Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹35.0 L
EMD Value
₹35,014
Closing Date
22 Mar 2024, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
NBCC Bhawan
NBCC Bhawan
Tender for SITC of 2 Nos Passenger lifts i.e., 01 No 13 Passenger lift of configuration B,G,2 and 01 No Passenger Lift G,3 at Security Police Line Bapudham New Delhi at risk and cost of Previous Agency
NBCC/SBGDelhi-I/NIT/DPW-Bapudham/2024/80~EWb6a6abce86072c2d5a2568d8
NBCC/SBGDelhi-I/NIT/DPW-Bapudham/2024/80
Open Tender-Domestic
Electrical Work
NBCC Bhawan
₹2,950
₹35,014
22 Mar 2024
20 Jan 2024
22 Mar 2024
20 Jan 2024
22 Mar 2024
Bill of Quantities (BoQ)
Tender for “SITC of 2 Nos. Passenger lifts i.e., 01 No. 13 Passenger lift of configuration (B+G+2) and 01 No. Passenger Lift
(G+3) at Security Police Line, Bapudham, New Delhi” at risk & cost of Previous Agency.
No. (E&M)-2014 Item Unit Qty. Rate Amount
1 NS-1 Lift No.-1 :- LOCATION - TRAINING BLOCK Nos 1.00 1813853.00 1813853.00
i) Supplying, installation, testing & commissioning of 13 Passenger Lift (884 KG) having contract
speed of 1.75 MPS serving different floors in the lift shaft as per detailed specifications enclosed
and as under :-
ii) Floors --> B+G+2
iii) Travel --> 12.5 Mtrs.
iv) Stops & opening - --> 4/900 mm WideX 2000mm High
v) Controller: A.C. variable voltage & variable frequency
vi) Automatic rescue device complete with dry maintenance free batteries as required.
vii) Operation : Microprocessor based single automatic push button/simplex selective collective with
/ without attendant.
viii) Power-415 V, 3 phase, 50 Hz, 4 wires system
ix) Type of doors
(a) Car Power operated, Center Opening Stainless steel door with Honeycomb/ Moonrock
(b) Landing doors : Stainless Steel in Honeycomb/Moon Rock Finish (Scratch Proof)
x) Hand rail not less than 600mm long at 900mm above floor level to be fixed on all the three sides
adjacent to control panel in the lift car.
xi) The Lift shall be provided with Brail System.
xii) Ceiling as per manufacturer's standards with Fan & CFL Lights.
xiii) On each Landing outside the lift, a steel plate with illumination sign shall be provided with
written on it:-
a) DO NOT USE LIFT IN CASE OF FIRE
xiv) Voice announcement system in the car to announce the position of the elevator in the hoistway
as the car passes or stops at a floor served by the elevator.
Car flooring :-PVC Flooring/Granite Flooring
2 NS-2 Lift No.-2 :- LOCATION - SPL BLOCK
1 Supplying, installation, testing & commissioning of 5 Passenger Lift (340 KG) MRL Lift having Nos 1.00 1581907.00 1581907
contract speed of 1.0 MPS serving different floors in the lift shaft as per detailed specifications
enclosed and as under :-
i) Speed --> 1.0 MPS
ii) Floors --> G+3
iii) Travel --> 10.8 Mtrs.
iv) Stops & opening - --> 4/800 mm WideX 2000mm High
v) Controller: A.C. variable voltage & variable frequency
vi) Automatic rescue device complete with dry maintenance free batteries as required.
vii) Operation : Microprocessor based single automatic push button/simplex selective collective with
/ without attendant.
viii) Power-415 V, 3 phase, 50 Hz, 4 wires system
ix) Type of doors
(a) Car Power operated, Center Opening Stainless steel door with Honeycomb/ Moonrock
(b) Landing doors : Stainless Steel in Honeycomb/Moon Rock Finish (Scratch Proof)
x) Hand rail not less than 600mm long at 900mm above floor level to be fixed on all the three sides
adjacent to control panel in the lift car.
xi) The Lift shall be provided with Brail System.
xii) Ceiling as per manufacturer's standards with Fan & CFL Lights.
xiii) On each Landing outside the lift, a steel plate with illumination sign shall be provided with
written on it:-
a) DO NOT USE LIFT IN CASE OF FIRE
xiv) Voice announcement system in the car to announce the position of the elevator in the hoistway
as the car passes or stops at a floor served by the elevator.
Car flooring :-PVC Flooring/Granite Flooring
3 1.3.2 Wiring for light point / fan point / exhaust fan point /call bell point with 1.5 mm. sq FRLS PVC
insulated copper conductor single core cable in surface / recessed steel conduit, with modular
switch, modular plate, suitable GI Box and earthing the point with 1.5 mm. sq FRLS PVC
insulated Copper conductor single core cable etc as required.
Digitally signed by AVDHESH
4 2.8.6 Supplying and fixing following way, three pole and neutral, sheet steel prewired MCB
distribution board, 415 volts, on surface /recess, complete with inbuilt loose wire box , terminal
blocks, duly prewired with suitable size FRLS PVC insulated copper conductor up to terminal
blocks, tinned copper busbar, neutral link, earth bar, din bar, detachable gland plate,
interconnections, phosphatized and powder painted including earthing etc. as required (but
without MCB/RCCB/ Isolator)
6 Way (4+18), Double door Each 1.00 7334.71 7334.71
5 2.13.2 Supplying and fixing 63 A four Pole, 415 Volts Isolator in the existing MCB DB complete with
connections, testing & commissioning etc. as required. Each 2.00 517.51 1035.02
6 2.14.2 Supplying and fixing RCCB double pole (single phase & neutral), 240 volts Residual Current
Circuit Breaker (RCCB) having a sensitivity current of 300 mili Amp in the existing MCB DB
complete with connections, testing & commissioning etc. as required.
7 NS SITC of 1 x 10 w bulk head fitting equivalent to crompton model no. LBH- 10- CDL complete etc
8 NS Supplying of following sizes of XLPE Insulated PVC Sheathed Armoured Electric Cables with
Aluminium Conductor for Working Voltage 1.1 KV conforming to IS:7098 (Part-1)/ IS:1554 (Part- Mtrs. 225.00 104.27 23461.65
1) complete etc as required. 4X16Sq.mm
9 4.1.1 Supplying and installing following size of perforated pre-painted M.S. cable trays with
perforation not more than 17.5%, in convenient sections, joined with connectors, suspended
from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as
150 mm width X 50 mm depth X 1.6 mm thickness Mtr. 30.00 401.65 12049.44
10 9.1.33 Supplying and making end termination with brass compression gland and aluminium lugs for
following size of PVC insulated and PVC sheathed/XLPE aluminium conductor cable of 1.1. KV
grade as required.
Laying and fixing of one number PVC insulated and PVC sheathed/XLPE aluminium conductor
11 7.7.1 cable of 1.1KV grade of size upto 35 Sqmm. (clamped with 1mm thick saddle) on surface/ Cable Mtrs 225.00 18.54 4170.96
Trays as required.
Total Amount 3501354.00
Total Amount 3501354.00
Digitally signed by AVDHESH
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.06 MB
NIT_80.pdf
Tender Document
SCC_80.pdf
Tender Document
forms and format.pdf
Tender Document
GCC April 2016 with Amendments.pdf
Tender Document
Technical Specifications_80.pdf
Tender Document
80_List of Make_R1.pdf
Tender Document
BoQ Lift_80.pdf
Tender Document
addendum-2858dff7765a-80_Corrigendum_8.pdf
pdf • 0.18 MB
corrigendum-2339-Corrigendum 07.pdf
pdf • 0.13 MB
corrigendum-2330-Corrigendum 06.pdf
pdf • 0.13 MB
corrigendum-2298-Corrigendum 05.pdf
pdf • 0.13 MB
corrigendum-2275-Corrigendum 04.pdf
pdf • 0.13 MB
corrigendum-2263-corrigendum03_80.pdf
pdf • 0.25 MB
corrigendum-2244-Corrigendum02_80.pdf
pdf • 0.07 MB
addendum-ebe2c6b278fe-Corrigendum 01_80.pdf
pdf • 0.11 MB
corrigendum-2233-Corrigendum 01_80.pdf
pdf • 0.11 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .