MP-LADS-Installation of Solar All in One High Mast Light near Amal College, Mylambadi - Chaliyar GP

Amount

Electrical

90.15.2.3:Supply installation testing and commissioning of High Mast using Octogaonal Pole made single/two sections of hot dip galvanised GI sheet 100mm top diameter, 360mm bottom diameter thickness 3mm mm suitable for wind speed as per IS 875 Part III with head frame assembly two point suspension system with steel wire rope 5mm dia double drum winching system w and including round arm galvanized luminary carriage suitable to install 6/8 nos luminaries in symmetrical arrangement control gear box and lighting spikes with single phase operation power tool installed inside the base compartment including connector foundation bolt 4 nos fixed in existing RCC foundation and junction box etc, complete 12 Meters

OD100422/2024-2025:Supply Conveyance, installation, testing and commissioning of 100W ALL-IN-ONE Solar Street Light providing Hybrid operation(can work on AC and DC) with High Efficiency Mono Crystalline Solar PV Module, Lithium Ferro Phosphate battery with Inbuilt BMS technology, High Efficacy LED, MPPT Solar Charge Controller & Aluminium Extruded body specially designed by Intelligent Dimming which automatically control the dimming and brightness of light to optimise back-up duration. Solar PV Module : 170 Wp Monocrystalline, rated at STC, Battery (LiFeP04) with BMS : 25.6 V 30 Ah rated capacity at 25 deg C, Solar Charge Controller : MPPT, Efficiency >=90 %, LED Make : Osram / Nichia / Cree / Lumiled/ Bridgelux/ Equivalent, LED viewing angle :120º, Color Temperature : 5700 K, System Luminous Flux > 15000 lumens, Life Span > 50000 hours, Driver : In Built DC- DC type, Dust and Water protection IP 65 Standards for components , Body type : Aluminum Extruded Body with mounting frame provided Other protections : a. Over-Charge protection b. Deep-discharge protection c. Over current protection d. Short circuit protection e. Over voltage protection

14.1:Excavation for foundation in soft soil including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 metres.

14.10:Providing and laying in position reinforced cement concrete 1 :2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc. including form work etc. as required (excluding reinforcement).

14.12:Providing 15mm thick cement plaster of mix 1:4(1 cement: 4 fine sand) at all levels

OD100414/2024-2025:Steel reinforcement for RCC Work including straightening, cutting, bending, placing in position and binding all complete.

90.6.5.12:Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.3 core 2.50 sq mm

OD100415/2024-2025:Supply and installation of dust and vermin proof Three-phase Sintex Meterboard (GS MB?6535) 650*350*250 and to fix kseb meters, fuse unit, CTs, etc. as required including fixing it on the wall, making good the damages, color washing, etc. as required

OD100416/2024-2025:Supplying and fixing 32A, Bakelite HRC fuse with HRC fuse link with connection, in the existing meter board

OD100417/2024-2025:Supplying and fixing 32A, 2 way Neutral link mounted on DMC/SMC base with connection, in the existing meter board

2.10.3:Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Double pole

2.14.2:Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

2.10.1:Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole

OD100418/2024-2025:Supply,installation,testing and commissioning of 40A, 2pole , AC1 rated power contactor with 1NO+1NC auxiliary contacts with AC coil and 24Hours timer for operating automatic ON-OFF function suitable for single phase supply

OD100419/2024-2025:Supply and Fixing of 1P+N,40KA,1 module surge protector on existing MCB DB/enclosure/Meter Board etc and giving connection as required. (Schneider A9L40500 or equivalent).

OD100420/2024-2025:Supplying and Fixing DIN rail inside the existing MCB DB/ Panel/Meter board etc

90.14.5:Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board

2.21:Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.

5.4:Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

5.13:Providing and laying earth connection from earth electrode with 4.00 mm dia copper wire in 15mm dia G.I. pipe from earth electrode including connection with copper thimble excavation and re-filling as required.

OD100421/2024-2025:Providing and fixing Granite Board of 500 mm X 400 mm, with inscription on front side as required as per the instruction

BOSS LIGHT (BID ID -2089390)

Bidder Name

BOSS LIGHT

Hamilltton Technologies