REPAIR TO ROOF TREATMENT, SUNKEN TILING IN TOILET, BATH IN FAFA AND KITCHEN IN MD ACCN UNDER AOR OF AGE B/R -I AT GE WEST BAREILLY

Amount

Demolition of cement concrete as in ground floor & paving n.exc 15cm thick (below or above ground level) complete all as specified and directed.

Demolition of brick work built in cement mortar including all quoins, arches, pillars etc. complete all as specified and directed.

Material & labour for brick work with fly ash bricks built in CM (1:6) straight or curved exceeding 6mtr mean radius complete all as specified and directed.

Material & labour for brick work with Sub class 'B' bricks straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed.

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) exc. 1.5 Sqm but n.exc 4 sqm each and removing from site complete all as specified and directed.

All as per Item No.5 above but area n.exc.1.5 Sqm each.

Taking down shutter of any description area exc. 1 Sqm but n.exc.2 Sqm each and removing from site complete all as specified and directed.

All as per Item No. 7 above but area n.exc.1.0 Sqm each.

Material & labour for second class hard wood (Sal) plain, solid, straight chawkats and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints all as specified.

Supply & fix 30mm thick flush shutter solid coreconstruction with block board core and plywood face panels, commercial type on both sides as specified.

Supply & fix 35mm thick 2nd class hard wood (Sal) plain, framed, parelled shutters (any number of panels) with panells of timber flat on both sides (feather edged) or of veneered particle board, medium density, wood particle board with commercial face veneers.

Supply & fix 35mm thick 2nd class hard wood (sal) glazed & skelton shutters ,open rebated, prepared to receive glass, gauze etc, without sash bar edge of framing plain, chamfered or rounded, fitted with cut or mitred beads for securing glass, gauge etc sizes of members of shutters as specified in SSR Part-I section 8 supplied and fitted to chowkhats all as specified.

Supply & fix 100mm size aluminium alloy handles, febricated type extruded section, ISI marked all as specified.

Supply & fix 150mm long aluminium anodised barrel tower bolts of extruded section all as specified.

Supply & fix 250mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts all as specified.

Supply & fix 100mm size aluminium anodised hasp & staple safety type and fixing bolts to hinge plate fixed with screws all as specified.

Supply & fix 150mm long cover plate for floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed on floor.

Supply & fix continuous Piano hinges, mild steel bright finish or electro galvanised width of flaps 30mm when open all as specified.

M&L in repair block board grade-I quality, exterior grade, commercial type 19/20mm thickness incl necessary beading as in pelmet box all as directed and specified.

Extra over 19/20mm thick block board for external teak wood lipping 6 mm thick incl 2 coats of polishing and complete all as specified and directed.

Taking down old steel window with side hung shutters incl. projecting or box type hinges, steel handle and steel peg stay and refixing in same opening after necessary repair, welding and replacing damaged / missing part and making good dismantled portion of walls incl. PCC bed block and rendering on jambs / cill / soffit etc. complete all as specified and directed.

Supply & fix steel windows with side hung shutters incl box type hinges, steel handle and steel peg stay complete with glazing bar, dovetailed or welded incl taking down old one complete all as specified and directed.

Supply & fix steel ventilator with top/side hung shutter including hinges, steel peg stay incl taking taking down old one complete all as specified and directed.

Supply & fixing mild steel framed work such as grills, grating,gauge etc with end of bars shouldered and/ or riveted forged into spikes, framed guard bars, railings and similar work complete conforming to Fe-290 Gde E-165 complete all as specified & directed.

Material & labour for factory made steel window box type using ERW 'P' section comprising double frame for gauged and glazed skeleton shutter jointed internally with flat iron 40x3mm complete including hinges, handle tower bolts stops, lugs etc all as shown on drawing Note (i) For the purpose of measurement & payment double shutter with frame shall be considered as one unit (ii) Unit rate quoted against this item shall also include the iron mongry as required (iii) Guard bars glazing & wire mesh shall however be measured & paid for separately under respective items of Sch ‘A’ complete all as specified and directed .

Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames, glazed with putty or fixed with beads complete all as specified and directed.

Material & labour for 3 mm thick sheet glass ordinary quality and glazing with oil putty / beads in square, area n.exc 0.5 Sqm in each pane complete all as specified and directed.

Supply & fix in galvanised steel wire cloth 0.50mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

All as per Item No. 28 above but fixed in repairs.

Supply & fix mild steel frame consisting of wire cloth, 0.50mm nominal dia of wire and average width of aperture 1.18mm fixed on steel frame made up of MS flat iron 20x3mm th after drilling out old ribates and flat iron strips and replacing with new 20 x 3 mm F.I. strips and new rebbets incl. necessary welding and painting of fillets to match with existing work as directed at site. and fixed with stainless wire staples fixed as in repairs in wooden frames complete all as specified and directed.

Material & labour for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube supplying & fixing in opening as per specification & drawing.

Material & labour for Factory made solid panel PVC wood grain printed door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat molded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side &as gap insert for top rail & bottom rail paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed togathers with solvent cement supplying & fixing the frame at site Make : Rajshri/SINTEX (Make should be engraved on item ) complete all as specified & directed.

Supply & fix butt hinges stainless steel 100mm with screw complete all as specified and directed.

Supply & fix magnet catcher suitable for cupboard shutter complete all as specified and directed.

Supply & fix rubber beading for doors of required size all as specified and directed.

Supply & fix 0.50mm thick plain, aluminium sheeting, alloy 31000 H4 in drip and straight flashing on doors all as specified.

Taking down cement or cement lime plaster any description from brick or stone walls/ceiling etc including raking out joints, hacking for key & scrubbing down with water all as specified.

Material & labour for rendering 15mm thick in CM 1:6 on brick work or concrete surface of wall and finished surface even and smooth complete all as specified and directed.

Material & labour for rendering 10mm thick in CM 1:4 on ceiling and finished surface even and smooth complete all as specified and directed.

Material & labour for preparing newly plastered surfaces of wall and applying three coats of white wash complete all as specified and directed.

All as per Item No. 40 above but three coats white wash on ceiling.

M&L preparation of New wall plaster surfaces and applying two coats of cement base paint over a coat of cement primer

M&L preparation of walls and applying two coats of oil bound distemper over one coat of primer after finishing the wall surfaces with JK/Birla wall care putty to achive smooth finish complete all as specified and directed

Material & labour for complete removal of existing treatment of walls and applying JK / Birla wall care putty to make surface even and smooth complete all as specified and directed.

Material & labour for preparing old/newly plastered surfaces of wall and applying two coats of oil bound distemper complete all as specified and directed.

Preparation of old plastered or unplastered surface of walls and applying one coat of white wash on wall complete all as specified and directed.

All as per Item No. 46 above but applying one coat of white wash on ceiling.

Preparation of old decorated surface of wall by washing, scrubbing down, stopping and applying two coat of oil bound distemper complete all as specified and directed.

All as per item No. 48 above but applying two coats of cement base paint.

Material & labour for mild steel work as in small articles flat iron of required size as in hold fasts, angle cleats, clamps, hooks, straps and similar small articles complete all as specified and directed. conforming to the Gde Fe 410-0 or 310-0.

Material & labour for Preparation of new steel or iron surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

Material & labour for preparation of new wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer on new wooden surfaces complete all as specified and directed.

Preparation of old painted surface of wood and wood based materials of any description over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

All as per Item No.53 above but on steel surface -ditto-

Material & labour for 40 mm thick PCC 1:2:4 type B-1 (using 20mm graded stone agg.) as in floors finished even and smooth using extra cement all as specified and directed.

Dismantling of stone slabs & tiles of any description or thickness in floor aprons, cills etc laid bedded & pointed in any mortar complete all as specified and directed.

Supply & fix Glazed ceramic tiles (any shade) 300x200x6 to7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing surfaces as in dado/skirting including 10mm thick rendering in CM 1:4 complete all as specified and directed. (Make:Kajaria/ Somany/Orient).

Non-skid ceramic coloured tiles 7 to 8 mm thick (as approved) (square/ rectangular) area of each tile exc 0.06 sqm but n.exc 0.11 sqm, in floors etc. set & jointed in neat cement slurry & pointed in white or coloured cement to match with shade of tiles over 15mm thick screed bed in CM (1:6) complete all as specified.

First quality ,Non skid coloured ceramic tiles (of approved shade) 7 to 8 mm thick (square/rectangular), area of each tile exceeding 0.11 sqm but n exc 0.18 sqm, laid in floor including 15mm thick screed bed in CM 1:6,complete all as specified.

Material & labour for granite stone slab 15 to 18mm thick of any shade including grinding/moulding and polishing fixed over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

Material & labour for 14 to 16mm thick Udaipur Green Stone, polished (table rubbed & polished) as in floors, kitchen platforms, borders etc. over & including 15mm thick screeding in cement mortar 1:4 borders incl rounding of edges complete all as specified & directed. by Engr-in-charge

Material & labour for 25 mm thick PCC 1:2:4 - B0 (using 12.5 mm graded stone aggregate) as in floor finished surface fair and even complete all as specified and directed.

Supply & fix 25mm dia MS fancy type vista pattern curtain rod of approved finish of superior quality including fancy type knobs at both ends, bracket for supports & rings etc complete all as specified and directed.

Supply & fix in repair vitreous china squatting pan "Orrissa" pattern of size 580X440mm white with integral footrests excluding flushing cistern including connection to trap and cistern,, flush pipe and making good disturbed surface of floor complete all as specified and directed.

Supply & fix vitreous china wash down water closet pan (Pedestal pattern) white, with 'P' or 'S' trap including connection to trap and cistern and flush pipe excluding flushing cistern) including PVC white seat cover, closed pattern fixed with aluminium hinging device and making good to disturbed surface of floor, fixed as in repair complete all as specified and directed. by GE/Engineer-in-charge.

Supply & fix PVC low level flushing cistern of 10 ltr capacity fixed in repair including siphon float valve and rubber cone etc complete all as specified and directed. Make: Commander/ slimline/waterbird or as approved by GE/ Engineer-in charge.

Supply & fix 15mm bore stop valves brass chromium plated screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipes fixed as in repair complete all as specified and directed.

Supply & fix PVC connection of 15mm bore 600mm long with brass coupling on both ends of superior quality complete all as specified and directed.

Supply & fix CP brass 75mm dia shower rose with or without swival joints with arms suitable 15mm bore pipe fixed as in repair complete all as specified and directed.

Supply & fix vitreous china wash basin white flat back type of size 550x400mm including cutting for and pinning in ends of brackets as in repair and 32mm dia chromium plated waste coupling complete all as specified and directed by GE/Engineer-in-charge.

Supply & fix kitchen sinks made of stainless steel 0.80mm thick with plug, washer and waste including bedding in cement mortar including fixing cantilever brackets and connecting union to pipe, over all size1140mmx510mm and bowl size 560mmx405mm complete fixed in repair all as specified. Make: Nirali or as approved by GE/Engineer-in-charge.

Supply & fix superior quality CP brass tubular towel rail 20mm dia, D type, 60 cm long between flanges fixed as in repair complete all as specified and directed.

Supply & fix 15mm CP dia bib taps of superior quality with long body cast copper alloy with crutch or butterfly handle screwed for iron pipe fixed as in repairs, complete all as specified and directed.

Supply & fix 15mm dia pillar taps of superior quality cast copper alloy with capstan heads, cromium plated screwed down high pressure with or without lettered hot or cold with long screwed shanks and fly nuts, screws for iron pipe fixed as in repairs complete all as specified and directed.

Supply & fix 15mm dia single lever one hole basin mixture of superior quality with capstan heads, cromium plated cast copper alloy with hot and cold arrangements with long shank and cup , screws for iron pipe fixed.as in repairs Make all as specified and directed

Supply & fix 15mm dia CP angle valve of superior quality fixed as an repairs complete all as specified and directed.

Supply & fix CP brass shower rose of superior quality long body with or without swivel joints of 125mm size fixing with 15mm pipe fixed as in repairs, complete all as specified and directed.

Supply & fix 15mm bore stop valves fancy CP concealed type screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe as in repair complete all as specified and directed.

Supply & fix in repair 20 mm bore Gun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe complete all as specified & directed.

Supply & fixing in repair chromium plated superior quality brass soap dish as per sample complete all as specified

Supply & fix in repair 100mm dia CP grating complete all as specified and directed.

Supply & fix in repair 125mm dia CP grating with hole for waste pipe complete all as specified and directed.

Supply & fix in repair PVC waste pipe 32mm dia for wash hand basin complete all as specified and directed.

Cutting chases, pining in making good to facing where required and pointing in CM 1:3 to edges of landing, steps, cills, sunshades, shelves, lintal etc and cutting chases for concelled water tubing making good cutting exc. 10 cm but n.exc 20 cm girth in brick wall complete all as specified and directed.

Taking up or down steel tubing and connections 15mm bore including cleaning for refixing or removal from the site complete all as specified and directed.

All as per serial item No.86 above but 20mm bore.

Supply & fix GI tubing 15mm bore medium grade with all fittings fixed to wall, ceiling or laid in floor as directed . Make: Jindal/TATA/ QST complete all as specified and directed.

All as per serial item No 88 above but 20mm bore.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs cleaning etc and hoisting if required reconnecting and re-fixing in position and cleaning and removing all scale and dirt, etc from tanks and from mouths of circulating pipes for exc 250 & n exc 500 ltr capacity including writing date and year of cleaning of height not less than 50mm and width not less than 20mm on plain base with synthetic enamel paint etc complete all as specified and directed.

All as per Item No. 90 above but exc 500ltr and n.exc. 1000 ltr capacity.

Dismantling existing water tanks capacity exc. 250 ltrs but n exc. 500 ltrs, removing from site complete all as specified and directed.

Supply & fix 500 ltrs capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted & fixed in position complete all as specified and directed. Make: Sintex/Dhara/Rotex.

Supply & fix ball valve high pressure PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minium weight 20mm - 210 gms complete all as specified and directed.

Material & Labour for 75 mm thick PCC 1:3:6, type C-1 (using 20mm graded stone aggregate) as in plinth protection, surfaces finished even and smooth without using extra cement complete all as specified & directed.

Providing water proofing treatment to RCC sunken slab as specified and directed as under:- (a) Cleaning the existing RCC sunken slab and vertical wall/RCC beam and hacking the surface. (b) 15mm thick plastering over the floor & vertical surface in CM 1:4, mixed with liquid water proofing compound @ 200ml per 50 kg of cement trowelled to even and smooth finish without using extra cement .(Water proofing compound shall be measured and paid separately). (c ) filling the sunken portion with water for 72 hrs and carring out the ponding test.(Any leakage /seapage noticed shall be repaired). (d) Applying two coats of elastomaric acrylic water proof coating Make: Dr. Fixit of pidilite or equivalent per sqm in each coat with roller application complete all as specified and directed.. (Note: Each coat of elastomaric acrylic compound requires 6-8hrs to dry up itself second coat shall be applied on getting the first coat completely dried up.) Make : Dr Fixit, Acrylic Polymer, Dobond Hydro build LW

Taking down old existing water proofing treatment from the top of RCC/ arch slab, including taking down existing PCC padding or plaster and hacking the top of RCC slab, cleaning with water and disposal of rubbish off the premises complete all as specified & directed.

Material & Labour for 40mm thick average thickness of PCC 1:2:4 type B-1 (using 20mm graded stone aggregates) as in padding on roof finished even and fair without using extra cement all as specified and directed.

Material & labour for cleaning of concrete or plastered surfaces of roof and applying priming coat using with bituminous primer @ 0.30kg per Sqm followed evenly by a tack coat @ 1.20 kg per Sqm using 85/25 grade industrial hot blown bitumen , over it laid with APP modified polymeric water proofing membrane minimum weight 3.6 Kg per Sqm reinforced with non-woven polyester fabric (weight not less than 160 Gm per Sqm) unrolled & bonded to substrate with side and end laps 75mm & 100mm as per manufacturer’s instruction and applying over it a tack coat using 85/25 grade industrial hot blown bitumen bitumen @ 1.20 kg per Sqm and finally finished the top of polymeric water proofing membrane with a coat of bituminous aluminum paint @ 0.20 kg per Sqm as per manufacturer’s instructions, complete all as specified & directed.

Supply only integral water proofing compound complete all as specified and directed.

novell engineers

Goel Enterprises

hardeep singh enterprises

SHRI BALA JI STORE

multiple alliance enterprises

M/S YASHCON CONSTRUCTIONS

vipul nagaich