIFFERENT HEAD WORK IN BOTAD, DIST.: BOTAD.

SITC OF ELECTRICAL WORK IN DIFFERENT HEAD WORKS IN BOTAD HEAD WORKS

SCHEDULE B - 02

SR.NO. ITEM DESCRIPTION QTY UNIT FINAL RATE AMOU. IN RS.

1 SITC of LV MCC Panel totally enclosed, dust & bermin proof, indoor type, minimum degree of protection - IP 52 as per IS: 2147, operation on 3-Phase, 4 Wire, 415V, 50Hz, Neutral effectively grounded, with instrumentation compartments accomodating LED type indicating lamps, control contactors as per IS: 13947, CT of accuracy class- I as per IS: 2705, relays, meters & control MCBs, air insulated electrolitic grade Aluminum bus bar for three phase & neutral system with incomming breaker- microprocessor based Air Circuit Breakers (electrically operated drawout type)/ air break fixed type MCCB with trip free mechanism, current limiting type as per IS: 8828, Motor Contractor (as per type -2 coordination), Overload Relay with built-in single phasing prevention feature & auxiliary feeders as per SLD drawings, momentary contact type push buttons, equipment fittings, bus bars, cable boxes, cable gland, incoming & ougoing cable connection for 1100V grade, Aluminium/ Copper conductor XLPE / PVC insulated & PVC sheathed armoured cable, 10% spare terminals, power wiring using 1100V grade, FRLS insulated copper conductor wires conforming to IS: 694 & 8130, cable compartments / alleys of minimum 300 mm size, GI / Al earth bus bar for entire length. MCC shall be fabricated from cold rolled, coled annealed (CRCA) sheet steel & minimum thickness of various members shall be asfollows:BaseFrame / Channel / Gland Plate: 3 mm, Load Bearing Members / Doors: 2 mm and Internal Partitions: 1.6 mm. Auto Transformer Starter with MCCB, Contactor, O/L relay, cast resin type CT, Digital MFM, Analogue Ammeter, SPP, Timer etc.

1.1 Bhajanand Head Work 40 HP - 30 kw ( 1W+1S) 2.00 Nos 54475.00 108950.00

1.2 Spot Well Head Works - 40 HP - 30 kw ( 1W+1S) 2.00 Nos 54475.00 108950.00

1.3 VKarim Nagar Head Works - 40 HP - 30 kw ( 1W+1S) 2.00 Nos 54475.00 108950.00

2 MEDIUM VOLTAGE CABLES Supply, laying, testing & commissioning 1.1 kV grade, XLPE insulated, stranded Aluminium conductor, galvanised steel flat strip / round wire armoured, extruded PVC type ST2 sheathed, heavy duty cable (to be laid on wall surface with necessary clamps / in existing cable trench / cable trays / conduit / pipe sleeves at road crossing or floor as per site requirement) conforming to IS:7098 (Part-1) & IEC:60502 (Part-1) of following sizes:

2.1 3.5C x 35 sq. mm. A2XFY Cable (1Run for Incomer) 20.00 Mtr 144.00 2880.00

3 SITC of Power Distribution Board (PDB) for MOV as under:3 Phase 4 Wire TPN, 6 way Prewired LDB cum PDB for Lighting and EOT and Aux. power supply:Incoming: 40A TPN, MCB 'C' CurveOutgoing: 3 nos. 6-32A TP MCB 'B' Curve, 3 nos. 6-32A TP MCB 'C' Curve 3.00 Nos. 8072.93 24218.79

4 IncomerAbove 80 A, upto & including 250 A, 3 & 4 Pole, Air Break Fixed MCCB conforms to IS / IEC 60947-2 with trip free mechanism, current limiting type with Thermal-Magnetic / Microprocessor release (O / C, S / C & E / F) with adjustable settings & having minimum 2NO+2NC potential free auxiliary contacts with all necessary Electro-Mechanical protections & interlocks etc. MCCB module, when used as Incommer / Bus Coupler, shall have enclosure dimensions- 1800(H) x 600(W) x 600 (D) & following technical features:4 Pole, 160A MCCB with Breaking Capacity of Icu=50 KA at 415V (Ics =100% of Icu), Microprocessor releas 3.00 No. 43183.00 129549.00

5 CABLE END TERMINATION AND CONNECTION: SITC of Single / Double compression weather proof type Ni-plated brass cable glands and crimping type Bimetalic lugs / sockets with necessary tools and equipments as specified in specifications and IS. The glands and lugs / sockets shall be suitable for cable size and type mentioned below & as per specificaitons. 1) Earthing the glands and arm ouring with earthing clamp and jumper and also connecting to common earth bar. 2) The job also includes, if necessary, supply & fixing of extension busbar of same material on MCCB or panel board terminal / connector to connect more than one no. of parallel cables or to connect higher size cable to lower size unit. The job also includes earthing the glands and armour of the cable with common earth bar or flexible copper mesh.(Cable termination qty. shall be as per site requirement) 9.00 Nos. 405.00 3645.00

6 Supply at Site, Storage , Erection, Installation, Testing & Commissioning of Funnel type Earthing having earth plate of following size burried in specially prepared earth pit of req. mtr below ground with 40.0 kg charcoal and salt with alternate layers of charcoal and salt, 20 mm dia GI pipe with funnel with wiremesh for wate ringandbrick massonary blockand C.I. cover completeas per para 7.3 of IS 3043 with necessary length of double 25 x 3 mm Copper Plate bolted with lug to the plate and covered in 12 mm dia G.I. pipe 2.5 mtr longcomplete connectedtothe requiredpointofD.P. withendsocketas per direction and duly tested by earth tester confirming to ISS.as per drawing with &specifications. comp. with30 x 30 x 0.35 cm CI earthplate Comp. 3.00 Nos. 2700.00 8100.00

7 full Bore Electromagnetic Flow Meter-Regular Power operated PN10 (300 mm Nominal Bore)Design, Supply, Installation, Testing, Commissioning of Full Bore Electromagnetic flow meter with factory calibrated, Regular Power Operated, flanged connection, Flow sensor, Indicator, transmitter andtotaliser withall accessories viz. surge arrestor, associated cables, cabinets, hardwares, etc complete as per following specifications: Flow Meter/ Sensor: DC pulsed type, IP 68 Protection, Flanged process connection as per IS 1538 or equivalent standard, SS304/ Metallic Alloy Flow Tube, SS316/ SS 316 L/ Hastelloy Sensor, SS316/ Hastelloy Grounding Ring/ Inbuilt Grounding Electrode, Neoprene/ Polyurethane/ HardRubber/Rilsanlining, SS304/ Die Cast Aluminium/ Carbon steel with Anticorrosive Paint Coil Housing with Junction Box,CS flanges.Flow Transmitter/ Converter ( Remote Field Mounted): Microprocessor based, Modular design, 2 line LCD for indication of actual flowrate, forward, reverse, sum totaliser display, ±0.5% accuracy at 0.3 to 4 m/sec velocity, 4 to 20 mA with HART/Modbus output, one scalable pulse, one status output, IP 67 protection, Die cast aluminium/ polycarbonate/ SS316 with Anticorrosive Paint/ PU finish with glass windowen closure,Inbuil tEEPRO Mand Data Logger,20 meters cable length for sensor to transmitter communication etc alongwith wall mounted/ standmounted cabinet. 2.00 Nos 134422.00 268844.00

Muncipal Engineer Chief Officer

Botad Nagarpalika Botad Nagarpalika