THRISSUR CORPORATION KOORKANCHEREY ZONAL DIVISION 41 INSTALLATION OF OPEN GYM IN DIV-41 PROJECT NO358/25

Amount

PULL DOWN Providing and fixing using minimum 100 NB GI pipe for main frame Galvanized steel, fasteners stainless steel . 304 grade with poly caped post top cap GI post of wall thickness 3 mm handle frame size 32mm/1.25” OD Gi post of wall thickness 3mm Powder coat: Done by pure polyster powder with 70-80 micron thickness powder.

CHEST PRESS + SHOLDER PRESS Providing and fixing minimum 100 NB GI pipe for main frame, 32 NB GI pipe handle frame, 25 NB GI pipe clamps, nylon 66 injection molded casing, foot rest: Lid Roto molded seat within built bolts 3/8”x1.5” pipe cap: Nylon 66 injection molded bearing housing and pin -seamless pipe and round, Bearing: permanent sealed of reputed make Powder coat: Done by pure polyester powder with 70-80-micron thickness powder

MONKEY BAR Providingandfixingusingminimum 100 NB GI pipe forMainFrame, 32 NbGi pipe handle frame, 25 Nb Gi pipe clamps, nylon 66 injection molded casing, Cap: Nylon 66 injection molded. Bearing Housing and pin-seamless pipe andround, Bearings: permanent sealed of reputed make ,Powdercoat:Donebypurepolyster powderwith70-80micronthickness powder .

HORSE RIDER Providing and fixing using minimum 100 NB GI pipe for main frame minimum 40NB & 25 NB GI pope for foot rest pipe, minimum 40 NB & 25 NB GI pipe for handle, minimum 25 NB & 40NB GI pipe for connecting pipe, LLDP roto molded seat within built bolts 3/8”x 1.5” for footrest, nylon 66 injection molded bearing cap & pipe cap, fully done by first coat of primer jotun brad 40-50 micron thickness and top coat of pure polyester powder with 70-80 micron thickness powder

DIP STAND Providing and fixing using minimum 100 NB GI pipe for main frame Galvanized steel, fastners stainless steel, 304 grade with poly caped post top cap GI post of wall thickness 3mm handle frame size 32mm/1.25” OD GI post of wall thickness 3mm Powder coat: Done by pure polyester powder with 70-80 micron thickness powder

LEGPRESS MainpipeDia-127mm., Thickness-3mm BaseplateDia-200mm., Thickness-10mm. Powdercoat:Donebypurepolyester powder with 70-80 micron thickness powder SIZE:- 2185*X460*X1700*mm

HAND ROTATOR Providing and fixing using minimum 100NBGIpipeforMainFrame Best Quality bearing Powdercoat:Donebypurepolyester powder with 70-80 micron thickness powder

AIR WALKER Providing and fixing using 100 NB GI pipe for Main Frame minimum 32NB GI pipe for leg frame, minimum 25 NB GI pipe for handle frame, nylon 66 injection molded casing clamps, LLDP roto molded seat with inbuilt cap and pipe cap fully done by first coat of primer- jotun brad 40-50 micron thickness and top coat of pure polyester powder with 70-80 micron thickness powder

TRIPPLE TWISTER Pipe-structuremadeofG.I.PipeOF 114 mm OD. ConnectingPipe–MadeofG.I.Pipe OF 42 OD. HandleFrame-MadeofG.I.Pipe OF 32 OD. Bearing – Thrust ball bearing BearingCaps-MadeupofHDPE Material 62 mm TwisterPlates–MadeofLLDPE Pole Caps – Made up of HDPE Material. PowderCoated(Thickness90 micron)

ROWER GALVANIZEDIRON:-Fabricated with main post of 114mm dia and rest of the pipes are of 50mm dia . Either GI pipes. WELDING:-All joints of pipe are MIG welded with joints scalloped as necessary and dressed off removing sharp edgesandburrs.Zincprimer paint to be applied at all welding points prior to finishing. POWDERCOATING:-Powder coated using Akzo Nobel or equivalent of70 - 80 micron thick.

DOUBLE ELLIPTICAL Providing and fixing using minimum 100 NB GI pipe for Main Frame minimum 40 NB & 25 NB GI pipe for FOOTRestPipe,minimum40NB&25 NB GI pipe for handle, minimum 25 NB & 40 NB GI pipe for connecting pipe, LLDP roto molded seat within built bolts 3/8” X 1.5” for FOOTREST, nylon 66 injection molded bearing cap & pipe cap , fully done by first coat of primer jotun brad 40-50 micron thickness and top coat ofpure polyester powder with 70-80 micron thickness powder

DOUBLE PENDULAM Providing and fixing using minimum 100 NB GI pipe for handle frame minimum 25 NB & 20 NB GI pipe for seating frame stand, molded seat within built bolt 3/8” x1.5” for footrest nylon 66 injection molded bearing cap & pipe cap , fully done by first coat of primer jotun brad 40-50 micron thickness and top coat of pure polyester powder with 70-80 micron thickness powder coat

BOX LETTER LED BOARD ACRYLIC LED BOARD with GI pipe frame 3 Ft x 10 Ft (approx)

RAMACHANDRAN M