Major Renovation of Purchase section.(Electrical Works)

Amount

wiring for light point/fan point/exhaust fan point/ call bell point with 1.5sqmm FRLS PVC insulated copper conductor single/ multi core cable in surface/ recessed steel conduit with modular switch, modular plate, suitable GI box and earthing the point with 1.5sq.mm FRLS PVC insulated copper conductor single core cable etc as required.

Group-C

Wiring for circuit/submain wiring along with earth wire the following sizes of FR PVC insulated copper conductor single/ multi core cable in surface/ recessed steel conduit as required

2x2.5 sq mm + 1x2.5 sq mm earth wire

2x4 sq mm +1x4 sq mm earth wire

2 x 6 sq mm + 1 x 6 sq mm

4 X 2.5 sq mm + 2 x 2.5 sq mm

4 X 4 sq mm + 2 x 4 sq mm

4 X 6 sq mm + 2 x 6 sq mm

Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recessed including cutting the wall and making good the same in case of recessed conduit as required.

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc as required.

15/ 16 amps switch

3 pin 5/6 amps socket oulet

6 pin 15/ 16 amps socket oulet

Telephone socket outlet

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required

Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switch in recess etc as required

1 or 2 module (75 mm x 75 mm)

8 module (125 mm x 125 mm)

12 module (200 mm x 150 mm)

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 modular socket outlet modular switch, connection etc. As required

Installation,testing and commissioning of pre-wired fluorescent fitting/compact fluorescent fitting of all types,compelete with all accessories and tube etc.directly on ceiling/wall,including connection with 1.5 sq mm FR PVC insulated copper conductor,single core cable and earthing etc. as required.

Installation, testing and commissioning of ceiling fan, including wiring the down rod of standrand lenght ( up to 30cm) with 1.5 sq.mm FR PVC insulated, copper conductor, single core cable etc. As required

Supplying and drawing of UTP 4 pair CAT 6 LAN cable in the existing surface/ recessed steel/ PVC conduit as required.

1 run of cable

Supplying and fixing following way, single pole and neutral, sheet steel, mcb distribution board, 240v, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnection, powder painted including earthing etc. as required (but without mcb, rccb/isolator)

12 way, double door

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator

4 way (4 + 12), Double door

Supplying and fixing 5 amps to 32 amps rating, 240v/ 415v, "C" curve, miniture circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connection, testing and commissioning etc. As required

Single pole (Modular type where required)

Double pole

Triple pole and neutral

Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32 A 240 V "C" curve DP MCB complete with connections, testing and commissioning etc. as required.

Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC supply, earthing et. complete s required.

Supplying and fixing snap on trunking(DLP trunking system for aluminium adaptable) of 50 mm x 105 mm size on surface or recessed with suitable size of body with rigid 85 mm sheet cover including base and body joint , cover joint and clips for fixing the wiring and with all finishing accessories which can take any arteor wiring accessory etc as required

Supplying and fixing 6 modules Flush Box and cover for 85 mm cover (Proper fitted in aluminium adaptable DLP trunking system) with suitable size finishing plate cover clip on supports which can be fitted side by side supplied with finishing plate in the front including provision of fixing 15 Amp. & 5 Amp. Switch/ Sockets etc. as required.

Supplying and fixing 2 modules Flush Box and cover for 85 mm cover (Proper fitted in aluminium adaptable DLP trunking system) with suitable size finishing plate cover clip on supports which can be fitted side by side supplied with finishing plate in the front including provision of fixing Telephone & internet outlet Switch/ Sockets etc. as required.

Supplying and fixing left or right aluminium End caps for routing sections and supports to DLP aluminium adaptable trunking and fittings etc. as required.

Supplying and fixing Flat Angle for 85 mm cover for routing sections and supports to DLP aluminium adaptable trunking and fittings etc. as required.

Supplying and fixing Internal Angle for 85 mm cover which varies from 80 degree to 100 degree for routing sections and supports to DLP aluminium adaptable trunking and fittings etc. as required.

Supplying and fixing External Angle for 85 mm cover which varies from 80 degree to 100 degree for routing sections and supports to DLP aluminium adaptable trunking and fittings etc. as required.

supply and commissioning of indoor recess/ surface 600X600mm (2'X2') LED luminaire 42w panel light with Ultra modern designed LED luminaire which provides soft-light and glare free symmetrical illumination suitable for ceiling high luman package etc as required.

Supplying and fixing RJ45 outlet information module in exsiting modular box etc as required.

A TO Z ENTERPRISES