Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹93.0 LAccepted-AOC 05 AYODHYA NAGAR NEAR RAM MANDIR BEHIND HARIYA COLLEGE GOKUL NAGAR JAMNAGAR 361004 | JAMNAGAR | JAMNAGAR | GUJARAT | 361004 | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹95.1 L+₹2.1 L (2.27%)Rejected-Finance BLOCK NO 11 VIMLNATH APARTMENT PRATAP VILAS ROAD NEAR SATYA SAI SCHOOL JAMNAGAR GUJARAT 361008 | JAMNAGAR | JAMNAGAR | GUJARAT | 361008 | L2 | Rejected-Finance Not lowest Bidder | |
| 3 | L3₹97.1 L+₹4.1 L (4.40%)Rejected-Finance | L3 | Rejected-Finance Not lowest Bidder | |
| 4 | L4₹1.0 Cr+₹10.7 L (11.5%)Rejected-Finance | L4 | Rejected-Finance Not lowest Bidder | |
| 5 | L5₹1.2 Cr+₹28.2 L (30.4%)Rejected-Finance INS VALSURA JAMNAGAR | JAMNAGAR | GUJARAT | 360520 | L5 | Rejected-Finance Not lowest Bidder |
Tender Value
₹99.3 L
EMD Value
₹1.7 L
Closing Date
7 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE (AF) Jamnagar
CWE (AF) Jamnagar Air Force Station Jamnagar
ADDN / ALTN / IMPROVEMENT TO MESSES AND LIVING IN ACCN AT AF STN SAMANA UNDER GE (AF) NO 1 JAMNAGAR.
2023_MES_618021_1
81159/CWE/E8
Open Tender
Civil Works
Item Rate
270 days
Jamnagar (Samana)
Class C and category a (i)
7 documents required · 7 mandatory
₹1,000
GE (AF) No 1 Jamnagar
₹1.7 L
Yes
2 Dec 2023
9 Sept 2023
9 Oct 2023
9 Sept 2023
7 Oct 2023
23 Sept 2023
11 Sept 2023 - 15 Sept 2023
Amount
Dismantling of floor, hearth or wall tiling or stone slab laid, bedded & pointed in any mortar including demolition of cement mortar bedding or backing coat, including removal of debries to a distance exc 1.5 km but n.exc 2 km complete all as specified and as directed.
M&L for rendering 10mm thick in CM 1:4 on stone, brick masonry, concrete surface for skirting/dado etc complete all as specified and as directed.
M&L for Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM 1:6 complete all as specified and as directed.
M&L for Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 300X 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and as directed.
M&L for Non skid, coloured ceramic tiles 7 to 8 mm thick (Square / rectangular) polished area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as in floors etc laid over and pointed with coloured cement to match the tiles complete all as specified and as directed.
M&L for Non skid, ceramic tiles 7 to 8 mm thick (Square / rectangular) polished area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm as in floors etc laid over and pointed with coloured cement to match the tiles complete all as specified and as directed.
M&L for Green Marble work 15 to 18 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified and as directed.
M&L 15 -18mm thick granite stone slab of any type (cut, table rubbed and polished)in steps, jambs, pillars, window cills, cooking platforms and like , bedded & jointed with grey cement slurry & pointing with coloured cement using marble dust with admixture of pigment to match with marble shade laid over complete all as specified and as directed.
Rounding to the edge of stone slabs on edge such as platform, steps and other similar situations complete all as specified and as directed.
M&L for Machine cut kata stone slab flooring 18-22mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.
M&L for Kota stone slab 18-22mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.
Taking up or down 15mm dia steel tubing and connections, including complete all as specified and as directed.
Taking up or down 20mm dia steel tubing and connections, including complete all as specified and as directed.
Cutting chases, pinning in, making good to facings on stone concrete, block or slab wall, where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth complete all as specified and as directed.
S&F 20mm bore CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed
S&F 32mm bore CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed
S&F in repair 15mm size angular Stop valves, fancy type, chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.
S&F in repairs fancy type chromium plated, long shank & cup (concealed type) 15mm bore dia Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.
S&F in repair 15mm dia size Bib taps, fancy type, chromium plated , cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.
S&F in repair 15 mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.
S&F in repairs two way bib cock brass chromium plated, fancy type, 15MM bore complete all as specified and as directed.
S&F in repairs two way angle valve brass chromium plated, fancy type,15MM bore complete all as specified and as directed.
S&F in repair vitreous china wash basin, white, flat back, size 550 mm x 400 mm fixed on and including cast iron cantilever bracket 32 mm dia brass waste coupling and including waste fitting and union complete all as specified and as directed.
S&F in repair Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement complete all as specified and as directed.
S & F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum Weight 60gms) incl. all accessories / fittings etc complete all as specified and as directed.
S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed.
S & F in repair Low density polyethylene pipes (LDPE) 32mm of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc
S&F in repair brass chromium plated shower rose 125 mm of size with arm and with or without swivel joints to steel pipe or union complete all as specified and as directed.
S&F in repairs sinks with drainage board made of stainless steel 1 mm thick, kitchen or laboratory, with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including supply & fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete as specified and directed.
S & F in repair Tubular towel rail, 20mm dia, D type, 600mm long between flanges chromium plated complete all as specified and as directed.
S&F in repair Towel Ring of PTMT fixed with and including chromium plated brass screws and wooden/ plastic cleats etc complete all as specified and as directed.
S&F in repair vitreous china wash down water closet pan (pedestal pattern) white with CI 'P' or 'S' trap incl water closet seat cover of plastic, jet etc. Complete incl necessary PVC waste pipe fitting, complete all as specified and as directed.
S & F in repairs vitreous China squatting pan of Orrissa pattern of approved make of size 580 mm X 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe incl lime concrete bedding and connection to anti syphonage pipe etc including making good to floor complete all as specified and as directed.
S&F in repair 10 Litre capacity PVC symphonic action type flushing cistern, duel flush type (ISI Marked) low level with inlet ball valve, float and handle & PVC flush pipe, fixed in position and connecting complete all as specified and as directed.
S&F in repairs PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified and as directed.
S&F in repair chromium plated soap tray any type and fixed to plugs on wall with chromium plated brass screws complete all as specified and as directed.
S&F in repair chromium plated grating 100mm size with or w/o waste hole complete all as specified and directed
Dismantling and disconnecting of existing cast iron or reinforced concrete drain pipes, jointed in cement mortar 75/100 mm dia bore fixed to wall, laid in trenches complete all as specified and as directed.
S&F PVC (SWR) pipes 75mm dia single socketed in any length with rubber ring joints fixed on walls including clamp complete all as specified and directed
S&F PVC (SWR) pipes 75mm dia single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed
S & F 75 mm bore of pipe PVC (SWR) bends of any radius / shoe fixed to PVC pipes in repair complete all as specified and as directed.
S & F 75 mm bore of pipe PVC (SWR) bends of any radius / shoe fixed to PVC pipes provided with access door in repair complete all as specified and as directed.
S & F 75 mm bore of pipe PVC (SWR) branch piece, single (single Y) equal or unequal fixed to PVC pipes with access door in repair complete all as specified and as directed.
S & F 75 mm bore of pipe PVC (SWR) branch piece, double (double Y) equal or unequal fixed to PVC pipes with access door in repair complete all as specified and as directed.
S & F 75 mm bore of pipe PVC (SWR) junction single,(Single T) equal or unequal fixed to PVC pipes with access door in repair complete all as specified and as directed.
M&L for 75 mm dia of PVC (SWR) floor trap plain with grating including jointing with solvent cement in repair complete all as specified and as directed.
S&F PVC (SWR) pipes 110mm dia single socketed in any length with rubber ring joints fixed on walls including clamp complete all as specified and directed
S&F PVC (SWR) pipes 110mm dia single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed
S & F 110 mm bore of pipe PVC (SWR) bends of any radius / shoe fixed to PVC pipes in repair complete all as specified and as directed.
S & F 110 mm bore of pipe PVC (SWR) bends of any radius / shoe fixed to PVC pipes provided with access door in repair complete all as specified and as directed.
S & F 110 mm bore of pipe PVC (SWR) branch piece, single (single Y) equal or unequal fixed to PVC pipes with access door in repair complete all as specified and as directed.
S & F 110 mm bore of pipe PVC (SWR) junction single, (Single T) equal or unequal fixed to PVC pipes with access door in repair complete all as specified and as directed.
S & F 110 mm bore of pipe PVC (SWR) branch piece, double (double Y) equal or unequal fixed to PVC pipes with access door in repair complete all as specified and as directed.
S & F 110 mm bore of pipe PVC vent cowl fixed to PVC pipes in repair complete all as specified and as directed.
Demolition of cement concrete in ground floor and paving's not exc 15cm thickness below or above ground level, complete all as specified and as directed.
M&L for 75mm thick cement concrete Type D2 ( 1:4:8) using 40mm graded stone aggregate as in subbase complete all as specified and as directed.
M&L for 75 mm thick Cement concrete type B- 2, 1:2:4 (40mm graded aggregate) as plinth protection /hardstanding etc complete all as specified and as directed.
Excavation in trenches n.exc 1.50 mtr wide and n.exc 1.50 mtr in depth for foundation etc or shafts, wells cesspits, manholes, pier holes etc n.exc 10 sqm on plan and getting out in Hard/dense soil complete all as specified and as directed.
Returning filling in including spreading, levelling, watering and well ramming in layer n.exc 25cm in layer complete all as specified and as directed.
Removing excavated soil to a distance exceeding n.exc 1.50 km and depositing where directed at a level n.exc 1.50 mtr above the starting point complete all as specified and as directed.
Demolition of brick / stone / PCC block masonry / RCC Jalli fixed in cement mortar including all quoins, pillars, arches etc. all as specified and as directed.
M & L for precast cement concrete (1:3:6) (using 20mm graded stone aggregate) solid building blocks exe 10 cm thick, in width (with plain or inter locking joints as directed) setting in CM 1:6 complete in wall or pillars complete all as specified and as directed.
M&L precast cement concrete Type C-0,1:3:6 (12.5mm graded aggregate) louvres and jallies, 35mm thick (measured solid), set in cement mortar 1:6, including all mouldings etc complete all as specified and directed by Engineer-in-Charge
Demolition of RCC of any description such as Kitchen chimniy, chajja, shelves, OHT Tanks, Pillar, wall, column. Beam etc and in any position not other wise specially provided for complete all as specified and directed by Engineer in Charge (reinforcement cut as required to facilitate demolition) (Note:- Quoted rate deemed to carryout wk at height up to 8.00 metre.)
M&L Reinforcement cement concrete type B-1 1:2:4 using 20mm aggregate as in slab supported on walls beams and columns in floor, roof, landing and in shelves, chajja, lintel and similar wks complete all as specified and as directed. (Note:- Quoted rate deemed to carryout wk at height up to 8.00 metre.)
M&L for Mild steel corrosion resistance steel TMT reinforcement bars of grade Fe-500 / 550D, 10 mm dia and over cut to length and bent to shape required including cranking, bending spirally for hoping for columns, hooking end and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed.
M&L for Mild steel corrosion resistence steel TMT reinforcement bars of grade Fe-500 / 550D, 6mm to 8mm dia and over cut to length and bent to shape required including cranking, bending spirally for hoping for columns, hooking end and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed.
M&L for Mild steel corrosion resistence steel TMT reinforcement bars of grade Fe-500 / 550D, 5 mm dia and over upto and incld 10mm dia in stirrups, cut to length, bent to shape required, including cranking, bending spirally for hooping for beam, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and as directed.
Use and waste of Form work to soffits of suspended slab such as roof slab, floor slab , landing, chajjas, lintel and similar work for rough finish surface.complete all as specified and as directed. (Note:- Quoted rate deemed to carryout wk at height up to 8.00 metre.)
Demolition of cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.
M&L Applying coating (02 coats) of Pidifin 2k (of Make Dr Fixit or equivalent) @ (not less than) 1.54 kg/ Sqm in two coats on sunken surfaces of toilet & bathroom and similar situation all as recommended by manufacturers complete all as specified and as directed.
M&L for PCC 1:2:4 type B-1( using 20 mm graded stone aggregate) in coping, sunken portion, roof kerbs or mud stops, rounded or chamfered on edges etc including necessary form work complete all as spd and directed
M&L for PCC 1:5:10 type E-2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete etc complete all as specified and as directed.
S&F for 60cm long, 40mm dia Tubes medium grade galvanised with all fitting laid in wall for sunken for complete all as specified and as directed.
M&L for complete removal of existing treatment of any thickness laid over RCC/Roof chajja cleaning and washing of roof with water to remove dust etc as preparation to receive treatment, brooming down or steel wire brushing, scraping down smoke soot, mouls, moss and efflorescent salts and treating oil and greasy spots complete all as specified and as directed.
M&L for PCC in roof padding, coving, filling and mass concrete type B-O, 1:2;4 (using 12.5mm graded stone aggregate) complete all as specified and directed
M&L for plastering 10mm thick on concrete surface in CM 1:3, finishing the surface even and smooth without using extra cement, including mixing only liquid water proofing compound as per manufacture instruction complete all as specified and directed. (Note: WPC will be measured & paid separately.)
Supply only liquid water proofing chemical @ 200ml/Bag of cement complete all as specified and directed.
M&L for cleaning of all loose dirt and dust from roof and priming the surface with one coat of cold applied glass fibre base bituminous felt primer @ 0.25 Kg/Sqm conforming to IS : 3384 and applying a layer of APP based polymeric membrane not less than 3mm thick weighing not less than 3.50 Kg/Sqm, reinforced with polyester non woven fabric (weighing not less than 150 gms/Sqm) and upper side of membrane thermally insulated with white gravel finish uniformly embedded during manufacturing process. It shall be laid by torch application having side over lap 75 mm and at the end 100 mm, all overlaps and joints shall be sealed by torch application, complete all as specified and as directed. (Note: (i) Coved fillets in PCC(1:2:4) type B-0 using 12.5mm graded stone aggregate, of radius 75mm shall be provided at the junction of roof and parapet wall/mumty/chimney/other vertical surfaces and there-after surface painted with hot paving bitumen of Grade 30/40 confirming to IS-73, [email protected] Kg/sqm over a coat of bituminous primer confirming to IS-3384 applied @ 0.25 Kg/sqm. Note Continue below:-
(ii) Polymeric membrane shall be taken to a height of 45cm (minimum) and then inserted inside the groove of parapet wall of brick / stone masonry and shall be finished by a membrane flushing. (iii) The water proofing treatment shall be got carried out by the manufacturer or their authorized applicators. (iv) In case of stone masonry parapet wall etc a groove of size 25mmx25mm(minimum) shall be made in coved fillet at the junction of roof and parapet wall/mumty Chimney/other vertical surfaces and polymeric membrane inserted in groove and sealed with paving bitumen. (v) Above aspects are deemed to be included in quoted rate. (vii) The net area of water proofing treatment shall be measured without any extra allowance for laps & portion inserted in groove which shall be deemed included in the quoted rates.)
Taking down cement plaster in cement or cement lime mortar on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc, including removal of debries to a distance exc 1.5 km but n.exc 2 Km, complete all as specified and as directed. (Note: Quoted rates deemed to include working at height up to 9 Meters with provision of scafloding and safety arrangements.)
M&L for 2 or more coat of wall care putty over plastered surface of wall and sanding with sand paper to prepare the surface even and smooth complete all as specified and as directed.
M&L for rendering 15 mm thick on stone masonry / brick / concrete surface of walls in cement mortar 1:6 finished even & smooth without extra cement complete all as specified and as directed.
M &L for 2 coats of oil bound distemper on new surfaces of walls including preparation to distempering to match with existing work complete all as specified and as directed.
M&L for 2 or more coat of wall care putty over plastered surface of ceiling and sanding with sand paper to prepare the surface even and smooth complete all as specified and as directed.
M & L for rendering 10 mm thick in patches on fair faces of brick or concrete surfaces in CM 1:3 as on ceiling, facia roof projection etc finished even and smooth without using extra cement complete all as specified and as directed.
M &L for 2 coats of oil bound distemper on new surfaces of ceiling including preparation to distempering to match with existing work complete all as specified and directed
M&L for rendering 15 mm to 20mm thick on stone masonry/brick / concrete surface of walls in cement mortar 1:4 finished even & smooth without extra cement complete all as specified and as directed. (Note:- Quoted rate deemed to carryout wk at height up to 9.00 metre.)
Complete removal of existing treatment on wall (any number of layers) by scrapping with steel wire brushes or any other means and remove vegetable/plants roots from walls / Chajjas etc complete all as specified and as directed (Note:- Quoted rate deemed to carryout wk at height upto 8.00 m)
Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over surfaces walls/fins/facia/soffit etc complete all as specified and as directed (Note:- Quoted rate deemed to carryout wk at height upto 8.00 m)
M&L for Preparation of new or previously untreated brick stone, concrete, asbestos surfaces over 10cm girth or width, not otherwise described and applying Two coat of synthetic enamel paint all as specified and as directed .
M&L for Preparation of old distempered / decorated surfaces of walls Washing, rubbing down and stopping of distempered and painted surfaces and applying Two coat of distemper oil emulsion complete as specified and directed.
M&L for Preparation of old distempered / decorated surfaces of ceiling Washing, rubbing down and stopping of distempered and painted surfaces and applying Two coat of Distemper oil emulsion complete as specified and as directed.
S&F in repair aluminium three track Powder coated of any colour ( thickness of powder coating not less than 50 micron) sliding window with three sliding shutter , the size of outer frame three track 92 x 31.5x 1.20mm ( using two track for glazed window shutter and one track for wire gauged ) , the section shutter size 37x 18x 1.2mm) and glazing with 4 mm thick glass ( plain/floated) including all-around suitable rubber gasket and MS wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4mm and fixed on aluminium flat and inserted in the frame of shutter with tracking arrangement each sliding window shall be provided with one number handle including locking arrangement & 2 numbers' sliding rollers of nylon with including all necessary fittings complete all as specified and as directed.
S&F aluminium powder coated of any colour ( thickness of powder coating not less than 50 micron) frame for door, window and ventilators or similar wk with one or more rebate inc joining cleat for fixing in repair complete all as specified and as directed.
S&F aluminium door shutters powder coated of any colour ( thickness of powder coating not less than 50 micron), aluminium section weighing min. 0.55 Kg/m including necessary joining cleats, glazing clips, rubbers packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc in repair complete all as specified and as directed
S&F aluminium window powder coated of any colour ( thickness of powder coating not less than 50 micron)and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) in repair complete all as specified and as directed
S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, complete all as specified and as directed
S&F powder coated anodised Aluminium ventilator with fixed aluminium frame of size 60mmx40mmx1.98mm fixed in vertical and horizontal position with aluminium members and half portion to be provided with aluminium heavy duty adjustable louvers and 4mm thick pinhead glass and remaining portion to be louvered using 4mm thick pinhead glass and louvered portion covered with stainless steel wire cloth 0.45mm dia of f wire and average width of aperture 1.40mm incl Aluminium grill (deco grill Design no 20) and F/h type frame, rubber neoprene packing, anodised aluminium snap beading, screws, complete all as specified and as shown on drawing Note : Rates include all glazing/aluminium wire cloth, rubber packing, joining, cleats, glazing clips, aluminium beading grill louvers etc.
S&F sheet glass 3 mm thick ordinary quality(sheet glass is ground or obscured or frosted, on one side) and fixed in Aluminium window/ventilator in square n.exc. 0.5 sqm in each pane complete all as specified & directed.
S&F sheet glass 3 mm thick ordinary quality) and fixed in Aluminium window in square n. exc. 0.5 sqm in each pane complete all as specified & directed.
S&F sheet glass 4 mm thick ordinary quality) and fixed in Aluminium window in square exc. 0.5 sqm in each pane complete all as specified & directed.
S&F 18/19 mm thick, Block boards, grade 2 quality, interior grade, commercial type, fixed with screws to timber /iron frame-work complete all as specified & directed.
M & L Second class hard wood (hollock) plain fillets of Sectional area not exceeding 3 Sq. cm, square, rectangular or triangular in section, wrought, secured with head less nails or brads, complete all as specified
M& L Decorative laminate type 1 of surface finish 0.9 mm thick shade and pattern as approved Fixed with approved adhesive as per manufacture's instruction compete all as specified
M & L Second class hard-wood in scantlings in timber frame wk fixed compete all as specified
S&F Moulding second class hardwood, sectional area n exc. 6 sq. cm as in cornices, picture rails and the like complete all as specified & directed.
S & F Continuous (piano) hinges, stainless steel, width of flaps (when open) is 30 mm bright finish or electrogalvanized complete all as specified & directed.
S& F for Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified & directed.
S&F 75 mm in size aluminium handles cast type anodized complete all as specified & directed.
S&F Hasp and staple, safety type 100 mm, of aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified & directed.
Taking down chowkats or frame with shutter of any description (without taking out shutter from the frame) not exceeding 1.50 sqm each and removal from site complete all as specified and directed Engineer-in-Charge
S & F for Factory Made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube fixed in opening complete as per manufacturer's specifications and as directed.
S&F Factory Made Solid PVC Moulded Door Shutter with wood free EPS core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face supplying & fixing in frame at site as per specification & drawing, complete all as specified and directed
Taking down chowkhats or frame exc 1.5 Sqm but n.exc 4 Sqm each with shutters of any description (W/out taking off shutters from the frames) and removal from site complete all as specified and directed Engineer-in-Charge
Taking down shutter of any description n exc 1.00 sqm each and removal from site complete all as specified and directed by Engineer-in-Charge
Taking down shutter of any description exc 1.00 sqm and n exc 2.00 sqm each and removal from site complete all as specified and directed by Engineer-in-Charge
Taking down shutter of any description exc 1.00 sqm and n exc 2.00 sqm each and Refixing of shutters in same opening after resecuring or easing & adjusting, complete all as specified and directed by Engineer-in-Charge
S&F 2nd class hard wood , Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed
S&F 35 mm thick second class hardwood Glazed and skeleton door shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass / gauge, etc., sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a), fitted to chowkats complete all as specified and directed by Engineer-in-Charge
S&F 2nd class HW 35mm thick Plain, framed,panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed Engineer-in-Charge
S&F 100 mm size Butt hinges, stainless steel complete all as specified & directed.
S&F 75 mm size Butt hinges, stainless steel complete all as specified & directed.
S&F 150 mm long aluminium anodized barrel tower bolts of extruded section complete all as specified & directed.
S&F 125 mm in size aluminium handles cast type anodized complete all as specified & directed.
S & F 250 mm mild steel sliding bolt plate type stove enamelled black with bright bolt not less than 12 mm dia with and including a minium of 6 bolts and nuts four on bolt plate and two on stapple plate and fixed complete all as specified and directed by Engineer-in-Charge
S & F stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks ro galvanised wire stapple complete all as specified and directed by Engineer-in-Charge
S&F 200mm, ordinary MS rat tail rod pattern springs including roller and roller plate complete all as specified & directed.
Dismantling wall and ceiling board (fibre, pulp, insulation, etc.) or insulation boards / block boards / decorative laminate/ beads / timber etc any thickness, any description including cover fillets etc complete all as specified & directed.
S&F 4mm thick false ceiling of Non asbestos fibre cement building boards and including anodised aluminium snap grid frame work of T section (main & cross member) of size 25 mm x 25 mm x 1.5 mm thick in square pattern of grid size 605mm X 605mm. The aluminium frame work will be supported on side wall with the use of aluminium 'L' section of size 25 mm x 25 mm x 1.5 angles etc. Snap grid shall be supported with hangers of 4 mm dia. Galvanised iron wire adjusting level fixed to roof slabs / truss etc by means of ceiling cleats made out of Galvanised iron flat of size 40 x 3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia 40 mm long, complete all as specified and as directed.
S&F in repair Curtain rod, mild steel, chromium plated with and including fixing brackets, stops, rollers etc complete all as specified & directed.
M&L for preparing new surfaces of wood or wood based materials of any description not other wise described over 10 CM width or girth new or previously un treated wooden surfaces and applying one coat of pink primer and two coat of synthetic enamel paint complete all as specified & directed.
S&F in repair 100 mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified & directed.
S&F in repair 150 mm long aluminium anodized barrel tower bolts of extruded section complete all as specified & directed.
S&F in repair 125 mm in size aluminium handles cast type anodized complete all as specified & directed.
S & F in repair 250 mm mild steel sliding bolt plate type stove enamelled black with bright bolt not less than 12 mm dia with and including a minium of 6 bolts and nuts four on bolt plate and two on stapple plate and fixed complete all as specified and as directed.
S & F in repair stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks ro galvanised wire stapple complete all as specified and directed by Engineer-in-Charge
S&F in repair Hasp and staple, safety type 100 mm, of aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws
S & F in repair Continuous (piano) hinges, stainless steel, width of flaps (when open) is 30 mm bright finish or electrogalvanized
S&F in repair 200mm, ordinary MS rat tail rod pattern springs including roller and roller plate complete all as specified & directed.
M&L for Cutting holes in brick/stone walls built in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4, depth of embedded portion of holdfasts or lugs measured from the face of the jamb into the wall exc half brick but not exc one brick complete all as specified & directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified & directed.
S&F mild steel framed work such as grills, gratings etc with ends of bars shouldered and / or riveted or forged into spiked, framed guard bars, iron doors, ladders, framed blasters, walkways, railings, framework of water tanks and similar work conforming to Fe 290 Grade E-165 complete all as specified & directed.
M&L for chequered cement concrete tile with grey cement and pigment (of approved tint) of size 20 cm x 20 cm x 25 mm thick , set, jointed and pointed in neat cement slurry complete.
M&L for preparation of new steel surfaces over 10 cm in width or girth and applying two coat of synthetic enamel paint over one coat of red oxide complete all as specified & directed.
M&L for preparation of old painted steel surfaces, exc 10 cm width or girth and applying one coat of synthetic enamel paint etc complete all as specified & directed.
M&L for preparation of old painted wooden surfaces, exc 10 cm width or girth and applying one coat of synthetic enamel paint all complete all as specified & directed.
Dismantling water tanks exc 250 Ltr and n.exc 500 Ltr and removing to store complete all as spd and directed
S&F 500 litres capacity double layer, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position over existing PCC platform incl all fitting such as connection pieces with GI tank nipple for inlet, outlet, etc complete all as specified and directed
Dismantling water tanks exc 500 Ltr and n.exc 1000 Ltr and removing to store complete all as spd and directed
S&F 1000 litres capacity double layer, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position over existing PCC platform incl all fitting such as connection pieces with GI tank nipple for inlet, outlet, etc complete all as specified and directed
S&F in repair 25mm dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed
S&F in repair gun metal gate valves with iron wheel head 32mm complete all as specified and directed by Engineer-in-Charge
Taking down carefully any type of point wiring (light / fan / socket or power) along with old conduit/ cassing capping complete including fitting such as switches, ceiling roses, socket, light fittings, regulators etc complete and making good disturbed surfaces of walls, floors and making good disturbed surfaces to the existing surface complete.
Taking down carefully sub main wiring complete of any type (batten / surface conduit) complete and making good disturbed surfaces complete all as specified and directed.
Taking down Distribution boxes any type with all its related accessories as directed by Engineer-In-Charge.
M & L for point wiring complete with 1.5 sqmm single core multistranded copper conductor FRLS, PVC insulated and unsheathed cable 650 /1100 volts grade drawn through & including super deluxe casing capping (not less than 25 mm wide) with all its accessories like bends, tees, suitable module PVC boxes etc fix on wall or ceiling surfaces all as specified including 1.5 sqmm , FRLS type , copper multistranded cable as earth wire and plastic laminated PVC box with cover plate complete all as specified and as directed.
(a) One light / fan / exhaust fan point controlled by one, one way switch.
(b) One light point controlled by two, two way switch
(c) One 3 pin socket out let 5 Amps on same board with other switches.
(d) One 3 pin socket out let 5 Amps on the independent board.
Ditto- all as per item No 157 above but with 4.0 sqmm multistranded copper multistranded conductor FRLS cable with 4 sqmm earth wire for one 6 pin socket outlet 15 amps on independent board as specified and as directed.
S & F switch Piano 5 Amps, flush button type, SP, one way, 230 Volts complete all as specified and as directed.
S & F switch Piano 5 Amps, flush button type, SP, two way, 230 Volts ccomplete all as specified and as directed.
S & F Switch socket combination multipurpose 5 pin 5 Amps, flush type 230 / 250 Volts complete all as specified and as directed.
S & F switch socket combination ,6 pin ,15 amps, flush type, multipurpose, 230 / 250 volts complete all as specified and as directed.
M&L for Ceiling rose, 3 terminal polycarbonate body 6 Amps, 250 volts AC, including connecting complete all as specified and as directed.
M & L for sub main wiring with two single core PVC insulated and unsheathed cable 6.0 sqmm with multi stranded copper conductor , FRLS type cable drawn through and including casing and capping complete with all accessories along with provn of 4.0 sqmm PVC insulated and unsheathed ,multi stranded copper conductor , FRLS type cable as earth wire and connecting to the BD with proper size of lugs/thimbles etc complete all as specified and as directed.
Supply and fix sheet metal enclosure MCB DB, single pole and neutral, 8 ways double door 240 volts having 200 Amps rated bus bar with balnking plates wherever required and degree of protection I.P 43 -IK 09 with acrylic cover as including all connections complete all as specified and as directed.
Supply and fix sheet metal enclosure MCB DB, triple pole and neutral, 4 ways double door 415 volts having 200 Amps double door rated bus bar with blanking plates wherever required and degree of protection I.P 43 -IK 09 with acrylic cover as including all connections complete all as specified and as directed.
Supply and fix MCB single pole 240 volts 6 to 32 Amps (to be fixed as per load requirement) 240V with 'C' curve complete as including all connections testing and commissioning complete all as specified and as directed.
Supply and fix MCB Single pole Neutral 240 volts 40- 63 Amps (to be fixed as per load requirement) 240V with 'C' curve complete as including all connections testing and commissioning complete all as specified and as directed.
Supply and fix MCB’s triple pole & neutral, 63 Amps, 415 volts with ‘C’ curve, fixed in sheet metal board complete including connecting complete all as specified and as directed.
Taking down Ceiling fan/exhaust fan with cover plate , sealing cable end, dismantling blades and removing fan and blade for painting of ceiling fan/Exhaust fan complete with synthetic enamel paint black/ white by spraying including filling of cavities with filler, one coat after cleaning all rust and dust etc complete and refixing the same with 0.5 sqmm, flexible, three core wire, copper conductor cable complete all as specified and as directed.
Supply and fix stepped type electronic fan regulator flush type, 230 V, including connecting complete all as specified and as directed.
Supply & Fix energy efficient LED tube light fitting with built in LED & integral LED driver 20 watt, channel housing & diffuser of length 1200 mm (approx.) with all accessories, fixing arrangement internally pre-wired, fixed in position & connecting complete all as specified and directed by Engg –in-charge.
S&F energy efficient LED tube light fitting with built in LED & integral LED driver 8 to 10 watt, channel housing & diffuser of length 600 mm (approx.) with all accessories, fixing arrangement internally pre-wired, fixed in position & connecting complete all as specified and directed by Engg –in-charge.
S&F energy efficient LED tube light fitting with built in LED & integral LED driver 5 watt, channel housing & diffuser of length with all accessories, fixing arrangement internally pre-wired, fixed in position & connecting complete all as specified and directed by Engg –in-charge.
Supply and fix Energy efficient recessed mounted LED luminaries 36watt suitable for 600 x 600 mm grid ceiling along with flat diffuser along with constant current electronic driver complete all as specified and as directed.
S & F in plastic body exhaust fan size 200 mm sweep, single phase, 1200 RPM, ISI marked, including louvers , with connection from ceiling rose with 0.5 Sqmm flexible three core wire complete in wall/window including making hole in surface and re surfacing it as complete all as specified and as directed.
S&F LED building security light fitting 35 Watt, system efficiency not less than 100 lumen / Watt, IP66 protection, consisting of high / low voltage cut off, maintenance free isolated Electronic driver circuits, Low THD, PMMA grade high quality Transmittance lens, Epoxy powder coated Die Cast Aluminium housing with weather proof gasket for lamp & driver compartment, Heat resistance toughened glass fitted in cast aluminium housing with SS screws, pipe, bracket on building, complete all as specified and as directed.
M & L for sub main wiring with two single core PVC insulated and unsheathed cable 2.5 sqmm with multi stranded copper conductor , FRLS type cable drawn through and including PVC conduit complete with all accessories along with provn of 2.5 sqmm PVC insulated and unsheathed ,multi stranded copper conductor , FRLS type cable as earth wire and connecting to the BD with proper size of lugs/thimbles etc complete all as specified and directed.
Supply and fixing Recessed mounted LED round panel light panel light of 16 watt,220 V AC,6500 K AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers,holders,LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by engineer in charge
Material and labour of earthing complete with galvanized iron earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m deep below normal ground connected to galvanized steel wire 4 mm dia by means of bolts nuts check nuts and washer of galvanized steel, watering pipe of 20 mm bore, galvanised iron, light grade, and 15 mm bore galvanised iron light grade for earth wire protection including all excavation earth work in any type of soil, PCC pit in PCC 1:2:4 type B-1 and RCC 1:2:4, type B1 for precast chamber cover 50 mm thick, reinforced with welded steel wire fabric or XPM Jali (weight not less than 4.00 Kg / sqm), with charcoal, salt, funnel complete all as shown in the electrical plate No 3 of SSR part –I and testing on completion including taking up/down old earthing. .
Nirmal Construction
S t modi
SONU INFRATECH LTD
JAMNAGAR ELECTRIC AND MACHINERY CO
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .