Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹12.6 Cr
EMD Value
₹12.6 L
Closing Date
30 Nov 2026, 5:00 pm7d left
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Executive Engineer Capital Project Division No.3 Gandhinagar
Development of Gh-7 to Pethapur Road (Ch 4/000 km to 5/200 km). Dist. Gandhinagar.
363803
Tender Notice No. 25 Of 2026-27 (Sr.No.1)
Open
Civil - All
Works
Gandhinagar
7 documents required · 7 mandatory
₹18,000
Executive Engineer, Capital Project Division No.3, Gandhinagar
₹12.6 L
30 Nov 2026
6 Nov 2026
30 Nov 2026
6 Nov 2026
26 Nov 2026
6 Nov 2026
90 days
(with brief specification and reference to book of Quantity Unit Rates In Figure Amount
No. specifications)
[1] Clearing and grubbing road land including uprooting rank 3.40 Hecter 28455.09
vegetation, grass, bushes, shrubs, saplings and trees girth up
to 300 mm, removal of stumps of trees cut earlier and
disposal of unserviceable material. (C) By mechenical means
in area of light jungle.
[2] Earthwork for embankment including breaking clods, 12300.00 Cum 177.91
dressing with all lead and lift and including watering rolling
and consolidation of subgrade in layers at O.M.C. to required
dry density including filling the depression which occur
during the process using power roller 8T to 10T. (Including
all lead and lift) (Soil having CBR >=8%)
[3] Box cutting the road surface to proper slope and camber for 7700.00 Cum 109.24
making a base for road work including removing the
excavated stuff and depositing on the road side slope as
directed upto 50Mt.lead.
[4] Construction of granular Sub base by providing natural 2100.00 Cum 857.49
coarse graded material using unscreened gravel incl.
spreading in uniform layers with motor grader on prepared
surface mixing by mix in place method with rotavator at OMC
and compacting with vibratory roller to achieve the desired
density complete as per Clause 401.2 Table 400.1 grade-VI
[5] Providing and laying spreading and compacting graded stone 526.00 Cum 1676.20
aggregate to wet mix macadam 250 mm thick as per
MORT&H specification including pre mixing the material
with water at OMC in mechanical mix plant, carriage of
mixed material by tippers to site, laying in uniform layers
with paver in sub base/ base course on well prepared
surface and compacting with vibratory roller to achieve the
desire density.
[6] Providing & laying priming coat with emulsion SS-1 grade 4208.00 Sqm 97.16
and spraying emulsion with spray set fitted on mechanical
bouzer using emulsion at the rate of 7.5 Kg./10 Sqm. On
WMM surface incl. cleaning the surface etc. complete.
[7] Construction of 100 mm dry lean cement concrete Sub- base 1400.00 Cum 2465.62
over a prepared sub-grade with coarse and fine aggregate
conforming to IS: 383, the size of coarse aggregate not
exceeding 25 mm, aggregate cement ratio not to exceed 15:1,
aggregate gradation after blending to be as per table 600-1,
cement content not to be less than 150 kg/ cum, optimum
moisture content to be determined during trial length
construction, concrete strength not to be less than 10 Mpa at
7 days, mixed in a mini batching plant without silo or self
loading concrete mixer at site, as per requirement,
transported to site, laid with a paver with electronic sensor,
compacting with Fixed Form Paver and 8-10 tonnes
vibratory roller, finishing and curing.
Description of Item
(with brief specification and reference to book of Quantity Unit Rates In Figure Amount
No. specifications)
[8] Cement Concrete Pavement: Construction of 250 mm un- 3500.00 Cum 6037.86
reinforced, dowel jointed, controlled cement concrete
pavement (M-30) over a prepared sub base with 53 grade
cement @ 410 kg per cum, coarse and fine aggregate
conforming to IS 383, maximum size of coarse aggregate not
exceeding 25 mm, mixed in a mini batching plant without silo
or self loading concrete mixer at site, as per approved mix
design, transported to site, laid with a Slip Form Paver,
spread, compacted and finished in a continuous operation
including proper formwork, provision of contraction,
expansion, construction and longitudinal joints, joint filler,
separation membrane, sealant primer, joint sealant,
debonding strip, dowel bar of 32mm diameter with 450 mm
length and 300mm spacing , tie bar of 12mm diameter with
580mm length and 450mm spacing, with necessary
admixtures and hardners as per approved mix design, curing
finishing with all necessary tools to lines grades and camber
as per drawing. (RA-8)
[9] Scarifying gravelled macadam or bitumen macadam surface 23000.00 Sqm 42.76
6 cm to 10 cm.depth including stacking useful materials on
road side and disposing off remaining stuff.
[10] Providing and laying 50 mm D.B.M. with B.T. Aggregate as 2778.00 MT 5036.71
per MORT&H specification with VG-40 for tack coat @
Kg./10 smt. With Mechanical Sprayer & Bitumen VG-40
Grade for mixing @ 45.00 Kg./MT. ie. 4.5 % by total weight of
mix heating and mixing the aggregate & asphalt in
continuous batch mix plant and transporting to site and
spreading the same by sensor paver finisher & consolidation
with vibratory roller including providing all materials
equipments, tools & plant, fire wood, oil, kerosene, labour
charges etc. complete using contractor's own machinery
batch mix plant & sensor paver finisher etc. complete.
[11] Providing and laying Bituminous concrete 40 mm on 2264.00 MT 5607.31
existing bituminous surface and using specification graded
machine crushed with 5.50 % bitumen VG-40 grade by Wt.
of total mix as per specification MORTH including mixing of
asphalt with B.T. chips in continuous batch mix plant
transporting same as by paver finisher and consolidation the
same with pair of 8 tonnes to 10 tonnes vibratory roller to
achieve desire density and including VG-40 grade bitumen,
cost of emulsion, cost of required tools , plants, all
machineries, equipment fire wood , oil, kerosene, charges
etc.complete.
[12] Road marking with hot applied thermoplastic paints with 1616.00 Sqm 367.72
reflectorising glass beads on bitumin surface providing and
laying a hot applied thermoplastic compound 2.5 mm thick
including reflectorising glass beads @ 250gms per sqm area,
thickness of 2.5mm is excluding of surface applied glass beds
as per IRC:35-2015. The finished surface to be level, uniform
and free from streaks and holes. zebra patta /bump patta
lane/center line/ edge line/cut patta. The white color
marking should provide liminance coefficinet on cemend
road shalll be min 130 mcd/m2/lux and Asphalt road shall
be min 100 mcd/m2/lux during the service life during the
day time. The marking should meet the performance criteria
for night time reflectivity, wet reflectivity and skid resistance
as mentioned in the section-15 of IRC 35-2015. Warranty for
the Retro reflectivity should be two years.
Description of Item
(with brief specification and reference to book of Quantity Unit Rates In Figure Amount
No. specifications)
[13] Cat Eye / Road Stud / RPM: Supplying of Molded Twin 461.00 No 326.23
Shanks Raised Pavement Markers made of polycarbonate
and ABS moulded body and reflective panels with micro
prismatic lens capable of providing total internal reflection of
the light entering the lens face and shall support a load of
13635 kgs. tested in accordance to ASTM D 4280 Type H and
complying to Specifications of Category A of MORTH Circular
No RW/NH/33023/10-97 DO III Dt 11.06. 1997. The height,
width and length shall not exceed 20 mm, 130 mm and
mm and with minimum reflective area of 13 Sqcm on each
side and the slope to the base shall be 35 +/- 5 degree. The
strength of detachment of the integrated cylindrical shanks,
(of diameter not less than 19 +/- 2 mm and height not less
than 30+/- 2 mm) from the body is to be a minimum value of
500 Kgf. Fixing will be by drilling holes on the road for the
shanks to go inside, without nails and using epoxy resin
based adhesive as per manufacturers recommendation and
The color of the marker should be as per the IRC 35-2015
and as directed by Engineer-in-charge.
[14] Cautionary Warning Sign :-Providing and fixing sign boards 6.00 No 5077.27
made out of 2mm aluminium sheet / 4mm ACP (Aluminum
composite Panel); size 90 x 90 x 90 cms. equilateral triangle
as per design of IRC-67-2012. Pre treated with phospheting
process & acid etching; coated with one coat of epoxy primer
and two coats of best quality epoxy paint ;reflectorised with
Micro Prismatic Grade retro refiective sheeting of Type-11 as
per ASTM D-4956 and latest M.O.S.T.Specifications; 3.6mtr
long stand post of 75 x 75 x 6mm / 65NB Circular MS Pipe as
required and frame fabricated from suitable size iron angle
of 35 x 35 x 3mm; painted with bestquality epoxy coatings in
black and white bends. The details of symbol for each board
shall be as per the instruction of engineer in charge. The
fixing at site shall be in 1:2:4 CC block of size 45 x 45 x
Cms. for each leg.including excavation, curing etc.complete
under the supervision of engineer in charge. A warranty for
10 years for the Retro reflective sheeting from original
manufacturer & a certified copy of 3 year outdoor exposure
test report from third party test lab for the product offered
shall be submitted by contractor. (A) Class-C Type-11 Retro
Reflective sheeting
[15] Regulatory / Mandatory Sign :-Providing and fixing sign 18.00 No 4618.73
boards made out of 2mm aluminium sheet / 4mm ACP
(Aluminum composite Panel); size 60 cms Dia Circle as per
design of IRC-67-2012. Pre reated with phospheting process
& acid etching; coated with one coat of epoxy primer and two
coats of best quality epoxy paint ;reflectorised with Micro
Prismatic Grade retro refiectivesheeting of Type-11 as per
ASTM D-4956 and latest M.O.S.T.Specifications; 3.6mtr long
stand post of 75 x 75 x 6mm / 65NB Circular MS Pipe as
required and frame fabricated from suitable size iron angle
of 35 x 35 x 3mm; painted with bestquality epoxy coatings in
black and white bends. The details of symbol foreach board
shall be as per theinstruction of engineer in charge. The
fixing at site shall be in 1:2:4 CC blockof size 45 x 45 x
Cms. for each leg.including excavation, curing etc.complete
under the supervision of engineer in charge. A warranty for
10 years for the Retro reflective sheeting from original
manufacturer & a certified copy of 3 year outdoor exposure
test report from third party test lab for the product offered
shall be submitted by contractor. (A) Class-C Type-11 Retro
Reflective sheeting
Description of Item
(with brief specification and reference to book of Quantity Unit Rates In Figure Amount
No. specifications)
[16] STOP Sign :-Providing and fixing sign boards made out of 2.00 No 7213.42
2mm aluminium sheet / 4mm ACP (Aluminum composite
Panel); size 90 cms Octagone as per design of IRC-67-
Pre treated with phospheting process & acid etching; coated
with one coat of epoxy primer and two coats of best quality
epoxy paint ;reflectorised with Micro Prismatic Grade retro
refiectivesheeting of Type- 11 as per ASTM D-4956 and latest
M.O.S.T.Specifications; 3.6mtr long stand post of 75 x 75 x
6mm / 65NB Circular MS Pipe as required and frame
fabricated from suitable size iron angle of 35 x 35 x 3mm;
painted with bestquality epoxy coatings in black and white
bends. The details of symbol foreach board shall be as per
theinstruction of engineer in charge. The fixing at site shall
be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for each
leg.including excavation, curing etc.complete under the
supervision of engineer in charge. A warranty for 10 years
for the Retro reflective sheeting from original manufacturer
& a certified copy of 3 year outdoor exposure test report
from third party test lab for the product offered shall be
submitted by contractor. (A) Class-C Type-11 Retro
Reflective sheeting
[17] Place Identification Sign :-Providing and fixing sign boards 2.00 No 14085.46
made out of 2mm aluminium sheet / 4mm ACP (Aluminum
composite Panel); size 150x90 cms. rectangular as per design
of IRC-67-2012. Pre treated with phospheting process & acid
etching; coated with one coat of epoxy primer and two coats
of best quality epoxy paint ;reflectorised with Micro
Prismatic Grade retro refiectivesheeting of Type-11 as per
ASTM D-4956 and latest M.O.S.T.Specifications; 4.0mtr long
(2 Nos.) stand post of 75 x 75 x 6mm / 65NB Circular MS
Pipe as required and frame fabricated from suitable size iron
angle of 35 x 35 x 3mm; painted with bestquality epoxy
coatings in black and white bends. The details of symbol
foreach board shall be as per theinstruction of engineer in
charge. The fixing at site shall be in 1:2:4 CC blockof size 45 x
45 x 60 Cms. for each leg.including excavation, curing
etc.complete under the supervision of engineer in charge. A
warranty for 10 years for the Retro reflective sheeting from
original manufacturer & a certified copy of 3 year outdoor
exposure test report from third party test lab for the product
offered shall be submitted by contractor. (A) Class-C Type-11
Retro Reflective sheeting
[18] Chevron sign :-Providing and fixing sign boards made out of 20.00 No 4681.35
1.5mm aluminium sheet / 3mm ACP (Aluminum composite
Panel); size 60x50 cm as per design of IRC-67- 2012. Pre
treated with phospheting process & acid etching; coated with
one coat of epoxy primer and two coats of best quality epoxy
paint ;reflectorised with Micro Prismatic Grade retro
refiectivesheeting of Type- 11 as per ASTM D-4956 and latest
M.O.S.T.Specifications; 3.3 mtr long stand post of 75 x 75 x
6mm / 65NB Circular MS Pipe as required and frame
fabricated from suitable size iron angle of 50 x 50 x5mm;
painted with bestquality epoxy coatings in black and white
bends. the details of symbol or inscription / numerals for
each board shall be as per the instruction of engineer in
charge.The fixing at site shall be in 1:2:4 CC blockof size 45 x
45 x 60 Cms. for each leg.including excavation, curing
etc.complete under the supervision of engineer in charge. A
warranty for 10 years for the Retro reflective sheeting from
originaa manufacturer & a certified copy of 3 year outdoor
exposure test report from third party est lab for the product
offered shall be submitted by contractor. (A) Class-C Type-11
Retro Reflective sheeting
Description of Item
(with brief specification and reference to book of Quantity Unit Rates In Figure Amount
No. specifications)
[19] Hazard Marker Sign :-Providing and fixing sign boards made 4.00 No 3666.30
out of 2.0 mm aluminium sheet / 4 mm ACP (Aluminum
composite Panel); size 90x30 cms. rectangular as per design
of IRC-67-2012. Pre treated with phospheting process & acid
etching; coated with one coat of epoxy primer and two coats
of best quality epoxy paint ;reflectorised with Micro
Prismatic Grade retro refiectivesheeting of Type-11 as per
ASTM D-4956 and latest M.O.S.T.Specifications; 1.8mtr long
stand post of 75 x 75 x 6mm / 65NB Circular MS Pipe as
required and frame fabricated from suitable size iron angle
of 35 x 35 x 3mm; painted with bestquality epoxy coatings in
black and white bends. The details of symbol foreach board
shall be as per theinstruction of engineer in charge. The
fixing at site shall be in 1:2:4 CC blockof size 45 x 45 x
Cms. for each leg.including excavation, curing etc.complete
under the supervision of engineer in charge. A warranty for
10 years for the Retro reflective sheeting from original
manufacturer & a certified copy of 3 year outdoor exposure
test report from third party test lab for the product offered
shall be submitted by contractor. (A) Class-C Type-11 Retro
Reflective sheeting
[20] Median Marker : Providing and Fixing of Median Marker that 400.00 Nos. 271.69
are made of tough, high impact resistant, injection-molded,
thermoplastic body with property of flexibility to provide
high durability. The dimension of Flexible Median Marker
should not exceed 18.4 cm in height(including shank
eight),12.5 Cm in width. ,0.65 cm in thickness and shank
depth shall be 3.4 cm The body structure shall be rounded at
all its corners and edges. The ABS plastic used for molding
the Median Marker should survive impact load of 5kg
continuously for 750 times at room temperature. The logo of
the manufacturer shall be embossed on either side of the
body in the injection molding process. The Median Marker
shall have flame like shaped body with, fluorescent yellow
color retro-reflective sheeting of size not less than 90 Cm
square, with fully reflective micro prismatic cube corners as
its retro-reflective elements as per IRC 67 2012 and ASTM
D4956-09 type XI specifications reflectivity values. The retro-
reflective sheeting shall be one or both sides of the Median
Marker and shall be edge protected with no exposed edges
which will prevent edge lifting, vandalism, sheeting damage,
etc. The Median Marker shall be fixed by a combination of
epoxy adhesive and grouting as recommended by
manufacturer and Engineer in charge.
[21] Providing & fixing Median Safety Grill with horizontal 50 x 25 4000.00 Rmt 4552.07
x 4 mm pipe with 25 x 25 x 2.6 mm vertical MS Pipe of 1 m
height with 25 x 25 x 2.6 mm vertical MS Pipe length of
m welded and embedded in foundation base of M150 grade
controlled concrete as gudied by in charge as per drawing/
design including cost of erection and painting.
[22] Traffic Bollard “L” type jumbo: Providing and Fixing Traffic 4.00 No 4454.10
Bollard L type jumbo made out of 18 gauge MS sheet in
conical shape having bottom diameter 30 cms and top
diameter 22 cms; height 155 cms, coated with white epoxy
powder coating and three red retro elective bend of 15cms
width applied on the body and circular reflection ton on front
using high intensity grade confirming to ASTN D4955 -
Type-IV material, at fixed site in M15 PCC as per the
instruction of Engineer in charge.
Description of Item
(with brief specification and reference to book of Quantity Unit Rates In Figure Amount
No. specifications)
[23] Kerb guard sign board (small) :-Providing & Fixing sign 4.00 No 7480.06
boards made out of 2mm aluminium sheet, size 240 x 30 cms
in U spape; as per the attached drawing pre treated with
phospheting process & acid etching. coated with one coat of
epoxy priemr and two coats of best quality epoxy paint
reflectorised with Micro Prismatic Grade retro
refiectivesheeting of Type-11 as per ASTM D-4956 and latest
M.O.S.T.Specifications; stand post and frame fabricated from
iron angle of 50x50x5mm, 10mm sq. bar as required, painted
with best quality epoxy coating the fixing at site shall be in
1:2:4 CC block of size 45 x 45x 60cms for each leg, including
excavation curing etc. complete under the supervision of
engineer in charge. A warranty for 10 years for the Retro
reflective sheeting from original manufacturer & a certified
copy of 3 year outdoor exposure test report from third party
test lab for the product offered shall be submitted by
contractor. (A) Class-C Type-11 Retro Reflective sheeting.
[24] Providing and fixing pre-cast Rubber Dye / steel Dye inter 2400.00 Sqm 706.90
locking concrete block 60mm thick with grade of concrete
M300 pnumatic compressed / vibrated mechanically and as
per approved design Confirming to IS 15658 : 2006 including
35 mm Sand layer for levelling and filling the joint with sand
in proper line and level as per guidelines of IRC : SP 63-2018
etc. Complete.
[25] Providing and fixing pre-cast concrete kerb stone of gray 6000.00 Rmt 374.92
cement based concrete block 30cm length,30cm height and
15cm thick of M200 grade concret as per approved design
and including excavation for fixing in proper line and
level,filling the joint with C:M 1:3 (1cement:3fine sand) etc
[26] Providing Yellow and Black Patta including Finishing wall 3600.00 Sqm 96.56
with weather proof exterior emulsion paint on wall surface
(two coats) to give an required shape even shade after
thoroughly brushing the surface to remove all dirt, and
remains of loose powdered materials. etc complete as per
instruction of Engineer Inchare
[27] Dismantling kerb stone by manual means and disposal of 400.00 Rmt 13.13
dismantled material with all lifts and lead.
[28] Dismantling of existing structures like culverts, bridges, 30.00 Cum 630.24
retaining walls and other structure comprising of masonry,
cement concrete, wood work, steel work, including T&P and
scaffolding wherever necessary, sorting the dismantled
material, disposal of unserviceable material and stacking the
serviceable material with all lifts and lead
[29] Providing & Fixing solar power road trafic flasher (24 hours 4.00 No 7878.00
operation) having 30c mm round light source , cluster of high
intencity ultra bright lead visibility greater than 500 mtrs
red or amber availabel or required. Falshing duty cycle 50%
operation for 24 hr. located 3.0 mt. above the ground level.
design in line with IS 7537 -1974 specification of road trafic.
siganal solars model 12V 20WP / 124 ,40W , battary 12 V
60Ah /12 V 110Ah operating temperature 0 to 50 C
humidity 93% EH (NC) complete with installation.
[30] Excavation for foundation in sand, gravel, clay soft soils and 17368.00 Cum 526.15
murrum etc. including shoring, strutting dewatering as
necessary and disposing of the excavated stuff as
directed.(A) Depth upto 3.0 M. and lead upto 100m for
Description of Item
(with brief specification and reference to book of Quantity Unit Rates In Figure Amount
No. specifications)
[31] Providing and casting in situ Ordinary cement concrete M- 2107.00 Cum 3743.3 ,
150 for R.C.C. Raft and cut-off walls including necessary 1..."' /
shuttering laying, vibrating, ramming and curing complete. 1... /; /
[32] Supplying and fixing reinforced concrete heavy duty non- 4520.00 Rmt 3904.48
pressure pipes with collars for culverts including setting and
joining the pipes in C.M. 1:2 watering and laying (To level of
slops of I.S. 458 / 1971 Class NP4 casted by vertically / ,,./
vibrated technology of following internal diameter. 900mm
[33] Supplying and fixing reinforced concrete heavy duty non 2000.00 Rmt 2'1'08.86
pressure pipes with collars for culverts including setting and
joining the pipes in C.M. 1:2 watering and laying (To level of /
slops of I.S. 458 I 1971 Class NP3 casted by vertically .,,,.,,,,..✓
vibrated technology of following internal diameter. (iv)
[34] Constructing R.C.C chamber for underground Inspection
chamber and R.C.C. cover R.C.C.top slab with 1: 2 : 4 mix (1
Cement :2 coarese sand : 4 grade stone aggregate 20 mm / /
size) foundation concrete 1 : 3 : 6 inside plaster 15 mm thick ./"'
with cement mortar 1: 3 finished smooth with a floating coat
of neat cement on walls and bed concerete etc. complete. (iii)
Inside dimesnsions 1700 mm X1700mm and for 900mm Dia.
l n int:1 , ......
I/We am/are willing to carry out the work at... ...................% above/below percent(Shou' d be written in fig(ltes and words) of the
Estimated Amount put to tender Estimated Amount put to tender
Deduct ................................ % Below Add ................................ %Above
In Words In Words
1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which no extra payment shall
2. The labour cess will be deducted as per prevailing rules i.e. 1 % of the work done.
3. GST and Income tax TDS will be deducted at a source while making payments of bills
4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt G.R.: PRC-10/2017 Cement Consump'tion/16/C
Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the cost of difference of cement consumption
have been deducted from the rate of original item at the rate of input rate mentioned in all the tender.
Dated Signature Engineer
the Contractor. Division No.3
Gandhinagar Gandhinagar
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
01. SBD GH-7 To Pethapur_compressed.pdf
01.1 DWG.pdf
02.1 GR PART I.pdf
02.2 GR PART II.pdf
02.3 GR PART III.pdf
02.4 GR PART IV.pdf
03. SCH B.pdf
04. Sp Index.pdf
05. Specification GH-7 To Pethapur.pdf
06. TEST SCH.pdf
PQ of GH-7 to Pethapur compresed.pdf
CORRIGENDUM
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .