Loading
Loading…
Loading…
Tender Value
₹1.4 Cr
EMD Value
₹2.9 L
Closing Date
25 Sept 2026, 3:00 pm
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
WORKS 2
14 conditions · 3 needing a document upload
Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of V/N or "V" whichever is less; Where V=Advertised value of the tender in crores of Rupees, N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Electrical contractor license: - The contractor should have valid electrical contractor license issued by government and submit along with tender document. If valid electrical contractor license is not submitted along with tender document, then offer will be summarily rejected.
Technical Eligibility Criteria: (a)The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii)One similar work costing not less than the amount equal to 60% of advertised value of the tender. The Definition of similar nature in this tender means "Any Electrical work related to HT/LT installations". (Authority: PCEE / NWR / JP letter No EL/50/0/SNW/Vol.I Dtd. 08.01.2016).
3 conditions · 1 needing a document upload
Bidder / Tenderer should submit GST registration certificate along with PAN card & Bank mandate while bidding / uploading tender documents.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
I / We have visited the works site and I / We am / are aware of the site conditions.
Electrical work in connection with (A) provision of new station building with - (i) booking office, waiting hall, 02 nos waiting room, retiring room at Makrana (NSG-4) category station, (ii) booking office, waiting hall, waiting room at NAWA city station (NSG-5) category station, (iii) provision of second entry with -booking office, waiting hall at RKB station (NSG-5) (B) Electrical work in connection with provision of new additional high level full length platform no.2 with 03 seater benches, water booths, 03 bay platform shelters & pathway for inter platform movement of wheel chairs at Marwar Lohawat, Tivari, Marwar Mathania (03) stations in the section of Sr.DEN/Central.
21Rof2026-27~NWR
21Rof2026-27
Open
Works - General
12 Months
Jodhpur, Rajasthan
₹0
₹2.9 L
3 Sept 2026
3 Sept 2026
11 Sept 2026
150 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 1,42,70,707.68 | ||
| — | 420.00 | — | — | ||
| Design, manufacture, display supply of wall / hanging / floor mounting type LED illuminated sign / direction boards in half elliptical shape. The display sheet shall be of unbreakable 040 translucent polycarbonate sheet of 2 mm thickness. The text / graphics matter visibility shall not be less than 160 deg. The approved colour text and graphics shall be printed / router cut on monomeric calendared vinyl of 70 um thickness and shall be firmly pasted on display sheets. The mounting arrangement shall be hanging, wall mounting, ceiling mounting, pole mounting or floor mounting and as per site requirement. The signage shall have the integral mounting arrangements with sturdy structural frame and ACP cladding on the back side of the signage to avoid rusting and entry of dust. The LED board shall have uniform illumination with 4-8 W / sq. ft and with brightness more than ambient light. Suitable size end cap of 1.5 mm thick SS 304 should be provided. (Inspection- RITES , Inspection Charges -To be borne by railways) | — | — | — | 13,01,265 | |
| — | 420.00 | — | — | ||
| Erection and installation of wall / hanging / floor mounting type LED illuminated sign / direction boards in half elliptical shape. The display sheet shall be of unbreakable 040 translucent polycarbonate sheet of 2 mm thickness. The text / graphics matter visibility shall not be less than 160 deg. The approved colour text and graphics shall be printed / router cut on monomeric calendared vinyl of 70 um thickness and shall be firmly pasted on display sheets. The mounting arrangement shall be hanging, wall mounting, ceiling mounting, pole mounting or floor mounting and as per site requirement. The signage shall have the integral mounting arrangements with sturdy structural frame and ACP cladding on the back side of the signage to avoid rusting and entry of dust. The LED board shall have uniform illumination with 4-8 W / sq. ft and with brightness more than ambient light. Suitable size end cap of 1.5 mm thick SS 304 should be provided(Inspection- Consignee , Inspection Charges - Nil ) | — | — | — | 1,30,124.4 | |
| — | 205.00 | — | — | ||
| Supply, install, test commission of 8Moduler metal flush box with suitable size cover &base frame as per specification(Inspection- Consignee , Inspection Charges - Nil ) | — | — | — | 73,595 | |
| — | 154.00 | — | — | ||
| Supply, install, test commission of 4Modular metal flush box with suitable size cover &base frame as per specification(Inspection- Consignee , Inspection Charges - Nil ) | — | — | — | 41,675.48 | |
| — | 93.00 | — | — | ||
| Supply, install, test commission of 3Modular metal flush box with suitable size cover &base frame as per specification(Inspection- Consignee , Inspection Charges - Nil ) | — | — | — | 19,158 | |
| — | 82.00 | — | — | ||
| Supply, install, test &commission of 2 Modular metal flush box with suitable size cover &base frame as per specification(Inspection- Consignee , Inspection Charges - Nil ) | — | — | — | 14,012.98 | |
| — | 406.00 | — | — | ||
| Supply, install, test &commission of Modular6amp, 5 Pin Socket as per specification. (Inspection- Consignee , Inspection Charges - Nil ) | — | — | — | 51,156 | |
| — | 612.00 | — | — | ||
| Supply, install, test commission of Modular6amp one way/SPSwitch, ISI marked as per specification(Inspection- Consignee , Inspection Charges - Nil ) | — | — | — | 40,392 | |
| — | 163.00 | — | — | ||
| Supply, install, test commissioning of Modular 16 amp, 3/3(6Pin) Socket as per specification(Inspection- Consignee , Inspection Charges - Nil ) | — | — | — | 33,041.73 | |
| — | 163.00 | — | — | ||
| Supply, install, test commission ofModular16 amp one way/SP Switch , 2 Modular ,ISI marked including connection / wiring on lighting switch board as per specification(Inspection- Consignee , Inspection Charges - Nil ) | — | — | — | 22,657 | |
| — | 54.00 | — | — | ||
| — | — | — | 631.8 | ||
| install, test &commission Consignee , Inspection Charges | :- Supply, | — | — | ||
| — | — | — | plate | ||
| — | 240.00 | — | — | ||
| Supply, install, test commission of Modular socket type Fan regulator (5step , 2 Modular) including connection/wiring on lighting switchboard as per specification(Inspection- Consignee , Inspection Charges - Nil ) | — | — | — | 1,12,656 | |
| — | 290.00 | — | — | ||
| Recessed/Surface conduit wiring system-Supply of material and wiring of LP/TP/FP/Exhaust fan/ Bell point with single core multi strand copper conductor size 1.5 Sq.mm in PVC conduit pipe with 5/6 Amp modular type switch/ceiling rose/batten holder etc. As per specification(Inspection- Consignee , Inspection Charges - Nil ) | — | — | — | 1,13,564 | |
| — | 51.00 | — | — | ||
| "B" Class 50 mm dia GI pipe earth Station with digging pit & refilling with charcoal & salt as per specification.(Inspection- Consignee , Inspection Charges - Nil ) | — | — | — | 66,332.64 | |
| — | 51.00 | — | — | ||
| Inspection Chamber with cover as per specification(Inspection- Consignee , Inspection Charges - Nil ) | — | — | — | 18,500.76 | |
| — | 510.00 | — | — | ||
| Supply & laying of earth connection from earth electrode with 4 mm GI wire properly fixed on wall with wooden gutties etc. as required.(Inspection- Consignee , Inspection Charges - Nil ) | — | — | — | 5,615.1 | |
| — | 20.00 | — | — | ||
| Supply of material with excavation & commission of foundation for pole/panel (C.C. Platform ) etc . As per specification.(Inspection- Consignee , Inspection Charges - Nil ) | — | — | — | 47,141 | |
| — | 4.00 | — | — | ||
| L.T. Panel-I Manufacturing, supplying, testing and commissioning of wall/floor mounted (as per site requirement) LT Distribution board with 01 No. 200 Amp. 4 pole 415 Volt, 50 Hz, thermal magnetic MCCB as incoming and 02 No.100 Amp. 4 pole MCCB, 03 Nos. 40 Amp. 4 pole MCCB as outgoing. .(As per Specification attached)(Inspection- Consignee , Inspection Charges - Nil ) | — | — | — | 3,03,137.32 | |
| — | 40.00 | — | — | ||
| Supply, testing, fixing &commissioning of Exhaust fan 300 mm sweep as per specification attached. (Inspection- Consignee , Inspection Charges - Nil ) | — | — | — | 86,694 | |
| — | 200.00 | — | — | ||
| Supply of material & wiring of sub-main with 2x6 sq mm PVC insulated multi-strand ( 84 /.30 mm ) copper conductor cable in existing laid ( surface / recessed ) PVC conduit pipe and continuous running of PVC insulated copper earth wire of 1 Sq.mm. as per specifications attached as required.(Inspection- Consignee , Inspection Charges - Nil ) | — | — | — | 23,544 | |
| — | 390.00 | — | — | ||
| Supply of material & wiring of sub-main with 2x4 sq mm PVC insulated multi-strand ( 56 /0.3 mm ) cooper conductor cable in existing laid ( surface / recessed ) PVC conduit pipe and continuous running of PVC insulated copper earth wire of 1 Sq.mm. as per specifications attached as required.(Inspection- Consignee , Inspection Charges - Nil ) | — | — | — | 32,490.9 | |
| — | 660.00 | — | — | ||
| Supply of material & wiring of sub-main with 2x2.5 sq mm PVC insulated ( 36 /0.3 mm ) multi-strand copper conductor cable in existing laid ( surface / recessed ) PVC conduit pipe and continuous running of PVC insulated copper earth wire of 1 Sq.mm. as per specifications attached as required(Inspection- Consignee , Inspection Charges - Nil ) | — | — | — | 43,183.8 | |
| — | 340.00 | — | — | ||
| Supply and Fixing of 20 mm dia medium class P.V.C. Pipe along with accessories as required in recess on walls/roof properly including cutting of wall /roof and making good the damages as per specifications attached.(Inspection- Consignee , Inspection Charges - Nil ) | — | — | — | 25,901.2 | |
| — | 100.00 | — | — | ||
| Supply and Fixing of 20 mm dia medium class PVC Pipe along with accessories as required in surface on walls/roof properly with saddles and wooden gutties etc. complete as per specifications attached.(Inspection- Consignee , Inspection Charges - Nil ) | — | — | — | 4,991 | |
| — | 180.00 | — | — | ||
| Supply of material & commissioning of PVC casing caping 25X12 mm with accessories for surface wiring as per specification.(Inspection- Consignee , Inspection Charges - Nil ) | — | — | — | 4,131 | |
| — | 1000.00 | — | — | ||
| Supply of 3 Core 2.5 sq. mm PVC Copper Circular Sheathed Cable with Rigid Conductor as per spec(Inspection- Consignee , Inspection Charges - Nil ) | — | — | — | 1,10,000 | |
| — | 480.00 | — | — | ||
| Assembling, fixing, hanging and making connection of Surface pendent mounted box type tube light fitting/street light fitting as per specification.(Inspection- Consignee , Inspection Charges - Nil ) | — | — | — | 32,923.2 | |
| — | 7.00 | — | — | ||
| Supply, fixing, testing and commissioning of TPN DB 8-way with provision of incoming MCCB of 125A,IP 43/IK09, double door at suitable locations.(Inspection- Consignee , Inspection Charges - Nil ) | — | — | — | 1,01,320.03 | |
| — | 370.00 | — | — | ||
| Supply, Fixing of MCB to be provided in the MCBDB given above including supply of material as required & as per specifications attached-MCB (SP-) 6-32 A(Inspection- Consignee , Inspection Charges - Nil ) | — | — | — | 83,497.9 | |
| — | 30.00 | — | — | ||
| Supply, Fixing of RCCB to be provided in the MCBDB given above including supply of material as required & as per specifications attached-RCCB - 25 A/30mA(Inspection- Consignee , Inspection Charges - Nil ) | — | — | — | 71,377.2 | |
| — | 9.00 | — | — | ||
| Supply, Fixing of MCB TPN to be provided in the MCBDB including supply of material as required & as per specifications attached-MCB(TPN)-63A(Inspection- Consignee , Inspection Charges - Nil ) | — | — | — | 17,766.18 | |
| — | 7.00 | — | — | ||
| Supply, Fixing of MCCB to be provided in the TPN given above including supply of material as required & as per specifications attached- MCCB 4-pole 100/125A, 25 KA(Inspection- Consignee , Inspection Charges - Nil ) | — | — | — | 91,232.82 | |
| — | 20.00 | — | — | ||
| Supply, install, test & commission of Ray roll plug socket 20amp SPN Ray Roll Plug socket including connection /wiring of "C" series 32 amps SP-MCB as per specification. (Inspection- Consignee , Inspection Charges - Nil ) | — | — | — | 16,792 | |
| — | 30.00 | — | — | ||
| Supply. fixing, testing and commissioning of SPN DB 8-way with provision of incoming MCB of 63A,IP 43/IK09, double door at suitable locations.(Inspection- Consignee , Inspection Charges - Nil ) | — | — | — | 72,851.1 | |
| — | 50.00 | — | — | ||
| Supply of Phenolic top sheet wooden board size 7'' x 4'' with one no. 5x15 amp switch socket combined & one nos. 5 amp switch ISI mark make- Anchor/Vinay/ABB/Cona/Legrand as per specification(Inspection- Consignee , Inspection Charges - Nil ) | — | — | — | 6,750 | |
| — | 32.00 | — | — | ||
| Supply of Phenolic top mobile charging wooden board size 6''x15'' fitted with 4 nos. switch & 4 nos. socket of 6 amps with internal wiring of 1.5 sq. mm with base plate of both side particle board for mobile with hanging clip as per specification(Inspection- Consignee , Inspection Charges - Nil ) | — | — | — | 11,136 | |
| — | 5500.00 | — | — | ||
| Supply of XLPE insulated, PVC sheathed armoured Aluminium multi strand conductor cable 1100V grade, as per specification attached. 4 Core 70 sq mm(Inspection- RITES , Inspection Charges - To be borne by railways) | — | — | — | 18,21,435 | |
| — | 2000.00 | — | — | ||
| Supply of XLPE insulated, PVC sheathed armoured Aluminium multi strand conductor cable 1100V grade, as per specification attached. 4 Core 50 sq mm(Inspection- Consignee , Inspection Charges - Nil ) | — | — | — | 4,84,000 | |
| — | 10000.00 | — | — | ||
| Supply of XLPE insulated, PVC sheathed armoured Aluminium multi strand conductor cable 1100V grade, as per specification attached. 4 Core 16 sq mm(Inspection- RITES , Inspection Charges - To be borne by railways) | — | — | — | 10,40,000 | |
| — | 13500.00 | — | — | ||
| Digging and filling of trench size 0.4 x 0.8 mtr as per spec ( trench work may be on kuchcha/ pucca land and all type of soil as per site requirement and without protective layer of brick). Surface of trench shall be made good in all respect and satisfaction of site engineer. (Inspection- Consignee , Inspection Charges - Nil ) | — | — | — | 5,15,700 | |
| — | 300.00 | — | — | ||
| laying cable in Air/Wall/Pole with fixture(02 specification(Inspection- Consignee , Inspection Charges - Nil ) | — | — | — | 6,849 | |
| — | — | — | mtrs) | ||
| — | 13500.00 | — | — | ||
| Supply and laying of HDPE pipe confirming to IS 4984:1995, 50 mm dia, wall thickness 3 mm, PN 6 under the road. The work involves laying of HDPE pipe including laying of cable in HDPE pipe also.(Inspection- RITES , Inspection Charges - To be borne by railways) | — | — | — | 12,49,830 | |
| — | 800.00 | — | — | ||
| Drilling of horizontal bore below track/road by pushing method for laying of RCC/HDPE/DWC pipe of various sizes (As per specifications)(Inspection- Consignee , Inspection Charges - Nil ) | — | — | — | 10,69,704 | |
| — | 800.00 | — | — | ||
| Supply & laying of HDPE pipe, dia 160 mm under road/ground/floor/railway track or as per site requirement in already excavated trench. (As per specification)(Inspection- RITES , Inspection Charges - To be borne by railways) | — | — | — | 5,93,400 | |
| — | 60.00 | — | — | ||
| Supplying., laying of GI pipe size 50 mm dia. B class as per IS1239 for cable use as per specification enclosed(Inspection- Consignee , Inspection Charges - Nil ) | — | — | — | 19,390.2 | |
| — | 40.00 | — | — | ||
| Supply, fixing, testing and connecting of wall mounted heavy duty Air Circulator of 24''(600mm) size with built in 3 speed regulator, delivers Air 280Cu.m/min, similar to M/s Almonard make with all accessories complete confirming to IS specification with latest amendments. The Air Circulator is to be fixed by suitable MS clamps of size 50x50x6mm / flats of size 40x6mm with bolts and nuts etc., complete as desired by site engineer.(Inspection- Consignee , Inspection Charges - Nil ) | — | — | — | 3,74,304.4 | |
| — | 2.00 | — | — | ||
| Supply, erection, testing & commissioning of 12.50 Mtrs. high mast shaft totally hot dip galvanized and suitable for wind velocity as per IS 875 PART 3. The mast shaft shall be in two finished section. it shall also include accessories for 12.5 Mtrs. high mast including head frame, steel wire rope 6 mm dia. (7/19 construction ) double drum winch, galvanized lantern carriage arrangement suitable for 6 luminaries symmetrically and its control gear boxes and lighting finial with integral power tool. The work also include design and casting of suitable foundation bolts with M-15 Concrete for high mast considering the safe soil bearing capacity at site as 10T per Sq. mm at 2 Mtrs. depth. the foundation should be casted with foundation bolt manufactured with special steel along with nuts, washers, anchors plates and templates as required make: BAJAJ/PHILIPS or similar. The mast shall have one longitudinal weld and single dipping (hot dip galvanized) per section (as per specification attached).(Inspection- Consignee , Inspection Charges - Nil ) | — | — | — | 2,95,308.44 | |
| — | 2.00 | — | — | ||
| Supply & installation of control panel housing suitable timer contactor circuit for Automatic switch ON & switch OFF of the mast at a preset time.(Inspection- Consignee , Inspection Charges - Nil ) | — | — | — | 33,535.8 | |
| — | 2.00 | — | — | ||
| Supply and fixing of aviation light luminaires of BGAV 302 LED of Bajaj or similar comprising of aluminium housing with polycarbonate enclosure (1 fitting per mast is necessary if no taller structures are in the vicinity). Fitting should be of reputed make and as per tech. spec. (Inspection- Consignee , Inspection Charges - Nil ) | — | — | — | 7,927.02 | |
| — | 1.00 | — | — | ||
| Shifting, carrying, transportation, installation, testing and commissioning of LT panels/ APFC panels from old location to new location situated nearby area including cabling, trenching, connection to panel and c/c foundation for panels if required with including all necessary accessories for carried out the work etc .(Cable will be supplied by railway)(Inspection- Consignee , Inspection Charges - Nil ) | — | — | — | 6,050 | |
| — | 40.00 | — | — | ||
| Supply, Testing & Fixing of wall mounted cabin fan with regulator three speed, suitable for 220- 230 volt ,50HZ AC supply .Model No-Media BW 04 of Bajaj or similar to Usha/ Crompton Greaves /Philips or similar.(Inspection- Consignee , Inspection Charges - Nil ) | — | — | — | 73,715.2 | |
| — | 28.00 | — | — | ||
| Supply, Fixing, testing and commissioning of LED panel light 36watt of size 2'X2' similar to Philips Full Glow model No. RC 380B LED 34S-6500 L60W60 PSD OD S1 or similar (Inspection- Consignee , Inspection Charges - Nil ) | — | — | — | 33,040 | |
| — | 14.00 | — | — | ||
| Supply, fixing, testing and commissioning of fabricated Feeder Pillar distribution box made of MS sheet 1.6mmthick size 600x300x600mmwith suitable MS stand Copper bus bar of 200Acapacity and 2x63A MCB 4pole as per spec(Inspection- Consignee , Inspection Charges - Nil ) | — | — | — | 75,684 | |
| — | 3.00 | — | — | ||
| Supply, Installation and commissioning Roof Mounted HVLS Fan 12 feet Dia with all accessories and suitable C channel with anchor fasteners and necessary civil job as per site requirement with 03 years warranty maintenance as per specification attached(Inspection- RITES , Inspection Charges - To be borne by railways) | — | — | — | 5,25,952.44 | |
| — | 20.00 | — | — | ||
| Supply, fixing and making connection of LED Down lighter (Cool white) power -9W Max, suitable to work on 230 V AC, 50 HZ similar to model No. 30945 of Philips or equivalent of Bajaj/Wipro/CG or similar (Inspection- Consignee , Inspection Charges - Nil ) | — | — | — | 25,569.2 | |
| — | 24.00 | — | — | ||
| Supply, Fixing testing and commissioning of Key Card Switch 2M with Key Tag 40 Amp, 230 V, 2NO 2 M white plate, Flush Box, contactor and SP/DP plastic enclosure, Make Legrand or similar(Inspection- Consignee , Inspection Charges - Nil ) | — | — | — | 1,03,895.28 | |
| — | 6.00 | — | — | ||
| Supply installation, testing and commissioning of 0.5 HP Mono block Pump as per specification(Inspection- Consignee , Inspection Charges - Nil ) | — | — | — | 34,521.36 | |
| — | 40.00 | — | — | ||
| Design, Manufacturer, Supply, fixing at Specified given locations and testing, commissioning of LED based station Name Board in Hindi/English as per given size of letters and as per specification.(Inspection- Consignee , Inspection Charges - Nil ) | — | — | — | 2,88,150.8 | |
| — | 4.00 | — | — | ||
| Installation of Split Air Conditioner as per spec(Inspection- Consignee , Inspection Charges - Nil ) | — | — | — | 17,460.4 | |
| — | 160.00 | — | — | ||
| Supply, fixing, testing & connecting of LED backlit single sided signage boards within IP-65 CRCA housing, vinyl print on acrylic sheet which is backlit with high grade, high brightness LED modules, inbuilt SMPS driver, without battery backup, operating voltage 80v-270V AC, life period >50000 hrs, LPM technology, including fabrication and supply of clamping arrangements as desired by site engineer.(Inspection- Consignee , Inspection Charges - Nil ) | — | — | — | 2,27,177.6 | |
| — | 80.00 | — | — | ||
| Supply, fixing, testing & connecting of LED backlit double sided signage boards within IP-65 CRCA housing, vinyl print on acrylic sheet which is backlit with high grade, high brightness LED modules, inbuilt SMPS driver, without battery backup, operating voltage 80v-270V AC, life period >50000 hrs, LPM technology, including fabrication and supply of clamping arrangements as desired by site engineer.\(Inspection- Consignee , Inspection Charges - Nil ) | — | — | — | 2,03,722.4 | |
| — | 150.00 | — | — | ||
| Supply of material and wiring of shed TP/FP with 1.5 sq mm single core multi- stranded copper wire PVC insulated in conduit 1.5mm thick 19mm size white colour shall be fixed with junction box TEE and 1.5minsq PVC CU cable insulated multi stranded for earth wire and 5/6A,ceiling rose. The conduit shall be fixed with raw plugs/ tied with 14SWG copper wire including connection as per spec.(Inspection- Consignee , Inspection Charges - Nil ) | — | — | — | 18,019.5 | |
| — | 150.00 | — | — | ||
| Supply and fixing of PVC cable duct 40 x 60 (w x h) 1 M STD slot greenish gray of standard make as per specification(Inspection- Consignee , Inspection Charges - Nil ) | — | — | — | 15,657 | |
| — | 150.00 | — | — | ||
| Supply, drawing, testing and commissioning of PVC copper wire 6 sqmm as per specification(Inspection- Consignee , Inspection Charges - Nil ) | — | — | — | 5,302.5 | |
| — | 10.00 | — | — | ||
| Supply and fixing of cover / plate of hot dip galvanized pole (5/7 mtr.) as per specification.(Inspection- Consignee , Inspection Charges - Nil ) | — | — | — | 5,242.9 | |
| — | 150.00 | — | — | ||
| Supply fabrication, erection, testing and commissioning of G.I. octagonal pole 5 mtrs. long double arm suitable for street light fixture, 2 x 36w including digging of pit, making foundation and muffing with cement, concrete 1:2:6. As per specification.(Inspection- RITES, Inspection Charges - To be borne by railways) | — | — | — | 14,67,786 | |
| — | 12.00 | — | — | ||
| J' type cable route marker made of cast iron as per approved Railway drawing. (Inspection- Consignee , Inspection Charges - Nil ) | — | — | — | 2,496.12 | |
| — | 20.00 | — | — | ||
| Supply, fixing, testing & commissioning of AC single phase static Energy Meter 5-30 A capacity to measure & display of unit (KWH), Ampere (I), Voltage (V), Load (KW), maximum demand (KW) including last six month history of Energy etc. of accuracy class 1.0, 240 V, 50 Hz with backlit LCD display confirming to IS:13779 or latest. Make: Secure, Indotech, L&T, HPL, CG, Genus or similar.(Inspection- Consignee , Inspection Charges - Nil ) | — | — | — | 48,320 | |
| — | 2.00 | — | — | ||
| Supply, lowering , testing & commissioning of 3 star and above rated mono block submersible pump cap., 10 HP, head 35 m, dis. 510 LPM. As per BEE approved MONOBLOCK(Inspection- Consignee , Inspection Charges - Nil ) | — | — | — | 75,578.1 | |
| — | 2.00 | — | — | ||
| Supply, lowering , testing & commissioning of 3 star and above rated submersible pump cap., 15 HP, head 146 m, dis. 210 LPM. as per BEE approved. This work is to be include lifting of existing submersible pump and shall be deposit in the store of site supervisor(Inspection- Consignee , Inspection Charges - Nil ) | — | — | — | 96,015.6 | |
| — | 4.00 | — | — | ||
| Design, manufacture, Supply, fixing, testing & commissioning of Fully automatic type Star Delta Starter panel for Submersible pumps Of Model No.MUG-20 Relay Range 13-21 of L&T or Similar model of BCH,C&S or similar(Inspection- Consignee , Inspection Charges - Nil ) | — | — | — | 36,716.48 | |
| — | 200.00 | — | — | ||
| Supply and drawing of PVC insulated 3 core sheathed Flat copper submersible cable 1100 volt grade conf. to IS: 694/1990 with latest amendments, size 6 sq mm. as per spec (Inspection- Consignee , Inspection Charges - Nil ) | — | — | — | 56,686 | |
| — | 160.00 | — | — | ||
| Supplying, connecting, fixing and lowering of GI pipe 2" Dia ISI marked medium density within the tube well / UG tank including supply & fixing of suitable size accessories like flange ,safety clamp , cable clamp, pipe fittings, bends, socket etc. as required and excluding flat copper cable. This work is to be replaced with existing work and released GI pipe shall be deposit in the store of site supervisor as per spec (Inspection- Consignee , Inspection Charges - Nil ) | — | — | — | 85,326.4 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
ACS1TO12newCOMPRESSED.pdf ACS01to12of GCC2022
ATTACHMENT
SOR21Rof2026-27.pdf
ATTACHMENT
TD21Rof26-27.pdf
ATTACHMENT
ACS1TO12newCOMPRESSED.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .