Construction of E type 01 Residential Quarter for Judicial Officer at Dediapada, Dist. Narmada at Rajpipla

Name of Work : Construction of E type 01 Residential Quarter for Judicial Officer at Dediapada, Dist. Narmada at

BILL OF QUANTITIES

Item Description of Item (with brief specification and reference to book of Quantity Unit Rate Amount

No. specifications)

1 Excavation for foundation up to 1.50 MT depth including sorting out and stacking of useful 426.00 Cu.M 117.08

materials and disposing the excavated stuff up to 50 mt lead (A) Loose & soft soil

2 Excavation for foundation for depth from 1.5 m to 3.0 m including sorting out and 117.00 Cu.M 162.38

stacking of useful materials and disposing off the excavated stuff upto 50 Meter

lead. (B) Dense or Hard soil

3 Filling in plinth with sand under floors including watering ramming, consolidating and 59.00 Cu.M 460.19

dressing etc. complete.

4 Filling available excavated Earth (Excluding Rock ) in trench plinth side of foundation etc. in 270.00 Cu.M 130.39

layer not excluding 20 cm in depth consolidation each deposited layer by ramming and

watering etc. complete

5 Filling in foundation and plinth with murrum or selected soil in layers of 20cm. thickness 30.00 Cu.M 289.06

including watering, ramming and consolidating etc. complete.

6 Providing and laying cement concrete 1:4:8 (1cement : 4 coarse sand : 8 B.T. stone 30.00 Cu.M 2728.01

aggregates 40 mm. nominal size) and curing complete excluding cost of from work in :(a)

Foundation and plinth

7 Providing and laying controlled cement concrete M150 for curing complete including cost of 83.00 Cu.M 3887.31

formwork but excluding the cost of reinforcement for reinforced concrete work in (A)

Foundations, footings,Base of columns,Plinth Slab and Mass concrete.

8 Providing and laying controlled cement concrete M250 for curing complete including cost of 93.00 Cu.M 4331.11

formwork but excluding the cost of reinforcement for reinforced concrete work in (A)

Foundations, footings,Base of columns and Mass concrete.

9 Providing and laying controlled cement concrete M200 and curing complete including the 7.00 Cu.M 7598.09

cost of form work but excluding the cost of reinforcement for reinforced concrete work in

Columns, pillars posts and struts Column Up to Plinth Level

10 Providing and laying controlled cement concrete M-200 and curing complete including the 21.00 Cu.M 7625.40

cost of form work but excluding the cost of reinforcement for reinforced concrete work in

Columns, pillars, posts and struts up to floor two level for Columns For All Floors.

11 Providing and laying controlled cement concrete M200 and curing complete including the 30.00 Cu.M 5583.28

cost of form work but excluding the cost of reinforcement for reinforced concrete work For

12 Providing and laying controlled cement concrete M200 and curing complete including the 34.00 Cu.M 5930.72

cost of form work but excluding the cost of reinforcement for reinforced concrete work in

BEAMS For All Floor.

13 Providing and laying controlled cement concrete M200 and curing complete including the 33.00 Cum 6082.22

cost of form work but excluding the cost of reinforcement for reinforced concrete work for

Slab All floors

14 Providing and laying controlled cement concrete M-200 and curing complete including the 5.00 Cu.M 7093.23

cost of form work but excluding the cost of reinforcement for reinforced concrete work For

Lintels in All Floors

15 Providing and laying controlled cement concrete M-200 and curing complete including the 4.00 Cu.M 5936.78

cost of form work but excluding the cost of reinforcement for reinforced concrete work For

Chajja in All Floors

16 Providing and laying controlled cement concrete M-200 and curing complete including the 8.00 Cu.M 13642.07

cost of form work but excluding the cost of reinforcement for reinforced concrete work For

Stair in All Floors

17 Providing TMT bar reinforcement of Fe-500D for R.C.C. work including bending binding 24616.00 Kg. 76.76

and placing in position complete for All Floor

18 Proving & Fixing Chicken mesh for joint between brick work & RCC work fixing with nail & 64.00 Sq.M 74.74

GI washer as per director in Charge

19 Brick Work using Common Burnt Clay Building Bricks having crushing strength not less than 117.00 Cu.M 4135.76

35 Kg/sm. in super structure Above plinth level up to floor two level in cement mortar (1:6)

( 1 cement : 6 fine sand) (Conventional) For All Floors

20 Half brick masonry in common brunt clay building bricks having crushing strength not less 65.00 Sq.M 656.50

than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 -coarse sand ) in super structure

above plinth up to floor two level Conventional Bricks for All Floors.

21 Providing throating or plaster drip and moulding to R.C.C. chhajja by making 5mm to 15 mm 40.00 Rmt 41.00

wide groove as per design etc. complete

22 Providing 15 mm thick cement plaster by using Ready Mix Mortar for plaster in single coat 340.00 Sq.M 180.79

on rough (similar) side of single or half brick walls for interior plastering upto floor two level

and finished even and smooth in Cement mortar 1:4 (1 Cement : 4 sand) for All Floors

23 Providing 10mm thick cement plaster (mala troweled finish) in single coat on Celling,& 362.00 Sq.M 174.73

Soffits of Stair, concrete wall for interior plastering finished even and smooth in (ii) cement

mortar 1:3 (1 Cement : 3 Sand) For ALL Floors

24 20 mm thick Sand faced Gutka cement plaster with 1x1 cm grooves as suggested by this 1017.00 Sq.M 329.28

office consisting of 12 mm thick backing coat of C.M. 1:3 ( 1 cement : 3 coarse sand ) and

mm thick finishing coat of C.M. 1:1 ( 1 cement : 1 coarse sand) for all heights as directed

25 Providing Water proofing Treatment on Sunk Slab including cement concrete flooring 1:2:4 11.00 Sq.M 349.46

(1-cement : 2-coarse sand : 4-graded stone aggregate 20mm nominal size) laid in one layer

and finished with a floating coat of neat cement average 50mm thick to Prepare slope

including water proofing chemical etc. Complete for Sunk Slab All Floor.

26 Providing and fixing G.I. Rain water spout of 50mm dia. and 30cm. Length for Sunk Slab or 30.00 No 101.91

as directed by Engineer in Charge etc complete.

27 Applying two coats of putty & one coats of primer of approved brand and manufacture on 702.00 Sq.M 40.59

new wall surface to give an even shade including thoroughly brushing the surface free from

mortar dropping and other foreign matter and sand papered smooth.

28 Wall painting (three coats) of plastic paint with one wall highlight in special effect (royal 340.00 Sq.M 119.42

play) colour, shade and colour of approved brand and manufacture on undecorated wall

surface to give an even shade including throughly brushing the surface free from mortar

droppings and other foreign matter and sand papered smooth.

29 Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on 362.00 Sq.M 124.68

ceiling and soffits of slab surface to give an even shade including throughly brushing the

surface free from mortar droppings and other foreign matter and sand papered smooth.

30 Wall painting two coats with weather proof acralic emulsion APEX type paint of approved 1017.00 Sq.M 114.46

brand & manufacture and of required shade on exterior wall surface to give an even shade

over and including a primery coat with alkaly resistance primer of approved brand after

throughly brushing surface to remove all dirt and remains of loose powdered materials etc

comp. for all height.

31 Providing and fixing 60 x 60 CM Machine cut, free edges, mirror polished Blue Kotah stone 16.00 Sq.M 1147.36

slab flooring 25 mm thick laid on 20 mm thick cement mortar 1:6 ( 1 cement:6 coarse sand)

jointed with matching pigment & cement slurry including rubbing and polishing finishing

32 Providing and fixing 60 x 60 CM Machine cut, free edges Blue Kotah stone slab flooring 25 3.00 Sq.M 1121.48

mm thick laid on 10 mm thick cement mortar 1:3 ( 1 cement:3 coarse sand) for Skirting &

Riser including jointed with matching pigment & cement slurry including rubbing and

polishing finishing etc. complete.

33 Providing and laying Machine Cut free edges, Machine polished Granite Stone slab 18 mm 42.00 Sq.M 4942.94

thick single peace For Stair,Steps,landing as per design incl. full moulded round front edge

and 1cm nosing and necessary groove on trade of steps laid on 20 mm thick cement mortar

1:6 (1 -cement : 6 coarse sand ) jointed with grey cement slurry including rubbing,polishing

& Finishing etc. complete

34 Providing and fixing machine cut, free edges, pre mirror polished Granite stone slab 18 mm 113.00 Sq.M 3331.99

thick (single piece not less than 150 cm ) for vertical wall/Doors/Windows Sill,Jams for

cladding as per design including full moulded round inside edge and laid on 10 mm thick

cement mortar 1:3 ( 1 cement: 3 coarse sand) jointed with grey cement slurry including

rubbing and polishing finishing etc. complete.

35 Providing and laying coloured matt finished Anti skid ceramic tiles of the size 300 mm x 300 11.00 Sq.M 957.63

mm in skirting, risers of steps and landing laid on a bed of 12 mm thick cement mortar 1:3(1-

cement:3-coarse sand)finishing with flush pointing in white cement etc. complete. Colour

and Shade approved by Engineer-In-Charge

36 Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in flooring treads of steps 89.00 Sq.M 1073.13

and landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3-coarse sand )

finishing with flush pointing in white cement.

37 P & L glazed tiles size 30 x 45 cm 6 mm thick in skirting risers of steps and dedo on 10 mm 36.00 Sq.M 1417.36

thick cement plaster 1:3 (1-cement:3coarse sand) and jointed with colour cement slurry

37A Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in skrting risers of steps and 4.00 Sq.M 1141.45

dedo on 10mm thick cement plaster 1:3(1-cement : 3-coarse sand) and jointed with white

38 Providing and laying water proofing treatment with china mosaic tiles flooring over avg 50 100.00 Sq.M 1107.97

mm C.C. 1:2:4 bedding for maintaining slope for plain and curve surface & 12 mm to 20 mm

of broken piece not more than 2.5CM of ceramic / glazed tiles ( one for more colour as

directed ) to be laid over cement mortar bedding of C M 1:3 (1 cement : 3 sand ) contain

water proofing materials per bag of cement useas specified by manufactured and slops to

be tempered to bring mortar up to surface with using white cement and colour pigment

including rounding of junctions and extending them up to 15 cm along the wall and curing

with bends any patens or design as per drawing and cleaning by using oxalic acid etc.

39 Constructing Sandwich Platform of 18 mm thick Polished Black or selected Granite at top 5.00 Sq.M 3058.28

and 25 mm thick Kota stone slab With 75CM height with necessary Support using 20mm

thick cement mortar 1:3 for sandwich and fitting at bottom & edges with waterproof rigid

adhesives including making necessary grooves in walls with Vertical support of double

Kota stone sandwich every 60 cm centre to centre including all labour material of approved

quality including full moulded round front edge fixed in wall for partition and jointed

with grey cement slurry including rubbing and polishing etc. complete

40 Providing and fixing 35mm Thick door Single shutter solid core finished having factory 3.00 Sq.M 3610.75

fabricated std. Extruded aluminium colour anodized hollow section Jindal 19552 weight not

less than 1.1 kG/MT {Section 63.50 x 38 mm x 2.50 mm thick } for door frame, hollow

portion of door frame shall be filled with wood to be insert for durable grip of door hinges,

with factory made 38 mm.thick flush door both side 1 mm thick pre laminated with 6 Lever

Mortice lock {Godrej or Equivalent), SS Aldrop 30cm long, SS Handle size 30 Cm Long, Tower

Bolt size 20 cm & Floor spring heavy duty etc. as per detail colour & pattern apporoved by

this office including necessary anodized alluminum fixtures and fastenings.

41 Providing and fixing FRP frame size 125 x 65 mm and 35mm thick FRP shutter having extra 7.00 Sq.M 2615.04

reinforcement on sides & edges in polish finish. The core of the shutter & frame is to be

filed up with injected polyurethene foam done in situ alongwith embedded wooden pieces

for stiffening & also taking hinges & fintures. The whole FRP frame & shutter is to be water

proof weather proof, termite proof & resistance to mild acid/alkali. Rates are to be inclusive

of S.S hinges with necessary screws & alluminium S.S fixtures & fastenings & fastener

42 Providing and fixing jindal E (30 mm) series Three track alluminimum window (3 shutter + 1 22.00 Sq.M 4134.94

Mosquito net shutter) standard extureded colour anodized section with frame having frame

bottom member jindal section no:20928 @ wt. of 2.032 kg/Rmt, frame side and top

member jindal section no.:20827 @ wt. of 1.197 Kg/Rmt with sliding shutters of single glass

shutter top bottom member Jindal section no.20993 @ wt.of 0.839 Kg/Rmt & side member

jindal section no. 20550 @ wt. of 0.994 Kg/Rmt & inter lock member jindal section no.

20549 @ wt. of 0.809 Kg/Rmt. with 5 mm thick transperent plain float glass in shutter

including fitting, fixtures, rubber gasket and transperent silicon seleant as per drawing and

instruction of engineer in charge etc. completed for Window Three Track

43 Providing and fixing jindal E (30 mm) series Three track alluminimum window (2 shutter + 1 4.00 Sq.M 3517.83

Mosquito net shutter) standard extureded colour anodized section with frame having frame

bottom member jindal section no:20928 @ wt. of 2.032 kg/Rmt, frame side and top

member jindal section no.:20827 @ wt. of 1.197 Kg/Rmt with sliding shutters of single glass

shutter top bottom member Jindal section no.20993 @ wt.of 0.839 Kg/Rmt & side member

jindal section no. 20550 @ wt. of 0.994 Kg/Rmt & inter lock member jindal section no.

20549 @ wt. of 0.809 Kg/Rmt. with 5 mm thick transperent plain float glass in shutter

including fitting, fixtures, rubber gasket and transperent silicon seleant as per drawing and

instruction of engineer in charge etc. completed for Window Three Track

44 Providing & Fixing in position standard extruded approved colour anodised Aluminum 2.00 Sq.M 1175.56

Ventilator with outer frame 65 x 25 mm Stander Box Frame(@ Wt 1.094 kg/Rmt ) with 5mm

thick fixed ground glass and mosqulto net fixed to alluminium strip blade fixed orlovers

adjestable ventilation including all required materials, fixtures, fastenning, labours and

equipments as per detailed drawing as directed. For Ventilators

45 Providing and fixing kitchen platform trolley having three drawers of SS (IS 304) of required 11.00 Sqmt. 12645.20

size like thali, katleri, perforated, partition, cupsosar type in kitchen platform having drawer

front side and backside by using 19mm thick all proof plywood of ISI quality all side

laminated etc. as directed. The size of SS (IS 304) basket of size 4" to 18" for thali, dish,

katleri, perforated, partition, cupsosar type as directed including necessary S.S. fittings,

handles, nobs, telescopic channels, etc. as directed

46 Providing erecting and fixing double coated Syntex PVC. (ISI) water tank of required 6000.00 Liter 3.95

capacity each with all necessary fittings and connection etc. complete on terrace.

47 Providing, laying and jointing in true line and level 110 diameter U.P.V.C SWR (Type B) Pipe 240.00 Rmt 835.15

conforming to IS 13592-1992 with one end plain and other end socketed with rubber ring, &

fittings conforming to ISI 14735-1999 of approved make for drainage system pipe line, pipe

shall be jointed with each other with rubber lubricant, pipe shall be fixed on wall using of

PVC clamp of the size 110 mm diameter x 149 mm length x 145 mm height at every

mm centre to centre or shall be concealed in walls as directed including necessary fittings

such as bends, "Y" "T" shoes etc. including testing of pipes and joints and jointed with

adhesive solvent cement including cost of all materials.

48 Providing, laying and jointing in true line and level U.P.V.C. SWR Type B Pipe conforming to 120.00 Rmt 831.22

IS 13592-1992 with one end plain and other end socketed with rubber ring, & fitting

conforming to IS 14735-1999 of approved make for drainage system pipeline, pipe shall be

jointed with each other with rubber lubricant, pipe shall be fixed on wall using PVC Clamp of

the size 160mm dia x 210 mm length x 196 mm high at every 2000 mm centre to centre or

shall be concealed in walls as directed including necessary fittings such as bends, shoes,

tees, etc. including testing of pipes and joints and jointed with adhesive solvent cement

including cost of all materials

49 Providing laying and jointing in true line and level 50mm dia. U.P.V.C. Pipe ( SCH- 40) for 40.00 Rmt 195.67

cold water including fittings make PRINCE / SUPREME / ASTRAL / FINOLEX or equivalent as

approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at

every two metre C/C or shall be concealed as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with adhesive solvent, including cost

of all materials.

50 Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe ( SCH- 40) for 80.00 Rmt. 148.12

cold water including fittings make PRINCE / SUPREME / ASTRAL / FINOLEX or equivalent as

approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at

every two metre C/C or shall be concealed as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with adhesive solvent, including cost

of all materials. 40mm dia

51 Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe ( SCH- 40) for 240.00 Rmt. 91.84

cold water including fittings make PRINCE / SUPREME / ASTRAL / FINOLEX or equivalent as

approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at

every two metre C/C or shall be concealed as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with adhesive solvent, including cost

of all materials. 25mm dia

52 Providing and fixing concealed centre point to wall ceiling & floor CPVC (SDR 13.5) Pipe 15.00 Rmt. 249.72

having National Sanitation Foundation (NSF) seal for potable water of following dia. Nominal

bore tube fitting and clamps including making good the wall, ceiling, and floor, etc.

complete 25 mm dia

53 Providing and fixing concealed centre point to wall ceiling & floor CPVC (SDR 13.5) Pipe 72.00 Rmt. 166.86

having National Sanitation Foundation (NSF) seal for potable water of following dia. Nominal

bore tube fitting and clamps including making good the wall, ceiling, and floor, etc.

complete 15 mm dia

54 Providing and fixing Gun metal check or non-return full way wheel valve.(D) 50mm dia. 12.00 No 1111.00

55 Providing and fixing Gun metal check or non-return full way wheel valve.(E) 40mm dia. 10.00 No 663.43

56 Providing and fixing Gun metal check or non-return full way wheel valve.(C) 25mm dia. 6.00 No 420.63

57 Providing and fixing ball cock of approved. quality as directed.(A) Copper Metal (ii) 50mm 2.00 No 189.84

58 Providing and fixing wash down water closet (European W.C. Pan) with integral P or S trap 3.00 No 3150.19

and PVC dual flush tank with complete fittings including cutting holes in walls and making

good the same connecting the flush bend with cistern and closet etc. complete including

plastic seat cover, water jet and including jointing trap with Waste pipe overall size as per

the selection of the Model by E.I.C. or as approved}

59 Providing & fixing of first quality (ii) Flat Back washbasin 550 mm x 400mm size. (i) In white 3.00 No 2044.24

colour. including with approved sanitary grade material with C.P waste coupling, waste pipe,

15mm dia Pillar & Stop Cock of approved brand with connection 15mm dia flexiable pvc

pipe etc. complete

60 Providing and fixing screw down bib taps of following size.(B) Brass chromium plated screws 9.00 No 186.83

down Bib Tap. (i) 15mm dia. Jaquar, plumber, ess, or equiavalent make

61 Providing and fixing granite shelves (size 150 x 300mm) as approved by Engineer In Charge. 1.00 Sqm 3651.88

62 Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm diameter with jali of 10.00 No 558.36

the following nominal diameter of self cleansing design with C.I scread down or hinged

grating including the cost of cutting and making good the walls.

63 Providing and fixing Jet spray to connect wall mount w.c with 1.5 mtr long plc. heavy duty 3.00 No 308.99

supply pipe with two side male female checknut etc. complete.

64 Providing and fixing S.W. Gully trap with C I grating brick masonry chamber and water tight 6.00 No 1246.92

C I cover with frame of 300 x 300 mm size (inside) with standard weight (i)square mouth

traps (C) 150 mm x 100 mm size P or R type

65 Providing and fixing C.P. brass towel rail complete with C.P. Brass brackets fixed to wooden 6.00 No 603.19

plugs with C.P. Brass screws, (B) 600mm x 20 mm size

66 Providing and fixing 600mm x 450mm Bevelled edge glass mirror of superior glass mounted 3.00 No 833.73

on 6mm the A.C. sheet or plywood sheet & fixed to wooden plugs with C.P. brass screws

67 Providing and fixing in position PVC cowel went to pipes.(C) 160mm dia 2.00 No 202.00

68 Providing and fixing in position PVC cowel went to pipes.(B) 110mm dia. 2.00 No 176.75

69 Providing and fixing to wall, ceiling and floor 10.0 Kg f/cm2 working pressure polyethylene 40.00 Rmt. 336.24

pipes of the following outside dia. Low density, complete with special flange compression

type fittings wall clamps etc. including making good the wall, ceiling and floor. (G)110 mm

70 Constructing brick masonry chamber for under ground C.I. Inspection chamber and bends 15.00 No 3660.76

with bricks having crushing strength not less than 35 Kg/cm2 in cm. 1:5 C.I. Cover with

frame (light duty) 455 mm. X 610 mm. Internal dimensions, Total weight of cover with

frame to be not less than 38 Kgs. weight of cover 23 Kg. and wt. of frame 15 Kg) R.C.C. top

slab with 1:2:4 mix(1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm. size )

foundation concrete 1:5:10 inside plaster 15 mm. thick with cement mortar 1:3 finished

smooth with a floating coat of neat cement on walls & abed concrete etc. complete.(ii)

Inside dimensions, 500 mm. x 700 mm. and 450 mm. Deep for pipe line with one or two

71 Applying general insecticide pest control treatment to floors, cupboards etc. including 133.00 Sq.M 40.89

labour material etc. complete. Using Imidacloprid 30.5 SC As Per IS 6313 part-III (0.075%

Concentration by mass) is recommended 10.5 ml chemical dilute with 5 litters of water

application 0.5 Litre chemical / Sq.M of surface is recommended as per I.S

72 Providing and laying (Two level or slopes) and jointing with stiff mixture or cement mortar in 40.00 Rmt 518.84

proportion 1:1, salt glazed stone ware pipes including testing of pipes and joints etc.

complete and Providing and laying Cement concrete 1:5:10 (1-Cement : 5-Fine sand :10-

Graded stone aggregate 40mm nominal size) bedding for stoneware pipes (166mm Ave.

bed thickness) of following internal diameters with necessary formwork and curing

complete.(B) 150mm dia.

73 Providing and laying (Two level or slopes) and jointing with stiff mixture or cement mortar in 80.00 Rmt 343.52

proportion 1:1, salt glazed stone ware pipes including testing of pipes and joints etc.

complete and Providing and laying Cement concrete 1:5:10 (1-Cement : 5-Fine sand :10-

Graded stone aggregate 40mm nominal size) bedding for stoneware pipes (166mm Ave.

bed thickness) of following internal diameters with necessary formwork and curing

complete.(B) 110mm dia.

74 Providing and laying (to level or slope) and jointing reinforced concrete not pressure pipes IS 30.00 Rmt 665.48

class NP 2 of the following internal diameter with collars and nut ends prepared for collar

joints including testing of joints complete 300 mm dia

75 Providing and laying in trenches jointing in true line and level 50mm dia. U.P.V.C. Pipe ( SCH- 60.00 Rmt 291.89

40) for cold water including fittings make PRINCE / SUPREME / ASTRAL / FINOLEX or

equivalent as approved by Engineer In Charge, including necessary fittings etc. including

testing of pipe and joints and fixing the same with adhesive solvent, including cost of

excavation & refilling the same with all materials.

76 Providing and fixing Safety Grills of required pattern for windows/door using 16mm x 16 698.00 Kg. 108.75

mm square M.S. polished bars, Required at required spacing as per design and hold fast

with coach bolts including one coat of primer and two coats of matt finished oil painting etc.

77 Providing and fixing Kotastone shelves as approved by Engineer In Charge. 16.00 Sqmt. 219.93

78 Providing and fixing kitchen platform trolley having three drawers of SS (IS 304) of required 0.00 Sqmt. 0.00

size like partition type in kitchen platform having drawer front side and backside by using

19mm thick all proof plywood of ISI quality all side laminated etc. as directed. The size of SS

(IS 304) basket of size 4" to 18" for tperforated, partition type as directed including

necessary S.S. fittings, handles, nobs, telescopic channels, etc. as directed

79 Providing and fixing steel cupboard having frame of 40 mm x 40 mm x 5 mm M.S. angle 16.00 Sq.Mt 3510.76

double door shutter of CRC plate of 18 gauge (1.219 mm thickness) with 30 mm x 3 mm x

3mm angle framing at top and bottom edge of shutter 10 mm x 10 mm square M.S. bars

Nos. vertical and 40 mm x 3 mm M.S. flat at one edge of each shutter and for lock along

with one coat of red oxide and two coats of spray oil painting of approved brand and colour

shed and locking arrangement including 20 mm thick both side polished granite stone fixed

in walls (5 Nos. of shelves )with making grooves and having front edge with full moulding

etc. complete as directed by Engineer-in-charge.

80 Providing and Fixing Paver block M200 Grade 60mm Thick interlocking concrete unishape 500.00 Sq.Mt 596.91

(Monolithic Single Layer Precast Concrete) of cement colored having average crushing

strength 20N/mm2 shall be layed on 30 mm thick uniformly graded Sand bed in proper

grade and joining etc. complete as per detailed specification.

81 Providing and casting in situ ordinary cement concrete M- 150 for coping, over riding 4.00 Cmt 3598.34

returns including formwork curing and finishing complete.

82 Providing & fixing M.S. grills of required pattern in gaps of openings including frame work 700.00 Kg 105.07

etc. with one coat of red lead paint & two coats of oil paint etc. complete.

83 Constructing cattle trap made from ISMC 100 border and G.I. Pipe 50mm dia HEAVY DUTY at 12.00 Sq.Mt 4920.72

12 cm spacing by welding and necessary support of I.S.M.B. 100 x 75 x 6 section fixing in

prepard chamber as per drawing by necessary arrangement etc. Comp.

84 Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 170.00 Rmt 342.39

10 mt openable length having 50 no rounds per 6 mt length, upto 3mt height of wall with

existing angle iron (50mm x50mm x5mm )requird shaped As per Directed Engeenier in

charge. placed 2.4mt or 3.00mt apart and with 4 horizontal R.B.T. reinforced barbed wire(3

mm) , stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts

or G.I.barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge,

with reinforced barbed tape (R.B.T.)/Spring core (2.5 mm thick) and weight

gm/meter at compound wall for ESR M4/ intakewell.

In Words: Seventy Four Lakh Thirty Two Thousand Three Hundred Seventeen Point Seven

I/We am/are willing to carry out the work at… % above/below percent(Should be written in figures and words) of the estimated rate mentioned above.

Amount of my /our tender works out as under.

* Estimated Amount * Estimated Amount

put to tender put to tender

Deduct :…………% Below Add :………%Above

In Words …………………………………… In Words………………………………

* (Please strike out whichever is not applicable).

1 The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which no extra

payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills

4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement Consumption/16/C

Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the cost of difference of cement

consumption have been deducted from the rate of original item at the rate of input rate mentioned in all the tender.

5 The amount of dismentalled credit materials at Rs. 0 shall be deducted from first R.A. Bill.

Dy. Executive Engineer Executive Engineer

Const.(R&B) sub Division Rajpipla (R&B) Division

Dediapada Rajpipla